Network Working Group J. Uttaro Internet-Draft AT&T Intended status: Standards Track A. Simpson Expires: September 10, 2012 Alcatel-Lucent R. Shakir C&W C. Filsfils P. Mohapatra Cisco Systems B. Decraene France Telecom J. Scudder Y. Rekhter Juniper Networks March 9, 2012 BGP Persistence draft-uttaro-idr-bgp-persistence-01 Abstract For certain AFI/SAFI combinations it is desirable that a BGP speaker be able to retain routing state learned over a session that has terminated. By maintaining routing state forwarding may be preserved. This technique works effectively as long as the AFI/SAFI is primarily used to realize services that do not depend on exchanging BGP routing state with peers or customers. There may be exceptions based upon the amount and frequency of route exchange that allow for this technique. Generally the BGP protocol tightly couples the viability of a session and the routing state that is learned over it. This is driven by the history of the protocol and it's application in the internet space as a vehicle to exchange routing state between administrative authorities. This document addresses new services whose requirements for persistence diverge from the Internet routing point of view. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months Uttaro, et al. Expires September 10, 2012 [Page 1] Internet-Draft BGP Persistence March 2012 and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on September 10, 2012. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Uttaro, et al. Expires September 10, 2012 [Page 2] Internet-Draft BGP Persistence March 2012 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. BGP Graceful Restart and BGP persistence targets different use cases . . . . . . . . . . . . . . . . . . . 4 1.2. Requirements Language . . . . . . . . . . . . . . . . . . 5 2. Communities . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1. DO_NOT_PERSIST . . . . . . . . . . . . . . . . . . . . . . 6 2.2. STALE . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. Configuration (Persistence Timer and DO_NOT_PERSIST Community) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.1. Settings for Different Applications . . . . . . . . . . . 7 4. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.1. BGP session failure . . . . . . . . . . . . . . . . . . . 8 4.1.1. Attaching the STALE Community Value and Propagation of Paths . . . . . . . . . . . . . . . . . 8 4.1.2. Lower route preference . . . . . . . . . . . . . . . . 8 4.2. Forwarding . . . . . . . . . . . . . . . . . . . . . . . . 9 4.3. BGP session re-establishement . . . . . . . . . . . . . . 9 5. Deployment Considerations . . . . . . . . . . . . . . . . . . 10 6. Applications . . . . . . . . . . . . . . . . . . . . . . . . . 11 6.1. Persistence in L2VPN (VPLS/VPWS) . . . . . . . . . . . . . 11 6.2. Persistence in L3VPN . . . . . . . . . . . . . . . . . . . 12 7. Interactions between GR and Persistence . . . . . . . . . . . 15 8. Security Considerations . . . . . . . . . . . . . . . . . . . 17 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 19 10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 20 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21 11.1. Normative References . . . . . . . . . . . . . . . . . . . 21 11.2. Informative References . . . . . . . . . . . . . . . . . . 21 Appendix A. Appendix A. Changes / Author Notes . . . . . . . . . 22 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 23 Uttaro, et al. Expires September 10, 2012 [Page 3] Internet-Draft BGP Persistence March 2012 1. Introduction In certain scenarios, a BGP speaker may maintain forwarding in spite of BGP session termination. Currently all routing state learned between two speakers is flushed upon either normal or abnormal session termination. There are techniques that are useful for maintaining routing when a session abnormally terminates i.e BGR Graceful RestartR ( RFC 4724 ) or normal termination such as increasing timers but they do not change the fundamental problem. The technique of BGP persistence works effectively as long as the expectation is that there is a decoupling of session viability and the correct service delivery, and the delivery uses the routing state learned over that session. This document proposes a modification to BGP's behavior by enabling persistence of BGP learned routing state in spite of normal or abnormal session termination. 1.1. BGP Graceful Restart and BGP persistence targets different use cases BGP Graceful Restart as defined in [RFC4724] solve the requirement of a control plane restart. As such the fundamental assumption is that the control plane is to go back quickly (e.g. minutes) and that the failure does not need to be advertised in the network thus avoiding churn. Hence there is an opportunity to locally recover from a control plane only failure without affecting the whole network. In the worst case where reality turns to be different from the assumption and that this is not only a control plane failure but also a the forwarding plane failure, the traffic may be black hole but only during the relative short duration of the initial assumption (e.g. minutes). In term of technical specification, this translates into: a short timer, no change of attributes of stale routes, need to exchange information with the BGP peer (e.g. ability to preserve forwarding, forwarding preserved...) BGP Persistence targets the different use case of a catastrophic failure when the BGP control plane can remain down for a longer time (e.g. hours). In such case, if alternate path are available, they should be used as their are kept up to date. But if not alternate path are available, it is felt to be better to use stale old routes rather than no routes at all. In term of technical specification, this translates into: a long timer, defined per AFI/SAFI, the need to lower the preference of stale routes, no need to exchange information with the BGP peer. Possibly the need to have different timers per AFI/SAFI. Uttaro, et al. Expires September 10, 2012 [Page 4] Internet-Draft BGP Persistence March 2012 1.2. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Uttaro, et al. Expires September 10, 2012 [Page 5] Internet-Draft BGP Persistence March 2012 2. Communities This memo defines two new communities that are used to identify the capability of a path to persist and whether or not that path is live or stale. 2.1. DO_NOT_PERSIST This memo defines a new BGP community, DO_NOT_PERSIST, with value TBD (to be assigned by IANA). Attaching of the DO_NOT_PERSIST community SHOULD be controlled by configuration. The functionality SHOULD default to being disabled. 2.2. STALE This memo defines a new BGP community, STALE, with value TBD (to be assigned by IANA). Attaching of the STALE community is limited to a path that currently has not the DO_NOT_PERSIST community attached Uttaro, et al. Expires September 10, 2012 [Page 6] Internet-Draft BGP Persistence March 2012 3. Configuration (Persistence Timer and DO_NOT_PERSIST Community) Persistence is configured on a per session and per AFI/SAFI basis. Through the use of an inbound BGP policy selectively setting the DO_NOT_PERSIST community, the persistence behavior can be set on a per route basis. A speaker configures the ability to persist independently of its peer. There is no negotiation between the peers. A timer must be configured indicating the time to persist stale state from a peer where the session is no longer viable. This timer is designated as the persist-timer. A speaker may also attach the DO_NOT_PERSIST community value indicating if a path to a route should not persist. 3.1. Settings for Different Applications The setting of the persist-timer should be based upon the field of use. BGP is used in a many different applications that each bring a unique requirement for retaining state. The following is not meant as a comprehensive listing but to suggest timer settings for a subset of AFI/SAFIs. L2VPN This AFI/SAFI requires the exchange of routing state in order to establish PWs to realize a VPLS VPN, or a VPWS PW. This AFI/ SAFI does not require exchange of routing state with a customer and there is no eBGP session established. The persist-timer should be set to a large value on the order of days to infinity. L3VPN This AFI/SAFI requires the exchange of routing state to create a private VPN. This AFI/SAFI requires exchange of state with customers via eBGP and is dynamic. The SP needs to consider the possibility that stale state may not reflect the latest route updates and therefore may be incorrect from the customer perspective. The persist-timer should be set to a large value on the order of hours to a few days. this is built upon the notion some incorrectness is preferable to a large outage. Uttaro, et al. Expires September 10, 2012 [Page 7] Internet-Draft BGP Persistence March 2012 4. Operation 4.1. BGP session failure Assuming a session failure has occurred, a BGP persistent router SHOULD retain BGP routes unless they carry the DO_NOT_PERSIST community and propagate paths to downstream speakers that indicate that a given path is now stale. There is no restriction on whether the session is internal or external. 4.1.1. Attaching the STALE Community Value and Propagation of Paths The following rules must be followed: o Identify paths learned over a failed session that do not have the DO_NO_PERSIST community value attached. o For those paths, attach the STALE community value, lower their preference and propagate the updated path to peers. o For those paths learned over the failed session that have the DO_NOT_PERSIST community attached follow BGP rules: remove the routes from the RIB and generate withdrawals to all peers for those paths. 4.1.2. Lower route preference As the STALE routes are not dynamically updated anymore, it's desirable that they be only used in last resort. Hence when comparing paths for a prefix, a non STALE path should be preferred over a STALE path. If all path are marked as STALE, it's desirable to keep their relative (pre-STALE) priority. To achieve the above goals, the below mechanism is proposed. To lower the preference of the STALE routes within the Autonomous System, the LOCAL_PREF of the routes marked as STALE SHOULD be decreased by a configured value. If the result of the subtraction is negative, the LOCAL_PREF SHOULD be set to 0. Optionally, a configured BGP cost community may be attached. In this case, as described in [I-D.ietf-idr-custom-decision] in order to avoid potential forwarding loops, the operator needs to make sure that all routers are compliant with [I-D.ietf-idr-custom-decision]. In this case, it is also expected that the LOCAL_PREF would not be decreased (i.e. the configured value would be 0). Uttaro, et al. Expires September 10, 2012 [Page 8] Internet-Draft BGP Persistence March 2012 To allow for a lower preference of STALE routes across Autonomous System, ASBR in others AS which are configured with BGP Persistence, MAY lower the preference of PATH received with the STALE community over an eBGP session. Lowering the preference within their AS is performed as described above in the iBGP case. Note that if the ASBR is not persistent capable, this behavior can be implemented by the operator by configuring a BGP policy. 4.2. Forwarding As per BGP rules, the BGP MUST check that the BGP Next Hop is viable. As during the persistence situation, the BGP session will be down, the network operator SHOULD make sure that BGP has the ability to check Next-Hop liveliness. For routes learnt over an iBGP session, the IGP should be able to provide this. For routes learnt over an eBGP session, the liveness of the Next Hop may be checked by using a layer 1 (e.g. light), layer 2 (e.g. Ethernet OAM) or layer 3 (e.g. BFD) mechanism. When the forwarding plane is updated with a new next-hop, a make before break strategy SHOULD be employed. Such routing change may happen when the BGP session has failed and hence the nominal path has been de-preferenced and an alternate path selected, or when the BGP session is re-established and the nominal path is selected back. 4.3. BGP session re-establishement When a failed persistent BGP session is re-established, the Receiving Speaker MUST replace the stale routes by the routing updates received from the peer. Once the End-of-RIB marker for an address family is received from the peer, it MUST immediately remove any paths from the peer that are still marked as stale for that address family. If the End-of-RIB marker is not received before a configurable timer expired, it MUST immediately remove any paths from the peer that are still marked as stale. Uttaro, et al. Expires September 10, 2012 [Page 9] Internet-Draft BGP Persistence March 2012 5. Deployment Considerations BGP Persistence as described in this document is useful within a single autonomous system or across autonomous systems. If [I-D.ietf-idr-custom-decision] is used to lower the preference of the STALE paths, the operator needs to make sure that all routers are compliant with [I-D.ietf-idr-custom-decision]. Otherwise, forwarding loops, may form. When a BGP session is persistent enabled, the network operator SHOULD make sure that when the BGP session is down, BGP has a way to evaluate that the BGP Next Hop is viable and reachable. For routes learnt over an iBGP session, the IGP should be able to advertise the reachability of the next-hop. For routes learnt over an eBGP session, the liveness of the Next Hop need to be checked. For example using a layer 1 (e.g. light), layer 2 (e.g. Ethernet OAM) or layer 3 (e.g. BFD) mechanism. Uttaro, et al. Expires September 10, 2012 [Page 10] Internet-Draft BGP Persistence March 2012 6. Applications This technique may be useful in a wide array of applications where routing state is either fairly static or, the state is localized within a routing context. Some applications that come immediately to mind are L2 and L3 VPN. 6.1. Persistence in L2VPN (VPLS/VPWS) VPLS/VPWS VPNs use BGP to exchange routing state between two PEs. This exchange allows for the creation of a PW within a VPN context between those PEs. By definition, L2VPN does not exchange any routing state with customers via BGP. BGP persistence is very useful here as the state is quite constant. The only time state is exchanged is when a PW endpoint is provisioned, deleted or when a speaker reboots. Referring to Figure 1, PE1 and PE2 have advertised BGP routing state in order to create PWs between PE1 and PE2. The RRs are only responsible to reflect this state between the PEs. The use of a unique RD makes every path unique from the RRs perspective. Assume that the both RR experience catastrophic failure. Case 1 - All BGP speakers are persistent capable. The PWs created between PE1 and PE2 persist. Forwarding uninterrupted. Case 2 - PE1 and the RRs are persistent capable, PE2 is not. In this case the path advertised from PE2 via the RRs is persistent at PE1, the PW from PE1 to PE2 is not torn down. PE2 will remove the path from PE1 and tear down the PW from PE2 to PE1. THe effect is that MAC state learned at PE2 is valid as the PW is still valid. MAC state learned at PE1 is removed as the PW is no longer valid. Eventually MAC destinations recursed to the PW at PE1 destined for PE2 over the valid PW will time out. Assume that the RRs are valid but the iBGP sessions are torn down. Case 3 - All BGP speakers are persistent capable. The PWs created between PE1 and PE2 persist. Forwarding uninterrupted. Uttaro, et al. Expires September 10, 2012 [Page 11] Internet-Draft BGP Persistence March 2012 VPNA VPNA PW+++++++++++++++++++PW CE1-------PE1--------RR1-------PE2------CE2 | | | | ----------RR2--------- <--iBGP---><---iBGP--> Figure 1 6.2. Persistence in L3VPN --------RR1------- / A C \ CE1 ----- PE1 --Forwarding Path-- PE2 ---- CE2 \ B D / ------- RR2 ------ Figure 2 In the case of a Layer 3 VPN topology, during the failure of a route reflector device at the current time, all routing information propagated via BGP is purged from the routing database. In this case, forwarding is interrupted within such a topology due to the lack of signalling information, rather than an outage to the forwarding path between the PE devices. With the addition of BGP persistence, a complete service outage can be avoided. The topology shown in Figure 2 is a simple L3VPN topology consisting of two customer edge (CE) devices, along with two provider edge (PE), and route reflector (RR) devices. In this case, where an RFC4364 VPN topology is utilised a BGP session exists between PE1 to both RR1 and RR2, and from PE2 to RR1 and RR2, in order to propagate the VPN topology. Case 1: No BGP speakers are persistence capable: o In this scenario, during a simultaneous failure of RR1 and RR2 (which are extremely likely to share route reflector clients) both PE1 and PE2 remove all routing information from the VPN from their RIB, and hence a complete service outage is experienced. o Where either sessions A and B, or C and D fail simultaneously, routing information from either PE1 (in the case of A and B), or Uttaro, et al. Expires September 10, 2012 [Page 12] Internet-Draft BGP Persistence March 2012 PE2 (in the case of C and D) are withdrawn, and a partial service topology exists. o Both of the states described reflect a service outage where the forwarding path between the PE devices is not interrupted. Case 2: All BGP speakers are persistence capable: o PE1 continues to forward utilising the label information received from PE2 via the working forwarding path for the duration of the persistence timer (and vice versa). o This condition occurs regardless of the session(s) that fail. In the worst case where sessions A, B, C and D fail simultaneously, the network continues to operate in the state in which it was at the time of the failure. Case 3: PE1 and RR[12] are persistence capable - PE2 is not. o During a failure of BGP session A or B, PE1 will continue to forward utilising the routing information received from the RRs for PE2 for the duration of the persistence timer. PE2 will continue to forward utilising the routing information received from the RRs, again for the duration of the persistence timer. o In the case that either BGP session C or D fails, all routes will be withdrawn by RR[12] towards PE1 since these routes are not valid to be persisted by the RRs. The end result of this will be that the routes advertised by CE2 into the VPN will be withdrawn. o Where the worst case failure occurs (i.e. sessions A, B, C and D fail) the routes advertised by CE1 into the VPN will be persistently advertised by the RR devices, whereas those advertised by CE2 will be withdrawn. Clearly in the example shown in the figure this results in a service outage, but where multiple PE devices exist within a topology, service is maintained for the subset of CEs attached to PE devices supporting the persistence capability. Within the Layer 3 VPN deployment it should be noted that routing information is less static than that of the many Layer 2 VPNs since typically multiple routes exist within the topology rather than an individual MAC address or egress interface per CE device on the PE device. As such, the L3VPN operates with the routing databases in the 'core' of the network reflecting those at the time of failure. Should there be re-convergence for any path between the PE and CE devices, this will result in invalid routing information, should the egress PE device not hold alternate routing information for the Uttaro, et al. Expires September 10, 2012 [Page 13] Internet-Draft BGP Persistence March 2012 prefixes undergoing such re-convergence. It is expected that where each PE maintains multiple paths to each egress prefix (where an alternate path is available), it is expected that the egress PE will forward packets towards an alternative egress PE for the prefix in question where the topology is no longer valid. The lack of convergence within a Layer 3 topology during the persistent state SHOULD be considered since it may adversely affect services, however, an assumption is made that a degraded service is preferable to a complete service outage during a large-scale BGP control plane failure. Uttaro, et al. Expires September 10, 2012 [Page 14] Internet-Draft BGP Persistence March 2012 7. Interactions between GR and Persistence BGP Graceful Restart and BGP Persitence can be enabled independantly. o If only BGP Graceful Restart is enabled, BGP behaved as defined in [RFC4724]. o If only BGP Persistence is enabled, BGP behaved as defined in this document. o If both BGP Graceful Restart and BGP Persistence are enabled on a BGP session, since both graceful-restart and persistence provide a means by which routes are retained in the RIB after a BGP session is no longer established, then there is a need to define their interactions. The principle is that when the BGP session is down, Graceful Restart is the first to come into play. While BGP Graceful runs and keep the route, BGP Persistence has no effect. i.e. BGP routes are kept unchanged and not readvertised. If BGP Graceful Restart fails, then BGP Persistence kicks in to keep the route. i.e. BGP Routes are kept, de-preferenced and re- advertised. Case a: GR succeed and Persistence never kicks in: 1. BGP session failure --> GR behavior applies. * Route marked as stale. * Route are kept unchanged (hence not re-advertised). 2. BGP session is re-established before GR timer expires --> GR succeed, GR behavior applies 1. Route are refreshed. 2. When End-of-RIB is received, route still marked as stale are removed. 3. If routes have changed, routes are updated in the FIB and re- advertised to peer as per regular BGP. Case b: GR fails and Persistence kicks in: 1. BGP session failure --> GR behavior applies * Route marked as stale. Uttaro, et al. Expires September 10, 2012 [Page 15] Internet-Draft BGP Persistence March 2012 * Route are kept unchanged (hence not re-advertised). 2. Expiry of GR restart-time-expiry timer --> GR behavior ends, Persistent behavior applies. 1. GR stale routes are marked as Persistence stale and their preference is lowered. 2. As a result, regular BGP best path computation runs and possibly select alternate routes. + If routes have changed, routes are updated in the FIB. + Updated routes are advertised to peer as needed. 3. Session now runs in persistence mode as defined in this document It is expected that in general the Persistence timer SHOULD be set to a value greater than that of the Graceful Restart. Uttaro, et al. Expires September 10, 2012 [Page 16] Internet-Draft BGP Persistence March 2012 8. Security Considerations The security implications of the persistence mechanism defined within in this document are akin to those incurred by the maintenance of stale routing information within a network. This is particularly relevant when considering the maintenance of routing information that is utilised for service segregation - such as MPLS label entries. For MPLS VPN services, the effectiveness of the traffic isolation between VPNs relies on the correctness of the MPLS labels between ingress and egress PEs. In particular, when an egress PE withdraws a label L1 allocated to a VPN1 route, this label MUST not be assigned to a VPN route of a different VPN until all ingress PEs stop using the old VPN1 route using L1. Such a corner case may happen today, if the propagation of VPN routes by BGP messages between PEs takes more time than the label re- allocation delay on a PE. Given that we can generally bound worst case BGP propagation time to a few minutes (e.g. 2-5), the security breach will not occur if PEs are designed to not reallocate a previous used and withdrawn label before a few minutes. The problem is made worse with BGP GR between PEs as VPN routes can be stalled for a longer period of time (e.g. 20 minutes). This is further aggravated by the BGP persistent extension proposed in this document as VPN routes can be stalled for a much longer period of time (e.g. 2 hours, 1 day). Therefore, to avoid VPN breach, before enabling BGP persistence, SPs needs to check how fast a given label can be reused by a PE, taking into account: o The load of the BGP route churn on a PE (in term of number of VPN label advertised and churn rate). o The label allocation policy on the PE (possibly depending upon the size of pool of the VPN labels (which can be restricted by hardware consideration or others MPLS usages), the label allocation scheme (e.g. per route or per VRF/CE), the re- allocation policy (e.g. least recently used label...) Note that RFC 4781 [RFC4781] which defines Graceful Restart Mechanism for BGP with MPLS is also applicable to BGP Persistence. In addition to these considerations, the persistence mechanism described within this document is considered to be complex to exploit maliciously - in order to inject packets into a topology, there is a Uttaro, et al. Expires September 10, 2012 [Page 17] Internet-Draft BGP Persistence March 2012 requirement to engineer a specific persistence state between two PE devices, whilst engineering label reallocation to occur in a manner that results in the two topologies overlapping. Such allocation is particularly difficult to engineer (since it is typically an internal mechanism of an LSR). Uttaro, et al. Expires September 10, 2012 [Page 18] Internet-Draft BGP Persistence March 2012 9. IANA Considerations IANA shall assigned community values from BGP well-known communities registry[a] for the DO-NOT-PERSIST and STALE communities. Uttaro, et al. Expires September 10, 2012 [Page 19] Internet-Draft BGP Persistence March 2012 10. Acknowledgements We would like to acknowledge Roberto Fragassi (Alcatel-Lucent), John Medamana, (AT&T) Han Nguyen (AT&T), Jeffrey Haas (Juniper), Nabil Bitar (Verizon), Nicolai Leymann (DT) for their contributions to this document. Uttaro, et al. Expires September 10, 2012 [Page 20] Internet-Draft BGP Persistence March 2012 11. References 11.1. Normative References [I-D.ietf-idr-custom-decision] White, R. and A. Retana, "BGP Custom Decision Process", draft-ietf-idr-custom-decision-00 (work in progress), November 2011. [RFC1997] Chandrasekeran, R., Traina, P., and T. Li, "BGP Communities Attribute", RFC 1997, August 1996. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC4271] Rekhter, Y., Li, T., and S. Hares, "A Border Gateway Protocol 4 (BGP-4)", RFC 4271, January 2006. [RFC4724] Sangli, S., Chen, E., Fernando, R., Scudder, J., and Y. Rekhter, "Graceful Restart Mechanism for BGP", RFC 4724, January 2007. 11.2. Informative References [RFC4364] Rosen, E. and Y. Rekhter, "BGP/MPLS IP Virtual Private Networks (VPNs)", RFC 4364, February 2006. [RFC4781] Rekhter, Y. and R. Aggarwal, "Graceful Restart Mechanism for BGP with MPLS", RFC 4781, January 2007. Uttaro, et al. Expires September 10, 2012 [Page 21] Internet-Draft BGP Persistence March 2012 Appendix A. Appendix A. Changes / Author Notes [RFC Editor: Please remove this section before publication ] Changes -01 o PERSIST community removed o Use of local_pref or cost_community to lower the preference of the path within an AS. Between AS, the STALE community is used to convey the information. o Deployment considerations section enhanced. o Introduction explains why GR and persistence are different and target different needs. o Security section refer to RFC RFC 4781. o New section describing interaction between GR and Persistence. Uttaro, et al. Expires September 10, 2012 [Page 22] Internet-Draft BGP Persistence March 2012 Authors' Addresses James Uttaro AT&T 200 S. Laurel Avenue Middletown, NJ 07748 USA Email: ju1738@att.com Adam Simpson Alcatel-Lucent 600 March Road Ottawa, Ontario K2K 2E6 Canada Email: adam.simpson@alcatel-lucent.com Rob Shakir Cable&Wireless Worldwide London UK Email: rjs@cw.net URI: http://www.cw.com/ Clarence Filsfils Cisco Systems Brussels 1000 BE Email: cf@cisco.com Pradosh Mohapatra Cisco Systems 170 W. Tasman Drive San Jose, CA 95134 USA Email: pmohapat@cisco.com Uttaro, et al. Expires September 10, 2012 [Page 23] Internet-Draft BGP Persistence March 2012 Bruno Decraene France Telecom 38-40 Rue de General Leclerc 92794 Issy Moulineaux cedex 9 France Email: bruno.decraene@orange.com John Scudder Juniper Networks 1194 N. Mathilda Ave Sunnyvale, CA 94089 USA Email: jgs@juniper.net Yakov Rekhter Juniper Networks Email: yakov@juniper.net Uttaro, et al. Expires September 10, 2012 [Page 24]