ACE Working Group L. Seitz Internet-Draft RISE SICS AB Intended status: Standards Track F. Palombini Expires: April 18, 2018 Ericsson AB M. Gunnarsson RISE SICS AB October 15, 2017 OSCOAP profile of the Authentication and Authorization for Constrained Environments Framework draft-seitz-ace-oscoap-profile-05 Abstract This memo specifies a profile for the Authentication and Authorization for Constrained Environments (ACE) framework. It utilizes Object Security of CoAP (OSCOAP) to provide communication security, server authentication, and proof-of-possession for a key owned by the client and bound to an OAuth 2.0 access token. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on April 18, 2018. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect Seitz, et al. Expires April 18, 2018 [Page 1] Internet-Draft OSCOAP Profile of ACE October 2017 to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3 2. Client to Resource Server . . . . . . . . . . . . . . . . . . 3 2.1. Signaling the use of OSCOAP . . . . . . . . . . . . . . . 3 2.2. Key establishment for OSCOAP . . . . . . . . . . . . . . 4 2.3. Client to Authorization Server . . . . . . . . . . . . . 6 3. Resource Server to Authorization Server . . . . . . . . . . . 7 4. Security Considerations . . . . . . . . . . . . . . . . . . . 7 5. Privacy Considerations . . . . . . . . . . . . . . . . . . . 7 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.1. Normative References . . . . . . . . . . . . . . . . . . 7 7.2. Informative References . . . . . . . . . . . . . . . . . 8 Appendix A. Using the pop-key with EDHOC (EDHOC+OSCOAP) . . . . 9 A.1. Using Asymmetric Keys . . . . . . . . . . . . . . . . . . 10 A.2. Using Symmetric Keys . . . . . . . . . . . . . . . . . . 11 A.3. Processing . . . . . . . . . . . . . . . . . . . . . . . 13 Appendix B. Profile Requirements . . . . . . . . . . . . . . . . 14 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 15 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 15 1. Introduction This memo specifies a profile of the ACE framework [I-D.ietf-ace-oauth-authz]. In this profile, a client and a resource server use CoAP [RFC7252] to communicate. The client uses an access token, bound to a key (the proof-of-possession key) to authorize its access to the resource server. In order to provide communication security, proof of possession, and server authentication they use Object Security of CoAP (OSCOAP) [I-D.ietf-core-object-security]. Optionally the client and the resource server may also use CoAP and OSCOAP to communicate with the authorization server. OSCOAP specifies how to use CBOR Object Signing and Encryption (COSE) [RFC8152] to secure CoAP messages. In order to provide replay and reordering protection OSCOAP also introduces sequence numbers that are used together with COSE. Seitz, et al. Expires April 18, 2018 [Page 2] Internet-Draft OSCOAP Profile of ACE October 2017 1.1. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. These words may also appear in this document in lowercase, absent their normative meanings. Certain security-related terms such as "authentication", "authorization", "confidentiality", "(data) integrity", "message authentication code", and "verify" are taken from [RFC4949]. Since we describe exchanges as RESTful protocol interactions HTTP [RFC7231] offers useful terminology. Terminology for entities in the architecture is defined in OAuth 2.0 [RFC6749] and [I-D.ietf-ace-actors], such as client (C), resource server (RS), and authorization server (AS). It is assumed in this document that a given resource on a specific RS is associated to a unique AS. Note that the term "endpoint" is used here following its OAuth definition, which is to denote resources such as /token and /introspect at the AS and /authz-info at the RS. The CoAP [RFC7252] definition, which is "An entity participating in the CoAP protocol" is not used in this memo. 2. Client to Resource Server The use of OSCOAP for arbitrary CoAP messages is specified in [I-D.ietf-core-object-security]. This section defines the specific uses and their purpose for securing the communication between a client and a resource server, and the parameters needed to negotiate the use of this profile with the token endpoint at the authorization server as specified in section 5.5 of the ACE framework [I-D.ietf-ace-oauth-authz]. 2.1. Signaling the use of OSCOAP A client requests a token at an AS via the /token endpoint. This follows the message formats specified in section 5.5.1 of the ACE framework [I-D.ietf-ace-oauth-authz]. The AS responding to a successful access token request as defined in section 5.5.2 of the ACE framework can signal that the use of OSCOAP is REQUIRED for a specific access token by including the "profile" parameter with the value "coap_oscoap" in the access token response. This means that the client MUST use OSCOAP towards all resource Seitz, et al. Expires April 18, 2018 [Page 3] Internet-Draft OSCOAP Profile of ACE October 2017 servers for which this access token is valid, and follow Section 2.2 to derive the security context to run OSCOAP. The error response procedures defined in section 5.5.3 of the ACE framework are unchanged by this profile. Note the the client and the authorization server MAY OPTIONALLY use OSCOAP to protect the interaction via the /token endpoint. See section 3 for details. 2.2. Key establishment for OSCOAP Section 3.2 of OSCOAP [I-D.ietf-core-object-security] defines how to derive a security context based on a shared master secret and a few other parameters, established between client and server. The proof- of-possession key (pop-key) provisioned from the AS MAY, in case of pre-shared keys, be used directly as master secret in OSCOAP. If OSCOAP is used directly with the symmetric pop-key as master secret, then the AS MUST provision the following data, in response to the access token request: o a master secret o the sender identifier o the recipient identifier Additionally, the AS MAY provision the following data, in the same response. In case these parameters are omitted, the default values are used as described in section 3.2 of [I-D.ietf-core-object-security]. o an AEAD algorithm o a KDF algorithm o a salt o a replay window type and size The master secret MUST be communicated as COSE_Key in the 'cnf' parameter of the access token response as defined in section 5.5.4.5 of [I-D.ietf-ace-oauth-authz]. The AEAD algorithm MAY be included as the 'alg' parameter in the COSE_Key; the KDF algorithm MAY be included as the 'kdf' parameter of the COSE_Key and the salt MAY be included as the 'slt' parameter of the COSE_Key as defined in table 1. The same parameters MUST be included as metadata of the access Seitz, et al. Expires April 18, 2018 [Page 4] Internet-Draft OSCOAP Profile of ACE October 2017 token, if the token is a CWT [I-D.ietf-ace-cbor-web-token], the same COSE_Key structure MUST be placed in the 'cnf' claim of this token. The AS MUST also assign identifiers to both client and RS, which are then used as Sender ID and Recipient ID in the OSCOAP context as described in section 3.1 of [I-D.ietf-core-object-security]. These identifiers MUST be unique in the set of all clients and RS identifiers for a certain AS. Moreover, these MUST be included in the COSE_Key as header parameters, as defined in table 1. We assume in this document that a resource is associated to one single AS, which makes it possible to assume unique identifiers for each client requesting a particular resource to a RS. If this is not the case, collisions of identifiers may appear in the RS, in which case the RS needs to have a mechanism in place to disambiguate identifiers or mitigate their effect. Note that C should set the Sender ID of its security context to the clientId value received and the Recipient ID to the serverId value, and RS should do the opposite. +----------+-------+--------------+------------+-------------------+ | name | label | CBOR type | registry | description | +----------+-------+--------------+------------+-------------------+ | clientId | TBD | bstr | | Identifies the | | | | | | client in an | | | | | | OSCOAP context | | | | | | using this key | | | | | | | | serverId | TBD | bstr | | Identifies the | | | | | | server in an | | | | | | OSCOAP context | | | | | | using this key | | | | | | | | kdf | TBD | bstr | | Identifies the | | | | | | KDF algorithm in | | | | | | an OSCOAP context | | | | | | using this key | | | | | | | | slt | TBD | bstr | | Identifies the | | | | | | master salt in | | | | | | an OSCOAP context | | | | | | using this key | +----------+-------+--------------+------------+-------------------+ Table 1: Additional common header parameters for COSE_Key Figure 1 shows an example of such an AS response, in CBOR diagnostic notation without the tag and value abbreviations. Seitz, et al. Expires April 18, 2018 [Page 5] Internet-Draft OSCOAP Profile of ACE October 2017 Header: Created (Code=2.01) Content-Type: "application/cose+cbor" Payload: { "access_token" : b64'SlAV32hkKG ... (remainder of access token omitted for brevity)', "profile" : "coap_oscoap", "expires_in" : "3600", "cnf" : { "COSE_Key" : { "kty" : "Symmetric", "alg" : "AES-CCM-16-64-128", "clientId" : b64'qA', "serverId" : b64'Qg', "k" : b64'+a+Dg2jjU+eIiOFCa9lObw' } } } Figure 1: Example AS response with OSCOAP parameters. Figure 2 shows an example CWT, containing the necessary OSCOAP parameters in the 'cnf' claim, in CBOR diagnostic notation without tag and value abbreviations. { "aud" : "tempSensorInLivingRoom", "iat" : "1360189224", "exp" : "1360289224", "scope" : "temperature_g firmware_p", "cnf" : { "COSE_Key" : { "kty" : "Symmetric", "alg" : "AES-CCM-16-64-128", "clientId" : b64'Qg', "serverId" : b64'qA', "k" : b64'+a+Dg2jjU+eIiOFCa9lObw' } } Figure 2: Example CWT with OSCOAP parameters. 2.3. Client to Authorization Server As specified in the ACE framework section 5.5 [I-D.ietf-ace-oauth-authz], the Client and AS can also use CoAP instead of HTTP to communicate via the token endpoint. This section specifies how to use OSCOAP between Client and AS together with CoAP. Seitz, et al. Expires April 18, 2018 [Page 6] Internet-Draft OSCOAP Profile of ACE October 2017 The use of OSCOAP for this communication is OPTIONAL in this profile, other security protocols (such as DTLS) MAY be used instead. The client and the AS are expected to have pre-established credentials (e.g. raw public keys). How these credentials are established is out of scope for this profile. Furthermore the client and the AS communicate using CoAP through the token endpoint as specified in section 5.5 of [I-D.ietf-ace-oauth-authz]. 3. Resource Server to Authorization Server As specified in the ACE framework section 5.6 [I-D.ietf-ace-oauth-authz], the RS and AS can also use CoAP instead of HTTP to communicate via the introspection endpoint. This section specifies how to use OSCOAP between RS and AS together with CoAP. The use of OSCOAP for this communication is OPTIONAL in this profile, other security protocols (such as DTLS) MAY be used instead. The RS and the AS are expected to have pre-established credentials (e.g. symmetric keys). How these credentials are established is out of scope for this profile. Furthermore the RS and the AS communicate using CoAP through the introspection endpoint as specified in section 5.6 of [I-D.ietf-ace-oauth-authz]. 4. Security Considerations TBD. 5. Privacy Considerations TBD. 6. IANA Considerations TBD. 'coap_oscoap' as profile id. Header parameters 'sid', 'rid', 'kdf' and 'slt' for COSE_Key. 7. References 7.1. Normative References [I-D.ietf-ace-cbor-web-token] Jones, M., Wahlstroem, E., Erdtman, S., and H. Tschofenig, "CBOR Web Token (CWT)", draft-ietf-ace-cbor-web-token-08 (work in progress), August 2017. Seitz, et al. Expires April 18, 2018 [Page 7] Internet-Draft OSCOAP Profile of ACE October 2017 [I-D.ietf-ace-oauth-authz] Seitz, L., Selander, G., Wahlstroem, E., Erdtman, S., and H. Tschofenig, "Authentication and Authorization for Constrained Environments (ACE)", draft-ietf-ace-oauth- authz-07 (work in progress), August 2017. [I-D.ietf-core-object-security] Selander, G., Mattsson, J., Palombini, F., and L. Seitz, "Object Security for Constrained RESTful Environments (OSCORE)", draft-ietf-core-object-security-05 (work in progress), September 2017. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7252] Shelby, Z., Hartke, K., and C. Bormann, "The Constrained Application Protocol (CoAP)", RFC 7252, DOI 10.17487/RFC7252, June 2014, . [RFC8152] Schaad, J., "CBOR Object Signing and Encryption (COSE)", RFC 8152, DOI 10.17487/RFC8152, July 2017, . 7.2. Informative References [I-D.gerdes-ace-dcaf-authorize] Gerdes, S., Bergmann, O., and C. Bormann, "Delegated CoAP Authentication and Authorization Framework (DCAF)", draft- gerdes-ace-dcaf-authorize-04 (work in progress), October 2015. [I-D.ietf-ace-actors] Gerdes, S., Seitz, L., Selander, G., and C. Bormann, "An architecture for authorization in constrained environments", draft-ietf-ace-actors-05 (work in progress), March 2017. [I-D.selander-ace-cose-ecdhe] Selander, G., Mattsson, J., and F. Palombini, "Ephemeral Diffie-Hellman Over COSE (EDHOC)", draft-selander-ace- cose-ecdhe-07 (work in progress), July 2017. [RFC4949] Shirey, R., "Internet Security Glossary, Version 2", FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007, . Seitz, et al. Expires April 18, 2018 [Page 8] Internet-Draft OSCOAP Profile of ACE October 2017 [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [RFC7049] Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049, October 2013, . [RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content", RFC 7231, DOI 10.17487/RFC7231, June 2014, . Appendix A. Using the pop-key with EDHOC (EDHOC+OSCOAP) EDHOC specifies an authenticated Diffie-Hellman protocol that allows two parties to use CBOR [RFC7049] and COSE in order to establish a shared secret key with perfect forward secrecy. The use of Ephemeral Diffie-Hellman Over COSE (EDHOC) [I-D.selander-ace-cose-ecdhe] in this profile in addition to OSCOAP, provides perfect forward secrecy (PFS) and the initial proof-of-possession, which ties the proof-of- possession key to an OSCOAP security context. If EDHOC is used together with OSCOAP, and the pop-key (symmetric or asymmetric) is used to authenticate the messages in EDHOC, then the AS MUST provision the following data, in response to the access token request: o a symmetric or public key (associated to the RS) o a key identifier; How these parameters are communicated depends on the type of key (asymmetric or symmetric). Moreover, the AS MUST signal the use of OSCOAP + EDHOC with the 'profile' parameter set to "coap_oscoap_edhoc" and follow Appendix A to derive the security context to run OSCOAP. Note that in the case described in this section, the 'expires_in' parameter, defined in section 4.2.2. of [RFC6749] defines the lifetime in seconds of both the access token and the shared secret. After expiration, C MUST acquire a new access token from the AS, and run EDHOC again, as specified in this section Seitz, et al. Expires April 18, 2018 [Page 9] Internet-Draft OSCOAP Profile of ACE October 2017 A.1. Using Asymmetric Keys In case of an asymmetric key, C MUST communicate its own asymmetric key to the AS in the 'cnf' parameter of the access token request, as specified in section 5.5.1 of [I-D.ietf-ace-oauth-authz]; the AS MUST communicate the RS's public key to C in the response, in the 'rs_cnf' parameter, as specified in section 5.5.1 of [I-D.ietf-ace-oauth-authz]. Note that the RS's public key MUST include a 'kid' parameter, and that the value of the 'kid' MUST be included in the access token, to let the RS know which of its public keys C used. If the access token is a CWT [I-D.ietf-ace-cbor-web-token], the key identifier MUST be placed directly in the 'cnf' structure (if the key is only referenced). Figure 3 shows an example of such a request in CBOR diagnostic notation without tag and value abbreviations. Header: POST (Code=0.02) Uri-Host: "server.example.com" Uri-Path: "token" Content-Type: "application/cose+cbor" Payload: { "grant_type" : "client_credentials", "cnf" : { "COSE_Key" : { "kid" : "client_key" "kty" : "EC", "crv" : "P-256", "x" : b64'usWxHK2PmfnHKwXPS54m0kTcGJ90UiglWiGahtagnv8', "y" : b64'IBOL+C3BttVivg+lSreASjpkttcsz+1rb7btKLv8EX4' } } } Figure 3: Example access token request (OSCOAP+EDHOC, asymmetric). Figure 4 shows an example of a corresponding response in CBOR diagnostic notation without tag and value abbreviations. Seitz, et al. Expires April 18, 2018 [Page 10] Internet-Draft OSCOAP Profile of ACE October 2017 Header: Created (Code=2.01) Content-Type: "application/cose+cbor" Payload: { "access_token" : b64'SlAV32hkKG ... (contains "kid" : "client_key")', "profile" : "coap_oscoap_edhoc", "expires_in" : "3600", "cnf" : { "COSE_Key" : { "kid" : "server_key" "kty" : "EC", "crv" : "P-256", "x" : b64'cGJ90UiglWiGahtagnv8usWxHK2PmfnHKwXPS54m0kT', "y" : b64'reASjpkttcsz+1rb7btKLv8EX4IBOL+C3BttVivg+lS' } } } Figure 4: Example AS response (EDHOC+OSCOAP, asymmetric). A.2. Using Symmetric Keys In the case of a symmetric key, the AS MUST communicate the key to the client in the 'cnf' parameter of the access token response, as specified in section 5.5.2. of [I-D.ietf-ace-oauth-authz]. AS MUST also select a key identifier, that MUST be included as the 'kid' parameter either directly in the 'cnf' structure, as in figure 4 of [I-D.ietf-ace-oauth-authz], or as the 'kid' parameter of the COSE_key, as in figure 6 of [I-D.ietf-ace-oauth-authz]. Figure 5 shows an example of the necessary parameters in the AS response to the access token request when EDHOC is used. The example uses CBOR diagnostic notation without tag and value abbreviations. Seitz, et al. Expires April 18, 2018 [Page 11] Internet-Draft OSCOAP Profile of ACE October 2017 Header: Created (Code=2.01) Content-Type: "application/cose+cbor" Payload: { "access_token" : b64'SlAV32hkKG ... (remainder of access token omitted for brevity)', "profile" : "coap_oscoap_edhoc", "expires_in" : "3600", "cnf" : { "COSE_Key" : { "kty" : "Symmetric", "kid" : b64'5tOS+h42dkw', "k" : b64'+a+Dg2jjU+eIiOFCa9lObw' } } } Figure 5: Example AS response (EDHOC+OSCOAP, symmetric). In both cases, the AS MUST also include the same key identifier as 'kid' parameter in the access token metadata. If the access token is a CWT [I-D.ietf-ace-cbor-web-token], the key identifier MUST be placed inside the 'cnf' claim as 'kid' parameter of the COSE_Key or directly in the 'cnf' structure (if the key is only referenced). Figure 6 shows an example CWT containing the necessary EDHOC+OSCOAP parameters in the 'cnf' claim, in CBOR diagnostic notation without tag and value abbreviations. { "aud" : "tempSensorInLivingRoom", "iat" : "1360189224", "exp" : "1360289224", "scope" : "temperature_g firmware_p", "cnf" : { "COSE_Key" : { "kty" : "Symmetric", "kid" : b64'5tOS+h42dkw', "k" : b64'+a+Dg2jjU+eIiOFCa9lObw' } } Figure 6: Example CWT with EDHOC+OSCOAP, symmetric case. All other parameters defining OSCOAP security context are derived from EDHOC message exchange, including the master secret (see Appendix C.2 of [I-D.selander-ace-cose-ecdhe]). Seitz, et al. Expires April 18, 2018 [Page 12] Internet-Draft OSCOAP Profile of ACE October 2017 A.3. Processing To provide forward secrecy and mutual authentication in the case of pre-shared keys, pre-established raw public keys or with X.509 certificates it is RECOMMENDED to use EDHOC [I-D.selander-ace-cose-ecdhe] to generate the keying material. EDHOC MUST be used as defined in Appendix C of [I-D.selander-ace-cose-ecdhe], with the following additions and modifications. The first EDHOC message is sent after the access token is posted to the /authz-info endpoint of the RS as specified in section 5.7.1 of [I-D.ietf-ace-oauth-authz]. Then the EDHOC message_1 is sent and the EDHOC protocol is initiated [I-D.selander-ace-cose-ecdhe]). Before the RS continues with the EDHOC protocol and responds to this token submission request, additional verifications on the access token are done: the RS SHALL process the access token according to [I-D.ietf-ace-oauth-authz]. If the token is valid then the RS continues processing EDHOC following Appendix C of [I-D.selander-ace-cose-ecdhe], otherwise it discontinues EDHOC and responds with the error code as specified in [I-D.ietf-ace-oauth-authz]. o In case the EDHOC verification fails, the RS MUST return an error response to the client with code 4.01 (Unauthorized). o If RS has an access token for C but not for the resource that C has requested, RS MUST reject the request with a 4.03 (Forbidden). o If RS has an access token for C but it does not cover the action C requested on the resource, RS MUST reject the request with a 4.05 (Method Not Allowed). o If all verifications above succeeds, further communication between client and RS is protected with OSCOAP, including the RS response to the OSCOAP request. In the case of EDHOC being used with symmetric keys, the protocol in section 5 of [I-D.selander-ace-cose-ecdhe] MUST be used. If the key is asymmetric, the RS MUST also use an asymmetric key for authentication. This key is known to the client through the access token response (see section 5.5.2 of the ACE framework). In this case the protocol in section 4 of [I-D.selander-ace-cose-ecdhe] MUST be used. Figure 7 illustrates the message exchanges for using OSCOAP+EDHOC (step C in figure 1 of [I-D.ietf-ace-oauth-authz]). Seitz, et al. Expires April 18, 2018 [Page 13] Internet-Draft OSCOAP Profile of ACE October 2017 Resource Client Server | | | | +--------->| Header: POST (Code=0.02) | POST | Uri-Path:"authz-info" | | Content-Type: application/cbor | | Payload: access token | | | | +--------->| Header: POST (Code=0.02) | POST | Uri-Path: "/.well-known/edhoc" | | Content-Type: application/edhoc | | Payload: EDHOC message_1 | | |<---------+ Header: 2.04 Changed | 2.04 | Content-Type: application/edhoc | | Payload: EDHOC message_2 | | +--------->| Header: POST (Code=0.02) | POST | Uri-Path: "/.well-known/edhoc" | | Content-Type: application/edhoc | | Payload: EDHOC message_3 | | |<---------+ Header: 2.04 Changed | 2.04 | | | start of protected communication | | +--------->| CoAP request + | OSCOAP | Object-Security option | request | | | |<---------+ CoAP response + | OSCOAP | Object-Security option | response | | | Figure 7: Access token and key establishment with EDHOC Appendix B. Profile Requirements This section lists the specifications on this profile based on the requirements on the framework, as requested in Appendix C. of [I-D.ietf-ace-oauth-authz]. o (Optional) discovery process of how the client finds the right AS for an RS it wants to send a request to: Not specified Seitz, et al. Expires April 18, 2018 [Page 14] Internet-Draft OSCOAP Profile of ACE October 2017 o communication protocol the client and the RS must use: CoAP o security protocol the client and RS must use: OSCOAP o how the client and the RS mutually authenticate: Implicitly by possession of a common OSCOAP security context o Content-format of the protocol messages: "application/cose+cbor" o proof-of-possession protocol(s) and how to select one; which key types (e.g. symmetric/asymmetric) supported: OSCOAP algorithms; pre-established symmetric keys o profile identifier: coap_oscoap o (Optional) how the RS talks to the AS for introspection: HTTP/CoAP (+ TLS/DTLS/OSCOAP) o how the client talks to the AS for requesting a token: HTTP/CoAP (+ TLS/DTLS/OSCOAP) o how/if the /authz-info endpoint is protected: Security protocol above o (Optional)other methods of token transport than the /authz-info endpoint: no Acknowledgments The author wishes to thank Jim Schaad, Goeran Selander and Marco Tiloca for the input on this memo. The error responses specified in Appendix A.3 were originally specified by Gerdes et al. in [I-D.gerdes-ace-dcaf-authorize]. Authors' Addresses Ludwig Seitz RISE SICS AB Scheelevagen 17 Lund 22370 SWEDEN Email: ludwig.seitz@ri.se Seitz, et al. Expires April 18, 2018 [Page 15] Internet-Draft OSCOAP Profile of ACE October 2017 Francesca Palombini Ericsson AB Farogatan 6 Kista SE-16480 Stockholm Sweden Email: francesca.palombini@ericsson.com Martin Gunnarsson RISE SICS AB Scheelevagen 17 Lund 22370 SWEDEN Email: martin.gunnarsson@ri.se Seitz, et al. Expires April 18, 2018 [Page 16]