Network Working Group A. Melnikov, Ed. Internet-Draft Isode Ltd Obsoletes: 3501 (if approved) April 26, 2015 Intended status: Standards Track Expires: October 28, 2015 INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev2 draft-melnikov-imap4rev2-00.txt Abstract The Internet Message Access Protocol, Version 4rev2 (IMAP4rev2) allows a client to access and manipulate electronic mail messages on a server. IMAP4rev2 permits manipulation of mailboxes (remote message folders) in a way that is functionally equivalent to local folders. IMAP4rev2 also provides the capability for an offline client to resynchronize with the server. IMAP4rev2 includes operations for creating, deleting, and renaming mailboxes, checking for new messages, permanently removing messages, setting and clearing flags, RFC 5322 and RFC 2045 parsing, searching, and selective fetching of message attributes, texts, and portions thereof. Messages in IMAP4rev2 are accessed by the use of numbers. These numbers are either message sequence numbers or unique identifiers. IMAP4rev2 supports a single server. A mechanism for accessing configuration information to support multiple IMAP4rev2 servers is discussed in RFC 2244. IMAP4rev2 does not specify a means of posting mail; this function is handled by a mail transfer protocol such as RFC 5321. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." Melnikov Expires October 28, 2015 [Page 1] Internet-Draft IMAP4rev2 April 2015 This Internet-Draft will expire on October 28, 2015. Copyright Notice Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. How to Read This Document . . . . . . . . . . . . . . . . . . 5 1.1. Organization of This Document . . . . . . . . . . . . . . 5 1.2. Conventions Used in This Document . . . . . . . . . . . . 5 1.3. Special Notes to Implementors . . . . . . . . . . . . . . 6 2. Protocol Overview . . . . . . . . . . . . . . . . . . . . . . 6 2.1. Link Level . . . . . . . . . . . . . . . . . . . . . . . 7 2.2. Commands and Responses . . . . . . . . . . . . . . . . . 7 2.2.1. Client Protocol Sender and Server Protocol Receiver . 7 2.2.2. Server Protocol Sender and Client Protocol Receiver . 8 2.3. Message Attributes . . . . . . . . . . . . . . . . . . . 9 2.3.1. Message Numbers . . . . . . . . . . . . . . . . . . . 9 2.3.2. Flags Message Attribute . . . . . . . . . . . . . . . 11 2.3.3. Internal Date Message Attribute . . . . . . . . . . . 12 2.3.4. [RFC-5322] Size Message Attribute . . . . . . . . . . 12 2.3.5. Envelope Structure Message Attribute . . . . . . . . 13 2.3.6. Body Structure Message Attribute . . . . . . . . . . 13 2.4. Message Texts . . . . . . . . . . . . . . . . . . . . . . 13 Melnikov Expires October 28, 2015 [Page 2] Internet-Draft IMAP4rev2 April 2015 3. State and Flow Diagram . . . . . . . . . . . . . . . . . . . 13 3.1. Not Authenticated State . . . . . . . . . . . . . . . . . 13 3.2. Authenticated State . . . . . . . . . . . . . . . . . . . 13 3.3. Selected State . . . . . . . . . . . . . . . . . . . . . 14 3.4. Logout State . . . . . . . . . . . . . . . . . . . . . . 14 4. Data Formats . . . . . . . . . . . . . . . . . . . . . . . . 15 4.1. Atom . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.1.1. Sequence set and UID set . . . . . . . . . . . . . . 16 4.2. Number . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.3. String . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.3.1. 8-bit and Binary Strings . . . . . . . . . . . . . . 17 4.4. Parenthesized List . . . . . . . . . . . . . . . . . . . 17 4.5. NIL . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5. Operational Considerations . . . . . . . . . . . . . . . . . 17 5.1. Mailbox Naming . . . . . . . . . . . . . . . . . . . . . 17 5.1.1. Mailbox Hierarchy Naming . . . . . . . . . . . . . . 19 5.1.2. Mailbox Namespace Naming Convention . . . . . . . . . 19 5.1.3. Mailbox International Naming Convention . . . . . . . 19 5.2. Mailbox Size and Message Status Updates . . . . . . . . . 21 5.3. Response when no Command in Progress . . . . . . . . . . 21 5.4. Autologout Timer . . . . . . . . . . . . . . . . . . . . 21 5.5. Multiple Commands in Progress . . . . . . . . . . . . . . 22 6. Client Commands . . . . . . . . . . . . . . . . . . . . . . . 23 6.1. Client Commands - Any State . . . . . . . . . . . . . . . 23 6.1.1. CAPABILITY Command . . . . . . . . . . . . . . . . . 24 6.1.2. NOOP Command . . . . . . . . . . . . . . . . . . . . 25 6.1.3. LOGOUT Command . . . . . . . . . . . . . . . . . . . 25 6.2. Client Commands - Not Authenticated State . . . . . . . . 26 6.2.1. STARTTLS Command . . . . . . . . . . . . . . . . . . 26 6.2.2. AUTHENTICATE Command . . . . . . . . . . . . . . . . 27 6.2.3. LOGIN Command . . . . . . . . . . . . . . . . . . . . 30 6.3. Client Commands - Authenticated State . . . . . . . . . . 30 6.3.1. ENABLE Command . . . . . . . . . . . . . . . . . . . 31 6.3.2. SELECT Command . . . . . . . . . . . . . . . . . . . 33 6.3.3. EXAMINE Command . . . . . . . . . . . . . . . . . . . 34 6.3.4. CREATE Command . . . . . . . . . . . . . . . . . . . 35 6.3.5. DELETE Command . . . . . . . . . . . . . . . . . . . 36 6.3.6. RENAME Command . . . . . . . . . . . . . . . . . . . 37 6.3.7. SUBSCRIBE Command . . . . . . . . . . . . . . . . . . 39 6.3.8. UNSUBSCRIBE Command . . . . . . . . . . . . . . . . . 40 6.3.9. LIST Command . . . . . . . . . . . . . . . . . . . . 40 6.3.10. LSUB Command . . . . . . . . . . . . . . . . . . . . 43 6.3.11. STATUS Command . . . . . . . . . . . . . . . . . . . 44 6.3.12. APPEND Command . . . . . . . . . . . . . . . . . . . 45 6.4. Client Commands - Selected State . . . . . . . . . . . . 48 6.4.1. CHECK Command . . . . . . . . . . . . . . . . . . . . 48 6.4.2. CLOSE Command . . . . . . . . . . . . . . . . . . . . 49 6.4.3. UNSELECT Command . . . . . . . . . . . . . . . . . . 49 Melnikov Expires October 28, 2015 [Page 3] Internet-Draft IMAP4rev2 April 2015 6.4.4. EXPUNGE Command . . . . . . . . . . . . . . . . . . . 50 6.4.5. SEARCH Command . . . . . . . . . . . . . . . . . . . 50 6.4.6. FETCH Command . . . . . . . . . . . . . . . . . . . . 56 6.4.7. STORE Command . . . . . . . . . . . . . . . . . . . . 59 6.4.8. COPY Command . . . . . . . . . . . . . . . . . . . . 60 6.4.9. UID Command . . . . . . . . . . . . . . . . . . . . . 61 6.5. Client Commands - Experimental/Expansion . . . . . . . . 63 6.5.1. X Command . . . . . . . . . . . . . . . . . . . 63 7. Server Responses . . . . . . . . . . . . . . . . . . . . . . 64 7.1. Server Responses - Status Responses . . . . . . . . . . . 65 7.1.1. OK Response . . . . . . . . . . . . . . . . . . . . . 72 7.1.2. NO Response . . . . . . . . . . . . . . . . . . . . . 72 7.1.3. BAD Response . . . . . . . . . . . . . . . . . . . . 73 7.1.4. PREAUTH Response . . . . . . . . . . . . . . . . . . 73 7.1.5. BYE Response . . . . . . . . . . . . . . . . . . . . 73 7.2. Server Responses - Server and Mailbox Status . . . . . . 74 7.2.1. The ENABLED Response . . . . . . . . . . . . . . . . 74 7.2.2. CAPABILITY Response . . . . . . . . . . . . . . . . . 74 7.2.3. LIST Response . . . . . . . . . . . . . . . . . . . . 75 7.2.4. LSUB Response . . . . . . . . . . . . . . . . . . . . 76 7.2.5. STATUS Response . . . . . . . . . . . . . . . . . . . 77 7.2.6. ESEARCH Response . . . . . . . . . . . . . . . . . . 77 7.2.7. FLAGS Response . . . . . . . . . . . . . . . . . . . 77 7.3. Server Responses - Mailbox Size . . . . . . . . . . . . . 78 7.3.1. EXISTS Response . . . . . . . . . . . . . . . . . . . 78 7.3.2. RECENT Response . . . . . . . . . . . . . . . . . . . 78 7.4. Server Responses - Message Status . . . . . . . . . . . . 79 7.4.1. EXPUNGE Response . . . . . . . . . . . . . . . . . . 79 7.4.2. FETCH Response . . . . . . . . . . . . . . . . . . . 80 7.5. Server Responses - Command Continuation Request . . . . . 85 8. Sample IMAP4rev2 connection . . . . . . . . . . . . . . . . . 85 9. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 87 10. Author's Note . . . . . . . . . . . . . . . . . . . . . . . . 100 11. Security Considerations . . . . . . . . . . . . . . . . . . . 100 11.1. STARTTLS Security Considerations . . . . . . . . . . . . 100 11.2. COPYUID and APPENDUID response codes . . . . . . . . . . 101 11.3. Other Security Considerations . . . . . . . . . . . . . 101 12. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 102 13. References . . . . . . . . . . . . . . . . . . . . . . . . . 102 13.1. Normative References . . . . . . . . . . . . . . . . . . 102 13.2. Informative References (related protocols) . . . . . . . 104 13.3. Informative References (historical aspects of IMAP and related protocols) . . . . . . . . . . . . . . . . . . . 105 Appendix A. Backward compatibility with IMAP4rev1 . . . . . . . 105 Appendix B. Changes from RFC 3501 / IMAP4rev1 . . . . . . . . . 105 Appendix C. Acknowledgement . . . . . . . . . . . . . . . . . . 106 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 111 Melnikov Expires October 28, 2015 [Page 4] Internet-Draft IMAP4rev2 April 2015 1. How to Read This Document 1.1. Organization of This Document This document is written from the point of view of the implementor of an IMAP4rev2 client or server. Beyond the protocol overview in section 2, it is not optimized for someone trying to understand the operation of the protocol. The material in sections 3 through 5 provides the general context and definitions with which IMAP4rev2 operates. Sections 6, 7, and 9 describe the IMAP commands, responses, and syntax, respectively. The relationships among these are such that it is almost impossible to understand any of them separately. In particular, do not attempt to deduce command syntax from the command section alone; instead refer to the Formal Syntax section. 1.2. Conventions Used in This Document "Conventions" are basic principles or procedures. Document conventions are noted in this section. In examples, "C:" and "S:" indicate lines sent by the client and server respectively. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [KEYWORDS]. The word "can" (not "may") is used to refer to a possible circumstance or situation, as opposed to an optional facility of the protocol. "User" is used to refer to a human user, whereas "client" refers to the software being run by the user. "Connection" refers to the entire sequence of client/server interaction from the initial establishment of the network connection until its termination. "Session" refers to the sequence of client/server interaction from the time that a mailbox is selected (SELECT or EXAMINE command) until the time that selection ends (SELECT or EXAMINE of another mailbox, CLOSE command, or connection termination). Characters are 7-bit US-ASCII unless otherwise specified. Other character sets are indicated using a "CHARSET", as described in [MIME-IMT] and defined in [CHARSET]. CHARSETs have important Melnikov Expires October 28, 2015 [Page 5] Internet-Draft IMAP4rev2 April 2015 additional semantics in addition to defining character set; refer to these documents for more detail. There are several protocol conventions in IMAP. These refer to aspects of the specification which are not strictly part of the IMAP protocol, but reflect generally-accepted practice. Implementations need to be aware of these conventions, and avoid conflicts whether or not they implement the convention. For example, "&" may not be used as a hierarchy delimiter since it conflicts with the Mailbox International Naming Convention, and other uses of "&" in mailbox names are impacted as well. 1.3. Special Notes to Implementors Implementors of the IMAP protocol are strongly encouraged to read the IMAP implementation recommendations document [IMAP-IMPLEMENTATION] in conjunction with this document, to help understand the intricacies of this protocol and how best to build an interoperable product. IMAP4rev2 is designed to be upwards compatible from the [IMAP2] and unpublished IMAP2bis protocols. IMAP4rev2 is largely compatible with the IMAP4rev1 protocol described in RFC 3501 and the IMAP4 protocol described in RFC 1730; the exception being in certain facilities added in RFC 1730 that proved problematic and were subsequently removed. In the course of the evolution of IMAP4rev2, some aspects in the earlier protocols have become obsolete. Obsolete commands, responses, and data formats which an IMAP4rev2 implementation can encounter when used with an earlier implementation are described in [IMAP-OBSOLETE]. Other compatibility issues with IMAP2bis, the most common variant of the earlier protocol, are discussed in [IMAP-COMPAT]. A full discussion of compatibility issues with rare (and presumed extinct) variants of [IMAP2] is in [IMAP-HISTORICAL]; this document is primarily of historical interest. IMAP was originally developed for the older [RFC-822] standard, and as a consequence several fetch items in IMAP incorporate "RFC822" in their name. With the exception of RFC822.SIZE, there are more modern replacements; for example, the modern version of RFC822.HEADER is BODY.PEEK[HEADER]. In all cases, "RFC822" should be interpreted as a reference to the updated [RFC-5322] standard. 2. Protocol Overview Melnikov Expires October 28, 2015 [Page 6] Internet-Draft IMAP4rev2 April 2015 2.1. Link Level The IMAP4rev2 protocol assumes a reliable data stream such as that provided by TCP. When TCP is used, an IMAP4rev2 server listens on port 143. 2.2. Commands and Responses An IMAP4rev2 connection consists of the establishment of a client/ server network connection, an initial greeting from the server, and client/server interactions. These client/server interactions consist of a client command, server data, and a server completion result response. All interactions transmitted by client and server are in the form of lines, that is, strings that end with a CRLF. The protocol receiver of an IMAP4rev2 client or server is either reading a line, or is reading a sequence of octets with a known count followed by a line. 2.2.1. Client Protocol Sender and Server Protocol Receiver The client command begins an operation. Each client command is prefixed with an identifier (typically a short alphanumeric string, e.g., A0001, A0002, etc.) called a "tag". A different tag is generated by the client for each command. Clients MUST follow the syntax outlined in this specification strictly. It is a syntax error to send a command with missing or extraneous spaces or arguments. There are two cases in which a line from the client does not represent a complete command. In one case, a command argument is quoted with an octet count (see the description of literal in String under Data Formats); in the other case, the command arguments require server feedback (see the AUTHENTICATE command). In either case, the server sends a command continuation request response if it is ready for the octets (if appropriate) and the remainder of the command. This response is prefixed with the token "+". Note: If instead, the server detected an error in the command, it sends a BAD completion response with a tag matching the command (as described below) to reject the command and prevent the client from sending any more of the command. It is also possible for the server to send a completion response for some other command (if multiple commands are in progress), or untagged data. In either case, the command continuation request is still pending; the client takes the appropriate action for the Melnikov Expires October 28, 2015 [Page 7] Internet-Draft IMAP4rev2 April 2015 response, and reads another response from the server. In all cases, the client MUST send a complete command (including receiving all command continuation request responses and command continuations for the command) before initiating a new command. The protocol receiver of an IMAP4rev2 server reads a command line from the client, parses the command and its arguments, and transmits server data and a server command completion result response. 2.2.2. Server Protocol Sender and Client Protocol Receiver Data transmitted by the server to the client and status responses that do not indicate command completion are prefixed with the token "*", and are called untagged responses. Server data MAY be sent as a result of a client command, or MAY be sent unilaterally by the server. There is no syntactic difference between server data that resulted from a specific command and server data that were sent unilaterally. The server completion result response indicates the success or failure of the operation. It is tagged with the same tag as the client command which began the operation. Thus, if more than one command is in progress, the tag in a server completion response identifies the command to which the response applies. There are three possible server completion responses: OK (indicating success), NO (indicating failure), or BAD (indicating a protocol error such as unrecognized command or command syntax error). Servers SHOULD enforce the syntax outlined in this specification strictly. Any client command with a protocol syntax error, including (but not limited to) missing or extraneous spaces or arguments, SHOULD be rejected, and the client given a BAD server completion response. The protocol receiver of an IMAP4rev2 client reads a response line from the server. It then takes action on the response based upon the first token of the response, which can be a tag, a "*", or a "+". A client MUST be prepared to accept any server response at all times. This includes server data that was not requested. Server data SHOULD be recorded, so that the client can reference its recorded copy rather than sending a command to the server to request the data. In the case of certain server data, the data MUST be recorded. This topic is discussed in greater detail in the Server Responses section. Melnikov Expires October 28, 2015 [Page 8] Internet-Draft IMAP4rev2 April 2015 2.3. Message Attributes In addition to message text, each message has several attributes associated with it. These attributes can be retrieved individually or in conjunction with other attributes or message texts. 2.3.1. Message Numbers Messages in IMAP4rev2 are accessed by one of two numbers; the unique identifier or the message sequence number. 2.3.1.1. Unique Identifier (UID) Message Attribute An unsigned 32-bit value assigned to each message, which when used with the unique identifier validity value (see below) forms a 64-bit value that MUST NOT refer to any other message in the mailbox or any subsequent mailbox with the same name forever. Unique identifiers are assigned in a strictly ascending fashion in the mailbox; as each message is added to the mailbox it is assigned a higher UID than the message(s) which were added previously. Unlike message sequence numbers, unique identifiers are not necessarily contiguous. The unique identifier of a message MUST NOT change during the session, and SHOULD NOT change between sessions. Any change of unique identifiers between sessions MUST be detectable using the UIDVALIDITY mechanism discussed below. Persistent unique identifiers are required for a client to resynchronize its state from a previous session with the server (e.g., disconnected or offline access clients); this is discussed further in [IMAP-DISC]. Associated with every mailbox are two 32-bit unsigned values which aid in unique identifier handling: the next unique identifier value (UIDNEXT) and the unique identifier validity value (UIDVALIDITY). The next unique identifier value is the predicted value that will be assigned to a new message in the mailbox. Unless the unique identifier validity also changes (see below), the next unique identifier value MUST have the following two characteristics. First, the next unique identifier value MUST NOT change unless new messages are added to the mailbox; and second, the next unique identifier value MUST change whenever new messages are added to the mailbox, even if those new messages are subsequently expunged. Note: The next unique identifier value is intended to provide a means for a client to determine whether any messages have been delivered to the mailbox since the previous time it checked this value. It is not intended to provide any guarantee that any message will have this unique identifier. A client can only Melnikov Expires October 28, 2015 [Page 9] Internet-Draft IMAP4rev2 April 2015 assume, at the time that it obtains the next unique identifier value, that messages arriving after that time will have a UID greater than or equal to that value. The unique identifier validity value is sent in a UIDVALIDITY response code in an OK untagged response at mailbox selection time. If unique identifiers from an earlier session fail to persist in this session, the unique identifier validity value MUST be greater than the one used in the earlier session. Note: Ideally, unique identifiers SHOULD persist at all times. Although this specification recognizes that failure to persist can be unavoidable in certain server environments, it STRONGLY ENCOURAGES message store implementation techniques that avoid this problem. For example: 1. Unique identifiers MUST be strictly ascending in the mailbox at all times. If the physical message store is re-ordered by a non-IMAP agent, this requires that the unique identifiers in the mailbox be regenerated, since the former unique identifiers are no longer strictly ascending as a result of the re-ordering. 2. If the message store has no mechanism to store unique identifiers, it must regenerate unique identifiers at each session, and each session must have a unique UIDVALIDITY value. 3. If the mailbox is deleted and a new mailbox with the same name is created at a later date, the server must either keep track of unique identifiers from the previous instance of the mailbox, or it must assign a new UIDVALIDITY value to the new instance of the mailbox. A good UIDVALIDITY value to use in this case is a 32-bit representation of the creation date/time of the mailbox. It is alright to use a constant such as 1, but only if it guaranteed that unique identifiers will never be reused, even in the case of a mailbox being deleted (or renamed) and a new mailbox by the same name created at some future time. 4. The combination of mailbox name, UIDVALIDITY, and UID must refer to a single immutable message on that server forever. In particular, the internal date, [RFC-5322] size, envelope, body structure, and message texts (RFC822, RFC822.HEADER, RFC822.TEXT, and all BODY[...] fetch data items) must never change. This does not include message numbers, nor does it include attributes that can be set by a STORE command (e.g., FLAGS). Melnikov Expires October 28, 2015 [Page 10] Internet-Draft IMAP4rev2 April 2015 2.3.1.2. Message Sequence Number Message Attribute A relative position from 1 to the number of messages in the mailbox. This position MUST be ordered by ascending unique identifier. As each new message is added, it is assigned a message sequence number that is 1 higher than the number of messages in the mailbox before that new message was added. Message sequence numbers can be reassigned during the session. For example, when a message is permanently removed (expunged) from the mailbox, the message sequence number for all subsequent messages is decremented. The number of messages in the mailbox is also decremented. Similarly, a new message can be assigned a message sequence number that was once held by some other message prior to an expunge. In addition to accessing messages by relative position in the mailbox, message sequence numbers can be used in mathematical calculations. For example, if an untagged "11 EXISTS" is received, and previously an untagged "8 EXISTS" was received, three new messages have arrived with message sequence numbers of 9, 10, and 11. Another example, if message 287 in a 523 message mailbox has UID 12345, there are exactly 286 messages which have lesser UIDs and 236 messages which have greater UIDs. 2.3.2. Flags Message Attribute A list of zero or more named tokens associated with the message. A flag is set by its addition to this list, and is cleared by its removal. There are two types of flags in IMAP4rev2. A flag of either type can be permanent or session-only. A system flag is a flag name that is pre-defined in this specification. All system flags begin with "\". Certain system flags (\Deleted and \Seen) have special semantics described elsewhere. The currently-defined system flags are: \Seen Message has been read \Answered Message has been answered \Flagged Message is "flagged" for urgent/special attention \Deleted Message is "deleted" for removal by later EXPUNGE \Draft Message has not completed composition (marked as a draft). Melnikov Expires October 28, 2015 [Page 11] Internet-Draft IMAP4rev2 April 2015 \Recent Message is "recently" arrived in this mailbox. This session is the first session to have been notified about this message; if the session is read-write, subsequent sessions will not see \Recent set for this message. This flag can not be altered by the client. If it is not possible to determine whether or not this session is the first session to be notified about a message, then that message SHOULD be considered recent. If multiple connections have the same mailbox selected simultaneously, it is undefined which of these connections will see newly-arrived messages with \Recent set and which will see it without \Recent set. A keyword is defined by the server implementation. Keywords do not begin with "\". Servers MAY permit the client to define new keywords in the mailbox (see the description of the PERMANENTFLAGS response code for more information). A flag can be permanent or session-only on a per-flag basis. Permanent flags are those which the client can add or remove from the message flags permanently; that is, concurrent and subsequent sessions will see any change in permanent flags. Changes to session flags are valid only in that session. Note: The \Recent system flag is a special case of a session flag. \Recent can not be used as an argument in a STORE or APPEND command, and thus can not be changed at all. 2.3.3. Internal Date Message Attribute The internal date and time of the message on the server. This is not the date and time in the [RFC-5322] header, but rather a date and time which reflects when the message was received. In the case of messages delivered via [SMTP], this SHOULD be the date and time of final delivery of the message as defined by [SMTP]. In the case of messages delivered by the IMAP4rev2 COPY command, this SHOULD be the internal date and time of the source message. In the case of messages delivered by the IMAP4rev2 APPEND command, this SHOULD be the date and time as specified in the APPEND command description. All other cases are implementation defined. 2.3.4. [RFC-5322] Size Message Attribute The number of octets in the message, as expressed in [RFC-5322] format. Melnikov Expires October 28, 2015 [Page 12] Internet-Draft IMAP4rev2 April 2015 2.3.5. Envelope Structure Message Attribute A parsed representation of the [RFC-5322] header of the message. Note that the IMAP Envelope structure is not the same as an [SMTP] envelope. 2.3.6. Body Structure Message Attribute A parsed representation of the [MIME-IMB] body structure information of the message. 2.4. Message Texts In addition to being able to fetch the full [RFC-5322] text of a message, IMAP4rev2 permits the fetching of portions of the full message text. Specifically, it is possible to fetch the [RFC-5322] message header, [RFC-5322] message body, a [MIME-IMB] body part, or a [MIME-IMB] header. 3. State and Flow Diagram Once the connection between client and server is established, an IMAP4rev2 connection is in one of four states. The initial state is identified in the server greeting. Most commands are only valid in certain states. It is a protocol error for the client to attempt a command while the connection is in an inappropriate state, and the server will respond with a BAD or NO (depending upon server implementation) command completion result. 3.1. Not Authenticated State In the not authenticated state, the client MUST supply authentication credentials before most commands will be permitted. This state is entered when a connection starts unless the connection has been pre- authenticated. 3.2. Authenticated State In the authenticated state, the client is authenticated and MUST select a mailbox to access before commands that affect messages will be permitted. This state is entered when a pre-authenticated connection starts, when acceptable authentication credentials have been provided, after an error in selecting a mailbox, or after a successful CLOSE command. Melnikov Expires October 28, 2015 [Page 13] Internet-Draft IMAP4rev2 April 2015 3.3. Selected State In a selected state, a mailbox has been selected to access. This state is entered when a mailbox has been successfully selected. 3.4. Logout State In the logout state, the connection is being terminated. This state can be entered as a result of a client request (via the LOGOUT command) or by unilateral action on the part of either the client or server. If the client requests the logout state, the server MUST send an untagged BYE response and a tagged OK response to the LOGOUT command before the server closes the connection; and the client MUST read the tagged OK response to the LOGOUT command before the client closes the connection. A server MUST NOT unilaterally close the connection without sending an untagged BYE response that contains the reason for having done so. A client SHOULD NOT unilaterally close the connection, and instead SHOULD issue a LOGOUT command. If the server detects that the client has unilaterally closed the connection, the server MAY omit the untagged BYE response and simply close its connection. Melnikov Expires October 28, 2015 [Page 14] Internet-Draft IMAP4rev2 April 2015 +----------------------+ |connection established| +----------------------+ || \/ +--------------------------------------+ | server greeting | +--------------------------------------+ || (1) || (2) || (3) \/ || || +-----------------+ || || |Not Authenticated| || || +-----------------+ || || || (7) || (4) || || || \/ \/ || || +----------------+ || || | Authenticated |<=++ || || +----------------+ || || || || (7) || (5) || (6) || || || \/ || || || || +--------+ || || || || |Selected|==++ || || || +--------+ || || || || (7) || \/ \/ \/ \/ +--------------------------------------+ | Logout | +--------------------------------------+ || \/ +-------------------------------+ |both sides close the connection| +-------------------------------+ (1) connection without pre-authentication (OK greeting) (2) pre-authenticated connection (PREAUTH greeting) (3) rejected connection (BYE greeting) (4) successful LOGIN or AUTHENTICATE command (5) successful SELECT or EXAMINE command (6) CLOSE command, or failed SELECT or EXAMINE command (7) LOGOUT command, server shutdown, or connection closed 4. Data Formats IMAP4rev2 uses textual commands and responses. Data in IMAP4rev2 can be in one of several forms: atom, number, string, parenthesized list, or NIL. Note that a particular data item may take more than one Melnikov Expires October 28, 2015 [Page 15] Internet-Draft IMAP4rev2 April 2015 form; for example, a data item defined as using "astring" syntax may be either an atom or a string. 4.1. Atom An atom consists of one or more non-special characters. 4.1.1. Sequence set and UID set A set of messages can be referenced by a sequence set containing either message sequence numbers or unique identifiers. See Section 9 for details. Sequence sets can contain ranges (e.g. "5:50"), an enumeration of specific message/UID numbers, a special symbol "*", or a combination of the above. A "UID set" is similar to the sequence set of unique identifiers; however, the "*" value for a sequence number is not permitted. 4.2. Number A number consists of one or more digit characters, and represents a numeric value. 4.3. String A string is in one of two forms: either literal or quoted string. The literal form is the general form of string. The quoted string form is an alternative that avoids the overhead of processing a literal at the cost of limitations of characters which may be used. A literal is a sequence of zero or more octets (including CR and LF), prefix-quoted with an octet count in the form of an open brace ("{"), the number of octets, close brace ("}"), and CRLF. In the case of literals transmitted from server to client, the CRLF is immediately followed by the octet data. In the case of literals transmitted from client to server, the client MUST wait to receive a command continuation request (described later in this document) before sending the octet data (and the remainder of the command). A quoted string is a sequence of zero or more 7-bit characters, excluding CR and LF, with double quote (<">) characters at each end. The empty string is represented as either "" (a quoted string with zero characters between double quotes) or as {0} followed by CRLF (a literal with an octet count of 0). Note: Even if the octet count is 0, a client transmitting a literal MUST wait to receive a command continuation request. Melnikov Expires October 28, 2015 [Page 16] Internet-Draft IMAP4rev2 April 2015 4.3.1. 8-bit and Binary Strings 8-bit textual and binary mail is supported through the use of a [MIME-IMB] content transfer encoding. IMAP4rev2 implementations MAY transmit 8-bit or multi-octet characters in literals, but SHOULD do so only when the [CHARSET] is identified. Although a BINARY body encoding is defined, unencoded binary strings are not permitted. A "binary string" is any string with NUL characters. Implementations MUST encode binary data into a textual form, such as BASE64, before transmitting the data. A string with an excessive amount of CTL characters MAY also be considered to be binary. 4.4. Parenthesized List Data structures are represented as a "parenthesized list"; a sequence of data items, delimited by space, and bounded at each end by parentheses. A parenthesized list can contain other parenthesized lists, using multiple levels of parentheses to indicate nesting. The empty list is represented as () -- a parenthesized list with no members. 4.5. NIL The special form "NIL" represents the non-existence of a particular data item that is represented as a string or parenthesized list, as distinct from the empty string "" or the empty parenthesized list (). Note: NIL is never used for any data item which takes the form of an atom. For example, a mailbox name of "NIL" is a mailbox named NIL as opposed to a non-existent mailbox name. This is because mailbox uses "astring" syntax which is an atom or a string. Conversely, an addr-name of NIL is a non-existent personal name, because addr-name uses "nstring" syntax which is NIL or a string, but never an atom. 5. Operational Considerations The following rules are listed here to ensure that all IMAP4rev2 implementations interoperate properly. 5.1. Mailbox Naming Mailbox names are 7-bit. Client implementations MUST NOT attempt to create 8-bit mailbox names, and SHOULD interpret any 8-bit mailbox names returned by LIST or LSUB as UTF-8. Server implementations Melnikov Expires October 28, 2015 [Page 17] Internet-Draft IMAP4rev2 April 2015 SHOULD prohibit the creation of 8-bit mailbox names, and SHOULD NOT return 8-bit mailbox names in LIST or LSUB. See Section 5.1.3 for more information on how to represent non-ASCII mailbox names. Note: 8-bit mailbox names were undefined in earlier versions of this protocol. Some sites used a local 8-bit character set to represent non-ASCII mailbox names. Such usage is not interoperable, and is now formally deprecated. The case-insensitive mailbox name INBOX is a special name reserved to mean "the primary mailbox for this user on this server". The interpretation of all other names is implementation-dependent. In particular, this specification takes no position on case sensitivity in non-INBOX mailbox names. Some server implementations are fully case-sensitive; others preserve case of a newly-created name but otherwise are case-insensitive; and yet others coerce names to a particular case. Client implementations MUST interact with any of these. If a server implementation interprets non-INBOX mailbox names as case-insensitive, it MUST treat names using the international naming convention specially as described in Section 5.1.3. There are certain client considerations when creating a new mailbox name: 1. Any character which is one of the atom-specials (see the Formal Syntax) will require that the mailbox name be represented as a quoted string or literal. 2. CTL and other non-graphic characters are difficult to represent in a user interface and are best avoided. 3. Although the list-wildcard characters ("%" and "*") are valid in a mailbox name, it is difficult to use such mailbox names with the LIST and LSUB commands due to the conflict with wildcard interpretation. 4. Usually, a character (determined by the server implementation) is reserved to delimit levels of hierarchy. 5. Two characters, "#" and "&", have meanings by convention, and should be avoided except when used in that convention. Melnikov Expires October 28, 2015 [Page 18] Internet-Draft IMAP4rev2 April 2015 5.1.1. Mailbox Hierarchy Naming If it is desired to export hierarchical mailbox names, mailbox names MUST be left-to-right hierarchical using a single character to separate levels of hierarchy. The same hierarchy separator character is used for all levels of hierarchy within a single name. 5.1.2. Mailbox Namespace Naming Convention By convention, the first hierarchical element of any mailbox name which begins with "#" identifies the "namespace" of the remainder of the name. This makes it possible to disambiguate between different types of mailbox stores, each of which have their own namespaces. For example, implementations which offer access to USENET newsgroups MAY use the "#news" namespace to partition the USENET newsgroup namespace from that of other mailboxes. Thus, the comp.mail.misc newsgroup would have a mailbox name of "#news.comp.mail.misc", and the name "comp.mail.misc" can refer to a different object (e.g., a user's private mailbox). 5.1.3. Mailbox International Naming Convention By convention, international mailbox names in IMAP4rev2 are specified using a modified version of the UTF-7 encoding described in [UTF-7]. Modified UTF-7 may also be usable in servers that implement an earlier version of this protocol. In modified UTF-7, printable US-ASCII characters, except for "&", represent themselves; that is, characters with octet values 0x20-0x25 and 0x27-0x7e. The character "&" (0x26) is represented by the two- octet sequence "&-". All other characters (octet values 0x00-0x1f and 0x7f-0xff) are represented in modified BASE64, with a further modification from [UTF-7] that "," is used instead of "/". Modified BASE64 MUST NOT be used to represent any printing US-ASCII character which can represent itself. Only characters inside the modified BASE64 alphabet are permitted in modified BASE64 text. "&" is used to shift to modified BASE64 and "-" to shift back to US- ASCII. There is no implicit shift from BASE64 to US-ASCII, and null shifts ("-&" while in BASE64; note that "&-" while in US-ASCII means "&") are not permitted. However, all names start in US-ASCII, and MUST end in US-ASCII; that is, a name that ends with a non-ASCII ISO-10646 character MUST end with a "-"). Melnikov Expires October 28, 2015 [Page 19] Internet-Draft IMAP4rev2 April 2015 The purpose of these modifications is to correct the following problems with UTF-7: 1. UTF-7 uses the "+" character for shifting; this conflicts with the common use of "+" in mailbox names, in particular USENET newsgroup names. 2. UTF-7's encoding is BASE64 which uses the "/" character; this conflicts with the use of "/" as a popular hierarchy delimiter. 3. UTF-7 prohibits the unencoded usage of "\"; this conflicts with the use of "\" as a popular hierarchy delimiter. 4. UTF-7 prohibits the unencoded usage of "~"; this conflicts with the use of "~" in some servers as a home directory indicator. 5. UTF-7 permits multiple alternate forms to represent the same string; in particular, printable US-ASCII characters can be represented in encoded form. Although modified UTF-7 is a convention, it establishes certain requirements on server handling of any mailbox name with an embedded "&" character. In particular, server implementations MUST preserve the exact form of the modified BASE64 portion of a modified UTF-7 name and treat that text as case-sensitive, even if names are otherwise case-insensitive or case-folded. Server implementations SHOULD verify that any mailbox name with an embedded "&" character, used as an argument to CREATE, is: in the correctly modified UTF-7 syntax, has no superfluous shifts, and has no encoding in modified BASE64 of any printing US-ASCII character which can represent itself. However, client implementations MUST NOT depend upon the server doing this, and SHOULD NOT attempt to create a mailbox name with an embedded "&" character unless it complies with the modified UTF-7 syntax. Server implementations which export a mail store that does not follow the modified UTF-7 convention MUST convert to modified UTF-7 any mailbox name that contains either non-ASCII characters or the "&" character. For example, here is a mailbox name which mixes English, Chinese, and Japanese text: ~peter/mail/&U,BTFw-/&ZeVnLIqe- For example, the string "&Jjo!" is not a valid mailbox name because it does not contain a shift to US-ASCII before the "!". The correct form is "&Jjo-!". The string "&U,BTFw-&ZeVnLIqe-" is Melnikov Expires October 28, 2015 [Page 20] Internet-Draft IMAP4rev2 April 2015 not permitted because it contains a superfluous shift. The correct form is "&U,BTF2XlZyyKng-". 5.2. Mailbox Size and Message Status Updates At any time, a server can send data that the client did not request. Sometimes, such behavior is REQUIRED. For example, agents other than the server MAY add messages to the mailbox (e.g., new message delivery), change the flags of the messages in the mailbox (e.g., simultaneous access to the same mailbox by multiple agents), or even remove messages from the mailbox. A server MUST send mailbox size updates automatically if a mailbox size change is observed during the processing of a command. A server SHOULD send message flag updates automatically, without requiring the client to request such updates explicitly. Special rules exist for server notification of a client about the removal of messages to prevent synchronization errors; see the description of the EXPUNGE response for more detail. In particular, it is NOT permitted to send an EXISTS response that would reduce the number of messages in the mailbox; only the EXPUNGE response can do this. Regardless of what implementation decisions a client makes on remembering data from the server, a client implementation MUST record mailbox size updates. It MUST NOT assume that any command after the initial mailbox selection will return the size of the mailbox. 5.3. Response when no Command in Progress Server implementations are permitted to send an untagged response (except for EXPUNGE) while there is no command in progress. Server implementations that send such responses MUST deal with flow control considerations. Specifically, they MUST either (1) verify that the size of the data does not exceed the underlying transport's available window size, or (2) use non-blocking writes. 5.4. Autologout Timer If a server has an inactivity autologout timer that applies to sessions after authentication, the duration of that timer MUST be at least 30 minutes. The receipt of ANY command from the client during that interval SHOULD suffice to reset the autologout timer. Melnikov Expires October 28, 2015 [Page 21] Internet-Draft IMAP4rev2 April 2015 5.5. Multiple Commands in Progress The client MAY send another command without waiting for the completion result response of a command, subject to ambiguity rules (see below) and flow control constraints on the underlying data stream. Similarly, a server MAY begin processing another command before processing the current command to completion, subject to ambiguity rules. However, any command continuation request responses and command continuations MUST be negotiated before any subsequent command is initiated. The exception is if an ambiguity would result because of a command that would affect the results of other commands. Clients MUST NOT send multiple commands without waiting if an ambiguity would result. If the server detects a possible ambiguity, it MUST execute commands to completion in the order given by the client. The most obvious example of ambiguity is when a command would affect the results of another command, e.g., a FETCH of a message's flags and a STORE of that same message's flags. A non-obvious ambiguity occurs with commands that permit an untagged EXPUNGE response (commands other than FETCH, STORE, and SEARCH), since an untagged EXPUNGE response can invalidate sequence numbers in a subsequent command. This is not a problem for FETCH, STORE, or SEARCH commands because servers are prohibited from sending EXPUNGE responses while any of those commands are in progress. Therefore, if the client sends any command other than FETCH, STORE, or SEARCH, it MUST wait for the completion result response before sending a command with message sequence numbers. Note: EXPUNGE responses are permitted while UID FETCH, UID STORE, and UID SEARCH are in progress. If the client sends a UID command, it MUST wait for a completion result response before sending a command which uses message sequence numbers (this may include UID SEARCH). Any message sequence numbers in an argument to UID SEARCH are associated with messages prior to the effect of any untagged EXPUNGE returned by the UID SEARCH. For example, the following non-waiting command sequences are invalid: FETCH + NOOP + STORE STORE + COPY + FETCH COPY + COPY CHECK + FETCH Melnikov Expires October 28, 2015 [Page 22] Internet-Draft IMAP4rev2 April 2015 The following are examples of valid non-waiting command sequences: FETCH + STORE + SEARCH + CHECK STORE + COPY + EXPUNGE UID SEARCH + UID SEARCH may be valid or invalid as a non-waiting command sequence, depending upon whether or not the second UID SEARCH contains message sequence numbers. 6. Client Commands IMAP4rev2 commands are described in this section. Commands are organized by the state in which the command is permitted. Commands which are permitted in multiple states are listed in the minimum permitted state (for example, commands valid in authenticated and selected state are listed in the authenticated state commands). Command arguments, identified by "Arguments:" in the command descriptions below, are described by function, not by syntax. The precise syntax of command arguments is described in the Formal Syntax (Section 9). Some commands cause specific server responses to be returned; these are identified by "Responses:" in the command descriptions below. See the response descriptions in the Responses section for information on these responses, and the Formal Syntax section for the precise syntax of these responses. It is possible for server data to be transmitted as a result of any command. Thus, commands that do not specifically require server data specify "no specific responses for this command" instead of "none". The "Result:" in the command description refers to the possible tagged status responses to a command, and any special interpretation of these status responses. The state of a connection is only changed by successful commands which are documented as changing state. A rejected command (BAD response) never changes the state of the connection or of the selected mailbox. A failed command (NO response) generally does not change the state of the connection or of the selected mailbox; the exception being the SELECT and EXAMINE commands. 6.1. Client Commands - Any State The following commands are valid in any state: CAPABILITY, NOOP, and LOGOUT. Melnikov Expires October 28, 2015 [Page 23] Internet-Draft IMAP4rev2 April 2015 6.1.1. CAPABILITY Command Arguments: none Responses: REQUIRED untagged response: CAPABILITY Result: OK - capability completed BAD - command unknown or arguments invalid The CAPABILITY command requests a listing of capabilities that the server supports. The server MUST send a single untagged CAPABILITY response with "IMAP4rev2" as one of the listed capabilities before the (tagged) OK response. A capability name which begins with "AUTH=" indicates that the server supports that particular authentication mechanism. All such names are, by definition, part of this specification. For example, the authorization capability for an experimental "blurdybloop" authenticator would be "AUTH=XBLURDYBLOOP" and not "XAUTH=BLURDYBLOOP" or "XAUTH=XBLURDYBLOOP". Other capability names refer to extensions, revisions, or amendments to this specification. See the documentation of the CAPABILITY response for additional information. No capabilities, beyond the base IMAP4rev2 set defined in this specification, are enabled without explicit client action to invoke the capability. Client and server implementations MUST implement the STARTTLS, LOGINDISABLED, and AUTH=PLAIN (described in [PLAIN]) capabilities. See the Security Considerations section for important information. See the section entitled "Client Commands - Experimental/Expansion" for information about the form of site or implementation-specific capabilities. Example: C: abcd CAPABILITY S: * CAPABILITY IMAP4rev2 STARTTLS AUTH=GSSAPI LOGINDISABLED S: abcd OK CAPABILITY completed C: efgh STARTTLS S: efgh OK STARTLS completed C: ijkl CAPABILITY S: * CAPABILITY IMAP4rev2 AUTH=GSSAPI AUTH=PLAIN S: ijkl OK CAPABILITY completed Melnikov Expires October 28, 2015 [Page 24] Internet-Draft IMAP4rev2 April 2015 6.1.2. NOOP Command Arguments: none Responses: no specific responses for this command (but see below) Result: OK - noop completed BAD - command unknown or arguments invalid The NOOP command always succeeds. It does nothing. Since any command can return a status update as untagged data, the NOOP command can be used as a periodic poll for new messages or message status updates during a period of inactivity (this is the preferred method to do this). The NOOP command can also be used to reset any inactivity autologout timer on the server. Example: C: a002 NOOP S: a002 OK NOOP completed . . . C: a047 NOOP S: * 22 EXPUNGE S: * 23 EXISTS S: * 3 RECENT S: * 14 FETCH (FLAGS (\Seen \Deleted)) S: a047 OK NOOP completed 6.1.3. LOGOUT Command Arguments: none Responses: REQUIRED untagged response: BYE Result: OK - logout completed BAD - command unknown or arguments invalid The LOGOUT command informs the server that the client is done with the connection. The server MUST send a BYE untagged response before the (tagged) OK response, and then close the network connection. Example: C: A023 LOGOUT S: * BYE IMAP4rev2 Server logging out S: A023 OK LOGOUT completed (Server and client then close the connection) Melnikov Expires October 28, 2015 [Page 25] Internet-Draft IMAP4rev2 April 2015 6.2. Client Commands - Not Authenticated State In the not authenticated state, the AUTHENTICATE or LOGIN command establishes authentication and enters the authenticated state. The AUTHENTICATE command provides a general mechanism for a variety of authentication techniques, privacy protection, and integrity checking; whereas the LOGIN command uses a traditional user name and plaintext password pair and has no means of establishing privacy protection or integrity checking. The STARTTLS command is an alternate form of establishing session privacy protection and integrity checking, but does not establish authentication or enter the authenticated state. Server implementations MAY allow access to certain mailboxes without establishing authentication. This can be done by means of the ANONYMOUS [SASL] authenticator described in [ANONYMOUS]. An older convention is a LOGIN command using the userid "anonymous"; in this case, a password is required although the server may choose to accept any password. The restrictions placed on anonymous users are implementation-dependent. Once authenticated (including as anonymous), it is not possible to re-enter not authenticated state. In addition to the universal commands (CAPABILITY, NOOP, and LOGOUT), the following commands are valid in the not authenticated state: STARTTLS, AUTHENTICATE and LOGIN. See the Security Considerations section for important information about these commands. 6.2.1. STARTTLS Command Arguments: none Responses: no specific response for this command Result: OK - starttls completed, begin TLS negotiation BAD - command unknown or arguments invalid A [TLS] negotiation begins immediately after the CRLF at the end of the tagged OK response from the server. Once a client issues a STARTTLS command, it MUST NOT issue further commands until a server response is seen and the [TLS] negotiation is complete. The server remains in the non-authenticated state, even if client credentials are supplied during the [TLS] negotiation. This does not preclude an authentication mechanism such as EXTERNAL (defined in Melnikov Expires October 28, 2015 [Page 26] Internet-Draft IMAP4rev2 April 2015 [SASL]) from using client identity determined by the [TLS] negotiation. Once [TLS] has been started, the client MUST discard cached information about server capabilities and SHOULD re-issue the CAPABILITY command. This is necessary to protect against man-in- the-middle attacks which alter the capabilities list prior to STARTTLS. The server MAY advertise different capabilities, and in particular SHOULD NOT advertise the STARTTLS capability, after a successful STARTTLS command. Example: C: a001 CAPABILITY S: * CAPABILITY IMAP4rev2 STARTTLS LOGINDISABLED S: a001 OK CAPABILITY completed C: a002 STARTTLS S: a002 OK Begin TLS negotiation now C: a003 CAPABILITY S: * CAPABILITY IMAP4rev2 AUTH=PLAIN S: a003 OK CAPABILITY completed C: a004 LOGIN joe password S: a004 OK LOGIN completed 6.2.2. AUTHENTICATE Command Arguments: authentication mechanism name Responses: continuation data can be requested Result: OK - authenticate completed, now in authenticated state NO - authenticate failure: unsupported authentication mechanism, credentials rejected BAD - command unknown or arguments invalid, authentication exchange cancelled The AUTHENTICATE command indicates a [SASL] authentication mechanism to the server. If the server supports the requested authentication mechanism, it performs an authentication protocol exchange to authenticate and identify the client. It MAY also negotiate an OPTIONAL security layer for subsequent protocol interactions. If the requested authentication mechanism is not supported, the server SHOULD reject the AUTHENTICATE command by sending a tagged NO response. The AUTHENTICATE command does not support the optional "initial response" feature of [SASL]. Section 3 of [SASL] specifies how to handle an authentication mechanism which uses an initial response. Melnikov Expires October 28, 2015 [Page 27] Internet-Draft IMAP4rev2 April 2015 The service name specified by this protocol's profile of [SASL] is "imap". The authentication protocol exchange consists of a series of server challenges and client responses that are specific to the authentication mechanism. A server challenge consists of a command continuation request response with the "+" token followed by a BASE64 encoded string. The client response consists of a single line consisting of a BASE64 encoded string. If the client wishes to cancel an authentication exchange, it issues a line consisting of a single "*". If the server receives such a response, or if it receives an invalid BASE64 string (e.g. characters outside the BASE64 alphabet, or non-terminal "="), it MUST reject the AUTHENTICATE command by sending a tagged BAD response. If a security layer is negotiated through the [SASL] authentication exchange, it takes effect immediately following the CRLF that concludes the authentication exchange for the client, and the CRLF of the tagged OK response for the server. While client and server implementations MUST implement the AUTHENTICATE command itself, it is not required to implement any authentication mechanisms other than the PLAIN mechanism described in [PLAIN]. Also, an authentication mechanism is not required to support any security layers. Note: a server implementation MUST implement a configuration in which it does NOT permit any plaintext password mechanisms, unless either the STARTTLS command has been negotiated or some other mechanism that protects the session from password snooping has been provided. Server sites SHOULD NOT use any configuration which permits a plaintext password mechanism without such a protection mechanism against password snooping. Client and server implementations SHOULD implement additional [SASL] mechanisms that do not use plaintext passwords, such the GSSAPI mechanism described in [SASL] and/or the [DIGEST-MD5] mechanism. Servers and clients can support multiple authentication mechanisms. The server SHOULD list its supported authentication mechanisms in the response to the CAPABILITY command so that the client knows which authentication mechanisms to use. A server MAY include a CAPABILITY response code in the tagged OK response of a successful AUTHENTICATE command in order to send capabilities automatically. It is unnecessary for a client to send a separate CAPABILITY command if it recognizes these automatic capabilities. This should only be done if a security layer was not negotiated by the AUTHENTICATE command, because the tagged OK Melnikov Expires October 28, 2015 [Page 28] Internet-Draft IMAP4rev2 April 2015 response as part of an AUTHENTICATE command is not protected by encryption/integrity checking. [SASL] requires the client to re- issue a CAPABILITY command in this case. The server MAY advertise different capabilities after a successful AUTHENTICATE command. If an AUTHENTICATE command fails with a NO response, the client MAY try another authentication mechanism by issuing another AUTHENTICATE command. It MAY also attempt to authenticate by using the LOGIN command (see Section 6.2.3 for more detail). In other words, the client MAY request authentication types in decreasing order of preference, with the LOGIN command as a last resort. The authorization identity passed from the client to the server during the authentication exchange is interpreted by the server as the user name whose privileges the client is requesting. Example: S: * OK IMAP4rev2 Server C: A001 AUTHENTICATE GSSAPI S: + C: YIIB+wYJKoZIhvcSAQICAQBuggHqMIIB5qADAgEFoQMCAQ6iBw MFACAAAACjggEmYYIBIjCCAR6gAwIBBaESGxB1Lndhc2hpbmd0 b24uZWR1oi0wK6ADAgEDoSQwIhsEaW1hcBsac2hpdmFtcy5jYW Mud2FzaGluZ3Rvbi5lZHWjgdMwgdCgAwIBAaEDAgEDooHDBIHA cS1GSa5b+fXnPZNmXB9SjL8Ollj2SKyb+3S0iXMljen/jNkpJX AleKTz6BQPzj8duz8EtoOuNfKgweViyn/9B9bccy1uuAE2HI0y C/PHXNNU9ZrBziJ8Lm0tTNc98kUpjXnHZhsMcz5Mx2GR6dGknb I0iaGcRerMUsWOuBmKKKRmVMMdR9T3EZdpqsBd7jZCNMWotjhi vd5zovQlFqQ2Wjc2+y46vKP/iXxWIuQJuDiisyXF0Y8+5GTpAL pHDc1/pIGmMIGjoAMCAQGigZsEgZg2on5mSuxoDHEA1w9bcW9n FdFxDKpdrQhVGVRDIzcCMCTzvUboqb5KjY1NJKJsfjRQiBYBdE NKfzK+g5DlV8nrw81uOcP8NOQCLR5XkoMHC0Dr/80ziQzbNqhx O6652Npft0LQwJvenwDI13YxpwOdMXzkWZN/XrEqOWp6GCgXTB vCyLWLlWnbaUkZdEYbKHBPjd8t/1x5Yg== S: + YGgGCSqGSIb3EgECAgIAb1kwV6ADAgEFoQMCAQ+iSzBJoAMC AQGiQgRAtHTEuOP2BXb9sBYFR4SJlDZxmg39IxmRBOhXRKdDA0 uHTCOT9Bq3OsUTXUlk0CsFLoa8j+gvGDlgHuqzWHPSQg== C: S: + YDMGCSqGSIb3EgECAgIBAAD/////6jcyG4GE3KkTzBeBiVHe ceP2CWY0SR0fAQAgAAQEBAQ= C: YDMGCSqGSIb3EgECAgIBAAD/////3LQBHXTpFfZgrejpLlLImP wkhbfa2QteAQAgAG1yYwE= S: A001 OK GSSAPI authentication successful Note: The line breaks within server challenges and client responses are for editorial clarity and are not in real authenticators. Melnikov Expires October 28, 2015 [Page 29] Internet-Draft IMAP4rev2 April 2015 6.2.3. LOGIN Command Arguments: user name password Responses: no specific responses for this command Result: OK - login completed, now in authenticated state NO - login failure: user name or password rejected BAD - command unknown or arguments invalid The LOGIN command identifies the client to the server and carries the plaintext password authenticating this user. A server MAY include a CAPABILITY response code in the tagged OK response to a successful LOGIN command in order to send capabilities automatically. It is unnecessary for a client to send a separate CAPABILITY command if it recognizes these automatic capabilities. Example: C: a001 LOGIN SMITH SESAME S: a001 OK LOGIN completed Note: Use of the LOGIN command over an insecure network (such as the Internet) is a security risk, because anyone monitoring network traffic can obtain plaintext passwords. The LOGIN command SHOULD NOT be used except as a last resort, and it is recommended that client implementations have a means to disable any automatic use of the LOGIN command. Unless either the STARTTLS command has been negotiated or some other mechanism that protects the session from password snooping has been provided, a server implementation MUST implement a configuration in which it advertises the LOGINDISABLED capability and does NOT permit the LOGIN command. Server sites SHOULD NOT use any configuration which permits the LOGIN command without such a protection mechanism against password snooping. A client implementation MUST NOT send a LOGIN command if the LOGINDISABLED capability is advertised. 6.3. Client Commands - Authenticated State In the authenticated state, commands that manipulate mailboxes as atomic entities are permitted. Of these commands, the SELECT and EXAMINE commands will select a mailbox for access and enter the selected state. In addition to the universal commands (CAPABILITY, NOOP, and LOGOUT), the following commands are valid in the authenticated state: ENABLE, Melnikov Expires October 28, 2015 [Page 30] Internet-Draft IMAP4rev2 April 2015 SELECT, EXAMINE, CREATE, DELETE, RENAME, SUBSCRIBE, UNSUBSCRIBE, LIST, LSUB, STATUS, and APPEND. 6.3.1. ENABLE Command Arguments: capability names Responses: no specific responses for this command Result: OK - Relevant capabilities enabled BAD - No arguments, or syntax error in an argument Several IMAP extensions allow the server to return unsolicited responses specific to these extensions in certain circumstances. However, servers cannot send those unsolicited responses (with the exception of response codes included in tagged or untagged OK/NO/BAD responses, which can always be sent) until they know that the clients support such extensions and thus won't choke on the extension response data. The ENABLE command provides an explicit indication from the client that it supports particular extensions. The ENABLE command takes a list of capability names, and requests the server to enable the named extensions. Once enabled using ENABLE, each extension remains active until the IMAP connection is closed. For each argument, the server does the following: o If the argument is not an extension known to the server, the server MUST ignore the argument. o If the argument is an extension known to the server, and it is not specifically permitted to be enabled using ENABLE, the server MUST ignore the argument. (Note that knowing about an extension doesn't necessarily imply supporting that extension.) o If the argument is an extension that is supported by the server and that needs to be enabled, the server MUST enable the extension for the duration of the connection. Note that once an extension is enabled, there is no way to disable it. If the ENABLE command is successful, the server MUST send an untagged ENABLED response Section 7.2.1. Clients SHOULD only include extensions that need to be enabled by the server. For example, a client can enable IMAP4rev2 specific behaviour when both IMAP4rev1 and IMAP4rev2 are advertised in the CAPABILITY response. Future RFCs may add to this list. Melnikov Expires October 28, 2015 [Page 31] Internet-Draft IMAP4rev2 April 2015 The ENABLE command is only valid in the authenticated state, before any mailbox is selected. Clients MUST NOT issue ENABLE once they SELECT/EXAMINE a mailbox; however, server implementations don't have to check that no mailbox is selected or was previously selected during the duration of a connection. The ENABLE command can be issued multiple times in a session. It is additive; i.e., "ENABLE a b", followed by "ENABLE c" is the same as a single command "ENABLE a b c". When multiple ENABLE commands are issued, each corresponding ENABLED response SHOULD only contain extensions enabled by the corresponding ENABLE command. There are no limitations on pipelining ENABLE. For example, it is possible to send ENABLE and then immediately SELECT, or a LOGIN immediately followed by ENABLE. The server MUST NOT change the CAPABILITY list as a result of executing ENABLE; i.e., a CAPABILITY command issued right after an ENABLE command MUST list the same capabilities as a CAPABILITY command issued before the ENABLE command. This is demonstrated in the following example: C: t1 CAPABILITY S: * CAPABILITY IMAP4rev1 ID LITERAL+ ENABLE X-GOOD-IDEA S: t1 OK foo C: t2 ENABLE CONDSTORE X-GOOD-IDEA S: * ENABLED X-GOOD-IDEA S: t2 OK foo C: t3 CAPABILITY S: * CAPABILITY IMAP4rev1 ID LITERAL+ ENABLE X-GOOD-IDEA S: t3 OK foo again In the following example, the client enables CONDSTORE: C: a1 ENABLE CONDSTORE S: * ENABLED CONDSTORE S: a1 OK Conditional Store enabled 6.3.1.1. Note to Designers of Extensions That May Use the ENABLE Command Designers of IMAP extensions are discouraged from creating extensions that require ENABLE unless there is no good alternative design. Specifically, extensions that cause potentially incompatible behavior changes to deployed server responses (and thus benefit from ENABLE) have a higher complexity cost than extensions that do not. Melnikov Expires October 28, 2015 [Page 32] Internet-Draft IMAP4rev2 April 2015 6.3.2. SELECT Command Arguments: mailbox name Responses: REQUIRED untagged responses: FLAGS, EXISTS, RECENT REQUIRED OK untagged responses: UNSEEN (if any unseen exist), PERMANENTFLAGS, UIDNEXT, UIDVALIDITY Result: OK - select completed, now in selected state NO - select failure, now in authenticated state: no such mailbox, can't access mailbox BAD - command unknown or arguments invalid The SELECT command selects a mailbox so that messages in the mailbox can be accessed. Before returning an OK to the client, the server MUST send the following untagged data to the client. Note that earlier versions of this protocol only required the FLAGS, EXISTS, and RECENT untagged data; consequently, client implementations SHOULD implement default behavior for missing data as discussed with the individual item. FLAGS Defined flags in the mailbox. See the description of the FLAGS response for more detail. EXISTS The number of messages in the mailbox. See the description of the EXISTS response for more detail. RECENT The number of messages with the \Recent flag set. See the description of the RECENT response for more detail. OK [UNSEEN ] The message sequence number of the first unseen message in the mailbox. If there are any unseen messages in the mailbox, an UNSEEN response MUST be sent, if not it MUST be omitted. If this is missing, the client can not make any assumptions about the first unseen message in the mailbox, and needs to issue a SEARCH command if it wants to find it. OK [PERMANENTFLAGS ()] A list of message flags that the client can change permanently. If this is missing, the client should assume that all flags can be changed permanently. OK [UIDNEXT ] The next unique identifier value. Refer to Section 2.3.1.1 for more information. If this is missing, the client can not make any assumptions about the next unique identifier value. Melnikov Expires October 28, 2015 [Page 33] Internet-Draft IMAP4rev2 April 2015 OK [UIDVALIDITY ] The unique identifier validity value. Refer to Section 2.3.1.1 for more information. If this is missing, the server does not support unique identifiers. Only one mailbox can be selected at a time in a connection; simultaneous access to multiple mailboxes requires multiple connections. The SELECT command automatically deselects any currently selected mailbox before attempting the new selection. Consequently, if a mailbox is selected and a SELECT command that fails is attempted, no mailbox is selected. If the client is permitted to modify the mailbox, the server SHOULD prefix the text of the tagged OK response with the "[READ-WRITE]" response code. If the client is not permitted to modify the mailbox but is permitted read access, the mailbox is selected as read-only, and the server MUST prefix the text of the tagged OK response to SELECT with the "[READ-ONLY]" response code. Read-only access through SELECT differs from the EXAMINE command in that certain read-only mailboxes MAY permit the change of permanent state on a per-user (as opposed to global) basis. Netnews messages marked in a server-based .newsrc file are an example of such per-user permanent state that can be modified with read-only mailboxes. Example: C: A142 SELECT INBOX S: * 172 EXISTS S: * 1 RECENT S: * OK [UNSEEN 12] Message 12 is first unseen S: * OK [UIDVALIDITY 3857529045] UIDs valid S: * OK [UIDNEXT 4392] Predicted next UID S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) S: * OK [PERMANENTFLAGS (\Deleted \Seen \*)] Limited S: A142 OK [READ-WRITE] SELECT completed 6.3.3. EXAMINE Command Arguments: mailbox name Responses: REQUIRED untagged responses: FLAGS, EXISTS, RECENT REQUIRED OK untagged responses: UNSEEN, PERMANENTFLAGS, UIDNEXT, UIDVALIDITY Result: OK - examine completed, now in selected state NO - examine failure, now in authenticated state: no such mailbox, can't access mailbox BAD - command unknown or arguments invalid Melnikov Expires October 28, 2015 [Page 34] Internet-Draft IMAP4rev2 April 2015 The EXAMINE command is identical to SELECT and returns the same output; however, the selected mailbox is identified as read-only. No changes to the permanent state of the mailbox, including per-user state, are permitted; in particular, EXAMINE MUST NOT cause messages to lose the \Recent flag. The text of the tagged OK response to the EXAMINE command MUST begin with the "[READ-ONLY]" response code. Example: C: A932 EXAMINE blurdybloop S: * 17 EXISTS S: * 2 RECENT S: * OK [UNSEEN 8] Message 8 is first unseen S: * OK [UIDVALIDITY 3857529045] UIDs valid S: * OK [UIDNEXT 4392] Predicted next UID S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) S: * OK [PERMANENTFLAGS ()] No permanent flags permitted S: A932 OK [READ-ONLY] EXAMINE completed 6.3.4. CREATE Command Arguments: mailbox name Responses: no specific responses for this command Result: OK - create completed NO - create failure: can't create mailbox with that name BAD - command unknown or arguments invalid The CREATE command creates a mailbox with the given name. An OK response is returned only if a new mailbox with that name has been created. It is an error to attempt to create INBOX or a mailbox with a name that refers to an extant mailbox. Any error in creation will return a tagged NO response. If the mailbox name is suffixed with the server's hierarchy separator character (as returned from the server by a LIST command), this is a declaration that the client intends to create mailbox names under this name in the hierarchy. Server implementations that do not require this declaration MUST ignore the declaration. In any case, the name created is without the trailing hierarchy delimiter. If the server's hierarchy separator character appears elsewhere in the name, the server SHOULD create any superior hierarchical names that are needed for the CREATE command to be successfully completed. In other words, an attempt to create "foo/bar/zap" on a server in which "/" is the hierarchy separator character SHOULD create foo/ and foo/bar/ if they do not already exist. Melnikov Expires October 28, 2015 [Page 35] Internet-Draft IMAP4rev2 April 2015 If a new mailbox is created with the same name as a mailbox which was deleted, its unique identifiers MUST be greater than any unique identifiers used in the previous incarnation of the mailbox UNLESS the new incarnation has a different unique identifier validity value. See the description of the UID command for more detail. Example: C: A003 CREATE owatagusiam/ S: A003 OK CREATE completed C: A004 CREATE owatagusiam/blurdybloop S: A004 OK CREATE completed Note: The interpretation of this example depends on whether "/" was returned as the hierarchy separator from LIST. If "/" is the hierarchy separator, a new level of hierarchy named "owatagusiam" with a member called "blurdybloop" is created. Otherwise, two mailboxes at the same hierarchy level are created. 6.3.5. DELETE Command Arguments: mailbox name Responses: no specific responses for this command Result: OK - delete completed NO - delete failure: can't delete mailbox with that name BAD - command unknown or arguments invalid The DELETE command permanently removes the mailbox with the given name. A tagged OK response is returned only if the mailbox has been deleted. It is an error to attempt to delete INBOX or a mailbox name that does not exist. The DELETE command MUST NOT remove inferior hierarchical names. For example, if a mailbox "foo" has an inferior "foo.bar" (assuming "." is the hierarchy delimiter character), removing "foo" MUST NOT remove "foo.bar". It is an error to attempt to delete a name that has inferior hierarchical names and also has the \Noselect mailbox name attribute (see the description of the LIST response for more details). It is permitted to delete a name that has inferior hierarchical names and does not have the \Noselect mailbox name attribute. If the server implementation does not permit deleting the name while inferior hierarchical names exists the \Noselect mailbox name attribute is set for that name. In any case, all messages in that mailbox are removed by the DELETE command. Melnikov Expires October 28, 2015 [Page 36] Internet-Draft IMAP4rev2 April 2015 The value of the highest-used unique identifier of the deleted mailbox MUST be preserved so that a new mailbox created with the same name will not reuse the identifiers of the former incarnation, UNLESS the new incarnation has a different unique identifier validity value. See the description of the UID command for more detail. Examples: C: A682 LIST "" * S: * LIST () "/" blurdybloop S: * LIST (\Noselect) "/" foo S: * LIST () "/" foo/bar S: A682 OK LIST completed C: A683 DELETE blurdybloop S: A683 OK DELETE completed C: A684 DELETE foo S: A684 NO Name "foo" has inferior hierarchical names C: A685 DELETE foo/bar S: A685 OK DELETE Completed C: A686 LIST "" * S: * LIST (\Noselect) "/" foo S: A686 OK LIST completed C: A687 DELETE foo S: A687 OK DELETE Completed C: A82 LIST "" * S: * LIST () "." blurdybloop S: * LIST () "." foo S: * LIST () "." foo.bar S: A82 OK LIST completed C: A83 DELETE blurdybloop S: A83 OK DELETE completed C: A84 DELETE foo S: A84 OK DELETE Completed C: A85 LIST "" * S: * LIST () "." foo.bar S: A85 OK LIST completed C: A86 LIST "" % S: * LIST (\Noselect) "." foo S: A86 OK LIST completed 6.3.6. RENAME Command Arguments: existing mailbox name new mailbox name Responses: no specific responses for this command Result: OK - rename completed NO - rename failure: can't rename mailbox with that name, can't rename to mailbox with that name Melnikov Expires October 28, 2015 [Page 37] Internet-Draft IMAP4rev2 April 2015 BAD - command unknown or arguments invalid The RENAME command changes the name of a mailbox. A tagged OK response is returned only if the mailbox has been renamed. It is an error to attempt to rename from a mailbox name that does not exist or to a mailbox name that already exists. Any error in renaming will return a tagged NO response. If the name has inferior hierarchical names, then the inferior hierarchical names MUST also be renamed. For example, a rename of "foo" to "zap" will rename "foo/bar" (assuming "/" is the hierarchy delimiter character) to "zap/bar". If the server's hierarchy separator character appears in the name, the server SHOULD create any superior hierarchical names that are needed for the RENAME command to complete successfully. In other words, an attempt to rename "foo/bar/zap" to baz/rag/zowie on a server in which "/" is the hierarchy separator character SHOULD create baz/ and baz/rag/ if they do not already exist. The value of the highest-used unique identifier of the old mailbox name MUST be preserved so that a new mailbox created with the same name will not reuse the identifiers of the former incarnation, UNLESS the new incarnation has a different unique identifier validity value. See the description of the UID command for more detail. Renaming INBOX is permitted, and has special behavior. It moves all messages in INBOX to a new mailbox with the given name, leaving INBOX empty. If the server implementation supports inferior hierarchical names of INBOX, these are unaffected by a rename of INBOX. Melnikov Expires October 28, 2015 [Page 38] Internet-Draft IMAP4rev2 April 2015 Examples: C: A682 LIST "" * S: * LIST () "/" blurdybloop S: * LIST (\Noselect) "/" foo S: * LIST () "/" foo/bar S: A682 OK LIST completed C: A683 RENAME blurdybloop sarasoop S: A683 OK RENAME completed C: A684 RENAME foo zowie S: A684 OK RENAME Completed C: A685 LIST "" * S: * LIST () "/" sarasoop S: * LIST (\Noselect) "/" zowie S: * LIST () "/" zowie/bar S: A685 OK LIST completed C: Z432 LIST "" * S: * LIST () "." INBOX S: * LIST () "." INBOX.bar S: Z432 OK LIST completed C: Z433 RENAME INBOX old-mail S: Z433 OK RENAME completed C: Z434 LIST "" * S: * LIST () "." INBOX S: * LIST () "." INBOX.bar S: * LIST () "." old-mail S: Z434 OK LIST completed 6.3.7. SUBSCRIBE Command Arguments: mailbox Responses: no specific responses for this command Result: OK - subscribe completed NO - subscribe failure: can't subscribe to that name BAD - command unknown or arguments invalid The SUBSCRIBE command adds the specified mailbox name to the server's set of "active" or "subscribed" mailboxes as returned by the LSUB command. This command returns a tagged OK response only if the subscription is successful. A server MAY validate the mailbox argument to SUBSCRIBE to verify that it exists. However, it MUST NOT unilaterally remove an existing mailbox name from the subscription list even if a mailbox by that name no longer exists. Melnikov Expires October 28, 2015 [Page 39] Internet-Draft IMAP4rev2 April 2015 Note: This requirement is because a server site can choose to routinely remove a mailbox with a well-known name (e.g., "system- alerts") after its contents expire, with the intention of recreating it when new contents are appropriate. Example: C: A002 SUBSCRIBE #news.comp.mail.mime S: A002 OK SUBSCRIBE completed 6.3.8. UNSUBSCRIBE Command Arguments: mailbox name Responses: no specific responses for this command Result: OK - unsubscribe completed NO - unsubscribe failure: can't unsubscribe that name BAD - command unknown or arguments invalid The UNSUBSCRIBE command removes the specified mailbox name from the server's set of "active" or "subscribed" mailboxes as returned by the LSUB command. This command returns a tagged OK response only if the unsubscription is successful. Example: C: A002 UNSUBSCRIBE #news.comp.mail.mime S: A002 OK UNSUBSCRIBE completed 6.3.9. LIST Command Arguments: reference name mailbox name with possible wildcards Responses: untagged responses: LIST Result: OK - list completed NO - list failure: can't list that reference or name BAD - command unknown or arguments invalid The LIST command returns a subset of names from the complete set of all names available to the client. Zero or more untagged LIST replies are returned, containing the name attributes, hierarchy delimiter, and name; see the description of the LIST reply for more detail. The LIST command SHOULD return its data quickly, without undue delay. For example, it SHOULD NOT go to excess trouble to calculate the \Marked or \Unmarked status or perform other processing; if each name requires 1 second of processing, then a list of 1200 names would take 20 minutes! Melnikov Expires October 28, 2015 [Page 40] Internet-Draft IMAP4rev2 April 2015 An empty ("" string) reference name argument indicates that the mailbox name is interpreted as by SELECT. The returned mailbox names MUST match the supplied mailbox name pattern. A non-empty reference name argument is the name of a mailbox or a level of mailbox hierarchy, and indicates the context in which the mailbox name is interpreted. An empty ("" string) mailbox name argument is a special request to return the hierarchy delimiter and the root name of the name given in the reference. The value returned as the root MAY be the empty string if the reference is non-rooted or is an empty string. In all cases, a hierarchy delimiter (or NIL if there is no hierarchy) is returned. This permits a client to get the hierarchy delimiter (or find out that the mailbox names are flat) even when no mailboxes by that name currently exist. The reference and mailbox name arguments are interpreted into a canonical form that represents an unambiguous left-to-right hierarchy. The returned mailbox names will be in the interpreted form. Note: The interpretation of the reference argument is implementation-defined. It depends upon whether the server implementation has a concept of the "current working directory" and leading "break out characters", which override the current working directory. For example, on a server which exports a UNIX or NT filesystem, the reference argument contains the current working directory, and the mailbox name argument would contain the name as interpreted in the current working directory. If a server implementation has no concept of break out characters, the canonical form is normally the reference name appended with the mailbox name. Note that if the server implements the namespace convention (Section 5.1.2), "#" is a break out character and must be treated as such. If the reference argument is not a level of mailbox hierarchy (that is, it is a \NoInferiors name), and/or the reference argument does not end with the hierarchy delimiter, it is implementation-dependent how this is interpreted. For example, a reference of "foo/bar" and mailbox name of "rag/baz" could be interpreted as "foo/bar/rag/baz", "foo/barrag/baz", or "foo/rag/ baz". A client SHOULD NOT use such a reference argument except at the explicit request of the user. A hierarchical browser MUST NOT make any assumptions about server interpretation of the reference Melnikov Expires October 28, 2015 [Page 41] Internet-Draft IMAP4rev2 April 2015 unless the reference is a level of mailbox hierarchy AND ends with the hierarchy delimiter. Any part of the reference argument that is included in the interpreted form SHOULD prefix the interpreted form. It SHOULD also be in the same form as the reference name argument. This rule permits the client to determine if the returned mailbox name is in the context of the reference argument, or if something about the mailbox argument overrode the reference argument. Without this rule, the client would have to have knowledge of the server's naming semantics including what characters are "breakouts" that override a naming context. For example, here are some examples of how references and mailbox names might be interpreted on a UNIX-based server: Reference Mailbox Name Interpretation ------------ ------------ -------------- ~smith/Mail/ foo.* ~smith/Mail/foo.* archive/ % archive/% #news. comp.mail.* #news.comp.mail.* ~smith/Mail/ /usr/doc/foo /usr/doc/foo archive/ ~fred/Mail/* ~fred/Mail/* The first three examples demonstrate interpretations in the context of the reference argument. Note that "~smith/Mail" SHOULD NOT be transformed into something like "/u2/users/smith/Mail", or it would be impossible for the client to determine that the interpretation was in the context of the reference. The character "*" is a wildcard, and matches zero or more characters at this position. The character "%" is similar to "*", but it does not match a hierarchy delimiter. If the "%" wildcard is the last character of a mailbox name argument, matching levels of hierarchy are also returned. If these levels of hierarchy are not also selectable mailboxes, they are returned with the \Noselect mailbox name attribute (see the description of the LIST response for more details). Server implementations are permitted to "hide" otherwise accessible mailboxes from the wildcard characters, by preventing certain characters or names from matching a wildcard in certain situations. For example, a UNIX-based server might restrict the interpretation of "*" so that an initial "/" character does not match. Melnikov Expires October 28, 2015 [Page 42] Internet-Draft IMAP4rev2 April 2015 The special name INBOX is included in the output from LIST, if INBOX is supported by this server for this user and if the uppercase string "INBOX" matches the interpreted reference and mailbox name arguments with wildcards as described above. The criteria for omitting INBOX is whether SELECT INBOX will return failure; it is not relevant whether the user's real INBOX resides on this or some other server. Example: C: A101 LIST "" "" S: * LIST (\Noselect) "/" "" S: A101 OK LIST Completed C: A102 LIST #news.comp.mail.misc "" S: * LIST (\Noselect) "." #news. S: A102 OK LIST Completed C: A103 LIST /usr/staff/jones "" S: * LIST (\Noselect) "/" / S: A103 OK LIST Completed C: A202 LIST ~/Mail/ % S: * LIST (\Noselect) "/" ~/Mail/foo S: * LIST () "/" ~/Mail/meetings S: A202 OK LIST completed 6.3.10. LSUB Command Arguments: reference name mailbox name with possible wildcards Responses: untagged responses: LSUB Result: OK - lsub completed NO - lsub failure: can't list that reference or name BAD - command unknown or arguments invalid The LSUB command returns a subset of names from the set of names that the user has declared as being "active" or "subscribed". Zero or more untagged LSUB replies are returned. The arguments to LSUB are in the same form as those for LIST. The returned untagged LSUB response MAY contain different mailbox flags from a LIST untagged response. If this should happen, the flags in the untagged LIST are considered more authoritative. A special situation occurs when using LSUB with the % wildcard. Consider what happens if "foo/bar" (with a hierarchy delimiter of "/") is subscribed but "foo" is not. A "%" wildcard to LSUB must return foo, not foo/bar, in the LSUB response, and it MUST be flagged with the \Noselect attribute. Melnikov Expires October 28, 2015 [Page 43] Internet-Draft IMAP4rev2 April 2015 The server MUST NOT unilaterally remove an existing mailbox name from the subscription list even if a mailbox by that name no longer exists. Example: C: A002 LSUB "#news." "comp.mail.*" S: * LSUB () "." #news.comp.mail.mime S: * LSUB () "." #news.comp.mail.misc S: A002 OK LSUB completed C: A003 LSUB "#news." "comp.%" S: * LSUB (\NoSelect) "." #news.comp.mail S: A003 OK LSUB completed 6.3.11. STATUS Command Arguments: mailbox name status data item names Responses: REQUIRED untagged responses: STATUS Result: OK - status completed NO - status failure: no status for that name BAD - command unknown or arguments invalid The STATUS command requests the status of the indicated mailbox. It does not change the currently selected mailbox, nor does it affect the state of any messages in the queried mailbox (in particular, STATUS MUST NOT cause messages to lose the \Recent flag). The STATUS command provides an alternative to opening a second IMAP4rev2 connection and doing an EXAMINE command on a mailbox to query that mailbox's status without deselecting the current mailbox in the first IMAP4rev2 connection. Unlike the LIST command, the STATUS command is not guaranteed to be fast in its response. Under certain circumstances, it can be quite slow. In some implementations, the server is obliged to open the mailbox read-only internally to obtain certain status information. Also unlike the LIST command, the STATUS command does not accept wildcards. Note: The STATUS command is intended to access the status of mailboxes other than the currently selected mailbox. Because the STATUS command can cause the mailbox to be opened internally, and because this information is available by other means on the selected mailbox, the STATUS command SHOULD NOT be used on the currently selected mailbox. Melnikov Expires October 28, 2015 [Page 44] Internet-Draft IMAP4rev2 April 2015 The STATUS command MUST NOT be used as a "check for new messages in the selected mailbox" operation (refer to sections 7, Section 7.3.1, and Section 7.3.2 for more information about the proper method for new message checking). Because the STATUS command is not guaranteed to be fast in its results, clients SHOULD NOT expect to be able to issue many consecutive STATUS commands and obtain reasonable performance. The currently defined status data items that can be requested are: MESSAGES The number of messages in the mailbox. RECENT The number of messages with the \Recent flag set. UIDNEXT The next unique identifier value of the mailbox. Refer to Section 2.3.1.1 for more information. UIDVALIDITY The unique identifier validity value of the mailbox. Refer to Section 2.3.1.1 for more information. UNSEEN The number of messages which do not have the \Seen flag set. Example: C: A042 STATUS blurdybloop (UIDNEXT MESSAGES) S: * STATUS blurdybloop (MESSAGES 231 UIDNEXT 44292) S: A042 OK STATUS completed 6.3.12. APPEND Command Arguments: mailbox name OPTIONAL flag parenthesized list OPTIONAL date/time string message literal Responses: no specific responses for this command Result: OK - append completed NO - append error: can't append to that mailbox, error in flags or date/time or message text BAD - command unknown or arguments invalid The APPEND command appends the literal argument as a new message to the end of the specified destination mailbox. This argument SHOULD be in the format of an [RFC-5322] message. 8-bit characters are permitted in the message. A server implementation that is unable to preserve 8-bit data properly MUST be able to reversibly convert 8-bit APPEND data to 7-bit using a [MIME-IMB] content transfer encoding. Melnikov Expires October 28, 2015 [Page 45] Internet-Draft IMAP4rev2 April 2015 Note: There may be exceptions, e.g., draft messages, in which required [RFC-5322] header lines are omitted in the message literal argument to APPEND. The full implications of doing so must be understood and carefully weighed. If a flag parenthesized list is specified, the flags SHOULD be set in the resulting message; otherwise, the flag list of the resulting message is set to empty by default. In either case, the Recent flag is also set. If a date-time is specified, the internal date SHOULD be set in the resulting message; otherwise, the internal date of the resulting message is set to the current date and time by default. If the append is unsuccessful for any reason, the mailbox MUST be restored to its state before the APPEND attempt; no partial appending is permitted. If the destination mailbox does not exist, a server MUST return an error, and MUST NOT automatically create the mailbox. Unless it is certain that the destination mailbox can not be created, the server MUST send the response code "[TRYCREATE]" as the prefix of the text of the tagged NO response. This gives a hint to the client that it can attempt a CREATE command and retry the APPEND if the CREATE is successful. On successful completion of an APPEND, the server SHOULD return an APPENDUID response code. In the case of a mailbox that has permissions set so that the client can APPEND to the mailbox, but not SELECT or EXAMINE it, the server SHOULD NOT send an APPENDUID response code as it would disclose information about the mailbox. In the case of a mailbox that has UIDNOTSTICKY status (see UIDNOTSTICKY response code definition), the server MAY omit the APPENDUID response code as it is not meaningful. If the server does not return the APPENDUID response codes, the client can discover this information by selecting the destination mailbox. The location of messages placed in the destination mailbox by APPEND can be determined by using FETCH and/or SEARCH commands (e.g., for Message-ID or some unique marker placed in the message in an APPEND). If the mailbox is currently selected, the normal new message actions SHOULD occur. Specifically, the server SHOULD notify the client immediately via an untagged EXISTS response. If the server does not Melnikov Expires October 28, 2015 [Page 46] Internet-Draft IMAP4rev2 April 2015 do so, the client MAY issue a NOOP command (or failing that, a CHECK command) after one or more APPEND commands. Example: C: A003 APPEND saved-messages (\Seen) {310} S: + Ready for literal data C: Date: Mon, 7 Feb 1994 21:52:25 -0800 (PST) C: From: Fred Foobar C: Subject: afternoon meeting C: To: mooch@owatagu.siam.edu C: Message-Id: C: MIME-Version: 1.0 C: Content-Type: TEXT/PLAIN; CHARSET=US-ASCII C: C: Hello Joe, do you think we can meet at 3:30 tomorrow? C: S: A003 OK APPEND completed Example: C: A003 APPEND saved-messages (\Seen) {297} C: Date: Mon, 7 Feb 1994 21:52:25 -0800 (PST) C: From: Fred Foobar C: Subject: afternoon meeting C: To: mooch@example.com C: Message-Id: C: MIME-Version: 1.0 C: Content-Type: TEXT/PLAIN; CHARSET=US-ASCII C: C: Hello Joe, do you think we can meet at 3:30 tomorrow? C: S: A003 OK [APPENDUID 38505 3955] APPEND completed C: A004 COPY 2:4 meeting S: A004 OK [COPYUID 38505 304,319:320 3956:3958] Done C: A005 UID COPY 305:310 meeting S: A005 OK No matching messages, so nothing copied C: A006 COPY 2 funny S: A006 OK Done C: A007 SELECT funny S: * 1 EXISTS S: * 1 RECENT S: * OK [UNSEEN 1] Message 1 is first unseen S: * OK [UIDVALIDITY 3857529045] Validity session-only S: * OK [UIDNEXT 2] Predicted next UID S: * NO [UIDNOTSTICKY] Non-persistent UIDs S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) S: * OK [PERMANENTFLAGS (\Deleted \Seen)] Limited S: A007 OK [READ-WRITE] SELECT completed In this example, A003 and A004 demonstrate successful appending and copying to a mailbox that returns the UIDs assigned to the messages. Melnikov Expires October 28, 2015 [Page 47] Internet-Draft IMAP4rev2 April 2015 A005 is an example in which no messages were copied; this is because in A003, we see that message 2 had UID 304, and message 3 had UID 319; therefore, UIDs 305 through 310 do not exist (refer to Section 2.3.1.1 for further explanation). A006 is an example of a message being copied that did not return a COPYUID; and, as expected, A007 shows that the mail store containing that mailbox does not support persistent UIDs. Note: The APPEND command is not used for message delivery, because it does not provide a mechanism to transfer [SMTP] envelope information. 6.4. Client Commands - Selected State In the selected state, commands that manipulate messages in a mailbox are permitted. In addition to the universal commands (CAPABILITY, NOOP, and LOGOUT), and the authenticated state commands (SELECT, EXAMINE, CREATE, DELETE, RENAME, SUBSCRIBE, UNSUBSCRIBE, LIST, LSUB, STATUS, and APPEND), the following commands are valid in the selected state: CHECK, CLOSE, UNSELECT, EXPUNGE, SEARCH, FETCH, STORE, COPY, and UID. 6.4.1. CHECK Command Arguments: none Responses: no specific responses for this command Result: OK - check completed BAD - command unknown or arguments invalid The CHECK command requests a checkpoint of the currently selected mailbox. A checkpoint refers to any implementation-dependent housekeeping associated with the mailbox (e.g., resolving the server's in-memory state of the mailbox with the state on its disk) that is not normally executed as part of each command. A checkpoint MAY take a non-instantaneous amount of real time to complete. If a server implementation has no such housekeeping considerations, CHECK is equivalent to NOOP. There is no guarantee that an EXISTS untagged response will happen as a result of CHECK. NOOP, not CHECK, SHOULD be used for new message polling. Example: C: FXXZ CHECK S: FXXZ OK CHECK Completed Melnikov Expires October 28, 2015 [Page 48] Internet-Draft IMAP4rev2 April 2015 6.4.2. CLOSE Command Arguments: none Responses: no specific responses for this command Result: OK - close completed, now in authenticated state BAD - command unknown or arguments invalid The CLOSE command permanently removes all messages that have the \Deleted flag set from the currently selected mailbox, and returns to the authenticated state from the selected state. No untagged EXPUNGE responses are sent. No messages are removed, and no error is given, if the mailbox is selected by an EXAMINE command or is otherwise selected read-only. Even if a mailbox is selected, a SELECT, EXAMINE, or LOGOUT command MAY be issued without previously issuing a CLOSE command. The SELECT, EXAMINE, and LOGOUT commands implicitly close the currently selected mailbox without doing an expunge. However, when many messages are deleted, a CLOSE-LOGOUT or CLOSE-SELECT sequence is considerably faster than an EXPUNGE-LOGOUT or EXPUNGE-SELECT because no untagged EXPUNGE responses (which the client would probably ignore) are sent. Example: C: A341 CLOSE S: A341 OK CLOSE completed 6.4.3. UNSELECT Command Arguments: none Responses: no specific responses for this command Result: OK - unselect completed, now in authenticated state BAD - no mailbox selected, or argument supplied but none permitted The UNSELECT command frees server's resources associated with the selected mailbox and returns the server to the authenticated state. This command performs the same actions as CLOSE, except that no messages are permanently removed from the currently selected mailbox. Example: C: A342 UNSELECT S: A342 OK Unselect completed Melnikov Expires October 28, 2015 [Page 49] Internet-Draft IMAP4rev2 April 2015 6.4.4. EXPUNGE Command Arguments: none Responses: untagged responses: EXPUNGE Result: OK - expunge completed NO - expunge failure: can't expunge (e.g., permission denied) BAD - command unknown or arguments invalid The EXPUNGE command permanently removes all messages that have the \Deleted flag set from the currently selected mailbox. Before returning an OK to the client, an untagged EXPUNGE response is sent for each message that is removed. Note that if any messages with the \Recent flag set are expunged, an untagged RECENT response is sent after the untagged EXPUNGE(s) to update the client's count of RECENT messages. Example: C: A202 EXPUNGE S: * 3 EXPUNGE S: * 3 EXPUNGE S: * 5 EXPUNGE S: * 8 EXPUNGE S: A202 OK EXPUNGE completed Note: In this example, messages 3, 4, 7, and 11 had the \Deleted flag set. See the description of the EXPUNGE response for further explanation. 6.4.5. SEARCH Command Arguments: OPTIONAL result specifier OPTIONAL [CHARSET] specification searching criteria (one or more) Responses: REQUIRED untagged response: ESEARCH Result: OK - search completed NO - search error: can't search that [CHARSET] or criteria BAD - command unknown or arguments invalid The SEARCH command searches the mailbox for messages that match the given searching criteria. The SEARCH command may contain result options. Result options control what kind of information is returned about messages matching Melnikov Expires October 28, 2015 [Page 50] Internet-Draft IMAP4rev2 April 2015 the search criteria in an untagged ESEARCH response. If no result option is specified or empty list of options is specified "()", ALL is assumed (see below). The order of individual options is arbitrary. Individual options may contain parameters enclosed in parentheses (*). If an option has parameters, they consist of atoms and/or strings and/or lists in a specific order. Any options not defined by extensions that the server supports must be rejected with a BAD response. (*) - if an option has a mandatory parameter, which can always be represented as a number or a sequence-set, the option parameter does not need the enclosing (). See ABNF for more details. This document specifies the following result options: MIN Return the lowest message number/UID that satisfies the SEARCH criteria. If the SEARCH results in no matches, the server MUST NOT include the MIN result option in the ESEARCH response; however, it still MUST send the ESEARCH response. MAX Return the highest message number/UID that satisfies the SEARCH criteria. If the SEARCH results in no matches, the server MUST NOT include the MAX result option in the ESEARCH response; however, it still MUST send the ESEARCH response. ALL Return all message numbers/UIDs that satisfy the SEARCH criteria using the sequence-set syntax. Note, the client MUST NOT assume that messages/UIDs will be listed in any particular order. If the SEARCH results in no matches, the server MUST NOT include the ALL result option in the ESEARCH response; however, it still MUST send the ESEARCH response. COUNT Return number of the messages that satisfy the SEARCH criteria. This result option MUST always be included in the ESEARCH response. Melnikov Expires October 28, 2015 [Page 51] Internet-Draft IMAP4rev2 April 2015 Note: future extensions to this document can allow servers to return multiple ESEARCH responses for a single extended SEARCH command. However all options specified above REQUIRE a single ESEARCH response. These extensions will have to describe how results from multiple ESEARCH responses are to be amalgamated. Searching criteria consist of one or more search keys. When multiple keys are specified, the result is the intersection (AND function) of all the messages that match those keys. For example, the criteria DELETED FROM "SMITH" SINCE 1-Feb-1994 refers to all deleted messages from Smith that were placed in the mailbox since February 1, 1994. A search key can also be a parenthesized list of one or more search keys (e.g., for use with the OR and NOT keys). Server implementations MAY exclude [MIME-IMB] body parts with terminal content media types other than TEXT and MESSAGE from consideration in SEARCH matching. The OPTIONAL [CHARSET] specification consists of the word "CHARSET" followed by a registered [CHARSET]. It indicates the [CHARSET] of the strings that appear in the search criteria. [MIME-IMB] content transfer encodings, and [MIME-HDRS] strings in [RFC-5322]/[MIME-IMB] headers, MUST be decoded before comparing text. US-ASCII MUST be supported; other [CHARSET]s MAY be supported. If the server does not support the specified [CHARSET], it MUST return a tagged NO response (not a BAD). This response SHOULD contain the BADCHARSET response code, which MAY list the [CHARSET]s supported by the server. In all search keys that use strings, a message matches the key if the string is a substring of the associated text. The matching is case- insensitive. Note that the empty string is a substring; this is useful when doing a HEADER search. The defined search keys are as follows. Refer to the Formal Syntax section for the precise syntactic definitions of the arguments. Messages with message sequence numbers corresponding to the specified message sequence number set. ALL All messages in the mailbox; the default initial key for ANDing. ANSWERED Messages with the \Answered flag set. BCC Messages that contain the specified string in the envelope structure's BCC field. Melnikov Expires October 28, 2015 [Page 52] Internet-Draft IMAP4rev2 April 2015 BEFORE Messages whose internal date (disregarding time and timezone) is earlier than the specified date. BODY Messages that contain the specified string in the body of the message. CC Messages that contain the specified string in the envelope structure's CC field. DELETED Messages with the \Deleted flag set. DRAFT Messages with the \Draft flag set. FLAGGED Messages with the \Flagged flag set. FROM Messages that contain the specified string in the envelope structure's FROM field. HEADER Messages that have a header with the specified field-name (as defined in [RFC-5322]) and that contains the specified string in the text of the header (what comes after the colon). If the string to search is zero-length, this matches all messages that have a header line with the specified field-name regardless of the contents. KEYWORD Messages with the specified keyword flag set. LARGER Messages with an [RFC-5322] size larger than the specified number of octets. NEW Messages that have the \Recent flag set but not the \Seen flag. This is functionally equivalent to "(RECENT UNSEEN)". NOT Messages that do not match the specified search key. OLD Messages that do not have the \Recent flag set. This is functionally equivalent to "NOT RECENT" (as opposed to "NOT NEW"). ON Messages whose internal date (disregarding time and timezone) is within the specified date. OR Messages that match either search key. RECENT Messages that have the \Recent flag set. SEEN Messages that have the \Seen flag set. Melnikov Expires October 28, 2015 [Page 53] Internet-Draft IMAP4rev2 April 2015 SENTBEFORE Messages whose [RFC-5322] Date: header (disregarding time and timezone) is earlier than the specified date. SENTON Messages whose [RFC-5322] Date: header (disregarding time and timezone) is within the specified date. SENTSINCE Messages whose [RFC-5322] Date: header (disregarding time and timezone) is within or later than the specified date. SINCE Messages whose internal date (disregarding time and timezone) is within or later than the specified date. SMALLER Messages with an [RFC-5322] size smaller than the specified number of octets. SUBJECT Messages that contain the specified string in the envelope structure's SUBJECT field. TEXT Messages that contain the specified string in the header or body of the message. TO Messages that contain the specified string in the envelope structure's TO field. UID Messages with unique identifiers corresponding to the specified unique identifier set. Sequence set ranges are permitted. UNANSWERED Messages that do not have the \Answered flag set. UNDELETED Messages that do not have the \Deleted flag set. UNDRAFT Messages that do not have the \Draft flag set. UNFLAGGED Messages that do not have the \Flagged flag set. UNKEYWORD Messages that do not have the specified keyword flag set. UNSEEN Messages that do not have the \Seen flag set. Melnikov Expires October 28, 2015 [Page 54] Internet-Draft IMAP4rev2 April 2015 Example: C: A282 SEARCH RETURN (MIN COUNT) FLAGGED SINCE 1-Feb-1994 NOT FROM "Smith" S: * ESEARCH (TAG "A282") MIN 2 COUNT 3 S: A282 OK SEARCH completed Example: C: A283 SEARCH RETURN () FLAGGED SINCE 1-Feb-1994 NOT FROM "Smith" S: * ESEARCH (TAG "A283") ALL 2,10:11 S: A283 OK SEARCH completed Example: C: A284 SEARCH TEXT "string not in mailbox" S: * ESEARCH (TAG "A284") S: A284 OK SEARCH completed C: A285 SEARCH CHARSET UTF-8 TEXT {6} S: + Ready for literal text C: XXXXXX S: * ESEARCH (TAG "A285") ALL 43 S: A285 OK SEARCH completed Note: Since this document is restricted to 7-bit ASCII text, it is not possible to show actual UTF-8 data. The "XXXXXX" is a placeholder for what would be 6 octets of 8-bit data in an actual transaction. The following example demonstrates finding the first unseen message as returned in the UNSEEN response code on a successful SELECT command: Example: C: A284 SEARCH RETURN (MIN) UNSEEN S: * ESEARCH (TAG "A284") MIN 4 S: A284 OK SEARCH completed The following example demonstrates that if the ESEARCH UID indicator is present, all data in the ESEARCH response is referring to UIDs; for example, the MIN result specifier will be followed by a UID. Example: C: A285 UID SEARCH RETURN (MIN MAX) 1:5000 S: * ESEARCH (TAG "A285") UID MIN 7 MAX 3800 S: A285 OK SEARCH completed The following example demonstrates returning the number of deleted messages: Example: C: A286 SEARCH RETURN (COUNT) DELETED S: * ESEARCH (TAG "A286") COUNT 15 S: A286 OK SEARCH completed Melnikov Expires October 28, 2015 [Page 55] Internet-Draft IMAP4rev2 April 2015 6.4.6. FETCH Command Arguments: sequence set message data item names or macro Responses: untagged responses: FETCH Result: OK - fetch completed NO - fetch error: can't fetch that data BAD - command unknown or arguments invalid The FETCH command retrieves data associated with a message in the mailbox. The data items to be fetched can be either a single atom or a parenthesized list. Most data items, identified in the formal syntax under the msg-att- static rule, are static and MUST NOT change for any particular message. Other data items, identified in the formal syntax under the msg-att-dynamic rule, MAY change, either as a result of a STORE command or due to external events. For example, if a client receives an ENVELOPE for a message when it already knows the envelope, it can safely ignore the newly transmitted envelope. There are three macros which specify commonly-used sets of data items, and can be used instead of data items. A macro must be used by itself, and not in conjunction with other macros or data items. ALL Macro equivalent to: (FLAGS INTERNALDATE RFC822.SIZE ENVELOPE) FAST Macro equivalent to: (FLAGS INTERNALDATE RFC822.SIZE) FULL Macro equivalent to: (FLAGS INTERNALDATE RFC822.SIZE ENVELOPE BODY) The currently defined data items that can be fetched are: BODY Non-extensible form of BODYSTRUCTURE. BODY[
]<> The text of a particular body section. The section specification is a set of zero or more part specifiers delimited by periods. A part specifier is either a part number or one of the following: HEADER, HEADER.FIELDS, HEADER.FIELDS.NOT, MIME, and TEXT. An empty section Melnikov Expires October 28, 2015 [Page 56] Internet-Draft IMAP4rev2 April 2015 specification refers to the entire message, including the header. Every message has at least one part number. Non-[MIME-IMB] messages, and non-multipart [MIME-IMB] messages with no encapsulated message, only have a part 1. Multipart messages are assigned consecutive part numbers, as they occur in the message. If a particular part is of type message or multipart, its parts MUST be indicated by a period followed by the part number within that nested multipart part. A part of type MESSAGE/RFC822 also has nested part numbers, referring to parts of the MESSAGE part's body. The HEADER, HEADER.FIELDS, HEADER.FIELDS.NOT, and TEXT part specifiers can be the sole part specifier or can be prefixed by one or more numeric part specifiers, provided that the numeric part specifier refers to a part of type MESSAGE/RFC822. The MIME part specifier MUST be prefixed by one or more numeric part specifiers. The HEADER, HEADER.FIELDS, and HEADER.FIELDS.NOT part specifiers refer to the [RFC-5322] header of the message or of an encapsulated [MIME-IMT] MESSAGE/RFC822 message. HEADER.FIELDS and HEADER.FIELDS.NOT are followed by a list of field-name (as defined in [RFC-5322]) names, and return a subset of the header. The subset returned by HEADER.FIELDS contains only those header fields with a field-name that matches one of the names in the list; similarly, the subset returned by HEADER.FIELDS.NOT contains only the header fields with a non-matching field-name. The field-matching is case- insensitive but otherwise exact. Subsetting does not exclude the [RFC-5322] delimiting blank line between the header and the body; the blank line is included in all header fetches, except in the case of a message which has no body and no blank line. The MIME part specifier refers to the [MIME-IMB] header for this part. The TEXT part specifier refers to the text body of the message, omitting the [RFC-5322] header. Here is an example of a complex message with some of its part specifiers: Melnikov Expires October 28, 2015 [Page 57] Internet-Draft IMAP4rev2 April 2015 HEADER ([RFC-5322] header of the message) TEXT ([RFC-5322] text body of the message) MULTIPART/MIXED 1 TEXT/PLAIN 2 APPLICATION/OCTET-STREAM 3 MESSAGE/RFC822 3.HEADER ([RFC-5322] header of the message) 3.TEXT ([RFC-5322] text body of the message) MULTIPART/MIXED 3.1 TEXT/PLAIN 3.2 APPLICATION/OCTET-STREAM 4 MULTIPART/MIXED 4.1 IMAGE/GIF 4.1.MIME ([MIME-IMB] header for the IMAGE/GIF) 4.2 MESSAGE/RFC822 4.2.HEADER ([RFC-5322] header of the message) 4.2.TEXT ([RFC-5322] text body of the message) MULTIPART/MIXED 4.2.1 TEXT/PLAIN 4.2.2 MULTIPART/ALTERNATIVE 4.2.2.1 TEXT/PLAIN 4.2.2.2 TEXT/RICHTEXT It is possible to fetch a substring of the designated text. This is done by appending an open angle bracket ("<"), the octet position of the first desired octet, a period, the maximum number of octets desired, and a close angle bracket (">") to the part specifier. If the starting octet is beyond the end of the text, an empty string is returned. Any partial fetch that attempts to read beyond the end of the text is truncated as appropriate. A partial fetch that starts at octet 0 is returned as a partial fetch, even if this truncation happened. Note: This means that BODY[]<0.2048> of a 1500-octet message will return BODY[]<0> with a literal of size 1500, not BODY[]. Note: A substring fetch of a HEADER.FIELDS or HEADER.FIELDS.NOT part specifier is calculated after subsetting the header. The \Seen flag is implicitly set; if this causes the flags to change, they SHOULD be included as part of the FETCH responses. BODY.PEEK[
]<> An alternate form of BODY[
] that does not implicitly set the \Seen flag. Melnikov Expires October 28, 2015 [Page 58] Internet-Draft IMAP4rev2 April 2015 BODYSTRUCTURE The [MIME-IMB] body structure of the message. This is computed by the server by parsing the [MIME-IMB] header fields in the [RFC-5322] header and [MIME-IMB] headers. ENVELOPE The envelope structure of the message. This is computed by the server by parsing the [RFC-5322] header into the component parts, defaulting various fields as necessary. FLAGS The flags that are set for this message. INTERNALDATE The internal date of the message. RFC822 Functionally equivalent to BODY[], differing in the syntax of the resulting untagged FETCH data (RFC822 is returned). RFC822.HEADER Functionally equivalent to BODY.PEEK[HEADER], differing in the syntax of the resulting untagged FETCH data (RFC822.HEADER is returned). RFC822.SIZE The [RFC-5322] size of the message. RFC822.TEXT Functionally equivalent to BODY[TEXT], differing in the syntax of the resulting untagged FETCH data (RFC822.TEXT is returned). UID The unique identifier for the message. Example: C: A654 FETCH 2:4 (FLAGS BODY[HEADER.FIELDS (DATE FROM)]) S: * 2 FETCH .... S: * 3 FETCH .... S: * 4 FETCH .... S: A654 OK FETCH completed 6.4.7. STORE Command Arguments: sequence set message data item name value for message data item Responses: untagged responses: FETCH Result: OK - store completed NO - store error: can't store that data BAD - command unknown or arguments invalid The STORE command alters data associated with a message in the mailbox. Normally, STORE will return the updated value of the data with an untagged FETCH response. A suffix of ".SILENT" in the data Melnikov Expires October 28, 2015 [Page 59] Internet-Draft IMAP4rev2 April 2015 item name prevents the untagged FETCH, and the server SHOULD assume that the client has determined the updated value itself or does not care about the updated value. Note: Regardless of whether or not the ".SILENT" suffix was used, the server SHOULD send an untagged FETCH response if a change to a message's flags from an external source is observed. The intent is that the status of the flags is determinate without a race condition. The currently defined data items that can be stored are: FLAGS Replace the flags for the message (other than \Recent) with the argument. The new value of the flags is returned as if a FETCH of those flags was done. FLAGS.SILENT Equivalent to FLAGS, but without returning a new value. +FLAGS Add the argument to the flags for the message. The new value of the flags is returned as if a FETCH of those flags was done. +FLAGS.SILENT Equivalent to +FLAGS, but without returning a new value. -FLAGS Remove the argument from the flags for the message. The new value of the flags is returned as if a FETCH of those flags was done. -FLAGS.SILENT Equivalent to -FLAGS, but without returning a new value. Example: C: A003 STORE 2:4 +FLAGS (\Deleted) S: * 2 FETCH (FLAGS (\Deleted \Seen)) S: * 3 FETCH (FLAGS (\Deleted)) S: * 4 FETCH (FLAGS (\Deleted \Flagged \Seen)) S: A003 OK STORE completed 6.4.8. COPY Command Arguments: sequence set mailbox name Responses: no specific responses for this command Result: OK - copy completed NO - copy error: can't copy those messages or to that Melnikov Expires October 28, 2015 [Page 60] Internet-Draft IMAP4rev2 April 2015 name BAD - command unknown or arguments invalid The COPY command copies the specified message(s) to the end of the specified destination mailbox. The flags and internal date of the message(s) SHOULD be preserved, and the Recent flag SHOULD be set, in the copy. If the destination mailbox does not exist, a server SHOULD return an error. It SHOULD NOT automatically create the mailbox. Unless it is certain that the destination mailbox can not be created, the server MUST send the response code "[TRYCREATE]" as the prefix of the text of the tagged NO response. This gives a hint to the client that it can attempt a CREATE command and retry the COPY if the CREATE is successful. If the COPY command is unsuccessful for any reason, server implementations MUST restore the destination mailbox to its state before the COPY attempt. On successful completion of a COPY, the server SHOULD return a COPYUID response code. In the case of a mailbox that has permissions set so that the client can COPY to the mailbox, but not SELECT or EXAMINE it, the server SHOULD NOT send an COPYUID response code as it would disclose information about the mailbox. In the case of a mailbox that has UIDNOTSTICKY status (see the UIDNOTSTICKY response code), the server MAY omit the COPYUID response code as it is not meaningful. If the server does not return the COPYUID response code, the client can discover this information by selecting the destination mailbox. The location of messages placed in the destination mailbox by COPY can be determined by using FETCH and/or SEARCH commands (e.g., for Message-ID). Example: C: A003 COPY 2:4 MEETING S: A003 OK COPY completed 6.4.9. UID Command Arguments: command name command arguments Responses: untagged responses: FETCH, SEARCH Melnikov Expires October 28, 2015 [Page 61] Internet-Draft IMAP4rev2 April 2015 Result: OK - UID command completed NO - UID command error BAD - command unknown or arguments invalid The UID command has three forms. In the first form, it takes as its arguments a COPY, FETCH, or STORE command with arguments appropriate for the associated command. However, the numbers in the sequence set argument are unique identifiers instead of message sequence numbers. Sequence set ranges are permitted, but there is no guarantee that unique identifiers will be contiguous. A non-existent unique identifier is ignored without any error message generated. Thus, it is possible for a UID FETCH command to return an OK without any data or a UID COPY or UID STORE to return an OK without performing any operations. In the second form, the UID command takes an EXPUNGE command with an extra parameter the specified a sequence set of UIDs to operate on. The UID EXPUNGE command permanently removes all messages that both have the \Deleted flag set and have a UID that is included in the specified sequence set from the currently selected mailbox. If a message either does not have the \Deleted flag set or has a UID that is not included in the specified sequence set, it is not affected. UID EXPUNGE is particularly useful for disconnected use clients. By using UID EXPUNGE instead of EXPUNGE when resynchronizing with the server, the client can ensure that it does not inadvertantly remove any messages that have been marked as \Deleted by other clients between the time that the client was last connected and the time the client resynchronizes. Example: C: A003 UID EXPUNGE 3000:3002 S: * 3 EXPUNGE S: * 3 EXPUNGE S: * 3 EXPUNGE S: A003 OK UID EXPUNGE completed In the third form, the UID command takes a SEARCH command with SEARCH command arguments. The interpretation of the arguments is the same as with SEARCH; however, the numbers returned in a ESEARCH response for a UID SEARCH command are unique identifiers instead of message sequence numbers. Also, the corresponding ESEARCH response MUST include the UID indicator. For example, the command UID SEARCH 1:100 UID 443:557 returns the unique identifiers corresponding to the intersection of two sequence sets, the message sequence number range 1:100 and the UID range 443:557. Melnikov Expires October 28, 2015 [Page 62] Internet-Draft IMAP4rev2 April 2015 Note: in the above example, the UID range 443:557 appears. The same comment about a non-existent unique identifier being ignored without any error message also applies here. Hence, even if neither UID 443 or 557 exist, this range is valid and would include an existing UID 495. Also note that a UID range of 559:* always includes the UID of the last message in the mailbox, even if 559 is higher than any assigned UID value. This is because the contents of a range are independent of the order of the range endpoints. Thus, any UID range with * as one of the endpoints indicates at least one message (the message with the highest numbered UID), unless the mailbox is empty. The number after the "*" in an untagged FETCH or EXPUNGE response is always a message sequence number, not a unique identifier, even for a UID command response. However, server implementations MUST implicitly include the UID message data item as part of any FETCH response caused by a UID command, regardless of whether a UID was specified as a message data item to the FETCH. Note: The rule about including the UID message data item as part of a FETCH response primarily applies to the UID FETCH and UID STORE commands, including a UID FETCH command that does not include UID as a message data item. Although it is unlikely that the other UID commands will cause an untagged FETCH, this rule applies to these commands as well. Example: C: A999 UID FETCH 4827313:4828442 FLAGS S: * 23 FETCH (FLAGS (\Seen) UID 4827313) S: * 24 FETCH (FLAGS (\Seen) UID 4827943) S: * 25 FETCH (FLAGS (\Seen) UID 4828442) S: A999 OK UID FETCH completed 6.5. Client Commands - Experimental/Expansion 6.5.1. X Command Arguments: implementation defined Responses: implementation defined Result: OK - command completed NO - failure BAD - command unknown or arguments invalid Any command prefixed with an X is an experimental command. Commands which are not part of this specification, a standard or standards- Melnikov Expires October 28, 2015 [Page 63] Internet-Draft IMAP4rev2 April 2015 track revision of this specification, or an IESG-approved experimental protocol, MUST use the X prefix. Any added untagged responses issued by an experimental command MUST also be prefixed with an X. Server implementations MUST NOT send any such untagged responses, unless the client requested it by issuing the associated experimental command. Example: C: a441 CAPABILITY S: * CAPABILITY IMAP4rev2 XPIG-LATIN S: a441 OK CAPABILITY completed C: A442 XPIG-LATIN S: * XPIG-LATIN ow-nay eaking-spay ig-pay atin-lay S: A442 OK XPIG-LATIN ompleted-cay 7. Server Responses Server responses are in three forms: status responses, server data, and command continuation request. The information contained in a server response, identified by "Contents:" in the response descriptions below, is described by function, not by syntax. The precise syntax of server responses is described in the Formal Syntax section. The client MUST be prepared to accept any response at all times. Status responses can be tagged or untagged. Tagged status responses indicate the completion result (OK, NO, or BAD status) of a client command, and have a tag matching the command. Some status responses, and all server data, are untagged. An untagged response is indicated by the token "*" instead of a tag. Untagged status responses indicate server greeting, or server status that does not indicate the completion of a command (for example, an impending system shutdown alert). For historical reasons, untagged server data responses are also called "unsolicited data", although strictly speaking, only unilateral server data is truly "unsolicited". Certain server data MUST be recorded by the client when it is received; this is noted in the description of that data. Such data conveys critical information which affects the interpretation of all subsequent commands and responses (e.g., updates reflecting the creation or destruction of messages). Other server data SHOULD be recorded for later reference; if the client does not need to record the data, or if recording the data has Melnikov Expires October 28, 2015 [Page 64] Internet-Draft IMAP4rev2 April 2015 no obvious purpose (e.g., a SEARCH response when no SEARCH command is in progress), the data SHOULD be ignored. An example of unilateral untagged server data occurs when the IMAP connection is in the selected state. In the selected state, the server checks the mailbox for new messages as part of command execution. Normally, this is part of the execution of every command; hence, a NOOP command suffices to check for new messages. If new messages are found, the server sends untagged EXISTS and RECENT responses reflecting the new size of the mailbox. Server implementations that offer multiple simultaneous access to the same mailbox SHOULD also send appropriate unilateral untagged FETCH and EXPUNGE responses if another agent changes the state of any message flags or expunges any messages. Command continuation request responses use the token "+" instead of a tag. These responses are sent by the server to indicate acceptance of an incomplete client command and readiness for the remainder of the command. 7.1. Server Responses - Status Responses Status responses are OK, NO, BAD, PREAUTH and BYE. OK, NO, and BAD can be tagged or untagged. PREAUTH and BYE are always untagged. Status responses MAY include an OPTIONAL "response code". A response code consists of data inside square brackets in the form of an atom, possibly followed by a space and arguments. The response code contains additional information or status codes for client software beyond the OK/NO/BAD condition, and are defined when there is a specific action that a client can take based upon the additional information. The currently defined response codes are: ALERT The human-readable text contains a special alert that MUST be presented to the user in a fashion that calls the user's attention to the message. ALREADYEXISTS The operation attempts to create something that already exists, such as when the CREATE or RENAME directories attempt to create a mailbox and there is already one of that name. C: o RENAME this that S: o NO [ALREADYEXISTS] Mailbox "that" already exists Melnikov Expires October 28, 2015 [Page 65] Internet-Draft IMAP4rev2 April 2015 APPENDUID Followed by the UIDVALIDITY of the destination mailbox and the UID assigned to the appended message in the destination mailbox, indicates that the message has been appended to the destination mailbox with that UID. If the server also supports the [MULTIAPPEND] extension, and if multiple messages were appended in the APPEND command, then the second value is a UID set containing the UIDs assigned to the appended messages, in the order they were transmitted in the APPEND command. This UID set may not contain extraneous UIDs or the symbol "*". Note: the UID set form of the APPENDUID response code MUST NOT be used if only a single message was appended. In particular, a server MUST NOT send a range such as 123:123. This is because a client that does not support [MULTIAPPEND] expects only a single UID and not a UID set. UIDs are assigned in strictly ascending order in the mailbox (refer to Section 2.3.1.1); note that a range of 12:10 is exactly equivalent to 10:12 and refers to the sequence 10,11,12. This response code is returned in a tagged OK response to the APPEND command. AUTHENTICATIONFAILED Authentication failed for some reason on which the server is unwilling to elaborate. Typically, this includes "unknown user" and "bad password". This is the same as not sending any response code, except that when a client sees AUTHENTICATIONFAILED, it knows that the problem wasn't, e.g., UNAVAILABLE, so there's no point in trying the same login/password again later. C: b LOGIN "fred" "foo" S: b NO [AUTHENTICATIONFAILED] Authentication failed AUTHORIZATIONFAILED Authentication succeeded in using the authentication identity, but the server cannot or will not allow the authentication identity to act as the requested authorization Melnikov Expires October 28, 2015 [Page 66] Internet-Draft IMAP4rev2 April 2015 identity. This is only applicable when the authentication and authorization identities are different. C: c1 AUTHENTICATE PLAIN [...] S: c1 NO [AUTHORIZATIONFAILED] No such authorization-ID C: c2 AUTHENTICATE PLAIN [...] S: c2 NO [AUTHORIZATIONFAILED] Authenticator is not an admin BADCHARSET Optionally followed by a parenthesized list of charsets. A SEARCH failed because the given charset is not supported by this implementation. If the optional list of charsets is given, this lists the charsets that are supported by this implementation. CANNOT The operation violates some invariant of the server and can never succeed. C: l create "///////" S: l NO [CANNOT] Adjacent slashes are not supported CAPABILITY Followed by a list of capabilities. This can appear in the initial OK or PREAUTH response to transmit an initial capabilities list. This makes it unnecessary for a client to send a separate CAPABILITY command if it recognizes this response. CLIENTBUG The server has detected a client bug. This can accompany all of OK, NO, and BAD, depending on what the client bug is. C: k1 select "/archive/projects/experiment-iv" [...] S: k1 OK [READ-ONLY] Done C: k2 status "/archive/projects/experiment-iv" (messages) [...] S: k2 OK [CLIENTBUG] Done CONTACTADMIN The user should contact the system administrator or support desk. C: e login "fred" "foo" S: e OK [CONTACTADMIN] COPYUID Melnikov Expires October 28, 2015 [Page 67] Internet-Draft IMAP4rev2 April 2015 Followed by the UIDVALIDITY of the destination mailbox, a UID set containing the UIDs of the message(s) in the source mailbox that were copied to the destination mailbox and containing the UIDs assigned to the copied message(s) in the destination mailbox, indicates that the message(s) have been copied to the destination mailbox with the stated UID(s). The source UID set is in the order the message(s) were copied; the destination UID set corresponds to the source UID set and is in the same order. Neither of the UID sets may contain extraneous UIDs or the symbol "*". UIDs are assigned in strictly ascending order in the mailbox (refer to Section 2.3.1.1); note that a range of 12:10 is exactly equivalent to 10:12 and refers to the sequence 10,11,12. This response code is returned in a tagged OK response to the COPY command. CORRUPTION The server discovered that some relevant data (e.g., the mailbox) are corrupt. This response code does not include any information about what's corrupt, but the server can write that to its logfiles. C: i select "/archive/projects/experiment-iv" S: i NO [CORRUPTION] Cannot open mailbox EXPIRED Either authentication succeeded or the server no longer had the necessary data; either way, access is no longer permitted using that passphrase. The client or user should get a new passphrase. C: d login "fred" "foo" S: d NO [EXPIRED] That password isn't valid any more EXPUNGEISSUED Someone else has issued an EXPUNGE for the same mailbox. The client may want to issue NOOP soon. [IMAP-MULTIACCESS] discusses this subject in depth. C: h search from fred@example.com S: * SEARCH 1 2 3 5 8 13 21 42 Melnikov Expires October 28, 2015 [Page 68] Internet-Draft IMAP4rev2 April 2015 S: h OK [EXPUNGEISSUED] Search completed INUSE An operation has not been carried out because it involves sawing off a branch someone else is sitting on. Someone else may be holding an exclusive lock needed for this operation, or the operation may involve deleting a resource someone else is using, typically a mailbox. The operation may succeed if the client tries again later. C: g delete "/archive/projects/experiment-iv" S: g NO [INUSE] Mailbox in use LIMIT The operation ran up against an implementation limit of some kind, such as the number of flags on a single message or the number of flags used in a mailbox. C: m STORE 42 FLAGS f1 f2 f3 f4 f5 ... f250 S: m NO [LIMIT] At most 32 flags in one mailbox supported NONEXISTENT The operation attempts to delete something that does not exist. Similar to ALREADYEXISTS. C: p RENAME this that S: p NO [NONEXISTENT] No such mailbox NOPERM The access control system (e.g., Access Control List (ACL), see [RFC4314] does not permit this user to carry out an operation, such as selecting or creating a mailbox. C: f select "/archive/projects/experiment-iv" S: f NO [NOPERM] Access denied OVERQUOTA The user would be over quota after the operation. (The user may or may not be over quota already.) Melnikov Expires October 28, 2015 [Page 69] Internet-Draft IMAP4rev2 April 2015 Note that if the server sends OVERQUOTA but doesn't support the IMAP QUOTA extension defined by [RFC2087], then there is a quota, but the client cannot find out what the quota is. C: n1 uid copy 1:* oldmail S: n1 NO [OVERQUOTA] Sorry C: n2 uid copy 1:* oldmail S: n2 OK [OVERQUOTA] You are now over your soft quota PARSE The human-readable text represents an error in parsing the [RFC-5322] header or [MIME-IMB] headers of a message in the mailbox. PERMANENTFLAGS Followed by a parenthesized list of flags, indicates which of the known flags the client can change permanently. Any flags that are in the FLAGS untagged response, but not the PERMANENTFLAGS list, can not be set permanently. If the client attempts to STORE a flag that is not in the PERMANENTFLAGS list, the server will either ignore the change or store the state change for the remainder of the current session only. The PERMANENTFLAGS list can also include the special flag \*, which indicates that it is possible to create new keywords by attempting to store those flags in the mailbox. PRIVACYREQUIRED The operation is not permitted due to a lack of privacy. If Transport Layer Security (TLS) is not in use, the client could try STARTTLS (see Section 6.2.1 of [RFC3501]) and then repeat the operation. C: d login "fred" "foo" S: d NO [PRIVACYREQUIRED] Connection offers no privacy C: d select inbox S: d NO [PRIVACYREQUIRED] Connection offers no privacy READ-ONLY The mailbox is selected read-only, or its access while selected has changed from read-write to read-only. READ-WRITE The mailbox is selected read-write, or its access while selected has changed from read-only to read-write. SERVERBUG Melnikov Expires October 28, 2015 [Page 70] Internet-Draft IMAP4rev2 April 2015 The server encountered a bug in itself or violated one of its own invariants. C: j select "/archive/projects/experiment-iv" S: j NO [SERVERBUG] This should not happen TRYCREATE An APPEND or COPY attempt is failing because the target mailbox does not exist (as opposed to some other reason). This is a hint to the client that the operation can succeed if the mailbox is first created by the CREATE command. UIDNEXT Followed by a decimal number, indicates the next unique identifier value. Refer to Section 2.3.1.1 for more information. UIDNOTSTICKY The selected mailbox is supported by a mail store that does not support persistent UIDs; that is, UIDVALIDITY will be different each time the mailbox is selected. Consequently, APPEND or COPY to this mailbox will not return an APPENDUID or COPYUID response code. This response code is returned in an untagged NO response to the SELECT command. Note: servers SHOULD NOT have any UIDNOTSTICKY mail stores. This facility exists to support legacy mail stores in which it is technically infeasible to support persistent UIDs. This should be avoided when designing new mail stores. UIDVALIDITY Followed by a decimal number, indicates the unique identifier validity value. Refer to Section 2.3.1.1 for more information. UNAVAILABLE Temporary failure because a subsystem is down. For example, an IMAP server that uses a Lightweight Directory Access Protocol (LDAP) or Radius server for authentication might use this response code when the LDAP/Radius server is down. C: a LOGIN "fred" "foo" S: a NO [UNAVAILABLE] User's backend down for maintenance UNSEEN Followed by a decimal number, indicates the number of the first message without the \Seen flag set. Melnikov Expires October 28, 2015 [Page 71] Internet-Draft IMAP4rev2 April 2015 Additional response codes defined by particular client or server implementations SHOULD be prefixed with an "X" until they are added to a revision of this protocol. Client implementations SHOULD ignore response codes that they do not recognize. 7.1.1. OK Response Contents: OPTIONAL response code human-readable text The OK response indicates an information message from the server. When tagged, it indicates successful completion of the associated command. The human-readable text MAY be presented to the user as an information message. The untagged form indicates an information-only message; the nature of the information MAY be indicated by a response code. The untagged form is also used as one of three possible greetings at connection startup. It indicates that the connection is not yet authenticated and that a LOGIN command is needed. Example: S: * OK IMAP4rev2 server ready C: A001 LOGIN fred blurdybloop S: * OK [ALERT] System shutdown in 10 minutes S: A001 OK LOGIN Completed 7.1.2. NO Response Contents: OPTIONAL response code human-readable text The NO response indicates an operational error message from the server. When tagged, it indicates unsuccessful completion of the associated command. The untagged form indicates a warning; the command can still complete successfully. The human-readable text describes the condition. Example: C: A222 COPY 1:2 owatagusiam S: * NO Disk is 98% full, please delete unnecessary data S: A222 OK COPY completed C: A223 COPY 3:200 blurdybloop S: * NO Disk is 98% full, please delete unnecessary data S: * NO Disk is 99% full, please delete unnecessary data S: A223 NO COPY failed: disk is full Melnikov Expires October 28, 2015 [Page 72] Internet-Draft IMAP4rev2 April 2015 7.1.3. BAD Response Contents: OPTIONAL response code human-readable text The BAD response indicates an error message from the server. When tagged, it reports a protocol-level error in the client's command; the tag indicates the command that caused the error. The untagged form indicates a protocol-level error for which the associated command can not be determined; it can also indicate an internal server failure. The human-readable text describes the condition. Example: C: ...very long command line... S: * BAD Command line too long C: ...empty line... S: * BAD Empty command line C: A443 EXPUNGE S: * BAD Disk crash, attempting salvage to a new disk! S: * OK Salvage successful, no data lost S: A443 OK Expunge completed 7.1.4. PREAUTH Response Contents: OPTIONAL response code human-readable text The PREAUTH response is always untagged, and is one of three possible greetings at connection startup. It indicates that the connection has already been authenticated by external means; thus no LOGIN command is needed. Example: S: * PREAUTH IMAP4rev2 server logged in as Smith 7.1.5. BYE Response Contents: OPTIONAL response code human-readable text The BYE response is always untagged, and indicates that the server is about to close the connection. The human-readable text MAY be displayed to the user in a status report by the client. The BYE response is sent under one of four conditions: 1. as part of a normal logout sequence. The server will close the connection after sending the tagged OK response to the LOGOUT command. Melnikov Expires October 28, 2015 [Page 73] Internet-Draft IMAP4rev2 April 2015 2. as a panic shutdown announcement. The server closes the connection immediately. 3. as an announcement of an inactivity autologout. The server closes the connection immediately. 4. as one of three possible greetings at connection startup, indicating that the server is not willing to accept a connection from this client. The server closes the connection immediately. The difference between a BYE that occurs as part of a normal LOGOUT sequence (the first case) and a BYE that occurs because of a failure (the other three cases) is that the connection closes immediately in the failure case. In all cases the client SHOULD continue to read response data from the server until the connection is closed; this will ensure that any pending untagged or completion responses are read and processed. Example: S: * BYE Autologout; idle for too long 7.2. Server Responses - Server and Mailbox Status These responses are always untagged. This is how server and mailbox status data are transmitted from the server to the client. Many of these responses typically result from a command with the same name. 7.2.1. The ENABLED Response Contents: capability listing The ENABLED response occurs as a result of an ENABLE command. The capability listing contains a space-separated listing of capability names that the server supports and that were successfully enabled. The ENABLED response may contain no capabilities, which means that no extensions listed by the client were successfully enabled. 7.2.2. CAPABILITY Response Contents: capability listing The CAPABILITY response occurs as a result of a CAPABILITY command. The capability listing contains a space-separated listing of capability names that the server supports. The capability listing MUST include the atom "IMAP4rev2". In addition, client and server implementations MUST implement the STARTTLS, LOGINDISABLED, and AUTH=PLAIN (described in [PLAIN]) Melnikov Expires October 28, 2015 [Page 74] Internet-Draft IMAP4rev2 April 2015 capabilities. See the Security Considerations section for important information. A capability name which begins with "AUTH=" indicates that the server supports that particular authentication mechanism. The LOGINDISABLED capability indicates that the LOGIN command is disabled, and that the server will respond with a tagged NO response to any attempt to use the LOGIN command even if the user name and password are valid. An IMAP client MUST NOT issue the LOGIN command if the server advertises the LOGINDISABLED capability. Other capability names indicate that the server supports an extension, revision, or amendment to the IMAP4rev2 protocol. Server responses MUST conform to this document until the client issues a command that uses the associated capability. Capability names MUST either begin with "X" or be standard or standards-track IMAP4rev2 extensions, revisions, or amendments registered with IANA. A server MUST NOT offer unregistered or non- standard capability names, unless such names are prefixed with an "X". Client implementations SHOULD NOT require any capability name other than "IMAP4rev2", and MUST ignore any unknown capability names. A server MAY send capabilities automatically, by using the CAPABILITY response code in the initial PREAUTH or OK responses, and by sending an updated CAPABILITY response code in the tagged OK response as part of a successful authentication. It is unnecessary for a client to send a separate CAPABILITY command if it recognizes these automatic capabilities. Example: S: * CAPABILITY IMAP4rev2 STARTTLS AUTH=GSSAPI XPIG-LATIN 7.2.3. LIST Response Contents: name attributes hierarchy delimiter name The LIST response occurs as a result of a LIST command. It returns a single name that matches the LIST specification. There can be multiple LIST responses for a single LIST command. Four name attributes are defined: Melnikov Expires October 28, 2015 [Page 75] Internet-Draft IMAP4rev2 April 2015 \Noinferiors It is not possible for any child levels of hierarchy to exist under this name; no child levels exist now and none can be created in the future. \Noselect It is not possible to use this name as a selectable mailbox. \Marked The mailbox has been marked "interesting" by the server; the mailbox probably contains messages that have been added since the last time the mailbox was selected. \Unmarked The mailbox does not contain any additional messages since the last time the mailbox was selected. If it is not feasible for the server to determine whether or not the mailbox is "interesting", the server SHOULD NOT send either \Marked or \Unmarked. The server MUST NOT send more than one of \Marked, \Unmarked, and \Noselect for a single mailbox, and MAY send none of these. The hierarchy delimiter is a character used to delimit levels of hierarchy in a mailbox name. A client can use it to create child mailboxes, and to search higher or lower levels of naming hierarchy. All children of a top-level hierarchy node MUST use the same separator character. A NIL hierarchy delimiter means that no hierarchy exists; the name is a "flat" name. The name represents an unambiguous left-to-right hierarchy, and MUST be valid for use as a reference in LIST and LSUB commands. Unless \Noselect is indicated, the name MUST also be valid as an argument for commands, such as SELECT, that accept mailbox names. Example: S: * LIST (\Noselect) "/" ~/Mail/foo 7.2.4. LSUB Response Contents: name attributes hierarchy delimiter name The LSUB response occurs as a result of an LSUB command. It returns a single name that matches the LSUB specification. There can be multiple LSUB responses for a single LSUB command. The data is identical in format to the LIST response. Example: S: * LSUB () "." #news.comp.mail.misc Melnikov Expires October 28, 2015 [Page 76] Internet-Draft IMAP4rev2 April 2015 7.2.5. STATUS Response Contents: name status parenthesized list The STATUS response occurs as a result of an STATUS command. It returns the mailbox name that matches the STATUS specification and the requested mailbox status information. Example: S: * STATUS blurdybloop (MESSAGES 231 UIDNEXT 44292) 7.2.6. ESEARCH Response Contents: one or more search-return-data pairs The ESEARCH response occurs as a result of a SEARCH or UID SEARCH command. The ESEARCH response starts with an optional search correlator. If it is missing, then the response was not caused by a particular IMAP command, whereas if it is present, it contains the tag of the command that caused the response to be returned. The search correlator is followed by an optional UID indicator. If this indicator is present, all data in the ESEARCH response refers to UIDs, otherwise all returned data refers to message numbers. The rest of the ESEARCH response contains one or more search data pairs. Each pair starts with unique return item name, followed by a space and the corresponding data. Search data pairs may be returned in any order. Unless specified otherwise by an extension, any return item name SHOULD appear only once in an ESEARCH response. [[TBD: describe the most common search data pairs returned.]] Example: S: * ESEARCH UID COUNT 5 ALL 4:19,21,28 Example: S: * ESEARCH (TAG "a567") UID COUNT 5 ALL 4:19,21,28 Example: S: * ESEARCH COUNT 5 ALL 1:17,21 7.2.7. FLAGS Response Contents: flag parenthesized list The FLAGS response occurs as a result of a SELECT or EXAMINE command. The flag parenthesized list identifies the flags (at a minimum, the system-defined flags) that are applicable for this mailbox. Flags Melnikov Expires October 28, 2015 [Page 77] Internet-Draft IMAP4rev2 April 2015 other than the system flags can also exist, depending on server implementation. The update from the FLAGS response MUST be recorded by the client. Example: S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) 7.3. Server Responses - Mailbox Size These responses are always untagged. This is how changes in the size of the mailbox are transmitted from the server to the client. Immediately following the "*" token is a number that represents a message count. 7.3.1. EXISTS Response Contents: none The EXISTS response reports the number of messages in the mailbox. This response occurs as a result of a SELECT or EXAMINE command, and if the size of the mailbox changes (e.g., new messages). The update from the EXISTS response MUST be recorded by the client. Example: S: * 23 EXISTS 7.3.2. RECENT Response Contents: none The RECENT response reports the number of messages with the \Recent flag set. This response occurs as a result of a SELECT or EXAMINE command, and if the size of the mailbox changes (e.g., new messages). Note: It is not guaranteed that the message sequence numbers of recent messages will be a contiguous range of the highest n messages in the mailbox (where n is the value reported by the RECENT response). Examples of situations in which this is not the case are: multiple clients having the same mailbox open (the first session to be notified will see it as recent, others will probably see it as non-recent), and when the mailbox is re-ordered by a non-IMAP agent. The only reliable way to identify recent messages is to look at message flags to see which have the \Recent flag set, or to do a SEARCH RECENT. The update from the RECENT response MUST be recorded by the client. Melnikov Expires October 28, 2015 [Page 78] Internet-Draft IMAP4rev2 April 2015 Example: S: * 5 RECENT 7.4. Server Responses - Message Status These responses are always untagged. This is how message data are transmitted from the server to the client, often as a result of a command with the same name. Immediately following the "*" token is a number that represents a message sequence number. 7.4.1. EXPUNGE Response Contents: none The EXPUNGE response reports that the specified message sequence number has been permanently removed from the mailbox. The message sequence number for each successive message in the mailbox is immediately decremented by 1, and this decrement is reflected in message sequence numbers in subsequent responses (including other untagged EXPUNGE responses). The EXPUNGE response also decrements the number of messages in the mailbox; it is not necessary to send an EXISTS response with the new value. As a result of the immediate decrement rule, message sequence numbers that appear in a set of successive EXPUNGE responses depend upon whether the messages are removed starting from lower numbers to higher numbers, or from higher numbers to lower numbers. For example, if the last 5 messages in a 9-message mailbox are expunged, a "lower to higher" server will send five untagged EXPUNGE responses for message sequence number 5, whereas a "higher to lower server" will send successive untagged EXPUNGE responses for message sequence numbers 9, 8, 7, 6, and 5. An EXPUNGE response MUST NOT be sent when no command is in progress, nor while responding to a FETCH, STORE, or SEARCH command. This rule is necessary to prevent a loss of synchronization of message sequence numbers between client and server. A command is not "in progress" until the complete command has been received; in particular, a command is not "in progress" during the negotiation of command continuation. Note: UID FETCH, UID STORE, and UID SEARCH are different commands from FETCH, STORE, and SEARCH. An EXPUNGE response MAY be sent during a UID command. The update from the EXPUNGE response MUST be recorded by the client. Melnikov Expires October 28, 2015 [Page 79] Internet-Draft IMAP4rev2 April 2015 Example: S: * 44 EXPUNGE 7.4.2. FETCH Response Contents: message data The FETCH response returns data about a message to the client. The data are pairs of data item names and their values in parentheses. This response occurs as the result of a FETCH or STORE command, as well as by unilateral server decision (e.g., flag updates). The current data items are: BODY A form of BODYSTRUCTURE without extension data. BODY[
]<> A string expressing the body contents of the specified section. The string SHOULD be interpreted by the client according to the content transfer encoding, body type, and subtype. If the origin octet is specified, this string is a substring of the entire body contents, starting at that origin octet. This means that BODY[]<0> MAY be truncated, but BODY[] is NEVER truncated. Note: The origin octet facility MUST NOT be used by a server in a FETCH response unless the client specifically requested it by means of a FETCH of a BODY[
]<> data item. 8-bit textual data is permitted if a [CHARSET] identifier is part of the body parameter parenthesized list for this section. Note that headers (part specifiers HEADER or MIME, or the header portion of a MESSAGE/RFC822 part), MUST be 7-bit; 8-bit characters are not permitted in headers. Note also that the [RFC-5322] delimiting blank line between the header and the body is not affected by header line subsetting; the blank line is always included as part of header data, except in the case of a message which has no body and no blank line. Non-textual data such as binary data MUST be transfer encoded into a textual form, such as BASE64, prior to being sent to the client. To derive the original binary data, the client MUST decode the transfer encoded string. BODYSTRUCTURE Melnikov Expires October 28, 2015 [Page 80] Internet-Draft IMAP4rev2 April 2015 A parenthesized list that describes the [MIME-IMB] body structure of a message. This is computed by the server by parsing the [MIME-IMB] header fields, defaulting various fields as necessary. For example, a simple text message of 48 lines and 2279 octets can have a body structure of: ("TEXT" "PLAIN" ("CHARSET" "US- ASCII") NIL NIL "7BIT" 2279 48) Multiple parts are indicated by parenthesis nesting. Instead of a body type as the first element of the parenthesized list, there is a sequence of one or more nested body structures. The second element of the parenthesized list is the multipart subtype (mixed, digest, parallel, alternative, etc.). For example, a two part message consisting of a text and a BASE64-encoded text attachment can have a body structure of: (("TEXT" "PLAIN" ("CHARSET" "US-ASCII") NIL NIL "7BIT" 1152 23)("TEXT" "PLAIN" ("CHARSET" "US-ASCII" "NAME" "cc.diff") "<960723163407.20117h@cac.washington.edu>" "Compiler diff" "BASE64" 4554 73) "MIXED") Extension data follows the multipart subtype. Extension data is never returned with the BODY fetch, but can be returned with a BODYSTRUCTURE fetch. Extension data, if present, MUST be in the defined order. The extension data of a multipart body part are in the following order: body parameter parenthesized list A parenthesized list of attribute/value pairs [e.g., ("foo" "bar" "baz" "rag") where "bar" is the value of "foo", and "rag" is the value of "baz"] as defined in [MIME-IMB]. body disposition A parenthesized list, consisting of a disposition type string, followed by a parenthesized list of disposition attribute/value pairs as defined in [DISPOSITION]. body language A string or parenthesized list giving the body language value as defined in [LANGUAGE-TAGS]. body location A string giving the body content URI as defined in [LOCATION]. Any following extension data are not yet defined in this version of the protocol. Such extension data can consist of zero or more NILs, strings, numbers, or potentially nested parenthesized lists of such data. Client implementations that Melnikov Expires October 28, 2015 [Page 81] Internet-Draft IMAP4rev2 April 2015 do a BODYSTRUCTURE fetch MUST be prepared to accept such extension data. Server implementations MUST NOT send such extension data until it has been defined by a revision of this protocol. The basic fields of a non-multipart body part are in the following order: body type A string giving the content media type name as defined in [MIME-IMB]. body subtype A string giving the content subtype name as defined in [MIME-IMB]. body parameter parenthesized list A parenthesized list of attribute/value pairs [e.g., ("foo" "bar" "baz" "rag") where "bar" is the value of "foo" and "rag" is the value of "baz"] as defined in [MIME-IMB]. body id A string giving the content id as defined in [MIME-IMB]. body description A string giving the content description as defined in [MIME-IMB]. body encoding A string giving the content transfer encoding as defined in [MIME-IMB]. body size A number giving the size of the body in octets. Note that this size is the size in its transfer encoding and not the resulting size after any decoding. A body type of type MESSAGE and subtype RFC822 contains, immediately after the basic fields, the envelope structure, body structure, and size in text lines of the encapsulated message. A body type of type TEXT contains, immediately after the basic fields, the size of the body in text lines. Note that this size is the size in its content transfer encoding and not the resulting size after any decoding. Extension data follows the basic fields and the type-specific fields listed above. Extension data is never returned with the BODY fetch, but can be returned with a BODYSTRUCTURE fetch. Extension data, if present, MUST be in the defined order. Melnikov Expires October 28, 2015 [Page 82] Internet-Draft IMAP4rev2 April 2015 The extension data of a non-multipart body part are in the following order: body MD5 A string giving the body MD5 value as defined in [MD5]. body disposition A parenthesized list with the same content and function as the body disposition for a multipart body part. body language A string or parenthesized list giving the body language value as defined in [LANGUAGE-TAGS]. body location A string giving the body content URI as defined in [LOCATION]. Any following extension data are not yet defined in this version of the protocol, and would be as described above under multipart extension data. ENVELOPE A parenthesized list that describes the envelope structure of a message. This is computed by the server by parsing the [RFC-5322] header into the component parts, defaulting various fields as necessary. The fields of the envelope structure are in the following order: date, subject, from, sender, reply-to, to, cc, bcc, in- reply-to, and message-id. The date, subject, in-reply-to, and message-id fields are strings. The from, sender, reply-to, to, cc, and bcc fields are parenthesized lists of address structures. An address structure is a parenthesized list that describes an electronic mail address. The fields of an address structure are in the following order: personal name, [SMTP] at-domain- list (source route), mailbox name, and host name. [RFC-5322] group syntax is indicated by a special form of address structure in which the host name field is NIL. If the mailbox name field is also NIL, this is an end of group marker (semi-colon in RFC 822 syntax). If the mailbox name field is non-NIL, this is a start of group marker, and the mailbox name field holds the group name phrase. If the Date, Subject, In-Reply-To, and Message-ID header lines are absent in the [RFC-5322] header, the corresponding member Melnikov Expires October 28, 2015 [Page 83] Internet-Draft IMAP4rev2 April 2015 of the envelope is NIL; if these header lines are present but empty the corresponding member of the envelope is the empty string. Note: some servers may return a NIL envelope member in the "present but empty" case. Clients SHOULD treat NIL and empty string as identical. Note: [RFC-5322] requires that all messages have a valid Date header. Therefore, the date member in the envelope can not be NIL or the empty string. Note: [RFC-5322] requires that the In-Reply-To and Message- ID headers, if present, have non-empty content. Therefore, the in-reply-to and message-id members in the envelope can not be the empty string. If the From, To, Cc, and Bcc header lines are absent in the [RFC-5322] header, or are present but empty, the corresponding member of the envelope is NIL. If the Sender or Reply-To lines are absent in the [RFC-5322] header, or are present but empty, the server sets the corresponding member of the envelope to be the same value as the from member (the client is not expected to know to do this). Note: [RFC-5322] requires that all messages have a valid From header. Therefore, the from, sender, and reply-to members in the envelope can not be NIL. FLAGS A parenthesized list of flags that are set for this message. INTERNALDATE A string representing the internal date of the message. RFC822 Equivalent to BODY[]. RFC822.HEADER Equivalent to BODY[HEADER]. Note that this did not result in \Seen being set, because RFC822.HEADER response data occurs as a result of a FETCH of RFC822.HEADER. BODY[HEADER] response data occurs as a result of a FETCH of BODY[HEADER] (which sets \Seen) or BODY.PEEK[HEADER] (which does not set \Seen). RFC822.SIZE A number expressing the [RFC-5322] size of the message. RFC822.TEXT Equivalent to BODY[TEXT]. UID A number expressing the unique identifier of the message. Melnikov Expires October 28, 2015 [Page 84] Internet-Draft IMAP4rev2 April 2015 Example: S: * 23 FETCH (FLAGS (\Seen) RFC822.SIZE 44827) 7.5. Server Responses - Command Continuation Request The command continuation request response is indicated by a "+" token instead of a tag. This form of response indicates that the server is ready to accept the continuation of a command from the client. The remainder of this response is a line of text. This response is used in the AUTHENTICATE command to transmit server data to the client, and request additional client data. This response is also used if an argument to any command is a literal. The client is not permitted to send the octets of the literal unless the server indicates that it is expected. This permits the server to process commands and reject errors on a line-by-line basis. The remainder of the command, including the CRLF that terminates a command, follows the octets of the literal. If there are any additional command arguments, the literal octets are followed by a space and those arguments. Example: C: A001 LOGIN {11} S: + Ready for additional command text C: FRED FOOBAR {7} S: + Ready for additional command text C: fat man S: A001 OK LOGIN completed C: A044 BLURDYBLOOP {102856} S: A044 BAD No such command as "BLURDYBLOOP" 8. Sample IMAP4rev2 connection The following is a transcript of an IMAP4rev2 connection. A long line in this sample is broken for editorial clarity. Melnikov Expires October 28, 2015 [Page 85] Internet-Draft IMAP4rev2 April 2015 S: * OK IMAP4rev2 Service Ready C: a001 login mrc secret S: a001 OK LOGIN completed C: a002 select inbox S: * 18 EXISTS S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) S: * 2 RECENT S: * OK [UNSEEN 17] Message 17 is the first unseen message S: * OK [UIDVALIDITY 3857529045] UIDs valid S: a002 OK [READ-WRITE] SELECT completed C: a003 fetch 12 full S: * 12 FETCH (FLAGS (\Seen) INTERNALDATE "17-Jul-1996 02:44:25 -0700" RFC822.SIZE 4286 ENVELOPE ("Wed, 17 Jul 1996 02:23:25 -0700 (PDT)" "IMAP4rev2 WG mtg summary and minutes" (("Terry Gray" NIL "gray" "cac.washington.edu")) (("Terry Gray" NIL "gray" "cac.washington.edu")) (("Terry Gray" NIL "gray" "cac.washington.edu")) ((NIL NIL "imap" "cac.washington.edu")) ((NIL NIL "minutes" "CNRI.Reston.VA.US") ("John Klensin" NIL "KLENSIN" "MIT.EDU")) NIL NIL "") BODY ("TEXT" "PLAIN" ("CHARSET" "US-ASCII") NIL NIL "7BIT" 3028 92)) S: a003 OK FETCH completed C: a004 fetch 12 body[header] S: * 12 FETCH (BODY[HEADER] {342} S: Date: Wed, 17 Jul 1996 02:23:25 -0700 (PDT) S: From: Terry Gray S: Subject: IMAP4rev2 WG mtg summary and minutes S: To: imap@cac.washington.edu S: cc: minutes@CNRI.Reston.VA.US, John Klensin S: Message-Id: S: MIME-Version: 1.0 S: Content-Type: TEXT/PLAIN; CHARSET=US-ASCII S: S: ) S: a004 OK FETCH completed C: a005 store 12 +flags \deleted S: * 12 FETCH (FLAGS (\Seen \Deleted)) S: a005 OK +FLAGS completed C: a006 logout S: * BYE IMAP4rev2 server terminating connection S: a006 OK LOGOUT completed Melnikov Expires October 28, 2015 [Page 86] Internet-Draft IMAP4rev2 April 2015 9. Formal Syntax The following syntax specification uses the Augmented Backus-Naur Form (ABNF) notation as specified in [ABNF]. In the case of alternative or optional rules in which a later rule overlaps an earlier rule, the rule which is listed earlier MUST take priority. For example, "\Seen" when parsed as a flag is the \Seen flag name and not a flag-extension, even though "\Seen" can be parsed as a flag-extension. Some, but not all, instances of this rule are noted below. Note: [ABNF] rules MUST be followed strictly; in particular: (1) Except as noted otherwise, all alphabetic characters are case- insensitive. The use of upper or lower case characters to define token strings is for editorial clarity only. Implementations MUST accept these strings in a case-insensitive fashion. (2) In all cases, SP refers to exactly one space. It is NOT permitted to substitute TAB, insert additional spaces, or otherwise treat SP as being equivalent to LWSP. (3) The ASCII NUL character, %x00, MUST NOT be used at any time. address = "(" addr-name SP addr-adl SP addr-mailbox SP addr-host ")" addr-adl = nstring ; Holds route from [RFC-5322] route-addr if ; non-NIL addr-host = nstring ; NIL indicates [RFC-5322] group syntax. ; Otherwise, holds [RFC-5322] domain name addr-mailbox = nstring ; NIL indicates end of [RFC-5322] group; if ; non-NIL and addr-host is NIL, holds ; [RFC-5322] group name. ; Otherwise, holds [RFC-5322] local-part ; after removing [RFC-5322] quoting addr-name = nstring ; If non-NIL, holds phrase from [RFC-5322] ; mailbox after removing [RFC-5322] quoting append = "APPEND" SP mailbox [SP flag-list] [SP date-time] SP Melnikov Expires October 28, 2015 [Page 87] Internet-Draft IMAP4rev2 April 2015 literal append-uid = uniqueid astring = 1*ASTRING-CHAR / string ASTRING-CHAR = ATOM-CHAR / resp-specials atom = 1*ATOM-CHAR ATOM-CHAR = atom-specials = "(" / ")" / "{" / SP / CTL / list-wildcards / quoted-specials / resp-specials authenticate = "AUTHENTICATE" SP auth-type *(CRLF base64) auth-type = atom ; Defined by [SASL] base64 = *(4base64-char) [base64-terminal] base64-char = ALPHA / DIGIT / "+" / "/" ; Case-sensitive base64-terminal = (2base64-char "==") / (3base64-char "=") body = "(" (body-type-1part / body-type-mpart) ")" body-extension = nstring / number / "(" body-extension *(SP body-extension) ")" ; Future expansion. Client implementations ; MUST accept body-extension fields. Server ; implementations MUST NOT generate ; body-extension fields except as defined by ; future standard or standards-track ; revisions of this specification. body-ext-1part = body-fld-md5 [SP body-fld-dsp [SP body-fld-lang [SP body-fld-loc *(SP body-extension)]]] ; MUST NOT be returned on non-extensible ; "BODY" fetch body-ext-mpart = body-fld-param [SP body-fld-dsp [SP body-fld-lang [SP body-fld-loc *(SP body-extension)]]] ; MUST NOT be returned on non-extensible ; "BODY" fetch Melnikov Expires October 28, 2015 [Page 88] Internet-Draft IMAP4rev2 April 2015 body-fields = body-fld-param SP body-fld-id SP body-fld-desc SP body-fld-enc SP body-fld-octets body-fld-desc = nstring body-fld-dsp = "(" string SP body-fld-param ")" / nil body-fld-enc = (DQUOTE ("7BIT" / "8BIT" / "BINARY" / "BASE64"/ "QUOTED-PRINTABLE") DQUOTE) / string body-fld-id = nstring body-fld-lang = nstring / "(" string *(SP string) ")" body-fld-loc = nstring body-fld-lines = number body-fld-md5 = nstring body-fld-octets = number body-fld-param = "(" string SP string *(SP string SP string) ")" / nil body-type-1part = (body-type-basic / body-type-msg / body-type-text) [SP body-ext-1part] body-type-basic = media-basic SP body-fields ; MESSAGE subtype MUST NOT be "RFC822" body-type-mpart = 1*body SP media-subtype [SP body-ext-mpart] body-type-msg = media-message SP body-fields SP envelope SP body SP body-fld-lines body-type-text = media-text SP body-fields SP body-fld-lines capability = ("AUTH=" auth-type) / atom ; New capabilities MUST begin with "X" or be ; registered with IANA as standard or ; standards-track capability-data = "CAPABILITY" *(SP capability) SP "IMAP4rev2" *(SP capability) ; Servers MUST implement the STARTTLS, AUTH=PLAIN, ; and LOGINDISABLED capabilities ; Servers which offer RFC 1730 compatibility MUST Melnikov Expires October 28, 2015 [Page 89] Internet-Draft IMAP4rev2 April 2015 ; list "IMAP4" as the first capability. CHAR8 = %x01-ff ; any OCTET except NUL, %x00 charset = atom / quoted command = tag SP (command-any / command-auth / command-nonauth / command-select) CRLF ; Modal based on state command-any = "CAPABILITY" / "LOGOUT" / "NOOP" / enable / x-command ; Valid in all states command-auth = append / create / delete / examine / list / lsub / rename / select / status / subscribe / unsubscribe ; Valid only in Authenticated or Selected state command-nonauth = login / authenticate / "STARTTLS" ; Valid only when in Not Authenticated state command-select = "CHECK" / "CLOSE" / "UNSELECT" / "EXPUNGE" / copy / fetch / store / search / uid ; Valid only when in Selected state continue-req = "+" SP (resp-text / base64) CRLF copy = "COPY" SP sequence-set SP mailbox create = "CREATE" SP mailbox ; Use of INBOX gives a NO error date = date-text / DQUOTE date-text DQUOTE date-day = 1*2DIGIT ; Day of month date-day-fixed = (SP DIGIT) / 2DIGIT ; Fixed-format version of date-day date-month = "Jan" / "Feb" / "Mar" / "Apr" / "May" / "Jun" / "Jul" / "Aug" / "Sep" / "Oct" / "Nov" / "Dec" date-text = date-day "-" date-month "-" date-year date-year = 4DIGIT date-time = DQUOTE date-day-fixed "-" date-month "-" date-year Melnikov Expires October 28, 2015 [Page 90] Internet-Draft IMAP4rev2 April 2015 SP time SP zone DQUOTE delete = "DELETE" SP mailbox ; Use of INBOX gives a NO error digit-nz = %x31-39 ; 1-9 enable = "ENABLE" 1*(SP capability) enable-data = "ENABLED" *(SP capability) envelope = "(" env-date SP env-subject SP env-from SP env-sender SP env-reply-to SP env-to SP env-cc SP env-bcc SP env-in-reply-to SP env-message-id ")" env-bcc = "(" 1*address ")" / nil env-cc = "(" 1*address ")" / nil env-date = nstring env-from = "(" 1*address ")" / nil env-in-reply-to = nstring env-message-id = nstring env-reply-to = "(" 1*address ")" / nil env-sender = "(" 1*address ")" / nil env-subject = nstring env-to = "(" 1*address ")" / nil esearch-response = "ESEARCH" [search-correlator] [SP "UID"] *(SP search-return-data) ; ESEARCH response replaces SEARCH response ; from IMAP4rev1. examine = "EXAMINE" SP mailbox fetch = "FETCH" SP sequence-set SP ("ALL" / "FULL" / "FAST" / fetch-att / "(" fetch-att *(SP fetch-att) ")") fetch-att = "ENVELOPE" / "FLAGS" / "INTERNALDATE" / "RFC822" [".HEADER" / ".SIZE" / ".TEXT"] / Melnikov Expires October 28, 2015 [Page 91] Internet-Draft IMAP4rev2 April 2015 "BODY" ["STRUCTURE"] / "UID" / "BODY" section ["<" number "." nz-number ">"] / "BODY.PEEK" section ["<" number "." nz-number ">"] flag = "\Answered" / "\Flagged" / "\Deleted" / "\Seen" / "\Draft" / flag-keyword / flag-extension ; Does not include "\Recent" flag-extension = "\" atom ; Future expansion. Client implementations ; MUST accept flag-extension flags. Server ; implementations MUST NOT generate ; flag-extension flags except as defined by ; future standard or standards-track ; revisions of this specification. flag-fetch = flag / "\Recent" flag-keyword = atom flag-list = "(" [flag *(SP flag)] ")" flag-perm = flag / "\*" greeting = "*" SP (resp-cond-auth / resp-cond-bye) CRLF header-fld-name = astring header-list = "(" header-fld-name *(SP header-fld-name) ")" list = "LIST" SP mailbox SP list-mailbox list-mailbox = 1*list-char / string list-char = ATOM-CHAR / list-wildcards / resp-specials list-wildcards = "%" / "*" literal = "{" number "}" CRLF *CHAR8 ; Number represents the number of CHAR8s login = "LOGIN" SP userid SP password lsub = "LSUB" SP mailbox SP list-mailbox mailbox = "INBOX" / astring ; INBOX is case-insensitive. All case variants of ; INBOX (e.g., "iNbOx") MUST be interpreted as INBOX Melnikov Expires October 28, 2015 [Page 92] Internet-Draft IMAP4rev2 April 2015 ; not as an astring. An astring which consists of ; the case-insensitive sequence "I" "N" "B" "O" "X" ; is considered to be INBOX and not an astring. ; Refer to section 5.1 for further ; semantic details of mailbox names. mailbox-data = "FLAGS" SP flag-list / "LIST" SP mailbox-list / "LSUB" SP mailbox-list / esearch-response / "STATUS" SP mailbox SP "(" [status-att-list] ")" / number SP "EXISTS" / number SP "RECENT" mailbox-list = "(" [mbx-list-flags] ")" SP (DQUOTE QUOTED-CHAR DQUOTE / nil) SP mailbox mbx-list-flags = *(mbx-list-oflag SP) mbx-list-sflag *(SP mbx-list-oflag) / mbx-list-oflag *(SP mbx-list-oflag) mbx-list-oflag = "\Noinferiors" / flag-extension ; Other flags; multiple possible per LIST response mbx-list-sflag = "\Noselect" / "\Marked" / "\Unmarked" ; Selectability flags; only one per LIST response media-basic = ((DQUOTE ("APPLICATION" / "AUDIO" / "IMAGE" / "MESSAGE" / "VIDEO") DQUOTE) / string) SP media-subtype ; Defined in [MIME-IMT] media-message = DQUOTE "MESSAGE" DQUOTE SP DQUOTE "RFC822" DQUOTE ; Defined in [MIME-IMT] media-subtype = string ; Defined in [MIME-IMT] media-text = DQUOTE "TEXT" DQUOTE SP media-subtype ; Defined in [MIME-IMT] message-data = nz-number SP ("EXPUNGE" / ("FETCH" SP msg-att)) msg-att = "(" (msg-att-dynamic / msg-att-static) *(SP (msg-att-dynamic / msg-att-static)) ")" msg-att-dynamic = "FLAGS" SP "(" [flag-fetch *(SP flag-fetch)] ")" ; MAY change for a message msg-att-static = "ENVELOPE" SP envelope / "INTERNALDATE" SP date-time / "RFC822" [".HEADER" / ".TEXT"] SP nstring / Melnikov Expires October 28, 2015 [Page 93] Internet-Draft IMAP4rev2 April 2015 "RFC822.SIZE" SP number / "BODY" ["STRUCTURE"] SP body / "BODY" section ["<" number ">"] SP nstring / "UID" SP uniqueid ; MUST NOT change for a message nil = "NIL" nstring = string / nil number = 1*DIGIT ; Unsigned 32-bit integer ; (0 <= n < 4,294,967,296) nz-number = digit-nz *DIGIT ; Non-zero unsigned 32-bit integer ; (0 < n < 4,294,967,296) password = astring quoted = DQUOTE *QUOTED-CHAR DQUOTE QUOTED-CHAR = / "\" quoted-specials quoted-specials = DQUOTE / "\" rename = "RENAME" SP mailbox SP mailbox ; Use of INBOX as a destination gives a NO error response = *(continue-req / response-data) response-done response-data = "*" SP (resp-cond-state / resp-cond-bye / mailbox-data / message-data / capability-data / enable-data) CRLF response-done = response-tagged / response-fatal response-fatal = "*" SP resp-cond-bye CRLF ; Server closes connection immediately response-tagged = tag SP resp-cond-state CRLF resp-code-apnd = "APPENDUID" SP nz-number SP append-uid resp-code-copy = "COPYUID" SP nz-number SP uid-set SP uid-set resp-cond-auth = ("OK" / "PREAUTH") SP resp-text Melnikov Expires October 28, 2015 [Page 94] Internet-Draft IMAP4rev2 April 2015 ; Authentication condition resp-cond-bye = "BYE" SP resp-text resp-cond-state = ("OK" / "NO" / "BAD") SP resp-text ; Status condition resp-specials = "]" resp-text = ["[" resp-text-code "]" SP] text resp-text-code = "ALERT" / "BADCHARSET" [SP "(" charset *(SP charset) ")" ] / capability-data / "PARSE" / "PERMANENTFLAGS" SP "(" [flag-perm *(SP flag-perm)] ")" / "READ-ONLY" / "READ-WRITE" / "TRYCREATE" / "UIDNEXT" SP nz-number / "UIDVALIDITY" SP nz-number / "UNSEEN" SP nz-number / resp-code-apnd / resp-code-copy / "UIDNOTSTICKY" / "UNAVAILABLE" / "AUTHENTICATIONFAILED" / "AUTHORIZATIONFAILED" / "EXPIRED" / "PRIVACYREQUIRED" / "CONTACTADMIN" / "NOPERM" / "INUSE" / "EXPUNGEISSUED" / "CORRUPTION" / "SERVERBUG" / "CLIENTBUG" / "CANNOT" / "LIMIT" / "OVERQUOTA" / "ALREADYEXISTS" / "NONEXISTENT" / atom [SP 1*] search = "SEARCH" [search-return-opts] SP search-program search-correlator = SP "(" "TAG" SP tag-string ")" search-key = "ALL" / "ANSWERED" / "BCC" SP astring / "BEFORE" SP date / "BODY" SP astring / "CC" SP astring / "DELETED" / "FLAGGED" / "FROM" SP astring / "KEYWORD" SP flag-keyword / "NEW" / "OLD" / "ON" SP date / "RECENT" / "SEEN" / "SINCE" SP date / "SUBJECT" SP astring / "TEXT" SP astring / "TO" SP astring / "UNANSWERED" / "UNDELETED" / "UNFLAGGED" / "UNKEYWORD" SP flag-keyword / "UNSEEN" / ; Above this line were in [IMAP2] "DRAFT" / "HEADER" SP header-fld-name SP astring / "LARGER" SP number / "NOT" SP search-key / "OR" SP search-key SP search-key / "SENTBEFORE" SP date / "SENTON" SP date / Melnikov Expires October 28, 2015 [Page 95] Internet-Draft IMAP4rev2 April 2015 "SENTSINCE" SP date / "SMALLER" SP number / "UID" SP sequence-set / "UNDRAFT" / sequence-set / "(" search-key *(SP search-key) ")" search-modifier-name = tagged-ext-label search-mod-params = tagged-ext-val ; This non-terminal shows recommended syntax ; for future extensions. search-program = ["CHARSET" SP charset SP] search-key *(SP search-key) ; CHARSET argument to SEARCH MUST be ; registered with IANA. search-ret-data-ext = search-modifier-name SP search-return-value ; Note that not every SEARCH return option ; is required to have the corresponding ; ESEARCH return data. search-return-data = "MIN" SP nz-number / "MAX" SP nz-number / "ALL" SP sequence-set / "COUNT" SP number / search-ret-data-ext ; All return data items conform to search-ret-data-ext ; syntax search-return-opts = SP "RETURN" SP "(" [search-return-opt *(SP search-return-opt)] ")" search-return-opt = "MIN" / "MAX" / "ALL" / "COUNT" / search-ret-opt-ext ; conforms to generic search-ret-opt-ext ; syntax search-ret-opt-ext = search-modifier-name [SP search-mod-params] search-return-value = tagged-ext-val ; Data for the returned search option. ; A single "nz-number"/"number" value ; can be returned as an atom (i.e., without ; quoting). A sequence-set can be returned ; as an atom as well. section = "[" [section-spec] "]" section-msgtext = "HEADER" / "HEADER.FIELDS" [".NOT"] SP header-list / Melnikov Expires October 28, 2015 [Page 96] Internet-Draft IMAP4rev2 April 2015 "TEXT" ; top-level or MESSAGE/RFC822 part section-part = nz-number *("." nz-number) ; body part nesting section-spec = section-msgtext / (section-part ["." section-text]) section-text = section-msgtext / "MIME" ; text other than actual body part (headers, etc.) select = "SELECT" SP mailbox seq-number = nz-number / "*" ; message sequence number (COPY, FETCH, STORE ; commands) or unique identifier (UID COPY, ; UID FETCH, UID STORE commands). ; * represents the largest number in use. In ; the case of message sequence numbers, it is ; the number of messages in a non-empty mailbox. ; In the case of unique identifiers, it is the ; unique identifier of the last message in the ; mailbox or, if the mailbox is empty, the ; mailbox's current UIDNEXT value. ; The server should respond with a tagged BAD ; response to a command that uses a message ; sequence number greater than the number of ; messages in the selected mailbox. This ; includes "*" if the selected mailbox is empty. seq-range = seq-number ":" seq-number ; two seq-number values and all values between ; these two regardless of order. ; Example: 2:4 and 4:2 are equivalent and indicate ; values 2, 3, and 4. ; Example: a unique identifier sequence range of ; 3291:* includes the UID of the last message in ; the mailbox, even if that value is less than 3291. sequence-set = (seq-number / seq-range) ["," sequence-set] ; set of seq-number values, regardless of order. ; Servers MAY coalesce overlaps and/or execute the ; sequence in any order. ; Example: a message sequence number set of ; 2,4:7,9,12:* for a mailbox with 15 messages is ; equivalent to 2,4,5,6,7,9,12,13,14,15 ; Example: a message sequence number set of *:4,5:7 ; for a mailbox with 10 messages is equivalent to Melnikov Expires October 28, 2015 [Page 97] Internet-Draft IMAP4rev2 April 2015 ; 10,9,8,7,6,5,4,5,6,7 and MAY be reordered and ; overlap coalesced to be 4,5,6,7,8,9,10. status = "STATUS" SP mailbox SP "(" status-att *(SP status-att) ")" status-att = "MESSAGES" / "RECENT" / "UIDNEXT" / "UIDVALIDITY" / "UNSEEN" status-att-val = ("MESSAGES" SP number) / ("RECENT" SP number) / ("UIDNEXT" SP nz-number) / ("UIDVALIDITY" SP nz-number) / ("UNSEEN" SP number) ; Extensions to the STATUS responses ; should extend this production. ; Extensions should use the generic ; syntax defined by tagged-ext. status-att-list = status-att-val *(SP status-att-val) store = "STORE" SP sequence-set SP store-att-flags store-att-flags = (["+" / "-"] "FLAGS" [".SILENT"]) SP (flag-list / (flag *(SP flag))) string = quoted / literal subscribe = "SUBSCRIBE" SP mailbox tag = 1* tagged-ext-label = tagged-label-fchar *tagged-label-char ;; Is a valid RFC 3501 "atom". tagged-label-fchar = ALPHA / "-" / "_" / "." tagged-label-char = tagged-label-fchar / DIGIT / ":" tagged-ext-comp = astring / tagged-ext-comp *(SP tagged-ext-comp) / "(" tagged-ext-comp ")" ;; Extensions that follow this general ;; syntax should use nstring instead of ;; astring when appropriate in the context ;; of the extension. ;; Note that a message set or a "number" ;; can always be represented as an "atom". ;; An URL should be represented as ;; a "quoted" string. Melnikov Expires October 28, 2015 [Page 98] Internet-Draft IMAP4rev2 April 2015 tagged-ext-simple = sequence-set / number tagged-ext-val = tagged-ext-simple / "(" [tagged-ext-comp] ")" text = 1*TEXT-CHAR TEXT-CHAR = time = 2DIGIT ":" 2DIGIT ":" 2DIGIT ; Hours minutes seconds uid = "UID" SP (copy / fetch / search / store / uid-expunge) ; Unique identifiers used instead of message ; sequence numbers uid-expunge = "EXPUNGE" SP sequence-set ; Unique identifiers used instead of message ; sequence numbers uid-set = (uniqueid / uid-range) *("," uid-set) uid-range = (uniqueid ":" uniqueid) ; two uniqueid values and all values ; between these two regards of order. ; Example: 2:4 and 4:2 are equivalent. uniqueid = nz-number ; Strictly ascending unsubscribe = "UNSUBSCRIBE" SP mailbox userid = astring x-command = "X" atom zone = ("+" / "-") 4DIGIT ; Signed four-digit value of hhmm representing ; hours and minutes east of Greenwich (that is, ; the amount that the given time differs from ; Universal Time). Subtracting the timezone ; from the given time will give the UT form. ; The Universal Time zone is "+0000". Melnikov Expires October 28, 2015 [Page 99] Internet-Draft IMAP4rev2 April 2015 10. Author's Note This document is a revision or rewrite of earlier documents, and supercedes the protocol specification in those documents: RFC 2060, RFC 1730, unpublished IMAP2bis.TXT document, RFC 1176, and RFC 1064. 11. Security Considerations IMAP4rev2 protocol transactions, including electronic mail data, are sent in the clear over the network unless protection from snooping is negotiated. This can be accomplished either by the use of STARTTLS, negotiated privacy protection in the AUTHENTICATE command, or some other protection mechanism. 11.1. STARTTLS Security Considerations IMAP client and server implementations MUST implement the TLS_RSA_WITH_RC4_128_MD5 [TLS] cipher suite, and SHOULD implement the TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA [TLS] cipher suite. This is important as it assures that any two compliant implementations can be configured to interoperate. All other cipher suites are OPTIONAL. Note that this is a change from section 2.1 of [IMAP-TLS]. During the [TLS] negotiation, the client MUST check its understanding of the server hostname against the server's identity as presented in the server Certificate message, in order to prevent man-in-the-middle attacks. If the match fails, the client SHOULD either ask for explicit user confirmation, or terminate the connection and indicate that the server's identity is suspect. Matching is performed according to these rules: The client MUST use the server hostname it used to open the connection as the value to compare against the server name as expressed in the server certificate. The client MUST NOT use any form of the server hostname derived from an insecure remote source (e.g., insecure DNS lookup). CNAME canonicalization is not done. If a subjectAltName extension of type dNSName is present in the certificate, it SHOULD be used as the source of the server's identity. Matching is case-insensitive. A "*" wildcard character MAY be used as the left-most name component in the certificate. For example, *.example.com would match a.example.com, foo.example.com, etc. but would not match example.com. Melnikov Expires October 28, 2015 [Page 100] Internet-Draft IMAP4rev2 April 2015 If the certificate contains multiple names (e.g., more than one dNSName field), then a match with any one of the fields is considered acceptable. Both the client and server MUST check the result of the STARTTLS command and subsequent [TLS] negotiation to see whether acceptable authentication or privacy was achieved. 11.2. COPYUID and APPENDUID response codes The COPYUID and APPENDUID response codes return information about the mailbox, which may be considered sensitive if the mailbox has permissions set that permit the client to COPY or APPEND to the mailbox, but not SELECT or EXAMINE it. Consequently, these response codes SHOULD NOT be issued if the client does not have access to SELECT or EXAMINE the mailbox. 11.3. Other Security Considerations A server error message for an AUTHENTICATE command which fails due to invalid credentials SHOULD NOT detail why the credentials are invalid. Use of the LOGIN command sends passwords in the clear. This can be avoided by using the AUTHENTICATE command with a [SASL] mechanism that does not use plaintext passwords, by first negotiating encryption via STARTTLS or some other protection mechanism. A server implementation MUST implement a configuration that, at the time of authentication, requires: (1) The STARTTLS command has been negotiated. OR (2) Some other mechanism that protects the session from password snooping has been provided. OR (3) The following measures are in place: (a) The LOGINDISABLED capability is advertised, and [SASL] mechanisms (such as PLAIN) using plaintext passwords are NOT advertised in the CAPABILITY list. AND (b) The LOGIN command returns an error even if the password is correct. AND (c) The AUTHENTICATE command returns an error with all [SASL] mechanisms that use plaintext passwords, even if the password is correct. Melnikov Expires October 28, 2015 [Page 101] Internet-Draft IMAP4rev2 April 2015 A server error message for a failing LOGIN command SHOULD NOT specify that the user name, as opposed to the password, is invalid. A server SHOULD have mechanisms in place to limit or delay failed AUTHENTICATE/LOGIN attempts. Additional security considerations are discussed in the section discussing the AUTHENTICATE and LOGIN commands. 12. IANA Considerations IMAP4 capabilities are registered by publishing a standards track or IESG approved experimental RFC. The registry is currently located at: http://www.iana.org/assignments/imap4-capabilities As this specification revises the STARTTLS and LOGINDISABLED extensions previously defined in [IMAP-TLS], IANA is requested to update the registry accordingly. 13. References 13.1. Normative References [ABNF] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008, . [ANONYMOUS] Zeilenga, K., "Anonymous Simple Authentication and Security Layer (SASL) Mechanism", RFC 4505, June 2006, . [CHARSET] Freed, N. and J. Postel, "IANA Charset Registration Procedures", BCP 19, RFC 2978, October 2000, . [DIGEST-MD5] Leach, P. and C. Newman, "Using Digest Authentication as a SASL Mechanism", RFC 2831, May 2000, . [DISPOSITION] Troost, R., Dorner, S., and K. Moore, Ed., "Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field", RFC 2183, August 1997, . Melnikov Expires October 28, 2015 [Page 102] Internet-Draft IMAP4rev2 April 2015 [PLAIN] Zeilenga, K., Ed., "The PLAIN Simple Authentication and Security Layer (SASL) Mechanism", RFC 4616, August 2006, . [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997, . [LANGUAGE-TAGS] Alvestrand, H., "Content Language Headers", RFC 3282, May 2002, . [LOCATION] Palme, J., Hopmann, A., and N. Shelness, "MIME Encapsulation of Aggregate Documents, such as HTML (MHTML)", RFC 2557, March 1999, . [MD5] Myers, J. and M. Rose, "The Content-MD5 Header Field", RFC 1864, October 1995, . [MIME-HDRS] Moore, K., "MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text", RFC 2047, November 1996, . [MIME-IMB] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996, . [MIME-IMT] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, November 1996, . [RFC-5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, October 2008, . [SASL] Melnikov, A., Ed. and K. Zeilenga, Ed., "Simple Authentication and Security Layer (SASL)", RFC 4422, June 2006, . Melnikov Expires October 28, 2015 [Page 103] Internet-Draft IMAP4rev2 April 2015 [TLS] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, August 2008, . [UTF-7] Goldsmith, D. and M. Davis, "UTF-7 A Mail-Safe Transformation Format of Unicode", RFC 2152, May 1997, . [MULTIAPPEND] Crispin, M., "Internet Message Access Protocol (IMAP) - MULTIAPPEND Extension", RFC 3502, March 2003, . [IMAP-IMPLEMENTATION] Leiba, B., "IMAP4 Implementation Recommendations", RFC 2683, September 1999, . [IMAP-MULTIACCESS] Gahrns, M., "IMAP4 Multi-Accessed Mailbox Practice", RFC 2180, July 1997, . 13.2. Informative References (related protocols) [IMAP-DISC] Melnikov, A., Ed., "Synchronization Operations for Disconnected IMAP4 Clients", RFC 4549, June 2006, . [IMAP-MODEL] Crispin, M., "Distributed Electronic Mail Models in IMAP4", RFC 1733, December 1994, . [ACAP] Newman, C. and J. G. Myers, "ACAP -- Application Configuration Access Protocol", RFC 2244, November 1997, . [SMTP] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321, October 2008, . [RFC4314] Melnikov, A., "IMAP4 Access Control List (ACL) Extension", RFC 4314, December 2005, . [RFC2087] Myers, J., "IMAP4 QUOTA extension", RFC 2087, January 1997, . Melnikov Expires October 28, 2015 [Page 104] Internet-Draft IMAP4rev2 April 2015 13.3. Informative References (historical aspects of IMAP and related protocols) [IMAP-COMPAT] Crispin, M., "IMAP4 Compatibility with IMAP2bis", RFC 2061, December 1996, . [IMAP-HISTORICAL] Crispin, M., "IMAP4 Compatibility with IMAP2 and IMAP2bis", RFC 1732, December 1994, . [IMAP-OBSOLETE] Crispin, M., "Internet Message Access Protocol - Obsolete Syntax", RFC 2062, December 1996, . [IMAP2] Crispin, M., "Interactive Mail Access Protocol: Version 2", RFC 1176, August 1990, . [RFC-822] Crocker, D., "STANDARD FOR THE FORMAT OF ARPA INTERNET TEXT MESSAGES", STD 11, RFC 822, August 1982, . [RFC-821] Postel, J., "Simple Mail Transfer Protocol", STD 10, RFC 821, August 1982, . [IMAP-TLS] Newman, C., "Using TLS with IMAP, POP3 and ACAP", RFC 2595, June 1999, . Appendix A. Backward compatibility with IMAP4rev1 An implementation that wants to remain compatible with IMAP4rev1 can advertise both IMAP4rev1 and IMAP4rev2 in its CAPABILITY response/ response code. While some IMAP4rev1 response were removed in IMAP4rev2, their presence will not break IMAP4rev2-only clients. If both IMAP4rev1 and IMAP4rev2 are advertised, an IMAP client that wants to use IMAP4rev2 MUST issue "ENABLE IMAP4rev2" command. Appendix B. Changes from RFC 3501 / IMAP4rev1 The following is the plan for remaining changes. The plan might change over time. Melnikov Expires October 28, 2015 [Page 105] Internet-Draft IMAP4rev2 April 2015 1. Fold in the following extensions/RFC: RFC 5530 (IMAP Response Codes), UIDPLUS (done), ENABLE (done), ESEARCH, LITERAL+, NAMESPACE. 2. Possibly fold in the following extensions/RFC: SEARCHRES, SPECIAL-USE, Base LIST-EXTENDED syntax + deprecate LSUB, STATUS- in-LIST, BINARY. 3. Add CLOSED response code (from CONDSTORE), 4. Drop UTF-7, all mailboxes are always in UTF-8. 5. Update recommendations on TLS ciphers to match UTA WG work. 6. Deprecated features: RECENT response on SELECT/EXAMINE, Recent flag, RECENT STATUS item. UNSEEN response code on SELECT/ EXAMINE. SEARCH response (use ESEARCH instead). 1. Folded in IMAP UNSELECT (RFC 3691), UIDPLUS (RFC 4315), ESEARCH (RFC 4731), ENABLE (RFC 5161) extensions. Also folded RFC 5530. Appendix C. Acknowledgement Earlier versions of this document were edited by Mark Crispin. Sadly, he is no longer available to help with this work. Editor of this revisions is hoping that Mark would have approved. Thank you to Tony Hansen for helping with the index generation. This document incorporate text from RFC 4315, RFC 4466, RFC 4731, RFC 5161, so work done by authors/editors of these documents is appreciated. Index + +FLAGS 60 +FLAGS.SILENT 60 - -FLAGS 60 -FLAGS.SILENT 60 A ALERT (response code) 65 ALL (fetch item) 56 ALL (search key) 52 ALL (search result option) 51 Melnikov Expires October 28, 2015 [Page 106] Internet-Draft IMAP4rev2 April 2015 ALREADYEXISTS (response code) 65 ANSWERED (search key) 52 APPEND (command) 45 APPENDUID (response code) 66 AUTHENTICATE (command) 27 AUTHENTICATIONFAILED (response code) 66 AUTHORIZATIONFAILED (response code) 66 B BAD (response) 73 BADCHARSET (response code) 67 BCC (search key) 52 BEFORE (search key) 53 BODY (fetch item) 56 BODY (fetch result) 80 BODY (search key) 53 BODY.PEEK[
]<> (fetch item) 58 BODYSTRUCTURE (fetch item) 59 BODYSTRUCTURE (fetch result) 80 BODY[
]<> (fetch result) 80 BODY[
]<> (fetch item) 56 BYE (response) 73 Body Structure (message attribute) 13 C CANNOT (response code) 67 CAPABILITY (command) 24 CAPABILITY (response code) 67 CAPABILITY (response) 74 CC (search key) 53 CHECK (command) 48 CLIENTBUG (response code) 67 CLOSE (command) 49 CONTACTADMIN (response code) 67 COPY (command) 60 COPYUID (response code) 67 CORRUPTION (response code) 68 COUNT (search result option) 51 CREATE (command) 35 D DELETE (command) 36 DELETED (search key) 53 DRAFT (search key) 53 E ENABLE (command) 31 ENVELOPE (fetch item) 59 Melnikov Expires October 28, 2015 [Page 107] Internet-Draft IMAP4rev2 April 2015 ENVELOPE (fetch result) 83 ESEARCH (response) 77 EXAMINE (command) 34 EXPIRED (response code) 68 EXPUNGE (command) 50 EXPUNGE (response) 79 EXPUNGEISSUED (response code) 68 Envelope Structure (message attribute) 13 F FAST (fetch item) 56 FETCH (command) 56 FETCH (response) 80 FLAGGED (search key) 53 FLAGS (fetch item) 59 FLAGS (fetch result) 84 FLAGS (response) 77 FLAGS (store command data item) 60 FLAGS.SILENT (store command data item) 60 FROM (search key) 53 FULL (fetch item) 56 Flags (message attribute) 11 H HEADER (part specifier) 57 HEADER (search key) 53 HEADER.FIELDS (part specifier) 57 HEADER.FIELDS.NOT (part specifier) 57 I INTERNALDATE (fetch item) 59 INTERNALDATE (fetch result) 84 INUSE (response code) 69 Internal Date (message attribute) 12 K KEYWORD (search key) 53 Keyword (type of flag) 12 L LARGER (search key) 53 LIMIT (response code) 69 LIST (command) 40 LIST (response) 75 LOGOUT (command) 25 LSUB (command) 43 LSUB (response) 76 Melnikov Expires October 28, 2015 [Page 108] Internet-Draft IMAP4rev2 April 2015 M MAX (search result option) 51 MAY (specification requirement term) 5 MESSAGES (status item) 45 MIME (part specifier) 57 MIN (search result option) 51 MUST (specification requirement term) 5 MUST NOT (specification requirement term) 5 Message Sequence Number (message attribute) 11 N NEW (search key) 53 NO (response) 72 NONEXISTENT (response code) 69 NOOP (command) 25 NOPERM (response code) 69 NOT (search key) 53 O OK (response) 72 OLD (search key) 53 ON (search key) 53 OPTIONAL (specification requirement term) 5 OR (search key) 53 OVERQUOTA (response code) 69 P PARSE (response code) 70 PERMANENTFLAGS (response code) 70 PREAUTH (response) 73 PRIVACYREQUIRED (response code) 70 Permanent Flag (class of flag) 12 R READ-ONLY (response code) 70 READ-WRITE (response code) 70 RECENT (search key) 53 RECENT (status item) 45 RECOMMENDED (specification requirement term) 5 RENAME (command) 37 REQUIRED (specification requirement term) 5 RFC822 (fetch item) 59 RFC822 (fetch result) 84 RFC822.HEADER (fetch item) 59 RFC822.HEADER (fetch result) 84 RFC822.SIZE (fetch item) 59 RFC822.SIZE (fetch result) 84 RFC822.TEXT (fetch item) 59 Melnikov Expires October 28, 2015 [Page 109] Internet-Draft IMAP4rev2 April 2015 RFC822.TEXT (fetch result) 84 S SEARCH (command) 50 SEEN (search key) 53 SELECT (command) 33 SENTBEFORE (search key) 54 SENTON (search key) 54 SENTSINCE (search key) 54 SERVERBUG (response code) 70 SHOULD (specification requirement term) 5 SHOULD NOT (specification requirement term) 5 SINCE (search key) 54 SMALLER (search key) 54 STARTTLS (command) 26 STATUS (command) 44 STATUS (response) 77 STORE (command) 59 SUBJECT (search key) 54 SUBSCRIBE (command) 39 Session Flag (class of flag) 12 System Flag (type of flag) 11 T TEXT (part specifier) 57 TEXT (search key) 54 TO (search key) 54 TRYCREATE (response code) 71 U UID (command) 61 UID (fetch item) 59 UID (fetch result) 84 UID (search key) 54 UIDNEXT (response code) 71 UIDNEXT (status item) 45 UIDNOTSTICKY (response code) 71 UIDVALIDITY (response code) 71 UIDVALIDITY (status item) 45 UNANSWERED (search key) 54 UNAVAILABLE (response code) 71 UNDELETED (search key) 54 UNDRAFT (search key) 54 UNFLAGGED (search key) 54 UNKEYWORD (search key) 54 UNSEEN (response code) 71 UNSEEN (search key) 54 UNSEEN (status item) 45 Melnikov Expires October 28, 2015 [Page 110] Internet-Draft IMAP4rev2 April 2015 UNSELECT (command) 49 UNSUBSCRIBE (command) 40 Unique Identifier (UID) (message attribute) 9 X X (command) 63 [ [RFC-5322] Size (message attribute) 12 \ \Answered (system flag) 11 \Deleted (system flag) 11 \Draft (system flag) 11 \Flagged (system flag) 11 \Marked (mailbox name attribute) 76 \Noinferiors (mailbox name attribute) 76 \Noselect (mailbox name attribute) 76 \Recent (system flag) 12 \Seen (system flag) 11 \Unmarked (mailbox name attribute) 76 Author's Address Alexey Melnikov (editor) Isode Ltd 14 Castle Mews Hampton, Middlesex TW12 2NP UK Email: Alexey.Melnikov@isode.com Melnikov Expires October 28, 2015 [Page 111]