SIP Core R. Shekh-Yusef, Ed. Internet-Draft Avaya Updates: 3261 (if approved) C. Holmberg Intended status: Standards Track Ericsson Expires: September 10, 2017 V. Pascual Oracle March 9, 2017 Third-Party Authentication for Session Initiation Protocol (SIP) draft-yusef-sipcore-sip-authn-01 Abstract This document defines an authentication mechanism for SIP, that is based on the OAuth 2.0 and OpenID Connect Core 1.0 specifications, to enable the delegation of the user authentication to a dedicated third-party IdP entity that is separate from the SIP network elements that provide the SIP service. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on September 10, 2017. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must Shekh-Yusef, et al. Expires September 10, 2017 [Page 1] Internet-Draft Third-Party Authentication for SIP March 2017 include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3 1.2. Roles . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3. ID Token . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4. SIP User Agent Types . . . . . . . . . . . . . . . . . . 5 1.5. Authentication Types . . . . . . . . . . . . . . . . . . 5 2. Authentication using the Authorization Code Flow . . . . . . 6 2.1. Public UA with Rich UI . . . . . . . . . . . . . . . . . 6 2.1.1. Registration . . . . . . . . . . . . . . . . . . . . 7 2.1.2. Shared-Key . . . . . . . . . . . . . . . . . . . . . 8 2.1.3. Re-Registration Requests . . . . . . . . . . . . . . 8 2.1.4. Token Refresh . . . . . . . . . . . . . . . . . . . . 9 2.2. Public UA with Limited UI . . . . . . . . . . . . . . . . 10 2.2.1. Registration . . . . . . . . . . . . . . . . . . . . 10 2.2.2. Shared-Key . . . . . . . . . . . . . . . . . . . . . 11 2.2.3. Token Refresh . . . . . . . . . . . . . . . . . . . . 11 2.2.4. Re-Registration Requests . . . . . . . . . . . . . . 12 3. Authentication using the Resource Owner Password Credentials flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . 13 3.2. Registration . . . . . . . . . . . . . . . . . . . . . . 13 3.3. Subsequent Requests . . . . . . . . . . . . . . . . . . . 14 4. Authorization Header Syntax . . . . . . . . . . . . . . . . . 14 5. Security Considerations . . . . . . . . . . . . . . . . . . . 15 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 15 8. Normative References . . . . . . . . . . . . . . . . . . . . 15 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 15 Shekh-Yusef, et al. Expires September 10, 2017 [Page 2] Internet-Draft Third-Party Authentication for SIP March 2017 1. Introduction The SIP protocol [RFC3261] uses the framework used by the HTTP protocol for authenticating users, which is a simple challenge- response authentication mechanism that allows a server to challenge a client request and allows a client to provide authentication information in response to that challenge. OAuth 2.0 [RFC6749] defines a token based authorization framework to allow clients to access resources on behalf of their user. The OpenID Connect 1.0 [OPENID] specifications defines a simple identity layer on top of the OAuth 2.0 protocol, which enables clients to verify the identity of the user based on the authentication performed by a dedicated IdP entity, as well as to obtain basic profile information about the user. This document defines an authentication mechanism for SIP, that is based on the OAuth 2.0 and OpenID Connect Core 1.0 specifications, to enable the delegation of the user authentication to a dedicated third-party IdP entity that is separate from the SIP network elements that provide the SIP service. 1.1. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 1.2. Roles resource owner An entity capable of granting access to a protected resource. When the resource owner is a person, it is referred to as an end-user. In a typical SIP network, it is the management element in the system that acts as a resource owner. resource server The server hosting the protected resources or services, capable of accepting and responding to protected resource and services requests using access tokens. Shekh-Yusef, et al. Expires September 10, 2017 [Page 3] Internet-Draft Third-Party Authentication for SIP March 2017 OAuth 2.0 client An application making protected resource requests on behalf of the resource owner and with its authorization. The term "client" does not imply any particular implementation characteristics (e.g., whether the application executes on a server, a desktop, or other devices). SIP client An application making requests to access SIP services on behalf of the end-user. authorization server The server issuing tokens to the OAuth 2.0 client or SIP Client after successfully authenticating the resource owner and obtaining authorization. Identity Provider (IdP) This definition is borrowed from [MITKB] "IdP (Identity Provider), is a system that creates, maintains, and manages identity information for principals (users, services, or systems) and provides principal authentication to other service providers (applications) within a federation or distributed network. It is a trusted third party that can be relied upon by users and servers when users and servers are establishing a dialog that must be authenticated. The IdP sends an attribute assertion containing trusted information about the user to the SP". 1.3. ID Token ID token, as defined in the OpenID document, is a security token that contains claims about the authentication of an end-user by an authorization server. Shekh-Yusef, et al. Expires September 10, 2017 [Page 4] Internet-Draft Third-Party Authentication for SIP March 2017 1.4. SIP User Agent Types [RFC6749] defines two types of clients, confidential and public, that apply to the SIP User Agents. o Confidential User Agent: is a SIP UA that is capable of maintaining the confidentiality of the user credentials and any tokens obtained using these user credentials. o Public User Agent: is a SIP UA that is incapable of maintainings the confidentiality of the user credentials and any obtained tokens. 1.5. Authentication Types There are two types of user authentications in SIP: o Proxy-to-User: which allows a server that is providing a service to authenticate the identity of a user before providing the service. o User-to-User: which allows a user receiving a request to authenticate the identity of the remote user before processing the request. The mechanism defined in this document addresses the proxy-to-user authentication only. For user-to-user authentication refer to the mechanism defined in [STIR]. Shekh-Yusef, et al. Expires September 10, 2017 [Page 5] Internet-Draft Third-Party Authentication for SIP March 2017 2. Authentication using the Authorization Code Flow Authorization Code Flow is used by the SIP UA to authenticate to a third-party IdP entity to obtain an authorization code that would be later used by the SIP Proxy to obtain tokens to allow the SIP UA to register and get service from the SIP network. 2.1. Public UA with Rich UI The following figure provides a high level view of flow of messages for the user authentication using a Public UA that has a rich UI that would prompt the user for his credentials: User Proxy Authorization Agent Server --------------------------------------------------------------------- | | | | F1 REGISTER | | |------------------------------>| | | F2 302 | | |<------------------------------| | | | | | | | The UA prompts the user to provide his/her credentials. | The UA then, as per OAuth 2.0 protocol, authenticates the user to | the AuthZ server, and obtains an authorization code, which the UA | will later hand to the Proxy. | |<------------------------------------------------------------->| | | | | | | | F3 REGISTER [authz code] | | |------------------------------>| | | | | | | The proxy will then use the | | | authz code to obtain tokens | | | from the authz server | | |<----------------------------->| | | | | F4 200 OK | | |<------------------------------| | | | | Both the proxy and the UA will then create a shared-key based on | the from-tag, to-tag, and call-id are taken from the 200 OK | | | | Shekh-Yusef, et al. Expires September 10, 2017 [Page 6] Internet-Draft Third-Party Authentication for SIP March 2017 The UA initially sends a REGISTER request (F1) without providing any credentials. The proxy redirects the UA by responding with 302 (F2). The UA will then contact the Authorization Server and obtain an authorization code to be used with the SIP proxy. The UA then retries the request (F3) and includes the authorization code in the body of the request. The proxy then contacts the Authorization Server and exchanges the authorization code for tokens. If the proxy is successful in exchanging the authorization code with the tokens, the proxy then replies with 200 OK to completed the registration process, and locally generates the shared-key with the UA for this user. When the UA receives the 200 OK, it will follow the same procedure used by the proxy and calculate its shared-key locally. 2.1.1. Registration The UA initiates the process by sending a REGISTER request (F1) to the proxy. The proxy will redirect the UA to the Authorization Server by responding with 302 (F2) that includes the address of the Authorization Server in the form of an HTTP URI. The UA will then contact the Authorization Server and obtain an authorization code to be used with the SIP proxy. The method used by the UA to obtain the code is out of scope for this document. Then, the UA will send a new REGISTER request (F3) and include the authorization code in the body of the request with the following parameters: grant_type (REQUIRED) Value MUST be set to "authorization_code". code (REQUIRED) The authorization code received from the authorization server. Shekh-Yusef, et al. Expires September 10, 2017 [Page 7] Internet-Draft Third-Party Authentication for SIP March 2017 The proxy then contacts the Authorization Server and exchanges the authorization code for ID token, access token, and refresh token. The method used by the UA to obtain the tokens is out of scope for this document. If the proxy is successful in exchanging the authorization code with the tokens, the proxy then responds with 200 OK (F4) to the UA to complete the registration process. 2.1.2. Shared-Key After sending the 200 OK to the UA to complete the registration process, the proxy and the UA use the HMAC-SHA256(key, message) to calculates the shared-key associated with this user as follows: key The authorization code obtained from the Authorization Server. message The concatenation of the 'from-tag', 'to-tag', and 'call-id' of the 200 OK that completes the registration process. This shared-key will be used to allow the UA to re-register to the proxy, in case of a connection lost to the proxy, without the need to obtain a new code or prompt the user for his credentials. 2.1.3. Re-Registration Requests When the UA loses its connection to the proxy and it wants to send a new registration request to the proxy, the UA will send a new REGISTER request and include the proof-of-possession (pop) of the shared-key in the body of the request: grant_type (REQUIRED) Value MUST be set to "proof_of_possession". pop (REQUIRED) The pop calculated the first time the UA registered with the proxy. Shekh-Yusef, et al. Expires September 10, 2017 [Page 8] Internet-Draft Third-Party Authentication for SIP March 2017 The pop is calculated using the shared-key as follows: pop = HMAC-SHA256(shared-key, digest-string) See rfc4474, section 9, for the SIP headers to hash to create digest- string. [[OPEN ISSUE]] Should this be not limited to re-registration, and instead be used with all subsequent requests? 2.1.4. Token Refresh Before the tokens expire, the proxy makes a refresh request to the Authorization Server to try to obtain new tokens. The method used by the UA to refresh the tokens is out of scope for this document. If the proxy fails to refresh the tokens, then it MUST challenge the next request from the UA, and as a result the UA MUST go through the authorization process again. Shekh-Yusef, et al. Expires September 10, 2017 [Page 9] Internet-Draft Third-Party Authentication for SIP March 2017 2.2. Public UA with Limited UI The following figure provides a high level view of flow of messages for the user authentication using a Public UA that has a limited UI that cannot prompt the user for his credentials. This use case requires the user to use his browser to authenticate to the Authorization Server and obtain a short lived numeric authorization code that would be used by the phone to register with the SIP proxy. User Proxy Authorization Agent Server --------------------------------------------------------------------- | | | The UA collects the numeric code from the user through the key-pad| | | | | | | | F1 REGISTER [code] | | |------------------------------>| | | | | | | The proxy will then use the | | | authz code to obtain an access| | | token and refresh token | | |<----------------------------->| | | | | F2 200 OK | | |<------------------------------| | | | | 2.2.1. Registration The UA will send a REGISTER request (F1) and include the code in the body of the request with the following parameters: grant_type (REQUIRED) Value MUST be set to "authorization_code". code (REQUIRED) The code received from the authorization server through the browser. Shekh-Yusef, et al. Expires September 10, 2017 [Page 10] Internet-Draft Third-Party Authentication for SIP March 2017 The proxy then contacts the Authorization Server and exchanges the authorization code for ID token, access token, and refresh token. The method used by the UA to obtain the tokens is out of scope for this document. If the proxy is successful in exchanging the authorization code with the tokens, the proxy then responds with 200 OK (F2) to the UA to complete the registration process. 2.2.2. Shared-Key After sending the 200 OK to the UA to complete the registration process, the proxy and the UA use the HMAC-SHA256(key, message) to calculates the shared-key associated with this user as follows: key The authorization code obtained from the Authorization Server. message The concatenation of the 'from-tag', 'to-tag', and 'call-id' of the 200 OK that completes the registration process. This shared-key will be used to allow the UA to re-register to the proxy, in case of a connection lost to the proxy, without the need to obtain a new authorization code. 2.2.3. Token Refresh Before the tokens expire, the proxy makes a refresh request to the Authorization Server to try to obtain new tokens. The method used by the UA to refresh the tokens is out of scope for this document. If the proxy fails to refresh the tokens, then it MUST challenge the next request from the UA, and as a result the UA MUST go through the authorization process again. Shekh-Yusef, et al. Expires September 10, 2017 [Page 11] Internet-Draft Third-Party Authentication for SIP March 2017 2.2.4. Re-Registration Requests When the UA loses its connection to the proxy and it wants to send a new registration request to the proxy, the UA will send a new REGISTER request and include the proof-of-possession (pop) of the shared-key in the body of the request: grant_type (REQUIRED) Value MUST be set to "proof_of_possession". pop (REQUIRED) The pop calculated the first time the UA registered with the proxy. The pop is calculated using the shared-key as follows: pop = HMAC-SHA256(shared-key, digest-string) See rfc4474, section 9, for the SIP headers to hash to create digest- string. [[OPEN ISSUE]] Should this be not limited to re-registration, and instead be used with all subsequent requests? Shekh-Yusef, et al. Expires September 10, 2017 [Page 12] Internet-Draft Third-Party Authentication for SIP March 2017 3. Authentication using the Resource Owner Password Credentials flow The resource owner password credentials flow is used by a Confidential UA with rich UI to authenticate to a third-party IdP entity and to directly obtain tokens to be able to register and get service from the SIP network. 3.1. Overview The following figure provides a high level view of flow of messages for the OAuth Resource Owner Password Credentials flow: User Proxy Authorization Agent Server --------------------------------------------------------------------- | | | The UA contacts the authorization server and authenticates the | user, and as a result obtains an access and refresh tokens. | | | | |<------------------------------------------------------------->| | | | | | | | F1 REGISTER Authorization: Bearer access_token= | |------------------------------>| | | | | | | The proxy validates the token | | | Optional introspection step | | |<----------------------------->| | | | | F2 200 OK | | |<------------------------------| | | | | 3.2. Registration The UA first contacts the Authorization Server to authenticate the user and obtain tokens to be used to get access to the SIP network. The method used by the UA to obtain the tokens is out of scope for this document. Shekh-Yusef, et al. Expires September 10, 2017 [Page 13] Internet-Draft Third-Party Authentication for SIP March 2017 The UA starts the registration process with the SIP proxy by sending a REGISTER request (F1) with the access token it obtained previously. The UA includes an Authorization header field with the Bearer scheme in the request to carry the access token obtained previously. The proxy then validates the token, and MAY perform an introspection step to get more information about the token and its scope. The introspection step is out of scope for this document. When the proxy is satisfied with the token, it then replies with the 200 OK to complete the registration process. 3.3. Subsequent Requests All subsequent requests from the UA MUST include a valid access token. The UA MUST obtain a new access token before the access token expiry period to continue to get service from the system. 4. Authorization Header Syntax This section describes the syntax of the authorization header with the Bearer scheme. Authorization = "Authorization" HCOLON "Bearer" LWS "access_token" EQUAL access_token access-token = quoted-string Shekh-Yusef, et al. Expires September 10, 2017 [Page 14] Internet-Draft Third-Party Authentication for SIP March 2017 5. Security Considerations 6. IANA Considerations 7. Acknowledgments 8. Normative References [MITKB] "IdP (Identity Provider)", MIT Knowledge Base, http://kb.mit.edu/confluence/x/XoK2, March 2011. [OPENID] Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, "OpenID Connect Core 1.0", February 2014. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, H., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. [RFC6749] Hardt, D., "The OAuth 2.0 Authorization Framework", RFC 6749, October 2012. [RFC7662] Richer, J., "OAuth 2.0 Token Introspection", RFC 7662, October 2015. Authors' Addresses Rifaat Shekh-Yusef (editor) Avaya 250 Sidney Street Belleville, Ontario Canada Phone: +1-613-967-5267 EMail: rifaat.ietf@gmail.com Shekh-Yusef, et al. Expires September 10, 2017 [Page 15] Internet-Draft Third-Party Authentication for SIP March 2017 Christer Holmberg Ericsson Hirsalantie 11 Jorvas 02420 Finland EMail: christer.holmberg@ericsson.com Victor Pascual Oracle Spain EMail: victor.pascual.avila@oracle.com Shekh-Yusef, et al. Expires September 10, 2017 [Page 16]