CoRE Z. Shelby Internet-Draft Sensinode Intended status: Standards Track S. Krco Expires: November 18, 2012 Ericsson May 17, 2012 CoRE Resource Directory draft-shelby-core-resource-directory-03 Abstract In many M2M applications, direct discovery of resources is not practical due to sleeping nodes, disperse networks, or networks where multicast traffic is inefficient. These problems can be solved by employing an entity called a Resource Directory (RD), which hosts descriptions of resources held on other servers, allowing lookups to be performed for those resources. This document specifies the web interfaces that a Resource Directory supports in order for web servers to discover the RD and to register, maintain, lookup and remove resources descriptions. Furthermore, new link attributes useful in conjunction with an RD are defined. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on November 18, 2012. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of Shelby & Krco Expires November 18, 2012 [Page 1] Internet-Draft CoRE Resource Directory May 2012 publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Architecture and Use Cases . . . . . . . . . . . . . . . . . . 4 3.1. Use Case: Cellular M2M . . . . . . . . . . . . . . . . . . 5 3.2. Use Case: Home and Building Automation . . . . . . . . . . 6 4. Resource Directory Function Set . . . . . . . . . . . . . . . 6 4.1. Discovery . . . . . . . . . . . . . . . . . . . . . . . . 6 4.2. Registration . . . . . . . . . . . . . . . . . . . . . . . 8 4.3. Update . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.4. Validation . . . . . . . . . . . . . . . . . . . . . . . . 12 4.5. Removal . . . . . . . . . . . . . . . . . . . . . . . . . 13 5. RD Lookup Function Set . . . . . . . . . . . . . . . . . . . . 14 6. New Link-Format Attributes . . . . . . . . . . . . . . . . . . 16 6.1. Export 'exp' attribute . . . . . . . . . . . . . . . . . . 16 7. Security Considerations . . . . . . . . . . . . . . . . . . . 17 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 17 10. Changelog . . . . . . . . . . . . . . . . . . . . . . . . . . 17 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 18 11.1. Normative References . . . . . . . . . . . . . . . . . . . 18 11.2. Informative References . . . . . . . . . . . . . . . . . . 19 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 19 Shelby & Krco Expires November 18, 2012 [Page 2] Internet-Draft CoRE Resource Directory May 2012 1. Introduction The Constrained RESTful Environments (CoRE) working group aims at realizing the REST architecture in a suitable form for the most constrained nodes (e.g. 8-bit microcontrollers with limited RAM and ROM) and networks (e.g. 6LoWPAN). CoRE is aimed at machine-to- machine (M2M) applications such as smart energy and building automation. The discovery of resources offered by a constrained server is very important in machine-to-machine applications where there are no humans in the loop and static interfaces result in fragility. The discovery of resources provided by an HTTP Web Server is typically called Web Linking [RFC5988]. The use of Web Linking for the description and discovery of resources hosted by constrained web servers is specified by the CoRE Link Format [I-D.ietf-core-link-format]. This specification however only describes how to discover resources from the web server that hosts them by requesting /.well-known/core. In many M2M scenarios, direct discovery of resources is not practical due to sleeping nodes, disperse networks, or networks where multicast traffic is inefficient. These problems can be solved by employing an entity called a Resource Directory (RD), which hosts descriptions of resources held on other servers, allowing lookups to be performed for those resources. This document specifies the web interfaces that a Resource Directory supports in order for web servers to discover the RD and to registrer, maintain, lookup and remove resources descriptions. Furthermore, new link attributes useful in conjunction with a Resource Directory are defined. Although the examples in this document show the use of these interfaces with CoAP [I-D.ietf-core-coap], they may be applied in an equivalent manner to HTTP [RFC2616]. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. This specification requires readers to be familiar with all the terms and concepts that are discussed in [RFC5988] and [I-D.ietf-core-link-format]. Readers should also be familiar with the terms and concepts discussed in [I-D.ietf-core-coap]. The URI Template format is used to describe the REST interfaces defined in this specification [RFC6570]. This specification makes use of the Shelby & Krco Expires November 18, 2012 [Page 3] Internet-Draft CoRE Resource Directory May 2012 following additional terminology: Resource Directory An web entity that stores information about web resources and implements the REST interfaces defined in this specification for registration and lookup of those resources. Domain In the context of a Resource Directory, a domain is a logical grouping of end-points. All end-point within a domain MUST be unique. This specification assumes that the list of domains supported by an RD is pre-configured by that RD. End-point An end-point (EP) is a term used to describe a web server or client in [I-D.ietf-core-coap]. In the context of this specificaiton an end-point is used to describe a web server that registers resources to the Resource Directory. An end-point is identified by its end-point name, which is included during registration, and MUST be unique within the associated domain of the registration. 3. Architecture and Use Cases The resource directory architecture is shown in Figure 1. A Resource Directory (RD) is used as a repository for Web Links [RFC5988] about resources hosted on other web servers, which are called end-points (EP). An end-point is a web server associated with a port, thus a physical node may host one or more end-points. The RD implements a set of REST interfaces for end-points to register and maintain sets of Web Links (called resource directory entries), for the RD to validate entries, and for clients to lookup resources from the RD. End-points themselves can also act as clients. An RD can be logically segmented by the use of Domains. The domain an end-point is associated with can be defined by the RD or configured by an outside entity. End-points are assumed to proactively register and maintain resource directory entries on the RD, which are soft state and need to be periodially refreshed. An EP is provided with interfaces to register, update and remove a resource directory entry. Furthermore, a mechanism to discover a RD using the CoRE Link Format is defined. It is also possible for an RD to proactively discover Web Links from EPs and add them as resource directory entries, or to validate existing resource directory entries. A lookup interface for discovering any of the Web Links held in the RD is provided using the CoRE Link Format. Shelby & Krco Expires November 18, 2012 [Page 4] Internet-Draft CoRE Resource Directory May 2012 Registration Lookup +----+ | | | EP |---- | | +----+ ---- | | --|- +------+ | +----+ | ----| | | +--------+ | EP | ---------|-----| RD |----|-----| Client | +----+ | ----| | | +--------+ --|- +------+ | +----+ ---- | | | EP |---- | | +----+ Figure 1: The resource directory architecture. 3.1. Use Case: Cellular M2M Over the last few years, mobile operators around the world have focused on development of M2M solutions in order to expand the business to the new type of users, i.e. machines. The machines are connected directly to a mobile network using appropriate embedded air interface (GSM/GPRS, WCDMA, LTE) or via a gateway providing short and wide range wireless interfaces. From the system design point of view, the ambition is to design horizontal solutions that can enable utilization of machines in different applications depending on their current availability and capabilities as well as application requirements, thus avoiding silo like solutions. One of the crucial enablers of such design is the ability to discover resources (machines - End Points) capable of providing required information at a given time or acting on instructions from the end users. In a typical scenario, during a boot-up procedure (and periodically afterwards), the machines (EPs) register with a Resource Directory (for example EPs installed on vehicles enabling tracking of their position for the fleet management purposes and monitoring environment parameters) hosted by the mobile operator or somewhere else in the network, submiting a description of own capabilities. Due to the usual network configuration of mobile networks, the EPs attached to the mobile network do not have routable addresses. Therefore, a remote server is usually used to provide proxy access to the EPs. The address of each (proxy) EP on this server is included in the resource description stored in the RD. The users, for example mobile applications for environment monitoring, contact the RD, look-up the EPs capable of providing information about the environment using appropriate set of tags, obtain information on how to contact them (URLs of the proxy server) and then initate interaction to obtain information that is finally processed, displayed on the screen and Shelby & Krco Expires November 18, 2012 [Page 5] Internet-Draft CoRE Resource Directory May 2012 usually stored in a database. Similarly, fleet management systems provide a set of credentials along with the appropriate tags to the RD to look-up for EPs deployed on the vehicles the application is responsible for. 3.2. Use Case: Home and Building Automation Home and commercial building automation systems can benefit from the use of M2M web services. The use of CoRE in home automation across multiple subnets is described in [I-D.brandt-coap-subnet-discovery] and in commercial building automation in [I-D.vanderstok-core-bc]. The discovery requirements of these applications are demanding. Home automation usually relies on run-time discovery to commision the system, whereas in building automation a combination of professional commissioning and run-time discovery is used. Both home and building automation involve peer-to-peer interactions between end-points, and involve battery-powered sleeping devices. The exporting of resource information to other discovery systems is also important in these automation applications. In home automation there is a need to interact with other consumer electronics, which may already support DNS-SD, and in building automation larger resource directories or DNS-SD covering multiple buildings. 4. Resource Directory Function Set This section defines the REST interfaces between an RD and end-point servers, which is called the Resource Directory Function Set. Although the examples throughout this section assume use of CoAP [I-D.ietf-core-coap], these REST interfaces can also be realized using HTTP [RFC2616]. An RD implementing this specification MUST support the discovery, registration, update, and removal interfaces defined in this section and MAY support the validation interface. For the purpose of validation, an end-point implementing this specification SHOULD support Etag validation on /.well-known/core. 4.1. Discovery Before an end-point can make use of an RD, it must first know its IP address, port and the path of its RD Function Set. There can be several mechanisms for discovering the RD including assuming a default location (e.g. on an Edge Router in a LoWPAN), by assigning an anycast address to the RD, using DHCP, or by discovering the RD using the CoRE Link Format. This section defines discovery of the RD using the well-known interface of the CoRE Link Format [I-D.ietf-core-link-format] as the required mechanism. It is however expected that RDs will also be discoverable via other methods Shelby & Krco Expires November 18, 2012 [Page 6] Internet-Draft CoRE Resource Directory May 2012 depending on the deployment. Discovery is performed by sending either a multicast or unicast GET request to /.well-known/core and including a Resource Type (rt) parameter [I-D.ietf-core-link-format] with the value "core.rd" in the query string. Likewise, a Resource Type parameter value of "core.rd- lookup" is used to discover the RD Lookup Function Set. Upon success, the response will contain a payload with a link format entry for each RD discovered, with the URL indicating the root resource of the RD. When performing multicast discovery, the multicast IP address used will depend on the scope required and the multicast capabilities of the network. An implementation of this specification MUST support query filtering for the rt parameter as defined in [I-D.ietf-core-link-format]. The discovery interface is specified as follows: Interaction: EP -> RD Method: GET URI Template: /.well-known/core{?rt} URI Template Variables: rt := Resource Type (optional). MAY contain the value "core.rd", "core.rd-lookup" or "core.rd*" Content-Type: application/link-format (if any) Success: 2.05 "Content" with an application/link-format payload containing a matching entry for the RD resource. Failure: 4.04 "Not Found" is returned in case no matching entry is found for a unicast request. Failure: No error response to a multicast request. Failure: 4.00 "Bad Request" The following example shows an end-point discovering an RD using this interface, thus learning that the base RD resource is at /rd. Note that it is up to the RD to choose its base RD resource, although it is recommended to use default locations where possible. Shelby & Krco Expires November 18, 2012 [Page 7] Internet-Draft CoRE Resource Directory May 2012 End-point RD | | | ----- GET /.well-known/core?rt=core.rd* ------> | | | | | | <---- 2.05 Content "; rt="core.rd" ------ | | | Req: GET coap://[ff02::1]/.well-known/core?rt=core.rd* Res: 2.05 Content ;rt="core.rd", ;rt="core.rd-lookup" 4.2. Registration After discovering the location of an RD Function Set, an end-point MAY register its resources using the registration interface. This interface accepts a POST from an end-point containing the list of resources to be added to the directory as the message payload in the CoRE Link Format along with query string parameters indicating the name of the end-point, its domain and the lifetime of the registration. All parameters except the end-point name are optional. The RD then creates a new resource or updates an existing resource in the RD and returns its location. An end-point MUST use that location when refreshing registrations using this interface. End-point resources in the RD are kept active for the period indicated by the lifetime parameter. The end-point is responsible for refreshing the entry within this period using either the registration or update interface. The registration interface MUST be implemented to be idempotent, so that registering twice with the same end-point parameter does not create multiple RD entries. The registration interface is specified as follows: Interaction: EP -> RD Method: POST URI Template: /{+rd}{?ep,d,rt,lt,con} URI Template Variables: Shelby & Krco Expires November 18, 2012 [Page 8] Internet-Draft CoRE Resource Directory May 2012 rd := RD Function Set path (mandatory). This is the path of the RD Function Set. An RD SHOULD use the value "rd" for this variable whenever possible. ep := End-point (mandatory). The end-point identifier or name of the registering node, unique within that domain. The maximum length of this parameter is 63 octets. d := Domain (optional). The domain to which this end-point belongs. The maximum length of this parameter is 63 octets. Optional. When this parameter is elided, the RD MAY associate the end-point with a configured default domain. rt := End-point Type (optional). The semantic type of the end- point. The maximum length of this parameter is 63 octets. Optional. lt := Lifetime (optional). Lifetime of the registration in seconds. Range of 60-4294967295. If no lifetime is included, a default value of 86400 (24 hours) SHOULD be assumed. con := Context (optional). This parameter sets the scheme, address and port at which this server is available in the form scheme://host:port. Optional. In the absence of this parameter the scheme of the protocol, source IP address and source port used to register are assumed. Content-Type: application/link-format Etag: The Etag option MAY be included to allow an RD to perform validation in the future. Success: 2.01 "Created". The Location header MUST be included with the new resource entry for the end-point. This Location MUST be a stable identifier generated by the RD as it is used for all subsequent operations on this registration (update, delete). Failure: 4.00 "Bad Request". Malformed request. Failure: 5.03 "Service Unavailable". Service could not perform the operation. The following example shows an end-point with the name "node1" registering two resources to an RD using this interface. The resulting location /rd/4521 is just an example of an RD generated location. Shelby & Krco Expires November 18, 2012 [Page 9] Internet-Draft CoRE Resource Directory May 2012 End-point RD | | | --- POST /rd?ep=node1 " | | | | | | <-- 2.01 Created Location: /rd/4521 ---------- | | | Req: POST coap://rd.example.com/rd?ep=node1 Etag: 0x3f Payload: ;ct=41;rt="TemperatureC";if="sensor", ;ct=41;rt="LightLux";if="sensor" Res: 2.01 Created Location: /rd/4521 4.3. Update The update interface is used by an end-point to refresh or update its registration with an RD. To use the interface, the end-point sends a PUT request to the resource returned in the Location option in the response to the first registration. An update MAY contain registration parameters or a payload in CoRE Link Format if there have been changes since the last registration or update. Paremeters that have not changed SHOULD NOT be included in an update. The update interface is specified as follows: Interaction: EP -> RD Method: PUT URI Template: /{+location}{?rt,lt,con} URI Template Variables: location := This is the Location path returned by the RD as a result of a successful registration. rt := End-point Type (optional). The semantic type of the end- point. The maximum length of this parameter is 63 octets. Optional. Shelby & Krco Expires November 18, 2012 [Page 10] Internet-Draft CoRE Resource Directory May 2012 lt := Lifetime (optional). Lifetime of the registration in seconds. Range of 60-4294967295. If no lifetime is included, a default value of 86400 (24 hours) SHOULD be assumed. con := Context (optional). This parameter sets the scheme, address and port at which this server is available in the form scheme://host:port. Optional. In the absence of this parameter the scheme of the protocol, source IP address and source port used to register are assumed. Content-Type: application/link-format (if any) Etag: The Etag option MAY be included to allow an RD to compare the existing entry and perform validation in the future. Success: 2.04 "Changed" in case the resource and/or lifetime was successfully updated Failure: 4.00 "Bad Request". Malformed request. Failure: 5.03 "Service Unavailable". Service could not perform the operation. The following example shows an end-point updating a new set of resources to an RD using this interface. End-point RD | | | --- PUT /rd/4521 " | | | | | | <-- 2.04 Changed ---------------------------- | | | Req: PUT /rd/4521 Etag: 0x40 Payload: ;ct=41;ins="Indoor";rt="TemperatureC";if="sensor", ;ct=41;ins="Outdoor";rt="TemperatureC";if="sensor", ;ct=41;rt="LightLux";if="sensor" Res: 2.04 Changed Shelby & Krco Expires November 18, 2012 [Page 11] Internet-Draft CoRE Resource Directory May 2012 4.4. Validation In some cases, an RD may want to validate that it has the latest version of an end-point's resources. This can be performed with a GET on the well-known interface of the CoRE Link Format including the latest Etag stored for that end-point. For the purpose of validation, an end-point implementing this specification SHOULD support Etag validation on /.well-known/core. The validation interface is specified as follows: Interaction: RD -> EP Method: GET Path: /.well-known/core Parameters: None Content-Type: application/link-format (if any) Etag: The Etag option MUST be included Success: 2.03 "Valid" in case the Etag matches Success: 2.05 "Content" in case the Etag does not match, the response MUST include the most recent resource representation and its corresponding Etag. Failure: 4.00 "Bad Request". Malformed request. The following examples shows a successful validation. End-point RD | | | <--- GET /.well-known/core Etag: 0x40 -------- | | | | | | --- 2.03 Valid -----------------------------> | | | Req: GET /.well-known/core Etag: 0x40 Res: 2.03 Valid Shelby & Krco Expires November 18, 2012 [Page 12] Internet-Draft CoRE Resource Directory May 2012 4.5. Removal Although RD entries have soft state and will eventually timeout after their lifetime, an end-point SHOULD explicitly remove its entry from the RD if it knows it will no longer be available (for example on shut-down). This is accomplished using a removal interface on the RD by performing a DELETE on the end-point resource. The removal interface is specified as follows: Interaction: EP -> RD Method: DELETE URI Template: /{+location} URI Template Variables: location := This is the Location path returned by the RD as a result of a successful registration. Content-Type: None Success: 2.02 "Deleted" upon successful deletion Failure: 4.00 "Bad Request". Malformed request. Failure: 5.03 "Service Unavailable". Service could not perform the operation. The following examples shows successful removal of the end-point from the RD. End-point RD | | | --- DELETE /rd/4521 ------------------------> | | | | | | <-- 2.02 Deleted ---------------------------- | | | Req: DELETE /rd/4521 Res: 2.02 Deleted Shelby & Krco Expires November 18, 2012 [Page 13] Internet-Draft CoRE Resource Directory May 2012 5. RD Lookup Function Set In order for an RD to be used for discovering resources registered with it, a lookup interface can be provided using this function set. This lookup interface is defined as a default, and it is assumed that RDs may also support lookups to return resource descriptions in alternative formats (e.g. Atom or HTML Link) or using more advanced interfaces (e.g. supporting context or semantic based lookup). This function set allows lookups for domains, end-points and resources using attributes defined in the RD Function Set and for use with the CoRE Link Format. The result of a lookup request is the list of links (if any) in CoRE Link Format corresponding to the type of lookup. The target of these links SHOULD be the actual location of the domain, end-point or resource, but MAY be an intermediate proxy e.g. in the case of an HTTP lookup interface for CoAP end- points. The lookup interface is specified as follows: Interaction: Client -> RD Method: GET URI Template: /{+rd-lookup-base}/{lookup-type}{?d,ep,resource-param} Parameters: rd-lookup-base := RD Lookup Function Set path (mandatory). This is the path of the RD Lookup Function Set. An RD SHOULD use the value "rd-lookup" for this variable whenever possible. lookup-type := ("d", "ep", "res") (mandatory) This variable is used to select the kind of lookup to perform (domain, end-point or resource). ep := End-point (optional). Used for end-point and resource lookups. d := Domain (optional). Used for domain, end-point and resource lookups. rt := End-point type (optional). Used for end-point lookups. resource-param := Link attribute parameters (optional). Any link attribute as defined in Section 4.1 of [I-D.ietf-core-link-format], used for resource lookups. Shelby & Krco Expires November 18, 2012 [Page 14] Internet-Draft CoRE Resource Directory May 2012 Content-Type: application/link-format (if any) Success: 2.05 "Content" with an application/link-format payload containing a matching entries for the lookup. Failure: 4.04 "Not Found" in case no matching entry is found for a unicast request. Failure: No error response to a multicast request. Failure: 4.00 "Bad Request". Malformed request. Failure: 5.03 "Service Unavailable". Service could not perform the operation. The following example shows a client performing a resource lookup: Client RD | | | ----- GET /rd-lookup/res?rt=Temperature -----------------> | | | | | | <-- 2.05 Content ";rt="Temperature" ---- | | | Req: GET /rd-lookup/res?rt=Temperature Res: 2.05 Content ;rt="Temperature" The following example shows a client performing an end-point lookup: Client RD | | | ----- GET /rd-lookup/ep?rt=PowerNode --------------------> | | | | | | <-- 2.05 Content ";ep="node5" ----------- | | | Shelby & Krco Expires November 18, 2012 [Page 15] Internet-Draft CoRE Resource Directory May 2012 Req: GET /rd-lookup/ep?rt=PowerNode Res: 2.05 Content ;ep="node5" ;ep="node7" The following example shows a client performing a domain lookup: Client RD | | | ----- GET /rd-lookup/domain -----------------------------> | | | | | | <-- 2.05 Content ";d=domain1,;d=domain2 --------- | | | Req: GET /rd-lookup/domain Res: 2.05 Content ;d=domain1, ;d=domain2 6. New Link-Format Attributes When using the CoRE Link Format to describe resources being discovered by or posted to a resource directory service, additional information about those resources is useful. This specification defines the following new attributes for use in the CoRE Link Format [I-D.ietf-core-link-format]: link-extension = ( "exp" ) 6.1. Export 'exp' attribute The Export "exp" attribute is used as a flag to indicate that a link description MAY be exported by a resource directory to external directories. The CoRE Link Format is used for many purposes between CoAP end- points. Some are useful mainly locally, for example checking the Shelby & Krco Expires November 18, 2012 [Page 16] Internet-Draft CoRE Resource Directory May 2012 observability of a resource before accessing it, determining the size of a resource, or traversing dynamic resource structures. However, other links are very useful to be exported to other directories, for example the entry point resource to a functional service. 7. Security Considerations This document needs the same security considerations as described in Section 7 of [RFC5988] and Section 6 of [I-D.ietf-core-link-format]. The /.well-known/core resource may be protected e.g. using DTLS when hosted on a CoAP server as described in [I-D.ietf-core-coap]. Access control SHOULD be performed separately for the RD Function Set and the RD Lookup Function Set independently, as different end-points may be authorized to register with an RD from those authorized to lookup end-points from the RD. Such access control SHOULD be performed in as fine-grained a level as possible. For example access control for lookups could be performed either at the domain, end- point or resource level. 8. IANA Considerations "core.rd" and "core.rd-lookup" resource type needs to be registered when the appropriate registry is created by [I-D.ietf-core-link-format]. The "exp" attribute needs to be registered when a future Web Linking attribute is created. 9. Acknowledgments Szymon Sasin, Carsten Bormann, Kerry Lynn, Peter van der Stok, Anders Brandt, Matthieu Vial, Sampo Ukkola and Linyi Tian have provided helpful comments, discussions and ideas to improve and shape this document. The authors would also like to thank their collagues from the EU FP7 SENSEI project, where many of the resource directory concepts were originally developed. 10. Changelog Changes from -02 to -03: o Changed the end-point name back to a single registration parameter ep= and removed the h= and ins= parameters. Shelby & Krco Expires November 18, 2012 [Page 17] Internet-Draft CoRE Resource Directory May 2012 o Updated REST interface descriptions to use RFC6570 URI Template format. o Introduced an improved RD Lookup design as its own function set. o Improved the security considerations section. o Made the POST registration interface idempotent by requiring the ep= paramter to be present. Changes from -01 to -02: o Added a terminology section. o Changed the inclusing of an Etag in registration or update to a MAY. o Added the concept of an RD domain and a registration parameter for it. o Recommended the Location returned from a registration to be stable, allowing for end-point and domain information to be changed during updates. o Changed the lookup interface to accept end-point and domain as query string parameters to control the scope of a lookup. 11. References 11.1. Normative References [I-D.ietf-core-link-format] Shelby, Z., "CoRE Link Format", draft-ietf-core-link-format-06 (work in progress), June 2011. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC5988] Nottingham, M., "Web Linking", RFC 5988, October 2010. [RFC6570] Gregorio, J., Fielding, R., Hadley, M., Nottingham, M., and D. Orchard, "URI Template", RFC 6570, March 2012. Shelby & Krco Expires November 18, 2012 [Page 18] Internet-Draft CoRE Resource Directory May 2012 11.2. Informative References [I-D.brandt-coap-subnet-discovery] Brandt, A., "Discovery of CoAP servers across subnets", draft-brandt-coap-subnet-discovery-00 (work in progress), March 2011. [I-D.ietf-core-coap] Shelby, Z., Hartke, K., Bormann, C., and B. Frank, "Constrained Application Protocol (CoAP)", draft-ietf-core-coap-06 (work in progress), May 2011. [I-D.vanderstok-core-bc] Stok, P. and K. Lynn, "CoAP Utilization for Building Control", draft-vanderstok-core-bc-03 (work in progress), March 2011. [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. Authors' Addresses Zach Shelby Sensinode Kidekuja 2 Vuokatti 88600 FINLAND Phone: +358407796297 Email: zach@sensinode.com Srdjan Krco Ericsson Phone: Email: srdjan.krco@ericsson.com Shelby & Krco Expires November 18, 2012 [Page 19]