NETMOD Working Group S. Mansfield, Ed. Internet-Draft Ericsson Inc. Intended status: Informational B. Zeuner Expires: January 4, 2016 Deutsche Telekom AG N. Davis Ciena Y. Yun Fiberhome Y. Tochio Fujitsu K. Lam E. Varma Alcatel Lucent July 3, 2015 Guidelines for Translation of UML Information Model to YANG Data Model draft-mansfield-netmod-uml-to-yang-00 Abstract This document defines guidelines for translation of data modeled with UML to YANG including mapping of object classes, attributes, data types, associations, interfaces, operations and operation parameters, notifications, and lifecycle. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on January 4, 2016. Copyright Notice Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved. Mansfield, et al. Expires January 4, 2016 [Page 1] Internet-Draft Guidelines UML to YANG July 2015 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5. Mapping Guidelines . . . . . . . . . . . . . . . . . . . . . 4 5.1. Mapping Guideline Considerations . . . . . . . . . . . . 4 5.2. Mapping of Object Classes . . . . . . . . . . . . . . . . 5 5.3. Mapping of Attributes . . . . . . . . . . . . . . . . . . 6 5.4. Mapping of Types . . . . . . . . . . . . . . . . . . . . 8 5.4.1. Mapping of Primitive Types . . . . . . . . . . . . . 8 5.4.2. Mapping of Enumeration Types . . . . . . . . . . . . 8 5.4.3. Mapping of Basic Data Types . . . . . . . . . . . . . 9 5.4.4. Mapping of Complex Data Types . . . . . . . . . . . . 10 5.5. Mapping of Associations . . . . . . . . . . . . . . . . . 11 5.6. Mapping of Interfaces . . . . . . . . . . . . . . . . . . 12 5.7. Mapping of Operations . . . . . . . . . . . . . . . . . . 12 5.8. Mapping of Operation Parameters . . . . . . . . . . . . . 13 5.9. Mapping of Notifications . . . . . . . . . . . . . . . . 14 5.10. Mapping of Lifecycle . . . . . . . . . . . . . . . . . . 15 5.11. Other Mappings . . . . . . . . . . . . . . . . . . . . . 16 6. Mapping Issues . . . . . . . . . . . . . . . . . . . . . . . 16 6.1. Mapping of Recursion . . . . . . . . . . . . . . . . . . 16 7. Mapping Patterns . . . . . . . . . . . . . . . . . . . . . . 16 7.1. UML Recursion . . . . . . . . . . . . . . . . . . . . . . 16 7.2. UML Conditional Pacs . . . . . . . . . . . . . . . . . . 16 7.3. XOR Relationship . . . . . . . . . . . . . . . . . . . . 17 8. Mapping Basics . . . . . . . . . . . . . . . . . . . . . . . 17 8.1. UML-YANG or XMI-YANG . . . . . . . . . . . . . . . . . . 17 8.2. XMI Differences . . . . . . . . . . . . . . . . . . . . . 17 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 17 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17 11. Security Considerations . . . . . . . . . . . . . . . . . . . 17 12. References . . . . . . . . . . . . . . . . . . . . . . . . . 17 12.1. Normative References . . . . . . . . . . . . . . . . . . 17 12.2. Informative References . . . . . . . . . . . . . . . . . 18 Appendix A. Example . . . . . . . . . . . . . . . . . . . . . . 18 Mansfield, et al. Expires January 4, 2016 [Page 2] Internet-Draft Guidelines UML to YANG July 2015 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 19 1. Introduction As discussed in draft-lam-teas-usage-info-model-net-topology [5] a Data Model (DM) may be derived from an Information Model (IM). However, in order to assure a consistent and valid data modelling language representation that enables maximum interoperability, translation guidelines are required. A set of translation rules also assists in development of automated tooling. This draft defines guidelines for translation of data modelled with UML [6] (as constrained by the ONF's UML Modeling Guidelines [7]) to YANG (defined in RFC6020 [2] and YANG Update [3]) including mapping of object classes, attributes, data types, associations, interfaces, operations and operation parameters, notifications, and lifecycle. 2. Keywords The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [1]. 3. Terminology The following terms are defined in RFC6020 [2] o anydata o anyxml o augment o container o data node o identity o instance identifier o leaf o leaf-list o list o module Mansfield, et al. Expires January 4, 2016 [Page 3] Internet-Draft Guidelines UML to YANG July 2015 o submodule The following terms are defined in UML 2.4 [6] o association o attribute o data type o interface o object class o operation o parameter o signal (used to model notifications) 4. Overview This document defines translation rules for all constructs used in a UML based IM to a data model using YANG. While some mapping rules are straightforward, an IM in UML uses some constructs that cannot be mapped directly to a DM using YANG and conventions are described to make the translation predictable. Additionally, in some cases multiple mapping approaches are possible and selection among these is also necessary to assure interoperability. Mapping guidelines for these constructs are provided in the following sections. 5. Mapping Guidelines 5.1. Mapping Guideline Considerations Where "??" is inserted in the table, it means that the specific mapping is for further study as it is either as yet unclear how to map the construct or that there are multiple ways of doing the mapping and a single one needs to be selected. A table will be included summarizing constructs in UML that do not directly map to YANG and where in this draft the associated guidelines for mapping these constructs will be provided. Mansfield, et al. Expires January 4, 2016 [Page 4] Internet-Draft Guidelines UML to YANG July 2015 5.2. Mapping of Object Classes +-------------------------------------------------------------------+ | Object Class --> "list" statement (key property) or | | "container" statement | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | superclass(es) | ?? | | +-------------------------------------------------------------------+ | abstract | abstract: "container" | | | | not abstract: "list" | | +-------------------------------------------------------------------+ | objectCreationNotific-| ?? | | | ation | | | +-------------------------------------------------------------------+ | objectDeletionNotific-| ?? | | | ation | | | +-------------------------------------------------------------------+ | support | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | condition | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | operation | "action" | | | | substatement | | +-------------------------------------------------------------------+ | XOR | "choice" | | | | substatement | | +-------------------------------------------------------------------+ | ?? | "config" | | | | substatement | | +-------------------------------------------------------------------+ | error notfication? | "must" | | | | substatement | | +-------------------------------------------------------------------+ | object identifier | list::"key" | | | | substatement | | +-------------------------------------------------------------------+ | ?? | list::"min-elements" | min-elements | | | "max-elements" | default = 0 | | | substatements | max-elements | | | | default=unbounded| | | | mandatory | Mansfield, et al. Expires January 4, 2016 [Page 5] Internet-Draft Guidelines UML to YANG July 2015 | | | default=false | +-------------------------------------------------------------------+ | Conditional PACs | container::presence" | | | | substatement | | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current" | | | substatement | "deprecated" | | | | "obsolete" | | | | default="current"| +-------------------------------------------------------------------+ | ?? | list::"unique" | | | | substatement | | +-------------------------------------------------------------------+ | complex attribute | "uses" substatement | | +-------------------------------------------------------------------+ | {} | "when" substatement | | +-------------------------------------------------------------------+ Figure 1: Mapping of Object Classes 5.3. Mapping of Attributes +-------------------------------------------------------------------+ | Attribute --> "leaf" (single) or "leaf list" (multiple) | | statement | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | type | "type" substatement | | | | (built-in or derived) | | +-------------------------------------------------------------------+ | readOnly | "config" substatement | | | | (false) | | +-------------------------------------------------------------------+ | isOrdered | "ordered-by" | | | | substatement | | | |("system" or "user") | | +-------------------------------------------------------------------+ | multiplicity | "min-elements" and | min-elements | | | "max-elements" | default = 0 | | | substatements | max-elements | | | [0..x]=>mandatory | default=unbounded| Mansfield, et al. Expires January 4, 2016 [Page 6] Internet-Draft Guidelines UML to YANG July 2015 | | substatement=false | mandatory | | | [1..x]=>mandatory | default=false | | | substatement=true | | | | | | +-------------------------------------------------------------------+ | defaultValue | "default" | If a default value| | | substatement | exists and it is | | | | the desired value,| | | | the parameter does| | | | not have to be | | | | explicitly config-| | | | ured by the user. | +-------------------------------------------------------------------+ | isInvariant | "config" | | | | substatement (false) | | +-------------------------------------------------------------------+ | valueRange | "range" or "length" | | | | substatement of "type"| | | | substatement | | +-------------------------------------------------------------------+ | passedById | ?? | | +-------------------------------------------------------------------+ | support | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | condition | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | error notfication? | "must" | | | | substatement | | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current" | | | substatement | "deprecated" | | | | "obsolete" | | | | default="current"| +-------------------------------------------------------------------+ | unit? | "units" substatement | | +-------------------------------------------------------------------+ | {} | "when" substatement | | +-------------------------------------------------------------------+ Figure 2: Mapping of Attributes Mansfield, et al. Expires January 4, 2016 [Page 7] Internet-Draft Guidelines UML to YANG July 2015 5.4. Mapping of Types +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | Primitive Type | ?? | new built-in type?| +-------------------------------------------------------------------+ | Enumeration | "enum" statement | | +-------------------------------------------------------------------+ | Basic Data Type | "typeDef" statement | | +-------------------------------------------------------------------+ | Complex Data Type | "grouping" statement | | +-------------------------------------------------------------------+ Figure 3: Mapping of Types Note: YANG allows also in-line enumerations which are not possible in UML 5.4.1. Mapping of Primitive Types +-------------------------------------------------------------------+ | Primitive Type -> new built-in type? | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | documentation | ?? | | +-------------------------------------------------------------------+ Figure 4: Mapping of Primitive Types 5.4.2. Mapping of Enumeration Types Mansfield, et al. Expires January 4, 2016 [Page 8] Internet-Draft Guidelines UML to YANG July 2015 +-------------------------------------------------------------------+ | Enumeration Type -> "enum" statement | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | literal name | "value" | | | | substatement | | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current", | | | substatement | "deprecated", | | | | "obsolete" | | | | default=current | +-------------------------------------------------------------------+ | ?? | "if-feature" statement| | +-------------------------------------------------------------------+ Figure 5: Mapping of Enumeration Types 5.4.3. Mapping of Basic Data Types Mansfield, et al. Expires January 4, 2016 [Page 9] Internet-Draft Guidelines UML to YANG July 2015 +-------------------------------------------------------------------+ | Basic Data Type -> "typeDef" statement | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | type | "type" substatement | | | | (built-in type) | | +-------------------------------------------------------------------+ | defaultValue | "default" | If a default value| | | substatement | exists and it is | | | | the desired value,| | | | the parameter does| | | | not have to be | | | | explicitly config-| | | | ured by the user. | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current", | | | substatement | "deprecated", | | | | "obsolete" | | | | default=current | +-------------------------------------------------------------------+ | unit? | "units" statement | | +-------------------------------------------------------------------+ Figure 6: Mapping of Basic Data Types 5.4.4. Mapping of Complex Data Types Mansfield, et al. Expires January 4, 2016 [Page 10] Internet-Draft Guidelines UML to YANG July 2015 +-------------------------------------------------------------------+ | Complex Data Type -> "grouping" statement | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | not used | "action" substatement | | +-------------------------------------------------------------------+ | XOR | "choice" | | | | substatement | | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current", | | | substatement | "deprecated", | | | | "obsolete" | | | | default=current | +-------------------------------------------------------------------+ | complex attribute | "uses" statement | | +-------------------------------------------------------------------+ Figure 7: Mapping of Complex Data Types 5.5. Mapping of Associations +-------------------------------------------------------------------+ | Associations | +-------------------------------------------------------------------+ | UML Artifact | YANG Artifact | Comment | +-------------------------------------------------------------------+ | Inheritance | "extension" or | | | | "augment" statement | | +-------------------------------------------------------------------+ | Composition | "container" statement | | +-------------------------------------------------------------------+ | Aggregation | "container" statement | | +-------------------------------------------------------------------+ Figure 8: Mapping of Associations Figure 9: Association Mapping Examples (Available in PDF or HTML versions) Mansfield, et al. Expires January 4, 2016 [Page 11] Internet-Draft Guidelines UML to YANG July 2015 5.6. Mapping of Interfaces +-------------------------------------------------------------------+ | UML Interface -> Container? | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | abstract | ?? | | +-------------------------------------------------------------------+ | support | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | condition | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ Figure 10: Mapping of Interfaces 5.7. Mapping of Operations Mansfield, et al. Expires January 4, 2016 [Page 12] Internet-Draft Guidelines UML to YANG July 2015 +-------------------------------------------------------------------+ | Operation -> "action" and "rpc" statements | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | pre-condition | ?? | | +-------------------------------------------------------------------+ | post-condition | ?? | | +-------------------------------------------------------------------+ | input parameter | "input" substatement | | +-------------------------------------------------------------------+ | output parameter | "output" substatement | | +-------------------------------------------------------------------+ | operation exceptions | ?? | | +-------------------------------------------------------------------+ | isOperationIdempotent | ?? | | +-------------------------------------------------------------------+ | isAtomic | ?? | | +-------------------------------------------------------------------+ | support | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | condition | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current", | | | substatement | "deprecated", | | | | "obsolete" | | | | default=current | +-------------------------------------------------------------------+ Figure 11: Mapping of Operations Note: The difference between an action and an rpc is that an action is tied to a node in the data tree, whereas an rpc is not. 5.8. Mapping of Operation Parameters Mansfield, et al. Expires January 4, 2016 [Page 13] Internet-Draft Guidelines UML to YANG July 2015 +-------------------------------------------------------------------+ | Operation Parameters | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | direction | "input" or "output" | | | | substatement | | +-------------------------------------------------------------------+ | type | see mapping of | | | | attribute types | | | | (grouping, leaf, | | | | leaf-list, list, | | | | typedef, uses) | | +-------------------------------------------------------------------+ | isOrdered | | | +-------------------------------------------------------------------+ | multiplicity | | | +-------------------------------------------------------------------+ | defaultValue | ?? | | +-------------------------------------------------------------------+ | valueRange | ?? | | +-------------------------------------------------------------------+ | passedByID | ?? | | +-------------------------------------------------------------------+ | support | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | condition | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | XOR | "choice" | | | | substatement | | +-------------------------------------------------------------------+ | error notification? | "must" | | | | substatement | | +-------------------------------------------------------------------+ | complex parameter | "uses" | | | | substatement | | +-------------------------------------------------------------------+ Figure 12: Mapping of Operation Parameters 5.9. Mapping of Notifications Mansfield, et al. Expires January 4, 2016 [Page 14] Internet-Draft Guidelines UML to YANG July 2015 +-------------------------------------------------------------------+ | Signal -> "notification" statement | +-------------------------------------------------------------------+ | documentation | "description" | | | | substatement | | +-------------------------------------------------------------------+ | support | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | condition | "if-feature" | | | | substatement | | +-------------------------------------------------------------------+ | XOR | "choice" | | | | substatement | | +-------------------------------------------------------------------+ | error notification? | "must" | | | | substatement | | +-------------------------------------------------------------------+ | hyperlink? | "reference" | Papyrus doesn't | | | substatement | support hyperlinks| +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current", | | | substatement | "deprecated", | | | | "obsolete" | | | | default=current | +-------------------------------------------------------------------+ | complex attribute | "uses" | | | | substatement | | +-------------------------------------------------------------------+ Figure 13: Mapping of Notifications 5.10. Mapping of Lifecycle +-------------------------------------------------------------------+ | UML Lifecycle | +-------------------------------------------------------------------+ | lifecycle stereotypes | "status" | "current", | | | substatement | "deprecated", | | | | "obsolete" | | | | default=current | +-------------------------------------------------------------------+ Figure 14: Mapping of Lifecycle Mansfield, et al. Expires January 4, 2016 [Page 15] Internet-Draft Guidelines UML to YANG July 2015 5.11. Other Mappings +-------------------------------------------------------------------+ | UML Lifecycle | +-------------------------------------------------------------------+ | Conditional Package | "container" statement | | | | with | | | | "presence" | | | | substatement | | +-------------------------------------------------------------------+ | Primitive Type | Built-In Type | | +-------------------------------------------------------------------+ | Package | Submodule | | +-------------------------------------------------------------------+ Figure 15: Other Mappings 6. Mapping Issues When translating from UML information models to YANG data models some mapping rules are straightforward, and some are not. This section provides considerations and recommendations for the more complex translations. 6.1. Mapping of Recursion o Statically define a number of recursion levels o Reference Based Approach In the static approach, some number of recursion levels is pre- configured. In the Reference-based approach, a flat list is maintained using hierarchical identities. The reference-based approach is generally preferred because there is no arbitrary limitation set in the solution. 7. Mapping Patterns 7.1. UML Recursion TBD 7.2. UML Conditional Pacs May use the "presence" property of the container statement? Mansfield, et al. Expires January 4, 2016 [Page 16] Internet-Draft Guidelines UML to YANG July 2015 Figure 16: Mapping of Conditional Packages (Available in PDF or HTML versions) 7.3. XOR Relationship Use the "choice" property of the container statement. 8. Mapping Basics 8.1. UML-YANG or XMI-YANG Figure 17: Example UML to YANG Mapping (Available in PDF or HTML versions) Figure 18: Example XMI (Papyrus) to YANG Mapping (Available in PDF or HTML versions) 8.2. XMI Differences Figure 19: Example XMI (Papyrus) / XMI (RSA) Differences (Available in PDF or HTML versions) Figure 20: Example XMI (Papyrus) / XMI (RSA) Differences (detailed) (Available in PDF or HTML versions) 9. Acknowledgements 10. IANA Considerations This memo includes no request to IANA. 11. Security Considerations This document defines defines guidelines for translation of data modeled with UML to YANG. As such, it doesn't contribute any new security issues beyond those discussed in Sec. 16 of RFC6020 [2]. 12. References 12.1. Normative References [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. Mansfield, et al. Expires January 4, 2016 [Page 17] Internet-Draft Guidelines UML to YANG July 2015 12.2. Informative References [2] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, October 2010. [3] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", draft-ietf- netmod-rfc6020bis-05 (work in progress), May 2015. [4] Galimberti, G., Kunze, R., Lam, H., Hiremagalur, D., Grammel, G., Fang, L., and G. Ratterree, "A YANG model to manage the optical interface parameters of "G.698.2 single channel" in DWDM applications", draft-dharini-netmod- g-698-2-yang-03 (work in progress), March 2015. [5] Lam, H., Varma, E., Doolan, P., Davis, N., Zeuner, B., Betts, M., Busi, I., and S. Mansfield, "Usage of IM for network topology to support TE Topology YANG Module Development", draft-lam-teas-usage-info-model-net- topology-00 (work in progress), March 2015. [6] OMG, "Unified Modeling Language (UML)", 2011, . [7] OMG, "ONF TR-514 v1.0 UML Modeling Guidelines", 2015, . Appendix A. Example The YANG data schema (in tree format) shown below was extracted from dharini-netmod-g-698-2-yang [4] and represents the same data as UML model appearing in Figure 23 after the tree format. Note: The color code used in the tree format corresponds to the color code used in the UML class diagram. Figure 21: Interfaces Tree (Available in PDF or HTML versions) Figure 22: Notifications Tree (Available in PDF or HTML versions) Figure 23: Interfaces UML Model (Available in PDF or HTML versions) Mansfield, et al. Expires January 4, 2016 [Page 18] Internet-Draft Guidelines UML to YANG July 2015 Authors' Addresses Scott Mansfield (editor) Ericsson Inc. USA Phone: +1 724 931 9316 Email: scott.mansfield@ericsson.com Bernd Zeuner Deutsche Telekom AG Heinrich-Hertz-Str, 3-7 Darmstadt 64295 Germany Phone: +49 6151 58-12086 Email: b.zeuner@telekom.de Nigel Davis Ciena United Kingdom Email: ndavis@ciena.com Yun Xiang Fiberhome China Email: yunxig@fiberhome.com.cn Yuji Tochio Fujitsu Japan Email: tochio@jp.fujitsu.com Hing-Kam Lam Alcatel Lucent USA Phone: +1 732 331 3476 Email: kam.lam@alcatel-lucent.com Mansfield, et al. Expires January 4, 2016 [Page 19] Internet-Draft Guidelines UML to YANG July 2015 Eve Varma Alcatel Lucent USA Email: eve.varma@alcatel-lucent.com Mansfield, et al. Expires January 4, 2016 [Page 20]