INTERNET-DRAFT Z. Wenzel draft-wenzel-nsrc-01.txt J. Klensin expires 01/01/00 R. Bush S. Huter Network Startup Resource Center June 1999 GUIDE TO ADMINISTRATIVE PROCEDURES OF THE INTERNET INFRASTRUCTURE Status of This Memo This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF) , its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Abstract This document describes the administrative procedures for networks seeking to connect to the global Internet. This includes the steps and operations necessary for address space allocation and registration, routing database registration, and domain name registration. Where to find the required forms and instructions on how to complete them are included. Table of Contents Status of this Memo Abstract Who Should Read This Document Checklist Prerequisites 1. Preparation of Systems and Network Planning 1.1 What do I need to connect to the Internet? 1.2. What connectivity medium should I choose? 1.3 What else do I need to do? 1.4 How do I get the documents referred to in this guide? 1.5 Section References 2. Address Space Allocation 2.1 Who is my upstream provider? 2.2 How much address space should I ask for? 2.3 What is CIDR? 2.4 How do I request and register address space? 2.5 Section References 3. Autonomous Systems (AS) 3.1 What is an ASN and do I need one? 3.2 How do I register an ASN? 3.3 Section References 4. Routing and Exchange Points 4.1 Do I need to register with a routing database? 4.2 What about CIDR and routing? 4.3 How do I choose a routing database? 4.4 How do I register in the RADB (The Americas)? 4.5 Section References 5. Domain Name Registration 5.1 What is a country domain? 5.2 How do I register as a country domain? 5.3 What if my country is already registered? 5.4 How do I resolve a country domain name dispute? 5.5 Section References 6. IN-ADDR.ARPA Domain Delegation 6.1 What is an IN-ADDR.ARPA domain and do I need one? 6.2 How do I register an IN-ADDR.ARPA domain? 7. Security 7.1 Is there a way to prevent unauthorized changes to my objects? 8. Network Optimization and Management 8.1 How do I optimize traffic on my network? Acknowledgements References Authors' Addresses Appendix A: The Internet Agencies Appendix B: Documentation Appendix C: Country Codes Appendix D: Acronyms Who Should Read This Document This document is intended for system engineers and technical managers of networks that want to make a connection to the Internet. It assumes a basic knowledge of the Internet and networking. This information is intended to help new or expanding networks understand and follow the Internet administrative procedures, and to provide assistance in filling out the various templates and registration forms. Appendix D is a glossary of acronyms. Checklist This document will explain the following procedures: o Determine your organization type and current status. o Determine your administrative and technical contacts. o Determine your budget (and chargeback system) and choice of carriers. o Determine to whom you will connect. o Predict your current and projected address space needs. o Set-up your system to connect. o Request and register your address space allocation. o Request and register an autonomous system number, if needed. o Register with a routing database, if needed. o Register your country's domain name, if needed. o Request and register your IN-ADDR.ARPA domain name, if needed. Prerequisites This document assumes that you have examined different alternatives for physical connectivity and will assist you in navigating the Internet infrastructure so that you can use that connectivity. In choosing yourupstream provider, you should consider their ability to deal with the Internet infrastructure. What will you be doing and what role will you play? o If you are interested in connecting yourself (or a small organization), you are an Internet end user. You will probably want to contact an Internet Service Provider (ISP) for most of your needs. Read section 1 and the first part of section 2. o If you are interested in connecting your organization and in having address space to distribute within your network, you are an Internet high volume end user. You will need more address space, but still may chose to work with an Internet Service Provider (ISP) for most of your needs. Read sections 1 and 2. o If you are interested in connecting your organization, and in distributing addresses to your clients (who are end users), you are an Internet Service Provider (ISP). You will need to contact a Local Internet Registry (if one is available, or your upstream provider). Read section 1 and continue reading the rest of this document. o If you are interested in distributing addresses to your clients and your clients are in turn distributing addresses, you are a Local Internet Registry or large ISP. You will probably need to contact the Regional Internet Registry in your geographical area. Read section 1 and continue reading the rest of this document. 1. Preparation of Systems and Network Planning STEP ONE: PREPARE INFORMATION, ORGANIZE HARDWARE, FIGURE OUT TO WHOM YOU WILL CONNECT, AND TEST IN-COUNTRY SYSTEMS. 1.1 What do I need to connect to the Internet? You can connect using dial-up or dedicated lines, and you can choose UUCP or IP. It is preferable to be running the UNIX operating system with TCP/IP over a dedicated line, although you can begin by using UUCP over a dial-up line. Although there are alternatives to UNIX, for historical reasons and robustness UNIX is more prepared to handle Internet connectivity. It is best to use TCP/IP inside your network even if you use another method for your external connectivity. You will need to obtain an Internet Protocol (IP) address, or block of addresses, and a domain name. You may also need an Autonomous System Number (ASN) and an IN-ADDR.ARPA (reverse addressing) domain name. However, you may begin by having dial-up connectivity to another organization that has a mail exchange (MX) record for your site. This would allow you to receive email at your own domain name without requiring you to invest as much initially. 1.2 What connectivity medium should I choose? You may be constrained by telecommunications regulations in your country as to your choice of dial-up, digital phone lines, fiber optic cable, or satellite suppliers. If not, cost, bandwidth, and reliability will determine your choice. 1.3 What else do I need to do? Before you do anything else: o Designate an administrative contact person and a technical contact person. Choose one person to be the administrative contact and another person to be the technical contact. Write down their full names, email and postal addresses, and telephone and fax numbers (with country prefixes in the form + country code (e.g., +011), city code, and local telephone number). The administrative contact should be a member of your organization and must reside in the country. The technical contact should be the key network support person and may be represented initially by someone outside of the country. Note that the technical contact must transition to a network support person residing in the country. The Internet Registries will request this information in the form of database entries called objects. For example, on the RIPE template, the administrative contact should be listed in the admin-c field in the database objects, and the technical contact in the tech-c field in the database objects (more information on database objects follows in section 2.4 below). o Determine your cost-recovery charging scheme, if needed, so that you can sustain operations. No form or record will specifically request this, but it is important that you project your costs adequately so that you can assess fees to cover them and ensure stability of operations. o Diagram your network topology. Determine the number of groups and end users. Describe the size and shape of your current network. Design your addressing plan based on this information. It may be helpful to consider your organization chart when doing this, if you anticipate it to be fairly stable. If you are restricted to using the local telecommunications companys telephone circuit, choose your circuit carrier based on capacity and where it lands geographically. Consider an asymmetric circuit, e.g. 128kbps in and 64kbps out, if you expect to have more incoming traffic than outgoing (e.g., if most of the traffic is expected to originate from web servers outside your network). o Determine to whom you will connect. See the prerequisites section for types of connection providers that might be appropriate for your situation. Determine which ISP or telecommunications company best fits your connectivity needs. o Predict your address space and bandwidth requirements from end user needs. Since address space is finite and must be conserved, end users are not permitted to reserve address space. Address space is based on what your needs are and how you justify those needs. Evaluation of IP address space requests is usually based on the documentation you provide for the following 24 months (as per RFC 2050), as specified in the address space usage template and in the addressing plan you submit. Once you have used your assigned address space, you can request additional space based on an updated estimate of growth in your network. This usually includes detailed documentation, updating the appropriate regional registry database with details of your end user assignments, and assigning address space both conservatively and efficiently. You will need to justify your needs for address space by communicating your network design and should be prepared to clearly present your plan for effective use of the request. Determine your current and future user needs. If you are offering virtual web services, it is no longer necessary to assign one IP address per domain. HTTP/1.1 defines the "host" head to allow vanity names without the use of an IP address. Allocations for points of presence (POP) throughout your region should also be determined. Predictions of user behavior can be based on analysis of published rates, interviews with individual and institutional subscribers, and case histories of other countries (see "History of the Internet in Thailand"). For example, Area1 10 dialup modems 10 leased lines to organizations LANs (size of the LANs) Area2 5 dialup modems Main POP 5 servers: mail, WWW, DNS, FTP, etc. When you design your plan, you should do it for what you need now, what you believe you will need six months from now, and then one year and two years from now. o Set up, connect, and test your hardware and software. It is important to ensure that you have enough representative systems set up and their connectivity tested using temporary addresses before contacting the appropriate agency for address space. 1.4 How do I get the documents referred to in this guide? See Appendix B for details on obtaining the documents referred to in this guide. 1.5 Section References For more information on TCP/IP, see RFC 2151, "A Primer on Internet and TCP/IP Tools and Utilities." 2. Address Space Allocation STEP TWO: OBTAIN ADDRESS SPACE ALLOCATION AND REGISTRATION FROM THE ISP YOU ARE CONNECTING TO, OR (AS A LAST RESORT) YOUR REGIONAL REGISTRY. Internet Protocol (IP) addresses (under the current version 4) are 32-bit numbers usually expressed as 4 octets in dotted decimal notation (for example, 128.223.162.27, which is the IP address for the Network Startup Resource Center (NSRC) web server). Public IP addresses make up the Internet address space. Addresses are allocated in a hierarchical manner and are designed to be unique. The Internet Assigned Numbers Authority (IANA) allocates large address blocks to the three current Regional Internet Registries (IRs): ARIN, APNIC, and RIPE NCC which, in turn, allocate smaller blocks to Local Internet Registries or large ISPs. Local Internet Registries, which are typically ISPs or collections of ISPs represented at a country level, and large ISPs process the vast majority of address space assignments to ISPs and end users Contact the Internet service provider from whom you are getting your connectivity services (your upstream provider) with an address allocation request. It is important and required that you contact your upstream provider first, and not the Regional IR automatically. The first question the Regional Registry will ask you is why you cannot get address space from your upstream provider. 2.1 Who is my upstream provider? If there is an ISP already functioning in your country, contact them directly. If you are to be the first connection in your country, you may need to contact your Regional IR in your geographic region, but you should always contact your upstream provider first for assistance and guidance. Since address allocation is hierarchical, the administrative organizations and procedures also represent this hierarchical structure. It is important not to skip a step in the hierarchy. Current Regional Registries include ARIN (the Americas, Caribbean, and Africa), RIPE (Europe, Africa, and the Middle East), and APNIC (the Pacific Rim and Asia). Contact information for these organizations is listed in Appendix A. You should contact your Regional Internet Registry if 1) the ISP you are connecting to is unable or unwilling to provide address space, or 2) your particular connectivity requirements will result in non-local data to your customers possibly taking a different route over the Internet than data destined for your upstream providers customers, or 3) you anticipate a quick growth rate that may require changing your current upstream provider to a larger one and you wish to avoid the renumbering that such a move would require. 2.2 How much address space should I ask for? Regional IRs typically assign address blocks on the basis of an immediate need and projected utilization rate within one year. (If you are in the ARIN region, it is one year for end user organizations and three months for ISPs.) Calculate your address space request accordingly. It is recommended to include the organization chart and network topology diagram referred to in section 1.3, third bullet (above). Note that address space is allocated based on CIDR bit boundaries (see next section). The registries will need to understand your network engineering and deployment plans in significant detail before they can allocate address space. Therefore, the more detailed information you can provide, the more likely your request will be processed quickly. If you obtain address space from your ISP, it is very likely that you will need to renumber should you decide to change upstream providers and/or if you grow considerably. As this renumbering may affect your customers (and their customers, etc.) if they are using dedicated lines, you should carefully weigh the cost/benefit involved in obtaining address space from your upstream provider. If you are singly homed, you should obtain your address space from your upstream ISP. If you plan on enlarging but remaining singly homed, you should continue to obtain space this way as it promotes aggregation. If , however, you plan to be multi-homed as part of your growth plan, it would make sense to become a member of an appropriate Regional IR (or, if one exists in your region, a national Network Information Center (NIC) and obtain a /19 or "provider aggregatable" address space. The minimum routable block is often a /19, so if you plan on enlarging, it is better to pay the fees to the Regional IR now and obtain a /19 block so that you will not have to renumber later. Note that if you are an ISP in the ARIN region, ARIN has special requirements before you can do this, in terms of the amount of address space you have previously used, which must be a /21. The current policy is that you must have used a /19 previously from your upstream ISP before going to ARIN. Or you must be multi-homed and show you have used a /21 and be willing to renumber and ARIN will issue a /20 from a reserved /19. As of February 8, 1999, ARIN lowered the minimum allocation size for IP addresses from a /19 to a /20. ARIN will issue initial allocations of prefixes no longer than /20. If allocations smaller than /20 are needed, ISPs and end users should request address space from their upstream provider. ARIN does not guarantee that addresses will be globally routable. APNIC and RIPE NCC do not have these requirements. For APNIC, new allocations to members will be a /19. Remember that your upstream provider should route you if you ask them. You are a customer of the ISP, so if the service is not what you need you should change ISPs. IF YOU ARE CONNECTED TO ONLY ONE PROVIDER, AND ARE NOT VERY LARGE YET, GET AN ADDRESS RANGE FROM YOUR PROVIDER. SKIP THE REST OF THIS SECTION AND ALL OF SECTION 5. 2.3 What is CIDR? CIDR stands for Classless Inter-Domain Routing. Historically, IP addresses were assigned within classes: Class A (8 bits of network address, 24 bits of host address), Class B (16 bits of network address, 16 bits of host address), or Class C (24 bits of network address, 8 bits of host address). With the advent of CIDR, address space is now allocated and assigned on bit boundaries. Using CIDR means you are able to assign addresses corresponding with the number of hosts on the network, thereby conserving address space. The following table illustrates this: Addrs Bits Pref Class Mask 1 0 /32 255.255.255.255 2 1 /31 255.255.255.254 4 2 /30 255.255.255.252 8 3 /29 255.255.255.248 16 4 /28 255.255.255.240 32 5 /27 255.255.255.224 64 6 /26 255.255.255.192 128 7 /25 255.255.255.128 256 8 /24 1C 255.255.255.0 512 9 /23 2C 255.255.254.0 1K 10 /22 4C 255.255.252.0 2K 11 /21 8C 255.255.248.0 4K 12 /20 16C 255.255.240.0 8K 13 /19 32C 255.255.224.0 Addrs Number of addresses available; note that the number of addressable hosts normally is 2 less than this number because the host parts with all equal bits (all 0s, all 1s) are reserved. Bits Size of the allocation/assignment in bits of address space. Pref Length of the prefix covering this address space. This is sometimes used to indicate the size of an allocation/assignment. Class Size of the address space in terms of class C network numbers. Mask The network mask defining the routing prefix in dotted quad notation. (From http://www.ibm.net.il/~hank/cidr.html) 2.4 How do I request and register address space? You will need to send a database object to the appropriate registry to request and register address space. The registration databases are composed of records that are a series of fields separated by one or more blank lines; each field consists of two parts, the tag and the value. Do not modify the tags in the templates or errors will occur. Values for particular fields are specified in the templates; be careful to enter appropriate information. The first line of a template denotes the record type. For example, an IP address template's first line is inetnum, therefore the record is known as an inetnum object. This first line is also used as the primary key for the record, therefore if you want to modify the first field of the record, the only way to do so is to delete the record entirely and add a new record with the corrected information. For illustration, here is the RIPE inetnum object. inetnum: [IP address range that will be assigned] netname: Network-Name descr: Network-Name Communications Company, Town admin-c: NIC-handle of administrative contact tech-c: NIC-handle of technical contact country: ISO 3166-country-code rev-srv: ns.someserver.net rev-srv: ns.otherserver.net status: assigned pa (provider aggregatable) or assigned pi (provider independent) changed: email@address.net 960731 source: RIPE For Countries in the APNIC Region In order to obtain services from APNIC, you will need to become a member. APNIC-070 is the APNIC Membership Application. It is located at: ftp://ftp.apnic.net/apnic/docs/membership-application Send the completed form via email to APNIC at: member-apply@apnic.net APNIC Address Allocation Requests: Once you have become a member, you can request IP address space using one of the three IP address request forms. If you are an organization that will use address space internally only (e.g., large enterprises such as universities, government ministries, large corporations, etc.), choose the first option (End User Address Request). If you are an organization that plans to sub-delegate address space to customers (e.g., you are an ISP), choose the second option (ISP Address Request). If you are a confederation of ISPs (e.g., national NICs, etc.), choose the third option (Confederation Address Request). o APNIC-074 is the APNIC End User Internet Address Request Form. o APNIC-065 is the APNIC Internet Services Provider Internet Address Request Form. o Confederations are a means by which service providers can group together to provide resource allocation and registration services tailored to their specific local language and cultural requirements. For details on how to become an APNIC recognized confederation, please see APNIC Confederation Concepts and Requirements located at: ftp://ftp.apnic.net/apnic/docs/confed-requirements APNIC-074 is the APNIC Confederation Internet Address Request Form. Copies of all forms can be found in the following directory: ftp://ftp.apnic.net/apnic/docs or http://www.apnic.net/reg.html All completed forms should be sent to: hostmaster@apnic.net If there are strong reasons why you cannot obtain address space from your upstream ISP, and you require address space as a one-time allocation only, you can obtain address space as a "non member." For more details, see APNIC-071: http://ftp.apnic.net/apnic/docs/non-member-application and send the completed form to: billing@apnic.net For Countries in the ARIN Region Membership in ARIN is optional and not a requirement for requesting IP address space from the registry or from your Internet service provider. If you are a large end user organization, choose the first option. If you are an ISP, choose the second. o The form for network number assignments is located at: ftp://rs.arin.net/templates/networktemplate.txt or http://www.arin.net/templates/networktemplate.txt o The form for ISPs to obtain a CIDR block of IP network numbers is located at: ftp://rs.arin.net/templates/isptemplate.txt or http://www.arin.net/templates/isptemplate.txt Send either completed form via email to ARIN at: hostmaster@arin.net with "IP request" (if you chose the first option) or "ISP CIDR request" (if you chose the second) in the subject field, as appropriate. For Countries in the RIPE Region RIPE NCC provides IP address space allocation only to contributing local Internet registries. For a description of the European Internet Registry policies and procedures, see RIPE-159, "European Internet Registry Policies and Procedures." It is located at: ftp://ftp.ripe.net/ripe/docs/ripe-159.txt RIPE-160 is Guidelines for Setting up a Local Internet Registry. It is located at: ftp://ftp.ripe.net/docs/ripe-160.txt If you have questions regarding setting up a new local IR, please contact the RIPE NCC at: new-lir@ripe.net Once your local IR is established, you will get detailed information on how to submit requests to the RIPE NCC hostmasters. Send the completed form via email to RIPE NCC at: ncc@ripe.net If you have general queries, please contact RIPE NCC at: ncc@ripe.net 2.5 Section References For more information on IP addresses, see RFC 1518, "An Architecture for IP Address Allocation with CIDR" and RFC 2050, "Internet Registry IP Allocation Guidelines." 3. Autonomous Systems (AS) STEP THREE: IF NEEDED, OBTAIN AN AUTONOMOUS SYSTEM NUMBER. 3.1 What is an ASN and do I need one? Autonomous System Numbers (ASNs) are used to facilitate routing in multi-homed environments. They are allocated when your routing policy is different from your providers. This generally means your site is multi-homed. In nearly all cases, unless you are multi-homed to more than one ISP, you will not need an ASN. If your routing policy does not differ from your service providers, you should use the service providers ASN. If there is constant traffic between you and a point in another country, you may want to connect to a second ISP in that country. Note that the resultant multi-homing generally makes the system more robust and may also change registry (and therefore request) relationships. It also increases costs greatly. You may have to reduce traffic on your international lines by choosing to connect to a local exchange point. This allows traffic to stay within your country and off of expensive international links. If you implement this plan, you will be multi-homed and will need to read the autonomous systems and routing sections of this document. 3.2 How do I register an ASN? Since the ASN space is quite limited, request only what you really need when you need it. For Countries in the APNIC Region APNIC-066 is the ASN Request Form. The form is located at: http://ftp.apnic.net/apnic/docs/asn-request Send the completed form via email to APNIC at: hostmaster@apnic.net For Countries in the ARIN Region A complete listing of assigned ASNs is located at: ftp://rs.arin.net/netinfo/asn.txt The ASN registration form is located at: ftp://rs.arin.net/templates/asntemplate.txt or http://www.arin.net/templates/asntemplate.txt Send the completed form via email to ARIN at: hostmaster@arin.net with "ASN request" in the subject field. For Countries in the RIPE Region The European Autonomous System Number Application Form and Supporting Notes form (RIPE-147) is located at: ftp://ftp.ripe.net/ripe/docs/ripe-147.txt Local IRs can send the completed form via email to RIPE at: hostmaster@ripe.net 3.3 Section References For more information on ASNs, see RFC 1930, "Autonomous Systems (AS)." 4. Routing and Exchange Points STEP FOUR: IF NEEDED, REGISTER WITH A ROUTING DATABASE. 4.1 Do I need to register with a routing database? You do not need to register with a routing database if you are simply carrying default routes to your (single) ISP. If you get your address space from an ISP, the ISP will register you. If you are connected to more than one ISP, then you should register with a routing database. The more multi-homed you are, the larger your routing tables need to be. If you are connected to public exchange points (see examples below), or to more than one backbone ISP, you need to carry full routing tables and run without a default route. Example European Exchange Points: LINX London Internet Exchange M9-IX Moscow Internet Exchange NIX.CZ Neutral Internet Exchange, Czech Republic Example Asia/Pacific Exchange Points: AUIX Australia Internet Exchange HKIX Hong Kong Internet Exchange JPIX Japan Internet Exchange Example Americas Exchange Points: MAE-EAST Metropolitan Area Ethernet - East MAE-WEST Metropolitan Area Ethernet - West PAIX Palo Alto Internet Exchange Depending on the requirements of your international ISP, you may be able to have only a default route to them and specific routes to other suppliers if you have an in-country exchange point. Or they may require that you carry a full set of routes, treating your connection to the in-country exchange point as if it were a multi-homed connection. 4.2 What about CIDR and routing? All registries use CIDR. All major router vendors (Cisco, 3com, Bay, Proteon, IBM, etc) support CIDR. CIDR Internet routers use only the prefix of the destination address to route traffic to a subnetted environment. 4.3 How do I choose a routing database? The Internet Routing Registry (IRR) describes registries maintained by several national and international networking organizations. These currently include the RIPE Network Coordination Centre (NCC), ANS (Advanced Network Solutions, Inc.), InternetMCI, Bell Canada (formerly CA*net), and the Routing Arbiter Database (RADB). The IRR is a way for ASNs to publicize their own intended routing policies without having to request a change from a go-between. The client configures the precedence of routing databases. For example, @RtConfig set sources = "TEST, RADB, MCI, RIPE, ANS, CANET" In addition, RADB whois gives answers for all registries. Tool client access gives RADB data only. With the exception of the Routing Arbiter Database, each registry serves a limited customer base. ANS, InternetMCI, and Bell Canada accept routing registrations for their customers alone, and the RIPE NCC oversees European registrations. The Routing Arbiter Database is unique in that it handles registrations for networking organizations not covered by the other routing registries. The Routing Arbiter also provides coordination among all the registries to ensure consistent representation of routing policies. All Regional IRs need to register with one (only one) of the routing databases in the IRR. If you are announcing routes via BGP4, you need to register your routes in the Routing Registry in only one of the IRRs. Logically, this will be the "closest" IRR to you. However, note that some ISPs do not use the regional registries or RADB. 4.4 How do I register in the RADB (The Americas)? You need to submit three types of database records to the RADB: one or more maintainer objects, an AS object, and one or more route objects. To specify the individuals who are allowed to update your records in the RADB, fill out one or more maintainer objects and send them via email to: db-admin@ra.net You need to submit a maintainer object before you can register any AS or route objects. To describe the autonomous system that announces your routes, fill out an AS object and submit it via email to: auto-dbm@ra.net AS objects are also called aut-num objects. To register your routes, fill out one or more route objects, and send them to RADB via email to: auto-dbm@ra.net Note that most of the IRR participants have the auto-dbm@xx.net email address function for accepting updates to the IRR automatically. 4.5 Section References For more information on routers, see RFC 1812, "Requirements for IP Version 4 Routers. "See also RFC 1786, "Representation of IP Routing Policies in a Routing Registry (ripe-81++)." For more information on CIDR and routing, see RFC 1817, "CIDR and Classful Routing." 5. Domain Name Registration STEP FIVE: REGISTER YOUR DOMAIN NAME. 5.1 What is a country domain? The Domain Name System (DNS) specifies the naming of computers within a hierarchy. Top-Level Domain names (TLD) include generic TLDs (gTLDs) and two- letter country codes (ccTLDs). Examples of gTLDs include .edu (education), .com (commercial), .int (international), .org (organization), and .net (network). Examples of two-letter country codes are .id for Indonesia, .ca for Canada, and .fr for France. ISO 3166 is used as a basis for country code top- level domain names. Country codes are determined by the International Organization for Standardization (ISO) in cooperation with the United Nations. The Internet Assigned Numbers Authority (IANA) directly registers all country- code top-level domains, however it is not involved in the dermination of country status. See ISO 3166 for more information and a listing of country codes (Appendix C). A hierarchy of names may, and normally should be, created under each TLD. There is a wide variation in the structure of country domains. In some countries the structure is very flat, while in others there is substantial organization. In some country domains the second levels are generic categories, while in others they are based on political geography, and in still others, organization names are listed directly under the country code. Examples of second level generic categories are .ac (academic), .co (corporate), .go (government), and .re (research). 5.2 How do I register as a country domain? First check that: (1) the domain is still available, (2) you have someone in your country as the administrative contact, and (3) your name servers are prepared (see RFC 1912 for information on common errors in preparing name servers). The whois database maintained by InterNIC Registration Services (Network Solutions, Inc.) is currently the authoritative source for .com, .net, .org, and .edu domain name information. ccTLDs may also be checked in the InterNIC database by using the command whois. To apply to manage a country code top-level domain you should: o First, if you are on a UNIX host, use the whois command to see if the domain is already registered: whois o If the domain does not already have an administrative contact, request a Domain Name Agreement template from IANA by sending email to: iana@iana.org 5.3. What if my country is already registered? If your country is already registered, contact the country-code administrator to register a new second-level domain name. Please note that ARIN, RIPE, and APNIC do not handle domain names (other than IN-ADDR.ARPA). If you want to register a domain name directly under a top-level domain (TLD), please contact the appropriate TLD administrator. 5.4. How do I resolve a country domain name dispute? See RFC 1591 for domain name dispute information. Note that you will need to resolve the dispute within your country before you contact IANA. 5.5 Section References For more information on domain names, see RFC 1591, "Domain Name System Structure and Delegation"; RFC 1713, "Tools for DNS Debugging"; and RFC 1912, "Common DNS Operational and Configuration Errors." 6. IN-ADDR.ARPA Domain Delegation STEP SIX: IF NEEDED, REGISTER YOUR IN-ADDR.ARPA DOMAIN. 6.1 What is an IN-ADDR.ARPA domain and do I need one? An IN-ADDR.ARPA domain allows for mapping of IP addresses into domain names. This is often referred to as "inverse addressing" because it is the opposite of the domain name to IP address resolution. IN-ADDR domains are represented using the network number in reverse. For example, the IN-ADDR domain for network 123.45.67.0 is represented as 67.45.123.in-addr.arpa. You almost always need reverse resolution. 6.2 How do I register an IN-ADDR.ARPA domain? You should ask your upstream provider about registering your IN-ADDR.ARPA domains. If you are working directly with a regional registry, see below. For Countries in the APNIC Region The IN-ADDR.ARPA Delegation Form is APNIC-064 and is located at: ftp://ftp.apnic.net/apnic/docs/in-addr-request CAUTION: You must set-up your name server to accept the delegation prior to submission of this form. Send the completed form via email to APNIC at: domreg@rs.apnic.net For Countries in the ARIN Region How IN-ADDR.ARPA is registered is dependent on the registration of the block needing reverse entries. For example, all blocks that have been registered directly from the Regional IR may have IN-ADDR.ARPA delegation established by ARIN. In this case, IN-ADDR.ARPA delegations are registered using the ARIN modify template. This template can be found at: ftp://ftp.arin.net/templates/modifytemplate.txt or http://www.arin.net/templates/modifytemplate.txt Instructions for completing the template can be found at the bottom of the template. CAUTION: Do not list your network number in reverse on the template. Send the completed form via email to ARIN at: hostmaster@arin.net All blocks that have been reassigned to your organization by an ISP will have IN-ADDR.ARPA established by your provider. In this case, contact the ISP that reassigned IP address space to your organization and coordinate IN-ADDR.ARPA delegation. For Countries in the RIPE Region The domain object needs to be entered in the RIPE database before requesting reverse delegation. domain: 0.194.in-addr.arpa descr: Our organization allocation admin-c: NIC-handle of administrative contact (e.g., JLC-2RIPE) tech-c: NIC-handle of technical contact zone-c: NIC-handle of zone contact nserver: Name server (e.g., ns.someserver.net) nserver: ns.otherserver.net nserver: ns.ripe.net changed: email@address.net 960731 source: RIPE NOTE: One of the name servers has to be ns.ripe.net The domain object described above should be included in the request, as well as zone file entries for the zone above the one requested. For example, if a reverse delegation is requested for 1.193.in-addr.arpa, the relevant zone file entries should be included for 193.in-addr.arpa; whereas if a reverse delegation is requested for 2.2.193.in-addr.arpa, the zone file entries should be included for 2.193.in-addr.arpa. Send the completed object(s) via email to RIPE at: auto-inaddr@ripe.net 7. Security 7.1 Is there a way to prevent unauthorized changes to my objects? Registries provide various security measures to prevent unauthorized changes to your database entries. Contact your regional IR for more information. Note that the contact information you provide in the database object registrations is not private. 8. Network Optimization and Management 8.1 How do I optimize traffic on my network? Contact the Cooperative Association for Internet Data Analysis (CAIDA). CAIDA is a collaborative undertaking to promote greater cooperation in the engineering and maintenance of a robust, scalable global Internet infrastructure. CAIDA provides a neutral framework to support these cooperative endeavors. The CAIDA web-site is located at: http://www.caida.org/ Send email with questions or comments to: info@caida.org Acknowledgements Thanks to Brian Candler, David Conrad, Kim Hubbard, Daniel Karrenberg, Anne Lord, Dawn Martin, Charles Musisi, Jon Postel, and April Marine and the User Services Working Group for reviewing this document; and to Hank Nussbacher for permission to reprint his table on CIDR References [1] Malkin, G., and T. LaQuey Parker, "Internet Users' Glossaary", RFC 1392, January 1993. [2] Hinden, R., Editor, "Applicability Statement for the Implementation of Classless Inter-Domain Routing (CIDR)", RFC 1517, September 1993. [3] Rekhter, Y. and T. Li, "An Architecture for IP Address Allocation with CIDR", RFC 1518, September 1993. [4] Fuller, V., Li, T., Yu, J., and K. Varadhan, "Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy", RFC 1519, September 1993. [5] Rekhter, Y. and C. Topolcic, "Exchanging Routing Information Across Provider Boundaries in the CIDR Environment", RFC 1520, September 1993. [6] Postel, J. "Domain Name System Structure and Delegation", RFC 1591, March 1994. [7] Wijnen, B., Carpenter, G., Curran, K., Sehgal, A. and G. Waters, "Simple Network Management Protocol Distributed Protocol Interface Version 2.0., RFC 1592, March 1994. [8] Ramao, A. "Tools for DNS Debugging", RFC 1713, November 1994. [9] Baker, F. "Requirements for IP Version 4 Routers", RFC 1812, June 1995. [10] Rekhter, Y. "CIDR and Classful Routing", RFC 1817, August 1995. [11] Barr, D. "Common DNS Operational and Configuration Errors", RFC 1912, February 1996. [12] Hawkinson, J. and T. Bates, "Guidelines for Creation, Selection, and Registration of an Autonomous System", RFC 1930, March 1996. [13] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996. [14] Hubbard, K., Kosters, M., Conrad, D., Karrenberg, D., and J. Postel, "Internet Registry IP Allocation Guidelines", RFC 2050, November 1996. [15] Kessler, G. and S. Shepard, "A Primer On Internet and TCP/IP Tools and Utilities", RFC 2151, June 1997. [16] ISO 3166: "Codes for the Representation of Names of Countries". [17] Palasri, S., Huter, S., and Z. Wenzel, "The History of the Internet in Thailand", University of Oregon Books, 1999. Authors' Addresses Zita Wenzel, Ph.D. Network Startup Resource Center (NSRC) 1225 Kincaid Street 1212-University of Oregon Eugene, OR 97403-1212 USA zita@nsrc.org John Klensin, Ph.D. Network Startup Resource Center (NSRC) 1225 Kincaid Street 1212-University of Oregon Eugene, OR 97403-1212 USA klensin@nsrc.org Randy Bush Network Startup Resource Center (NSRC) 1225 Kincaid Street 1212-University of Oregon Eugene, OR 97403-1212 USA randy@nsrc.org Steven Huter Network Startup Resource Center (NSRC) 1225 Kincaid Street 1212-University of Oregon Eugene, OR 97403-1212 USA sghuter@nsrc.org APPENDIX A: The Internet Agencies o The Internet Assigned Numbers Authority (IANA) IANA is the central coordinator for the assignment of unique parameter values for Internet protocols and for all address space and name space used in the Internet. IANA allocates parts of the Internet address space to Regional Internet Registries (IRs) for distribution to Local IRs and ISPs. IANA is also responsible for the coordination and management of the Domain Name System (DNS). Email: iana@iana.org Postal: P. O. Box 12607 Marina del Rey, CA 90295-3607 Telephone: +1-310-822-1511 Fax: +1-310-823-6714 Internet: http://www.iana.org/ o InterNIC The InterNIC was a cooperative activity between the National Science Foundation, General Atomics, AT&T, and Network Solutions, Inc. Network Solutions provided IP address allocation before ARIN was founded. Currently, InterNIC registers second-level domain names under the generic top-level domains. Email: hostmaster@internic.net Postal: Network Solutions, Inc. ATTN: InterNIC Registration Services 505 Huntmar Park Dr. Herndon, VA 20170 US Telephone: +1-703-742-4777 Fax: +1-703-742-9552 Internet: http://www.internic.net/ Regional Internet Registries (IRs) Regional IRs operate in large geopolitical regions such as continents. Currently, there are three Regional IRs: ARIN for the Americas, the Caribbean, and Africa; RIPE NCC for Europe, Africa, and the Middle East; and APNIC for the Asia Pacific region. The specific duties of the Regional IRs include coordination and representation of all local Internet Registries in their respective region. o APNIC Asia Pacific Network Information Center (APNIC) is a non-profit Internet rregistry for the Asia Pacific region. APNIC provides IP address allocation, Autonomous System Number (ASN) assignment, and IN-ADDR.ARPA registration. Email: hostmaster@apnic.net Postal: APNIC Box 2131 Milton Queensland 4064 Australia Telephone: +61-7-3367-0490 Fax: +61-7-3367-0482 Internet: http://www.apnic.net/ o ARIN The American Registry for Internet Numbers (ARIN) is a non-profit Internet registry that was established for the purpose of administration and registration of Internet Protocol (IP) numbers to the geographical areas that were previously managed by Network Solutions, Inc. (InterNIC). These areas include, but are not limited to, North America, South America, Africa, and the Caribbean region. ARIN provides IP address allocation, Autonomous System Number (ASN) assignment, and IN-ADDR.ARPA registration. Email: hostmaster@arin.net Postal: 4506 Daly Drive Suite 200 Chantilly, VA 20151 Telephone: +1-703-227-0660 Fax +1-703-227-0676 Internet: http://www.arin.net/ o RIPE NCC Reseaux IP Europens Network Coordination Centre (RIPE NCC) is a non-profit Internet registry for the European, North African, and Middle East regions. RIPE NCC provides IP address allocation, Autonomous System Number (ASN) assignment, and IN-ADDR.ARPA registration. Email: ncc@ripe.net Postal: Singel 258 1016 AB Amsterdam The Netherlands Phone: +31-20-535-4444 Fax: +31-20-535-4445 Internet: http://www.ripe.net/ APPENDIX B: Documentation Internet Documentation For general Internet documentation, ftp to rfc-editor.org and cd to the /rfc subdirectory for Request for Comments documents. Details on obtaining these documents via ftp or email may be obtained by sending an email message to: rfc-info@rfc-editor.org with the message body help: ways_to_get_rfcs. For example: To: rfc-info@isi.edu Subject: getting rfcs help: ways_to_get_rfcs Documents, Templates, and Forms The documents, templates, and forms referenced in this guide are available from the document stores in the directories listed in the URLs (Uniform Resource Locators). Organizations without connectivity wishing to obtain copies of the referenced documents should contact their Local IR to arrange postal delivery of one or more of the documents. Note that fees may be associated with the delivery of hardcopy versions of documents. The document stores can be accessed in two ways: o Via anonymous FTP (File Transfer Protocol). Using your ftp program, connect to the appropriate host computer shown below using your email address as the password. Use the cd (change directory) command to connect to the appropriate subdirectory, then use the get command to retrieve the specific file. For example: ftp rs.apnic.net (for countries in the Asia/Pacific region) ftp rs.arin.net (for countries in the Americas) ftp rs.ripe.net (for countries in Europe or North Africa) login: anonymous password: your_email_address cd netinfo get _info.txt o Via electronic mail, ftp, or the World Wide Web Send email to the appropriate address shown below with the message body as specified. APNIC Documentation For APNIC documents and templates, connect to ftp.apnic.net and cd to /apnic/docs. APNIC no longer has an electronic mail method of form retrieval. Many of APNIC's request forms are also available on the web site at: http://www.apnic.net/reg.html ARIN Documentation For ARIN templates, connect to rs.arin.net and cd to /templates. You can also obtain templates via the web site at: http://www.arin.net/templates.html Other ARIN documentation is available at: http://www.arin.net/docs.html Or send email to: hostmaster@arin.net RIPE Documentation For RIPE documents and forms, connect to ftp.ripe.net/ripe and cd to /docs or cd to /forms. Or send email to: mail-server@ripe.net with send help in the body of the message. APPENDIX C: Country Codes The ISO 3166 list of two-letter country codes is available at: http://www.iana.org/country-codes.txt The International Organization for Standardization (ISO) 3166 Maintenance Agency is: http://www.iso.ch/infoe/agency/3166-1.htm The list is also available at: ftp://ftp.apnic.net/apnic/docs/iso-3166.txt and ftp://ftp.ripe.net/iso3166-countrycodes APPENDIX D: Acronyms ANS Advanced Network Services, Inc. ASN Autonomous System Number APNIC Asia Pacific Network Information Center ARIN American Registry for Internet Numbers AS Autonomous System CANET Canada Net CIDR Classless Inter-Domain Routing DNS Domain Name System gTLD Generic Top-Level Domain IANA Internet Assigned Numbers Authority InterNIC Internet Network Information Center IP Internet Protocol IR Internet Registry IRR Internet Routing Registry ISO International Organization for Standardization ISP Internet Service Provider LINX London Internet Exchange NCC Network Coordination Centre NIC Network Information Center NSRC Network Startup Resource Center POP Point of Presence RADB Routing Arbiter Data Base RFC Request for Comments RIPE Reseaux IP Europiens TCP/IP Transmission Control Protocol/Internet Protocol TLD Top-Level Domain draft-wenzel-nsrc-01.txt expires 01/01/00