Network Working Group R. Robert Internet-Draft Phoenix R&D Intended status: Informational 23 October 2023 Expires: 25 April 2024 The Messaging Layer Security (MLS) Extensions draft-ietf-mls-extensions-03 Abstract This document describes extensions to the Messaging Layer Security (MLS) protocol. Discussion Venues This note is to be removed before publishing as an RFC. Source for this draft and an issue tracker can be found at https://github.com/mlswg/mls-extensions. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 25 April 2024. Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components Robert Expires 25 April 2024 [Page 1] Internet-Draft MLS October 2023 extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Change Log . . . . . . . . . . . . . . . . . . . . . . . 3 2. Safe Extensions . . . . . . . . . . . . . . . . . . . . . . . 4 2.1. Safe Extension API . . . . . . . . . . . . . . . . . . . 4 2.1.1. Security . . . . . . . . . . . . . . . . . . . . . . 5 2.1.2. Common Data Structures . . . . . . . . . . . . . . . 5 2.1.3. Hybrid Public Key Encryption (HPKE) . . . . . . . . . 6 2.1.4. Signature Keys . . . . . . . . . . . . . . . . . . . 7 2.1.5. Exporting Secrets . . . . . . . . . . . . . . . . . . 7 2.1.6. Pre-Shared Keys (PSKs) . . . . . . . . . . . . . . . 8 2.1.7. Extension Designer Tools . . . . . . . . . . . . . . 9 2.2. Extension Design Guidance . . . . . . . . . . . . . . . . 11 2.2.1. Storing State in Extensions . . . . . . . . . . . . . 11 3. Extensions . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.1. AppAck . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.1.1. Description . . . . . . . . . . . . . . . . . . . . . 12 3.2. Targeted messages . . . . . . . . . . . . . . . . . . . . 13 3.2.1. Description . . . . . . . . . . . . . . . . . . . . . 13 3.2.2. Format . . . . . . . . . . . . . . . . . . . . . . . 14 3.2.3. Encryption . . . . . . . . . . . . . . . . . . . . . 15 3.2.4. Authentication . . . . . . . . . . . . . . . . . . . 16 3.2.5. Guidance on authentication schemes . . . . . . . . . 18 3.3. Content Advertisement . . . . . . . . . . . . . . . . . . 18 3.3.1. Description . . . . . . . . . . . . . . . . . . . . . 18 3.3.2. Syntax . . . . . . . . . . . . . . . . . . . . . . . 19 3.3.3. Expected Behavior . . . . . . . . . . . . . . . . . . 20 3.3.4. Framing of application_data . . . . . . . . . . . . . 20 3.4. SelfRemove Proposal . . . . . . . . . . . . . . . . . . . 21 3.4.1. Extension Description . . . . . . . . . . . . . . . . 21 3.5. Last resort KeyPackages . . . . . . . . . . . . . . . . . 23 3.5.1. Description . . . . . . . . . . . . . . . . . . . . . 23 3.5.2. Format . . . . . . . . . . . . . . . . . . . . . . . 24 4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 24 4.1. MLS Wire Formats . . . . . . . . . . . . . . . . . . . . 24 4.1.1. MLS Extension Message . . . . . . . . . . . . . . . . 24 4.2. MLS Extension Types . . . . . . . . . . . . . . . . . . . 24 4.2.1. targeted_messages_capability MLS Extension . . . . . 24 4.2.2. targeted_messages MLS Extension . . . . . . . . . . . 25 4.2.3. accepted_media_types MLS Extension . . . . . . . . . 25 4.2.4. required_media_types MLS Extension . . . . . . . . . 25 4.2.5. last_resort_key_package MLS Extension . . . . . . . . 26 4.3. MLS Proposal Types . . . . . . . . . . . . . . . . . . . 26 Robert Expires 25 April 2024 [Page 2] Internet-Draft MLS October 2023 4.3.1. Extension Proposal . . . . . . . . . . . . . . . . . 26 4.3.2. Extension Path Proposal . . . . . . . . . . . . . . . 26 4.3.3. Extension External Proposal . . . . . . . . . . . . . 27 4.3.4. AppAck Proposal . . . . . . . . . . . . . . . . . . . 27 4.3.5. SelfRemove Proposal . . . . . . . . . . . . . . . . . 27 4.4. MLS Credential Types . . . . . . . . . . . . . . . . . . 27 4.4.1. Extension Credential . . . . . . . . . . . . . . . . 28 4.5. MLS Signature Labels . . . . . . . . . . . . . . . . . . 28 4.5.1. Labeled Extension Content . . . . . . . . . . . . . . 28 5. Security considerations . . . . . . . . . . . . . . . . . . . 28 5.1. AppAck . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.2. Targeted Messages . . . . . . . . . . . . . . . . . . . . 28 5.3. Content Advertisement . . . . . . . . . . . . . . . . . . 28 5.4. SelfRemove . . . . . . . . . . . . . . . . . . . . . . . 29 6. References . . . . . . . . . . . . . . . . . . . . . . . . . 29 6.1. Normative References . . . . . . . . . . . . . . . . . . 29 6.2. Informative References . . . . . . . . . . . . . . . . . 29 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 30 1. Introduction This document describes extensions to [mls-protocol] that are not part of the main protocol specification. The protocol specification includes a set of core extensions that are likely to be useful to many applications. The extensions described in this document are intended to be used by applications that need to extend the MLS protocol. 1.1. Change Log RFC EDITOR PLEASE DELETE THIS SECTION. draft-03 * Add Last Resort KeyPackage extension * Add Safe Extensions framework * Add SelfRemove Proposal draft-02 * No changes (prevent expiration) draft-01 * Add Content Advertisement extensions Robert Expires 25 April 2024 [Page 3] Internet-Draft MLS October 2023 draft-00 * Initial adoption of draft-robert-mls-protocol-00 as a WG item. * Add Targeted Messages extension (*) 2. Safe Extensions The MLS specification is extensible in a variety of ways (see Section 13 of the [RFC9420]) and describes the negotiation and other handling of extensions and their data within the protocol. However, it does not provide guidance on how extensions can or should safely interact with the base MLS protocol. The goal of this section is to simplify the task of developing MLS extensions. More concretely, this section defines the Safe Extension API, a library of extension components which simplifies development and security analysis of extensions, provides general guidance on using the built-in functionality of the base MLS protocol to build extensions, defines specific examples of extensions built on top of the Safe Extension API alongside the built-in mechanisms of the base MLS protocol, defines a number of labels registered in IANA which can be safely used by extensions, so that the only value an extension developer must add to the IANA registry themselves is a unique ExtensionType. 2.1. Safe Extension API The Safe Extension API is a library that defines a number of components from which extensions can be built. In particular, these components provide extensions the ability to: * Make use of selected private and public key material from the MLS specification, e.g. to encrypt, decrypt, sign, verify and derive fresh key material. * Inject key material via PSKs in a safe way to facilitate state agreement without the use of a group context extension. * Export secrets from MLS in a way that, in contrast to the built-in export functionality of MLS, preserves forward secrecy of the exported secrets within an epoch. The Safe Extension API is not an extension itself, it only defines components from which other extensions can be built. Some of these components modify the MLS protocol and, therefore, so do the extensions built from them. Robert Expires 25 April 2024 [Page 4] Internet-Draft MLS October 2023 Where possible, the API makes use of mechanisms defined in the MLS specification. For example, part of the safe API is the use of the SignWithLabel function described in Section 5.1.2 of [RFC9420]. 2.1.1. Security An extension is called safe if it does not modify the base MLS protocol or other MLS extensions beyond using components of the Safe Extension API. The Safe Extension API provides the following security guarantee: If an application uses MLS and only safe MLS extensions, then the security guarantees of the base MLS protocol and the security guarantees of safe extensions, each analyzed in isolation, still hold for the composed extended MLS protocol. In other words, the Safe Extension API protects applications from careless extension developers. As long as all used extensions are safe, it is not possible that a combination of extensions (the developers of which did not know about each other) impedes the security of the base MLS protocol or any used extension. No further analysis of the combination is necessary. This also means that any security vulnerabilities introduced by one extension do not spread to other extensions or the base MLS. 2.1.2. Common Data Structures Most components of the Safe Extension API use the value ExtensionType which is a unique uint16 identifier assigned to an extension in the MLS Extension Types IANA registry (see Section 17.3 of [RFC9420]). Most Safe Extension API components also use the following data structure, which provides domain separation by extension_type of various extension_data. struct { ExtensionType extension_type; opaque extension_data; } ExtensionContent; Where extension_type is set to the type of the extension to which the extension_data belongs. If in addition a label is required, the following data structure is used. struct { opaque label; ExtensionContent extension_content; } LabeledExtensionContent; Robert Expires 25 April 2024 [Page 5] Internet-Draft MLS October 2023 2.1.3. Hybrid Public Key Encryption (HPKE) This component of the Safe Extension API allows extensions to make use of all HPKE key pairs generated by MLS. An extension identified by an ExtensionType can use any HPKE key pair for any operation defined in [RFC9180], such as encryption, exporting keys and the PSK mode, as long as the info input to SetupS and SetupR is set to LabeledExtensionContent with extension_type set to ExtensionType. The extension_data can be set to an arbitrary Context specified by the extension designer (and can be empty if not needed). For example, an extension can use a key pair PublicKey, PrivateKey to encrypt data as follows: SafeEncryptWithContext(ExtensionType, PublicKey, Context, Plaintext) = SealBase(PublicKey, LabeledExtensionContent, "", Plaintext) SafeDecryptWithContext(ExtensionType, PrivateKey, Context, KEMOutput, Ciphertext) = OpenBase(KEMOutput, PrivateKey, LabeledExtensionContent, "", Ciphertext) Where the fields of LabeledExtensionContent are set to label = "MLS 1.0 ExtensionData" extension_type = ExtensionType extension_data = Context For operations involving the secret key, ExtensionType MUST be set to the ExtensionType of the implemented extension, and not to the type of any other extension. In particular, this means that an extension cannot decrypt data meant for another extension, while extensions can encrypt data to other extensions. In general, a ciphertext encrypted with a PublicKey can be decrypted by any entity who has the corresponding PrivateKey at a given point in time according to the MLS protocol (or extension). For convenience, the following list summarizes lifetimes of MLS key pairs. * The key pair of a non-blank ratchet tree node. The PrivateKey of such a key pair is known to all members in the node’s subtree. In particular, a PrivateKey of a leaf node is known only to the member in that leaf. A member in the subtree stores the PrivateKey for a number of epochs, as long as the PublicKey does not change. The key pair of the root node SHOULD NOT be used, since the external key pair recalled below gives better security. * The external_priv, external_pub key pair used for external initialization. The external_priv key is known to all group members in the current epoch. A member stores external_priv only Robert Expires 25 April 2024 [Page 6] Internet-Draft MLS October 2023 for the current epoch. Using this key pair gives better security guarantees than using the key pair of the root of the ratchet tree and should always be preferred. * The init_key in a KeyPackage and the corresponding secret key. The secret key is known only to the owner of the KeyPackage and is deleted immediately after it is used to join a group. 2.1.4. Signature Keys MLS session states contain a number of signature keys including the ones in the LeafNode structs. Extensions can safely sign content and verify signatures using these keys via the SafeSignWithLabel and SafeVerifyWithLabel functions, respectively, much like how the basic MLS protocol uses SignWithLabel and VerifyWithLabel. In more detail, an extension identified by ExtensionType should sign and verify using: SafeSignWithLabel(ExtensionType, SignatureKey, Label, Content) = SignWithLabel(SignatureKey, "LabeledExtensionContent", LabeledExtensionContent) SafeVerifyWithLabel(ExtensionType, VerificationKey, Label, Content, SignatureValue) = VerifyWithLabel(VerificationKey, "LabeledExtensionContent", LabeledExtensionContent, SignatureValue) Where the fields of LabeledExtensionContent are set to label = Label extension_type = ExtensionType extension_data = Content For signing operations, the ExtensionType MUST be set to the ExtensionType of the implemented extension, and not to the type of any other extension. In particular, this means that an extension cannot produce signatures in place of other extensions. However, extensions can verify signatures computed by other extensions. Note that domain separation is ensured by explicitly including the ExtensionType with every operation. 2.1.5. Exporting Secrets An extension can use MLS as a group key agreement protocol by exporting symmetric keys. Such keys can be exported (i.e. derived from MLS key material) in two phases per epoch: Either at the start of the epoch, or during the epoch. Derivation at the start of the epoch has the added advantage that the source key material is deleted after use, allowing the derived key material to be deleted later even during the same MLS epoch to achieve forward secrecy. The following Robert Expires 25 April 2024 [Page 7] Internet-Draft MLS October 2023 protocol secrets can be used to derive key from for use by extensions: * epoch_secret at the beginning of an epoch * extension_secret during an epoch The extension_secret is an additional secret derived from the epoch_secret at the beginning of the epoch in the same way as the other secrets listed in Table 4 of [RFC9420] using the label "extension". Any derivation performed by an extension either from the epoch_secret or the extension_secret has to use the following function: DeriveExtensionSecret(Secret, Label) = ExpandWithLabel(Secret, "ExtensionExport " + ExtensionType + " " + Label) Where ExpandWithLabel is defined in Section 8 of [RFC9420] and where ExtensionType MUST be set to the ExtensionType of the implemented extension. 2.1.6. Pre-Shared Keys (PSKs) PSKs represent key material that is injected into the MLS key schedule when creating or processing a commit as defined in Section 8.4 of [RFC9420]. Its injection into the key schedule means that all group members have to agree on the value of the PSK. While PSKs are typically cryptographic keys which due to their properties add to the overall security of the group, the PSK mechanism can also be used to ensure that all members of a group agree on arbitrary pieces of data represented as octet strings (without the necessity of sending the data itself over the wire). For example, an extension can use the PSK mechanism to enforce that all group members have access to and agree on a password or a shared file. This is achieved by creating a new epoch via a PSK proposal. Transitioning to the new epoch requires using the information agreed upon. To facilitate using PSKs in a safe way, this document defines a new PSKType for extensions. This provides domain separation between pre- shared keys used by the core MLS protocol and applications, and between those used by different extensions. Robert Expires 25 April 2024 [Page 8] Internet-Draft MLS October 2023 enum { reserved(0), external(1), resumption(2), extensions(3), (255) } PSKType; struct { PSKType psktype; select (PreSharedKeyID.psktype) { case external: opaque psk_id; case resumption: ResumptionPSKUsage usage; opaque psk_group_id; uint64 psk_epoch; case extensions: ExtensionType extension_type; opaque psk_id; }; opaque psk_nonce; } PreSharedKeyID; 2.1.7. Extension Designer Tools The safe extension API allows extension designers to sign and encrypt payloads without the need to register their own IANA labels. Following the same pattern, this document also provides ways for extension designers to define their own wire formats, proposals and credentials. 2.1.7.1. Wire Formats Extensions can define their own MLS messages by using the mls_extension_message MLS Wire Format. The mls_extension_message Wire Format is IANA registered specifically for this purpose and extends the select statement in the MLSMessage struct as follows: case mls_extension_message: ExtensionContent extension_content; The extension_type in extension_content MUST be set to the type of the extension in question. Processing of self-defined wire formats has to be defined by the extension. Robert Expires 25 April 2024 [Page 9] Internet-Draft MLS October 2023 2.1.7.2. Proposals Similar to wire formats, extensions can define their own proposals by using one of three dedicated extension proposal types: extension_proposal, extension_path_proposal and extension_external_propsal. Each type contains the same ExtensionContent struct, but is validated differently: extension_proposal requires no UpdatePath and can not be sent by an external sender extension_path_proposal requires an UpdatePath and can not be sent by an external sender extensions_external_proposal requires no UpdatePath and can be sent by an external sender. Each of the three proposal types is IANA registered and extends the select statement in the Proposal struct as follows: case extension_proposal: ExtensionContent extension_content; case extension_path_proposal: ExtensionContent extension_content; case extension_external_proposal: ExtensionContent extension_content; The extension_type MUST be set to the type of the extension in question. Processing and validation of self-defined proposals has to be defined by the extension. However, validation rules can lead to a previously valid commit to become invalid, not the other way around. This is with the exception of proposal validation for external commits, where self-defined proposals can be declared valid for use in external commits. More concretely, if an external commit is invalid, only because the self-defined proposal is part of it (the last rule in external commit proposal validation in Section 12.2 of [RFC9420]), then the self-defined validation rules may rule that the commit is instead valid. 2.1.7.3. Credentials Extension designers can also define their own credential types via the IANA registered extension_credential credential type. The extension_credential extends the select statement in the Credential struct as follows: case extension_credential: ExtensionContent extension_content; Robert Expires 25 April 2024 [Page 10] Internet-Draft MLS October 2023 The extension_type in the extension_content must be set to that of the extension in question with the extension_data containing all other relevant data. Note that any credential defined in this way has to meet the requirements detailed in Section 5.3 of the MLS specification. 2.2. Extension Design Guidance While extensions can modify the protocol flow of MLS and the associated properties in arbitrary ways, the base MLS protocol already enables a number of functionalities that extensions can use without modifying MLS itself. Extension authors should consider using these built-in mechanisms before employing more intrusive changes to the protocol. 2.2.1. Storing State in Extensions Every type of MLS extension can have data associated with it and, depending on the type of extension (KeyPackage Extension, GroupContext Extension, etc.) that data is included in the corresponding MLS struct. This allows the authors of an extension to make use of any authentication or confidentiality properties that the struct is subject to as part of the protocol flow. * GroupContext Extensions: Any data in a group context extension is agreed-upon by all members of the group in the same way as the rest of the group state. As part of the GroupContext, it is also sent encrypted to new joiners via Welcome messages and (depending on the architecture of the application) may be available to external joiners. Note that in some scenarios, the GroupContext may also be visible to components that implement the delivery service. * GroupInfo Extensions: GroupInfo extensions are included in the GroupInfo struct and thus sent encrypted and authenticated by the signer of the GroupInfo to new joiners as part of Welcome messages. It can thus be used as a confidential and authenticated channel from the inviting group member to new joiners. Just like GroupContext extensions, they may also be visible to external joiners or even parts of the delivery service. Unlike GroupContext extensions, the GroupInfo struct is not part of the group state that all group members agree on. * KeyPackage Extensions: KeyPackages (and the extensions they include) are pre-published by individual clients for asynchronous group joining. They are included in Add proposals and become part of the group state once the Add proposal is committed. They are, however, removed from the group state when the owner of the Robert Expires 25 April 2024 [Page 11] Internet-Draft MLS October 2023 KeyPackage does the first commit with a path. As such, KeyPackage extensions can be used to communicate data to anyone who wants to invite the owner to a group, as well as the other members of the group the owner is added to. Note that KeyPackage extensions are visible to the server that provides the KeyPackages for download, as well as any part of the delivery service that can see the public group state. * LeafNode Extensions: LeafNodes are a part of every KeyPackage and thus follow the same lifecycle. However, they are also part of any commit that includes an UpdatePath and clients generally have a leaf node in each group they are a member of. Leaf node extensions can thus be used to include member-specific data in a group state that can be updated by the owner at any time. 3. Extensions 3.1. AppAck Type: Proposal 3.1.1. Description An AppAck proposal is used to acknowledge receipt of application messages. Though this information implies no change to the group, it is structured as a Proposal message so that it is included in the group's transcript by being included in Commit messages. struct { uint32 sender; uint32 first_generation; uint32 last_generation; } MessageRange; struct { MessageRange received_ranges; } AppAck; An AppAck proposal represents a set of messages received by the sender in the current epoch. Messages are represented by the sender and generation values in the MLSCiphertext for the message. Each MessageRange represents receipt of a span of messages whose generation values form a continuous range from first_generation to last_generation, inclusive. AppAck proposals are sent as a guard against the Delivery Service dropping application messages. The sequential nature of the generation field provides a degree of loss detection, since gaps in Robert Expires 25 April 2024 [Page 12] Internet-Draft MLS October 2023 the generation sequence indicate dropped messages. AppAck completes this story by addressing the scenario where the Delivery Service drops all messages after a certain point, so that a later generation is never observed. Obviously, there is a risk that AppAck messages could be suppressed as well, but their inclusion in the transcript means that if they are suppressed then the group cannot advance at all. The schedule on which sending AppAck proposals are sent is up to the application, and determines which cases of loss/suppression are detected. For example: * The application might have the committer include an AppAck proposal whenever a Commit is sent, so that other members could know when one of their messages did not reach the committer. * The application could have a client send an AppAck whenever an application message is sent, covering all messages received since its last AppAck. This would provide a complete view of any losses experienced by active members. * The application could simply have clients send AppAck proposals on a timer, so that all participants' state would be known. An application using AppAck proposals to guard against loss/ suppression of application messages also needs to ensure that AppAck messages and the Commits that reference them are not dropped. One way to do this is to always encrypt Proposal and Commit messages, to make it more difficult for the Delivery Service to recognize which messages contain AppAcks. The application can also have clients enforce an AppAck schedule, reporting loss if an AppAck is not received at the expected time. 3.2. Targeted messages 3.2.1. Description MLS application messages make sending encrypted messages to all group members easy and efficient. Sometimes application protocols mandate that messages are only sent to specific group members, either for privacy or for efficiency reasons. Targeted messages are a way to achieve this without having to create a new group with the sender and the specific recipients – which might not be possible or desired. Instead, targeted messages define the format and encryption of a message that is sent from a member of an existing group to another member of that group. Robert Expires 25 April 2024 [Page 13] Internet-Draft MLS October 2023 The goal is to provide a one-shot messaging mechanism that provides confidentiality and authentication. Targeted Messages makes use the Safe Extension API as defined in Section 2.1. reuse mechanisms from [mls-protocol], in particular [hpke]. 3.2.2. Format This extension uses the mls_extension_message WireFormat as defined in Section Section 2.1.7.1, where the content is a TargetedMessage. struct { opaque group_id; uint64 epoch; uint32 recipient_leaf_index; opaque authenticated_data; opaque encrypted_sender_auth_data; opaque hpke_ciphertext; } TargetedMessage; enum { hpke_auth_psk(0), signature_hpke_psk(1), } TargetedMessageAuthScheme; struct { uint32 sender_leaf_index; TargetedMessageAuthScheme authentication_scheme; select (authentication_scheme) { case HPKEAuthPsk: case SignatureHPKEPsk: opaque signature; } opaque kem_output; } TargetedMessageSenderAuthData; struct { opaque group_id; uint64 epoch; uint32 recipient_leaf_index; opaque authenticated_data; TargetedMessageSenderAuthData sender_auth_data; } TargetedMessageTBM; struct { opaque group_id; uint64 epoch; Robert Expires 25 April 2024 [Page 14] Internet-Draft MLS October 2023 uint32 recipient_leaf_index; opaque authenticated_data; uint32 sender_leaf_index; TargetedMessageAuthScheme authentication_scheme; opaque kem_output; opaque hpke_ciphertext; } TargetedMessageTBS; struct { opaque group_id; uint64 epoch; opaque label = "MLS 1.0 targeted message psk"; } PSKId; Note that TargetedMessageTBS is only used with the TargetedMessageAuthScheme.SignatureHPKEPsk authentication mode. 3.2.3. Encryption Targeted messages uses HPKE to encrypt the message content between two leaves. 3.2.3.1. Sender data encryption In addition, TargetedMessageSenderAuthData is encrypted in a similar way to MLSSenderData as described in section 6.3.2 in [mls-protocol]. The TargetedMessageSenderAuthData.sender_leaf_index field is the leaf index of the sender. The TargetedMessageSenderAuthData.authentication_scheme field is the authentication scheme used to authenticate the sender. The TargetedMessageSenderAuthData.signature field is the signature of the TargetedMessageTBS structure. The TargetedMessageSenderAuthData.kem_output field is the KEM output of the HPKE encryption. The key and nonce provided to the AEAD are computed as the KDF of the first KDF.Nh bytes of the hpke_ciphertext generated in the following section. If the length of the hpke_ciphertext is less than KDF.Nh, the whole hpke_ciphertext is used. In pseudocode, the key and nonce are derived as: Robert Expires 25 April 2024 [Page 15] Internet-Draft MLS October 2023 sender_auth_data_secret = DeriveExtensionSecret(extension_secret, "targeted message sender auth data") ciphertext_sample = hpke_ciphertext[0..KDF.Nh-1] sender_data_key = ExpandWithLabel(sender_auth_data_secret, "key", ciphertext_sample, AEAD.Nk) sender_data_nonce = ExpandWithLabel(sender_auth_data_secret, "nonce", ciphertext_sample, AEAD.Nn) The Additional Authenticated Data (AAD) for the SenderAuthData ciphertext is the first three fields of TargetedMessage: struct { opaque group_id; uint64 epoch; uint32 recipient_leaf_index; } SenderAuthDataAAD; 3.2.3.2. Padding The TargetedMessage structure does not include a padding field. It is the responsibility of the sender to add padding to the message as used in the next section. 3.2.4. Authentication For ciphersuites that support it, HPKE mode_auth_psk is used for authentication. For other ciphersuites, HPKE mode_psk is used along with a signature. The authentication scheme is indicated by the authentication_scheme field in TargetedMessageContent. See Section 3.2.5 for more information. For the PSK part of the authentication, clients export a dedicated secret: targeted_message_psk = DeriveExtensionSecret(extension_secret, "targeted message psk") The functions SealAuth and OpenAuth defined in [hpke] are used as described in Section 2.1.3 with an empty context. Other functions are defined in [mls-protocol]. 3.2.4.1. Authentication with HPKE The sender MUST set the authentication scheme to TargetedMessageAuthScheme.HPKEAuthPsk. Robert Expires 25 April 2024 [Page 16] Internet-Draft MLS October 2023 As described in Section 2.1.3 the hpke_context is a LabeledExtensionContent struct with the following content, where group_context is the serialized context of the group. label = "MLS 1.0 ExtensionData" extension_type = ExtensionType extension_data = group_context The sender then computes the following: (kem_output, hpke_ciphertext) = SealAuthPSK(receiver_node_public_key, hpke_context, targeted_message_tbm, message, targeted_message_psk, psk_id, sender_node_private_key) The recipient computes the following: message = OpenAuthPSK(kem_output, receiver_node_private_key, hpke_context, targeted_message_tbm, hpke_ciphertext, targeted_message_psk, psk_id, sender_node_public_key) 3.2.4.2. Authentication with signatures The sender MUST set the authentication scheme to TargetedMessageAuthScheme.SignatureHPKEPsk. The signature is done using the signature_key of the sender's LeafNode and the corresponding signature scheme used in the group. The sender then computes the following with hpke_context defined as in Section 3.2.4.1: (kem_output, hpke_ciphertext) = SealPSK(receiver_node_public_key, hpke_context, targeted_message_tbm, message, targeted_message_psk, epoch) The signature is computed as follows, where the extension_type is the type of this extension (see Section 4). Robert Expires 25 April 2024 [Page 17] Internet-Draft MLS October 2023 signature = SafeSignWithLabel(extension_type, ., "TargetedMessageTBS", targeted_message_tbs) The recipient computes the following: message = OpenPSK(kem_output, receiver_node_private_key, hpke_context, targeted_message_tbm, hpke_ciphertext, targeted_message_psk, epoch) The recipient MUST verify the message authentication: SafeVerifyWithLabel.verify(extension_type, sender_leaf_node.signature_key, "TargetedMessageTBS", targeted_message_tbs, signature) 3.2.5. Guidance on authentication schemes If the group’s ciphersuite does not support HPKE mode_auth_psk, implementations MUST choose TargetedMessageAuthScheme.SignatureHPKEPsk. If the group’s ciphersuite does support HPKE mode_auth_psk, implementations CAN choose TargetedMessageAuthScheme.HPKEAuthPsk if better efficiency and/or repudiability is desired. Implementations SHOULD consult [hpke-security-considerations] beforehand. 3.3. Content Advertisement 3.3.1. Description This section describes two extensions to MLS. The first allows MLS clients to advertise their support for specific formats inside MLS application_data. These are expressed using the extensive IANA Media Types registry (formerly called MIME Types). The accepted_media_types LeafNode extension lists the formats a client supports inside application_data. The second, the required_media_types GroupContext extension specifies which media types need to be supported by all members of a particular MLS group. These allow clients to confirm that all members of a group can communicate. Note that when the membership of a group changes, or when the policy of the group changes, it is responsibility of the committer to insure that the membership and policies are compatible. Robert Expires 25 April 2024 [Page 18] Internet-Draft MLS October 2023 Finally, this document defines a minimal framing format so MLS clients can signal which media type is being sent when multiple formats are permitted in the same group. As clients are upgraded to support new formats they can use these extensions to detect when all members support a new or more efficient encoding, or select the relevant format or formats to send. Note that the usage of IANA media types in general does not imply the usage of MIME Headers [RFC2045] for framing. Vendor-specific media subtypes starting with vnd. can be registered with IANA without standards action as described in [RFC6838]. Implementations which wish to send multiple formats in a single application message, may be interested in the multipart/alternative media type defined in [RFC2046] or may use or define another type with similar semantics (for example using TLS Presentation Language syntax [RFC8446]). 3.3.2. Syntax MediaType is a TLS encoding of a single IANA media type (including top-level type and subtype) and any of its parameters. Even if the parameter_value would have required formatting as a quoted-string in a text encoding, only the contents inside the quoted-string are included in parameter_value. MediaTypeList is an ordered list of MediaType objects. struct { opaque parameter_name; /* Note: parameter_value never includes the quotation marks of an * RFC 2045 quoted-string */ opaque parameter_value; } Parameter; struct { /* media_type is an IANA top-level media type, a "/" character, * and the IANA media subtype */ opaque media_type; /* a list of zero or more parameters defined for the subtype */ Parameter parameters; } MediaType; struct { MediaType media_types; } MediaTypeList; MediaTypeList accepted_media_types; MediaTypeList required_media_types; Robert Expires 25 April 2024 [Page 19] Internet-Draft MLS October 2023 Example IANA media types with optional parameters: image/png text/plain ;charset="UTF-8" application/json application/vnd.example.msgbus+cbor For the example media type for text/plain, the media_type field would be text/plain, parameters would contain a single Parameter with a parameter_name of charset and a parameter_value of UTF-8. 3.3.3. Expected Behavior An MLS client which implements this section SHOULD include the accepted_media_types extension in its LeafNodes, listing all the media types it can receive. As usual, the client also includes accepted_media_types in its capabilities field in its LeafNodes (including LeafNodes inside its KeyPackages). When creating a new MLS group for an application using this specification, the group MAY include a required_media_type extension in the GroupContext Extensions. As usual, the client also includes required_media_types in its capabilities field in its LeafNodes (including LeafNodes inside its KeyPackages). When used in a group, the client MUST include the required_media_types and accepted_media_types extensions in the list of extensions in RequiredCapabilities. MLS clients SHOULD NOT add an MLS client to an MLS group with required_media_types unless the MLS client advertises it can support all of the required MediaTypes. As an exception, a client could be preconfigured to know that certain clients support the requried types. Likewise, an MLS client is already forbidden from issuing or committing a GroupContextExtensions Proposal which introduces required extensions which are not supported by all members in the resulting epoch. 3.3.4. Framing of application_data When an MLS group contains the required_media_types GroupContext extension, the application_data sent in that group is interpreted as ApplicationFraming as defined below: struct { MediaType media_type; opaque application_content; } ApplicationFraming; Robert Expires 25 April 2024 [Page 20] Internet-Draft MLS October 2023 The media_type MAY be zero length, in which case, the media type of the application_content is interpreted as the first MediaType specified in required_media_types. 3.4. SelfRemove Proposal The design of the MLS protocol prevents a member of an MLS group from removing itself immediately from the group. (To cause an immediate change in the group, a member must send a Commit message. However the sender of a Commit message knows the keying material of the new epoch and therefore needs to be part of the group.) Instead a member wishing to remove itself can send a Remove Proposal and wait for another member to Commit its Proposal. Unfortunately, MLS clients that join via an External Commit ignore pending, but otherwise valid, Remove Proposals. The member trying to remove itself has to monitor the group and send a new Remove Proposal in every new epoch until the member is removed. In a group with a burst of external joiners, a member connected over a high-latency link (or one that is merely unlucky) might have to wait several epochs to remove itself. A real-world situation in which this happens is a member trying to remove itself from a conference call as several dozen new participants are trying to join (often on the hour). This section describes a new SelfRemove Proposal extension type. It is designed to be included in External Commits. 3.4.1. Extension Description This document specifies a new MLS Proposal type called SelfRemove. Its syntax is described using the TLS Presentation Language [@!RFC8446] below (its content is an empty struct). It is allowed in External Commits and requires an UpdatePath. SelfRemove proposals are only allowed in a Commit by reference. SelfRemove cannot be sent as an external proposal. Robert Expires 25 April 2024 [Page 21] Internet-Draft MLS October 2023 struct {} SelfRemove; struct { ProposalType msg_type; select (Proposal.msg_type) { case add: Add; case update: Update; case remove: Remove; case psk: PreSharedKey; case reinit: ReInit; case external_init: ExternalInit; case group_context_extensions: GroupContextExtensions; case self_remove: SelfRemove; }; } Proposal; The description of behavior below only applies if all the members of a group support this extension in their capabilities; such a group is a "self-remove-capable group". An MLS client which supports this extension can send a SelfRemove Proposal whenever it would like to remove itself from a self-remove- capable group. Because the point of a SelfRemove Proposal is to be available to external joiners (which are not yet members), these proposals MUST be sent in an MLS PublicMessage. Whenever a member receives a SelfRemove Proposal, it includes it along with any other pending Propsals when sending a Commit. It already MUST send a Commit of pending Proposals before sending new application messages. When a member receives a Commit referencing one or more SelfRemove Proposals, it treats the proposal like a Remove Proposal, except the leaf node to remove is determined by looking in the Sender leaf_index of the original Proposal. The member is able to verify that the Sender was a member. Whenever a new joiner is about to join a self-remove-capable group with an External Commit, the new joiner MUST fetch any pending SelfRemove Proposals along with the GroupInfo object, and include the SelfRemove Proposals in its External Commit by reference. (An ExternalCommit can contain zero or more SelfRemove proposals). The new joiner MUST validate the SelfRemove Proposal before including it by reference, except that it skips the validation of the membership_tag because a non-member cannot verify membership. Robert Expires 25 April 2024 [Page 22] Internet-Draft MLS October 2023 During validation, SelfRemove proposals are processed after Update proposals and before Remove proposals. If there is a pending SelfRemove proposal for a specific leaf node and a pending Remove proposal for the same leaf node, the Remove proposal is invalid. A client MUST NOT issue more than one SelfRemove proposal per epoch. The MLS Delivery Service (DS) needs to validate SelfRemove Proposals it receives (except that it cannot validate the membership_tag). If the DS provides a GroupInfo object to an external joiner, the DS SHOULD attach any SelfRemove proposals known to the DS to the GroupInfo object. As with Remove proposals, clients need to be able to receive a Commit message which removes them from the group via a SelfRemove. If the DS does not forward a Commit to a removed client, it needs to inform the removed client out-of-band. 3.5. Last resort KeyPackages Type: KeyPackage extension 3.5.1. Description Section 10 of [RFC9420] details that clients are required to pre- publish KeyPackages s.t. other clients can add them to groups asynchronously. It also states that they should not be re-used: KeyPackages are intended to be used only once and SHOULD NOT be reused except in the case of a "last resort" KeyPackage (see Section 16.8). Clients MAY generate and publish multiple KeyPackages to support multiple cipher suites. Section 16.8 of [RFC9420] then introduces the notion of last-resort KeyPackages as follows: An application MAY allow for reuse of a "last resort" KeyPackage in order to prevent denial-of-service attacks. However, [RFC9420] does not specify how to distinguish regular KeyPackages from last-resort ones. The last_resort_key_package KeyPackage extension defined in this section fills this gap and allows clients to specifically mark KeyPackages as KeyPackages of last resort that MAY be used more than once in scenarios where all other KeyPackages have already been used. The extension allows clients that pre-publish KeyPackages to signal to the Delivery Service which KeyPackage(s) are meant to be used as last resort KeyPackages. Robert Expires 25 April 2024 [Page 23] Internet-Draft MLS October 2023 An additional benefit of using an extension rather than communicating the information out-of-band is that the extension is still present in Add proposals. Clients processing such Add proposals can authenticate that a KeyPackage is a last-resort KeyPackage and MAY make policy decisions based on that information. 3.5.2. Format The purpose of the extension is simply to mark a given KeyPackage, which means it carries no additional data. As a result, a LastResort Extension contains the ExtensionType with an empty extension_data field. 4. IANA Considerations This document requests the addition of various new values under the heading of "Messaging Layer Security". Each registration is organized under the relevant registry Type. RFC EDITOR: Please replace XXXX throughout with the RFC number assigned to this document 4.1. MLS Wire Formats 4.1.1. MLS Extension Message * Value: 0x0006 * Name: mls_extension_message * Recommended: Y * Reference: RFC XXXX 4.2. MLS Extension Types 4.2.1. targeted_messages_capability MLS Extension The targeted_messages_capability MLS Extension Type is used in the capabilities field of LeafNodes to indicate the support for the Targeted Messages Extension. The extension does not carry any payload. * Value: 0x0006 * Name: targeted_messages_capability Robert Expires 25 April 2024 [Page 24] Internet-Draft MLS October 2023 * Message(s): LN: This extension may appear in LeafNode objects * Recommended: Y * Reference: RFC XXXX 4.2.2. targeted_messages MLS Extension The targeted_messages MLS Extension Type is used inside GroupContext objects. It indicates that the group supports the Targeted Messages Extension. * Value: 0x0007 * Name: targeted_messages * Message(s): GC: This extension may appear in GroupContext objects * Recommended: Y * Reference: RFC XXXX 4.2.3. accepted_media_types MLS Extension The accepted_media_types MLS Extension Type is used inside LeafNode objects. It contains a MediaTypeList representing all the media types supported by the MLS client referred to by the LeafNode. * Value: 0x0008 * Name: accepted_media_types * Message(s): LN: This extension may appear in LeafNode objects * Recommended: Y * Reference: RFC XXXX 4.2.4. required_media_types MLS Extension The required_media_types MLS Extension Type is used inside GroupContext objects. It contains a MediaTypeList representing the media types which are mandatory for all MLS members of the group to support. * Value: 0x0009 * Name: required_media_types Robert Expires 25 April 2024 [Page 25] Internet-Draft MLS October 2023 * Message(s): GC: This extension may appear in GroupContext objects * Recommended: Y * Reference: RFC XXXX 4.2.5. last_resort_key_package MLS Extension The last_resort_key_package MLS Extension Type is used inside KeyPackage objects. It marks the KeyPackage for usage in last resort scenarios and contains no additional data. * Value: 0x0009 * Name: last_resort_key_package * Message(s): KP: This extension may appear in KeyPackage objects * Recommended: Y * Reference: RFC XXXX 4.3. MLS Proposal Types 4.3.1. Extension Proposal * Value: 0x0008 * Name: extension_proposal * Recommended: Y * Path Required: N * External Sender: N * Reference: RFC XXXX 4.3.2. Extension Path Proposal * Value: 0x0009 * Name: extension_path_proposal * Recommended: Y * Path Required: Y Robert Expires 25 April 2024 [Page 26] Internet-Draft MLS October 2023 * External Sender: N * Reference: RFC XXXX 4.3.3. Extension External Proposal * Value: 0x000a * Name: extension_external_proposal * Recommended: Y * Path Required: N * External Sender: Y * Reference: RFC XXXX 4.3.4. AppAck Proposal * Value: 0x000b * Name: app_ack * Recommended: Y * Path Required: Y * Reference: RFC XXXX 4.3.5. SelfRemove Proposal The self_remove MLS Proposal Type is used for a member to remove itself from a group more efficiently than using a remove proposal type, as the self_remove type is permitted in External Commits. * Value: 0x000c * Name: self_remove * Recommended: Y * External: N * Path Required: Y 4.4. MLS Credential Types Robert Expires 25 April 2024 [Page 27] Internet-Draft MLS October 2023 4.4.1. Extension Credential * Value: 0x0000 * Name: extension_credential * Recommended: Y * Reference: RFC XXXX 4.5. MLS Signature Labels 4.5.1. Labeled Extension Content * Label: "LabeledExtensionContent" * Recommended: Y * Reference: RFC XXXX 5. Security considerations 5.1. AppAck TBC 5.2. Targeted Messages In addition to the sender authentication, Targeted Messages are authenticated by using a preshared key (PSK) between the sender and the recipient. The PSK is exported from the group key schedule using the label "targeted message psk". This ensures that the PSK is only valid for a specific group and epoch, and the Forward Secrecy and Post-Compromise Security guarantees of the group key schedule apply to the targeted messages as well. The PSK also ensures that an attacker needs access to the private group state in addition to the HPKE/signature's private keys. This improves confidentiality guarantees against passive attackers and authentication guarantees against active attackers. 5.3. Content Advertisement Use of the accepted_media_types and rejected_media_types extensions could leak some private information visible in KeyPackages and inside an MLS group. They could be used to infer a specific implementation, platform, or even version. Clients should consider carefully the privacy implications in their environment of making a list of acceptable media types available. Robert Expires 25 April 2024 [Page 28] Internet-Draft MLS October 2023 5.4. SelfRemove An external recipient of a SelfRemove Proposal cannot verify the membership_tag. However, an external joiner also has no way to completely validate a GroupInfo object that it receives. An insider can prevent an External Join by providing either an invalid GroupInfo object or an invalid SelfRemove Proposal. The security properties of external joins does not change with the addition of this proposal type. 6. References 6.1. Normative References [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . [RFC9180] Barnes, R., Bhargavan, K., Lipp, B., and C. Wood, "Hybrid Public Key Encryption", RFC 9180, DOI 10.17487/RFC9180, February 2022, . [RFC9420] Barnes, R., Beurdouche, B., Robert, R., Millican, J., Omara, E., and K. Cohn-Gordon, "The Messaging Layer Security (MLS) Protocol", RFC 9420, DOI 10.17487/RFC9420, July 2023, . 6.2. Informative References [hpke] "Hybrid Public Key Encryption", n.d., . [hpke-security-considerations] "HPKE Security Considerations", n.d., . [mls-protocol] "The Messaging Layer Security (MLS) Protocol", n.d., . Robert Expires 25 April 2024 [Page 29] Internet-Draft MLS October 2023 [RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996, . [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, . [RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, DOI 10.17487/RFC6838, January 2013, . Contributors Joel Alwen Amazon Email: alwenjo@amazon.com Konrad Kohbrok Phoenix R&D Email: konrad.kohbrok@datashrine.de Rohan Mahy Wire Email: rohan@wire.com Marta Mularczyk Amazon Email: mulmarta@amazon.com Author's Address Raphael Robert Phoenix R&D Email: ietf@raphaelrobert.com Robert Expires 25 April 2024 [Page 30]