Internet DRAFT - draft-ietf-tictoc-ptp-mib

draft-ietf-tictoc-ptp-mib



TICTOC Working Group                                Vinay Shankarkumar
INTERNET DRAFT                                         Laurent Montini
Intended status: Standards Track                         Cisco Systems

                                                            Tim Frost
                                                 Calnex Solutions Ltd.

                                                           Greg Dowd
                                                            Microsemi

Expires: September 17, 2017                             March 17, 2017




                 Precision Time Protocol Version 2 (PTPv2)
                        Management Information Base
                     draft-ietf-tictoc-ptp-mib-12.txt


Status of this Memo

   This Internet-Draft is submitted to IETF in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

   This Internet-Draft will expire on March 17, 2017.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents


Shankarkumar et al.  Expires September 17, 2017               [Page 1]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document. Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in TCP/IP-based internets.
   In particular, it defines objects for managing networks using
   Precision Time Protocol (PTP), specified in IEEE Std. 1588(TM)-2008.

   This memo specifies a MIB module in a manner that is both compliant
   to the SMIv2, and semantically identical to the peer SMIv1
   definitions.

Table of Contents

   1. Introduction ................................................. 2
      1.1. Relationship to other Profiles and MIBs ................. 3
      1.2. Change Log .............................................. 3
   2. The SNMP Management Framework ................................ 5
   3. Overview ..................................................... 6
   4. IETF PTP MIB Definition ...................................... 6
   5. Security Considerations ..................................... 58
   6. IANA Considerations ......................................... 61
   7. References .................................................. 61
      7.1. Normative References ................................... 61
      7.2. Informative References ................................. 61
   8. Acknowledgements ............................................ 63
   9. Author's Addresses .......................................... 63


1. Introduction

   This memo defines a portion of the Management Information Base (MIB)
   module for use with network management protocols in the Internet
   Community. In particular, it describes managed objects used for
   managing PTP devices including the ordinary clock, transparent clock,
   boundary clocks.

   This MIB module is restricted to reading standard PTP data elements,
   as described in [IEEE 1588-2008].  This enables it to monitor the
   operation of PTP clocks within the network.  It is envisioned this
   MIB module will complement other managed objects to be defined that
   will provide more detailed information on the performance of PTP


Shankarkumar et al.   Expires February 24, 2017               [Page 2]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   clocks supporting the Telecom Profile defined in [G.8265.1], and any
   future profiles that may be defined.  Those objects are considered
   out of scope for the current draft.

   Similarly, this MIB module is read-only and not intended to provide
   the ability to configure PTP clocks.  Since PTP clocks are often
   embedded in other network elements such as routers, switches and
   gateways, this ability is generally provided via the configuration
   interface for the network element.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC 2119].

1.1. Relationship to other Profiles and MIBs

   This MIB module is intended to be used with the default PTP profile
   described in [IEEE 1588-2008] when running over the IP network layer.
   As stated above, it is envisioned this MIB module will complement
   other managed objects to be defined to monitor and measure the
   performance of PTP clocks supporting specific PTP profiles, e.g. the
   Telecom Profile defined in [G.8265.1].

   Some other PTP profiles have their own MIB modules defined as part of
   the profile, and this MIB module is not intended to replace those MIB
   modules.

1.2. Change Log

   This section tracks changes made to the revisions of the Internet
   Drafts of this document.  It will be *deleted* when the document is
   published as an RFC.

   draft-vinay-tictoc-ptp-mib

   -00  Mar 11  Initial version; showed structure of MIB

   draft-ietf-tictoc-ptp-mib

   -00  Jul 11  First full, syntactically correct and compileable MIB

   -01  Jan 12  Revised following comments from Bert Wijnen:
                - revised introduction to clarify the scope, and the
                  relationship to other MIBs and profiles
                - changed name to "ptpbase"
                - corrected some data types
                - corrected references and typos

   -02  Jul 12  Revised following comment at IETF83:


Shankarkumar et al.   Expires February 24, 2017               [Page 3]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


                - changed "ptpbaseClockPortRunningIPversion" to the more
                  generic "ptpbaseClockPortRunningTransport", covering
                  all transport types defined in [IEEE 1588-2008]
                  (i.e. IPv4, IPv6, Ethernet, DeviceNet and ControlNet).
                - changed addresses associated with transports from
                  "InetAddress" (for the IP transport) to a string,
                  to allow for the different transport types.

   -03  Jul 12 Minor changes following comments from Andy Bierman:
                - corrected some compilation errors
                - moved OBJECT-GROUP and MODULE-COMPLIANCE macros to the
                  end

   -04  Jan 13 Changes:
                - Use of 'AutonomousType' import
                - Display hint being specified for ClockIdentity,
                  ClockInterval, ClockPortTransportTypeAddress
                  Textual Conventions
                - Removal of the Textual convention
                  ClockPortTransportType, replaced with the
                  wellKnownTransportTypes
                - Modified ptpbaseClockPortCurrentPeerAddressType,
                  ptpbaseClockPortRunningTransport,
                  ptpbaseClockPortAssociateAddressType, to use
                  AutonomousType.
                - various textual changes to descriptive text in
                  response to comments

   -05  Feb 13 Several changes in response to comments from Alun Luchuk
                and Kevin Gross:
                - Modified the use of wellKnownTransportTypes and
                  wellKnownEncapsulationTypes
                - changed ptpbaseClockPortSyncOneStep to
                  ptpbaseClockPortSyncTwoStep to match [IEEE 1588-2008]
                  semantics
                - Re-ordered textual conventions to be alphabetic
                - Changed some types from Integer32 to use defined
                  textual conventions
                - various minor descriptive text changes

   -06  Mar 14 Updated author information, and fixed typos

   -07  Mar 15 Updated author information, and fixed typo/enum

   -08  Feb 16 Updated MIB in response to Brian Haberman's comments:
                - Fixed MIB date
                - Fixed references to [IEEE 1588-2008]
                - Changed "router" for "node"



Shankarkumar et al.   Expires February 24, 2017               [Page 4]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   -09  Apr 16 Updated following Dan Romascanu's MIB Doctor comments

   -10  Aug 16 Update following further feedback from Dan Romascanu.
                Also updated security section to list out all objects
                with MAX-ACCESS other than non-accessible, in response
                to comments from Deborah Brungard and Alissa Cooper.

   -11  Aug 16 Used corrected version of MIB text
                - Reduced the DESCIPTION section and moved to section 3
                - Added clarification that PtpClockIdentity can also be
                  non-EUI-64 address
                - Clarifications on PtpClockPortTransportTypeAddress,
                  and mentioned counters being discontinuous
                - Made PtpClockQualityClassType as enumeration
                Updated overview section with a longer description.

   -12  Mar 17 Replaced direct quotations of [IEEE 1588-2008] with
                references to avoid copyright issues.

2. The SNMP Management Framework

   The SNMP Management Framework presently consists of five major
   components:

   o An overall architecture, described in STD62, [RFC 3411].

   o Mechanisms for describing and naming objects and events for the
      purpose of management.  The first version of this Structure of
      Management Information (SMI) is called SMIv1 and described in
      STD 16: [RFC 1155], [RFC 1212] and [RFC 1215].
      The second version, called SMIv2, is described in STD 58:
      [RFC 2578], [RFC 2579] and [RFC 2580].

   o Message protocols for transferring management information.  The
      first version of the SNMP message protocol is called SNMPv1 and
      described in STD 15 [RFC 1157].  A second version of the SNMP
      message protocol, which is not an Internet standards track
      protocol, is called SNMPv2c and described in [RFC 1901] and
      [RFC 1906].  The third version of the message protocol is called
      SNMPv3 and described in STD62: [RFC 3417], [RFC 3412] and [RFC
      3414].

   o Protocol operations for accessing management information.  The
      first set of protocol operations and associated PDU formats is
      described in STD 15 [RFC 1157].  A second set of protocol
      operations and associated PDU formats is described in STD 62
      [RFC 3416].

   o A set of fundamental applications described in STD 62 [RFC 3413]


Shankarkumar et al.   Expires February 24, 2017               [Page 5]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


      and the view-based access control mechanism described in STD 62
      [RFC 3415].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  Objects in the MIB are
   defined using the mechanisms defined in the SMI.

   This memo specifies a MIB module that is compliant to the SMIv2.  A
   MIB module conforming to the SMIv1 can be produced through the
   appropriate translations.  The resulting translated MIB must be
   semantically equivalent, except where objects or events are omitted
   because no translation is possible (e.g., use of Counter64).  Some
   machine readable information in SMIv2 will be converted into textual
   descriptions in SMIv1 during the translation process.  However, this
   loss of machine readable information is not considered to change the
   semantics of the MIB module.

3. Overview

   The objects defined in this MIB module are to be used when describing
   the Precision Time Protocol (PTP), as defined in [IEEE 1588-2008].

   Section 6 of [IEEE 1588-2008] provides an overview of synchronization
   networks using PTP.

   Terms used in this document have meanings as defined in section 3.1
   of [IEEE 1588-2008].

4. IETF PTP MIB Definition

PTPBASE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    OBJECT-IDENTITY,
    Gauge32,
    Unsigned32,
    Counter32,
    Counter64,
    mib-2,
    Integer32
        FROM SNMPv2-SMI
    OBJECT-GROUP,
    MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    TruthValue,
    DisplayString,


Shankarkumar et al.   Expires February 24, 2017               [Page 6]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    AutonomousType
        FROM SNMPv2-TC
    InterfaceIndexOrZero
        FROM IF-MIB;


ptpbaseMIB MODULE-IDENTITY
    LAST-UPDATED    "201703120000Z"
    ORGANIZATION    "TICTOC Working Group"
    CONTACT-INFO
          "WG Email: tictoc@ietf.org

           Vinay Shankarkumar
           Cisco Systems,
           Email: vinays@cisco.com

           Laurent Montini,
           Cisco Systems,
           Email: lmontini@cisco.com

           Tim Frost,
           Calnex Solutions Ltd.,
           Email: tim.frost@calnexsol.com

           Greg Dowd,
           Microsemi Inc.,
           Email: greg.dowd@microsemi.com"

    DESCRIPTION
        "The MIB module for PTP version 2 (IEEE Std. 1588(TM)-2008)

        Overview of PTP version 2 (IEEE Std. 1588(TM)-2008)

        [IEEE 1588-2008] defines a protocol enabling precise
        synchronization of clocks in measurement and control systems
        implemented with packet-based networks, the Precision Time
        Protocol Version 2 (PTPv2).  This MIB module does not address
        the earlier version IEEE Std. 1588(TM)-2002 (PTPv1).  The
        protocol is applicable to network elements communicating using
        IP.  The protocol enables heterogeneous systems that include
        clocks of various inherent precision, resolution, and stability
        to synchronize to a grandmaster clock.

        The protocol supports system-wide synchronization accuracy in
        the sub-microsecond range with minimal network and local clock
        computing resources. [IEEE 1588-2008] uses UDP/IP or
        Ethernet and can be adapted to other mappings. It includes
        formal mechanisms for message extensions, higher sampling rates,
        correction for asymmetry, a clock type to reduce error


Shankarkumar et al.   Expires February 24, 2017               [Page 7]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        accumulation in large topologies, and specifications on how to
        incorporate the resulting additional data into the
        synchronization protocol. The [IEEE 1588-2008] defines
        conformance and management capability also.

        MIB description

        This MIB module supports the Precision Time Protocol version 2
        (PTPv2, hereafter designated as PTP) features of network element
        system devices, when using the default PTP profile described in
        [IEEE 1588-2008] when running over the IP network layer.

        It is envisioned this MIB module will complement other managed
        objects to be defined to monitor and measure the performance of
        the PTP devices and telecom clocks supporting specific PTP
        profiles.

        Some other PTP profiles have their own MIB modules defined as
        part of the profile, and this MIB module is not intended to
        replace those MIB modules.

        Technical terms used in this module are defined in [IEEE 1588-
2008].

        The MIB module refers to the sections of [IEEE 1588-2008].

        Acronyms:
            ARB     Arbitrary Timescale
            E2E     End-to-End
            EUI     Extended Unique Identifier
            GPS     Global Positioning System
            IANA    Internet Assigned Numbers Authority
            IP      Internet Protocol
            MAC     Media Access Control
                    according to [IEEE 802.3-2008]
            MAC-48  Used to identify hardware instances within 802-based
                    networking applications. This is obsolete now.
            NIST    National Institute of Standards and Technology
            NTP     Network Time Protocol (see IETF [RFC 5905])
            OUI     Organizational Unique Identifier
                    (allocated by the IEEE)
            P2P     Peer-to-Peer
            PTP     Precision Time Protocol
            TAI     International Atomic Time
            TC      Transparent Clock
            UDP     User Datagram Protocol
            UTC     Coordinated Universal Time

        References:


Shankarkumar et al.   Expires February 24, 2017               [Page 8]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        [IEEE 1588-2008] IEEE Standard for A Precision Clock
            Synchronization Protocol for Networked Measurement and
            Control Systems, IEEE Std. 1588(TM)-2008, 24 July 2008.


        The below table specifies the object formats of the various
        textual conventions used.

        Data type mapping   Textual Convention    SYNTAX
        ------------------- --------------------- ------------------
        5.3.2 TimeInterval  PtpClockTimeInterval  OCTET
STRING(SIZE(1..255))
        5.3.3 Timestamp     PtpClockTimestamp     OCTET STRING(SIZE(6))
        5.3.4 ClockIdentity PtpClockIdentity      OCTET STRING(SIZE(8))
        5.3.5 PortIdentity  PtpClockPortNumber    INTEGER(1..65535)
        5.3.7 ClockQuality  PtpClockQualityClassType
      "

      -- revision log
      REVISION        "201703120000Z"
      DESCRIPTION     "Draft 12, for IESG approval remvoed the IEEE
standard texts."

      REVISION        "201608240000Z"
      DESCRIPTION     "Draft 11, for IESG approval after all comments,
including the correct MIB."

      REVISION        "201608220000Z"
      DESCRIPTION     "Draft 10, for IESG approval after all comments
addressed."

      REVISION        "201604200000Z"
      DESCRIPTION     "Draft 9, for IESG approval."

      REVISION        "201602220000Z"
      DESCRIPTION     "Draft 8, for IETF last call."

      ::= { mib-2 XXX } -- XXX to be assigned by IANA


-- Textual Conventions

PtpClockDomainType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "d"
    STATUS          current
    DESCRIPTION
        "The Domain is identified by an integer, the domainNumber, in
        the range of 0 to 255. An integer value that is used to assign
        each PTP device to a particular domain."


Shankarkumar et al.   Expires February 24, 2017               [Page 9]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



    REFERENCE   "Section 7.1 Domains, Table 2 of [IEEE 1588-2008]"
    SYNTAX      Unsigned32 (0..255)

PtpClockIdentity ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "255a"
    STATUS          current
    DESCRIPTION
        "The clock Identity is an 8-octet array and will be presented in
        the form of a character array.  Network byte order is assumed.

        The value of the PtpClockIdentity should be taken from the
        IEEE EUI-64 individual assigned numbers as indicated in
        Section 7.5.2.2.2 of [IEEE 1588-2008]. It can also be non-EUI-64
        address as defined in section 7.5.2.2.3 of [IEEE 1588-2008].

        The clock identifier can be constructed from existing EUI-48
        assignments and here is an abbreviated example extracted from
        section 7.5.2.2.2 [IEEE 1588-2008]."

    REFERENCE       "Section 7.5.2.2.1 of [IEEE 1588-2008]"
    SYNTAX          OCTET STRING (SIZE (8))

PtpClockInstanceType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "d"
    STATUS          current
    DESCRIPTION
        "The instance of the Clock of a given clock type in a given
        domain."
    SYNTAX          Unsigned32 (0..255)

PtpClockIntervalBase2 ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "d"
    STATUS          current
    DESCRIPTION
        "The interval included in message types Announce, Sync,
        Delay_Req, and Pdelay_Req as indicated in section 7.7.2.1 of
        [IEEE 1588-2008]."

    REFERENCE   "Section 7.7.2.1 General interval specification of
                [IEEE 1588-2008]"
    SYNTAX      Integer32 (-128..127)

PtpClockMechanismType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The clock type based on whether end-to-end or peer-to-peer
        mechanisms are used. The mechanism used to calculate the Mean
        Path Delay as indicated in Table 9 of [IEEE 1588-2008]."


Shankarkumar et al.   Expires February 24, 2017              [Page 10]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



    REFERENCE
        "Sections 8.2.5.4.4 portDS.delayMechanism,
        6.6.4  Measuring link propagation delay in clocks supporting
        peer-to-peer path correction,
        7.4.2 communication Path asymmetry of [IEEE 1588-2008]."
    SYNTAX      INTEGER {
                    e2e(1),
                    p2p(2),
                    disabled(254)
                    }

PtpClockPortNumber ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "d"
    STATUS          current
    DESCRIPTION
        "An index identifying a specific Precision Time Protocol (PTP)
        port on a PTP node."

    REFERENCE
        "Sections 7.5.2.3 portNumber and 5.3.5 PortIdentity of
        [IEEE 1588-2008]"
    SYNTAX      Unsigned32 (0..65535)

PtpClockPortState ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "This is the value of the current state of the protocol engine
        associated with this port."

    REFERENCE
        "Section 8.2.5.3.1 portState and 9.2.5 State machines of
        [IEEE 1588-2008]"
    SYNTAX          INTEGER  {
                        initializing(1),
                        faulty(2),
                        disabled(3),
                        listening(4),
                        preMaster(5),
                        master(6),
                        passive(7),
                        uncalibrated(8),
                        slave(9)
                    }

PtpClockPortTransportTypeAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "255a"
    STATUS          current
    DESCRIPTION


Shankarkumar et al.   Expires February 24, 2017              [Page 11]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        "The Clock port transport protocol address used for this
         communication between the clock nodes. This is a string
         corresponding to the address type as specified by the
         transport type used. The transport types can be defined
         elsewhere, in addition to the ones defined in this document.
         This can be an address of type IP version 4, IP version 6,
         Ethernet, DeviceNET, ControlNET or IEC61158. The OCTET STRING
         representation of the OID of ptpbaseWellKnownTransportTypes
         will be used in the values contained in the OCTET STRING."

    REFERENCE   "Annex D (IPv4), Annex E (IPv6), Annex F (Ethernet),
                 Annex G (DeviceNET), Annex H (ControlNET) and
                 Annex I (IEC61158) of [IEEE 1588-2008]"
    SYNTAX          OCTET STRING (SIZE (1..255))

PtpClockProfileType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Clock Profile used. A profile is the set of allowed Precision
        Time Protocol (PTP) features applicable to a device."

    REFERENCE       "Section 3.1.30 profile and 19.3 PTP profiles of
                     [IEEE 1588-2008]"
    SYNTAX          INTEGER  {
                        default(1),
                        telecom(2),
                        vendorspecific(3)
                    }

PtpClockQualityAccuracyType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The ClockQuality as specified in sections 5.3.7, 7.6.2.5 and
        Table 6 of [IEEE 1588-2008].

        The following values are not represented in the enumerated
        values.

                 0x01-0x1F Reserved
                 0x32-0x7F Reserved

        It is important to note that section 7.1.1 of [RFC 2578] allows
        for gaps and enumerate values starting at zero when indicated by
        the protocol."

    REFERENCE
        "Section 5.3.7 ClockQuality, 7.6.2.5 clockAccuracy and Table 6
        clockAccuracy enumeration of [IEEE 1588-2008]"
    SYNTAX          INTEGER  {


Shankarkumar et al.   Expires February 24, 2017              [Page 12]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


                     -- reserved00(0:31), 0x00 to 0x1F
                        nanoSecond25(32),    -- 0x20
                        nanoSecond100(33),   -- 0x21
                        nanoSecond250(34),   -- 0x22
                        microSec1(35),       -- 0x23
                        microSec2dot5(36),   -- 0x24
                        microSec10(37),      -- 0x25
                        microSec25(38),      -- 0x26
                        microSec100(39),     -- 0x27
                        microSec250(40),     -- 0x28
                        milliSec1(41),       -- 0x29
                        milliSec2dot5(42),   -- 0x2A
                        milliSec10(43),      -- 0x2B
                        milliSec25(44),      -- 0x2C
                        milliSec100(45),     -- 0x2D
                        milliSec250(46),     -- 0x2E
                        second1(47),         -- 0x2F
                        second10(48),        -- 0x30
                        secondGreater10(49), -- 0x31
                        unknown(254)         -- 0xFE
                     -- reserved255(255),    0xFF
                    }

PtpClockQualityClassType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The ClockQuality as specified in section 5.3.7 ClockQuality,
        7.6.2.4 clockClass and Table 5 clockClass specifications of
        [IEEE 1588-2008]."

    REFERENCE       "Section 5.3.7, 7.6.2.4 and Table 5 of
                     [IEEE 1588-2008]."
    SYNTAX          INTEGER  {
                     -- reserved(0), 0x00
                     -- reserved(1:5), 0x01 to 0x05
                        clockclass6(6), -- 0x06
                        clockclass7(7), -- 0x07
                        -- reserved(8), 0x08
                        -- reserved(9:10), 0x09 to 0x0A
                        -- reserved(11:12), 0x0B, 0x0C
                        clockclass13(13), -- 0x0D
                        clockclass14(14), -- 0x0E
                        -- reserved(15:51), 0x0F to 0x33
                        clockclass52(52), -- 0x34
                        -- reserved(53:57), 0x35 to 0x39
                        clockclass58(58) -- 0x3A
                        -- reserved(59:67), 0x3B to 0x43
                        -- otherprofiles(68:122), 0x44 to 0x7A
                        -- reserved(123:127), 0x7B to 0x7F


Shankarkumar et al.   Expires February 24, 2017              [Page 13]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


                        -- reserved(128:132), 0x80 to 0x84
                    }

PtpClockRoleType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The Clock Role. The protocol generates a Master Slave
        relationship among the clocks in the system.

        Clock Role      Value
        -------------------------
        Master clock     1
        Slave clock      2      "
    SYNTAX          INTEGER  {
                        master(1),
                        slave(2)
                    }

PtpClockStateType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The clock state returned by a PTP engine.

        Clock State      Value
        ------------------------
        Freerun state       1
        Holdover state      2
        Acquiring state     3
        Freq_locked state   4
        Phase_aligned state 5  "
    SYNTAX          INTEGER  {
                        freerun(1),
                        holdover(2),
                        acquiring(3),
                        frequencyLocked(4),
                        phaseAligned(5)
                    }

PtpClockTimeInterval ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "255a"
    STATUS          current
    DESCRIPTION
        "This textual convention corresponds to the TimeInterval
        structure indicated in section 5.3.2 of [IEEE 1588-2008].
        It will be presented in the form of a character array.
        Network byte order is assumed."

    REFERENCE
        "Section 5.3.2 TimeInterval and section 7.7.2.1 Timer interval


Shankarkumar et al.   Expires February 24, 2017              [Page 14]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


         specification of [IEEE 1588-2008]"
    SYNTAX          OCTET STRING (SIZE (1..255))

PtpClockTimeSourceType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The ClockQuality as specified in Sections 5.3.7, 7.6.2.6 and
        Table 7 of [IEEE 1588-2008].

        The following values are not represented in the enumerated
        values.

        0xF0-0xFE  For use by alternate PTP profiles
        0xFF       Reserved

        It is important to note that section 7.1.1 RFC 2578 allows for
        gaps and enumerate values to start with zero when indicated by
        the protocol."

    REFERENCE       "Section 5.3.7, 7.6.2.6 and Table 7 of
                     [IEEE 1588-2008]."
    SYNTAX          INTEGER  {
                        atomicClock(16), -- 0x10
                        gps(32), -- 0x20
                        terrestrialRadio(48), -- 0x22
                        ptp(64), -- 0x40
                        ntp(80), -- 0x50
                        handSet(96), -- 0x60
                        other(144), -- 0x90
                        internalOscillator(160) -- 0xA0
                    }

PtpClockTxModeType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Transmission mode.

        Unicast:       Using unicast communication channel.
        Multicast:     Using Multicast communication channel.
        multicast-mix: Using multicast-unicast communication channel"
    SYNTAX          INTEGER  {
                        unicast(1),
                        multicast(2),
                        multicastmix(3)
                    }

PtpClockType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION


Shankarkumar et al.   Expires February 24, 2017              [Page 15]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        "The clock types as defined in the MIB module description."

    REFERENCE
        "Section 6.5.1 PTP device types of [IEEE 1588-2008]."
    SYNTAX          INTEGER  {
                        ordinaryClock(1),
                        boundaryClock(2),
                        transparentClock(3),
                        boundaryNode(4)
                    }

ptpbaseMIBNotifs  OBJECT IDENTIFIER
    ::= { ptpbaseMIB 0 }

ptpbaseMIBObjects  OBJECT IDENTIFIER
    ::= { ptpbaseMIB 1 }

ptpbaseMIBConformance  OBJECT IDENTIFIER
    ::= { ptpbaseMIB 2 }

ptpbaseMIBSystemInfo  OBJECT IDENTIFIER
    ::= { ptpbaseMIBObjects 1 }

ptpbaseMIBClockInfo  OBJECT IDENTIFIER
    ::= { ptpbaseMIBObjects 2 }


ptpbaseSystemTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseSystemEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of count information about the PTP system for all
        domains."
    ::= { ptpbaseMIBSystemInfo 1 }

ptpbaseSystemEntry OBJECT-TYPE
    SYNTAX          PtpbaseSystemEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing count information about a
        single domain. New row entries are added when the PTP clock for
        this domain is configured, while the unconfiguration of the PTP
        clock removes it."
    INDEX           {
                        ptpDomainIndex,
                        ptpInstanceIndex
                    }


Shankarkumar et al.   Expires February 24, 2017              [Page 16]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    ::= { ptpbaseSystemTable 1 }

PtpbaseSystemEntry ::= SEQUENCE {
        ptpDomainIndex           PtpClockDomainType,
        ptpInstanceIndex         PtpClockInstanceType,
        ptpDomainClockPortsTotal Gauge32
}

ptpDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
        logical group of PTP devices. The Clock Domain is a logical
        group of clocks and devices that synchronize with each other
        using the PTP protocol.

        0           Default domain
        1           Alternate domain 1
        2           Alternate domain 2
        3           Alternate domain 3
        4 - 127     User-defined domains
        128 - 255   Reserved"
    ::= { ptpbaseSystemEntry 1 }

ptpInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the Clock for this
        domain."
    ::= { ptpbaseSystemEntry 2 }

ptpDomainClockPortsTotal OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "ptp ports"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the total number of clock ports
        configured within a domain in the system."
    ::= { ptpbaseSystemEntry 3 }



ptpbaseSystemDomainTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseSystemDomainEntry


Shankarkumar et al.   Expires February 24, 2017              [Page 17]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP system for all clock modes
        -- ordinary, boundary or transparent."
    ::= { ptpbaseMIBSystemInfo 2 }

ptpbaseSystemDomainEntry OBJECT-TYPE
    SYNTAX          PtpbaseSystemDomainEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        clock mode for the PTP system. A row entry gets added when PTP
        clocks are configured on the node."
    INDEX           { ptpbaseSystemDomainClockTypeIndex }
    ::= { ptpbaseSystemDomainTable 1 }

PtpbaseSystemDomainEntry ::= SEQUENCE {
        ptpbaseSystemDomainClockTypeIndex PtpClockType,
        ptpbaseSystemDomainTotals         Unsigned32
}

ptpbaseSystemDomainClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseSystemDomainEntry 1 }

ptpbaseSystemDomainTotals OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "domains"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the total number of PTP domains for this
        particular clock type configured in this node."
    ::= { ptpbaseSystemDomainEntry 2 }



ptpbaseSystemProfile OBJECT-TYPE
    SYNTAX          PtpClockProfileType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION


Shankarkumar et al.   Expires February 24, 2017              [Page 18]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        "This object specifies the PTP Profile implemented on the
        system."
    REFERENCE       "Section 19.3 PTP profiles of [IEEE 1588-2008]"
    ::= { ptpbaseMIBSystemInfo 3 }

ptpbaseClockCurrentDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockCurrentDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP clock Current Datasets for
        all domains."
    ::= { ptpbaseMIBClockInfo 1 }

ptpbaseClockCurrentDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockCurrentDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        PTP clock Current Datasets for a domain."
    REFERENCE
        "[IEEE 1588-2008] Section 8.2.2 currentDS data set member
        specifications of [IEEE 1588-2008]"
    INDEX           {
                        ptpbaseClockCurrentDSDomainIndex,
                        ptpbaseClockCurrentDSClockTypeIndex,
                        ptpbaseClockCurrentDSInstanceIndex
                    }
    ::= { ptpbaseClockCurrentDSTable 1 }

PtpbaseClockCurrentDSEntry ::= SEQUENCE {
        ptpbaseClockCurrentDSDomainIndex      PtpClockDomainType,
        ptpbaseClockCurrentDSClockTypeIndex   PtpClockType,
        ptpbaseClockCurrentDSInstanceIndex    PtpClockInstanceType,
        ptpbaseClockCurrentDSStepsRemoved     Unsigned32,
        ptpbaseClockCurrentDSOffsetFromMaster PtpClockTimeInterval,
        ptpbaseClockCurrentDSMeanPathDelay    PtpClockTimeInterval
}

ptpbaseClockCurrentDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
logical
        group of PTP devices."
    ::= { ptpbaseClockCurrentDSEntry 1 }


Shankarkumar et al.   Expires February 24, 2017              [Page 19]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



ptpbaseClockCurrentDSClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockCurrentDSEntry 2 }

ptpbaseClockCurrentDSInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockCurrentDSEntry 3 }

ptpbaseClockCurrentDSStepsRemoved OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "Steps"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The current clock dataset StepsRemoved value.

        This object specifies the distance measured by the number of
        Boundary clocks between the local clock and the Foreign master
        as indicated in the stepsRemoved field of Announce messages."
    REFERENCE
        "Section 8.2.2.2 stepsRemoved of [IEEE 1588-2008]"
    ::= { ptpbaseClockCurrentDSEntry 4 }

ptpbaseClockCurrentDSOffsetFromMaster OBJECT-TYPE
    SYNTAX          PtpClockTimeInterval
    UNITS           "Time Interval"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the current clock dataset ClockOffset
        value. The value of the computation of the offset in time
        between a slave and a master clock."
    REFERENCE
        "Section 8.2.2.3 currentDS.offsetFromMaster of [IEEE 1588-2008]"
    ::= { ptpbaseClockCurrentDSEntry 5 }

ptpbaseClockCurrentDSMeanPathDelay OBJECT-TYPE
    SYNTAX          PtpClockTimeInterval


Shankarkumar et al.   Expires February 24, 2017              [Page 20]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    UNITS           "Time Interval"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the current clock dataset
        MeanPathDelay value.

        The mean path delay between a pair of ports as measured by the
        delay request-response mechanism."
    REFERENCE
        "Section 8.2.2.4 currentDS.meanPathDelay of [IEEE 1588-2008]"
    ::= { ptpbaseClockCurrentDSEntry 6 }



ptpbaseClockParentDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockParentDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP clock Parent Datasets for
        all domains."
    ::= { ptpbaseMIBClockInfo 2 }

ptpbaseClockParentDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockParentDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        PTP clock Parent Datasets for a domain."
    REFERENCE
        "Section 8.2.3 parentDS data set member specifications of
        [IEEE 1588-2008]"
    INDEX           {
                        ptpbaseClockParentDSDomainIndex,
                        ptpbaseClockParentDSClockTypeIndex,
                        ptpbaseClockParentDSInstanceIndex
                    }
    ::= { ptpbaseClockParentDSTable 1 }

PtpbaseClockParentDSEntry ::= SEQUENCE {
    ptpbaseClockParentDSDomainIndex            PtpClockDomainType,
    ptpbaseClockParentDSClockTypeIndex         PtpClockType,
    ptpbaseClockParentDSInstanceIndex          PtpClockInstanceType,
    ptpbaseClockParentDSParentPortIdentity     OCTET STRING,
    ptpbaseClockParentDSParentStats            TruthValue,
    ptpbaseClockParentDSOffset                 PtpClockIntervalBase2,
    ptpbaseClockParentDSClockPhChRate          Integer32,


Shankarkumar et al.   Expires February 24, 2017              [Page 21]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    ptpbaseClockParentDSGMClockIdentity        PtpClockIdentity,
    ptpbaseClockParentDSGMClockPriority1       Unsigned32,
    ptpbaseClockParentDSGMClockPriority2       Unsigned32,
    ptpbaseClockParentDSGMClockQualityClass    PtpClockQualityClassType,
    ptpbaseClockParentDSGMClockQualityAccuracy
PtpClockQualityAccuracyType,
    ptpbaseClockParentDSGMClockQualityOffset   Unsigned32
}

ptpbaseClockParentDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
logical
        group of PTP devices."
    ::= { ptpbaseClockParentDSEntry 1 }

ptpbaseClockParentDSClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockParentDSEntry 2 }

ptpbaseClockParentDSInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockParentDSEntry 3 }

ptpbaseClockParentDSParentPortIdentity OBJECT-TYPE
    SYNTAX          OCTET STRING(SIZE(1..256))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the value of portIdentity of the port on
        the master that issues the Sync messages used in synchronizing
        this clock."
    REFERENCE
        "Section 8.2.3.2 parentDS.parentPortIdentity of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 4 }


Shankarkumar et al.   Expires February 24, 2017              [Page 22]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



ptpbaseClockParentDSParentStats OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Parent Dataset ParentStats value.

        This value indicates whether the values of ParentDSOffset
        and ParentDSClockPhChRate have been measured and are valid.
        A TRUE value shall indicate valid data."
    REFERENCE
        "Section 8.2.3.3 parentDS.parentStats of [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 5 }

ptpbaseClockParentDSOffset OBJECT-TYPE
    SYNTAX          PtpClockIntervalBase2 (-128..127)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Parent Dataset
        ParentOffsetScaledLogVariance value.

        This value is the variance of the parent clock's phase as
        measured by the local clock."
    REFERENCE
        "Section 8.2.3.4
        parentDS.observedParentOffsetScaledLogVariance
        [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 6 }

ptpbaseClockParentDSClockPhChRate OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the clock's parent dataset
        ParentClockPhaseChangeRate value.

        This value is an estimate of the parent clock's phase change
        rate as measured by the slave clock."
    REFERENCE
        "Section 8.2.3.5
        parentDS.observedParentClockPhaseChangeRate of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 7 }

ptpbaseClockParentDSGMClockIdentity OBJECT-TYPE
    SYNTAX          PtpClockIdentity


Shankarkumar et al.   Expires February 24, 2017              [Page 23]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the parent dataset Grandmaster clock
        identity."
    REFERENCE
        "Section 8.2.3.6 parentDS.grandmasterIdentity of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 8 }

ptpbaseClockParentDSGMClockPriority1 OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the parent dataset Grandmaster clock
        priority1."
    REFERENCE
        "Section 8.2.3.8 parentDS.grandmasterPriority1 of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 9 }

ptpbaseClockParentDSGMClockPriority2 OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the parent dataset grandmaster clock
        priority2."
    REFERENCE
        "Section 8.2.3.9 parentDS.grandmasterPriority2 of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 10 }

ptpbaseClockParentDSGMClockQualityClass OBJECT-TYPE
    SYNTAX          PtpClockQualityClassType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the parent dataset grandmaster clock
        quality class."
    REFERENCE
        "Section 8.2.3.7 parentDS.grandmasterClockQuality of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 11 }

ptpbaseClockParentDSGMClockQualityAccuracy OBJECT-TYPE
    SYNTAX          PtpClockQualityAccuracyType
    MAX-ACCESS      read-only


Shankarkumar et al.   Expires February 24, 2017              [Page 24]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    STATUS          current
    DESCRIPTION
        "This object specifies the parent dataset grandmaster clock
        quality accuracy."
    REFERENCE
        "Section 8.2.3.7 parentDS.grandmasterClockQuality of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 12 }

ptpbaseClockParentDSGMClockQualityOffset OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the parent dataset grandmaster clock
        quality offset."
    REFERENCE
        "Section 8.2.3.7 parentDS.grandmasterClockQuality of
         [IEEE 1588-2008]"
    ::= { ptpbaseClockParentDSEntry 13 }



ptpbaseClockDefaultDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockDefaultDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP clock Default Datasets for
        all domains."
    ::= { ptpbaseMIBClockInfo 3 }

ptpbaseClockDefaultDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockDefaultDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        PTP clock Default Datasets for a domain."
    INDEX           {
                        ptpbaseClockDefaultDSDomainIndex,
                        ptpbaseClockDefaultDSClockTypeIndex,
                        ptpbaseClockDefaultDSInstanceIndex
                    }
    ::= { ptpbaseClockDefaultDSTable 1 }

PtpbaseClockDefaultDSEntry ::= SEQUENCE {
        ptpbaseClockDefaultDSDomainIndex     PtpClockDomainType,
        ptpbaseClockDefaultDSClockTypeIndex  PtpClockType,


Shankarkumar et al.   Expires February 24, 2017              [Page 25]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        ptpbaseClockDefaultDSInstanceIndex   PtpClockInstanceType,
        ptpbaseClockDefaultDSTwoStepFlag     TruthValue,
        ptpbaseClockDefaultDSClockIdentity   PtpClockIdentity,
        ptpbaseClockDefaultDSPriority1       Unsigned32,
        ptpbaseClockDefaultDSPriority2       Unsigned32,
        ptpbaseClockDefaultDSSlaveOnly       TruthValue,
        ptpbaseClockDefaultDSQualityClass    PtpClockQualityClassType,
        ptpbaseClockDefaultDSQualityAccuracy
PtpClockQualityAccuracyType,
        ptpbaseClockDefaultDSQualityOffset   Integer32
}

ptpbaseClockDefaultDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
logical
        group of PTP devices."
    ::= { ptpbaseClockDefaultDSEntry 1 }

ptpbaseClockDefaultDSClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockDefaultDSEntry 2 }

ptpbaseClockDefaultDSInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockDefaultDSEntry 3 }

ptpbaseClockDefaultDSTwoStepFlag OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies whether the Two Step process is used."
    ::= { ptpbaseClockDefaultDSEntry 4 }

ptpbaseClockDefaultDSClockIdentity OBJECT-TYPE


Shankarkumar et al.   Expires February 24, 2017              [Page 26]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    SYNTAX          PtpClockIdentity
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the default Datasets clock identity."
    ::= { ptpbaseClockDefaultDSEntry 5 }

ptpbaseClockDefaultDSPriority1 OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the default Datasets clock Priority1."
    ::= { ptpbaseClockDefaultDSEntry 6 }

ptpbaseClockDefaultDSPriority2 OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the default Datasets clock Priority2."
    ::= { ptpbaseClockDefaultDSEntry 7 }

ptpbaseClockDefaultDSSlaveOnly OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Whether the SlaveOnly flag is set."
    ::= { ptpbaseClockDefaultDSEntry 8 }

ptpbaseClockDefaultDSQualityClass OBJECT-TYPE
    SYNTAX          PtpClockQualityClassType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the default dataset Quality Class."
    ::= { ptpbaseClockDefaultDSEntry 9 }

ptpbaseClockDefaultDSQualityAccuracy OBJECT-TYPE
    SYNTAX          PtpClockQualityAccuracyType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the default dataset Quality Accuracy."
    ::= { ptpbaseClockDefaultDSEntry 10 }

ptpbaseClockDefaultDSQualityOffset OBJECT-TYPE
    SYNTAX          Integer32


Shankarkumar et al.   Expires February 24, 2017              [Page 27]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the default dataset Quality offset."
    ::= { ptpbaseClockDefaultDSEntry 11 }



ptpbaseClockRunningTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockRunningEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP clock Running Datasets for
        all domains."
    ::= { ptpbaseMIBClockInfo 4 }

ptpbaseClockRunningEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockRunningEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        PTP clock running Datasets for a domain."
    INDEX           {
                        ptpbaseClockRunningDomainIndex,
                        ptpbaseClockRunningClockTypeIndex,
                        ptpbaseClockRunningInstanceIndex
                    }
    ::= { ptpbaseClockRunningTable 1 }

PtpbaseClockRunningEntry ::= SEQUENCE {
        ptpbaseClockRunningDomainIndex     PtpClockDomainType,
        ptpbaseClockRunningClockTypeIndex  PtpClockType,
        ptpbaseClockRunningInstanceIndex   PtpClockInstanceType,
        ptpbaseClockRunningState           PtpClockStateType,
        ptpbaseClockRunningPacketsSent     Counter64,
        ptpbaseClockRunningPacketsReceived Counter64
}

ptpbaseClockRunningDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
        Logical group of PTP devices."
    ::= { ptpbaseClockRunningEntry 1 }



Shankarkumar et al.   Expires February 24, 2017              [Page 28]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


ptpbaseClockRunningClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockRunningEntry 2 }

ptpbaseClockRunningInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockRunningEntry 3 }

ptpbaseClockRunningState OBJECT-TYPE
    SYNTAX          PtpClockStateType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Clock state returned by a PTP
engine."

    ::= { ptpbaseClockRunningEntry 4 }

ptpbaseClockRunningPacketsSent OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the total number of all unicast and
        multicast packets that have been sent out for this clock in this
        domain for this type. These counters are discontinuous."
    ::= { ptpbaseClockRunningEntry 5 }

ptpbaseClockRunningPacketsReceived OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the total number of all unicast and
        multicast packets that have been received for this clock in this
        domain for this type. These counters are discontinuous."
    ::= { ptpbaseClockRunningEntry 6 }




Shankarkumar et al.   Expires February 24, 2017              [Page 29]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



ptpbaseClockTimePropertiesDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockTimePropertiesDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP clock time properties
        datasets for all domains."
    ::= { ptpbaseMIBClockInfo 5 }

ptpbaseClockTimePropertiesDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockTimePropertiesDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        PTP clock timeproperties Datasets for a domain."
    REFERENCE
        "Section 8.2.4 timePropertiesDS data set member specifications
        of [IEEE 1588-2008]"
    INDEX           {
                        ptpbaseClockTimePropertiesDSDomainIndex,
                        ptpbaseClockTimePropertiesDSClockTypeIndex,
                        ptpbaseClockTimePropertiesDSInstanceIndex
                    }
    ::= { ptpbaseClockTimePropertiesDSTable 1 }

PtpbaseClockTimePropertiesDSEntry ::= SEQUENCE {
  ptpbaseClockTimePropertiesDSDomainIndex           PtpClockDomainType,
  ptpbaseClockTimePropertiesDSClockTypeIndex        PtpClockType,
  ptpbaseClockTimePropertiesDSInstanceIndex
PtpClockInstanceType,
  ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid TruthValue,
  ptpbaseClockTimePropertiesDSCurrentUTCOffset      Integer32,
  ptpbaseClockTimePropertiesDSLeap59                TruthValue,
  ptpbaseClockTimePropertiesDSLeap61                TruthValue,
  ptpbaseClockTimePropertiesDSTimeTraceable         TruthValue,
  ptpbaseClockTimePropertiesDSFreqTraceable         TruthValue,
  ptpbaseClockTimePropertiesDSPTPTimescale          TruthValue,
  ptpbaseClockTimePropertiesDSSource
PtpClockTimeSourceType
}

ptpbaseClockTimePropertiesDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION



Shankarkumar et al.   Expires February 24, 2017              [Page 30]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        "This object specifies the domain number used to create a
logical
        group of PTP devices."
    ::= { ptpbaseClockTimePropertiesDSEntry 1 }

ptpbaseClockTimePropertiesDSClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockTimePropertiesDSEntry 2 }

ptpbaseClockTimePropertiesDSInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockTimePropertiesDSEntry 3 }

ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the timeproperties dataset value of
        whether the current UTC offset is valid."
    REFERENCE
        "Section 8.2.4.2 timePropertiesDS.currentUtcOffset of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 4 }

ptpbaseClockTimePropertiesDSCurrentUTCOffset OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the timeproperties dataset value of
        the current UTC offset.

        In PTP systems whose epoch is the PTP epoch, the value of
        timePropertiesDS.currentUtcOffset is the offset
        between TAI and UTC; otherwise the value has no meaning. The
        value shall be in units of seconds."
    REFERENCE
        "Section 8.2.4.3 timePropertiesDS.currentUtcOffsetValid of


Shankarkumar et al.   Expires February 24, 2017              [Page 31]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 5 }

ptpbaseClockTimePropertiesDSLeap59 OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Leap59 value in the clock Current
        Dataset."
    REFERENCE
        "Section 8.2.4.4 timePropertiesDS.leap59 of [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 6 }

ptpbaseClockTimePropertiesDSLeap61 OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Leap61 value in the clock Current
        Dataset."
    REFERENCE
        "Section 8.2.4.5 timePropertiesDS.leap61 of [IEEE 1588-2008]"
 ::= { ptpbaseClockTimePropertiesDSEntry 7 }

ptpbaseClockTimePropertiesDSTimeTraceable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Time Traceable value in the clock
        Current Dataset."
    REFERENCE
        "Section 8.2.4.6 timePropertiesDS.timeTraceable of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 8 }

ptpbaseClockTimePropertiesDSFreqTraceable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Frequency Traceable value in the
        clock Current Dataset."
    REFERENCE
        "Section 8.2.4.7 timePropertiesDS.frequencyTraceable of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 9 }



Shankarkumar et al.   Expires February 24, 2017              [Page 32]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


ptpbaseClockTimePropertiesDSPTPTimescale OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP Timescale value in the clock
        Current Dataset."
    REFERENCE
        "Section 8.2.4.8 timePropertiesDS.ptpTimescale of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 10 }

ptpbaseClockTimePropertiesDSSource OBJECT-TYPE
    SYNTAX          PtpClockTimeSourceType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Timesource value in the clock Current
        Dataset."
    REFERENCE
        "Section 8.2.4.9 timePropertiesDS.timeSource of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTimePropertiesDSEntry 11 }



ptpbaseClockTransDefaultDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockTransDefaultDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the PTP Transparent clock Default
        Datasets for all domains."
    ::= { ptpbaseMIBClockInfo 6 }

ptpbaseClockTransDefaultDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockTransDefaultDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        PTP Transparent clock Default Datasets for a domain."
    REFERENCE
        "Section 8.3.2 transparentClockDefaultDS data set member
        specifications of [IEEE 1588-2008]"
    INDEX           {
                        ptpbaseClockTransDefaultDSDomainIndex,
                        ptpbaseClockTransDefaultDSInstanceIndex
                    }


Shankarkumar et al.   Expires February 24, 2017              [Page 33]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    ::= { ptpbaseClockTransDefaultDSTable 1 }

PtpbaseClockTransDefaultDSEntry ::= SEQUENCE {
        ptpbaseClockTransDefaultDSDomainIndex   PtpClockDomainType,
        ptpbaseClockTransDefaultDSInstanceIndex PtpClockInstanceType,
        ptpbaseClockTransDefaultDSClockIdentity PtpClockIdentity,
        ptpbaseClockTransDefaultDSNumOfPorts    Counter32,
        ptpbaseClockTransDefaultDSDelay         PtpClockMechanismType,
        ptpbaseClockTransDefaultDSPrimaryDomain PtpClockDomainType
}

ptpbaseClockTransDefaultDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
logical
        group of PTP devices."
    ::= { ptpbaseClockTransDefaultDSEntry 1 }

ptpbaseClockTransDefaultDSInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockTransDefaultDSEntry 2 }

ptpbaseClockTransDefaultDSClockIdentity OBJECT-TYPE
    SYNTAX          PtpClockIdentity
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the value of the clockIdentity attribute
        of the local clock."
    REFERENCE
       "Section 8.3.2.2.1 transparentClockDefaultDS.clockIdentity of
       [IEEE 1588-2008]"
    ::= { ptpbaseClockTransDefaultDSEntry 3 }

ptpbaseClockTransDefaultDSNumOfPorts OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the number of PTP ports of the device.
         These counters are discontinuous."


Shankarkumar et al.   Expires February 24, 2017              [Page 34]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    REFERENCE
        "Section 8.3.2.2.2 transparentClockDefaultDS.numberPorts of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTransDefaultDSEntry 4 }

ptpbaseClockTransDefaultDSDelay OBJECT-TYPE
    SYNTAX          PtpClockMechanismType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object, if the transparent clock is an end-to-end
        transparent clock, has the value of E2E; if the
        transparent clock is a peer-to-peer transparent clock, the
        value
        shall be P2P."
    REFERENCE
        "Section 8.3.2.3.1 transparentClockDefaultDS.delayMechanism of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTransDefaultDSEntry 5 }

ptpbaseClockTransDefaultDSPrimaryDomain OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the value of the primary syntonization
        domain. The initialization value shall be 0."
    REFERENCE
        "Section 8.3.2.3.2 transparentClockDefaultDS.primaryDomain of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockTransDefaultDSEntry 6 }



ptpbaseClockPortTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockPortEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the clock ports for a particular
        domain."
    ::= { ptpbaseMIBClockInfo 7 }

ptpbaseClockPortEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockPortEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single


Shankarkumar et al.   Expires February 24, 2017              [Page 35]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        clock port."
    INDEX           {
                        ptpbaseClockPortDomainIndex,
                        ptpbaseClockPortClockTypeIndex,
                        ptpbaseClockPortClockInstanceIndex,
                        ptpbaseClockPortTablePortNumberIndex
                    }
    ::= { ptpbaseClockPortTable 1 }

PtpbaseClockPortEntry ::= SEQUENCE {
        ptpbaseClockPortDomainIndex            PtpClockDomainType,
        ptpbaseClockPortClockTypeIndex         PtpClockType,
        ptpbaseClockPortClockInstanceIndex     PtpClockInstanceType,
        ptpbaseClockPortTablePortNumberIndex   PtpClockPortNumber,
        ptpbaseClockPortName                   DisplayString,
        ptpbaseClockPortRole                   PtpClockRoleType,
        ptpbaseClockPortSyncTwoStep            TruthValue,
        ptpbaseClockPortCurrentPeerAddressType AutonomousType,
        ptpbaseClockPortCurrentPeerAddress
PtpClockPortTransportTypeAddress,
        ptpbaseClockPortNumOfAssociatedPorts   Gauge32
}

ptpbaseClockPortDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
        logical group of PTP devices."
    ::= { ptpbaseClockPortEntry 1 }

ptpbaseClockPortClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockPortEntry 2 }

ptpbaseClockPortClockInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockPortEntry 3 }


Shankarkumar et al.   Expires February 24, 2017              [Page 36]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



ptpbaseClockPortTablePortNumberIndex OBJECT-TYPE
    SYNTAX          PtpClockPortNumber
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP Portnumber for this port."
    ::= { ptpbaseClockPortEntry 4 }

ptpbaseClockPortName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (1..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP clock port name configured on the
        node."
    ::= { ptpbaseClockPortEntry 5 }

ptpbaseClockPortRole OBJECT-TYPE
    SYNTAX          PtpClockRoleType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object describes the current role (slave/master) of the
        port."
    ::= { ptpbaseClockPortEntry 6 }

ptpbaseClockPortSyncTwoStep OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies that two-step clock operation between
        the PTP master and slave device is enabled."
    ::= { ptpbaseClockPortEntry 7 }

ptpbaseClockPortCurrentPeerAddressType OBJECT-TYPE
    SYNTAX          AutonomousType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the current peer's network address type
         used for PTP communication."
    ::= { ptpbaseClockPortEntry 8 }

ptpbaseClockPortCurrentPeerAddress OBJECT-TYPE
    SYNTAX          PtpClockPortTransportTypeAddress
    MAX-ACCESS      read-only
    STATUS          current


Shankarkumar et al.   Expires February 24, 2017              [Page 37]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    DESCRIPTION
        "This object specifies the current peer's network address used
        for PTP communication."
    ::= { ptpbaseClockPortEntry 9 }

ptpbaseClockPortNumOfAssociatedPorts OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies -
        For a master port - the number of PTP slave sessions (peers)
        associated with this PTP port.
        For a slave port - the number of masters available to this slave
        port (might or might not be peered)."
    ::= { ptpbaseClockPortEntry 10 }



ptpbaseClockPortDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockPortDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the clock ports dataset for a
        particular domain."
    ::= { ptpbaseMIBClockInfo 8 }

ptpbaseClockPortDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockPortDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing port dataset information for
        a single clock port."
    INDEX           {
                        ptpbaseClockPortDSDomainIndex,
                        ptpbaseClockPortDSClockTypeIndex,
                        ptpbaseClockPortDSClockInstanceIndex,
                        ptpbaseClockPortDSPortNumberIndex
                    }
    ::= { ptpbaseClockPortDSTable 1 }

PtpbaseClockPortDSEntry ::= SEQUENCE {
        ptpbaseClockPortDSDomainIndex          PtpClockDomainType,
        ptpbaseClockPortDSClockTypeIndex       PtpClockType,
        ptpbaseClockPortDSClockInstanceIndex   PtpClockInstanceType,
        ptpbaseClockPortDSPortNumberIndex      PtpClockPortNumber,
        ptpbaseClockPortDSName                 DisplayString,


Shankarkumar et al.   Expires February 24, 2017              [Page 38]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        ptpbaseClockPortDSPortIdentity         OCTET STRING,
        ptpbaseClockPortDSlogAnnouncementInterval PtpClockIntervalBase2,
        ptpbaseClockPortDSAnnounceRctTimeout   Integer32,
        ptpbaseClockPortDSlogSyncInterval      PtpClockIntervalBase2,
        ptpbaseClockPortDSMinDelayReqInterval  Integer32,
        ptpbaseClockPortDSPeerDelayReqInterval Integer32,
        ptpbaseClockPortDSDelayMech            PtpClockMechanismType,
        ptpbaseClockPortDSPeerMeanPathDelay    PtpClockTimeInterval,
        ptpbaseClockPortDSGrantDuration        Unsigned32,
        ptpbaseClockPortDSPTPVersion           Unsigned32
}

ptpbaseClockPortDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
        logical group of PTP devices."
    ::= { ptpbaseClockPortDSEntry 1 }

ptpbaseClockPortDSClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockPortDSEntry 2 }

ptpbaseClockPortDSClockInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockPortDSEntry 3 }

ptpbaseClockPortDSPortNumberIndex OBJECT-TYPE
    SYNTAX          PtpClockPortNumber
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP portnumber associated with this
        PTP port."
    ::= { ptpbaseClockPortDSEntry 4 }

ptpbaseClockPortDSName OBJECT-TYPE


Shankarkumar et al.   Expires February 24, 2017              [Page 39]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    SYNTAX          DisplayString (SIZE  (1..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP clock port dataset name."
    ::= { ptpbaseClockPortDSEntry 5 }

ptpbaseClockPortDSPortIdentity OBJECT-TYPE
    SYNTAX          OCTET STRING(SIZE(1..256))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP clock port Identity."
    ::= { ptpbaseClockPortDSEntry 6 }

ptpbaseClockPortDSlogAnnouncementInterval OBJECT-TYPE
    SYNTAX          PtpClockIntervalBase2
    UNITS           "Time Interval"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Announce message transmission
        interval associated with this clock port."
    ::= { ptpbaseClockPortDSEntry 7 }

ptpbaseClockPortDSAnnounceRctTimeout OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Announce receipt timeout associated
        with this clock port."
    ::= { ptpbaseClockPortDSEntry 8 }

ptpbaseClockPortDSlogSyncInterval OBJECT-TYPE
    SYNTAX          PtpClockIntervalBase2
    UNITS           "Time Interval"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Sync message transmission interval."
    ::= { ptpbaseClockPortDSEntry 9 }

ptpbaseClockPortDSMinDelayReqInterval OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Delay_Req message transmission


Shankarkumar et al.   Expires February 24, 2017              [Page 40]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        interval."
    ::= { ptpbaseClockPortDSEntry 10 }

ptpbaseClockPortDSPeerDelayReqInterval OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Pdelay_Req message transmission
        interval."
    ::= { ptpbaseClockPortDSEntry 11 }

ptpbaseClockPortDSDelayMech OBJECT-TYPE
    SYNTAX          PtpClockMechanismType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the delay mechanism used. If the clock
        is an end-to-end clock, the value of the is e2e, else if the
        clock is a peer to-peer clock, the value shall be p2p."
    ::= { ptpbaseClockPortDSEntry 12 }

ptpbaseClockPortDSPeerMeanPathDelay OBJECT-TYPE
    SYNTAX          PtpClockTimeInterval
    UNITS           "Time Interval"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the peer meanPathDelay."
    ::= { ptpbaseClockPortDSEntry 13 }

ptpbaseClockPortDSGrantDuration OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the grant duration allocated by the
        master."
    ::= { ptpbaseClockPortDSEntry 14 }

ptpbaseClockPortDSPTPVersion OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP version being used."
    ::= { ptpbaseClockPortDSEntry 15 }



Shankarkumar et al.   Expires February 24, 2017              [Page 41]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017




ptpbaseClockPortRunningTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockPortRunningEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the clock ports running datasets for
        a particular domain."
    ::= { ptpbaseMIBClockInfo 9 }

ptpbaseClockPortRunningEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockPortRunningEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing running dataset information
        about a single clock port."
    INDEX           {
                        ptpbaseClockPortRunningDomainIndex,
                        ptpbaseClockPortRunningClockTypeIndex,
                        ptpbaseClockPortRunningClockInstanceIndex,
                        ptpbaseClockPortRunningPortNumberIndex
                    }
    ::= { ptpbaseClockPortRunningTable 1 }

PtpbaseClockPortRunningEntry ::= SEQUENCE {
        ptpbaseClockPortRunningDomainIndex        PtpClockDomainType,
        ptpbaseClockPortRunningClockTypeIndex     PtpClockType,
        ptpbaseClockPortRunningClockInstanceIndex PtpClockInstanceType,
        ptpbaseClockPortRunningPortNumberIndex    PtpClockPortNumber,
        ptpbaseClockPortRunningName               DisplayString,
        ptpbaseClockPortRunningState              PtpClockPortState,
        ptpbaseClockPortRunningRole               PtpClockRoleType,
        ptpbaseClockPortRunningInterfaceIndex     InterfaceIndexOrZero,
        ptpbaseClockPortRunningTransport          AutonomousType,
        ptpbaseClockPortRunningEncapsulationType  AutonomousType,
        ptpbaseClockPortRunningTxMode             PtpClockTxModeType,
        ptpbaseClockPortRunningRxMode             PtpClockTxModeType,
        ptpbaseClockPortRunningPacketsReceived    Counter64,
        ptpbaseClockPortRunningPacketsSent        Counter64
}

ptpbaseClockPortRunningDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a


Shankarkumar et al.   Expires February 24, 2017              [Page 42]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        logical group of PTP devices."
    ::= { ptpbaseClockPortRunningEntry 1 }

ptpbaseClockPortRunningClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the clock type as defined in the
        Textual convention description."
    ::= { ptpbaseClockPortRunningEntry 2 }

ptpbaseClockPortRunningClockInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockPortRunningEntry 3 }

ptpbaseClockPortRunningPortNumberIndex OBJECT-TYPE
    SYNTAX          PtpClockPortNumber
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP portnumber associated with this
        clock port."
    ::= { ptpbaseClockPortRunningEntry 4 }

ptpbaseClockPortRunningName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (1..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP clock port name."
    ::= { ptpbaseClockPortRunningEntry 5 }

ptpbaseClockPortRunningState OBJECT-TYPE
    SYNTAX          PtpClockPortState
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the port state returned by PTP engine.

        initializing
        faulty
        disabled
        listening


Shankarkumar et al.   Expires February 24, 2017              [Page 43]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        preMaster
        master
        passive
        uncalibrated
        slave        "
    ::= { ptpbaseClockPortRunningEntry 6 }

ptpbaseClockPortRunningRole OBJECT-TYPE
    SYNTAX          PtpClockRoleType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the Clock Role."
    ::= { ptpbaseClockPortRunningEntry 7 }

ptpbaseClockPortRunningInterfaceIndex OBJECT-TYPE
    SYNTAX          InterfaceIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the interface on the node being used by
        the PTP Clock for PTP communication."
    ::= { ptpbaseClockPortRunningEntry 8 }

ptpbaseClockPortRunningTransport OBJECT-TYPE
    SYNTAX          AutonomousType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the transport protocol being used for PTP
        communication (the mapping used)."
    ::= { ptpbaseClockPortRunningEntry 9 }

ptpbaseClockPortRunningEncapsulationType OBJECT-TYPE
    SYNTAX          AutonomousType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the type of encapsulation if the
        interface is adding extra layers (e.g., VLAN, Pseudowire
        encapsulation...) for the PTP messages."
    ::= { ptpbaseClockPortRunningEntry 10 }

ptpbaseClockPortRunningTxMode OBJECT-TYPE
    SYNTAX          PtpClockTxModeType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the clock transmission mode as


Shankarkumar et al.   Expires February 24, 2017              [Page 44]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017



        unicast:       Using unicast communication channel.
        multicast:     Using Multicast communication channel.
        multicast-mix: Using multicast-unicast communication channel"
    ::= { ptpbaseClockPortRunningEntry 11 }

ptpbaseClockPortRunningRxMode OBJECT-TYPE
    SYNTAX          PtpClockTxModeType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the clock receive mode as

        unicast:       Using unicast communication channel.
        multicast:     Using Multicast communication channel.
        multicast-mix: Using multicast-unicast communication channel"
    ::= { ptpbaseClockPortRunningEntry 12 }

ptpbaseClockPortRunningPacketsReceived OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the packets received on the clock port
        (cumulative). These counters are discontinuous."
    ::= { ptpbaseClockPortRunningEntry 13 }

ptpbaseClockPortRunningPacketsSent OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the packets sent on the clock port
        (cumulative). These counters are discontinuous."
    ::= { ptpbaseClockPortRunningEntry 14 }



ptpbaseClockPortTransDSTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockPortTransDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about the Transparent clock ports running
        dataset for a particular domain."
    ::= { ptpbaseMIBClockInfo 10 }



Shankarkumar et al.   Expires February 24, 2017              [Page 45]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


ptpbaseClockPortTransDSEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockPortTransDSEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing clock port Transparent
        dataset information about a single clock port"
    INDEX           {
                        ptpbaseClockPortTransDSDomainIndex,
                        ptpbaseClockPortTransDSInstanceIndex,
                        ptpbaseClockPortTransDSPortNumberIndex
                    }
    ::= { ptpbaseClockPortTransDSTable 1 }

PtpbaseClockPortTransDSEntry ::= SEQUENCE {
        ptpbaseClockPortTransDSDomainIndex        PtpClockDomainType,
        ptpbaseClockPortTransDSInstanceIndex      PtpClockInstanceType,
        ptpbaseClockPortTransDSPortNumberIndex    PtpClockPortNumber,
        ptpbaseClockPortTransDSPortIdentity       PtpClockIdentity,
        ptpbaseClockPortTransDSlogMinPdelayReqInt PtpClockIntervalBase2,
        ptpbaseClockPortTransDSFaultyFlag         TruthValue,
        ptpbaseClockPortTransDSPeerMeanPathDelay  PtpClockTimeInterval
}

ptpbaseClockPortTransDSDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the domain number used to create a
        Logical group of PTP devices."
    ::= { ptpbaseClockPortTransDSEntry 1 }

ptpbaseClockPortTransDSInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockPortTransDSEntry 2 }

ptpbaseClockPortTransDSPortNumberIndex OBJECT-TYPE
    SYNTAX          PtpClockPortNumber
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP port number associated with this
        port."


Shankarkumar et al.   Expires February 24, 2017              [Page 46]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    REFERENCE       "Section 7.5.2 Port Identity of [IEEE 1588-2008]"
    ::= { ptpbaseClockPortTransDSEntry 3 }

ptpbaseClockPortTransDSPortIdentity OBJECT-TYPE
    SYNTAX          PtpClockIdentity
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the value of the PortIdentity
        attribute of the local port."
    REFERENCE
        "Section 8.3.3.2.1 transparentClockPortDS.portIdentity of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockPortTransDSEntry 4 }

ptpbaseClockPortTransDSlogMinPdelayReqInt OBJECT-TYPE
    SYNTAX          PtpClockIntervalBase2
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the value of the logarithm to the
        base 2 of the minPdelayReqInterval."
    REFERENCE
       "Section 8.3.3.3.1 transparentClockPortDS.logMinPdelayReqInterval
        of [IEEE 1588-2008]"
    ::= { ptpbaseClockPortTransDSEntry 5 }

ptpbaseClockPortTransDSFaultyFlag OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the value TRUE if the port is faulty
        and FALSE if the port is operating normally."
    REFERENCE
        "Section 8.3.3.3.2 transparentClockPortDS.faultyFlag of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockPortTransDSEntry 6 }

ptpbaseClockPortTransDSPeerMeanPathDelay OBJECT-TYPE
    SYNTAX          PtpClockTimeInterval
    UNITS           "Time Interval"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies, if the delayMechanism used is P2P, the
        value of the estimate of the current one-way propagation delay,
        i.e., <meanPathDelay> on the link attached to this port,
        computed using the peer delay mechanism. If the value of the


Shankarkumar et al.   Expires February 24, 2017              [Page 47]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        delayMechanism used is E2E, then the value will be zero."
    REFERENCE
        "Section 8.3.3.3.3 transparentClockPortDS.peerMeanPathDelay of
        [IEEE 1588-2008]"
    ::= { ptpbaseClockPortTransDSEntry 7 }



ptpbaseClockPortAssociateTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF PtpbaseClockPortAssociateEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Table of information about a given port's associated ports.

        For a master port: multiple slave ports that have established
                           sessions with the current master port.
        For a slave port:  the list of masters available for a given
                           slave port.

        Session information (packets, errors) to be displayed based on
        availability and scenario."
    ::= { ptpbaseMIBClockInfo 11 }


--
-- Well Known transport types for PTP communication.
--
ptpbaseWellKnownTransportTypes OBJECT IDENTIFIER ::= {
ptpbaseMIBClockInfo 12 }

ptpbaseTransportTypeIPversion4 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "IP version 4"
    ::= { ptpbaseWellKnownTransportTypes 1 }

ptpbaseTransportTypeIPversion6 OBJECT-IDENTITY
   STATUS current
     DESCRIPTION
        "IP version 6"
     ::= { ptpbaseWellKnownTransportTypes 2 }

ptpbaseTransportTypeEthernet OBJECT-IDENTITY
   STATUS current
    DESCRIPTION
        "Ethernet"
     ::= { ptpbaseWellKnownTransportTypes 3 }



Shankarkumar et al.   Expires February 24, 2017              [Page 48]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


ptpbaseTransportTypeDeviceNET OBJECT-IDENTITY
   STATUS current
    DESCRIPTION
        "Device NET"
     ::= { ptpbaseWellKnownTransportTypes 4 }

ptpbaseTransportTypeControlNET OBJECT-IDENTITY
   STATUS current
    DESCRIPTION
        "Control NET"
     ::= { ptpbaseWellKnownTransportTypes 5 }


ptpbaseTransportTypeIEC61158 OBJECT-IDENTITY
   STATUS current
    DESCRIPTION
        "IEC61158"
     ::= { ptpbaseWellKnownTransportTypes 6 }


--
-- Well Known encapsulation types for PTP communication.
--
ptpbaseWellKnownEncapsulationTypes OBJECT IDENTIFIER ::= {
ptpbaseMIBClockInfo 13 }

ptpbaseEncapsulationTypeEthernet OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Ethernet Encapsulation type."
    ::= { ptpbaseWellKnownEncapsulationTypes 1 }


ptpbaseEncapsulationTypeVLAN OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "VLAN Encapsulation type."
    ::= { ptpbaseWellKnownEncapsulationTypes 2 }

ptpbaseEncapsulationTypeUDPIPLSP OBJECT-IDENTITY
   STATUS current
     DESCRIPTION
        "UDP/IP over MPLS Encapsulation type."
     ::= { ptpbaseWellKnownEncapsulationTypes 3 }

ptpbaseEncapsulationTypePWUDPIPLSP OBJECT-IDENTITY
   STATUS current
     DESCRIPTION
        "UDP/IP Pseudowire over MPLS Encapsulation type."


Shankarkumar et al.   Expires February 24, 2017              [Page 49]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


     ::= { ptpbaseWellKnownEncapsulationTypes 4 }

ptpbaseEncapsulationTypePWEthernetLSP OBJECT-IDENTITY
   STATUS current
     DESCRIPTION
        "Ethernet Pseudowire over MPLS Encapsulation type."
     ::= { ptpbaseWellKnownEncapsulationTypes 5 }



ptpbaseClockPortAssociateEntry OBJECT-TYPE
    SYNTAX          PtpbaseClockPortAssociateEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in the table, containing information about a single
        associated port for the given clockport."
    INDEX           {
                        ptpClockPortCurrentDomainIndex,
                        ptpClockPortCurrentClockTypeIndex,
                        ptpClockPortCurrentClockInstanceIndex,
                        ptpClockPortCurrentPortNumberIndex,
                        ptpbaseClockPortAssociatePortIndex
                    }
    ::= { ptpbaseClockPortAssociateTable 1 }

PtpbaseClockPortAssociateEntry ::= SEQUENCE {
        ptpClockPortCurrentDomainIndex           PtpClockDomainType,
        ptpClockPortCurrentClockTypeIndex        PtpClockType,
        ptpClockPortCurrentClockInstanceIndex    PtpClockInstanceType,
        ptpClockPortCurrentPortNumberIndex       PtpClockPortNumber,
        ptpbaseClockPortAssociatePortIndex       Unsigned32,
        ptpbaseClockPortAssociateAddressType     AutonomousType,
        ptpbaseClockPortAssociateAddress
PtpClockPortTransportTypeAddress,
        ptpbaseClockPortAssociatePacketsSent     Counter64,
        ptpbaseClockPortAssociatePacketsReceived Counter64,
        ptpbaseClockPortAssociateInErrors        Counter64,
        ptpbaseClockPortAssociateOutErrors       Counter64
}

ptpClockPortCurrentDomainIndex OBJECT-TYPE
    SYNTAX          PtpClockDomainType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the given port's domain number."
    ::= { ptpbaseClockPortAssociateEntry 1 }



Shankarkumar et al.   Expires February 24, 2017              [Page 50]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


ptpClockPortCurrentClockTypeIndex OBJECT-TYPE
    SYNTAX          PtpClockType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the given port's clock type."
    ::= { ptpbaseClockPortAssociateEntry 2 }

ptpClockPortCurrentClockInstanceIndex OBJECT-TYPE
    SYNTAX          PtpClockInstanceType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the instance of the clock for this clock
        type in the given domain."
    ::= { ptpbaseClockPortAssociateEntry 3 }

ptpClockPortCurrentPortNumberIndex OBJECT-TYPE
    SYNTAX          PtpClockPortNumber
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the PTP Port Number for the given port."
    ::= { ptpbaseClockPortAssociateEntry 4 }

ptpbaseClockPortAssociatePortIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..65535)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the associated port's serial number in
        the current port's context."
    ::= { ptpbaseClockPortAssociateEntry 5 }

ptpbaseClockPortAssociateAddressType OBJECT-TYPE
    SYNTAX          AutonomousType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the peer port's network address type used
        for PTP communication. The OCTET STRING representation of the
        OID of ptpbaseWellKnownTransportTypes will be used in the values
        contained in the OCTET STRING."
    ::= { ptpbaseClockPortAssociateEntry 6 }

ptpbaseClockPortAssociateAddress OBJECT-TYPE
    SYNTAX          PtpClockPortTransportTypeAddress
    MAX-ACCESS      read-only
    STATUS          current


Shankarkumar et al.   Expires February 24, 2017              [Page 51]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    DESCRIPTION
        "This object specifies the peer port's network address used for
        PTP communication."
    ::= { ptpbaseClockPortAssociateEntry 7 }

ptpbaseClockPortAssociatePacketsSent OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of packets sent to this peer port from the current
        port. These counters are discontinuous."
    ::= { ptpbaseClockPortAssociateEntry 8 }

ptpbaseClockPortAssociatePacketsReceived OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of packets received from this peer port by the
        current port. These counters are discontinuous."
    ::= { ptpbaseClockPortAssociateEntry 9 }

ptpbaseClockPortAssociateInErrors OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the input errors associated with the
        peer port. These counters are discontinuous."
    ::= { ptpbaseClockPortAssociateEntry 10 }

ptpbaseClockPortAssociateOutErrors OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the output errors associated with the
        peer port. These counters are discontinuous."
    ::= { ptpbaseClockPortAssociateEntry 11 }


-- Conformance Information Definition

ptpbaseMIBCompliances  OBJECT IDENTIFIER


Shankarkumar et al.   Expires February 24, 2017              [Page 52]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


    ::= { ptpbaseMIBConformance 1 }

ptpbaseMIBGroups  OBJECT IDENTIFIER
    ::= { ptpbaseMIBConformance 2 }


ptpbaseMIBCompliancesSystemInfo MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Compliance statement for agents that provide read-only support
        for PTPBASE-MIB to provide system level information of clock
        devices.
        Such devices can only be monitored using this MIB module.

        The Module is implemented with support for read-only.  In other
        words, only monitoring is available by implementing this
        MODULE-COMPLIANCE."
    MODULE          -- this module
    MANDATORY-GROUPS { ptpbaseMIBSystemInfoGroup }
    ::= { ptpbaseMIBCompliances 1 }

ptpbaseMIBCompliancesClockInfo MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Compliance statement for agents that provide read-only support
        for PTPBASE-MIB to provide clock related information.
        Such devices can only be monitored using this MIB module.

        The Module is implemented with support for read-only. In other
        words, only monitoring is available by implementing this
        MODULE-COMPLIANCE."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ptpbaseMIBClockCurrentDSGroup,
                        ptpbaseMIBClockParentDSGroup,
                        ptpbaseMIBClockDefaultDSGroup,
                        ptpbaseMIBClockRunningGroup,
                        ptpbaseMIBClockTimepropertiesGroup
                    }
    ::= { ptpbaseMIBCompliances 2 }

ptpbaseMIBCompliancesClockPortInfo MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Compliance statement for agents that provide read-only support
        for PTPBASE-MIB to provide clock port related information.
        Such devices can only be monitored using this MIB module.

        The Module is implemented with support for read-only. In other


Shankarkumar et al.   Expires February 24, 2017              [Page 53]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        words, only monitoring is available by implementing this
        MODULE-COMPLIANCE."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ptpbaseMIBClockPortGroup,
                        ptpbaseMIBClockPortDSGroup,
                        ptpbaseMIBClockPortRunningGroup,
                        ptpbaseMIBClockPortAssociateGroup
                    }
    ::= { ptpbaseMIBCompliances 3 }

ptpbaseMIBCompliancesTransparentClockInfo MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Compliance statement for agents that provide read-only support
        for PTPBASE-MIB to provide Transparent clock related
        information.
        Such devices can only be monitored using this MIB module.

        The Module is implemented with support for read-only. In other
        words, only monitoring is available by implementing this
        MODULE-COMPLIANCE."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ptpbaseMIBClockTranparentDSGroup,
                        ptpbaseMIBClockPortTransDSGroup
                    }
    ::= { ptpbaseMIBCompliances 4 }

ptpbaseMIBSystemInfoGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseSystemDomainTotals,
                        ptpDomainClockPortsTotal,
                        ptpbaseSystemProfile
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing system-wide
        information"
    ::= { ptpbaseMIBGroups 1 }

ptpbaseMIBClockCurrentDSGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockCurrentDSStepsRemoved,
                        ptpbaseClockCurrentDSOffsetFromMaster,
                        ptpbaseClockCurrentDSMeanPathDelay
                    }
    STATUS          current
    DESCRIPTION


Shankarkumar et al.   Expires February 24, 2017              [Page 54]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        "Group which aggregates objects describing PTP Current Dataset
        information"
    ::= { ptpbaseMIBGroups 2 }

ptpbaseMIBClockParentDSGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockParentDSParentPortIdentity,
                        ptpbaseClockParentDSParentStats,
                        ptpbaseClockParentDSOffset,
                        ptpbaseClockParentDSClockPhChRate,
                        ptpbaseClockParentDSGMClockIdentity,
                        ptpbaseClockParentDSGMClockPriority1,
                        ptpbaseClockParentDSGMClockPriority2,
                        ptpbaseClockParentDSGMClockQualityClass,
                        ptpbaseClockParentDSGMClockQualityAccuracy,
                        ptpbaseClockParentDSGMClockQualityOffset
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP Parent Dataset
        information"
    ::= { ptpbaseMIBGroups 3 }

ptpbaseMIBClockDefaultDSGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockDefaultDSTwoStepFlag,
                        ptpbaseClockDefaultDSClockIdentity,
                        ptpbaseClockDefaultDSPriority1,
                        ptpbaseClockDefaultDSPriority2,
                        ptpbaseClockDefaultDSSlaveOnly,
                        ptpbaseClockDefaultDSQualityClass,
                        ptpbaseClockDefaultDSQualityAccuracy,
                        ptpbaseClockDefaultDSQualityOffset
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP Default Dataset
        information"
    ::= { ptpbaseMIBGroups 4 }

ptpbaseMIBClockRunningGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockRunningState,
                        ptpbaseClockRunningPacketsSent,
                        ptpbaseClockRunningPacketsReceived
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP running state


Shankarkumar et al.   Expires February 24, 2017              [Page 55]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        information"
    ::= { ptpbaseMIBGroups 5 }

ptpbaseMIBClockTimepropertiesGroup OBJECT-GROUP
    OBJECTS  {
                ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid,
                ptpbaseClockTimePropertiesDSCurrentUTCOffset,
                ptpbaseClockTimePropertiesDSLeap59,
                ptpbaseClockTimePropertiesDSLeap61,
                ptpbaseClockTimePropertiesDSTimeTraceable,
                ptpbaseClockTimePropertiesDSFreqTraceable,
                ptpbaseClockTimePropertiesDSPTPTimescale,
                ptpbaseClockTimePropertiesDSSource
              }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP Time Properties
        information"
    ::= { ptpbaseMIBGroups 6 }

ptpbaseMIBClockTranparentDSGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockTransDefaultDSClockIdentity,
                        ptpbaseClockTransDefaultDSNumOfPorts,
                        ptpbaseClockTransDefaultDSDelay,
                        ptpbaseClockTransDefaultDSPrimaryDomain
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP Transparent
        Dataset
        information"
    ::= { ptpbaseMIBGroups 7 }

ptpbaseMIBClockPortGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockPortName,
                        ptpbaseClockPortSyncTwoStep,
                        ptpbaseClockPortCurrentPeerAddress,
                        ptpbaseClockPortNumOfAssociatedPorts,
                        ptpbaseClockPortCurrentPeerAddressType,
                        ptpbaseClockPortRole
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing information for a
        given PTP Port."
    ::= { ptpbaseMIBGroups 8 }



Shankarkumar et al.   Expires February 24, 2017              [Page 56]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


ptpbaseMIBClockPortDSGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockPortDSName,
                        ptpbaseClockPortDSPortIdentity,
                        ptpbaseClockPortDSlogAnnouncementInterval,
                        ptpbaseClockPortDSAnnounceRctTimeout,
                        ptpbaseClockPortDSlogSyncInterval,
                        ptpbaseClockPortDSMinDelayReqInterval,
                        ptpbaseClockPortDSPeerDelayReqInterval,
                        ptpbaseClockPortDSDelayMech,
                        ptpbaseClockPortDSPeerMeanPathDelay,
                        ptpbaseClockPortDSGrantDuration,
                        ptpbaseClockPortDSPTPVersion
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP Port Dataset
        information"
    ::= { ptpbaseMIBGroups 9 }

ptpbaseMIBClockPortRunningGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockPortRunningName,
                        ptpbaseClockPortRunningState,
                        ptpbaseClockPortRunningRole,
                        ptpbaseClockPortRunningInterfaceIndex,
                        ptpbaseClockPortRunningTransport,
                        ptpbaseClockPortRunningEncapsulationType,
                        ptpbaseClockPortRunningTxMode,
                        ptpbaseClockPortRunningRxMode,
                        ptpbaseClockPortRunningPacketsReceived,
                        ptpbaseClockPortRunningPacketsSent
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP running interface
        information"
    ::= { ptpbaseMIBGroups 10 }

ptpbaseMIBClockPortTransDSGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockPortTransDSPortIdentity,
                        ptpbaseClockPortTransDSlogMinPdelayReqInt,
                        ptpbaseClockPortTransDSFaultyFlag,
                        ptpbaseClockPortTransDSPeerMeanPathDelay
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing PTP TransparentDS


Shankarkumar et al.   Expires February 24, 2017              [Page 57]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


        information"
    ::= { ptpbaseMIBGroups 11 }

ptpbaseMIBClockPortAssociateGroup OBJECT-GROUP
    OBJECTS         {
                        ptpbaseClockPortAssociatePacketsSent,
                        ptpbaseClockPortAssociatePacketsReceived,
                        ptpbaseClockPortAssociateAddress,
                        ptpbaseClockPortAssociateAddressType,
                        ptpbaseClockPortAssociateInErrors,
                        ptpbaseClockPortAssociateOutErrors
                    }
    STATUS          current
    DESCRIPTION
        "Group which aggregates objects describing information on peer
        PTP ports for a given PTP clock-port."
    ::= { ptpbaseMIBGroups 12 }


END

5. Security Considerations

   There are no management objects defined in this MIB module that have
   a MAX-ACCESS clause of read-write and/or read-create.  So, if this
   MIB module is implemented correctly, then there is no risk that an
   intruder can alter or create any management objects of this MIB
   module via direct SNMP SET operations.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.

   The following objects all have a MAX-ACCESS of read-only:

     ptpDomainClockPortsTotal,
     ptpbaseSystemDomainTotals,
     ptpbaseSystemProfile expose general information about the clock
     system.

     ptpbaseClockRunningState,
     ptpbaseClockRunningPacketsSent,
     ptpbaseClockRunningPacketsReceived expose a clock's current running
     status.

     ptpbaseClockCurrentDSStepsRemoved,


Shankarkumar et al.   Expires February 24, 2017              [Page 58]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


     ptpbaseClockCurrentDSOffsetFromMaster,
     ptpbaseClockCurrentDSMeanPathDelay expose the values of a clock's
     current dataset (currentDS).

     ptpbaseClockParentDSParentPortIdentity,
     ptpbaseClockParentDSParentStats,
     ptpbaseClockParentDSOffset,
     ptpbaseClockParentDSClockPhChRate,
     ptpbaseClockParentDSGMClockIdentity,
     ptpbaseClockParentDSGMClockPriority1,
     ptpbaseClockParentDSGMClockPriority2,
     ptpbaseClockParentDSGMClockQualityClass,
     ptpbaseClockParentDSGMClockQualityAccuracy,
     ptpbaseClockParentDSGMClockQualityOffset expose the values of a
     clock's parent dataset (parentDS).

     ptpbaseClockDefaultDSTwoStepFlag,
     ptpbaseClockDefaultDSClockIdentity,
     ptpbaseClockDefaultDSPriority1,
     ptpbaseClockDefaultDSPriority2,
     ptpbaseClockDefaultDSSlaveOnly,
     ptpbaseClockDefaultDSQualityClass,
     ptpbaseClockDefaultDSQualityAccuracy,
     ptpbaseClockDefaultDSQualityOffset expose the values of a clock's
     default dataset (defaultDS).

     ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid,
     ptpbaseClockTimePropertiesDSCurrentUTCOffset,
     ptpbaseClockTimePropertiesDSLeap59,
     ptpbaseClockTimePropertiesDSLeap61,
     ptpbaseClockTimePropertiesDSTimeTraceable,
     ptpbaseClockTimePropertiesDSFreqTraceable,
     ptpbaseClockTimePropertiesDSPTPTimescale,
     ptpbaseClockTimePropertiesDSSource expose the values of a clock's
     time properties dataset (timePropertiesDS).

     ptpbaseClockTransDefaultDSClockIdentity,
     ptpbaseClockTransDefaultDSNumOfPorts,
     ptpbaseClockTransDefaultDSDelay,
     ptpbaseClockTransDefaultDSPrimaryDomain expose the values of a
     transparent clock's default dataset (transparentClockDefaultDS).

     ptpbaseClockPortName,
     ptpbaseClockPortRole,
     ptpbaseClockPortSyncTwoStep,
     ptpbaseClockPortCurrentPeerAddressType,
     ptpbaseClockPortCurrentPeerAddress,
     ptpbaseClockPortNumOfAssociatedPorts expose general information
     about a clock port.


Shankarkumar et al.   Expires February 24, 2017              [Page 59]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


     ptpbaseClockPortRunningName,
     ptpbaseClockPortRunningState,
     ptpbaseClockPortRunningRole,
     ptpbaseClockPortRunningInterfaceIndex,
     ptpbaseClockPortRunningTransport,
     ptpbaseClockPortRunningEncapsulationType,
     ptpbaseClockPortRunningTxMode,
     ptpbaseClockPortRunningRxMode,
     ptpbaseClockPortRunningPacketsReceived,
     ptpbaseClockPortRunningPacketsSent expose a clock port's current
     running status.

     ptpbaseClockPortDSName,
     ptpbaseClockPortDSPortIdentity,
     ptpbaseClockPortDSlogAnnouncementInterval,
     ptpbaseClockPortDSAnnounceRctTimeout,
     ptpbaseClockPortDSlogSyncInterval,
     ptpbaseClockPortDSMinDelayReqInterval,
     ptpbaseClockPortDSPeerDelayReqInterval,
     ptpbaseClockPortDSDelayMech,
     ptpbaseClockPortDSPeerMeanPathDelay,
     ptpbaseClockPortDSGrantDuration,
     ptpbaseClockPortDSPTPVersion expose the values of a clock port's
     port dataset (portDS).

     ptpbaseClockPortTransDSPortIdentity,
     ptpbaseClockPortTransDSlogMinPdelayReqInt,
     ptpbaseClockPortTransDSFaultyFlag,
     ptpbaseClockPortTransDSPeerMeanPathDelay expose the values of a
     transparent clock port's port dataset (transparentClockPortDS).

     ptpbaseClockPortAssociateAddressType,
     ptpbaseClockPortAssociateAddress,
     ptpbaseClockPortAssociatePacketsSent,
     ptpbaseClockPortAssociatePacketsReceived,
     ptpbaseClockPortAssociateInErrors,
     ptpbaseClockPortAssociateOutErrors expose information about a clock
     port's peer node.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET (read) the objects in this MIB module.

   Implementations SHOULD provide the security features described by the
   SNMPv3 framework (see [RFC 3410]), and implementations claiming
   compliance to the SNMPv3 standard MUST include full support for
   authentication and privacy via the User-based Security Model (USM)
   [RFC 3414] with the AES cipher algorithm [RFC 3826]. Implementations


Shankarkumar et al.   Expires February 24, 2017              [Page 60]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   MAY also provide support for the Transport Security Model (TSM)
   [RFC 5591] in combination with a secure transport such as SSH
   [RFC 5592] or TLS/DTLS [RFC 6353].

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   recommended.  Instead, it is recommended to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   those objects only to those principals (users) that have legitimate
   rights to access them.

6. IANA Considerations

   The MIB module defined in this document uses the following IANA-
   assigned OBJECT IDENTIFIER value recorded in the SMI Numbers
   registry:

           Descriptor        OBJECT IDENTIFIER value
           ----------        -----------------------
           ptpbaseMIB        { mib-2 xxx }

   [NOTE for IANA: Please allocate an object identifier at
   http://www.iana.org/assignments/smi-numbers for object ptpbaseMIB.]

7. References

7.1. Normative References

   [IEEE 1588-2008] "IEEE Standard for A Precision Clock Synchronization
   Protocol for Networked Measurement and Control Systems", IEEE Std.
   1588(TM)-2008, 24 July 2008

7.2. Informative References

   [RFC 1155] Rose, M., and K. McCloghrie, "Structure and Identification
   of Management Information for TCP/IP-based Internets", STD 16, RFC
   1155, Performance Systems International, Hughes LAN Systems, May 1990

   [RFC 1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin,
   "Simple Network Management Protocol", STD 15, RFC 1157, SNMP
   Research, Performance Systems International, Performance Systems
   International, MIT Laboratory for Computer Science, May 1990.

   [RFC 1212] Rose, M., and K. McCloghrie, "Concise MIB Definitions",
   STD 16, RFC 1212, Performance Systems International, Hughes LAN
   Systems, March 1991

   [RFC 1215] M. Rose, "A Convention for Defining Traps for use with the


Shankarkumar et al.   Expires February 24, 2017              [Page 61]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   SNMP", RFC 1215, Performance Systems International, March 1991

   [RFC 1901]  SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M.,
   and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC
   1901, SNMP Research, Inc., Cisco Systems, Inc., Dover Beach
   Consulting, Inc., International Network Services, January 1996.

   [RFC 1906] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M.,
   and S. Waldbusser, "Transport Mappings for Version 2 of the Simple
   Network Management Protocol (SNMPv2)", RFC 1906, SNMP Research, Inc.,
   Cisco Systems, Inc., Dover Beach Consulting, Inc., International
   Network Services, January 1996.

   [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
   Requirement Levels", RFC 2119 Harvard University, March 1997.

   [RFC 2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
   "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC
   2578, April 1999.

   [RFC 2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
   "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.

   [RFC 2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
   "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.

   [RFC 3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
   "Introduction and Applicability Statements for Internet Standard
   Management Framework", RFC 3410 SNMP Research, Inc., Network
   Associates Laboratories, Ericsson, December 2002.

   [RFC 3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
   Architecture for Describing Simple Network Management Protocol (SNMP)
   Management Frameworks", STD 62, RFC 3411, Enterasys Networks, BMC
   Software, Inc., Lucent Technologies, December 2002

   [RFC 3412] Case, J., Harrington D., Presuhn R., and B. Wijnen,
   "Message Processing and Dispatching for the Simple Network Management
   Protocol (SNMP)", STD 62, RFC 3412, SNMP Research, Inc., Enterasys
   Networks, BMC Software, Inc., Lucent Technologies, December 2002.

   [RFC 3413] Levi, D., Meyer, P., and B. Stewart, "Simple Network
   Management Protocol (SNMP) Applications", STD 62, RFC 3413, Nortel
   Networks, Secure Computing Corporation, December 2002.

   [RFC 3414] Blumenthal, U., and B. Wijnen, "User-based Security Model
   (USM) for version 3 of the Simple Network Management Protocol
   (SNMPv3)", STD 62, RFC 3414, Lucent Technologies, December 2002.



Shankarkumar et al.   Expires February 24, 2017              [Page 62]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   [RFC 3415] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
   Access Control Model (VACM) for the Simple Network Management
   Protocol (SNMP)", STD 62, RFC 3415, Lucent Technologies, BMC
   Software, Inc., Cisco Systems, Inc., December 2002.

   [RFC 3416] Presuhn, R. (Ed.), "Version 2 of the Protocol Operations
   for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3416,
   BMC Software, Inc., December 2002.

   [RFC 3417] Presuhn, R. (Ed.), "Transport Mappings for the Simple
   Network Management Protocol (SNMP)", STD 62, RFC 3417, BMC Software,
   Inc., December 2002.

   [RFC 3826] Blumenthal, U., Maino, F, and K. McCloghrie, "The Advanced
   Encryption Standard (AES) Cipher Algorithm in the SNMP User-based
   Security Model", RFC 3826, Lucent Technologies, Andiamo Systems,
   Inc., Cisco Systems, Inc., June 2004.

   [RFC 5591] Harrington, D., and W. Hardraker, "Transport Security
   Model for the Simple Network Management Protocol (SNMP)", RFC 5591,
   Huawei Technologies (USA), Cobham Analytic Solutions, June 2009.

   [RFC 5592] Harrington, D., Salowey, J., and W. Hardraker, "Secure
   Shell Transport Model for the Simple Network Management Protocol
   (SNMP) ", RFC 5592, Huawei Technologies (USA), Cisco Systems, Cobham
   Analytic Solutions, June 2009.

   [RFC 5905] David L. Mills, "Network Time Protocol Version 4: Protocol
   and Algorithms Specification", RFC 5905, University of Delaware, June
   2010.

   [RFC 6353] Hardraker, W., "Transport Layer Security (TLS) Transport
   Model for the Simple Network Management Protocol (SNMP)", RFC 6353,
   SPARTA, Inc., July 2011.

   [IEEE 802.3-2012] "IEEE Standard for Ethernet", IEEE Std. 802.3 -
   2015, 3 September 2015

   [G.8265.1] "Precision time protocol telecom profile for frequency
   synchronization", ITU-T Recommendation G.8265.1, July 2014.

8. Acknowledgements

   Thanks to John Linton and Danny Lee for valuable comments, and to
   Bert Wijnen, Kevin Gross, Alan Luchuk, Chris Elliot, Brian Haberman
   and Dan Romascanu for their reviews of this MIB module.

9. Author's Addresses



Shankarkumar et al.   Expires February 24, 2017              [Page 63]

Internet-Draft      draft-ietf-tictoc-ptp-mib-12.txt     March 17, 2017


   Vinay Shankarkumar
   Cisco Systems,
   7100-9 Kit Creek Road,
   Research Triangle Park,
   NC 27709,
   USA.

   Email: vinays@cisco.com

   Laurent Montini,
   Cisco Systems,
   11, rue Camille Desmoulins,
   92782 Issy-les-Moulineaux,
   France.

   Email: lmontini@cisco.com

   Tim Frost,
   Calnex Solutions Ltd.,
   Oracle Campus,
   Linlithgow,
   EH49 7LR,
   UK.

   Email: tim.frost@calnexsol.com

   Greg Dowd,
   Microsemi Inc.,
   3870 North First Street,
   San Jose,
   CA 95134,
   USA.

   Email: greg.dowd@microsemi.com
















Shankarkumar et al.   Expires February 24, 2017              [Page 64]