IMAPEXT Working Group A. Melnikov Internet Draft Isode Ltd. Document: draft-melnikov-imap-postaddress-01 August 2004 Expires: February 2005 IMAP4 POSTADDRESS extension Status of this Memo By submitting this Internet-Draft, I certify that any applicable patent or other IPR claims of which I am aware have been disclosed, or will be disclosed, and any of which I become aware will be disclosed, in accordance with RFC 3668. Internet Drafts are working documents of the Internet Engineering Task Force (IETF), its Areas, and its Working Groups. Note that other groups may also distribute working documents as Internet Drafts. Internet Drafts are draft documents valid for a maximum of six months. Internet Drafts may be updated, replaced, or obsoleted by other documents at any time. It is not appropriate to use Internet Drafts as reference material or to cite them other than as ``work in progress''. The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Directories on ds.internic.net, nic.nordu.net, ftp.isi.edu, or munnari.oz.au. A revised version of this draft document will be submitted to the RFC editor as a Proposed Standard for the Internet Community. Discussion and suggestions for improvement are requested. Distribution of this draft is unlimited. Abstract The POSTADDRESS extension of the Internet Message Access Protocol [IMAP4] permits a client to discover an email address that can be used to send messages to an IMAP mailbox. 1. Conventions Used in this Document In examples, "C:" and "S:" indicate lines sent by the client and server respectively. In all examples "/" character is used as hierarchy separator. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [KEYWORDS]. 2. Introduction and Overview IMAP POSTADDRESS extension can be used to discover an email address for a given IMAP mailbox. Many email clients support saving a copy of an outgoing message in "sent messages" or "outbox" mailbox. Typically, those email clients send the message first using SMTP. After that they upload a copy of the message using IMAP APPEND. Effectively, the message is sent twice: once using SMTP and once using IMAP. If the IMAP server supports the POSTADDRESS extension, the mail client can avoid uploading a copy of the message using IMAP APPEND. This can be achieved by specifying an additional recipient, returned by LIST (POSTADDRESS) command, during the SMTP transaction. A server that supports POSTADDRESS parameter to the LIST command SHALL return "POSTADDRESS" in its capability response. 3. LIST command with the POSTADDRESS parameter This document defines a new return option POSTADDRESS to the LIST command that requests the server to return an email address that can be used to post email to a mailbox returned by the LIST command. The POSTADDRESS return option causes the server to return LIST with POSTADDRESS information (see section 4). If posting to the mailbox is not allowed or not supported the server MUST return NIL. For example, if the server also supports [ACL] extension and if the user that is issuing LIST (POSTADDRESS) doesn't have the "p" right on the mailbox, the extended LIST response MUST return NIL in POSTADDRESS information. Also note, that if the server also supports [ACL] extension and if the user doesn't have either "l" or "r" right on the mailbox, the server MUST NOT disclose the mailbox existence. Example: C: A002 LIST () "" INBOX RETURN (POSTADDRESS) S: * LIST () "/" INBOX (("POSTADDRESS" "user1@example.com")) S: A002 OK List with postaddress info completed Note that the empty () after the LIST command name are not required, which is shown below: Example: C: A002 LIST () "" inbox.Drafts RETURN (POSTADDRESS) S: * LIST () "/" inbox.Drafts (("POSTADDRESS" NIL)) S: A002 OK List with postaddress info completed 4. Extended LIST response with POSTADDRESS information Contents: name attributes hierarchy delimiter mailbox name email address for posting to the mailbox This version of LIST response occurs as a result of a LIST (POSTADDRESS) command. The proposed syntax conforms to the syntax of an extended LIST response as defined by mbox-list-extended ABNF element of [LISTEXT]. The meaning of "name attributes" and "hierarchy delimiter" is described in section 7.2.2 of [IMAP4]. This is followed by the extension part that includes "POSTADDRESS" tag followed by an email address that can be used to post email to the mailbox. Example: S: * LIST () "/" Sent (("POSTADDRESS" "user+Sent@example.com")) 5. Formal Syntax Formal syntax is defined using ABNF [ABNF] as modified by [IMAP4]. Non-terminals referenced but not defined below are as defined by [IMAP4] or [LISTEXT]. Except as noted otherwise, all alphabetic characters are case-insensitive. The use of upper or lower case characters to define token strings is for editorial clarity only. Implementations MUST accept these strings in a case-insensitive fashion. return-option =/ "POSTADDRESS" ;; is defined in [LISTEXT] postaddr_data = "(" <"> "POSTADDRESS" <"> SP email_address ")" ;; postaddr_data conforms to the syntax of ;; mbox-list-extended-item from [LISTEXT] email_address = nstring ;; NIL if email address is not known 6. Security Considerations Unless proper access restrictions are implemented, the POSTADDRESS extension can be used by a user to harvest email addresses. Additional security considerations are discussed in Section 3. 7. IANA Considerations IANA is requested to register the following LISTEXT return option as specified in [LISTEXT]: To: iana@iana.org Subject: Registration of LISTEXT option POSTADDRESS LISTEXT option name: POSTADDRESS LISTEXT option type: RETURN LISTEXT option description: Causes the LIST command to return email address (if any) for posting to a returned mailbox. Published specification : this RFC, section 3. Security considerations: this RFC, section 6. Intended usage: COMMON Person & email address to contact for further information: Alexey Melnikov Owner/Change controller: IESG 8. Normative References [KEYWORDS] Bradner, "Key words for use in RFCs to Indicate Requirement Levels", RFC 2119, Harvard University, March 1997. [ABNF] Crocker, Overell, "Augmented BNF for Syntax Specifications: ABNF", RFC 2234, Internet Mail Consortium, Demon Internet Ltd, November 1997. [IMAP4] Crispin, M., "Internet Message Access Protocol - Version 4rev1", RFC 3501, University of Washington, March 2003. [LISTEXT] Leiba, B. and A. Melnikov, "IMAP4 LIST Command Extensions", work in progress, draft-ietf-imapext-list-extensions-xx.txt. [ACL] Myers, J., "IMAP4 ACL extension", RFC 2086, Carnegie Mellon, January 1997. 9. Aknowledgements The author would like to thank Ken Murchison for reminding that POSTADDRESS extension should not be a part of ACL2. 10. Author's Address Alexey Melnikov Isode Limited 5 Castle Business Village 36 Station Road Hampton, Middlesex TW12 2BX, UK Email: Alexey.Melnikov@isode.com URI: http://www.melnikov.ca/ 11. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. 12. Full Copyright Statement Copyright (C) The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.