Internet DRAFT - draft-fossati-core-multipart-ct
draft-fossati-core-multipart-ct
CoRE C. Bormann
Internet-Draft Universitaet Bremen TZI
Intended status: Standards Track June 08, 2018
Expires: December 10, 2018
Multipart Content-Format for CoAP
draft-fossati-core-multipart-ct-05
Abstract
This memo defines application/multipart-core, an application-
independent media-type that can be used to combine representations of
several different media types into a single CoAP message-body with
minimal framing overhead, each along with a CoAP Content-Format
identifier.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 10, 2018.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Bormann Expires December 10, 2018 [Page 1]
Internet-Draft Multipart Content-Format for CoAP June 2018
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Multipart Content-Format Encoding . . . . . . . . . . . . . . 2
3. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 3
3.1. Registration of media type application/multipart-core . . 3
3.2. Registration of a Content-Format identifier for
application/multipart-core . . . . . . . . . . . . . . . 4
4. Security Considerations . . . . . . . . . . . . . . . . . . . 4
5. References . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.1. Normative References . . . . . . . . . . . . . . . . . . 5
5.2. Informative References . . . . . . . . . . . . . . . . . 5
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 5
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 5
1. Introduction
This memo defines application/multipart-core, an application-
independent media-type that can be used to combine representations of
several different media types into a single CoAP [RFC7252] message-
body with minimal framing overhead, each along with a CoAP Content-
Format identifier.
This simple and efficient binary framing mechanism can be employed to
create application specific request and response bodies which build
on multiple already existing media types.
Applications using the application/multipart-core Content-Format
define the internal structure of the application/multipart-core
representation.
For example, one way to structure the sub-types specific to an
application/multipart-core container is to always include them at the
same fixed position. This specification allows to indicate that an
optional part is not present by substituting a null value for the
representation of the part.
Optionally, an application might use the general format defined here,
but also register a new media type and an associated Content-Format
identifier -- typically one in the range 10000-64999 -- instead of
using application/multipart-core.
2. Multipart Content-Format Encoding
A representation of media-type application/multipart-core contains a
collection of zero or more representations, each along with their
respective content format.
Bormann Expires December 10, 2018 [Page 2]
Internet-Draft Multipart Content-Format for CoAP June 2018
The collection is encoded as a CBOR [RFC7049] array with an even
number of elements. The second, fourth, sixth, etc. element is a
byte string containing a representation, or the value "null" if an
optional part is indicated as not given. The first, third, fifth,
etc. element is an unsigned integer specifying the content format ID
of the representation following it. Where needed by an application,
each such format identifying element alternatively can be a text
string giving the media type name plus potentially some parameters.
For example, a collection containing two representations, one with
content format ID 42 and one with content format ID 0, looks like
this in CBOR diagnostic notation:
[42, h'0123456789abcdef', 0, h'3031323334']
For illustration, the structure of an application/multipart-core
representation can be described by the CDDL [I-D.ietf-cbor-cddl]
specification in Figure 1:
multipart-core = [* multipart-part]
multipart-part = (type: uint .size 2 / text, part: bytes / null)
Figure 1: CDDL for application/multipart-core
3. IANA Considerations
3.1. Registration of media type application/multipart-core
IANA is requested to register the following media type [RFC6838]:
Type name: application
Subtype name: multipart-core
Required parameters: N/A
Optional parameters: N/A
Encoding considerations: binary
Security considerations: See the Security Considerations Section of
RFCthis
Interoperability considerations: N/A
Published specification: RFCthis
Bormann Expires December 10, 2018 [Page 3]
Internet-Draft Multipart Content-Format for CoAP June 2018
Applications that use this media type: Applications that need to
combine representations of potentially several media types into
one, e.g., EST-CoAP [I-D.ietf-ace-coap-est]
Fragment identifier considerations: N/A
Additional information:
Deprecated alias names for this type: N/A
Magic number(s): N/A
File extension(s): N/A
Macintosh file type code(s): N/A
Person & email address to contact for further information:
iesg&ietf.org
Intended usage: COMMON
Restrictions on usage: N/A
Author: CoRE WG
Change controller: IESG
Provisional registration? (standards tree only): no
3.2. Registration of a Content-Format identifier for application/
multipart-core
IANA is requested to register the following Content-Format to the
"CoAP Content-Formats" subregistry, within the "Constrained RESTful
Environments (CoRE) Parameters" registry, from the IETF Review space
(specifically, 256..999):
+----------------------------+----------+------+-----------+
| Media Type | Encoding | ID | Reference |
+----------------------------+----------+------+-----------+
| application/multipart-core | -- | TBD1 | RFCthis |
+----------------------------+----------+------+-----------+
4. Security Considerations
The security considerations of [RFC7049] apply. In particular,
resource exhaustion attacks may employ large values for the byte
Bormann Expires December 10, 2018 [Page 4]
Internet-Draft Multipart Content-Format for CoAP June 2018
string size fields, or deeply nested structures of recursively
embedded application/multipart-core representations.
5. References
5.1. Normative References
[RFC7049] Bormann, C. and P. Hoffman, "Concise Binary Object
Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049,
October 2013, <https://www.rfc-editor.org/info/rfc7049>.
[RFC7252] Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
Application Protocol (CoAP)", RFC 7252,
DOI 10.17487/RFC7252, June 2014,
<https://www.rfc-editor.org/info/rfc7252>.
5.2. Informative References
[I-D.ietf-ace-coap-est]
Stok, P., Kampanakis, P., Kumar, S., Richardson, M.,
Furuhed, M., and S. Raza, "EST over secure CoAP (EST-
coaps)", draft-ietf-ace-coap-est-01 (work in progress),
June 2018.
[I-D.ietf-cbor-cddl]
Birkholz, H., Vigano, C., and C. Bormann, "Concise data
definition language (CDDL): a notational convention to
express CBOR data structures", draft-ietf-cbor-cddl-02
(work in progress), February 2018.
[RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type
Specifications and Registration Procedures", BCP 13,
RFC 6838, DOI 10.17487/RFC6838, January 2013,
<https://www.rfc-editor.org/info/rfc6838>.
Acknowledgements
Most of the text in this draft is from earlier contributions by
Thomas Fossati and Klaus Hartke. The re-mix in this document is
based on the requirements in [I-D.ietf-ace-coap-est], based on
discussions with Michael Richardson, Panos Kampanis and Peter van der
Stok.
Author's Address
Bormann Expires December 10, 2018 [Page 5]
Internet-Draft Multipart Content-Format for CoAP June 2018
Carsten Bormann
Universitaet Bremen TZI
Postfach 330440
Bremen D-28359
Germany
Phone: +49-421-218-63921
Email: cabo@tzi.org
Bormann Expires December 10, 2018 [Page 6]
