Network Working Group J. Reschke Internet-Draft greenbytes Obsoletes: 2629 (if approved) October 15, 2014 Intended status: Informational Expires: April 18, 2015 The 'XML2RFC' version 2 Vocabulary draft-reschke-xml2rfc-12 Abstract This document defines the 'XML2RFC' version 2 vocabulary; an XML- based language used for writing RFCs and Internet-Drafts. Version 2 represents the current state of the vocabulary (as implemented by several tools and as used by the RFC Editor) around 2014. Editorial Note (To be removed by RFC Editor) Discussion of this draft takes place on the XML2RFC mailing list (xml2rfc@ietf.org), which has its home page at . Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on April 18, 2015. Copyright Notice Copyright (c) 2014 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Reschke Expires April 18, 2015 [Page 1] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Syntax Notation . . . . . . . . . . . . . . . . . . . . . 4 2. Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1. . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2.
. . . . . . . . . . . . . . . . . . . . . . . . 5 2.3. . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.5. . . . . . . . . . . . . . . . . . . . . . . . . 6 2.6. . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.7. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.8. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.9. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.10. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.11. . . . . . . . . . . . . . . . . . . . . . . . . 11 2.12. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.13. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.14. . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.15. . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.16. . . . . . . . . . . . . . . . . . . . . . . . 13 2.17.
. . . . . . . . . . . . . . . . . . . . . . . . . 13 2.18. . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.19. . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.20. . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.21. . . . . . . . . . . . . . . . . . . . . . . . . 17 2.22. . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.23. . . . . . . . . . . . . . . . . . . . . . . . . . 19 2.24. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.25. . . . . . . . . . . . . . . . . . . . . . . 20 2.26. . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.27. . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.28. . . . . . . . . . . . . . . . . . . . . . . . 21 2.29. . . . . . . . . . . . . . . . . . . . . . . . . 22 2.30. . . . . . . . . . . . . . . . . . . . . . . . 22 2.31. . . . . . . . . . . . . . . . . . . . . . . . 23 2.32. . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.33. . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2.34.
. . . . . . . . . . . . . . . . . . . . . . . . 27 2.35. . . . . . . . . . . . . . . . . . . . . . . . 28 2.36. . . . . . . . . . . . . . . . . . . . . . . . . . 29 2.37. . . . . . . . . . . . . . . . . . . . . . . . . . 30 Reschke Expires April 18, 2015 [Page 2] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.38. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2.39. . . . . . . . . . . . . . . . . . . . . . . . 31 2.40. . . . . . . . . . . . . . . . . . . . . . . . . . 32 2.41. <ttcol> . . . . . . . . . . . . . . . . . . . . . . . . . 33 2.42. <uri> . . . . . . . . . . . . . . . . . . . . . . . . . . 33 2.43. <vspace> . . . . . . . . . . . . . . . . . . . . . . . . . 34 2.44. <workgroup> . . . . . . . . . . . . . . . . . . . . . . . 34 2.45. <xref> . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3. Escaping for Use in XML . . . . . . . . . . . . . . . . . . . 36 4. Special Unicode Code Points . . . . . . . . . . . . . . . . . 36 5. Including Files . . . . . . . . . . . . . . . . . . . . . . . 37 6. Internationalization Considerations . . . . . . . . . . . . . 38 7. Security Considerations . . . . . . . . . . . . . . . . . . . 38 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 39 8.1. Internet Media Type Registration . . . . . . . . . . . . . 39 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 40 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 40 10.1. Normative References . . . . . . . . . . . . . . . . . . . 40 10.2. Informative References . . . . . . . . . . . . . . . . . . 40 Appendix A. Front Page Generation . . . . . . . . . . . . . . . . 43 A.1. The /rfc/@category Attribute . . . . . . . . . . . . . . . 43 A.2. The /rfc/@ipr Attribute . . . . . . . . . . . . . . . . . 43 A.2.1. Current Values: '*trust200902' . . . . . . . . . . . . 43 A.2.2. Historic Values . . . . . . . . . . . . . . . . . . . 45 Appendix B. Changes from RFC 2629 ('v1') . . . . . . . . . . . . 46 B.1. Removed Elements . . . . . . . . . . . . . . . . . . . . . 46 B.2. Changed Defaults . . . . . . . . . . . . . . . . . . . . . 46 B.3. Changed Elements . . . . . . . . . . . . . . . . . . . . . 46 B.4. New Elements . . . . . . . . . . . . . . . . . . . . . . . 47 Appendix C. Relax NG Schema . . . . . . . . . . . . . . . . . . . 47 C.1. Checking Validity . . . . . . . . . . . . . . . . . . . . 53 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Reschke Expires April 18, 2015 [Page 3] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 1. Introduction This document describes version 2 ("v2") of the 'XML2RFC' vocabulary; an XML-based language ('Extensible Markup Language', [XML]) used for writing RFCs ([RFC7322]) and Internet-Drafts ([IDGUIDE]). Version 2 represents the current state of the vocabulary (as implemented by several tools and as used by the RFC Editor) around 2014. It obsoletes the original version ("v1") [RFC2629], which contained the original language definition, and which was subsequently extended. Many of the changes leading to version 2 have been described in "Writing I-Ds and RFCs using XML (revised)" ([V1rev]), but that document has not been updated since 2008. Processing Instructions (Section 2.6 of [XML]) generally are specific to a given processor, and thus are not considered to be part of the vocabulary. See Section 4.1 of [TCLReadme] for a list of the processing instructions supported by the first implementation of an xml2rfc processor. Note that the vocabulary contains certain constructs that might not be used when generating the final text; however, they can provide useful data for other uses (such index generation, populating a keyword database, or syntax checks). 1.1. Syntax Notation The XML vocabulary here is defined in prose, based on the Relax NG schema ([RNC]) contained in Appendix C (specified in Relax NG Compact Notation, "RNC"). Note that the schema can be used for automated validity checks, but certain constraints are only described in prose (example: the conditionally required presence of the "abbrev" attribute). 2. Elements The sections below describe all elements and their attributes. Note that attributes not labeled "mandatory" are optional. Except inside <artwork>, horizontal whitespace and linebreaks are collapsed into a single whitespace, and leading and trailing whitespace are trimmed off. Reschke Expires April 18, 2015 [Page 4] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.1. <abstract> Contains the abstract of the document. The abstract ought to be self-contained and thus should not contain references or unexpanded abbreviations. See Section 4.3 of [RFC7322] for more information. This element appears as a child element of: <front> (Section 2.19). Content model: One or more <t> elements (Section 2.38) 2.2. <address> Provides address information for the author. This element appears as a child element of: <author> (Section 2.6). Content model: In this order: 1. One optional <postal> element (Section 2.27) 2. One optional <phone> element (Section 2.26) 3. One optional <facsimile> element (Section 2.16) 4. One optional <email> element (Section 2.14) 5. One optional <uri> element (Section 2.42) 2.3. <annotation> Provides additional prose augmenting a bibliographical reference. This element appears as a child element of: <reference> (Section 2.30). Content model: In any order: o Text o <xref> elements (Section 2.45) Reschke Expires April 18, 2015 [Page 5] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 o <eref> elements (Section 2.15) o <iref> elements (Section 2.20) o <cref> elements (Section 2.12) o <spanx> elements (Section 2.36) 2.4. <area> Provides information about the IETF area to which this document relates (currently not used when generating documents). The value ought to be either the full name or the abbreviation of one of the IETF areas as listed on <http://www.ietf.org/iesg/area.html>. The list at the time that this document is being published is: "Applications", "app", "General", "gen", "Internet", "int", "Operations and Management", "ops", "Real-time Applications and Infrastructure", "rai", "Routing", "rtg", "Security", "sec", "Transport", "tsv". This element appears as a child element of: <front> (Section 2.19). Content model: only text content. 2.5. <artwork> This element allows the inclusion of "artwork" into the document. <artwork> is the only element in the vocabulary that provides full control of horizontal whitespace and line breaks, and thus is used for a variety of things, such as: o diagrams ("line art"), o source code, o formal languages (such as ABNF or the RNC notation used in this document), o message flow diagrams, o complex tables, or o protocol unit diagrams. Alternatively, the "src" attribute allows referencing an external graphics file, such as a bitmap or a vector drawing, using a URI Reschke Expires April 18, 2015 [Page 6] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 ("Uniform Resource Identifier", [RFC3986]). In this case, the textual content acts as fallback for output formats that do not support graphics, and thus ought to contain either a "line art" variant of the graphics, or otherwise prose that describes the included image in sufficient detail. Note that RFCs occasionally are published with enhanced diagrams; a recent example is [RFC5598]. This element appears as a child element of: <figure> (Section 2.17). Content model: Text 2.5.1. 'align' attribute Controls whether the artwork appears left justified (default), centered, or right justified. Allowed values: o "left" (default) o "center" o "right" 2.5.2. 'alt' attribute Alternative text description of the artwork (not just the caption). 2.5.3. 'height' attribute The suggested height of the graphics included using the "src" attribute. This attribute is format-dependent and ought to be avoided. When generating HTML output, current implementations copy the attribute "as is". For other output formats it is usually ignored. 2.5.4. 'name' attribute A filename suitable for the contents (such as for extraction to a local file). This attribute generally isn't used for document generation, but it can be helpful for other kinds of tools (such as automated syntax checkers which work by extracting the source code). Reschke Expires April 18, 2015 [Page 7] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.5.5. 'src' attribute The URI reference of a graphics file ([RFC3986], Section 4.1). Note that this can be a "data" URI ([RFC2397]) as well; in which case the graphics file is wholly part of the XML file. 2.5.6. 'type' attribute Specifies the type of the artwork. The value either is an Internet Media Type (see [RFC2046]) or a keyword (such as "abnf"). The set of recognized keywords varies across implementations. How it is used depends on context and application. For instance, a formatter can attempt to syntax-highlight code in certain known languages. 2.5.7. 'width' attribute The suggested width of the graphics included using the "src" attribute. This attribute is format-dependent and ought to be avoided. When generating HTML output, current implementations copy the attribute "as is". For other output formats it is usually ignored. 2.5.8. 'xml:space' attribute Determines whitespace handling. "preserve" is both the default value and the only meaningful setting anyway (because that's what the <artwork> element is for). See also Section 2.10 of [XML]. Allowed values: o "default" o "preserve" (default) Reschke Expires April 18, 2015 [Page 8] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.6. <author> Provides information about a document's author. This is used both for the document itself (at the beginning of the document) and for referenced documents (inside of <reference>). The <author> elements contained within the document's <front> element are used to fill the boilerplate, and also to generate the "Author's Address" section (see Section 4.12 of [RFC7322]). Note that an "author" can also be just an organization (by not specifying any of the name attributes, but adding the <organization> child element). Furthermore, the "role" attribute can be used to mark an author as "editor". This is reflected both on the front page and in bibliographical references. Note that this specification does not define a precise meaning for the term "editor". See Section "Authors vs. Contributors" of [RFCPOLICY] for more information. This element appears as a child element of: <front> (Section 2.19). Content model: In this order: 1. One optional <organization> element (Section 2.25) 2. One optional <address> element (Section 2.2) 2.6.1. 'fullname' attribute The full name (used in the automatically generated "Author's Address" section). 2.6.2. 'initials' attribute Author initials (used on the front page and in references). Initials should be provided as a whitespace separated list of pairs of a letter and a dot. 2.6.3. 'role' attribute Specifies the role the author had in creating the document. Reschke Expires April 18, 2015 [Page 9] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 Allowed values: o "editor" 2.6.4. 'surname' attribute The author's surname (used on the front page and in references). 2.7. <back> Contains the "back" part of the document: the references and appendices. In <back>, <section> elements indicate appendices. This element appears as a child element of: <rfc> (Section 2.33). Content model: In this order: 1. Optional <references> elements (Section 2.31) 2. Optional <section> elements (Section 2.34) 2.8. <c> Provides the content of a cell in a table. This element appears as a child element of: <texttable> (Section 2.39). Content model: In any order: o Text o <xref> elements (Section 2.45) o <eref> elements (Section 2.15) o <iref> elements (Section 2.20) o <cref> elements (Section 2.12) o <spanx> elements (Section 2.36) Reschke Expires April 18, 2015 [Page 10] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.9. <city> Gives the city name in a postal address. This element appears as a child element of: <postal> (Section 2.27). Content model: only text content. 2.10. <code> Gives the postal region code. This element appears as a child element of: <postal> (Section 2.27). Content model: only text content. 2.11. <country> Gives the country in a postal address. This element appears as a child element of: <postal> (Section 2.27). Content model: only text content. 2.12. <cref> Represents a comment. Comments can be used in a document while it is work-in-progress. They usually appear either inline and visually highlighted, at the end of the document (depending on file format and settings of the formatter), or not at all (when generating an RFC). This element appears as a child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38). Content model: only text content. 2.12.1. 'anchor' attribute Document-wide unique identifier for this comment. The processor will auto-generate an identifier when none is given. The value needs to be a valid XML "Name" (Section 2.3 of [XML]), additionally constrained to US-ASCII characters ([USASCII]). Reschke Expires April 18, 2015 [Page 11] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.12.2. 'source' attribute Holds the "source" of a comment, such as the name or the initials of the person who made the comment. 2.13. <date> Provides information about the publication date. Note that this element is used both for the boilerplate of the document being produced, and also inside bibliographic references. In the boilerplate case, it defines the publication date, which, when producing Internet-Drafts, will be used for computing the expiration date (see Section 8 of [IDGUIDE]). When one or more of "year", "month", or "day" are left out, the processor will attempt to use the current system date if the attributes that are present are consistent with that date. Note that in this case, month names need to match the full (English) month name ("January", "February", "March", "April", "May, "June", "July", "August", "September", "October", "November", or "December") in order for expiration calculations to work (some implementations might support additional formats, though). In the case of bibliographic references, the date information can have prose text for the month or year. For example, vague dates (year="ca. 2000"), date ranges (year="2012-2013"), non-specific months (month="Second quarter") and so on, are allowed. This element appears as a child element of: <front> (Section 2.19). Content model: this element does not have any contents. 2.13.1. 'day' attribute Day of publication; this is a number. 2.13.2. 'month' attribute Month of publication; this is the English name of the month. 2.13.3. 'year' attribute Year of publication. Reschke Expires April 18, 2015 [Page 12] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.14. <email> Provides an email address. The value is expected to be the scheme-specific part of a "mailto" URI (so does not include the prefix "mailto:"). See Section 2 of [RFC6068] for details. This element appears as a child element of: <address> (Section 2.2). Content model: only text content. 2.15. <eref> Represents an "external" link (as specified in the "target" attribute). If the element has text content, that content will be used. Otherwise, the value of the target attribute will be inserted in angle brackets ([RFC3986], Appendix C). This element appears as a child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38). Content model: only text content. 2.15.1. 'target' attribute (mandatory) URI of the link target (see Section 3 of [RFC3986]). 2.16. <facsimile> Represents the phone number of a fax machine. The value is expected to be the scheme-specific part of a "tel" URI (so does not include the prefix "tel:"), using the "global numbers" syntax. See Section 3 of [RFC3966] for details. This element appears as a child element of: <address> (Section 2.2). Content model: only text content. 2.17. <figure> This element is used to represent a figure, consisting of an optional preamble, the actual figure, an optional postamble, and an optional title. Reschke Expires April 18, 2015 [Page 13] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 This element appears as a child element of: <section> (Section 2.34), and <t> (Section 2.38). Content model: In this order: 1. Optional <iref> elements (Section 2.20) 2. One optional <preamble> element (Section 2.29) 3. One <artwork> element (Section 2.5) 4. One optional <postamble> element (Section 2.28) 2.17.1. 'align' attribute Used to change the alignment of <preamble> and <postamble>. Note: does not affect title or <artwork> alignment. Allowed values: o "left" (default) o "center" o "right" 2.17.2. 'alt' attribute Duplicates functionality available on <artwork>; avoid it. 2.17.3. 'anchor' attribute Document-wide unique identifier for this figure. Furthermore, the presence of this attribute causes the figure to be numbered. The value needs to be a valid XML "Name" (Section 2.3 of [XML]). 2.17.4. 'height' attribute Duplicates functionality available on <artwork>; avoid it. Reschke Expires April 18, 2015 [Page 14] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.17.5. 'src' attribute Duplicates functionality available on <artwork>; avoid it. 2.17.6. 'suppress-title' attribute Figures that have an "anchor" attribute will automatically get an autogenerated title (such as "Figure 1"), even if the "title" attribute is absent. Setting this attribute to "true" will prevent this. Allowed values: o "true" o "false" (default) 2.17.7. 'title' attribute The title for the figure; this usually appears on a line after the figure. 2.17.8. 'width' attribute Duplicates functionality available on <artwork>; avoid it. 2.18. <format> Provides a link to an additional format variant for a reference. Note that these additional links are neither used in published RFCs, nor supported by all tools. If the goal is to provide a single URI for a reference, the "target" attribute on <reference> can be used instead. This element appears as a child element of: <reference> (Section 2.30). Content model: this element does not have any contents. 2.18.1. 'octets' attribute Octet length of linked-to document. 2.18.2. 'target' attribute URI of document. Reschke Expires April 18, 2015 [Page 15] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.18.3. 'type' attribute (mandatory) The type of the linked-to document, such as "TXT", "HTML", or "PDF". 2.19. <front> Represent the "front matter": metadata (such as author information), abstract, and additional notes. This element appears as a child element of: <reference> (Section 2.30), and <rfc> (Section 2.33). Content model: In this order: 1. One <title> element (Section 2.40) 2. One or more <author> elements (Section 2.6) 3. One <date> element (Section 2.13) 4. Optional <area> elements (Section 2.4) 5. Optional <workgroup> elements (Section 2.44) 6. Optional <keyword> elements (Section 2.21) 7. One optional <abstract> element (Section 2.1) 8. Optional <note> elements (Section 2.24) 2.20. <iref> Provides terms for the document's index. Index entries can be either single items (when just the "item" attribute is given) or nested items (by specifying "subitem" as well). This element appears as a child element of: <annotation> (Section 2.3), <c> (Section 2.8), <figure> (Section 2.17), <postamble> (Section 2.28), <preamble> (Section 2.29), <section> (Section 2.34), and <t> (Section 2.38). Content model: this element does not have any contents. Reschke Expires April 18, 2015 [Page 16] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.20.1. 'item' attribute (mandatory) The item to include. 2.20.2. 'primary' attribute Setting this to "true" declares the occurrence as "primary", which might cause it to be highlighted in the index. Allowed values: o "true" o "false" (default) 2.20.3. 'subitem' attribute The subitem to include. 2.21. <keyword> Specifies a keyword applicable to the document. Note that each element should only contain a single keyword; for multiple keywords, the element can simply be repeated. Keywords are used both in the RFC Index and in the metadata of generated documents. This element appears as a child element of: <front> (Section 2.19). Content model: only text content. 2.22. <list> Delineates a text list. Each list item is represented by a <t> element. The vocabulary currently does not directly support list items consisting of multiple paragraphs; if this is needed, <vspace> (Section 2.43) can be used as a workaround. This element appears as a child element of: <t> (Section 2.38). Content model: One or more <t> elements (Section 2.38) Reschke Expires April 18, 2015 [Page 17] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.22.1. 'counter' attribute This attribute holds a token that serves as an identifier for a counter. The intended use is continuation of lists, where the counter will be incremented for every list item, and there is no way to reset the counter. Note that this attribute functions only when the style attribute is using the "format..." syntax (Section 2.22.3); otherwise, it is ignored. 2.22.2. 'hangIndent' attribute For list styles with potentially wide labels, this attribute can override the default indentation level, measured in number of characters. Note that it only affects style with variable-width labels ("format..." and "hanging", see below), and it may not affect formats in which the list item text appears _below_ the label. 2.22.3. 'style' attribute This attribute is used to control the display of a list. The value of this attribute is inherited by any nested lists that do not have this attribute set. It may be set to: "empty" For unlabeled list items; it can also be used for indentation purposes (this is the default value when there is an enclosing list where the style is specified). "hanging" For lists where the items are labeled with a piece of text. The label text is specified in the 'hangText' attribute of the <t> element (Section 2.38.2). "letters" For ordered lists using letters as labels (lowercase letters followed by a period; after "z", it rolls over to a two-letter format). For nested lists, processors usually flip between uppercase and lowercase. Reschke Expires April 18, 2015 [Page 18] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 "numbers" For ordered lists using numbers as labels. "symbols" For unordered (bulleted) lists. The style of the bullets is chosen automatically be the processor (some implementations allow overriding the default using a processing instruction). And, finally: "format ..." For lists with customized labels, consisting of fixed text and an item counter in various formats. The value is a free-form text that allows counter values to be inserted using a "percent-letter" format. For instance, "[REQ%d]" generates labels of the form "[REQ1]", where "%d" inserts the item number as decimal number. The following formats are supported: %c lowercase letters (a, b, c, etc.) %C uppercase letters (A, B, C, etc.) %d decimal numbers (1, 2, 3, etc.) %i lowercase Roman numerals (i, ii, iii, etc.) %I uppercase Roman numerals (I, II, III, etc.) %% represents a percent sign Other formats are reserved for future use. 2.23. <middle> Represents the main content of the document. This element appears as a child element of: <rfc> (Section 2.33). Reschke Expires April 18, 2015 [Page 19] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 Content model: One or more <section> elements (Section 2.34) 2.24. <note> Creates an unnumbered section that appears after the abstract. It is usually used for additional information to reviewers (working group information, mailing list, ...), or for additional publication information such as "IESG Notes". This element appears as a child element of: <front> (Section 2.19). Content model: One or more <t> elements (Section 2.38) 2.24.1. 'title' attribute (mandatory) The title of the note. 2.25. <organization> Specifies the affiliation of an author. This information appears in both the "Author's Address" section and on the front page (see [RFC7322], Section 4.1.1 for more information). If the value is long, an abbreviated variant can be specified in the "abbrev" attribute. This element appears as a child element of: <author> (Section 2.6). Content model: only text content. 2.25.1. 'abbrev' attribute Abbreviated variant. 2.26. <phone> Represents a phone number. The value is expected to be the scheme-specific part of a "tel" URI (so does not include the prefix "tel:"), using the "global numbers" syntax. See Section 3 of [RFC3966] for details. This element appears as a child element of: <address> (Section 2.2). Reschke Expires April 18, 2015 [Page 20] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 Content model: only text content. 2.27. <postal> Contains child elements providing postal information. This element appears as a child element of: <address> (Section 2.2). Content model: In this order: 1. One or more <street> elements (Section 2.37) 2. In any order: * <city> elements (Section 2.9) * <region> elements (Section 2.32) * <code> elements (Section 2.10) * <country> elements (Section 2.11) 2.28. <postamble> Gives text that appears at the bottom of a figure or table. This element appears as a child element of: <figure> (Section 2.17), and <texttable> (Section 2.39). Content model: In any order: o Text o <xref> elements (Section 2.45) o <eref> elements (Section 2.15) o <iref> elements (Section 2.20) o <cref> elements (Section 2.12) o <spanx> elements (Section 2.36) Reschke Expires April 18, 2015 [Page 21] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.29. <preamble> Gives text that appears at the top of a figure or table. This element appears as a child element of: <figure> (Section 2.17), and <texttable> (Section 2.39). Content model: In any order: o Text o <xref> elements (Section 2.45) o <eref> elements (Section 2.15) o <iref> elements (Section 2.20) o <cref> elements (Section 2.12) o <spanx> elements (Section 2.36) 2.30. <reference> Represents a bibliographical reference. This element appears as a child element of: <references> (Section 2.31). Content model: In this order: 1. One <front> element (Section 2.19) 2. Optional <seriesInfo> elements (Section 2.35) 3. Optional <format> elements (Section 2.18) 4. Optional <annotation> elements (Section 2.3) 2.30.1. 'anchor' attribute (mandatory) Document-wide unique identifier for this reference. Usually, this will be used both to "label" the reference in the references section, and as an identifier in links to this reference entry. Reschke Expires April 18, 2015 [Page 22] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 The value needs to be a valid XML "Name" (Section 2.3 of [XML]), additionally constrained to US-ASCII characters ([USASCII]). 2.30.2. 'target' attribute Holds the URI for the reference. Note that depending on the <seriesInfo> element, a URI might not be needed, nor desirable, as it can be automatically generated (for instance, for RFCs). 2.31. <references> Contains a set of bibliographical references. In the early days of the RFC series, there was only one "References" section per RFC. This convention was later changed to group references into two sets, "Normative" and "Informative" as described in Section 4.8.6 of [RFC7322]). This vocabulary supports the split with the "title" attribute. By default, the order of references is significant. Processors however can be instructed to sort them based on their anchor names. This element appears as a child element of: <back> (Section 2.7). Content model: One or more <reference> elements (Section 2.30) 2.31.1. 'title' attribute Provides the title for the References section (defaulting to "References"). In general, the title should be either "Normative References" or "Informative References". 2.32. <region> Provides the region name in a postal address. This element appears as a child element of: <postal> (Section 2.27). Content model: only text content. Reschke Expires April 18, 2015 [Page 23] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.33. <rfc> This is the root element of the xml2rfc vocabulary. Processors distinguish between RFC mode ("number" attribute being present) and Internet-Draft mode ("docName" attribute being present): it is invalid to specify both. Setting neither "number" nor "docName" can be useful for producing other types of document but is out-of-scope for this specification. Content model: In this order: 1. One <front> element (Section 2.19) 2. One <middle> element (Section 2.23) 3. One optional <back> element (Section 2.7) 2.33.1. 'category' attribute Document category (see Appendix A.1). Allowed values: o "std" o "bcp" o "info" o "exp" o "historic" 2.33.2. 'consensus' attribute Affects the generated boilerplate. See [RFC5741] for more information. Allowed values: o "no" o "yes" Reschke Expires April 18, 2015 [Page 24] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.33.3. 'docName' attribute For Internet-Drafts, this specifies the draft name (which appears below the title). A processor should give an error if both the "docName" and "number" attributes are given in the <rfc> element. Note that the file extension is not part of the draft, so in general it should end with the current draft number ("-", plus two digits). Furthermore, it is good practice to disambiguate current editor copies from submitted drafts (for instance, by replacing the draft number with the string "latest"). See Section 7 of [IDGUIDE] for further information. 2.33.4. 'ipr' attribute Represents the Intellectual Property status of the document. See Appendix A.2 for details. Allowed values: o "full2026" o "noDerivativeWorks2026" o "none" o "full3667" o "noModification3667" o "noDerivatives3667" o "full3978" o "noModification3978" o "noDerivatives3978" o "trust200811" o "noModificationTrust200811" o "noDerivativesTrust200811" Reschke Expires April 18, 2015 [Page 25] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 o "trust200902" o "noModificationTrust200902" o "noDerivativesTrust200902" o "pre5378Trust200902" 2.33.5. 'iprExtract' attribute Identifies a single section within the document (by its 'anchor' attribute) for which extraction "as-is" is explicitly allowed (this is only relevant for historic values of the "ipr" attribute). 2.33.6. 'number' attribute The number of the RFC to be produced. A processor should give an error if both the "docName" and "number" attributes are given in the <rfc> element. 2.33.7. 'obsoletes' attribute A comma-separated list of RFC _numbers_ or Internet-Draft names. Processors ought to parse the attribute value, so that incorrect references can be detected and, depending on output format, hyperlinks can be generated. Also, the value ought to be reformatted to insert whitespace after each comma if not already present. 2.33.8. 'seriesNo' attribute When producing a document within document series (such as "STD"): the number within that series. 2.33.9. 'submissionType' attribute The document stream. See Section 2 of [RFC5741] for details. Allowed values: o "IETF" (default) o "IAB" Reschke Expires April 18, 2015 [Page 26] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 o "IRTF" o "independent" 2.33.10. 'updates' attribute A comma-separated list of RFC _numbers_ or Internet-Draft names. Processors ought to parse the attribute value, so that incorrect references can be detected and, depending on output format, hyperlinks can be generated. Also, the value ought to be reformatted to insert whitespace after each comma if not already present. 2.33.11. 'xml:lang' attribute The natural language used in the document (defaults to "en"). See Section 2.12 of [XML] for more information. 2.34. <section> Represents a section (when inside a <middle> element) or an appendix (when inside a <back> element). Sub-sections are created by nesting <section> elements inside <section> elements. This element appears as a child element of: <back> (Section 2.7), <middle> (Section 2.23), and <section> (Section 2.34). Content model: In this order: 1. In any order: * <t> elements (Section 2.38) * <figure> elements (Section 2.17) * <texttable> elements (Section 2.39) * <iref> elements (Section 2.20) 2. Optional <section> elements (Section 2.34) Reschke Expires April 18, 2015 [Page 27] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.34.1. 'anchor' attribute Document-wide unique identifier for this section. The value needs to be a valid XML "Name" (Section 2.3 of [XML]). 2.34.2. 'title' attribute (mandatory) The title of the section. 2.34.3. 'toc' attribute Determines whether the section is included in the Table Of Contents. The processor usually has defaults for whether a Table Of Contents will be produced at all, and sections of which maximal depth will be included (frequently: 3). "include" and "exclude" allow overriding the processor's default behavior for the element they are specified on (they do not affect nested elements). Allowed values: o "include" o "exclude" o "default" (default) 2.35. <seriesInfo> Specifies the document series in which this document appears, and also specifies an identifier within that series. This element appears as a child element of: <reference> (Section 2.30). Content model: this element does not have any contents. 2.35.1. 'name' attribute (mandatory) The name of the series. The following names trigger specific processing (such as for auto- generating links, and adding descriptions such as "work in progress"): "BCP", "FYI", "Internet-Draft", "RFC", and "STD". Reschke Expires April 18, 2015 [Page 28] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.35.2. 'value' attribute (mandatory) The identifier within the series specified by the "name" attribute. For BCPs, FYIs, RFCs, and STDs this is the number within the series. For Internet-Drafts, it is the full draft name (ending with the two- digit version number). 2.36. <spanx> Wraps a piece of text, indicating special formatting styles. When generating plain text, processors usually emulate font changes using characters such as "*" and "_". The following styles are defined: emph Simple emphasis (this is the default). strong Strong emphasis. verb "Verbatim" text (usually displayed using a monospaced font face). This element appears as a child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38). Content model: only text content. 2.36.1. 'style' attribute The style to be used (defaults to "emph"). 2.36.2. 'xml:space' attribute Determines whitespace handling. According to the DTD, the default value is "preserve". Tests however show that it doesn't have any effect on processing; thus this attribute will be removed in future versions of the vocabulary. See also Section 2.10 of [XML]. Allowed values: o "default" Reschke Expires April 18, 2015 [Page 29] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 o "preserve" (default) 2.37. <street> Provides a street address. This element appears as a child element of: <postal> (Section 2.27). Content model: only text content. 2.38. <t> Contains a paragraph of text. This element appears as a child element of: <abstract> (Section 2.1), <list> (Section 2.22), <note> (Section 2.24), and <section> (Section 2.34). Content model: In any order: o Text o <list> elements (Section 2.22) o <figure> elements (Section 2.17) o <xref> elements (Section 2.45) o <eref> elements (Section 2.15) o <iref> elements (Section 2.20) o <cref> elements (Section 2.12) o <spanx> elements (Section 2.36) o <vspace> elements (Section 2.43) 2.38.1. 'anchor' attribute Document-wide unique identifier for this paragraph. The value needs to be a valid XML "Name" (Section 2.3 of [XML]). Reschke Expires April 18, 2015 [Page 30] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.38.2. 'hangText' attribute Holds the label ("hanging text") for items in lists using the "hanging" style (see Section 2.22.3). 2.39. <texttable> Contains a table, consisting of an optional preamble, a header line, rows, an optional postamble, and an optional title. The number of columns in the table is determined by the number of <ttcol> elements. The number of rows in the table is determined by the number of <c> elements divided by the number of columns. There is no requirement that the number of <c> elements be evenly divisible by the number of columns. This element appears as a child element of: <section> (Section 2.34). Content model: In this order: 1. One optional <preamble> element (Section 2.29) 2. One or more <ttcol> elements (Section 2.41) 3. Optional <c> elements (Section 2.8) 4. One optional <postamble> element (Section 2.28) 2.39.1. 'align' attribute Determines the horizontal alignment of the table. Allowed values: o "left" o "center" (default) o "right" 2.39.2. 'anchor' attribute Document-wide unique identifier for this table. Furthermore, the presence of this attribute causes the table to be numbered. Reschke Expires April 18, 2015 [Page 31] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 The value needs to be a valid XML "Name" (Section 2.3 of [XML]). 2.39.3. 'style' attribute Selects which borders should be drawn, where o "all" means borders around all table cells, o "full" is like "all" except no horizontal lines between table rows (except below the column titles), o "headers" adds just a separator between column titles and rows, and o "none" means no borders at all. Allowed values: o "all" o "none" o "headers" o "full" (default) 2.39.4. 'suppress-title' attribute Tables that have an "anchor" attribute will automatically get an autogenerated title (such as "Table 1"), even if the "title" attribute is absent. Setting this attribute to "true" will prevent this. Allowed values: o "true" o "false" (default) 2.39.5. 'title' attribute The title for the table; this usually appears on a line below the table body. 2.40. <title> Represents the document title. Reschke Expires April 18, 2015 [Page 32] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 When this element appears in the <front> element of the current document, the title might also appear in page headers or footers. If it's long (~40 characters), the "abbrev" attribute is used to specify an abbreviated variant. This element appears as a child element of: <front> (Section 2.19). Content model: only text content. 2.40.1. 'abbrev' attribute Specifies an abbreviated variant of the document title. 2.41. <ttcol> Contains a column heading in a table. This element appears as a child element of: <texttable> (Section 2.39). Content model: only text content. 2.41.1. 'align' attribute Determines the horizontal alignment within the table column. Allowed values: o "left" (default) o "center" o "right" 2.41.2. 'width' attribute The desired column width (as integer 0..100 followed by "%"). 2.42. <uri> Contains a web address associated with the author. The contents should be a valid URI (see Section 3 of [RFC3986]). This element appears as a child element of: <address> (Section 2.2). Content model: only text content. Reschke Expires April 18, 2015 [Page 33] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 2.43. <vspace> This element can be used to force the inclusion of a single line break or multiple blank lines. Note that this is a purely presentational element and thus its use ought to be avoided. This element appears as a child element of: <t> (Section 2.38). Content model: this element does not have any contents. 2.43.1. 'blankLines' attribute Number of blank lines to be inserted, where "0" indicates a single line break (defaults to "0"). For paged output formats, no additional blank lines should be generated after a page break. 2.44. <workgroup> This element is used to specify the Working Group (IETF) or Research Group (IRTF) from which the document originates, if any. The recommended format is the official name of the Working Group (with some capitalization). In Internet-Drafts, this is used in the upper left corner of the boilerplate, replacing the "Network Working Group" string. Formatting software can append the words "Working Group" or "Research Group", depending on the "submissionType" property on the <rfc> element (Section 2.33.9). This element appears as a child element of: <front> (Section 2.19). Content model: only text content. 2.45. <xref> Inserts a reference to a different part of a document. The generated text depends on whether the <xref> is empty (in which case the processor will try to generate a meaningful text fragment), and the nature of the referenced document part. Any element that allows the "anchor" attribute can be referenced; however there are restrictions with respect to the text content being generated. For instance, a <t> can be a reference target, however, Reschke Expires April 18, 2015 [Page 34] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 because paragraphs are not (visibly) numbered, the author will have to make sure that the prose is sufficient for a reader to understand what is being referred to. [[anchor2: This needs to be expanded with examples and with a discussion how the autogenerated text differs when <xref> is not empty]] This element appears as a child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38). Content model: only text content. 2.45.1. 'format' attribute This attribute is used to control the format of the generated reference text. "counter" Inserts a counter, such as the number of a section, figure, or table. "default" Inserts a text fragment that describes the referenced part completely, such as "Section 2", "Table 4", or "[XML]". "none" There will be no auto-generated text. "title" Inserts a title for the referenced element (usually obtained from the referenced element's "title" attribute; some processors also use the <title> child element or a <reference> target). Allowed values: o "counter" o "title" o "none" Reschke Expires April 18, 2015 [Page 35] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 o "default" (default) 2.45.2. 'pageno' attribute Unused. It's unclear what the purpose of this attribute is; processors seem to ignore it and it never was documented. Allowed values: o "true" o "false" (default) 2.45.3. 'target' attribute (mandatory) Identifies the document component being referenced. The value needs to match the value of the "anchor" attribute of another element in the document. 3. Escaping for Use in XML Text in XML cannot use the literal characters "<" and "&", as they have special meaning to the XML processor (starting entities, elements, etc.). Usually, these characters will need to be substituted by "<" and "&" (see Section 4.6 of [XML]). ">" does not require escaping, unless it appears in the sequence "]]>" (which indicates the end of a CDATA section, see below). Escaping the individual characters can be a lot of work (when done manually), and also messes up alignment in artwork. Another approach to escaping is to use CDATA sections ([XML], Section 2.7). Within these, no further escaping is needed, except when the "end-of-CDATA" marker needs to be used (in that case, the CDATA section needs to be closed, and a new one needs to be started). 4. Special Unicode Code Points Although the current RFC format does not allow non-ASCII Unicode characters ([UNICODE]), some of them can be used to enforce certain behaviors of formatters. For instance: non-breaking space (U+00A0) Reschke Expires April 18, 2015 [Page 36] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 Represents a space character where no line break should happen. This is frequently used in titles (by excluding certain space characters from the line breaking algorithm, the processor will use the remaining whitespace occurrences for line breaks). non-breaking hyphen (U+2011) Similarly, this represents a hyphen character where nevertheless no line breaking ought to occur. word joiner (U+2060) Also called "zero width non-breaking space" -- can be used to disallow line breaking between two non-whitespace characters. Note that in order to use these characters by name, they need to be declared either in the Document Type Definition (DTD, [XML], Section 2.9), or in the "internal subset" ([XML], Section 2.8), like this: <?xml version="1.0"?> <!DOCTYPE rfc [ <!-- declare nbsp and friends --> <!ENTITY nbsp " "> <!ENTITY nbhy "‑"> <!ENTITY wj "⁠"> ]> 5. Including Files This version of the vocabulary does not support an inclusion mechanism on its own -- thus, a document always needs to be self- contained. That being said, some processors do support file inclusion using processing instructions (Section 2.6 of [XML] and Section 4.1.2 of [TCLReadme]). Furthermore, XML itself allows inclusion of external content using the "internal subset" (Section 2.8 of [XML]). Unfortunately, this requires declaring the external data in the DTD upfront. Reschke Expires April 18, 2015 [Page 37] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 For instance: <?xml version="1.0"?> <!DOCTYPE rfc [ <!-- allow later RFC2616 reference using "&rfc2616;" --> <!-- the data will be fetched from xml.resource.org --> <!ENTITY rfc2616 PUBLIC "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2616.xml"> ]> ...declares the entity "rfc2616", which then can be used in the "references" section: <references> &rfc2616; </references> Note that this mechanism only works for well-formed XML fragments; thus any plain text that would need to be escaped in XML can't be included as-is. 6. Internationalization Considerations This format is based on [XML], thus does not have any issues representing arbitrary Unicode [UNICODE] characters in text content. However, the current canonical RFC format is restricted to US-ASCII characters ([USASCII] and Section 3 of [RFC2223]). It is possible that this rule will be relaxed in future revisions of the RFC format (for instance, to allow non-ASCII characters in examples and contact information). In that case, it is expected that the vocabulary will be extended accordingly. 7. Security Considerations The "name" attribute on the <artwork> element (Section 2.5.4) can be used to derive a filename for saving to a local file system. Trusting this kind of information without pre-processing is a known security risk; see Section 4.3 of [RFC6266] for more information. Furthermore, the nature of XML, plus vocabulary features such as typed artwork, make it attractive to extract content from documents for further processing, such for the purpose of checking syntax, or computing/verifying examples. In the latter case, care needs to be taken that only trusted content is processed. Reschke Expires April 18, 2015 [Page 38] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 All security considerations related to XML processing are relevant as well (see Section 7 of [RFC3470]). 8. IANA Considerations 8.1. Internet Media Type Registration IANA maintains the registry of Internet media types [BCP13] at <http://www.iana.org/assignments/media-types>. This document serves as the specification for the Internet media type "application/rfc+xml". The following is to be registered with IANA. Type name: application Subtype name: rfc+xml Required parameters: There are no required parameters. Optional parameters: "charset": This parameter has identical semantics as the charset parameter of the "application/xml" media type specified in Section 9.1 of [RFC7303]. Encoding considerations: Identical to those of "application/xml" as described in Section 9.1 of [RFC7303]. Security considerations: As defined in Section 7. In addition, as this media type uses the "+xml" convention, it inherits the security considerations described in Section 10 of [RFC7303]. Interoperability considerations: N/A Published specification: This specification. Applications that use this media type: Applications that transform xml2rfc to output formats such as plain text or HTML, plus additional analysis tools. Fragment identifier considerations: The "anchor" attribute is used for assigning document-wide unique identifiers that can be used as shorthand pointers, as described in Section 2.8 of [XPOINTER]. Additional information: Deprecated alias names for this type: None. Reschke Expires April 18, 2015 [Page 39] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 Magic number(s): As specified for "application/xml" in Section 9.1 of [RFC7303]. File extension(s): .xml or .rfcxml when disambiguation from other XML files is needed Macintosh file type code(s): TEXT Person & email address to contact for further information: See Authors Section. Intended usage: COMMON Restrictions on usage: N/A Author: See Authors Section. Change controller: RFC Series Editor (rse@rfc-editor.org) 9. Acknowledgments Thanks to everybody who reviewed this document and provided feedback and/or specification text, in particular Brian Carpenter, Elwyn Davies, Tony Hansen, Paul Hoffman, Henrik Levkowetz, Alice Russo, Tom Taylor, Jim Schaad, and Nico Williams. We also thank Marshall T. Rose for both the original design and the reference implementation of the "xml2rfc" formatter. 10. References 10.1. Normative References [XML] Maler, E., Yergeau, F., Paoli, J., Sperberg-McQueen, M., and T. Bray, "Extensible Markup Language (XML) 1.0 (Fifth Edition)", W3C Recommendation REC-xml-20081126, November 2008, <http://www.w3.org/TR/2008/REC-xml-20081126/>. Latest version available at <http://www.w3.org/TR/xml>. 10.2. Informative References [BCP13] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, January 2013. [IDGUIDE] Housley, R., "Guidelines to Authors of Internet-Drafts", Reschke Expires April 18, 2015 [Page 40] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 December 2010, <http://www.ietf.org/id-info/guidelines.html>. [JING] Thai Open Source Software Center Ltd, "Jing - A RELAX NG validator in Java", 2008, <http://www.thaiopensource.com/relaxng/jing.html>. Downloads: <https://code.google.com/p/jing-trang/downloads/list>. [RFC2026] Bradner, S., "The Internet Standards Process -- Revision 3", BCP 9, RFC 2026, October 1996. [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, November 1996. [RFC2223] Postel, J. and J. Reynolds, "Instructions to RFC Authors", RFC 2223, October 1997. [RFC2397] Masinter, L., "The "data" URL scheme", RFC 2397, August 1998. [RFC2629] Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629, June 1999. [RFC3470] Hollenbeck, S., Rose, M., and L. Masinter, "Guidelines for the Use of Extensible Markup Language (XML) within IETF Protocols", BCP 70, RFC 3470, January 2003. [RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966, December 2004. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC5598] Crocker, D., "Internet Mail Architecture", RFC 5598, July 2009. PDF version: <http://www.rfc-editor.org/rfc/rfc5598.pdf> [RFC5741] Daigle, L. and O. Kolkman, "RFC Streams, Headers, and Boilerplates", RFC 5741, December 2009. [RFC6068] Duerst, M., Masinter, L., and J. Zawinski, "The 'mailto' URI Scheme", RFC 6068, October 2010. Reschke Expires April 18, 2015 [Page 41] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 [RFC6266] Reschke, J., "Use of the Content-Disposition Header Field in the Hypertext Transfer Protocol (HTTP)", RFC 6266, June 2011. [RFC7303] Thompson, H. and C. Lilley, "XML Media Types", RFC 7303, July 2014. [RFC7322] Heather, H. and S. Ginoza, "RFC Style Guide", RFC 7322, September 2014. [RFCPOLICY] RFC Editor, "RFC Editorial Guidelines and Procedures", February 2012, <http://www.rfc-editor.org/policy.html>. [RNC] Clark, J., "RELAX NG Compact Syntax", OASIS , November 2002, <http://www.oasis-open.org/committees/ relax-ng/compact-20021121.html>. [TCLReadme] Rose, M., Fenner, B., and C. Levert, "xml2rfc v1.35pre1", October 2009, <http://svn.tools.ietf.org/ svn/tools/xml2rfc/archive/README.html>. [TLP2.0] IETF Trust, "Legal Provisions Relating to IETF Documents", February 2009, <http://trustee.ietf.org/license-info/IETF-TLP-2.htm>. [TLP3.0] IETF Trust, "Legal Provisions Relating to IETF Documents", September 2009, <http://trustee.ietf.org/license-info/IETF-TLP-3.htm>. [TLP4.0] IETF Trust, "Legal Provisions Relating to IETF Documents", December 2009, <http://trustee.ietf.org/license-info/IETF-TLP-4.htm>. [UNICODE] The Unicode Consortium, "The Unicode Standard, Version 6.3.0", September 2013, <http://www.unicode.org/versions/Unicode6.3.0/>. [USASCII] American National Standards Institute, "Coded Character Set -- 7-bit American Standard Code for Information Interchange", ANSI X3.4, 1986. [V1rev] Rose, M., "Writing I-Ds and RFCs using XML (revised)", February 2008, <http://svn.tools.ietf.org/svn/tools/ xml2rfc/archive/draft-mrose-writing-rfcs.html>. [XPOINTER] Grosso, P., Maler, E., Marsh, J., and N. Walsh, "XPointer Framework", W3C Recommendation REC-xptr- framework-20030325, March 2003, Reschke Expires April 18, 2015 [Page 42] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 <http://www.w3.org/TR/2003/ REC-xptr-framework-20030325/>. Latest version available at <http://www.w3.org/TR/xptr-framework/>. Appendix A. Front Page Generation A.1. The /rfc/@category Attribute For RFCs, the "category" determines the "maturity level" (see Section 4 of [RFC2026]). The allowed values are "std" for "Standards Track", "bcp" for "BCP", "info" for "Informational", "exp" for "Experimental", and "historic" for "Historic". For Internet-Drafts, the category attribute is not needed, but will appear on the front page as "Intended Status". Supplying this information can be useful to reviewers. A.2. The /rfc/@ipr Attribute This attribute value can take a long list of values, each of which describes an IPR policy for the document. This attribute's values are not the result of a grand plan, but remain simply for historic reasons. Of these values, only a few are currently in use; all others are supported by the various tools for backwards compatibility with old source files. Note: some variations of the boilerplate are selected based on the document's date; therefore it is important to specify the "year", "month" and "day" attributes of the "<date>" element when archiving the XML source of an Internet-Draft on the day of submission. _Disclaimer: THIS ONLY PROVIDES IMPLEMENTATION INFORMATION. IF YOU NEED LEGAL ADVICE, PLEASE CONTACT A LAWYER._ For further information, refer to <http://trustee.ietf.org/docs/IETF-Copyright-FAQ.pdf>. For the current "Status Of This Memo" text, the "submissionType" attribute determines whether a statement about "Code Components" is inserted (which is the case for the value "IETF", which is the default). Other values, such as "independent", suppress this part of the text. A.2.1. Current Values: '*trust200902' The name for these values refers to the "IETF TRUST Legal Provisions Relating to IETF Documents", sometimes simply called the "TLP, that Reschke Expires April 18, 2015 [Page 43] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 went into effect on February 15, 2009 ([TLP2.0]). Updates to this document were published on September 12, 2009 ([TLP3.0]) and on December 28, 2009 ([TLP4.0]), modifying the license for code components (see <http://trustee.ietf.org/license-info/> for further information). The actual text is located in Section 6 ("Text To Be Included in IETF Documents") of these documents. The tools will automatically produce the "correct" text depending on the document's date information (see above): +----------+--------------------------------+ | TLP | starting with publication date | +----------+--------------------------------+ | [TLP3.0] | 2009-11-01 | | [TLP4.0] | 2010-04-01 | +----------+--------------------------------+ A.2.1.1. trust200902 This should be the default, unless one of the more specific '*trust200902' values is a better fit. It produces the text in Sections 6.a and 6.b of the TLP. A.2.1.2. noModificationTrust200902 This produces additional text from Section 6.c.i of the TLP: This document may not be modified, and derivative works of it may not be created, except to format it for publication as an RFC or to translate it into languages other than English. Note: this clause is incompatible with RFCs that are published on the Standards Track. A.2.1.3. noDerivativesTrust200902 This produces the additional text from Section 6.c.ii of the TLP: This document may not be modified, and derivative works of it may not be created, and it may not be published except as an Internet- Draft. Note: this clause is incompatible with RFCs. Reschke Expires April 18, 2015 [Page 44] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 A.2.1.4. pre5378Trust200902 This produces the additional text from Section 6.c.iii of the TLP, frequently called the "pre-5378 escape clause": This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. See Section 4 of <http://trustee.ietf.org/docs/IETF-Copyright-FAQ.pdf> for further information about when to use this value. Note: this text appears under "Copyright Notice", unless the document was published before November 2009, in which case it appears under "Status Of This Memo". A.2.2. Historic Values A.2.2.1. Historic Values: '*trust200811' The attribute values "trust200811", "noModificationTrust200811" and "noDerivativesTrust200811" are similar to their "trust200902" counterparts, except that they use text specified in <http:// trustee.ietf.org/license-info/archive/ IETF-Trust-License-Policy_11-10-08.pdf>. A.2.2.2. Historic Values: '*3978' The attribute values "full3978", "noModification3978" and "noDerivatives3978" are similar to their counterparts above, except that they use text specified in RFC 3978 (March 2005). A.2.2.3. Historic Values: '*3667' The attribute values "full3667", "noModification3667" and "noDerivatives3667" are similar to their counterparts above, except that they use text specified in RFC 3667 (February 2004). Reschke Expires April 18, 2015 [Page 45] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 A.2.2.4. Historic Values: '*2026' The attribute values "full2026" and "noDerivativeWorks2026" are similar to their counterparts above, except that they use text specified in RFC 2026 (October 1996). The special value "none" was also used back then, and denied the IETF any rights beyond publication as Internet-Draft. Appendix B. Changes from RFC 2629 ('v1') [[v1diff: See <http://greenbytes.de/tech/webdav/ draft-reschke-xml2rfc-02.html#rfc.section.E> for a comparison of the schemata.]] B.1. Removed Elements The <appendix> element has been removed; to generate an appendix, place a <section> inside <back>. B.2. Changed Defaults Many attributes have lost their "default" value; this is to avoid having document semantics differ based on whether a DTD was specified and evaluated. Processors will handle absent values the way the default value was specified before. B.3. Changed Elements <artwork>: Has a set of new attributes: "name", "type", "src", "align", "alt", "width", and "height". (Section 2.5) <author>: The <organization> element is now optional. The "role" attribute was added. (Section 2.6) <country>: The requirement to use ISO 3166 codes was removed. (Section 2.11) <date>: All attributes are now optional. (Section 2.13) <figure>: Has a set of new attributes: "suppress-title", "src", "align", "alt", "width", and "height". (Section 2.17) <iref>: Has a new "primary" attribute. (Section 2.20) <list>: The "style" attribute isn't restricted to a set of enumerated values anymore. The "hangIndent" and "counter" attributes have been added. (Section 2.22) Reschke Expires April 18, 2015 [Page 46] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 <rfc>: The "ipr" attribute has gained additional values. The attributes "consensus", "iprExtract", "submissionType", and "xml: lang" have been added. (Section 2.33) <reference>: <annotation> allows adding prose to a reference. The "anchor" attribute has been made mandatory. (Section 2.30) <references>: Can now appear multiple times, and carry a "title" attribute (so that normative and informative references can be split). (Section 2.31) <section>: The new "toc" attribute controls whether it will appear in the Table Of Contents. <iref> can now appear as direct child element. (Section 2.34) <t>: The "anchor" attribute can now be used as well, however there are restrictions on how they can be referred to. (Section 2.38) B.4. New Elements The following elements have been added: <annotation> (Section 2.3), <c> (Section 2.8), <cref> (Section 2.12), <format> (Section 2.18), <spanx> (Section 2.36), <texttable> (Section 2.39), <ttcol> (Section 2.41). Appendix C. Relax NG Schema namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0" rfc = element rfc { attribute number { text }?, [ a:defaultValue = "" ] attribute obsoletes { text }?, [ a:defaultValue = "" ] attribute updates { text }?, attribute category { "std" | "bcp" | "info" | "exp" | "historic" }?, attribute consensus { "no" | "yes" }?, attribute seriesNo { text }?, attribute ipr { "full2026" | "noDerivativeWorks2026" | "none" | "full3667" | "noModification3667" | "noDerivatives3667" | "full3978" | "noModification3978" | "noDerivatives3978" Reschke Expires April 18, 2015 [Page 47] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 | "trust200811" | "noModificationTrust200811" | "noDerivativesTrust200811" | "trust200902" | "noModificationTrust200902" | "noDerivativesTrust200902" | "pre5378Trust200902" }?, attribute iprExtract { xsd:IDREF }?, [ a:defaultValue = "IETF" ] attribute submissionType { "IETF" | "IAB" | "IRTF" | "independent" }?, attribute docName { text }?, [ a:defaultValue = "en" ] attribute xml:lang { text }?, front, middle, back? } front = element front { title, author+, date, area*, workgroup*, keyword*, abstract?, note* } title = element title { attribute abbrev { text }?, text } author = element author { attribute initials { text }?, attribute surname { text }?, attribute fullname { text }?, attribute role { "editor" }?, organization?, address? } organization = element organization { attribute abbrev { text }?, text } address = element address { postal?, phone?, facsimile?, email?, uri? } postal = element postal { street+, (city | region | code | country)* } street = element street { text } Reschke Expires April 18, 2015 [Page 48] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 city = element city { text } region = element region { text } code = element code { text } country = element country { text } phone = element phone { text } facsimile = element facsimile { text } email = element email { text } uri = element uri { text } date = element date { attribute day { text }?, attribute month { text }?, attribute year { text }?, empty } area = element area { text } workgroup = element workgroup { text } keyword = element keyword { text } abstract = element abstract { t+ } note = element note { attribute title { text }, t+ } middle = element middle { section+ } section = element section { attribute anchor { xsd:ID }?, attribute title { text }, [ a:defaultValue = "default" ] attribute toc { "include" | "exclude" | "default" }?, (t | figure | texttable | iref)*, section* } t = element t { attribute anchor { xsd:ID }?, attribute hangText { text }?, (text | \list | figure | xref | eref | iref | cref | spanx | vspace)* } Reschke Expires April 18, 2015 [Page 49] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 \list = element list { attribute style { text }?, attribute hangIndent { text }?, attribute counter { text }?, t+ } xref = element xref { attribute target { xsd:IDREF }, [ a:defaultValue = "false" ] attribute pageno { "true" | "false" }?, [ a:defaultValue = "default" ] attribute format { "counter" | "title" | "none" | "default" }?, text } eref = element eref { attribute target { text }, text } iref = element iref { attribute item { text }, [ a:defaultValue = "" ] attribute subitem { text }?, [ a:defaultValue = "false" ] attribute primary { "true" | "false" }?, empty } cref = element cref { attribute anchor { xsd:ID }?, attribute source { text }?, text } spanx = element spanx { [ a:defaultValue = "preserve" ] attribute xml:space { "default" | "preserve" }?, [ a:defaultValue = "emph" ] attribute style { text }?, text } vspace = element vspace { [ a:defaultValue = "0" ] attribute blankLines { text }?, empty } figure = Reschke Expires April 18, 2015 [Page 50] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 element figure { attribute anchor { xsd:ID }?, [ a:defaultValue = "" ] attribute title { text }?, [ a:defaultValue = "false" ] attribute suppress-title { "true" | "false" }?, attribute src { text }?, [ a:defaultValue = "left" ] attribute align { "left" | "center" | "right" }?, [ a:defaultValue = "" ] attribute alt { text }?, [ a:defaultValue = "" ] attribute width { text }?, [ a:defaultValue = "" ] attribute height { text }?, iref*, preamble?, artwork, postamble? } preamble = element preamble { (text | xref | eref | iref | cref | spanx)* } artwork = element artwork { [ a:defaultValue = "preserve" ] attribute xml:space { "default" | "preserve" }?, [ a:defaultValue = "" ] attribute name { text }?, [ a:defaultValue = "" ] attribute type { text }?, attribute src { text }?, [ a:defaultValue = "left" ] attribute align { "left" | "center" | "right" }?, [ a:defaultValue = "" ] attribute alt { text }?, [ a:defaultValue = "" ] attribute width { text }?, [ a:defaultValue = "" ] attribute height { text }?, text* } postamble = element postamble { (text | xref | eref | iref | cref | spanx)* } texttable = element texttable { attribute anchor { xsd:ID }?, [ a:defaultValue = "" ] attribute title { text }?, [ a:defaultValue = "false" ] attribute suppress-title { "true" | "false" }?, [ a:defaultValue = "center" ] attribute align { "left" | "center" | "right" }?, [ a:defaultValue = "full" ] attribute style { "all" | "none" | "headers" | "full" }?, preamble?, ttcol+, c*, postamble? Reschke Expires April 18, 2015 [Page 51] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 } ttcol = element ttcol { attribute width { text }?, [ a:defaultValue = "left" ] attribute align { "left" | "center" | "right" }?, text } c = element c { (text | xref | eref | iref | cref | spanx)* } back = element back { references*, section* } references = element references { [ a:defaultValue = "References" ] attribute title { text }?, reference+ } reference = element reference { attribute anchor { xsd:ID }?, attribute target { text }?, front, seriesInfo*, format*, annotation* } seriesInfo = element seriesInfo { attribute name { text }, attribute value { text }, empty } format = element format { attribute target { text }?, attribute type { text }, attribute octets { text }?, empty } annotation = element annotation { (text | xref | eref | iref | cref | spanx)* } start = rfc (This schema was derived from version 1.3.6 of the xml2rfc DTD ('Document Type Definition', [XML], Section 2.8), available from <htt p://svn.tools.ietf.org/svn/tools/xml2rfc/vocabulary/v2/03/ xml2rfcv2.dtd>). Reschke Expires April 18, 2015 [Page 52] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 C.1. Checking Validity The validity of XML files can be checked with any tool that supports Relax NG ([RNC]). The reference implementation is the Java-based, open sourced "JING" ([JING]). To use JING, download the latest ZIP file from the "downloads" page (currently <https://code.google.com/p/jing-trang/downloads/ detail?name=jing-20091111.zip>), extract the archive, copy "jing.jar" from the "bin" folder, and make sure Java is installed). To check a file "test.xml" using the RNC file "schema.rnc", run (from a command line prompt): java -jar jing.jar -c schema.rnc test.xml In good Unix tradition, no output means the file is valid. Index A abbrev attribute in organization element 20 in title element 33 abstract element 5 inside front 16 address element 5 inside author 9 align attribute in artwork element 7 in figure element 14 in texttable element 31 in ttcol element 33 alt attribute in artwork element 7 in figure element 14 anchor attribute in cref element 11 in figure element 14 in reference element 22 in section element 28 in t element 30 in texttable element 31 annotation element 5 inside reference 22 application/rfc+xml Media Type 39 area element 6 inside front 16 Reschke Expires April 18, 2015 [Page 53] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 artwork element 6 align attribute 7 alt attribute 7 height attribute 7 inside figure 14 name attribute 7 src attribute 8 type attribute 8 width attribute 8 xml:space attribute 8 Attributes abbrev 20, 33 align 7, 14, 31, 33 alt 7, 14 anchor 11, 14, 22, 28, 30-31 blankLines 34 category 24 consensus 24 counter 18 day 12 docName 25 format 35 fullname 9 hangIndent 18 hangText 31 height 7, 14 initials 9 ipr 25 iprExtract 26 item 17 month 12 name 7, 28 number 26 obsoletes 26 octets 15 pageno 36 primary 17 role 9 seriesNo 26 source 12 src 8, 15 style 18, 29, 32 subitem 17 submissionType 26 suppress-title 15, 32 surname 10 target 13, 15, 23, 36 title 15, 20, 23, 28, 32 Reschke Expires April 18, 2015 [Page 54] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 toc 28 type 8, 16 updates 27 value 29 width 8, 15, 33 xml:lang 27 xml:space 8, 29 year 12 author element 9 fullname attribute 9 initials attribute 9 inside front 16 role attribute 9 surname attribute 10 B back element 10 inside rfc 24 blankLines attribute in vspace element 34 C c element 10 inside texttable 31 category attribute in rfc element 24 city element 11 inside postal 21 code element 11 inside postal 21 consensus attribute in rfc element 24 counter attribute in list element 18 country element 11 inside postal 21 cref element 11 anchor attribute 11 inside annotation 6 inside c 10 inside postamble 21 inside preamble 22 inside t 30 source attribute 12 D date element 12 day attribute 12 Reschke Expires April 18, 2015 [Page 55] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 inside front 16 month attribute 12 year attribute 12 day attribute in date element 12 docName attribute in rfc element 25 E Elements abstract 5, 16 address 5, 9 annotation 5, 22 area 6, 16 artwork 6, 14 author 9, 16 back 10, 24 c 10, 31 city 11, 21 code 11, 21 country 11, 21 cref 6, 10-11, 21-22, 30 date 12, 16 email 5, 13 eref 6, 10, 13, 21-22, 30 facsimile 5, 13 figure 13, 27, 30 format 15, 22 front 16, 22, 24 iref 6, 10, 14, 16, 21-22, 27, 30 keyword 16-17 list 17, 30 middle 19, 24 note 16, 20 organization 9, 20 phone 5, 20 postal 5, 21 postamble 14, 21, 31 preamble 14, 22, 31 reference 22-23 references 10, 23 region 21, 23 rfc 24 section 10, 20, 27 seriesInfo 22, 28 spanx 6, 10, 21-22, 29-30 street 21, 30 t 5, 17, 20, 27, 30 Reschke Expires April 18, 2015 [Page 56] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 texttable 27, 31 title 16, 32 ttcol 31, 33 uri 5, 33 vspace 30, 34 workgroup 16, 34 xref 5, 10, 21-22, 30, 34 email element 13 inside address 5 eref element 13 inside annotation 6 inside c 10 inside postamble 21 inside preamble 22 inside t 30 target attribute 13 F facsimile element 13 inside address 5 figure element 13 align attribute 14 alt attribute 14 anchor attribute 14 height attribute 14 inside section 27 inside t 30 src attribute 15 suppress-title attribute 15 title attribute 15 width attribute 15 format attribute in xref element 35 format element 15 inside reference 22 octets attribute 15 target attribute 15 type attribute 16 front element 16 inside reference 22 inside rfc 24 fullname attribute in author element 9 H hangIndent attribute in list element 18 hangText attribute Reschke Expires April 18, 2015 [Page 57] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 in t element 31 height attribute in artwork element 7 in figure element 14 I initials attribute in author element 9 ipr attribute '*2026' 46 '*3667' 45 '*3978' 45 '*trust200811' 45 '*trust200902' 43 'noDerivativesTrust200902' 44 'noModificationTrust200902' 44 'pre5378Trust200902' 45 'trust200902' 44 in rfc element 25 iprExtract attribute in rfc element 26 iref element 16 inside annotation 6 inside c 10 inside figure 14 inside postamble 21 inside preamble 22 inside section 27 inside t 30 item attribute 17 primary attribute 17 subitem attribute 17 item attribute in iref element 17 K keyword element 17 inside front 16 L list element 17 counter attribute 18 hangIndent attribute 18 inside t 30 style attribute 18 list styles empty 18 format ... 19 Reschke Expires April 18, 2015 [Page 58] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 hanging 18 letters 18 numbers 19 symbols 19 M Media Type application/rfc+xml 39 middle element 19 inside rfc 24 month attribute in date element 12 N name attribute in artwork element 7 in seriesInfo element 28 note element 20 inside front 16 title attribute 20 number attribute in rfc element 26 O obsoletes attribute in rfc element 26 octets attribute in format element 15 organization element 20 abbrev attribute 20 inside author 9 P pageno attribute in xref element 36 phone element 20 inside address 5 postal element 21 inside address 5 postamble element 21 inside figure 14 inside texttable 31 preamble element 22 inside figure 14 inside texttable 31 primary attribute in iref element 17 Reschke Expires April 18, 2015 [Page 59] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 R reference element 22 anchor attribute 22 inside references 23 target attribute 23 references element 23 inside back 10 title attribute 23 region element 23 inside postal 21 rfc element 24 category attribute 24 consensus attribute 24 docName attribute 25 ipr attribute 25 iprExtract attribute 26 number attribute 26 obsoletes attribute 26 seriesNo attribute 26 submissionType attribute 26 updates attribute 27 xml:lang attribute 27 role attribute in author element 9 S section element 27 anchor attribute 28 inside back 10 inside middle 20 inside section 27 title attribute 28 toc attribute 28 seriesInfo element 28 inside reference 22 name attribute 28 value attribute 29 seriesNo attribute in rfc element 26 source attribute in cref element 12 spanx element 29 inside annotation 6 inside c 10 inside postamble 21 inside preamble 22 inside t 30 style attribute 29 Reschke Expires April 18, 2015 [Page 60] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 xml:space attribute 29 src attribute in artwork element 8 in figure element 15 street element 30 inside postal 21 style attribute in list element 18 in spanx element 29 in texttable element 32 subitem attribute in iref element 17 submissionType attribute in rfc element 26 suppress-title attribute in figure element 15 in texttable element 32 surname attribute in author element 10 T t element 30 anchor attribute 30 hangText attribute 31 inside abstract 5 inside list 17 inside note 20 inside section 27 target attribute in eref element 13 in format element 15 in reference element 23 in xref element 36 texttable element 31 align attribute 31 anchor attribute 31 inside section 27 style attribute 32 suppress-title attribute 32 title attribute 32 title attribute in figure element 15 in note element 20 in references element 23 in section element 28 in texttable element 32 title element 32 abbrev attribute 33 Reschke Expires April 18, 2015 [Page 61] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 inside front 16 toc attribute in section element 28 ttcol element 33 align attribute 33 inside texttable 31 width attribute 33 type attribute in artwork element 8 in format element 16 U updates attribute in rfc element 27 uri element 33 inside address 5 V value attribute in seriesInfo element 29 vspace element 34 blankLines attribute 34 inside t 30 W width attribute in artwork element 8 in figure element 15 in ttcol element 33 workgroup element 34 inside front 16 X xml:lang attribute in rfc element 27 xml:space attribute in artwork element 8 in spanx element 29 xref element 34 format attribute 35 inside annotation 5 inside c 10 inside postamble 21 inside preamble 22 inside t 30 pageno attribute 36 target attribute 36 xref formats Reschke Expires April 18, 2015 [Page 62] Internet-Draft The 'XML2RFC' version 2 Vocabulary October 2014 counter 35 default 35 none 35 title 35 Y year attribute in date element 12 Author's Address Julian F. Reschke greenbytes GmbH Hafenweg 16 Muenster, NW 48155 Germany EMail: julian.reschke@greenbytes.de URI: http://greenbytes.de/tech/webdav/ Reschke Expires April 18, 2015 [Page 63]