Internet Engineering Task Force D. Lanz Internet-Draft L. Novikov Intended status: Informational MITRE Expires: January 8, 2011 July 7, 2010 Common Interface to Cryptographic Modules draft-lanz-cicm-01 Abstract This memo presents a programming interface to standardize the way software programs manage cryptographic modules and utilize cryptographic services offered by modules. Although a number of interfaces for commercial environments have been standardized and are in use, this is the first generic cryptographic interface to be developed that supports cryptographic modules separating two security domains and is thus ideal for the high assurance marketplace. The interface has been designed to also allow less demanding environments to take advantage of its features. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on January 8, 2011. Copyright Notice Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. Lanz & Novikov Expires January 8, 2011 [Page 1] Internet-Draft CICM July 2010 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Background . . . . . . . . . . . . . . . . . . . . . . . 4 1.2. Audience . . . . . . . . . . . . . . . . . . . . . . . . 6 1.3. Scope of the Specification . . . . . . . . . . . . . . . 6 1.4. Use Cases . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4.1. Data-in-Transit . . . . . . . . . . . . . . . . . . . 7 1.4.2. Data-at-Rest . . . . . . . . . . . . . . . . . . . . 8 1.4.3. Single Security Domain . . . . . . . . . . . . . . . 8 1.5. Assumptions . . . . . . . . . . . . . . . . . . . . . . . 9 1.6. Specification Organization . . . . . . . . . . . . . . . 9 1.7. Acknowledgements . . . . . . . . . . . . . . . . . . . . 10 2. Using the Specification . . . . . . . . . . . . . . . . . . . 11 2.1. Specification Categories . . . . . . . . . . . . . . . . 11 2.2. Module Management . . . . . . . . . . . . . . . . . . . . 11 2.2.1. Managing Module Authentication . . . . . . . . . . . 12 2.2.2. Managing Software Packages . . . . . . . . . . . . . 13 2.2.3. Managing Logs . . . . . . . . . . . . . . . . . . . . 13 2.2.4. Managing Tests . . . . . . . . . . . . . . . . . . . 13 2.2.5. Managing Module Events . . . . . . . . . . . . . . . 13 2.2.6. Managing Keys and Channels . . . . . . . . . . . . . 14 2.3. Key Management . . . . . . . . . . . . . . . . . . . . . 14 2.3.1. Creating and Establishing Keys . . . . . . . . . . . 15 2.3.2. Exporting Keys . . . . . . . . . . . . . . . . . . . 16 2.3.3. Channel Management . . . . . . . . . . . . . . . . . 16 3. Normative Specification . . . . . . . . . . . . . . . . . . . 25 3.1. Introduction . . . . . . . . . . . . . . . . . . . . . . 26 3.1.1. Conventions . . . . . . . . . . . . . . . . . . . . . 26 3.1.2. Normative Statements . . . . . . . . . . . . . . . . 26 3.2. Fundamental Definitions . . . . . . . . . . . . . . . . . 27 3.2.1. Namespace CICM . . . . . . . . . . . . . . . . . . . 27 3.2.2. Fundamental Types . . . . . . . . . . . . . . . . . . 27 3.2.3. Fundamental Interfaces . . . . . . . . . . . . . . . 32 3.3. Module Management . . . . . . . . . . . . . . . . . . . . 38 3.3.1. Managing Hardware Access Tokens . . . . . . . . . . . 38 3.3.2. Managing Users . . . . . . . . . . . . . . . . . . . 44 Lanz & Novikov Expires January 8, 2011 [Page 2] Internet-Draft CICM July 2010 3.3.3. Managing Login . . . . . . . . . . . . . . . . . . . 50 3.3.4. Managing Software Packages . . . . . . . . . . . . . 53 3.3.5. Managing Logs . . . . . . . . . . . . . . . . . . . . 61 3.3.6. Managing Tests . . . . . . . . . . . . . . . . . . . 64 3.3.7. Managing Module Events . . . . . . . . . . . . . . . 67 3.4. Key Management . . . . . . . . . . . . . . . . . . . . . 73 3.4.1. General Key Concepts . . . . . . . . . . . . . . . . 73 3.4.2. Asymmetric Keys . . . . . . . . . . . . . . . . . . . 80 3.4.3. Symmetric Keys . . . . . . . . . . . . . . . . . . . 93 3.4.4. Key Protocol . . . . . . . . . . . . . . . . . . . . 108 3.5. Channel Management . . . . . . . . . . . . . . . . . . . 123 3.5.1. Channel Abstractions . . . . . . . . . . . . . . . . 123 3.5.2. Conduit Abstractions . . . . . . . . . . . . . . . . 126 3.5.3. Stream Abstractions . . . . . . . . . . . . . . . . . 130 3.5.4. Controller Abstractions . . . . . . . . . . . . . . . 131 3.5.5. Channel Negotiation . . . . . . . . . . . . . . . . . 142 3.5.6. Encryption Channel Management . . . . . . . . . . . . 145 3.5.7. Decryption Channel Management . . . . . . . . . . . . 164 3.5.8. Duplex Channel Management . . . . . . . . . . . . . . 184 3.5.9. Bypass (Send) Channel Managment . . . . . . . . . . . 192 3.5.10. Bypass (Read) Channel Management . . . . . . . . . . 197 3.5.11. Encryption with Selective Bypass Channel Management . 202 3.5.12. Decryption with Selective Bypass Channel Management . 210 3.5.13. Random, Pseudorandom and Keystream Channel Management . . . . . . . . . . . . . . . . . . . . . 219 3.5.14. Integrity Channel Management . . . . . . . . . . . . 228 3.5.15. Single-Domain Channel Management . . . . . . . . . . 236 3.5.16. Channel Event Management . . . . . . . . . . . . . . 246 3.5.17. Channel Groups . . . . . . . . . . . . . . . . . . . 249 4. Conformance and Extensions . . . . . . . . . . . . . . . . . 250 4.1. Conformance . . . . . . . . . . . . . . . . . . . . . . . 250 4.1.1. Implementation Conformance Statement Contents . . . . 252 4.1.2. Implementation Data Specification Contents . . . . . 253 4.1.3. Generating Unique Identifiers . . . . . . . . . . . . 254 4.1.4. Conformance Verification . . . . . . . . . . . . . . 256 4.2. Extensions . . . . . . . . . . . . . . . . . . . . . . . 256 4.2.1. Extending an Interface . . . . . . . . . . . . . . . 256 4.2.2. Extending Codes . . . . . . . . . . . . . . . . . . . 256 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 258 6. Security Considerations . . . . . . . . . . . . . . . . . . . 258 7. Normative References . . . . . . . . . . . . . . . . . . . . 258 Appendix A. Status Codes . . . . . . . . . . . . . . . . . . . . 258 Appendix B. Terms . . . . . . . . . . . . . . . . . . . . . . . 270 Appendix C. IDL Definitions . . . . . . . . . . . . . . . . . . 278 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 315 Lanz & Novikov Expires January 8, 2011 [Page 3] Internet-Draft CICM July 2010 1. Introduction 1.1. Background Sensitive data is increasingly under attack, whether in transit or at rest. The computer security community has responded to these threats by using cryptography to secure sensitive data. To counter the growing number and types of threats against systems processing sensitive data, module vendors have engineered a diverse set of cryptographic modules. Systems that require cryptographic protection may utilize various cryptographic services including data encryption, signature generation, hashing, and keystream generation. Cryptographic modules providing these services and the key material they hold must be managed. All of these services have proprietary interfaces that differ significantly among module types, leading to the following problems: o Replacement of one module type for another and reuse of module- dependent software are inhibited as applications require extensive modifications to adapt to new module types and their proprietary interfaces. o Developers of systems that host cryptographic modules must accommodate different cryptographic module interfaces for different types of cryptographic modules. o Test tools and procedures developed for one module usually will not work with other modules. o Security evaluators must learn multiple module developers' interfaces, increasing evaluation time and expense. To address these problems, the Common Interface to Cryptographic Modules (CICM) specification offers module developers a set of standard interfaces for the set of operations supported by high assurance cryptographic modules. Although many Application Programming Interfaces (APIs) intended for commercial cryptography are available, the CICM specification was designed for high assurance environments, but may be used in other environments as well. Modules do not require changes to support the use of CICM. A module- specific abstraction layer between the library implementing CICM interfaces and the module performs the needed translations between the CICM model of a module and the model presented by a specific module. This abstraction component may be provided by the module developer, a module embedder/integrator, or another interested party. Lanz & Novikov Expires January 8, 2011 [Page 4] Internet-Draft CICM July 2010 This arrangement is analogous to manufacturers of computer peripheral devices providing platform or operating system-specific drivers for their peripheral devices. CICM is defined using Interface Definition Language (IDL), a specification language that describes a software interface in a language-neutral way. IDL compilers can generate a functionally equivalent CICM interface binding for common programming languages. The use of IDL in CICM is not intended to either prescribe or preclude a particular communications protocol such as General Inter- ORB Protocol (GIOP) between programs in different address spaces or on different devices. Software developers who require the services of cryptographic modules to perform cryptographic operations use a CICM library in their desired language binding for the specific module from which they intend to access cryptographic services. The specification currently does not specify normative bindings for specific programming languages, although bindings for common languages can be generated from the IDL provided with the specification. However, normative bindings for one or more popular programming languages will be made available in a future release of the specification. The benefits of using the CICM standard interfaces to access cryptographic services include: o Provide a common, logical model of cryptographic modules that is straightforward to learn and easy to use. o Enable the replacement of one cryptographic module for another without significant modifications to the client programs that interact and use the cryptographic module, assuming certain compatibility characteristics between the modules exist. o Accommodate binding to multiple programming languages. o Enforce the correct use of the API; in particular, interfaces must be used in the intended order, imposable at compile time or recognizable via static analysis. o Support high assurance evaluation by enabling evaluators to quickly validate that a particular implementation uses only the required functions in the manner they were intended. Lanz & Novikov Expires January 8, 2011 [Page 5] Internet-Draft CICM July 2010 1.2. Audience The CICM specification is written for computer programmers, software engineers, and technical architects with a background in data security and cryptography. Knowledge of object-oriented programming concepts is useful when reading IDL definitions. Software engineers may use the specification when developing software that integrates with cryptographic modules. Technical architects may use the specification when designing systems that incorporate cryptographic modules to secure data within the system or between systems. Although the specification is targeted to software developers who will access module services using a compliant implementation, it also addresses module developers and others who implement library and other support software. 1.3. Scope of the Specification CICM interfaces provide a common way to access the following services offered by cryptographic modules: o Cryptographic module management: Includes retrieving information about a specific module, managing access control, managing module events, and loading and managing software packages on modules. o Key management: Includes the generation, storage, protection, and removal of key material, and support for message exchanges used in key agreement and key transfer protocols. o Channel management: A channel defines a specific cryptographic transform and encapsulates all attributes associated with that transform. Channel management includes channel instantiation, channel control throughout its lifetime, providing data to a channel for transformation, and extracting transformed data from a channel. Each of the above services is discussed in detail in Section 2 of the specification and is introduced normatively in Section 3. The following elements are not addressed by the specification: o Hardware interfaces, protocols, or design o Details of specific protocols in the specification (The specification provides a means to move protocol messages into and out of a module, but does not dictate low level protocol.) Lanz & Novikov Expires January 8, 2011 [Page 6] Internet-Draft CICM July 2010 o Internal structure of certain types of data elements (e.g., software packages imported into a module, test results extracted from a module) that move through CICM interfaces o Policy enforcement (The specification provides a means to convey policy elements to the module, but policy enforcement is considered a module responsibility.) o Organization of the information stored and processed within a module o Separation of commands/data for multiple security domains that access a single CICM library instance (e.g., Multiple Levels of Security). 1.4. Use Cases A significant characteristic that differentiates CICM from other cryptographic interfaces is its ability to support cryptographic modules that separate two security domains. The use cases that follow capture this fundamental element of CICM interface design. These use cases can be divided into two basic types: o Cryptographic transformation of data initiated in one security domain with the result made available in another security domain o Cryptographic transformation of data within a single security domain: Cryptographic hash or digital signature operations may be initiated in the same security domain where the result is received. Other single domain use cases include data encryption/ decryption for storage and keystream/random data generation. The data-in-transit and data-at-rest use cases illustrated below incorporate multiple security domains, while the final use case depicts a transformation within a single domain. 1.4.1. Data-in-Transit The figure below shows a hardware device with an embedded cryptographic module providing encryption and decryption services between a secure and non-secure network. The secure side protocol logic subsystems access cryptographic services using CICM. In this use case, the High Assurance IP Encryptor (HAIPE) device utilizes CICM to enable the internal protocol logic of the device to access cryptographic services; the network to which the HAIPE device is connected does not interface to the protocol encryptor using CICM. {FIGURE REMOVED} Lanz & Novikov Expires January 8, 2011 [Page 7] Internet-Draft CICM July 2010 Figure 1. First Data-in-Transit Use Case, HAIPE The following figure depicts the same use case in its end-to-end configuration. {FIGURE REMOVED} Figure 2. HAIPE Use Case in End-to-End Configuration A second data-in-transit use case shows a tactical secure radio with an embedded cryptographic module providing encryption and decryption services between a local host and a radio frequency environment. The functional blocks that make up the tactical secure radio are logically identical to those in the first example. {FIGURE REMOVED} Figure 3. Second Data-in-Transit Use Case, Tactical Secure Radio 1.4.2. Data-at-Rest The figure below shows a cryptographic module providing encryption services for data stored on a disk and decryption services for data read from a disk. A file system driver accesses cryptographic services using CICM standard interfaces. This use case could apply to a laptop computer that contains encrypted data; it would prevent access to sensitive data from a lost or stolen laptop. {FIGURE REMOVED} Figure 4. Data-at-Rest Use Case 1.4.3. Single Security Domain The following figure shows a cryptographic transform within a single security domain (it assumes that the transform does not change the classification of the data). The plaintext is conveyed to the module, transformed by an encryption algorithm, and results in ciphertext. This information is then returned to the same domain from which the plaintext originated. Other natural examples of a single domain use case include signing, which results in a digital signature; hashing, which results in a hash value; and keystream generation, which results in keystream data. {FIGURE REMOVED} Figure 5. Single Security Domain Use Case Lanz & Novikov Expires January 8, 2011 [Page 8] Internet-Draft CICM July 2010 1.5. Assumptions The following assumptions were made in the development of CICM: o Library implementers may implement part of the specification (refer to Section 4, Conformance and Extensions, for the normative rules). o A client program initiates cryptographic transformations with a cryptographic module via the CICM API. Multiple client programs may concurrently access a single module from a single security domain, but CICM provides no support for controlling access to a module by two or more client programs. o A module may be implemented as hardware, firmware, or software component, or any combination thereof. o Although CICM is intended for use in high assurance environments, its use is not precluded in less demanding environments. o One or more entities between the API library and the module translates CICM commands or interfaces to module-specific commands or interfaces. o CICM makes no provision in the design of the API to guarantee the confidentiality, integrity, or authenticity of commands and data between a client program calling the API and a module. However, such protections can be applied in the library or runtime system software. o Specialized hardware (e.g., hardware access tokens, key fill devices, trusted displays) independent of a module may require host (and thus API) interaction or may require no host interaction. 1.6. Specification Organization This specification contains normative and informative (non-normative) material. The normative material is prescriptive and provides information that is necessary to claim conformance to the specification. The informative material is for informational purposes; it assists the reader in the understanding and use of the specification but does not contain provisions required for conformance. Section 1 and Section 2 provide introductory material and are non- normative. Section 3 presents the namespaces, interfaces, methods, and attributes that comprise the specification, and is normative. Lanz & Novikov Expires January 8, 2011 [Page 9] Internet-Draft CICM July 2010 Section 4, Conformance and Extensions, provides the specification conformance statement and is normative. Appendix A lists the status codes referred to within the document and is normative. Appendix B lists the terms used within the document and is non-normative. 1.7. Acknowledgements Many individuals participated in the development and review of the CICM specification. The CICM development team consists of Ronald Albuquerque, Samuel Cardman, Greg Carrier, James Cottrell, Shirley Kawamoto, Daniel Lanz, Brent Midwood, Lev Novikov, Brian O'Hanlon, Rick Page, Adam Pennington, and Nguyen Thai. The document production team consists of Mark Dwyer, Amanda Lind, and Brian Parrish. The CICM team wishes to thank the following individuals for participating in a review of the specification: Bill Beckwith, Objective Interface Systems Dennis Bourget, Viasat Thom Brooke, Linquest Corp. Randy Culver, RT Logic John Davis, ITT Corporation Eric Dube, The MITRE Corporation Jan Duffy, Rockwell Collins H.J. Eckles, General Dynamics Mark Flinchbaugh, Harris Corp. Carolyn Francisco, The MITRE Corporation James Howard, L-3 Communications Kent Kofstad, The MITRE Corporation Hema Krishnamurthy, ITT Corporation Prithvi Kumar, The MITRE Corporation Chip McGrogan, L-3 Communications Lanz & Novikov Expires January 8, 2011 [Page 10] Internet-Draft CICM July 2010 Hank Morris, Concurrent Technologies Corp. Jeff Picciotto, The MITRE Corporation Tom Plachecki, General Dynamics Ray Purvis, The MITRE Corporation Mike Ridge, The MITRE Corporation Harry Shaffer, The MITRE Corporation Patrick Smith, Linquest Corp. Wayne Staats, Rockwell Collins James Steinwachs, Harris Corp. Porter Taylor, The MITRE Corporation Otaway Thomas, Arkham Technology Bob Walcott, The MITRE Corporation Blane Yamamoto, SafeNet Mykotronx 2. Using the Specification 2.1. Specification Categories CICM interfaces are divided into three major categories: o Module management o Key management o Channel management This section describes CICM support for capabilities made available by cryptographic modules to systems that depend upon high assurance cryptography. 2.2. Module Management CICM's most fundamental element and its technique for abstracting modules is the CryptoModule interface. This interface provides the means to manage individual modules, and to access channel and key Lanz & Novikov Expires January 8, 2011 [Page 11] Internet-Draft CICM July 2010 interfaces. Individual CryptoModule instances are accessible from the CICMRoot interface, enabling a single CICM library instance to provide access to multiple cryptographic modules available from a particular host. The CryptoModule interface defines attributes that enable a caller to retrieve information about a module, including the module manufacturer, serial number, and version numbers. This interface also defines specialized attributes called managers that provide access to the services made available by the module. CryptoModule supports the managers described in the sections below. 2.2.1. Managing Module Authentication Modules may require a host or user to authenticate to the module before the module will enter an operational state, allowing it to accept commands and perform cryptographic transformations. In some cases, a specialized, removable hardware component will perform or participate in the authentication. This hardware component is termed a hardware access token in CICM nomenclature, although other communities may use different terminology. Most implementations utilizing hardware access tokens will transfer key material between the token and module, independent of the API. In cases where access tokens are not supported, a user may provide authentication credentials to the module via the API. In still other cases, support for multi-factor authentication will require a token and a user login. Note that the user and token holder may be different entities. CICM provides interfaces that can be used separately or in combination with one another as appropriate for the system using them and for the authentication mechanisms offered by the module that is utilized by the system. Methods to manage module/token associations are available for systems where hardware access tokens are supported. Login methods and related user management methods are supported for systems that require user login. The managers below support the functionality described above. 2.2.1.1. Managing Hardware Access Tokens The token manager defines methods that support associating a token with a module, disassociating a token from a module, and disassociating a module from a token. The manager also supports retrieving a list of token associations on a module and module associations on a token. Lanz & Novikov Expires January 8, 2011 [Page 12] Internet-Draft CICM July 2010 2.2.1.2. Managing Users The user manager defines methods that support adding users to and removing users from a module user database, and associating a user with a module-defined role. The manager also supports listing the user database, and the roles defined and supported by the module. 2.2.1.3. Logging in to a Module from a Host The login manager defines methods that enable a user configured on a module to login to and logout from a module. 2.2.2. Managing Software Packages The package manager defines methods that support importing and managing the executable images that reside on a cryptographic module. These methods enable module software/firmware packages to be imported and other software package management operations to be performed, including retrieving a list of packages, and activating or deleting a specific package. The package manager enables packages to be imported into a module in segments rather as an atomic unit. This supports modules that must make special provisions to import executable images due to internal storage space limitations. 2.2.3. Managing Logs Modules generate log entries as they operate. The log manager defines methods that support retrieving individual log entries or extracting an entire log from a module. Additionally, clients may clear individual log entries or the entire module log. 2.2.4. Managing Tests Modules may incorporate built-in tests to validate that module functionality is operating as designed. Some tests may be externally initiated. The test manager defines methods that support host- initiated module tests. 2.2.5. Managing Module Events The event manager defines methods that support registering/ unregistering module-generated event notifications received by a client program. Clients can register custom-developed callback procedures, called listeners , for specific module events. When the condition associated with a specific listener presents itself, the registered listener is called. Lanz & Novikov Expires January 8, 2011 [Page 13] Internet-Draft CICM July 2010 Examples of events for which listeners may be registered include: o Hardware access token has been inserted or removed. o Module is ready to receive traffic. o Alarm condition is raised. o Hardware zeroization condition raised. o Continuous module/engine health test failed. o Usable lifespan of key expired. o Change in module power state. 2.2.6. Managing Keys and Channels Channel and key management interfaces are made available via managers in the CryptoModule interface. The asymmetric and symmetric key manager attributes allow for access to asymmetric keysets and symmetric keys, respectively, and the key database manager offers the ability to zeroize a module and reencrypt the module key database. The channel manager attribute allows channels to be created and used. 2.3. Key Management Cryptographic modules utilize key material under their protection as one input to perform a cryptographic transformation. Keys o can originate at a Key Infrastructure Component that has a trust relationship with the module o may be agreed upon between the module and another entity o may be generated on the module itself o may be derived from information presented to the module by a client program. Once established on a module, they may be subject to client-initiated management operations or may be used as part of a cryptographic channel to effect cryptographic transformations. CICM supports separate IDL interfaces for symmetric keys and asymmetric keysets. An asymmetric keyset may comprise an asymmetric key pair, the public and private key components of a keypair, the digital certificate corresponding to the keyset public key, one or more verification certificates in the certificate chain of trust, and Lanz & Novikov Expires January 8, 2011 [Page 14] Internet-Draft CICM July 2010 related public domain parameters. The asymmetric and symmetric key manager attributes allow for access to asymmetric keysets and symmetric keys, respectively. 2.3.1. Creating and Establishing Keys Keys may be moved into a module in one of several scenarios. Each scenario is described in detail below. 2.3.1.1. No Host Interaction Key Fill Specialized hardware devices designed to transfer key from a key infrastructure component to a specific cryptographic module may fill key into a module without host involvement and thus no API interaction. In some cases, this process does not support transferring key metadata with a key. This requires host and API interaction to apply metadata to the key inside the module upon completion of the fill. 2.3.1.2. Client Program-Initiated In some cases, key fill devices require host interaction to initiate a key fill. The API enables a key storage location to be specified or key tagging information to be associated with the filled key prior to the initiation of the fill. Keys may be imported via the key import method or derived using a text-based secret provided by the user of the client program. Keys also may be generated directly on the module. Each case results in a persistent key. A key also is implicitly established each time a channel is created using an asymmetric keyset and upon renegotiation. Keys resulting from channel-based key agreement are ephemeral; they are not generally managed outside of a channel. Ephemeral keys also may be destroyed when a channel is destroyed. 2.3.1.3. Module/Key Infrastructure Initiated A facility to operate a key agreement protocol with an infrastructure component is supported. This facility also enables key material or key revocation information to be authenticated by one of the module's trust anchors, and then loaded into the module. Lanz & Novikov Expires January 8, 2011 [Page 15] Internet-Draft CICM July 2010 2.3.2. Exporting Keys Methods to export key material out of a module are supported. A module may require wrapping the key material prior to export or may disallow this operation. 2.3.2.1. Locating and Retrieving Information about a Key A method to locate a specific key on a module based upon identification information associated with the key is supported. In addition, the entire key database may be listed. 2.3.2.2. Applying Metadata to Keys Key metadata may be retrieved and set for individual keys. Metadata elements include the key identifier, alias, and classification. Keys, imported via a fill device, that are untagged may require certain metadata to be applied after the conclusion of the load. 2.3.2.3. Performing Operations on Keys A number of management operations on keys are supported. Keys may be wrapped (cryptographically protected) in preparation for export, or may be unwrapped after import. Keys may be zeroized, either individually or as the set of all key material on the module. Specialized operations to perform key conversions and updates also are available. 2.3.2.4. Enabling Remote Management The specification enables support for various key management-related protocol messages including remote key functions (e.g., remote zeroize or rekey), infrastructure-initiated key revocation, and trust anchor management. 2.3.3. Channel Management The CICM channel is the fundamental construct under which one or more related cryptographic transforms are performed, and within which all details and attributes associated with the transform are encapsulated, including the path through the module. Most channels accept data from a port in the local security domain, transform the data, and output the result on a port in another security domain. A channel also may perform transformations within a single security domain, or may accept data for transformation in one domain and output the result in another. The channel type determines which ports must be specified when a channel is created. Lanz & Novikov Expires January 8, 2011 [Page 16] Internet-Draft CICM July 2010 {FIGURE REMOVED} Figure 6. Local and Remote Port Nomenclature for Channels that Operate in Two Security Domains Three classes of objects are fundamental to the creation and use of CICM channels. A controller is used to configure and control a channel. A stream enables data to be sent to a module to be transformed, and transformed data to be received using a controller as a foundation. A conduit is the sum of a controller and a stream. Thus, the term channel is only an abstraction representing the logical path through the module on which cryptographic transformations are performed. {FIGURE REMOVED} Figure 7. Relationship Between Channel, Conduit, Controller, and Stream This division of responsibility makes channels very flexible. One client program can be responsible for creating and managing channels with a controller, and another can send data over this preconfigured channel for transformation using a stream. In some environments, data to be transformed never enters the host to pass through the API. Instead, it is clocked directly through the module. In this situation, a controller is configured, but no stream is configured since it would never be used. In other cases, a client program is required to configure the channel and pass data through the channel it configured. In this case, the client program configures a conduit, which incorporates a controller and a stream. Both controllers and conduits accept symmetric keys, requiring that the client program configuring the channel and its remote peer share the same secret key. Alternatively, all peers may hold their own respective asymmetric keysets, requiring a key negotiation which, upon successful completion, results in each peer holding an ephemeral symmetric key. CICM supports a negotiator IDL interface for this purpose. A successful negotiation results in a negotiated controller or conduit. CICM supports the following channel types: o Encryption/decryption, including selective bypass o Signature generation/verification o Message Authentication Code (MAC) generation/verification Lanz & Novikov Expires January 8, 2011 [Page 17] Internet-Draft CICM July 2010 o Cryptographic hashing o Keystream generation o Random/pseudo-random data generation o Key wrap o Full bypass. CICM also supports hybrid channel types. A channel that simultaneously supports encryption and signature, resulting in both ciphertext and a final signature value, is a hybrid channel. Each of the types above differs in the way it is configured, its configuration options, and how it handles the cryptographic transformation of data. Consider the following examples portraying the diversity of the channel types: o The encryption channel accepts plaintext to be transformed, and can return the resulting ciphertext directly to the caller or route it a different security domain o The random data generation channel requires no data for transformation, but emits a random stream o The signature channel accepts an indeterminate amount of data, and returns an algorithm-specific fixed-sized value o The hashing channel does not accept a cryptographic key as a parameter, as most of the other channel types do (keyed hashes are supported by MAC channels) o The decryption channel accepts a state vector input parameter, but does not allow a state vector to be generated. This diversity results from the fundamental characteristics of the cryptographic primitives that are being abstracted. The channel manager defines the methods that support creating conduits, controllers, streams, and negotiators for each of the channel services listed above. Interfaces for channel services are organized into 10 namespaces for modularity and as a mechanism to group similar channel types together. A namespace is an abstract container that holds related interfaces. The CICM channel manager provides the ability to perform the Lanz & Novikov Expires January 8, 2011 [Page 18] Internet-Draft CICM July 2010 functions described in the following sections. 2.3.3.1. Creating Channels Creating a channel requires an awareness of the options available: o The type of cryptographic operation desired (encryption, hashing, keystream generation, etc.) o How the channel will be used (control-only, send/receive data only, or both control and send/receive data) o The type of key that will be used for channels that require a symmetric key or an asymmetric keyset (hybrid channels accept two keys). Selecting among these options enables the client program developer to determine what channel interface to use. Consider the following example of a client program configuring a channel to perform encryption using an asymmetric keyset: o The desired cryptographic operation is "encryption." o The program only needs to control the channel, not send data over the channel to be encrypted. o An asymmetric keyset is available, requiring a key agreement protocol negotiation before the channel will be usable. Given the above information, creating the appropriate type of negotiator from the ChannelManager is straightforward: // Assume references to cryptoModule, localPort, remotePort, protocol, // and key. CICM::Status sCode; // Retrieve a reference to the ChannelManager: CICM::ChannelManager channelManager = cryptoModule._get_channel_manager(); // Create the appropriate Negotiator: CICM::Encrypt::ControllerNegotiator negotiator; sCode = channelManager.negotiate_encrypt_controller(localPort, remotePort, protocol, key, &negotiator); The above call results in the initiation of a key agreement protocol negotiation with its remote peer. To ensure that it is the expected Lanz & Novikov Expires January 8, 2011 [Page 19] Internet-Draft CICM July 2010 peer, a human user at the client may validate information extracted from the peer's certificate. If the module uses a trusted display, it directly communicates the peer information to the display. Based upon user input at the display, host-independent negotiation is continued or aborted. If no trusted display is available, the client program requests information about the remote peer, displays it at the host for user confirmation, and provides positive confirmation via the API that the peer is valid, allowing the negotiation to continue. The following example shows the display interactions required to retrieve a negotiated controller: // Retrieve peer information: CICM::PeerInfo peerInfo; negotiator.get_remote_info(&peerInfo); // Assume the user positively confirms that the peer is valid. // Complete the negotiation. CICM::Encrypt::NegotiatedController negotiatedController; sCode = negotiator.complete(&negotiatedController); The resulting negotiated controller can be used to control and manage the channel. The sections below describe the channel types that are supported. 2.3.3.1.1. Encryption and Decryption CICM defines interfaces to support encryption and decryption between two security domains or within a single security domain. Additional variants are defined including hybrid channels that can concurrently compute integrity values. Another set of variants provides methods to perform encryption/decryption with selective bypass. If an asymmetric keyset is used to create a channel, a negotiation process is initiated, which results in a negotiated channel. Negotiated versions of hybrid channels also are available. For those negotiator versions that combine encryption with integrity value generation, negotiation applies only to the encryption key specified when the channel is negotiated, not the signature or MAC key. Channel-based multiple key wrap/unwrap support is provided via a special channels for that purpose. CICM also supports encryption/decryption channels that operate in coprocessor mode . These channels accept their input and return their output as part of the same method call. Where relevant, the Lanz & Novikov Expires January 8, 2011 [Page 20] Internet-Draft CICM July 2010 integrity value or verification status (verified/not verified) is returned when the final block of the input has been presented for transformation. Duplex channel configurations that use the same key to perform encrypt and decrypt transformations also are supported. Negotiated versions of the duplex channel also are available. 2.3.3.1.2. Bypass Bypass channels capable of defining a path through a module and then bypassing data from one security domain to a different domain are supported. Selective bypass also is supported on encryption and decryption channels. 2.3.3.1.3. Integrity Interfaces to compute and validate integrity values using asymmetric key-derived digital signatures or symmetric key-derived MACs are available. A variant on the sign and verify interfaces accepts a previously generated hash value in place of a message. 2.3.3.1.4. Hashing A channel to calculate a fixed-length cryptographic hash from an input message is available. Keyed hashes are supported by MAC channels. 2.3.3.1.5. Keystream Generation Channels are supported to read keystream from a module. 2.3.3.1.6. Random Data Separate interfaces are defined to retrieve random or pseudorandom data from a module. 2.3.3.2. Managing Channels Only conduits and controllers (not streams) can manage channels. Negotiators also can manage the negotiation aspects of a channel. The management operations that can be performed on a channel are specific to each channel type, but the following general operations are supported: o Generating, extracting, and setting state vectors Lanz & Novikov Expires January 8, 2011 [Page 21] Internet-Draft CICM July 2010 o Resynchronization o Initiating a key rollover o Initiating a key update. Negotiators support the following general operations: o Renegotiation o Changing classification level/acknowledging change of classification level. Managing state vectors is an important channel management capability. CICM provides a method to explicitly generate a state vector for those algorithms/modes that require a random initialization vector (IV), although modules may alternatively generate an IV as a byproduct of channel creation. CICM also provides a method to set the state vector on a channel. This may be used to: o Set the decrypt channel to the IV generated/used on the encrypt side of a channel. o Provide a vector on a block-by-block basis for appropriate algorithms/modes or at each time epoch (e.g., time-of-day encryption). In addition, a method is available to take a special state vector called a synchronization vector to assist in resynchronizing a channel. 2.3.3.3. Using Channels Only conduits and streams (not controllers) can send data for transformation and receive cryptographically transformed data on a channel. The data operations that can be performed on a channel or stream are specific to each channel type, but the following general operations are supported: o Sending data on a channel to initiate a cryptographic transformation: * Blocking send: Call does not return until data has been sent or the operation times out. * Non-blocking send: Call queues data for sending and returns immediately to the caller. Lanz & Novikov Expires January 8, 2011 [Page 22] Internet-Draft CICM July 2010 * Poll: Determines status of non-blocking send operation. o Receiving transformed data from a channel: * Blocking read: Blocks until data becomes available or the operation times out. * Non-blocking read: Call queues a buffer to receive data and returns immediately. * Poll: Determines status of non-blocking read operation. * Notification via callback that data has become available using a ChannelEventListener. Although it is possible for multiple client programs to use the same stream, the specification provides no facilities to coordinate the parties participating in the communication. Certain channel services support receiving an "answer" from a channel. For example, signature and hashing channels accept variable amounts of data for transformation before returning a final, constant-sized "answer" (a signature or a hash) to the caller. Composite channels require sending/receiving data and receiving a final "answer" after a discrete unit of data has been transformed. The figure below depicts the use of a hybrid channel. Plaintext is sent through the CICM API for transformation. The module performs encrypt and sign transformations on the plaintext data. Ciphertext resulting from the encrypt transform emits from the module in a different security domain than the one in which it originated. When it is finished presenting data for transformation, the client program requests the signature that results from the transaction via the API. {FIGURE REMOVED} Figure 8. Hybrid SignEncrypt Channel Operations Consider the following hybrid channel example where a client program configures a channel to simultaneously encrypt and sign data. The encryption operation utilizes a symmetric key, and the signature operation utilizes an asymmetric keyset. Cleartext is sent into the channel for transformation, and the resulting ciphertext emits in another security domain. When all data for transformation has been presented to the channel, the caller calls the associated "end" method to generate and retrieve the signature calculated over the plaintext. Lanz & Novikov Expires January 8, 2011 [Page 23] Internet-Draft CICM July 2010 // Assume references to cryptoModule, remotePort, // signKey, encryptKey, signAlgorithm, encryptAlgorithm, data_first, // and data_second. CICM::Status sCode; // Get the ChannelManager: CICM::ChannelManager channelManager = cryptoModule._get_channel_manager(); // Create the appropriate conduit. CICM::Encrypt::WithSignConduit conduit; sCode = channelManager.create_encrypt_with_sign_conduit(remotePort, signKey, encryptKey, signAlgorithm, encryptAlgorithm, &conduit); // Encrypt and sign some data. sCode = conduit.encrypt(data_first); sCode = conduit.encrypt(data_second); // Retrieve the signature. CICM::SigBuffer signature; sCode = conduit.end_get_signature(&signature); Each type of channel supports a specific set of channel data operations. Channel types and the data operations they support are listed below: o Encrypt, selective bypass with encryption, and full bypass write channels: Write data in the local security domain for transformation and output in another security domain. o Decrypt, selective bypass with decryption, and full bypass read channels: Read transformed data from one security domain into the local security domain. o Coprocessor channels: Data is presented for transformation and the result received within the same security domain. o Duplex channels: Read/write exchange between two security domains. o Keystream and random data generation: Transformation within module results in data stream that emits in the local domain. For example, channels for encryption and bypass can send data. Channels for decryption, bypass, keystream generation, and random data generation can receive data. Duplex and coprocessor channels can send and receive data. Lanz & Novikov Expires January 8, 2011 [Page 24] Internet-Draft CICM July 2010 2.3.3.4. Grouping Channels Controllers and conduits can be grouped to enable certain characteristics to be shared. One characteristic may be the state vector associated with the channels. This supports environments where two or more channels with related security rules supporting a single operation are used within a system. Whenever a shared characteristic is changed on a controller or conduit in a group, the effect of this change is applied to all controllers/conduits in the group. 2.3.3.5. Receiving Notification of Channel Events The specification defines methods that support managing module event notifications. Similar support is available at the granularity of an individual conduit/controller. Conduits and controllers define methods that support registering/unregistering channel-specific module-generated event notifications captured by a client program. Clients can register custom-developed callback procedures called listeners for specific channel events. When the condition associated with a specific listener presents itself, the registered listener is called. Examples of channel events for which listeners may be registered include: o Data is available. o Synchronization with peer has been lost. o Remote peer no longer available. o General channel error encountered. 2.3.3.6. Destroying Channels Conduits and controllers may be destroyed when their services are no longer needed. A channel is destroyed without regard for users who may have pending operations on the channel. Any ephemeral keys associated with the channel also may be destroyed. A stream ceases to function when its associated controller is destroyed. A destroyed channel is removed from any channel groups to which it belongs without effect upon other controllers/conduits in the group. 3. Normative Specification The namespaces, interfaces, datatypes, methods, and attributes that Lanz & Novikov Expires January 8, 2011 [Page 25] Internet-Draft CICM July 2010 comprise the specification are presented in a prescriptive manner. The conventions used within the section are presented first. The subsections that follow introduce the API partitioned into its three major categories: o Module management o Key management o Channel management. For each category, each namespace is described followed by the interfaces contained within it. The datatype, method, and attribute definitions then follow each interface definition. 3.1. Introduction 3.1.1. Conventions Understanding the design of the API and the IDL interfaces that compose CICM requires an understanding of the conventions used in this normative specification. The conventions used are introduced below. 3.1.1.1. Diagrams {SECTION REMOVED} 3.1.1.2. IDL Definitions Throughout this specification, normative definitions are presented using the following format: Method Cat::eat() void eat( in CatFood food ); Provides the cat with food. Parameters: [in] food Food for the cat. This same format is used to provide definitions for types, constants, attributes, interfaces, and namespaces. 3.1.2. Normative Statements A number of concerns fundamental to the remainder of the normative specification are listed below. Lanz & Novikov Expires January 8, 2011 [Page 26] Internet-Draft CICM July 2010 3.1.2.1. Endianness Endianness is the byte ordering used to represent data stored in a computer or transmitted between computers. CICM requires a big- endian ordering of bytes. 3.1.2.2. Blocking and Non-blocking Calls All CICM methods block (wait for the operation defined by the method) to complete before returning, unless they are explicitly defined as non-blocking. For example, the CICM::Encrypt::Stream::encrypt method blocks when sending data on a stream to be encrypted, while its sibling CICM::Encrypt::Stream::encrypt_non_blocking is identified not only in its name as non-blocking, but also clearly within the documentation for the method. 3.1.2.3. IDL Language Mapping Conventions Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. 3.2. Fundamental Definitions 3.2.1. Namespace CICM Namespace CICM module CICM CICM is the top-level namespace for all CICM interfaces and sub- namespaces. 3.2.2. Fundamental Types 3.2.2.1. General Types Type CICM::UInt32 typedef unsigned long UInt32; Unsigned 32-bit integer. Type CICM::Bool typedef boolean Bool; Boolean value. Type CICM::CharString typedef string CharString; Sequence of characters. Lanz & Novikov Expires January 8, 2011 [Page 27] Internet-Draft CICM July 2010 Type CICM::Buffer typedef sequence Buffer; Byte sequence, encapsulating the sequence of bytes, the length of the sequence, and the amount of allocated space. 3.2.2.2. Identifiers Type CICM::ModuleId typedef CICM::CharString ModuleId; Unique cryptographic module identifier. Type CICM::ModuleRecord typedef CICM::CharString ModuleRecord; Unique module association record. Type CICM::TokenRecord typedef CICM::CharString TokenRecord; Unique token association record. Type CICM::PackageId typedef CICM::CharString PackageId; Unique package identifier. Type CICM::UserId typedef CICM::CharString UserId; Unique user identifier. Type CICM::RoleId typedef CICM::CharString RoleId; Unique role identifier. Type CICM::KeyId typedef CICM::CharString KeyId; Unique key identifier. Type CICM::TransId typedef CICM::UInt32 TransId; Unique transaction identifier for read/write operations. 3.2.2.3. Status Codes Type CICM::Status typedef CICM::UInt32 Status; Status of an executed method. See also: Lanz & Novikov Expires January 8, 2011 [Page 28] Internet-Draft CICM July 2010 Appendix A for a full list of status codes. 3.2.2.4. Classifications Type CICM::Classification typedef CICM::UInt32 Classification; Classification levels. Constant CICM::C_LEVEL_UNCLASSIFIED const CICM::Classification C_LEVEL_UNCLASSIFIED = 0x0000602F; Value indicating unclassified classification level. Constant CICM::C_LEVEL_CONFIDENTIAL const CICM::Classification C_LEVEL_CONFIDENTIAL = 0x00006029; Value indicating confidential classification level. Constant CICM::C_LEVEL_SECRET const CICM::Classification C_LEVEL_SECRET = 0x0000602A; Value indicating secret classification level. Constant CICM::C_LEVEL_TOP_SECRET const CICM::Classification C_LEVEL_TOP_SECRET = 0x0000602C; Value indicating top secret classification level. 3.2.2.5. Algorithms Type CICM::HashAlgorithmId typedef CICM::CharString HashAlgorithmId; Unique hash algorithm identifier. Type CICM::AsymEncrAlgorithmId typedef CICM::CharString AsymEncrAlgorithmId; Unique asymmetric encryption algorithm identifier. Constant CICM::IMPLICIT_ASYM_ENCR_ALGO const CICM::AsymEncrAlgorithmId IMPLICIT_ASYM_ENCR_ALGO = "IMPLICIT"; Value that indicates that the encryption algorithm is implicit in the key being provided to the module. Lanz & Novikov Expires January 8, 2011 [Page 29] Internet-Draft CICM July 2010 Type CICM::AsymSigAlgorithmId typedef CICM::CharString AsymSigAlgorithmId; Unique asymmetric signature algorithm identifier. Constant CICM::IMPLICIT_ASYM_SIG_ALGO const CICM::AsymSigAlgorithmId IMPLICIT_ASYM_SIG_ALGO = "IMPLICIT"; Value that indicates that the signature algorithm is implicit in the key being provided to the module. Type CICM::KeyWrapAlgorithmId typedef CICM::CharString KeyWrapAlgorithmId; Unique key wrap algorithm identifier, incorporating both the algorithm and the mode. Constant CICM::IMPLICIT_KEY_WRAP_ALGO const CICM::KeyWrapAlgorithmId IMPLICIT_KEY_WRAP_ALGO = "IMPLICIT"; Value that indicates that the key wrap algorithm is implicit in the key being provided to the module. Type CICM::SymEncrAlgorithmId typedef CICM::CharString SymEncrAlgorithmId; Unique symmetric encryption algorithm identifier, incorporating both the algorithm and the mode. Constant CICM::IMPLICIT_SYM_ENCR_ALGO const CICM::SymEncrAlgorithmId IMPLICIT_SYM_ENCR_ALGO = "IMPLICIT"; Value that indicates that the encryption algorithm is implicit in the key being provided to the module. Type CICM::SymMacAlgorithmId typedef CICM::CharString SymMacAlgorithmId; Unique symmetric MAC algorithm identifier. Constant CICM::IMPLICIT_SYM_MAC_ALGO const CICM::SymMacAlgorithmId IMPLICIT_SYM_MAC_ALGO = "IMPLICIT"; Value that indicates that the MAC algorithm is implicit in the key being provided to the module. Lanz & Novikov Expires January 8, 2011 [Page 30] Internet-Draft CICM July 2010 Type CICM::ProtocolId typedef CICM::CharString ProtocolId; Unique key agreement protocol identifier. Constant CICM::IMPLICIT_PROTOCOL_ID const CICM::ProtocolId IMPLICIT_PROTOCOL_ID = "IMPLICIT"; Value that indicates that the key agreement protocol is implicit in the message being provided to the module. 3.2.2.6. Ports Type CICM::RemotePort typedef CICM::UInt32 RemotePort; Remote module port. Constant CICM::IMPLICIT_REMOTE_PORT const CICM::RemotePort IMPLICIT_REMOTE_PORT = 0xFFFFFF99; Value that indicates that the remote port value is implicit. Type CICM::LocalPort typedef CICM::UInt32 LocalPort; Local module port. Constant CICM::IMPLICIT_LOCAL_PORT const CICM::LocalPort IMPLICIT_LOCAL_PORT = 0xFFFFFFBB; Value that indicates that the local port value is implicit. Constant CICM::FILL_INTERFACE_PORT const CICM::LocalPort FILL_INTERFACE_PORT = 0xFFFFFFEE; Value that represents the port on which keys are filled or exported. 3.2.2.7. State Vector Type CICM::Vector typedef CICM::Buffer Vector; State vector, used to represent initialization vectors, synchronization vectors, counter values, and time-of-day values. Lanz & Novikov Expires January 8, 2011 [Page 31] Internet-Draft CICM July 2010 3.2.2.8. Integrity Buffers Type CICM::HashBuffer typedef CICM::Buffer HashBuffer; Cryptographic hash. Type CICM::MACBuffer typedef CICM::Buffer MACBuffer; Message authentication code (MAC). Type CICM::SigBuffer typedef CICM::Buffer SigBuffer; Cryptographic signature. 3.2.3. Fundamental Interfaces 3.2.3.1. Interface CICM::CICMRoot Interface CICM::CICMRoot interface CICMRoot CICMRoot serves as the entry point to the CICM API and enables a specific cryptographic module of potentially many modules available to a host to be selected. {FIGURE REMOVED} Figure 10. Interface Relationship Diagram for CICMRoot 3.2.3.1.1. CICM::CICMRoot Methods Method CICM::CICMRoot::get_module_by_id() CICM::Status get_module_by_id( in CICM::ModuleId id, out CICM::CryptoModule crypto_module_ref ); Returns a reference to the module with the given module unique identifier. Parameters: [in] id Unique identifier for the module. [out] crypto_module_ref Module associated with the given identifier. Returns: Lanz & Novikov Expires January 8, 2011 [Page 32] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_MODULE_DOES_NOT_EXIST Example (C++): CICM::Status sCode; CICM::CryptoModule device; // Instantiate the root object. CICM::CICMRoot cicm = new CICM::CICMRoot(); // Retrieve a reference to the module // corresponding to the specified module identifier. const string MODULE_ID = "CM10293495867"; // If found, [device] refers to the specified crypto module. sCode = cicm.get_module_by_id(MODULE_ID, &device); 3.2.3.2. Interface CICM::CryptoModule Interface CICM::CryptoModule interface CryptoModule CICM::CryptoModule contains attributes that provide access to module- specific information and attributes that enable access to module managers, through which nearly all interface functionality is accessed. {FIGURE REMOVED} Figure 11. Interface Relationship Diagram for CryptoModule 3.2.3.2.1. CICM::CryptoModule Attributes Attribute CICM::CryptoModule::module_id readonly attribute CICM::ModuleId module_id; Unique identifier for this module. Attribute CICM::CryptoModule::manufacturer readonly attribute CICM::CharString manufacturer; Name of cryptographic module manufacturer. Attribute CICM::CryptoModule::model readonly attribute CICM::CharString model; Model of cryptographic module. Lanz & Novikov Expires January 8, 2011 [Page 33] Internet-Draft CICM July 2010 Attribute CICM::CryptoModule::serial_number readonly attribute CICM::CharString serial_number; Serial number of cryptographic module. Attribute CICM::CryptoModule::module_version readonly attribute CICM::CharString module_version; Hardware version of cryptographic module. Attribute CICM::CryptoModule::software_version readonly attribute CICM::CharString software_version; Currently executing software/firmware version number. Attribute CICM::CryptoModule::driver_version readonly attribute CICM::CharString driver_version; CICM module-specific abstraction layer version number. Attribute CICM::CryptoModule::library_version readonly attribute CICM::CharString library_version; CICM library version number. Attribute CICM::CryptoModule::role readonly attribute CICM::RoleId role; Current security role in which module is operating. Attribute CICM::CryptoModule::date_time attribute CICM::CharString date_time; Current date/time. Intended for use only with module services that require coarse-grained time (e.g., timestamp on a log), not for time- of-day encryption. Attribute CICM::CryptoModule::sym_key_manager readonly attribute CICM::SymKeyManager sym_key_manager; Reference to CICM::SymKeyManager. Attribute CICM::CryptoModule::asym_key_manager readonly attribute CICM::AsymKeyManager asym_key_manager; Reference to CICM::AsymKeyManager. Attribute CICM::CryptoModule::key_database readonly attribute CICM::KeyDatabase key_database; Reference to CICM::KeyDatabase. Attribute CICM::CryptoModule::channel_manager readonly attribute CICM::ChannelManager channel_manager; Reference to CICM::ChannelManager. Lanz & Novikov Expires January 8, 2011 [Page 34] Internet-Draft CICM July 2010 Attribute CICM::CryptoModule::event_manager readonly attribute CICM::ModuleEventManager event_manager; Reference to CICM::ModuleEventManager. Attribute CICM::CryptoModule::package_manager readonly attribute CICM::PackageManager package_manager; Reference to CICM::PackageManager. Attribute CICM::CryptoModule::token_manager readonly attribute CICM::TokenManager token_manager; Reference to CICM::TokenManager. Attribute CICM::CryptoModule::user_manager readonly attribute CICM::UserManager user_manager; Reference to CICM::UserManager. Attribute CICM::CryptoModule::login_manager readonly attribute CICM::LoginManager login_manager; Reference to CICM::LoginManager. Attribute CICM::CryptoModule::test_manager readonly attribute CICM::TestManager test_manager; Reference to CICM::TestManager. Attribute CICM::CryptoModule::log_manager readonly attribute CICM::LogManager log_manager; Reference to CICM::LogManager. 3.2.3.2.2. CICM::CryptoModule Methods Method CICM::CryptoModule::configure_fill_interface() CICM::Status configure_fill_interface( in CICM::Buffer interface_parameters, in CICM::LocalPort fill_port ); Configure a module key fill interface. Remarks: This method accepts an opaque buffer containing a module-specific data structure specifying fill port configuration parameters. The format of the interface parameters value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Lanz & Novikov Expires January 8, 2011 [Page 35] Internet-Draft CICM July 2010 Parameters: [in] interface_parameters Opaque buffer containing the fill interface configuration parameters. [in] fill_port Fill port to configure. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_INVALID_DATA_BUFFER, S_KEY_FILL_DEVICE_NOT_CONNECTED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::CryptoModule::reset() CICM::Status reset(); Perform a software-initiated reset on the module. Remarks: This method attempts to restart a module in the event of a module failure or in the event a module has entered an alarm state. A CICM::S_OK status denotes that the command was accepted by the module or runtime system, not that any specific action has been initiated as a result of the reset request. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.2.3.3. Interface CICM::Iterator Interface CICM::Iterator interface Iterator Interface from which other iterators are inherited. Remarks: The specification does not define any specific order in which iterated elements are returned. Lanz & Novikov Expires January 8, 2011 [Page 36] Internet-Draft CICM July 2010 3.2.3.3.1. CICM::Iterator Types and Constants Type CICM::Iterator::Status typedef CICM::UInt32 Status; Indicates whether or not there are more items over which to iterate. Constant CICM::Iterator::C_ITERATOR_HAS_NEXT const CICM::Iterator::Status C_ITERATOR_HAS_NEXT = 0x00006031; There are more items in the list. Constant CICM::Iterator::C_ITERATOR_NO_MORE const CICM::Iterator::Status C_ITERATOR_NO_MORE = 0x00006032; There are no more items in the list. 3.2.3.3.2. CICM::Iterator Methods Method CICM::Iterator::has_next() CICM::Status has_next( out CICM::Iterator::Status has_next ); Used with get_next() to determine if one or more additional elements are available to be retrieved. Remarks: For elements that have not already been processed, changes in the state of the list/database over which the iterator is being run during the lifetime of the iterator will be reflected in the results from calls to retrieve iterator elements. Parameters: [out] has_next Indicates whether more elements are available to be retrieved. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 37] Internet-Draft CICM July 2010 3.3. Module Management 3.3.1. Managing Hardware Access Tokens Cryptographic modules may rely upon hardware access tokens for two primary functions: to allow subjects (e.g., administrators or users in possession of a token) to be identified and authenticated so that privileges can be enforced and audit log entries can identify the subject; and to unlock all or some subset of cryptographic services. A hardware access token may be associated with a number of specific modules, and a module may likewise be associated with a number of specific tokens. The token management functions below enable tokens and modules to be associated with and disassociated from one another, and allow existing associations to be listed. The removal of an association between a token and a module is straightforward if both the token and the module are available. However, if either the token or module are unavailable, or if a different module than the one originally associated with the token is used to remove an association from a token, the disassociation is less straightforward. If a module requires that an administrative token be inserted prior to the token to which the association/disassociation will apply, the methods below may return an CICM::S_TOKEN_NOT_PRESENT or CICM:: S_TOKEN_ADMIN_NOT_PRESENT status. Modules that do not support hardware tokens may instead provide similar support via CICM::LoginManager. Modules may use CICM:: LoginManager in tandem with tokens to support multi-factor authentication. See the Managing Module Authentication subsection in Section 2 for additional information. 3.3.1.1. Interface CICM::TokenManager Interface CICM::TokenManager interface TokenManager { CICM::TokenManager supports associating and disassociating modules and tokens. It is accessed from CICM::CryptoModule via the CICM:: CryptoModule::token_manager attribute. CICM::TokenManager constructs the CICM::ModuleAssnIterator and CICM::TokenAssnIterator interfaces. {FIGURE REMOVED} Figure 12. Interface Relationship Diagram for TokenManager Lanz & Novikov Expires January 8, 2011 [Page 38] Internet-Draft CICM July 2010 Example (C++): // See CICMRoot::get_module_by_id() // to retrieve reference to CryptoModule. CICM::CryptoModule device; CICM::Status sCode; CICM::tokenManager tokenManager; // Retrieve reference to the token manager. tokenManager = device._get_token_manager(); // Associate the current token with the module. sCode = tokenManager.associate(); // Assume that some time later the token is lost or destroyed. // Disassociate the token from the module. CICM::TokenUniqueId tokenId = new CICM::TokenUniqueId("TOKEN1426864"); sCode = tokenManager.disassociate_missing_token(tokenId); 3.3.1.1.1. CICM::TokenManager Attributes Attribute CICM::TokenManager::module_association_iterator readonly attribute CICM::ModuleAssnIterator module_association_iterator; Returns an iterator to enable each module identifier associated with the current token to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. Attribute CICM::TokenManager::token_association_iterator readonly attribute CICM::TokenAssnIterator token_association_iterator; Returns an iterator to enable each token identifier associated with the current module to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. Lanz & Novikov Expires January 8, 2011 [Page 39] Internet-Draft CICM July 2010 3.3.1.1.2. CICM::TokenManager Methods Method CICM::TokenManager::associate() CICM::Status associate( out CICM::ModuleRecord module_rec, out CICM::TokenRecord token_rec ); Associate the module and currently-inserted hardware access token. Remarks: The module and token record identifiers should be recorded for use in the disassociation process in the event that either the module or the token are no longer available or usable. The formats of the module and token records are not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for these datatypes. Parameters: [in] module_rec Module record identifier of the newly associated module. [in] token_rec Token record identifier of the newly associated token. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_TOKEN_ACCESS, S_TOKEN_RESOURCES, S_TOKEN_ASSOC_EXISTS, S_TOKEN_ASSOC_AT_MODULE, S_TOKEN_ASSOC_AT_TOKEN, S_TOKEN_ASSOC_GENERAL, S_TOKEN_TIMEOUT Method CICM::TokenManager::disassociate() CICM::Status disassociate(); Disassociate the module and currently-inserted hardware access token when the associated module and token are both present and both recognize the association. Returns: Lanz & Novikov Expires January 8, 2011 [Page 40] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_TOKEN_ACCESS, S_TOKEN_ASSOC_NOT_EXIST, S_TOKEN_DISASSOC_GENERAL, S_TOKEN_TIMEOUT, S_TOKEN_LAST_ASSOCIATED Method CICM::TokenManager::disassociate_missing_module() CICM::Status disassociate_missing_module( in CICM::ModuleRecord module_rec ); Remove association information from the currently-inserted hardware access token when the associated module is not present. Remarks: The module on which this method is being executed is used as a surrogate to perform the disassociation (it is not the module that performed the initial association). The specific module to disassociate from the token is identified by a unique module identifier (e.g., a module serial number). Use CICM:: ModuleAssnIterator to retrieve module record identifiers corresponding to modules associated with the inserted token. The format of the module record is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Parameters: [in] module_rec Identifies the module for which module identification information should be removed from the currently- inserted hardware access token. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_TOKEN_ACCESS, S_TOKEN_DISASSOC_GENERAL, S_TOKEN_REC_NOT_FOUND, S_TOKEN_TIMEOUT Lanz & Novikov Expires January 8, 2011 [Page 41] Internet-Draft CICM July 2010 Method CICM::TokenManager::disassociate_missing_token() CICM::Status disassociate_missing_token( in CICM::TokenRecord token_rec ); Remove association information from the module on which this method is being executed when the associated token is not present. Remarks: The specific token to disassociate from the module is identified by a unique token identifier (e.g., a token serial number). Use CICM::TokenAssnIterator to retrieve token record identifiers corresponding to associated tokens from the module. The format of the token record is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Parameters: [in] token_rec Identifies the hardware access token for which token identification information should be removed from the module. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_ADMIN_NOT_PRESENT, S_TOKEN_ASSOC_NOT_EXIST, S_TOKEN_DISASSOC_GENERAL, S_TOKEN_REC_NOT_FOUND, S_TOKEN_TIMEOUT 3.3.1.2. Interface CICM::TokenAssnIterator Interface CICM::TokenAssnIterator interface TokenAssnIterator : CICM::Iterator { CICM::TokenAssnIterator supports retrieving each token record from the token association list in the module. 3.3.1.2.1. CICM::TokenAssnIterator Inheritance CICM::TokenAssnIterator inherits from: CICM::Iterator. Lanz & Novikov Expires January 8, 2011 [Page 42] Internet-Draft CICM July 2010 3.3.1.2.2. CICM::TokenAssnIterator Methods Method CICM::TokenAssnIterator::get_next() CICM::Status get_next( out CICM::TokenRecord token_rec_ref ); Returns a reference to the next token. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] token_rec_ref Reference to next token. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.3.1.3. Interface CICM::ModuleAssnIterator Interface CICM::ModuleAssnIterator interface ModuleAssnIterator : CICM::Iterator { CICM::ModuleAssnIterator supports retrieving each module record from the module association list in the token. 3.3.1.3.1. CICM::ModuleAssnIterator Inheritance CICM::ModuleAssnIterator inherits from: CICM::Iterator. 3.3.1.3.2. CICM::ModuleAssnIterator Methods Method CICM::ModuleAssnIterator::get_next() CICM::Status get_next( out CICM::ModuleRecord module_rec_ref ); Returns a reference to the next module record from the module association list in the token. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 43] Internet-Draft CICM July 2010 Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] module_rec_ref Reference to next module record. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.3.2. Managing Users These interfaces enable the management of users in support of password-based login. See the Managing Module Authentication subsection in Section 2 for additional information. 3.3.2.1. Interface CICM::UserManager Interface CICM::UserManager interface UserManager { CICM::UserManager supports adding a user/password, modifying a user's password, and removing users; and associating and disassociating users from a role. It is accessed from CICM::CryptoModule via the CICM::CryptoModule::user_manager attribute. CICM::UserManager constructs the CICM::UserIdIterator and CICM::RoleIdIterator interfaces. {FIGURE REMOVED} Figure 13. Interface Relationship Diagram for UserManager Lanz & Novikov Expires January 8, 2011 [Page 44] Internet-Draft CICM July 2010 Example (C++): // See CICMRoot::get_module_by_id() // to retrieve reference to CryptoModule. CICM::CryptoModule device; CICM::Status sCode; CICM::UserManager userManager; // Retrieve reference to the user manager. userManager = device._get_user_manager(); // Create the user. CICM::UserUniqueId userId = "bob_smith"; CICM::CharString password = "p@$$w0rd"; sCode = userManager.add(userId, password); // Associate the user with a pre-defined module role. CICM::RoleUniqueId roleId = "administrator"; sCode = userManager.associate(userId, roleId); // Destroy the user. sCode = userManager.remove(userId); 3.3.2.1.1. CICM::UserManager Attributes Attribute CICM::UserManager::user_iterator readonly attribute CICM::UserIdIterator user_iterator; Returns an iterator to enable an identifier for each user in the module user database to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. Attribute CICM::UserManager::role_iterator readonly attribute CICM::RoleIdIterator role_iterator; Returns an iterator to enable an identifier for each role supported by the module to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. Lanz & Novikov Expires January 8, 2011 [Page 45] Internet-Draft CICM July 2010 3.3.2.1.2. CICM::UserManager Methods Method CICM::UserManager::add() CICM::Status add( in CICM::UserId user, in CICM::CharString password ); Add a user to the module user database. Parameters: [in] user New user to add. [in] password New user's password. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_USERNAME_INVALID, S_USER_EXISTS, S_PASSWORD_INVALID, S_PASSWORD_INVALID_CHAR, S_PASSWORD_INVALID_LEN Method CICM::UserManager::modify() CICM::Status modify( in CICM::UserId user, in CICM::CharString password ); Change the password of a user in the module user database. Parameters: [in] user User to modify. [in] password User's new password. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_USER_INVALID, S_PASSWORD_INVALID, S_PASSWORD_INVALID_CHAR, S_PASSWORD_INVALID_LEN Lanz & Novikov Expires January 8, 2011 [Page 46] Internet-Draft CICM July 2010 Method CICM::UserManager::remove() CICM::Status remove( in CICM::UserId user ); Remove a user from the module user database. Parameters: [in] user User to remove. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_USER_INVALID Method CICM::UserManager::associate() CICM::Status associate( in CICM::UserId user, in CICM::RoleId role ); Associate a role with the specified user. Parameters: [in] user User to associate. [in] role Role to associate with the user. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_USER_INVALID, S_ROLE_INVALID, S_ROLE_ASSOCIATED, S_ROLE_MAX Lanz & Novikov Expires January 8, 2011 [Page 47] Internet-Draft CICM July 2010 Method CICM::UserManager::disassociate() CICM::Status disassociate( in CICM::UserId user, in CICM::RoleId role ); Disassociate a role from the specified user. Parameters: [in] user User to disassociate. [in] role Role to disassociate from the user. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_USER_INVALID, S_ROLE_INVALID, S_ROLE_NOT_ASSOCIATED 3.3.2.2. Interface CICM::UserIdIterator Interface CICM::UserIdIterator interface UserIdIterator : CICM::Iterator { CICM::UserIdIterator supports retrieving each user configured on a module. 3.3.2.2.1. CICM::UserIdIterator Inheritance CICM::UserIdIterator inherits from: CICM::Iterator. 3.3.2.2.2. CICM::UserIdIterator Methods Method CICM::UserIdIterator::get_next() CICM::Status get_next( out CICM::UserId user_id ); Returns the next user identifier. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 48] Internet-Draft CICM July 2010 [out] user_id Next user identifier. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.3.2.3. Interface CICM::RoleIdIterator Interface CICM::RoleIdIterator interface RoleIdIterator : CICM::Iterator { CICM::RoleIdIterator supports retrieving each role available on a module. 3.3.2.3.1. CICM::RoleIdIterator Inheritance CICM::RoleIdIterator inherits from: CICM::Iterator. 3.3.2.3.2. CICM::RoleIdIterator Methods Method CICM::RoleIdIterator::get_next() CICM::Status get_next( out CICM::RoleId role_id ); Returns the next role identifier. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] role_id Reference to next role identifier. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 49] Internet-Draft CICM July 2010 3.3.3. Managing Login These interfaces support a user configured on a module to login to a module using a password and, optionally, additional authentication data. See the Managing Module Authentication subsection in Section 2 for additional information. Modules that support hardware tokens may use the login manager in tandem with the CICM::TokenManager to support multi-factor authentication. 3.3.3.1. Interface CICM::LoginManager Interface CICM::LoginManager interface LoginManager { CICM::LoginManager supports user login to a module. It is accessed from CICM::CryptoModule via the CICM::CryptoModule::login_manager attribute. CICM::LoginManager constructs the CICM::Login interface. The LoginManager relies upon the CICM::UserManager to manage the users that are specified to the login methods. {FIGURE REMOVED} Figure 14. Interface Relationship Diagram for LoginManager Example (C++): // See CICMRoot::get_module_by_id() // to retrieve reference to CryptoModule. CICM::CryptoModule device; CICM::Status sCode; CICM::LoginManager loginManager; CICM::Login loginRef; // Retrieve reference to the login manager. loginManager = device._get_login_manager(); // Login to the module. CICM::UserUniqueId userId = "bob_smith"; CICM::CharString password = "p@$$w0rd"; sCode = loginManager.add(userId, password, &loginRef); // Logout from the module. sCode = loginRef.logout(); Lanz & Novikov Expires January 8, 2011 [Page 50] Internet-Draft CICM July 2010 3.3.3.1.1. CICM::LoginManager Methods Method CICM::LoginManager::login() CICM::Status login( in CICM::UserId user, in CICM::CharString password, out CICM::Login login_ref ); Login to the module with username/password. Parameters: [in] user User attempting to login. [in] password User's password. [out] login_ref Reference to state resulting from successful user login enabling the user to later logout. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_AUTHENTICATION_FAILED, S_USER_AUTHENTICATED Method CICM::LoginManager::login_auth_data() CICM::Status login_auth_data( in CICM::UserId user, in CICM::CharString password, in CICM::Buffer auth_data, out CICM::Login login_ref ); Login to the module with username/password, but provide additional (potentially host-stored) authentication data to the module for use in the authentication process. Remarks: This may be used in cases where the host supports a virtual token. The format of the authentication data is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Lanz & Novikov Expires January 8, 2011 [Page 51] Internet-Draft CICM July 2010 Parameters: [in] user User attempting to login. [in] password User's password. [in] auth_data Additional host-stored authentication data. [out] login_ref Reference to state resulting from successful user login enabling the user to later logout. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_INVALID_DATA_BUFFER, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_AUTHENTICATION_FAILED, S_USER_AUTHENTICATED 3.3.3.2. Interface CICM::Login Interface CICM::Login interface Login { CICM::Login results from a successful user login to a module and enables the user to log out from the module. 3.3.3.2.1. CICM::Login Methods Method CICM::Login::logout() CICM::Status logout(); Logout of the module. Remarks: This may be equivalent to disconnecting a hardware access token from a module in certain systems. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 52] Internet-Draft CICM July 2010 3.3.4. Managing Software Packages These interfaces support software, FPGA images, policy databases, configuration parameters, or other types of executable or interpretable code to be imported into and removed from a module. 3.3.4.1. Interface CICM::PackageManager Interface CICM::PackageManager interface PackageManager { CICM::PackageManager supports the management of module software packages. It is accessed from CICM::CryptoModule via the CICM:: CryptoModule::package_manager attribute. CICM::PackageManager constructs the CICM::PackageImporter, CICM::PackageIterator, and CICM::Package interfaces. {FIGURE REMOVED} Figure 15. Interface Relationship Diagram for PackageManager Example (C++): // See CICMRoot::get_module_by_id() // to retrieve reference to CryptoModule. CICM::CryptoModule device; CICM::Status sCode; CICM::PackageManager packageManager; CICM::PackageImporter packageImporter; // Retrieve reference to the package manager. packageManager = device._get_package_manager(); // Initialize the import process. sCode = packageManager.import_package( CICM::Package::C_PACKAGE_FPGA_IMAGE, &packageImporter); // Assume FPGA image data in [fpgaData]. CICM::Buffer fpgaData; sCode = packageImporter.import_segment(fpgaData); // Assume all segments are imported. // Complete the import process. CICM::Package fpgaPackage; sCode = packageImporter.complete(&fpgaPackage); // If successful, [fpgaPackage] is a reference to the imported package. // Activate the package. sCode = fpgaPackage.activate(); Lanz & Novikov Expires January 8, 2011 [Page 53] Internet-Draft CICM July 2010 3.3.4.1.1. CICM::PackageManager Attributes Attribute CICM::PackageManager::package_iterator readonly attribute CICM::PackageIterator package_iterator; Returns an iterator to enable a reference to each package loaded on the module to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. 3.3.4.1.2. CICM::PackageManager Methods Method CICM::PackageManager::import_package() CICM::Status import_package( in CICM::Package::PackageType package_type, out CICM::PackageImporter importer_ref ); Initiate the process of importing a package into the module. Remarks: The CICM::PackageImporter that results from this call is used to import package segments into the module. It is the responsibility of the caller to break a package into segments, import each individual segment, and then call CICM::PackageImporter::complete to receive a reference to the resulting package. Note that the key required to decrypt any encrypted package segments must be referenced within the package and must be available to the module; the key may be explicitly specified by using the CICM:: PackageManager::import_package_with_key version of the call. Parameters: [in] package_type Type of the package being imported. [out] importer_ref Reference to package importer interface which enables a package to be imported segment by segment. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_TYPE_INVALID, S_PACKAGE_KEY_NOT_AVAILABLE, S_PACKAGE_KEY_NOT_SPECIFIED Lanz & Novikov Expires January 8, 2011 [Page 54] Internet-Draft CICM July 2010 Method CICM::PackageManager::import_package_with_key() CICM::Status import_package_with_key( in CICM::Package::PackageType package_type, in CICM::SymKey key_ref, out CICM::PackageImporter importer_ref ); Initiate the process of importing a package into the module, specifying a reference to the key that will be used by CICM:: PackageImporter to decrypt each package segment. Remarks: The CICM::PackageImporter that results from this call is used to import package segments into the module. It is the responsibility of the caller to break a package into segments, import each individual segment, and then call CICM::PackageImporter::complete to receive a reference to the resulting package. Parameters: [in] package_type Type of the package being imported. [in] key_ref Reference to key to decrypt package segments. [out] importer_ref Reference to package importer interface which enables a package to be imported segment by segment. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_TYPE_INVALID Method CICM::PackageManager::get_package_by_id() CICM::Status get_package_by_id( in CICM::PackageId package_id, out CICM::Package package_ref ); Retrieve a reference to a package based upon a unique identifier associated with that package. Parameters: [in] package_id Package identifier. Lanz & Novikov Expires January 8, 2011 [Page 55] Internet-Draft CICM July 2010 [out] package_ref Reference to package corresponding to the specified identifier. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::PackageManager::reencrypt_software() CICM::Status reencrypt_software(); Re-encrypt module software with a key managed by the module. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_INSUFFICIENT_ENTROPY 3.3.4.2. Interface CICM::PackageImporter Interface CICM::PackageImporter interface PackageImporter { CICM::PackageImporter supports importing software packages, segment by segment. CICM::PackageImporter is constructed by the CICM:: PackageManager::import_package and CICM::PackageManager:: import_package_with_key methods and may not be instantiated independently. CICM::PackageImporter constructs the CICM::Package interface. 3.3.4.2.1. CICM::PackageImporter Methods Method CICM::PackageImporter::import_segment() CICM::Status import_segment( in CICM::Buffer package_data ); Import one segment of a package. Remarks: It is the responsibility of the caller to break a package into segments, import each individual segment, and then call CICM:: PackageImporter::complete to receive a reference to the resulting package. Lanz & Novikov Expires January 8, 2011 [Page 56] Internet-Draft CICM July 2010 CICM does not specify the structure of the binary data that constitutes the package being imported. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer- specific format implemented by the module for this datatype. Parameters: [in] package_data Contents of the package. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_INVALID Method CICM::PackageImporter::complete() CICM::Status complete( out CICM::Package package_ref ); Declare the package import complete and retrieve a reference to the resulting package object. Remarks: If this method is called before the package is fully loaded, the CICM::S_PACKAGE_INVALID status results. Parameters: [out] package_ref Reference to resulting imported package. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_INVALID Method CICM::PackageImporter::abort() CICM::Status abort(); Abort a package import, resetting this CICM::PackageImporter instance, allowing a new package import session to begin. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 57] Internet-Draft CICM July 2010 Segments already imported are discarded. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.3.4.3. Interface CICM::Package Interface CICM::Package interface Package { CICM::Package serves as a reference to a package previously loaded into a module, and supports activating, deactivating, and deleting the package. CICM::Package is constructed by the CICM:: PackageManager::get_package_by_id and CICM::PackageImporter::complete methods and may not be instantiated independently. 3.3.4.3.1. CICM::Package Types and Constants Type CICM::Package::PackageType typedef CICM::UInt32 PackageType; Supported package types. Constant CICM::Package::C_PACKAGE_ALGORITHM const CICM::Package::PackageType C_PACKAGE_ALGORITHM = 0x00006054; Algorithm package type. Constant CICM::Package::C_PACKAGE_CONFIG_PARAMS const CICM::Package::PackageType C_PACKAGE_CONFIG_PARAMS = 0x00006057; Configuration parameter package type. Constant CICM::Package::C_PACKAGE_FPGA_IMAGE const CICM::Package::PackageType C_PACKAGE_FPGA_IMAGE = 0x00006058; FPGA image package type. Constant CICM::Package::C_PACKAGE_POLICY_DB const CICM::Package::PackageType C_PACKAGE_POLICY_DB = 0x0000605B; Policy database package type. Lanz & Novikov Expires January 8, 2011 [Page 58] Internet-Draft CICM July 2010 Constant CICM::Package::C_PACKAGE_SOFTWARE const CICM::Package::PackageType C_PACKAGE_SOFTWARE = 0x0000605D; Software package type. 3.3.4.3.2. CICM::Package Attributes Attribute CICM::Package::id readonly attribute CICM::PackageId id; Unique package identifier of this package. 3.3.4.3.3. CICM::Package Methods Method CICM::Package::activate() CICM::Status activate(); Activate a specific package on the module. Remarks: It may be necessary to reset the module before the specified package is activated in place of the currently activated package. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_NOT_ACTIVATABLE, S_PACKAGE_ACTIVATED, S_PACKAGE_INVALID Method CICM::Package::deactivate() CICM::Status deactivate(); Deactivate a specific package on the module. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_NOT_ACTIVE, S_PACKAGE_INVALID Lanz & Novikov Expires January 8, 2011 [Page 59] Internet-Draft CICM July 2010 Method CICM::Package::delete() CICM::Status delete(); Delete a package from the module. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PACKAGE_ACTIVATED, S_PACKAGE_INVALID 3.3.4.4. Interface CICM::PackageIterator Interface CICM::PackageIterator interface PackageIterator : CICM::Iterator { CICM::PackageIterator supports retrieving a reference to each software package available on a module. CICM::PackageIterator constructs the CICM::Package interface. 3.3.4.4.1. CICM::PackageIterator Inheritance CICM::PackageIterator inherits from: CICM::Iterator. 3.3.4.4.2. CICM::PackageIterator Methods Method CICM::PackageIterator::get_next() CICM::Status get_next( out CICM::Package package_ref ); Returns a reference to the next software package. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] package_ref Reference to next software package. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 60] Internet-Draft CICM July 2010 3.3.5. Managing Logs These interfaces support the retrieval and removal of log entries. 3.3.5.1. Interface CICM::LogManager Interface CICM::LogManager interface LogManager { CICM::LogManager supports retrieving or destroying an entire module log, or retrieving or deleting individual log entries. It is accessed from CICM::CryptoModule via the CICM::CryptoModule:: log_manager attribute. CICM::LogManager constructs the CICM:: LogEntryIterator interface. {FIGURE REMOVED} Figure 16. Interface Relationship Diagram for LogManager Example (C++): // See CICMRoot::get_module_by_id() // to retrieve reference to CryptoModule. CICM::CryptoModule device; CICM::Status sCode; CICM::LogManager logManager; // Retrieve reference to the log manager. logManager = device._get_log_manager(); // Retrieve reference to a log entry iterator. CICM::LogEntryIterator iter; iter = logManager._get_log_entry_iterator(); CICM::Iterator::Status status; CICM::LogEntry entry; // Confirm that there are log entries. sCode = iter.hasNext(&status); // Iterate over the log entries. while( CICM::Iterator::C_ITERATOR_HAS_NEXT == status ) { sCode = iter.get_next(&entry); // Perform an operation on [entry]. sCode = iter.hasNext(&status); } // Delete all of the log entries. sCode = logManager.destroy(); Lanz & Novikov Expires January 8, 2011 [Page 61] Internet-Draft CICM July 2010 3.3.5.1.1. CICM::LogManager Attributes Attribute CICM::LogManager::log_entry_iterator readonly attribute CICM::LogEntryIterator log_entry_iterator; Returns an iterator to enable a reference to each module CICM:: LogEntry to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. 3.3.5.1.2. CICM::LogManager Methods Method CICM::LogManager::retrieve() CICM::Status retrieve( out CICM::Buffer log_ref ); Retrieve a reference to the entire module log. Parameters: [out] log_ref Reference to entire module log. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::LogManager::destroy() CICM::Status destroy(); Destroy all entries in the module log. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 62] Internet-Draft CICM July 2010 3.3.5.2. Interface CICM::LogEntry Interface CICM::LogEntry interface LogEntry { CICM::LogEntry serves as a reference to an individual log entry in the module log, and supports retrieving information about an individual log entry and deleting an individual log entry. 3.3.5.2.1. CICM::LogEntry Attributes Attribute CICM::LogEntry::user_id readonly attribute CICM::UserId user_id; User initiating the module action resulting in this log entry. Attribute CICM::LogEntry::role_id readonly attribute CICM::RoleId role_id; Role under which the module action resulting in this log entry was initiated. Attribute CICM::LogEntry::message readonly attribute CICM::CharString message; Log message associated with this log entry. Attribute CICM::LogEntry::date_time readonly attribute CICM::CharString date_time; Date/time of creation of this log entry. 3.3.5.2.2. CICM::LogEntry Methods Method CICM::LogEntry::delete() CICM::Status delete(); Remove the current entry from the module log. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_LOG_ENTRY_INVALID Lanz & Novikov Expires January 8, 2011 [Page 63] Internet-Draft CICM July 2010 3.3.5.3. Interface CICM::LogEntryIterator Interface CICM::LogEntryIterator interface LogEntryIterator : CICM::Iterator { CICM::LogEntryIterator supports retrieving a reference to each log entry in the module log. CICM::LogEntryIterator constructs the CICM::LogEntry interface. 3.3.5.3.1. CICM::LogEntryIterator Inheritance CICM::LogEntryIterator inherits from: CICM::Iterator. 3.3.5.3.2. CICM::LogEntryIterator Methods Method CICM::LogEntryIterator::get_next() CICM::Status get_next( out CICM::LogEntry log_entry_ref ); Returns a reference to the next log entry. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] log_entry_ref Reference to next log entry. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.3.6. Managing Tests These interfaces support the initiation of module internal tests by client programs. Lanz & Novikov Expires January 8, 2011 [Page 64] Internet-Draft CICM July 2010 3.3.6.1. Interface CICM::TestManager Interface CICM::TestManager interface TestManager { CICM::TestManager supports initiating client program-invoked module built-in tests. It is accessed from CICM::CryptoModule via the CICM::CryptoModule::test_manager attribute. {FIGURE REMOVED} Figure 17. Interface Relationship Diagram for TestManager 3.3.6.1.1. CICM::TestManager Types and Constants Type CICM::TestManager::Status typedef CICM::UInt32 Status; Test state at completion. Constant CICM::TestManager::C_TEST_SUCCESS const CICM::TestManager::Status C_TEST_SUCCESS = 0x00006062; The test completed successfully. Constant CICM::TestManager::C_TEST_FAILURE const CICM::TestManager::Status C_TEST_FAILURE = 0x00006064; The test failed. 3.3.6.1.2. CICM::TestManager Methods Method CICM::TestManager::run_test() CICM::Status run_test( in CICM::Buffer test_parameters, out CICM::TestManager::Status status ); Run module built-in tests specifying module-specific test parameters. Remarks: This method can only initiate tests that a client program can explicitly request (e.g., this method does not apply to a series of tests automatically initiated during a module's start-up sequence). Running built-in tests on some modules may result in an alarm if an error is encountered during the test run. The format of the test parameters value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or Lanz & Novikov Expires January 8, 2011 [Page 65] Internet-Draft CICM July 2010 define a module developer-specific format implemented by the module for this datatype. Parameters: [in] test_parameters Module-specific test parameters. [out] status Status of test at completion. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_MODULE_IN_USE, S_INVALID_DATA_BUFFER, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::TestManager::run_test_get_results for the version of this method that returns test results. Method CICM::TestManager::run_test_get_results() CICM::Status run_test_get_results( in CICM::Buffer test_parameters, out CICM::Buffer test_results ); Run module built-in tests specifying module-specific test parameters and receiving module-specific results or data for later evaluation from the test run. Remarks: This method can only initiate tests that a client program can explicitly request (e.g., this method does not apply to a series of tests automatically initiated during a module's start-up sequence). Running built-in tests on some modules may result in an alarm if an error is encountered during the test run. The formats of the test parameters and test results values are not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for these datatypes. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 66] Internet-Draft CICM July 2010 [in] test_parameters Module-specific test parameters. [out] test_results Results of the test. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_MODULE_IN_USE, S_INVALID_DATA_BUFFER, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::TestManager::run_test for the version of this Method that returns a simple test status value. 3.3.7. Managing Module Events In certain cases it may be necessary for a module to asynchronously notify a client program of an event. Client programs can register to receive module notifications using CICM::ModuleEventManager. This manager enables a client program to register a listener (callback) method designed to handle a specific condition. The event method prototype provided by the client program is defined in CICM:: ModuleEventListener. CICM::ModuleEventListener also defines the conditions that may result in a notification, including: hardware requires attention, alarm, key expired, and health test failure. In certain cases, a single event on a module may result in the generation of multiple notification messages. For example, CICM:: ModuleEventListener::C_MODULE_ALARM may be followed by a CICM:: ModuleEventListener::C_MODULE_NOT_READY_FOR_TRAFFIC. 3.3.7.1. Interface CICM::ModuleEventManager Interface CICM::ModuleEventManager interface ModuleEventManager { CICM::ModuleEventManager supports registering and unregistering user- defined module event listeners (CICM::ModuleEventListener) for specific module events. It is accessed from CICM::CryptoModule via the CICM::CryptoModule::event_manager attribute. {FIGURE REMOVED} Figure 18. Interface Relationship Diagram for ModuleEventManagers Lanz & Novikov Expires January 8, 2011 [Page 67] Internet-Draft CICM July 2010 3.3.7.1.1. CICM::ModuleEventManager Methods Method CICM::ModuleEventManager::register() CICM::Status register( in CICM::ModuleEventListener::ModuleEvent event, in CICM::ModuleEventListener listener ); Registers the listener for a specific module event. Remarks: The provided listener applies only to the client program from which the registration is initiated. Parameters: [in] event Event for which this listener is being registered. [in] listener Listener that will receive a notification about the specified event. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_EVENT_REGISTERED, S_EVENT_NOT_SUPPORTED Method CICM::ModuleEventManager::unregister() CICM::Status unregister( in CICM::ModuleEventListener::ModuleEvent event ); Unregisters the listener associated with the specified event. Remarks: The listener associated with the specified event is only unregistered from the client program from which this method is called. Parameters: [in] event Event that will no longer have a listener associated with it. Returns: Lanz & Novikov Expires January 8, 2011 [Page 68] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_EVENT_NOT_REGISTERED 3.3.7.2. Interface CICM::ModuleEventListener Interface CICM::ModuleEventListener interface ModuleEventListener { CICM::ModuleEventListener is unlike other CICM interfaces in that the interface is implemented by the developer of the client program to service a specific module event and is then registered via the CICM:: ModuleEventManager. 3.3.7.2.1. CICM::ModuleEventListener Types and Constants Type CICM::ModuleEventListener::ModuleEvent typedef CICM::UInt32 ModuleEvent; Events for which a ModuleEventListener can be notified. Constant CICM::ModuleEventListener::C_MODULE_ACCESS_TOKEN_INSERTED const CICM::ModuleEventListener::ModuleEvent C_MODULE_ACCESS_TOKEN_INSERTED = 0x00002001; Access token has been inserted. Constant CICM::ModuleEventListener::C_MODULE_ACCESS_TOKEN_REMOVED const CICM::ModuleEventListener::ModuleEvent C_MODULE_ACCESS_TOKEN_REMOVED = 0x00002002; Access token has been removed. Constant CICM::ModuleEventListener::C_MODULE_ALARM const CICM::ModuleEventListener::ModuleEvent C_MODULE_ALARM = 0x00002004; Module has entered an alarm state. Constant CICM::ModuleEventListener::C_MODULE_FAILURE const CICM::ModuleEventListener::ModuleEvent C_MODULE_FAILURE = 0x00002007; Non-critical module failure detected. Constant CICM::ModuleEventListener::C_MODULE_INSUFFICIENT_ENTROPY const CICM::ModuleEventListener::ModuleEvent C_MODULE_INSUFFICIENT_ENTROPY = 0x00002008; Insufficient entropy available to a cryptographic operation that requires it. Lanz & Novikov Expires January 8, 2011 [Page 69] Internet-Draft CICM July 2010 Constant CICM::ModuleEventListener::C_MODULE_KEY_EXPIRED_HARD const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_EXPIRED_HARD = 0x0000200B; Specific key has expired; the module can optionally include identifying information about the specific key that expired in the event_data buffer that is provided with the event itself. Constant CICM::ModuleEventListener::C_MODULE_KEY_EXPIRED_SOFT const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_EXPIRED_SOFT = 0x0000200D; Specific key is within some system-defined delta of hard expiration; the module can optionally include identifying information about the specific key that is about to expire in the event_data buffer that is provided with the event itself. Constant CICM::ModuleEventListener::C_MODULE_KEY_FILL_COMPLETE const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_FILL_COMPLETE = 0x0000200E; Key fill is complete. Constant CICM::ModuleEventListener::C_MODULE_KEY_FILL_CONNECTED const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_FILL_CONNECTED = 0x00002010; Key fill device has been connected. Constant CICM::ModuleEventListener::C_MODULE_KEY_FILL_INITIATED const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_FILL_INITIATED = 0x00002013; Key fill has been initiated. Constant CICM::ModuleEventListener::C_MODULE_KEY_MEMORY const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_MEMORY = 0x00002015; Out of internal key memory condition. Constant CICM::ModuleEventListener::C_MODULE_KEY_PROTO_MESSAGE const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_PROTO_MESSAGE = 0x00002016; Key protocol message is available; see the Key Protocol Management documentation for additional information. Constant CICM::ModuleEventListener::C_MODULE_LOG_FULL const CICM::ModuleEventListener::ModuleEvent C_MODULE_LOG_FULL = 0x00002019; Module log is full. Lanz & Novikov Expires January 8, 2011 [Page 70] Internet-Draft CICM July 2010 Constant CICM::ModuleEventListener::C_MODULE_LOG_NEAR_FULL const CICM::ModuleEventListener::ModuleEvent C_MODULE_LOG_NEAR_FULL = 0x0000201A; Module log is nearly full. Constant CICM::ModuleEventListener::C_MODULE_LOGIN_FAILURE const CICM::ModuleEventListener::ModuleEvent C_MODULE_LOGIN_FAILURE = 0x0000201C; Attempted login failed. Constant CICM::ModuleEventListener::C_MODULE_NOT_READY_FOR_TRAFFIC const CICM::ModuleEventListener::ModuleEvent C_MODULE_NOT_READY_FOR_TRAFFIC = 0x0000201F; Module is not able to process traffic. Constant CICM::ModuleEventListener::C_MODULE_POWER_MGMT_ENTER const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_MGMT_ENTER = 0x00002020; Module has entered power management state. Constant CICM::ModuleEventListener::C_MODULE_POWER_MGMT_EXIT const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_MGMT_EXIT = 0x00002023; Module has exited power management state. Constant CICM::ModuleEventListener::C_MODULE_POWER_OFF const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_OFF = 0x00002025; Change in module power state to OFF detected. Constant CICM::ModuleEventListener::C_MODULE_POWER_OFF_FAILURE const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_OFF_FAILURE = 0x00002026; Disorderly change in module power state to OFF detected. Constant CICM::ModuleEventListener::C_MODULE_POWER_ON const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_ON = 0x00002029; Change in module power state to ON detected. Constant CICM::ModuleEventListener::C_MODULE_READY_FOR_TRAFFIC const CICM::ModuleEventListener::ModuleEvent C_MODULE_READY_FOR_TRAFFIC = 0x0000202A; Module is ready to process traffic. Lanz & Novikov Expires January 8, 2011 [Page 71] Internet-Draft CICM July 2010 Constant CICM::ModuleEventListener::C_MODULE_REKEY_REQUEST const CICM::ModuleEventListener::ModuleEvent C_MODULE_REKEY_REQUEST = 0x0000202C; Rekey of a specific key is required; the module can optionally include identifying information about the specific key to be rekeyed in the event_data buffer that is provided with the event itself. Constant CICM::ModuleEventListener::C_MODULE_TEST_FAILURE const CICM::ModuleEventListener::ModuleEvent C_MODULE_TEST_FAILURE = 0x0000202F; Module internal test has failed; the module can optionally include identifying information about the specific test that failed in the event_data buffer that is provided with the event itself. Constant CICM::ModuleEventListener::C_MODULE_ZEROIZED const CICM::ModuleEventListener::ModuleEvent C_MODULE_ZEROIZED = 0x00002031; Module has been zeroized. 3.3.7.2.2. CICM::ModuleEventListener Methods Method CICM::ModuleEventListener::event_occurred() void event_occurred( in CICM::ModuleEventListener::ModuleEvent event, in CICM::Buffer event_data ); Method implemented by client program that is called by the host runtime system to notify that a specific module event has occurred. Remarks: An opaque data field with additional information about the event in a module-specific format may optionally be provided with the event itself. This field may be of length zero. The format of the event data value is not defined in this specification. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module-specific format for this datatype. Note: Because this method is called by the runtime system and not a client program, it does not return a status value. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 72] Internet-Draft CICM July 2010 [in] event Event that occurred. [in] event_data Opaque data associated with the event (e.g., specific test that failed, key that will expire). 3.4. Key Management 3.4.1. General Key Concepts 3.4.1.1. Interface CICM::Key Interface CICM::Key interface Key { Interface from which symmetric and asymmetric key interfaces inherit. 3.4.1.1.1. Creating and Establishing Keys This specification provides facilities to convey key material into a cryptographic module via one of several methods, including importing key into the module through the API or a key fill interface, or generating or deriving key on the module. Key material may also be created through the use of a key establishment protocol between the module and a key infrastructure component or another module. Such a protocol is initiated between two or more parties to establish a secret key over a communications channel. The specification supports conveying generic protocol messages to and from a cryptographic module to effect the establishment of this secret key. See the CICM::KeyProtocolSender and CICM::KeyProtocolReceiver interfaces for additional information. Key metadata may be retrieved and set for individual keys. Metadata elements include the key identifier, alias, and classification. Keys imported via a fill device that are untagged may require certain metadata to be applied after the conclusion of the load, for example. {FIGURE REMOVED} Figure 19. Interface Inheritance Diagram for AsymKey and SymKey, Depicting Key Creation Methods 3.4.1.1.2. Exporting Keys Key material may also be exported out of a cryptographic module through the use of the key export functionality to enable transfer to another entity or for storage within the host system. Lanz & Novikov Expires January 8, 2011 [Page 73] Internet-Draft CICM July 2010 3.4.1.1.3. Destroying Keys This specification provides the ability to permanently and irretrievably destroy key material. These capabilities apply to keys managed by the module, whether stored internal to the module or stored externally. {FIGURE REMOVED} Figure 20. Interface Relationship and Inheritance Diagram Depicting Key Zeroization 3.4.1.1.4. Locating Keys A key is typically designated by a global identifier defined by the external key management system from which the key originated. Alternatively, a key may be designated by a numeric value representing the physical storage location of the key within the module. Key location methods enable a key object representing the key specified by a supplied identifier to be retrieved by the caller. Note that the format of the key identifier is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. {FIGURE REMOVED} Figure 21. Interface Relationship Diagram for Key Managers 3.4.1.1.5. Protecting Keys These methods enable the encryption and decryption of key material to support transferring keys between modules or other entities (including storage of key material external to the module). {FIGURE REMOVED} Figure 22. Interface Inheritance Diagram for AsymKey and SymKey, Depicting Key Protection Methods Lanz & Novikov Expires January 8, 2011 [Page 74] Internet-Draft CICM July 2010 3.4.1.1.6. CICM::Key Types and Constants Type CICM::Key::State typedef CICM::UInt32 State; Indicates whether or not the key is valid. Constant CICM::Key::C_KEY_INVALID const CICM::Key::State C_KEY_INVALID = 0x00006010; Key is invalid. Constant CICM::Key::C_KEY_VALID_WRAPPED const CICM::Key::State C_KEY_VALID_WRAPPED = 0x00006013; Key is valid and in wrapped form. Constant CICM::Key::C_KEY_VALID_UNWRAPPED const CICM::Key::State C_KEY_VALID_UNWRAPPED = 0x00006015; Key is valid and in unwrapped form. Type CICM::Key::UsageStatus typedef CICM::UInt32 UsageStatus; Indicates whether a key usage is allowed or forbidden. Constant CICM::Key::C_KEY_USAGE_ALLOWED const CICM::Key::UsageStatus C_KEY_USAGE_ALLOWED = 0x00006016; Key is valid for this usage. Constant CICM::Key::C_KEY_USAGE_FORBIDDEN const CICM::Key::UsageStatus C_KEY_USAGE_FORBIDDEN = 0x00006019; Key is not valid for this usage. 3.4.1.1.7. CICM::Key Attributes Attribute CICM::Key::identifier attribute CICM::CharString identifier; Unique global identifier for this key. Remarks: This identifier is the string representation of a key management authority-specific global key identifier. The identifier may be composed of multiple components; the representation of these components within the CICM identifier string is not defined in this specification. The Implementation Conformance Statement (see Lanz & Novikov Expires January 8, 2011 [Page 75] Internet-Draft CICM July 2010 Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this identifier. Warning: This attribute SHALL be unimplemented if CICM::Key::location is implemented. Attribute CICM::Key::location attribute CICM::UInt32 location; Module-specific physical storage location for this key. Warning: This attribute should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. This attribute SHALL be unimplemented if CICM::Key::identifier is implemented. Attribute CICM::Key::alias attribute CICM::CharString alias; Key alias, to assist in distinguishing one key from another. Attribute CICM::Key::classification attribute CICM::Classification classification; Key classification level. Attribute CICM::Key::caveat attribute CICM::CharString caveat; Key caveat, a protective marking or distribution/handling instruction that may augment classification level. Attribute CICM::Key::authority attribute CICM::CharString authority; Key management authority governing generation and use of key. Attribute CICM::Key::state readonly attribute CICM::Key::State state; State of key. A key may become invalid if zeroized, for example. Note that if an attempt is made to use an invalid key, the method accepting the key reference will return with an appropriate error status. Lanz & Novikov Expires January 8, 2011 [Page 76] Internet-Draft CICM July 2010 3.4.1.1.8. CICM::Key Methods Method CICM::Key::wrap() CICM::Status wrap( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm ); Instruct module to wrap key, destroying the original unwrapped key and replacing it with the newly wrapped key. Parameters: [in] kek Reference to key encryption key. [in] algorithm Key wrap algorithm/mode used to wrap key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_CLASSIFICATION, S_KEY_WRAPPED, S_KEY_NOT_WRAPPABLE, S_KEY_WRAPPED_EXISTS, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::Key::unwrap() CICM::Status unwrap( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm ); Instruct module to unwrap key, destroying the original wrapped key and replacing it with the newly unwrapped key. Parameters: [in] kek Reference to key decryption key. [in] algorithm Key wrap algorithm/mode used to unwrap key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, Lanz & Novikov Expires January 8, 2011 [Page 77] Internet-Draft CICM July 2010 S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_CLASSIFICATION, S_KEY_UNWRAPPED_EXISTS, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::Key::export() CICM::Status export( out CICM::Buffer key_material ); Export key material from a cryptographic module as an opaque binary object. Remarks: The key must have been previously wrapped, if required. See CICM::Key::wrap. Parameters: [out] key_material Binary version of the key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_KEY_NOT_WRAPPED, S_KEY_NOT_EXPORTABLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::Key::export_via_fill_interface() CICM::Status export_via_fill_interface( in CICM::LocalPort fill_port ); Export key material from a cryptographic module via a port representing a key fill interface. Remarks: The key must have been previously wrapped, if required. See CICM::Key::wrap. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 78] Internet-Draft CICM July 2010 [in] fill_port The local port from which the key will emanate. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_KEY_NOT_WRAPPED, S_KEY_NOT_EXPORTABLE, S_KEY_FILL_DEVICE_NOT_CONNECTED, S_KEY_FILL_NOT_INITIATED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::Key::zeroize() CICM::Status zeroize(); Zeroize the selected key. Remarks: Future cryptographic operations depending upon this key SHALL fail with a CICM::S_KEY_INVALID status. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.4.1.2. Interface CICM::KeyDatabase Interface CICM::KeyDatabase interface KeyDatabase { CICM::KeyDatabase supports zeroizing keys and reencrypting a module key database. It is accessed from CICM::CryptoModule via the CICM:: CryptoModule::key_database attribute. 3.4.1.2.1. CICM::KeyDatabase Methods Method CICM::KeyDatabase::zeroize() CICM::Status zeroize(); Zeroize all key material on the module. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 79] Internet-Draft CICM July 2010 This method renders all instantiated key objects invalid. Future cryptographic operations depending upon zeroized keys may fail with a CICM::S_KEY_INVALID status. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::KeyDatabase::reencrypt() CICM::Status reencrypt(); Re-encrypt the module key database. Remarks: This method uses a module-managed key to protect the key database and only applies to keys managed by the module, whether stored internal to the module or stored externally. Keys stored external to the module and not directly managed by the module must utilize the key wrap methods to protect key material. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_INSUFFICIENT_ENTROPY 3.4.2. Asymmetric Keys 3.4.2.1. Interface CICM::AsymKeyManager Interface CICM::AsymKeyManager interface AsymKeyManager { CICM::AsymKeyManager supports retrieving, importing, and generating asymmetric keysets. It is accessed from CICM::CryptoModule via the CICM::CryptoModule::asym_key_manager attribute. CICM::AsymKeyManager constructs the CICM::AsymKeyIterator and CICM::AsymKey interfaces. {FIGURE REMOVED} Figure 23. Interface Relationship Diagram for AsymKeyManager Lanz & Novikov Expires January 8, 2011 [Page 80] Internet-Draft CICM July 2010 3.4.2.1.1. CICM::AsymKeyManager Attributes AttributeCICM::AsymKeyManager::asymkey_iterator readonly attribute CICM::AsymKeyIterator asymkey_iterator; Returns an iterator to enable a reference to each asymmetric keyset in the module key database to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. 3.4.2.1.2. CICM::AsymKeyManager Methods Method CICM::AsymKeyManager::get_key_by_id() CICM::Status get_key_by_id( in CICM::KeyId key_id, out CICM::AsymKey key_ref ); Retrieves a reference to the asymmetric keyset corresponding to the specified infrastructure-specific identifier. Warning: This method SHALL be unimplemented if CICM::AsymKeyManager:: get_key_by_phys_location is implemented. Parameters: [in] key_id Unique identifier of the keyset to be retrieved. [out] key_ref Reference to keyset corresponding to key identifier. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INVALID_ID, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 81] Internet-Draft CICM July 2010 Method CICM::AsymKeyManager::get_key_by_phys_location() CICM::Status get_key_by_phys_location( in CICM::UInt32 phys_location, out CICM::AsymKey key_ref ); Retrieves a reference to the asymmetric keyset corresponding to the specified module physical storage location. Warning: This call should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. This method SHALL be unimplemented if CICM::AsymKeyManager:: get_key_by_id is implemented. Parameters: [in] phys_location Physical location of the key to be retrieved. [out] key_ref Reference to key corresponding to physical location. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_PHYSICAL_LOC, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::AsymKeyManager::get_key_last_filled() CICM::Status get_key_last_filled( out CICM::AsymKey key_ref ); Retrieves a reference to the asymmetric keyset corresponding to the keyset most recently filled via a key fill device. Remarks: A client program may need to initiate this action if key material imported into a module does not contain the corresponding key metadata. This method allows a reference to the last keyset Lanz & Novikov Expires January 8, 2011 [Page 82] Internet-Draft CICM July 2010 filled over the key fill interface to be referenced to enable metadata to be applied directly to the resulting keyset. The error status CICM::S_NOT_AVAILABLE is returned if no key is filled. Parameters: [out] key_ref Object representing last filled key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: SymKeyManager::get_key_last_filled for the symmetric version of this method. Method CICM::AsymKeyManager::import_key() CICM::Status import_key( in CICM::Buffer key_material, out CICM::AsymKey key_ref ); Import asymmetric keysets into a cryptographic module. Remarks: Keysets may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the keyset prior to use. Keyset attributes may optionally be set to create or supplement key metadata. The format of the key material value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Warning: This method SHALL be unimplemented if CICM::AsymKeyManager:: import_key_into_phys_location is implemented. Lanz & Novikov Expires January 8, 2011 [Page 83] Internet-Draft CICM July 2010 Parameters: [in] key_material Key material to be imported into the module. [out] key_ref Reference to newly imported key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_TRUST_ANCHOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::SymKeyManager::import_key for the symmetric version of this method. CICM::AsymKeyManager::import_key_via_fill for the key fill version of this method. CICM::AsymKeyManager::import_key_into_phys_location for the version of this method that imports key into a specific module key location. CICM::AsymKeyManager::import_key_via_fill_into_phys_location for the version of this method that fills key into a specific module key location. Method CICM::AsymKeyManager::import_key_into_phys_location() CICM::Status import_key_into_phys_location( in CICM::Buffer key_material, in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); Import key material into a specific physical key location in a cryptographic module. Remarks: Keysets may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the keyset prior to use. Keyset object attributes may optionally be set to create or supplement keyset metadata. Lanz & Novikov Expires January 8, 2011 [Page 84] Internet-Draft CICM July 2010 The format of the key material value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Warning: This call should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. This method SHALL be unimplemented if CICM::AsymKeyManager:: import_key is implemented. Parameters: [in] key_material Key material to be imported into the module. [in] phys_location Physical location into which to import keyset. [out] key_ref Reference to newly imported keyset. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_PHYSICAL_LOC, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_TRUST_ANCHOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::AsymKeyManager::import_key_via_fill() CICM::Status import_key_via_fill( in CICM::LocalPort fill_port, out CICM::AsymKey key_ref ); Initiate the import of key material via a key fill interface. Remarks: In some cases, a key fill device can initiate and effect the filling of key into a module completely independent of the host and thus any API control. In such cases, the host will utilize Lanz & Novikov Expires January 8, 2011 [Page 85] Internet-Draft CICM July 2010 the CICM::AsymKeyManager::get_key_by_id, CICM::AsymKeyManager:: get_key_by_phys_location, or CICM::AsymKeyManager:: get_key_last_filled methods after the key fill has completed to enable future reference to the keyset. Keysets may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the key prior to use. Keyset attributes may optionally be set to create or supplement keyset metadata. Warning: This method SHALL be unimplemented if CICM::AsymKeyManager:: import_key_via_fill_into_phys_location is implemented. Parameters: [in] fill_port Fill port on which to initiate import. [out] key_ref Reference to newly imported keyset. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_FILL_DEVICE_NOT_CONNECTED, S_KEY_FILL_NOT_INITIATED, S_KEY_TRUST_ANCHOR, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::AsymKeyManager::import_key_via_fill_into_phys_location() CICM::Status import_key_via_fill_into_phys_location( in CICM::LocalPort fill_port, in CICM::UInt32 phys_location, out CICM::AsymKey key_ref ); Initiate the import of key material into a specific key physical location via a key fill interface. Remarks: In some cases, a key fill device can initiate and effect the filling of key into a module completely independent of the host Lanz & Novikov Expires January 8, 2011 [Page 86] Internet-Draft CICM July 2010 and thus any API control. In such cases, the host will utilize the CICM::AsymKeyManager::get_key_by_id, CICM::AsymKeyManager:: get_key_by_phys_location, or CICM::AsymKeyManager:: get_key_last_filled methods after the key fill has completed to enable future reference to the keyset. Keysets may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the keyset prior to use. Keyset attributes may optionally be set to create or supplement keyset metadata. Warning: This call should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. This method SHALL be unimplemented if CICM::AsymKeyManager:: import_key_via_fill is implemented. Parameters: [in] fill_port Port of the key fill interface. [in] phys_location Physical location into which to import keyset. [out] key_ref Reference to newly imported keyset. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_PHYSICAL_LOC, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_FILL_DEVICE_NOT_CONNECTED, S_KEY_FILL_NOT_INITIATED, S_KEY_TRUST_ANCHOR, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 87] Internet-Draft CICM July 2010 Method CICM::AsymKeyManager::generate_key_pair() CICM::Status generate_key_pair( in CICM::AsymEncrAlgorithmId algorithm, out CICM::AsymKey key_ref ); Generate an asymmetric key pair compatible with the characteristics of the specified algorithm. Parameters: [in] algorithm Desired algorithm of resulting asymmetric key pair. [out] key_ref Reference to newly generated key pair. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_INSUFFICIENT_ENTROPY 3.4.2.2. Interface CICM::AsymKey Interface CICM::AsymKey interface AsymKey : CICM::Key { CICM::AsymKey serves as an abstraction for an asymmetric keyset, which may comprise an asymmetric key pair, the public and private key components of a keypair, the digital certificate corresponding to the keyset public key, one or more verification certificates in the certificate chain of trust, and related public domain parameters; and supports operations on asymmetric keys, including wrapping and unwrapping. 3.4.2.2.1. CICM::AsymKey Inheritance CICM::AsymKey inherits from: CICM::Key. 3.4.2.2.2. CICM::AsymKey Types and Constants Type CICM::AsymKey::Usage typedef CICM::UInt32 Usage; Asymmetric key usage types. Lanz & Novikov Expires January 8, 2011 [Page 88] Internet-Draft CICM July 2010 Constant CICM::AsymKey::C_USAGE_ASYM_DATA_ENCIPHERMENT const CICM::AsymKey::Usage C_USAGE_ASYM_DATA_ENCIPHERMENT = 0x00006001; Key intended for enciphering data. Constant CICM::AsymKey::C_USAGE_ASYM_KEY_ENCIPHERMENT const CICM::AsymKey::Usage C_USAGE_ASYM_KEY_ENCIPHERMENT = 0x00006002; Key intended for enciphering other keys. Constant CICM::AsymKey::C_USAGE_CERT_SIGN const CICM::AsymKey::Usage C_USAGE_CERT_SIGN = 0x00006004; Key intended for signing/verifying digital certificates. Constant CICM::AsymKey::C_USAGE_CRL_SIGN const CICM::AsymKey::Usage C_USAGE_CRL_SIGN = 0x00006007; Key intended for signing/verifying certificate revocation lists. Constant CICM::AsymKey::C_USAGE_DIGITAL_SIGNATURE const CICM::AsymKey::Usage C_USAGE_DIGITAL_SIGNATURE = 0x00006008; Key intended for producing digital signatures. Constant CICM::AsymKey::C_USAGE_INFRA_KEY_AGREEMENT const CICM::AsymKey::Usage C_USAGE_INFRA_KEY_AGREEMENT = 0x0000600B; Key intended for participating in an infrastructure key agreement protocol. Constant CICM::AsymKey::C_USAGE_P2P_KEY_AGREEMENT const CICM::AsymKey::Usage C_USAGE_P2P_KEY_AGREEMENT = 0x0000600D; Key intended for participating in a peer-to-peer key agreement protocol. Constant CICM::AsymKey::C_USAGE_SEED const CICM::AsymKey::Usage C_USAGE_SEED = 0x0000600E; Key intended to serve as seed material. Lanz & Novikov Expires January 8, 2011 [Page 89] Internet-Draft CICM July 2010 3.4.2.2.3. CICM::AsymKey Methods Method CICM::AsymKey::wrap_and_copy() CICM::Status wrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::AsymKey wrapped_key ); Instruct module to wrap keyset, resulting in two keysets, the original unwrapped keyset and the newly wrapped keyset. Parameters: [in] kek Reference to key encryption key. [in] algorithm Key wrap algorithm/mode used to wrap keyset. [out] wrapped_key Reference to resulting wrapped keyset. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_CLASSIFICATION, S_KEY_WRAPPED, S_KEY_NOT_WRAPPABLE, S_KEY_WRAPPED_EXISTS, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::SymKey::wrap_and_copy for the symmetric version of this method. Method CICM::AsymKey::unwrap_and_copy() CICM::Status unwrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::AsymKey unwrapped_key ); Instruct module to unwrap key, resulting in two keys, the original wrapped key and the newly unwrapped key. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 90] Internet-Draft CICM July 2010 [in] kek Reference to key decryption key. [in] algorithm Key wrap algorithm/mode used to unwrap keyset. [out] unwrapped_key Reference to resulting unwrapped keyset. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_CLASSIFICATION, S_KEY_UNWRAPPED_EXISTS, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::SymKey::unwrap_and_copy for the symmetric version of this method. Method CICM::AsymKey::validate_key_usage() CICM::Status validate_key_usage( in CICM::AsymKey::Usage usage_type, out CICM::Key::UsageStatus valid ); Validate that this keyset may be used for a specific purpose. Remarks: In some cases, a given keyset can be used for multiple purposes. Parameters: [in] usage_type Specific purpose to validate. [out] valid Indiciates whether or not the key may be used for the specified purpose. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, Lanz & Novikov Expires January 8, 2011 [Page 91] Internet-Draft CICM July 2010 S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::SymKey::validate_key_usage for the symmetric version of this method. 3.4.2.3. Interface CICM::AsymKeyIterator Interface CICM::AsymKeyIterator interface AsymKeyIterator : CICM::Iterator { CICM::AsymKeyIterator supports retrieving a reference to each usable asymmetric key on a module. CICM::AsymKeyIterator constructs the CICM::AsymKey interface. 3.4.2.3.1. CICM::AsymKeyIterator Inheritance CICM::AsymKeyIterator inherits from: CICM::Iterator. 3.4.2.3.2. CICM::AsymKeyIterator Methods Method CICM::AsymKeyIterator::get_next() CICM::Status get_next( out CICM::AsymKey asym_key_ref ); Returns a reference to the next asymmetric key. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] asym_key_ref Reference to next asymmetric key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 92] Internet-Draft CICM July 2010 3.4.3. Symmetric Keys 3.4.3.1. Interface CICM::SymKeyManager Interface CICM::SymKeyManager interface SymKeyManager { CICM::SymKeyManager supports retrieving, importing, generating and deriving symmetric keys; and operating key management protocols. It is accessed from CICM::CryptoModule via the CICM::CryptoModule:: sym_key_manager attribute. CICM::SymKeyManager constructs the CICM:: KeyProtocolSender, CICM::KeyProtocolReceiver, CICM::SymKeyIterator, and CICM::SymKey interfaces. {FIGURE REMOVED} Figure 24. Interface Relationship Diagram for SymKeyManager 3.4.3.1.1. CICM::SymKeyManager Attributes AttributeCICM::SymKeyManager::symkey_iterator readonly attribute CICM::SymKeyIterator symkey_iterator; Returns an iterator to enable a reference to each symmetric key in the module key database to be retrieved. Remarks: The returned iterator is set to the beginning of the iterated sequence. AttributeCICM::SymKeyManager::key_protocol_sender readonly attribute CICM::KeyProtocolSender key_protocol_sender; CICM::KeyProtocolSender supports sending key management protocol- related messages into a module. AttributeCICM::SymKeyManager::key_protocol_receiver readonly attribute CICM::KeyProtocolReceiver key_protocol_receiver; CICM::KeyProtocolReceiver supports receiving key management protocol- related messages from a module. CICM::KeyProtocolReceiver constructs the CICM::SymKey interface. Lanz & Novikov Expires January 8, 2011 [Page 93] Internet-Draft CICM July 2010 3.4.3.1.2. CICM::SymKeyManager Methods Method CICM::SymKeyManager::get_key_by_id() CICM::Status get_key_by_id( in CICM::KeyId key_id, out CICM::SymKey key_ref ); Retrieves a reference to the symmetric key corresponding to the specified infrastructure-specific identifier. Warning: This method SHALL be unimplemented if CICM::SymKeyManager:: get_key_by_phys_location is implemented. Parameters: [in] key_id Unique identifier of the key to be retrieved. [out] key_ref Reference to key corresponding to key identifier. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INVALID_ID, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SymKeyManager::get_key_by_phys_location() CICM::Status get_key_by_phys_location( in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); Retrieves a reference to the symmetric key corresponding to the specified module physical storage location. Warning: This call should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. Lanz & Novikov Expires January 8, 2011 [Page 94] Internet-Draft CICM July 2010 This method SHALL be unimplemented if CICM::SymKeyManager:: get_key_by_id is implemented. Parameters: [in] phys_location Physical location of the key to be retrieved. [out] key_ref Reference to key corresponding to physical location. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_PHYSICAL_LOC, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SymKeyManager::get_key_last_filled() CICM::Status get_key_last_filled( out CICM::SymKey key_ref ); Retrieves a reference to the symmetric key corresponding to the key most recently filled via a key fill device. Remarks: A client program may need to initiate this action if key material imported into a module does not contain the corresponding key metadata. This method allows a reference to the last key filled over the key fill interface to be referenced to enable metadata to be applied directly to the resulting key. The error status CICM:: S_NOT_AVAILABLE is returned if no key is filled. Parameters: [out] key_ref Reference to last filled key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 95] Internet-Draft CICM July 2010 Method CICM::SymKeyManager::import_key() CICM::Status import_key( in CICM::Buffer key_material, out CICM::SymKey key_ref ); Import key material or seed key for pseudorandom data generation into a cryptographic module. Remarks: Keys may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the key prior to use. Key attributes may optionally be set to create or supplement key metadata. The format of the key material value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Warning: This method SHALL be unimplemented if CICM::SymKeyManager:: import_key_into_phys_location is implemented. Parameters: [in] key_material Key material to be imported into the module. [out] key_ref Reference to newly imported key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_TRUST_ANCHOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Lanz & Novikov Expires January 8, 2011 [Page 96] Internet-Draft CICM July 2010 Method CICM::SymKeyManager::import_key_into_phys_location() CICM::Status import_key_into_phys_location( in CICM::Buffer key_material, in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); Import key material or seed key for pseudorandom data generation into a specific physical key location in a cryptographic module. Remarks: Keys may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the key prior to use. Key attributes may optionally be set to create or supplement key metadata. The format of the key material value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Warning: This call should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. This method SHALL be unimplemented if CICM::SymKeyManager:: import_key is implemented. Parameters: [in] key_material Key material to be imported into the module. [in] phys_location Physical location into which to import key. [out] key_ref Reference to newly imported key. Returns: Lanz & Novikov Expires January 8, 2011 [Page 97] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_PHYSICAL_LOC, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_TRUST_ANCHOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SymKeyManager::import_key_via_fill() CICM::Status import_key_via_fill( in CICM::LocalPort fill_port, out CICM::SymKey key_ref ); Initiate the import of key material via a key fill interface. Remarks: In some cases, a key fill device can initiate and effect the filling of key into a module completely independent of the host and thus any API control. In such cases, the host will utilize the CICM::SymKeyManager::get_key_by_id, CICM::SymKeyManager:: get_key_by_phys_location, or CICM::SymKeyManager:: get_key_last_filled methods after the key fill has completed to enable future reference to the key. Keys may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the key prior to use. Key attributes may optionally be set to create or supplement key metadata. Warning: This method SHALL be unimplemented if CICM::SymKeyManager:: import_key_via_fill_into_phys_location is implemented. Parameters: [in] fill_port Port of the key fill interface. [out] key_ref Reference to newly imported key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_MALFORMED, Lanz & Novikov Expires January 8, 2011 [Page 98] Internet-Draft CICM July 2010 S_KEY_METADATA_MALFORMED, S_KEY_FILL_DEVICE_NOT_CONNECTED, S_KEY_FILL_NOT_INITIATED, S_KEY_TRUST_ANCHOR, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SymKeyManager::import_key_via_fill_into_phys_location() CICM::Status import_key_via_fill_into_phys_location( in CICM::LocalPort fill_port, in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); Initiate the import of key material into a specific key physical location via a key fill interface. Remarks: In some cases, a key fill device can initiate and effect the filling of key into a module completely independent of the host and thus any API control. In such cases, the host will utilize the CICM::SymKeyManager::get_key_by_id, CICM::SymKeyManager:: get_key_by_phys_location, or CICM::SymKeyManager:: get_key_last_filled methods after the key fill has completed to enable future reference to the key. Keys may be imported into a module as wrapped entities, necessitating the use of CICM::Key::unwrap to decrypt the key prior to use. Key attributes may optionally be set to create or supplement key metadata. Warning: This call should only be used when a module utilizes a key storage model that requires keys of particular types to be stored in specific locations or in situations where keys are tied to module capabilities based upon physical location of the key. Because of the architectural knowledge of a module required, its use is highly discouraged because it virtually guarantees that code using it will be incompatible with other dissimilar modules. This method SHALL be unimplemented if CICM::SymKeyManager:: import_key_via_fill is implemented. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 99] Internet-Draft CICM July 2010 [in] fill_port Port of the key fill interface. [in] phys_location Physical location into which to import key. [out] key_ref Reference to newly imported key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_PHYSICAL_LOC, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_KEY_FILL_DEVICE_NOT_CONNECTED, S_KEY_FILL_NOT_INITIATED, S_KEY_TRUST_ANCHOR, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SymKeyManager::generate_key() CICM::Status generate_key( in CICM::SymEncrAlgorithmId algorithm, out CICM::SymKey key_ref ) Generate a symmetric key compatible with the characteristics of the specified algorithm. Parameters: [in] algorithm Desired algorithm of resulting symmetric key. [out] key_ref Reference to newly generated key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_INSUFFICIENT_ENTROPY Lanz & Novikov Expires January 8, 2011 [Page 100] Internet-Draft CICM July 2010 Method CICM::SymKeyManager::derive_key() CICM::Status derive_key( in CICM::CharString password, in CICM::Buffer salt, in CICM::UInt32 iteration_count, in CICM::HashAlgorithmId hash_algorithm, in CICM::SymEncrAlgorithmId algorithm, out CICM::SymKey key_ref ); Derives a symmetric key from a password and other parameters using a password-based key derivation function (PBKDF). Parameters: [in] password Password for conversion into a cryptographic key. [in] salt Binary salt value. [in] iteration_count Positive integer representing number of iterations to apply to hashing algorithm. [in] hash_algorithm Hash function applied to derive key. [in] algorithm Desired algorithm/mode of resulting symmetric key. [out] key_ref Reference to newly derived key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PASSWORD_INVALID, S_PASSWORD_INVALID_CHAR, S_PASSWORD_INVALID_LEN, S_SALT_INVALID, S_ITERATION_COUNT_INVALID Lanz & Novikov Expires January 8, 2011 [Page 101] Internet-Draft CICM July 2010 Method CICM::SymKeyManager::derive_deterministic_key() CICM::Status derive_deterministic_key( in CICM::SymKey key_prod_key, in CICM::CharString shared_secret, in CICM::SymEncrAlgorithmId algorithm, out CICM::SymKey key_ref ); Derives a symmetric key using a distributed deterministic key generation scheme. Remarks: This may be used by peers in an ad-hoc group who initially only share a key production key (KPK) but are subsequently able to share an additional secret. Parameters: [in] key_prod_key Key production key. [in] shared_secret Text-based secret sharable amongst peers in a group. [in] algorithm Desired algorithm/mode of resulting symmetric key. [out] key_ref Reference to newly derived key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_PASSWORD_INVALID, S_PASSWORD_INVALID_CHAR, S_PASSWORD_INVALID_LEN 3.4.3.2. Interface CICM::SymKey Interface CICM::SymKey interface SymKey : CICM::Key { CICM::SymKey serves as a reference to a symmetric key contained within a module and supports operations on symmetric keys, including key conversion, updating, wrapping, and unwrapping. Lanz & Novikov Expires January 8, 2011 [Page 102] Internet-Draft CICM July 2010 3.4.3.2.1. CICM::SymKey Inheritance CICM::SymKey inherits from: CICM::Key. 3.4.3.2.2. CICM::SymKey Types and Constants Type CICM::SymKey::Usage typedef CICM::UInt32 Usage; Symmetric key usage types. Constant CICM::SymKey::C_USAGE_GENERATE_KEYSTREAM const CICM::SymKey::Usage C_USAGE_GENERATE_KEYSTREAM = 0x0000601A; Key intended for generating keystream. Constant CICM::SymKey::C_USAGE_KEY_PRODUCTION_KEY const CICM::SymKey::Usage C_USAGE_KEY_PRODUCTION_KEY = 0x0000601C; Key intended for producing other keys. Constant CICM::SymKey::C_USAGE_MESSAGE_AUTHENTICATION_CODE const CICM::SymKey::Usage C_USAGE_MESSAGE_AUTHENTICATION_CODE = 0x0000601F; Key intended for computing a Message Authentication Code. Constant CICM::SymKey::C_USAGE_SYM_DATA_ENCIPHERMENT const CICM::SymKey::Usage C_USAGE_SYM_DATA_ENCIPHERMENT = 0x00006020; Key intended for enciphering data. Constant CICM::SymKey::C_USAGE_SYM_KEY_ENCIPHERMENT const CICM::SymKey::Usage C_USAGE_SYM_KEY_ENCIPHERMENT = 0x00006023; Key intended for enciphering other keys. 3.4.3.2.3. CICM::SymKey Attributes Attribute CICM::SymKey::update_count readonly attribute CICM::UInt32 update_count; Key update count. Lanz & Novikov Expires January 8, 2011 [Page 103] Internet-Draft CICM July 2010 3.4.3.2.4. CICM::SymKey Methods Method CICM::SymKey::update() CICM::Status update(); Cryptographically update the key using the key's native algorithm. The update modifies the existing key. Remarks: The new update count resulting from a call to this method is available as an attribute of the key object. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_WRAPPED, S_KEY_UPDATE_MAX, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::SymKey::update_with_algo for the version of this method that accepts an algorithm parameter. Method CICM::SymKey::update_with_algo() CICM::Status update_with_algo( in CICM::SymEncrAlgorithmId algorithm ); Cryptographically update the key using the specified key update algorithm. The update modifies the existing key. Remarks: The new update count resulting from a call to this method is available as an attribute of the key object. Parameters: [in] algorithm Cryptographic algorithm/mode to use to effect the key update. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, Lanz & Novikov Expires January 8, 2011 [Page 104] Internet-Draft CICM July 2010 S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_WRAPPED, S_KEY_UPDATE_MAX, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::SymKey::update for the version of this method that does not require an algorithm to be specified. Method CICM::SymKey::wrap_and_copy() CICM::Status wrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::SymKey wrapped_key ); Instruct module to wrap key, resulting in two keys, the original unwrapped key and the newly wrapped key. Parameters: [in] kek Reference to key encryption key. [in] algorithm Key wrap algorithm/mode used to wrap key. [out] wrapped_key Reference to resulting wrapped key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_CLASSIFICATION, S_KEY_WRAPPED, S_KEY_NOT_WRAPPABLE, S_KEY_WRAPPED_EXISTS, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::AsymKey::wrap_and_copy for the asymmetric version of this method. Lanz & Novikov Expires January 8, 2011 [Page 105] Internet-Draft CICM July 2010 Method CICM::SymKey::unwrap_and_copy() CICM::Status unwrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::SymKey unwrapped_key ); Instruct module to unwrap key, resulting in two keys, the original wrapped key and the newly unwrapped key. Parameters: [in] kek Reference to key decryption key. [in] algorithm Key wrap algorithm/mode used to unwrap key. [out] unwrapped_key Reference to resulting unwrapped key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_INCOMPATIBLE, S_KEY_CLASSIFICATION, S_KEY_UNWRAPPED_EXISTS, S_KEY_MALFORMED, S_KEY_METADATA_MALFORMED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::AsymKey::unwrap_and_copy for the asymmetric version of this method. Method CICM::SymKey::validate_key_usage() CICM::Status validate_key_usage( in CICM::SymKey::Usage usage_type, out CICM::Key::UsageStatus valid ); Validate that this key may be used for a specific purpose. Remarks: In some cases, a given key can be used for multiple purposes. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 106] Internet-Draft CICM July 2010 [in] usage_type Specific purpose to validate. [out] valid Indiciates if the key may be used for the specified purpose. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT See also: CICM::AsymKey::validate_key_usage for the asymmetric version of this method. 3.4.3.3. Interface CICM::SymKeyIterator Interface CICM::SymKeyIterator interface SymKeyIterator : CICM::Iterator { CICM::SymKeyIterator supports retrieving a reference to each usable symmetric key on a module. CICM::SymKeyIterator constructs the CICM::SymKey interface. 3.4.3.3.1. CICM::SymKeyIterator Inheritance CICM::SymKeyIterator inherits from: CICM::Iterator. 3.4.3.3.2. CICM::SymKeyIterator Methods Method CICM::SymKeyIterator::get_next() CICM::Status get_next( out CICM::SymKey sym_key_ref ); Returns a reference to the next symmetric key. Remarks: Use CICM::Iterator::has_next to determine if additional elements exist. Parameters: [out] sym_key_ref Reference to next symmetric key. Lanz & Novikov Expires January 8, 2011 [Page 107] Internet-Draft CICM July 2010 Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.4.4. Key Protocol The key management capabilities described here support certain key management protocols, including key establishment/distribution protocols such as Diffie-Hellman, EC-DH, and EC-MQV; trust anchor management protocols; the importation of key white lists (acceptable keys) or black lists (revoked keys or keys restricted administratively); and the execution of remote key functions. These key protocol IDL interfaces initiate a key agreement protocol between two or more entities to establish a secret key over an insecure communications channel. CICM channel negotiators (CICM::Negotiator) similarly initiate a key agreement protocol with a remote entity, but this typically results in an ephemeral key, in contrast to these key protocol interfaces which result in a persistent symmetric key that can be used by a variety of key management and channel management functions. For the purposes of these key protocol-related interfaces, a client program using the CICM API is only an intermediary in a key management protocol being conducted between a cryptographic module and other participants in a protocol session. In this role, a client program determines which module(s) should be involved and conveys the protocol messages, but otherwise does not participate in the protocol session. The client may be responsible for determining which key agreement protocol to use as well as for the reliable transport of messages passed between the peer entities. The interactions that comprise a protocol session in its entirety may entail a number of exchanges among the participants in the protocol. Any results from calls to key protocol methods during the course of the protocol exchange must be communicated to the appropriate peer entity by the caller. The progress, success, or failure of the protocol session is determined by the modules and other active participants in the interaction. CICM key protocol functionality is exported via two independent objects: CICM::KeyProtocolSender for protocol messages inbound to the module and CICM::KeyProtocolReceiver for messages outbound from the module. Access to each respective object is available via CICM:: SymKeyManager::key_protocol_sender and CICM::SymKeyManager:: key_protocol_receiver. Lanz & Novikov Expires January 8, 2011 [Page 108] Internet-Draft CICM July 2010 The key protocol methods support protocol sessions that may be long- term interactions potentially extending over several invocations of the controlling client program. To allow for this possibility, KeyProtocolReceiver::get_from_module may be used to "query" a module to determine if a response is ready and, if so, to retrieve response traffic (including current session status information) from the module. Thus, a single response from the module may take the form of a number of queries by the client program, with any productive response deferred until the module is ready: query, response is C_PROTOCOL_RECEIVE_BUSY query, response is C_PROTOCOL_RECEIVE_BUSY ... query, response is C_PROTOCOL_RECEIVE_BUSY query, results returned, response is C_PROTOCOL_RECEIVE_OKAY In the example above, the client program expects either a "condition" update from the module as part of the protocol session, or the most recent results from the active session. Thus, the client program queries the module periodically until it is ready to produce a response. The traffic relayed by these functions is part of a specific protocol session. The protocol governing this session is specified with the protocol parameter, either the value CICM::IMPLICIT_PROTOCOL_ID, denoting that the message itself indicates the protocol, or a unique protocol identifier designating the protocol directly. If the protocol parameter is CICM::IMPLICIT_PROTOCOL_ID but the message does not indicate the protocol, then the method fails, returning the CICM::S_PROTO_UNDETERMINED error status. The initial message in a protocol exchange can be generated either by the cryptographic module or some other party, including some party in a key management infrastructure or the client program itself. If the initial message is generated by the cryptographic module, a two-step process allows the message to be retrieved from the module: 1. The module notifies the client program that a protocol message is available to be retrieved via the CICM module event listener facility (this requires a CICM::ModuleEventListener:: C_MODULE_KEY_PROTO_MESSAGE to have been previously registered by the client program). The listener facility provides an opaque buffer as part of the notification that is passed to the module in the following step to identify the specific protocol message Lanz & Novikov Expires January 8, 2011 [Page 109] Internet-Draft CICM July 2010 involved. 2. The CICM::KeyProtocolReceiver::get_from_module method is used to retrieve the message from the module. If the initial message is generated by some other party, the CICM:: KeyProtocolSender::put_into_module method is used to convey the message into the module. Any key protocol-related key fill device interactions are outside the scope of the API. Individual protocol events do not require a transaction identifier. Instead, each message itself indicates where it is to be forwarded (i.e. which module or other participant is to receive the message). This means that the client program must be capable of determining which module to associate with a given message, possibly by examining metadata conveyed with the message. 3.4.4.1. Participants in the Interaction There are three types of participants in a protocol session using the key protocol functionality: o The cryptographic modules themselves. Note that although these methods work with modules individually, there may in fact be several modules involved in a single protocol session, e.g., to deliver the same key material to several modules available to a host or in a net. o The other participants (generally key management infrastructure components) that also take an active part in the session, i.e., those that generate and/or consume messages exchanged in the session (perhaps with status indications embedded in the messages). All active participants, to the extent they find necessary, maintain and update internal status as the session continues. o The intermediary client program that conveys the messages among the active participants in the session (the cryptographic modules themselves and the other active participants in the session). Note that a module may generate a message for transmission to another module as part of the protocol session. The CICM API is the interface between the intermediary client programs and the cryptographic modules. All exchanges for a specific protocol session between a given module and other modules or other active participants (Party 1, ..., Party N) are mediated by the Lanz & Novikov Expires January 8, 2011 [Page 110] Internet-Draft CICM July 2010 intermediary client program using CICM. Although the client program does not directly participate in the protocol session, the client program may be asked during the negotiation process to display identifying information about the remote party in the protocol to a human user who must determine if the remote party is the expected remote party in the protocol and, if so, must positively acknowledge this assertion to allow the protocol to continue. Some protocol sessions will not require this peer validation interaction (e.g., validation of the peer using a trust anchor is deemed sufficient or an external trusted display handles the user interaction). Except for recognizing the specific role of the cryptographic modules themselves, assignment of roles in the protocol to the active participants is out of scope for this document. 3.4.4.2. Return Status, Condition, and Session Status The key protocol interfaces convey messages between modules and the intermediary client program but do not conduct the actual protocol session. However, the client program still needs to know something about the state of the session, so the key protocol methods impart three types of status information: o Status return value indicates the status of the method call itself. In the event of a failure, it gives an indication of what the failure was. Note that the returned value does not indicate the state of the protocol session itself: It could report a faulty call (e.g., an invalid protocol identifier) even when the protocol session is still making progress, and it could report a successful exchange with the cryptographic module even when the module decides that the session has reached an error condition. o The returned condition indication summarizes for the client program the state of the session, perhaps to be used along with other information to suggest what the client program should do next as part of the current protocol session. o The current or resulting status of the protocol session is embedded in the message conveyed between the client program and the active participants. The client program typically will not interpret the contents of this message; instead, it will simply convey the message to the appropriate active participants, who may then interpret the status in the message and take the appropriate next step in the protocol. Lanz & Novikov Expires January 8, 2011 [Page 111] Internet-Draft CICM July 2010 3.4.4.3. Generic Scenario The following diagram presents a generic scenario for a key protocol session. This diagram does not show message exchanges with any other active participants, since they are out of scope for the API. Note that, although responses from the module to the intermediary client program are represented as arrows in the diagram, in fact, the module actually conveys the response only when the client program explicitly asks or is prompted by an event to ask for it. {FIGURE REMOVED} Figure 25. Generic Scenario for Key Protocol Session Initiated by a Key Infrastructure Component The notional key infrastructure-initiated message exchanges are as follows: o Event "A1": Start key protocol - The client program receives the first protocol message from a key infrastructure component and sends it to the module using KeyProtocolSender::put_into_module. The returned condition indicates that the protocol session is C_PROTOCOL_SEND_OKAY. o Event "M1": Successful start to key protocol - The client program requests the module's response using KeyProtocolReceiver:: get_from_module. This response is the module's first message in this exchange and includes the current status of the session. Multiple queries could respond with a BUSY condition before a C_PROTOCOL_SEND_OKAY condition is finally returned. The C_PROTOCOL_SEND_OKAY condition indicates that the session is in progress and a response message has been returned. The client program is responsible for forwarding the resulting response message to another active protocol participant. o Event "A2": Send protocol message - The client program forwards the next message in the protocol sequence received from the infrastructure component to the module using the KeyProtocolSender::put_into_module method. The returned condition indicates that the protocol session is C_PROTOCOL_SEND_OKAY. o Event "M2": Message C_PROTOCOL_SEND_OKAY, more pending - The module provides another message in this exchange using KeyProtocolReceiver::get_from_module. The returned condition indicates that the protocol session is C_PROTOCOL_SEND_OKAY and a responding message has been returned. Lanz & Novikov Expires January 8, 2011 [Page 112] Internet-Draft CICM July 2010 o Event "An": Send protocol message - The client program forwards what is ultimately the last message in the protocol sequence to the module using KeyProtocolSender::put_into_module. o Event "Mn": Message C_PROTOCOL_SEND_OKAY, protocol done - The module provides the corresponding last message in this exchange when the client program queries the module using KeyProtocolReceiver::get_from_module. The returned condition indicates that the protocol session is DONE and the last responding message in this protocol session has been returned. As shown here, the module determines (or at least reports to the client program) when the protocol session is done. Another active participant could plausibly make this determination. 3.4.4.4. Key Agreement Example Using Diffie-Hellman Protocol The following example depicts a notional key infrastructure ("Entity A") initiating an authenticated Diffie-Hellman Discrete Logarithm (DH-DL) key agreement protocol with a cryptographic module ("Entity B"). A host running a client program using CICM for interactions with the module interposes itself between the key infrastructure and the module. {FIGURE REMOVED} Figure 26. Example of a Two-key Diffie-Hellman Discrete Logarithm (DH-DL) Key Agreement Protocol Initiated by a Key Infrastructure The following are the steps required to use CICM in the protocol example between a notional key infrastructure ("Entity A") and a cryptographic module ("Entity B"): 1. The following are prepositioned at both communicating elements: * Domain parameters g and p. * Digital certificate. * Signature verification key required to validate the certificate of the other entity. 2. "Entity A" generates random value a. 3. "Entity A" calculates A=g^a mod p. 4. "Entity A" signs the value A calculated above using its static private key whose corresponding static public key is contained in its certificate. Lanz & Novikov Expires January 8, 2011 [Page 113] Internet-Draft CICM July 2010 5. "Entity A" sends the signed value A and cert-A to the client program on the intermediary host as an opaque binary buffer. 6. The client program on the intermediary host calls KeyProtocolSender::put_into_module to send the opaque binary buffer received by the client program to the module; if a CICM:: KeyProtocolSender::C_PROTOCOL_SEND_DISPLAY condition is returned from this call, the following steps SHOULD be performed (the steps do not appear in the diagram): A. "Entity A" calls CICM::Negotiator::get_remote_info to retrieve information about the remote peer; this information (including name/organization and classification level) are extracted from cert-B and returned in CICM::PeerInfo. B. The client program on the intermediary host displays the identifying information returned above in CICM::PeerInfo to a human user and asks for positive acknowledgement that the entity initiating the protocol is in fact a legal entity to initiate the protocol. C. If the human user does not recognize the remote entity and declines to give positive acknowledgement, the client program abandons the protocol. In this example, positive acknowledgement is given, and the client program calls CICM::KeyProtocolReceiver::get_from_module to request a protocol response. 7. "Entity B" generates random value b. 8. "Entity B" calculates B=g^b mod p, using parameters g and p that it previously agreed it would use when initiating a protocol exchange with "Entity A." 9. "Entity B" signs the value B calculated above using its static private key whose corresponding static public key is contained in its certificate. 10. "Entity B" returns an opaque binary buffer containing its signed value B and cert-B to the caller of KeyProtocolReceiver:: get_from_module with a condition of DONE. 11. The client program on the intermediary host sends the opaque binary buffer to "Entity A". 12. Both entities verify their peer's certificate is valid. Lanz & Novikov Expires January 8, 2011 [Page 114] Internet-Draft CICM July 2010 13. "Entity A" calculates K=B^a mod p. 14. "Entity B" calculates K=A^b mod p. 15. Both entities now share a symmetric key K. 3.4.4.5. Protocol Support Examples As previously stated, these methods support a wide range of key management protocols. The following is a notional list of such protocols with a description of their intended usage: o Key agreement/distribution protocols - Key material can be distributed and keys can be agreed upon using the DH-DL, EC-DH, EC-MQV, or related protocols. o Remote key functions - Messages containing key-related commands (i.e., zeroize, rekey) requiring authentication by the module prior to execution may be presented using these functions. o Trust anchor management protocols - Trust anchor management commands and data may be sent as opaque data elements which are interpreted by the module in a protocol-specific manner. o Key revocation messages - Opaque data elements identifying certificates associated with keys which have been revoked are accepted. The ability to handle a list of revoked keys allows a module to prevent further usage of these keys, including performing key agreement with an entity that is known to have been compromised or no longer possesses the roles or affiliations described in the certificate. 3.4.4.6. Interface CICM::KeyProtocolSender Interface CICM::KeyProtocolSender interface KeyProtocolSender : CICM::Negotiator { CICM::KeyProtocolSender supports sending key management protocol- related messages into a module. 3.4.4.6.1. CICM::KeyProtocolSender Inheritance CICM::KeyProtocolSender inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 115] Internet-Draft CICM July 2010 3.4.4.6.2. CICM::KeyProtocolSender Types and Constants Type CICM::KeyProtocolSender::Condition typedef CICM::UInt32 Condition; Condition values summarize for the client program the state of the session. This information can be used along with other information to suggest what the client program should do next as part of the current protocol session. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_OKAY const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_OKAY = 0x00006045; Denotes that the session is in progress and a response message is available. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_DONE const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_DONE = 0x00006046; Denotes that the session terminated successfully. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_ERROR const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_ERROR = 0x00006049; Denotes that the session terminated with an error condition. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_DISPLAY const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_DISPLAY = 0x0000604A; As with the C_PROTOCOL_SEND_OKAY condition, denotes that the session is in progress and a response message is available, but additionally denotes that identification information extracted from the remote certificate is available via a call to the CICM::Negotiator:: get_remote_info method; the information retrieved from a call to this method must be displayed to a human user on the host and validated before the protocol should be allowed to continue. Note that a trusted display may be employed by the module for the same purpose but, because no API interaction would be involved, the C_PROTOCOL_SEND_DISPLAY condition would not be returned. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_ABORTED const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_ABORTED = 0x0000604C; Denotes that the human user reviewing the remote peer information chose to reject it and abort the protocol. Lanz & Novikov Expires January 8, 2011 [Page 116] Internet-Draft CICM July 2010 Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_MESSAGE_INVALID const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_MESSAGE_INVALID = 0x0000604F; Denotes that the conveyed message was found to be invalid for the protocol. This event does not terminate the protocol session. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_MESSAGE_INTEGRITY const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_MESSAGE_INTEGRITY = 0x00006051; Denotes that the conveyed message failed one or more integrity checks used in the protocol. This event does not terminate the protocol session. Constant CICM::KeyProtocolSender::C_PROTOCOL_SEND_PROTOCOL_VIOLATION const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_PROTOCOL_VIOLATION = 0x00006052; Denotes that a message or attempted action unexpected at the current point in the protocol session was noted. This event does not terminate the protocol session. 3.4.4.6.3. CICM::KeyProtocolSender Methods Method CICM::KeyProtocolSender::put_into_module() CICM::Status put_into_module( in CICM::ProtocolId protocol, in CICM::Buffer message, out CICM::KeyProtocolSender::Condition condition ); Initiate or recommence a key management protocol session, forwarding a message to the cryptographic module. If the C_PROTOCOL_SEND_DISPLAY condition results, the get_remote_info method should be called to retrieve identity information about the remote peer for display to and validation by the responsible user before the protocol negotiation is allowed to continue. Remarks: The format of the conveyed message is not defined by CICM. If the client program must be capable of generating the message, then the Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Parameters: [in] protocol Designate the protocol to be followed for this session; the same value must be used for this parameter for all Lanz & Novikov Expires January 8, 2011 [Page 117] Internet-Draft CICM July 2010 calls to this method or to get_from_module, as part of the same protocol session. [in] message Message conveyed to the module as part of the current protocol session. [out] condition Condition of the current protocol session; the calling client program must interpret this value to determine what its next action must be. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED See also: CICM::KeyProtocolSender::put_into_module_algo for the version of this method that accepts an algorithm. Method CICM::KeyProtocolSender::put_into_module_algo() CICM::Status put_into_module_algo( in CICM::ProtocolId protocol, in CICM::Buffer message, in CICM::SymEncrAlgorithmId algorithm, out CICM::KeyProtocolSender::Condition condition ); Initiate or recommence a key management protocol session, forwarding a message to the cryptographic module. If the C_PROTOCOL_SEND_DISPLAY condition results, the get_remote_info method should be called to retrieve identity information about the remote peer for display to and validation by the responsible user before the protocol negotiation is allowed to continue. This method differs from KeyProtocolSender::put_into_module in that it enables the caller to specify the desired algorithm of the resulting symmetric key. Remarks: The format of the conveyed message is not defined by CICM. If the client program must be capable of generating the message, then the Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a Lanz & Novikov Expires January 8, 2011 [Page 118] Internet-Draft CICM July 2010 module developer-specific format implemented by the module for this datatype. Parameters: [in] protocol Designate the protocol to be followed for this session; the same value must be used for this parameter for all calls to this method or to get_from_module, as part of the same protocol session. [in] message Message conveyed to the module as part of the current protocol session. [in] algorithm Algorithm/mode of resulting symmetric key. [out] condition Condition of the current protocol session; the calling client program must interpret this value to determine what its next action must be. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED See also: CICM::KeyProtocolSender::put_into_module for the version of this method that does not require an algorithm. 3.4.4.7. Interface CICM::KeyProtocolReceiver Interface CICM::KeyProtocolReceiver interface KeyProtocolReceiver { CICM::KeyProtocolReceiver supports receiving key management protocol- related messages from a module. CICM::KeyProtocolReceiver constructs the CICM::SymKey interface. Lanz & Novikov Expires January 8, 2011 [Page 119] Internet-Draft CICM July 2010 3.4.4.7.1. CICM::KeyProtocolReceiver Types and Constants Type CICM::KeyProtocolReceiver::Condition typedef CICM::UInt32 Condition; Condition values summarize for the client program the state of the session. This information can be used along with other information to suggest what the client program should do next as part of the current protocol session. Constant CICM::KeyProtocolReceiver::C_PROTOCOL_RECEIVE_OKAY const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_OKAY = 0x00006034; Denotes that the session is in progress and a response message has been returned. Constant CICM::KeyProtocolReceiver::C_PROTOCOL_RECEIVE_DONE const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_DONE = 0x00006037; Denotes that the session terminated successfully. Constant CICM::KeyProtocolReceiver::C_PROTOCOL_RECEIVE_BUSY const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_BUSY = 0x00006038; Denotes that the session is in progress but no response message or error indication is available at the current time; in this case, the client program must make additional calls to CICM:: KeyProtocolReceiver::get_from_module to determine when the response message has become available and retrieve the message. Constant CICM::KeyProtocolReceiver::C_PROTOCOL_RECEIVE_ERROR const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_ERROR = 0x0000603B; Denotes that the session terminated with an error condition and a response message has been returned. Constant CICM::KeyProtocolReceiver::C_PROTOCOL_RECEIVE_ABORTED const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_ABORTED = 0x0000603D; Denotes that the human user reviewing the remote peer information chose to reject it and abort the protocol. Constant CICM::KeyProtocolReceiver:: C_PROTOCOL_RECEIVE_MESSAGE_INVALID const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_MESSAGE_INVALID = 0x0000603E; Denotes that the conveyed message was found to be invalid for the protocol. This event does not terminate the protocol session. Lanz & Novikov Expires January 8, 2011 [Page 120] Internet-Draft CICM July 2010 Constant CICM::KeyProtocolReceiver:: C_PROTOCOL_RECEIVE_MESSAGE_INTEGRITY const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_MESSAGE_INTEGRITY = 0x00006040; Denotes that the conveyed message failed one or more integrity checks used in the protocol. This event does not terminate the protocol session. Constant CICM::KeyProtocolReceiver::C_PROTOCOL_RECEIVE_VIOLATION const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_VIOLATION = 0x00006043; Denotes that a message or attempted action unexpected at the current point in the protocol session was noted. This event does not terminate the protocol session. 3.4.4.7.2. CICM::KeyProtocolReceiver Methods Method CICM::KeyProtocolReceiver::abort() CICM::Status abort(); Abort negotiation. Remarks: This method may be called at any point in the negotiation process for any reason. However, it must be called in the event the identification information for the remote peer does not correspond to the expected peer. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_NOT_IN_PROGRESS Method CICM::KeyProtocolReceiver::get_from_module() CICM::Status get_from_module( in CICM::ProtocolId protocol, out CICM::Buffer message, out CICM::KeyProtocolReceiver::Condition condition ); Initiate or recommence a key management protocol session, soliciting a response from the cryptographic module. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 121] Internet-Draft CICM July 2010 The format of the conveyed message is not defined by CICM. If the client program must be capable of interpreting the contents of the message, then the Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for this datatype. Parameters: [in] protocol Designate the protocol to be followed for this session; the same value must be used for this parameter for all calls to this method or to CICM::KeyProtocolSender:: put_into_module, as part of the same protocol session. [out] message Message returned from the module as part of the current protocol session; message may be of length zero. [out] condition Condition of the current protocol session; the calling client program must interpret this value to determine what its next action must be. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED Method CICM::KeyProtocolReceiver::get_key() CICM::Status get_key( out CICM::SymKey key_ref ); At successful conclusion of a key agreement/distribution protocol session (when the returned condition is C_PROTOCOL_RECEIVE_DONE), this method is called to retrieve a reference to the key resulting from the session. Remarks: Note that, in those cases where the protocol session does not result in a key (e.g., a key revocation message, key white list or black list is presented to the module via this interface), calling this method will result in an CICM::S_INVALID_STATE error. Lanz & Novikov Expires January 8, 2011 [Page 122] Internet-Draft CICM July 2010 Parameters: [out] key_ref Reference to key resulting from a successful protocol session. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_NOT_IN_PROGRESS 3.5. Channel Management 3.5.1. Channel Abstractions 3.5.1.1. Interface CICM::ChannelManager Interface CICM::ChannelManager interface ChannelManager : CICM::Answer::ChannelManager, CICM::BypassRead::ChannelManager, CICM::BypassWrite::ChannelManager, CICM::Coprocessor::ChannelManager, CICM::Decrypt::ChannelManager, CICM::DecryptBypass::ChannelManager, CICM::Duplex::ChannelManager, CICM::Emit::ChannelManager, CICM::Encrypt::ChannelManager, CICM::EncryptBypass::ChannelManager { CICM::ChannelManager supports the creation and negotiation of cryptographic channels. It is accessed from CICM::CryptoModule via the CICM::CryptoModule::channel_manager attribute. CICM:: ChannelManager enables a variety of different channel types to be constructed. Note: Conforming implementations need only implement one or more of the ChannelManager's dependencies thereby limiting which negotiators, controllers, streams, and channels are available. Lanz & Novikov Expires January 8, 2011 [Page 123] Internet-Draft CICM July 2010 3.5.1.1.1. CICM::ChannelManager Inheritance CICM::ChannelManager inherits from: CICM::Answer::ChannelManager, CICM::BypassRead::ChannelManager, CICM::BypassWrite::ChannelManager, CICM::Coprocessor::ChannelManager, CICM::Decrypt::ChannelManager, CICM::DecryptBypass::ChannelManager, CICM::Duplex::ChannelManager, CICM::Emit::ChannelManager, CICM::Encrypt::ChannelManager and CICM:: EncryptBypass::ChannelManager. 3.5.1.1.2. CICM::ChannelManager Methods Method CICM::ChannelManager::create_controller_group() CICM::Status create_controller_group( out CICM::ControllerGroup controller_group_ref ); Creates a CICM::ControllerGroup to group controllers and conduits together. Parameters: [out] controller_group_ref Reference to the created controller group. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.5.1.2. Interface CICM::Channel Interface CICM::Channel interface Channel { Defines the logical path through the module. Interface from which all conduit, streams and controllers inherit. Channels are created via the CICM::ChannelManager interface. 3.5.1.2.1. CICM::Channel Attributes AttributeCICM::Channel::event_manager readonly attribute CICM::ChannelEventManager event_manager; Provides access to the event manager. Lanz & Novikov Expires January 8, 2011 [Page 124] Internet-Draft CICM July 2010 3.5.1.3. Interface CICM::Conduit Interface CICM::Conduit interface Conduit : CICM::Controller, CICM::Stream { Interface from which all other conduits are inherited. A conduit is a combination of a stream and controller. 3.5.1.3.1. CICM::Conduit Inheritance CICM::Conduit inherits from: CICM::Controller and CICM::Stream. 3.5.1.4. Interface CICM::Controller Interface CICM::Controller interface Controller : CICM::Channel { Interface from which all other controllers are inherited. Controls general characteristics of a cryptographic transformation, but does not provide data to be transformed. Remarks: There may be cases in which a client program wishes to delegate responsibility for sending or receiving data from the module to another process while retaining the authority to manage the channel. To support this task, both processes must share a known local port. The client-program responsible for controlling the channel creates a CICM::Controller of the appropriate type after which the corresponding CICM::Stream may be obtained by the second process. A stream is tied to the specific controller that configured the channel by a common port value. 3.5.1.4.1. CICM::Controller Inheritance CICM::Controller inherits from: CICM::Channel. 3.5.1.4.2. CICM::Controller Methods Method CICM::Controller::destroy() CICM::Status destroy(); Destroys the controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, Lanz & Novikov Expires January 8, 2011 [Page 125] Internet-Draft CICM July 2010 S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.5.1.5. Interface CICM::Stream Interface CICM::Stream interface Stream : CICM::Channel {}; Interface from which all streams inherit. Streams manage the flow of data on a channel, but not its attributes. 3.5.1.5.1. CICM::Stream Inheritance CICM::Stream inherits from: CICM::Channel. 3.5.2. Conduit Abstractions 3.5.2.1. Interface CICM::AbstractMACConduit Interface CICM::AbstractMACConduit interface AbstractMACConduit : CICM::Conduit { Interface from which other MAC conduits are inherited. 3.5.2.1.1. CICM::AbstractMACConduit Inheritance CICM::AbstractMACConduit inherits from: CICM::Conduit. 3.5.2.1.2. CICM::AbstractMACConduit Attributes AttributeCICM::AbstractMACConduit::mac_key readonly attribute CICM::SymKey mac_key; The key used for computing the MAC. AttributeCICM::AbstractMACConduit::mac_algorithm readonly attribute CICM::SymMacAlgorithmId mac_algorithm; The algorithm used to MAC the data. 3.5.2.1.3. CICM::AbstractMACConduit Methods Method CICM::AbstractMACConduit::end_get_mac() CICM::Status end_get_mac( out CICM::MACBuffer mac ); Direct the module to compute and output the MAC value, and reset the channel to accept additional data. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 126] Internet-Draft CICM July 2010 [out] mac Computed MAC value. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.2.2. Interface CICM::AbstractSignConduit Interface CICM::AbstractSignConduit interface AbstractSignConduit : CICM::Conduit { Interface from which other sign conduits are inherited. 3.5.2.2.1. CICM::AbstractSignConduit Inheritance CICM::AbstractSignConduit inherits from: CICM::Conduit. 3.5.2.2.2. CICM::AbstractSignConduit Attributes AttributeCICM::AbstractSignConduit::sign_key readonly attribute CICM::AsymKey sign_key; Key used for signing the data. AttributeCICM::AbstractSignConduit::sign_algorithm readonly attribute CICM::AsymSigAlgorithmId sign_algorithm; Algorithm used to sign the data. 3.5.2.2.3. CICM::AbstractSignConduit Methods Method CICM::AbstractSignConduit::end_get_signature() CICM::Status end_get_signature( out CICM::SigBuffer signature ); Direct the module to compute and output the signature, and reset the conduit to accept additional data. Parameters: [out] signature The computed signature. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, Lanz & Novikov Expires January 8, 2011 [Page 127] Internet-Draft CICM July 2010 S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.2.3. Interface CICM::AbstractVerifyConduit Interface CICM::AbstractVerifyConduit interface AbstractVerifyConduit : CICM::Conduit { Interface from which other verification conduits are inherited. 3.5.2.3.1. CICM::AbstractVerifyConduit Inheritance CICM::AbstractVerifyConduit inherits from: CICM::Conduit. 3.5.2.3.2. CICM::AbstractVerifyConduit Types and Constants Type CICM::AbstractVerifyConduit::VerifyStatus typedef CICM::UInt32 VerifyStatus; Verification status (data verifies/does not verify). Constant CICM::AbstractVerifyConduit::C_DATA_VERIFIED const CICM::AbstractVerifyConduit::VerifyStatus C_DATA_VERIFIED = 0x00006025; Data verifies. Constant CICM::AbstractVerifyConduit::C_DATA_NOT_VERIFIED const CICM::AbstractVerifyConduit::VerifyStatus C_DATA_NOT_VERIFIED = 0x00006026; Data does not verify. 3.5.2.4. Interface CICM::AbstractMACVerifyConduit Interface CICM::AbstractMACVerifyConduit interface AbstractMACVerifyConduit : CICM::AbstractVerifyConduit { Interface from which other MAC verify conduits are inherited. 3.5.2.4.1. CICM::AbstractMACVerifyConduit Inheritance CICM::AbstractMACVerifyConduit inherits from: CICM:: AbstractVerifyConduit. 3.5.2.4.2. CICM::AbstractMACVerifyConduit Attributes AttributeCICM::AbstractMACVerifyConduit::verify_key readonly attribute CICM::SymKey verify_key; Key used to verify the MAC. Lanz & Novikov Expires January 8, 2011 [Page 128] Internet-Draft CICM July 2010 AttributeCICM::AbstractMACVerifyConduit::verify_algorithm readonly attribute CICM::SymMacAlgorithmId verify_algorithm; Algorithm used to verify the data. 3.5.2.4.3. CICM::AbstractMACVerifyConduit Methods Method CICM::AbstractMACVerifyConduit::end_get_verified() CICM::Status end_get_verified( in CICM::MACBuffer mac, out CICM::AbstractVerifyConduit::VerifyStatus status ); Direct the module to compute and output the MAC verification status, and reset the channel to accept additional data for verification. Parameters: [in] mac Message authentication code. [out] status Status indicating whether or not the data verifies. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN 3.5.2.5. Interface CICM::AbstractSigVerifyConduit Interface CICM::AbstractSigVerifyConduit interface AbstractSigVerifyConduit : CICM::AbstractVerifyConduit { Interface from which other signature verification conduits are inherited. 3.5.2.5.1. CICM::AbstractSigVerifyConduit Inheritance CICM::AbstractSigVerifyConduit inherits from: CICM:: AbstractVerifyConduit. Lanz & Novikov Expires January 8, 2011 [Page 129] Internet-Draft CICM July 2010 3.5.2.5.2. CICM::AbstractSigVerifyConduit Attributes AttributeCICM::AbstractSigVerifyConduit::verify_key readonly attribute CICM::AsymKey verify_key; Key used to verify the signature. AttributeCICM::AbstractSigVerifyConduit::verify_algorithm readonly attribute CICM::AsymSigAlgorithmId verify_algorithm; Algorithm used to verify the data. 3.5.2.5.3. CICM::AbstractSigVerifyConduit Methods Method CICM::AbstractSigVerifyConduit::end_get_verified() CICM::Status end_get_verified( in CICM::SigBuffer signature, out CICM::AbstractVerifyConduit::VerifyStatus status ); Direct the module to compute and output the verification status, and reset the channel to accept additional data for verification. Parameters: [in] signature Signature. [out] status Status indicating whether or not the data verifies. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN 3.5.3. Stream Abstractions 3.5.3.1. Interface CICM::WriteStream Interface CICM::WriteStream interface WriteStream : CICM::Stream { Interface from which other streams that write data to the module inherit. 3.5.3.1.1. CICM::WriteStream Inheritance CICM::WriteStream inherits from: CICM::Stream. Lanz & Novikov Expires January 8, 2011 [Page 130] Internet-Draft CICM July 2010 3.5.3.1.2. CICM::WriteStream Types and Constants Type CICM::WriteStream::WriteStatus typedef CICM::UInt32 WriteStatus; Status of an non-blocking write. Constant CICM::WriteStream::C_WRITE_NOT_READY const CICM::WriteStream::WriteStatus C_WRITE_NOT_READY = 0x00006067; Module is not ready to receive data for writing. Constant CICM::WriteStream::C_WRITE_READY const CICM::WriteStream::WriteStatus C_WRITE_READY = 0x00006068; Module is ready to receive data for writing. 3.5.3.2. Interface CICM::ReadStream Interface CICM::ReadStream interface ReadStream : CICM::Stream { Interface from which all other streams that read data from the module inherit. 3.5.3.2.1. CICM::ReadStream Inheritance CICM::ReadStream inherits from: CICM::Stream. 3.5.3.2.2. CICM::ReadStream Types and Constants Type CICM::ReadStream::ReadStatus typedef CICM::UInt32 ReadStatus; Status of a non-blocking read. Constant CICM::ReadStream::C_READ_NOT_READY const CICM::ReadStream::ReadStatus C_READ_NOT_READY = 0x0000605E; Module does not have data ready for reading. Constant CICM::ReadStream::C_READ_READY const CICM::ReadStream::ReadStatus C_READ_READY = 0x00006061; Module has data ready for reading. 3.5.4. Controller Abstractions Lanz & Novikov Expires January 8, 2011 [Page 131] Internet-Draft CICM July 2010 3.5.4.1. Interface CICM::MultiDomainController Interface CICM::MultiDomainController interface MultiDomainController : CICM::Controller { Interface from which any other multi-domain-related controller or conduit inherits. Remarks: Provides read access to the local and remote port values associated with the controller. 3.5.4.1.1. CICM::MultiDomainController Inheritance CICM::MultiDomainController inherits from: CICM::Controller. 3.5.4.1.2. CICM::MultiDomainController Attributes AttributeCICM::MultiDomainController::local_port readonly attribute CICM::LocalPort local_port; Local port associated with this controller. AttributeCICM::MultiDomainController::remote_port readonly attribute CICM::RemotePort remote_port; Remote port associated with this controller. 3.5.4.2. Interface CICM::SymKeyController Interface CICM::SymKeyController interface SymKeyController : CICM::Controller { Interface from which all controllers using a symmetric key inherit. 3.5.4.2.1. CICM::SymKeyController Inheritance CICM::SymKeyController inherits from: CICM::Controller. 3.5.4.2.2. CICM::SymKeyController Attributes Attribute CICM::SymKeyController::key readonly attribute CICM::SymKey key; The key associated with this controller. Lanz & Novikov Expires January 8, 2011 [Page 132] Internet-Draft CICM July 2010 3.5.4.2.3. CICM::SymKeyController Methods Method CICM::SymKeyController::update_key() CICM::Status update_key(); Cryptographically update the key associated with this controller using the key's native algorithm. Remarks: To update an arbitrary key, use CICM::SymKey::update. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET See also: CICM::SymKey::update_key_with_algo for the version of this method that accepts an algorithm. Method CICM::SymKeyController::update_key_with_algo() CICM::Status update_key_with_algo( in CICM::SymEncrAlgorithmId algorithm ); Cryptographically update the key associated with this controller using the specified algorithm. Remarks: To update an arbitrary key, use CICM::SymKey::update. Parameters: [in] algorithm Cryptographic algorithm/mode to use to effect the key update. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Lanz & Novikov Expires January 8, 2011 [Page 133] Internet-Draft CICM July 2010 See also: CICM::SymKey::update_key for the version of this method that does not require an algorithm to be specified. Method CICM::SymKeyController::rollover_key() CICM::Status rollover_key(); Specify that the next pre-placed key be used with this controller. Remarks: A call to this method may be required when a key reaches the end of its specified or usable lifespan or for other reasons that require that a controller move to a new key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_NO_NEXT, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET See also: CICM::SymKey::rollover_key_with_key for the version of this method that accepts a key. Method CICM::SymKeyController::rollover_key_with_key() CICM::Status rollover_key_with_key( in CICM::SymKey next_key ); Specify the next pre-placed key to be used with this controller. Remarks: A call to this method may be required when a key reaches the end of its specified or usable lifespan or for other reasons that require that a controller move to a new key. Parameters: [in] next_key Reference to pre-placed key to use with this controller. Returns: Lanz & Novikov Expires January 8, 2011 [Page 134] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_CLASSIFICATION, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET See also: CICM::SymKey::rollover_key for the version of this Method for which the key is implicit. 3.5.4.3. Interface CICM::AsymKeyController Interface CICM::AsymKeyController interface AsymKeyController : CICM::Controller { Interface from which all controllers using an asymmetric key inherit. 3.5.4.3.1. CICM::AsymKeyController Inheritance CICM::AsymKeyController inherits from: CICM::Controller. 3.5.4.3.2. CICM::AsymKeyController Attributes AttributeCICM::AsymKeyController::key readonly attribute CICM::AsymKey key; Provides read-only access to the key associated with a controller. 3.5.4.4. Interface CICM::NegotiatedController Interface CICM::NegotiatedController interface NegotiatedController : CICM::MultiDomainController, CICM::AsymKeyController, CICM::Negotiator { Interface from which all other negotiated controllers inherit. A controller that uses a negotiated key. 3.5.4.4.1. CICM::NegotiatedController Inheritance CICM::NegotiatedController inherits from: CICM:: MultiDomainController, CICM::AsymKeyController and CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 135] Internet-Draft CICM July 2010 3.5.4.4.2. CICM::NegotiatedController Attributes AttributeCICM::NegotiatedController::negotiated_grade readonly attribute CICM::Classification negotiated_grade; Returns the grade (classification level) of the channel. 3.5.4.4.3. CICM::NegotiatedController Methods Method CICM::NegotiatedController::renegotiate() CICM::Status renegotiate(); Renegotiates the traffic encryption key with the associated peer. Remarks: In cases where the key is no longer usable, e.g. it expired or was zeroized, the session must be torn down and rebuilt. Note that renegotiation may not need to be explicitly initiated in all cases because some modules will automatically initiate a renegotiation when sensing a certain condition (e.g., key expiration, cumulative traffic volume threshold passed, etc.). Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR Method CICM::NegotiatedController::initiate_grade_change() CICM::Status initiate_grade_change( in CICM::Classification new_grade ); Requests a change of grade (classification level) for the current traffic. Parameters: [in] new_grade New grade for the traffic. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, Lanz & Novikov Expires January 8, 2011 [Page 136] Internet-Draft CICM July 2010 S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Method CICM::NegotiatedController::acknowledge_grade_change() CICM::Status acknowledge_grade_change(); Positively acknowledges the requested change of grade. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.4.5. Interface CICM::SetVectorController Interface CICM::SetVectorController interface SetVectorController : CICM::Controller { Provides access to the state vector associated with a controller. {FIGURE REMOVED} Figure 27. Interface Inheritance Diagram for SetVectorController 3.5.4.5.1. CICM::SetVectorController Inheritance CICM::SetVectorController inherits from: CICM::Controller. 3.5.4.5.2. CICM::SetVectorController Attributes AttributeCICM::SetVectorController::vec readonly attribute CICM::Vector vec; State vector associated with this controller. Lanz & Novikov Expires January 8, 2011 [Page 137] Internet-Draft CICM July 2010 3.5.4.5.3. CICM::SetVectorController Methods Method CICM::SetVectorController::set_vector() CICM::Status set_vector( in CICM::Vector vec ); Set channel state vector. Remarks: This state value may be set when a controller is initially created (initialization vector). It may also be set on a block-by-block basis for appropriate algorithms/modes or for each time epoch (e.g., for time-of-day encryption). Parameters: [in] vec State vector. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_INVALID_VECTOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SetVectorController::set_vector_no_check() CICM::Status set_vector_no_check( in CICM::Vector vec ); Set channel state vector without a policy check. Remarks: This state value may be set when a controller is initially created (initialization vector) or on a per-message basis, depending upon how the cryptographic algorithm uses the vector. The length and format of the vector are specific to the algorithm associated with the channel and system in which the channel is being used. This version of the set_vector() method may be used on the decrypt side, for example, to specify no TOD check in cases where TOD rules are not enforced for decryption. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 138] Internet-Draft CICM July 2010 [in] vec State vector. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_INVALID_VECTOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT Method CICM::SetVectorController::reset_vector() CICM::Status reset_vector(); Reset channel state vector to system-dependent value. Remarks: This can be used by the client program to manage time-of-day or counter rollover. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.5.4.6. Interface CICM::GenVectorController Interface CICM::GenVectorController interface GenVectorController : CICM::SetVectorController { Enables an state vector to be generated. {FIGURE REMOVED} Figure 28. Interface Inheritance Diagram for GenVectorController 3.5.4.6.1. CICM::GenVectorController Inheritance CICM::GenVectorController inherits from: CICM::SetVectorController. Lanz & Novikov Expires January 8, 2011 [Page 139] Internet-Draft CICM July 2010 3.5.4.6.2. CICM::GenVectorController Methods Method CICM::GenVectorController::generate_vector() CICM::Status generate_vector(); Generate a vector for this controller utilizing new random state. Remarks: It may not be necessary for a client program to explicitly generate a vector. Some cryptographic modules will implicitly generate an IV, for example, as a byproduct of channel creation. In other cases, an existing vector will be associated with a controller by calling the CICM::SetVectorController::set_vector method. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_INSUFFICIENT_ENTROPY Method CICM::GenVectorController::generate_vector_existing_state() CICM::Status generate_vector_existing_state(); Generate a vector for this controller utilizing the latest unused state. Remarks: It may not be necessary for a client program to explicitly generate a vector. Some cryptographic modules will implicitly generate an IV, for example, as a byproduct of channel creation. In other cases, an existing vector will be associated with a controller by calling the CICM::SetVectorController::set_vector method. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_INSUFFICIENT_ENTROPY Lanz & Novikov Expires January 8, 2011 [Page 140] Internet-Draft CICM July 2010 3.5.4.7. Interface CICM::ResyncController Interface CICM::ResyncController interface ResyncController : CICM::Controller { Provides methods to resynchronize a controller or conduit. 3.5.4.7.1. CICM::ResyncController Inheritance CICM::ResyncController inherits from: CICM::Controller. 3.5.4.7.2. CICM::ResyncController Methods Method CICM::ResyncController::resync() CICM::Status resync(); Resynchronize the channel. Remarks: A client program-initiated resync is required when the host is responsible for ensuring cryptographic synchronization is maintained because the operating mode used does not enable the module to determine that it is out of sync. The action taken by the module as the result of a call to this method will differ based upon characteristics of the cryptographic algorithm, communications path framing, and details of the protocol used to achieve cryptographic synchronization between two modules. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET See also: CICM::ResyncController::resync_with_sync_vector for the version of this method that accepts a synchronization vector. Method CICM::ResyncController::resync_with_sync_vector() CICM::Status resync_with_sync_vector( in CICM::Vector vec ); Resynchronize the channel, using the specified synchronization vector (required by certain operating modes to initiate a resync). Remarks: Lanz & Novikov Expires January 8, 2011 [Page 141] Internet-Draft CICM July 2010 A client program-initiated resync is required when the host is responsible for ensuring cryptographic synchronization is maintained because the operating mode used does not enable the module to determine that it is out of sync. The action taken by the module as the result of a call to this method will differ based upon characteristics of the cryptographic algorithm, communications path framing, and details of the protocol used to achieve cryptographic synchronization among modules. Parameters: [in] vec Synchronization vector to use to resynchronize the channel. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_INVALID_VECTOR, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET See also: CICM::ResyncController::resync for the version of this method that does not require a synchronization vector. 3.5.5. Channel Negotiation 3.5.5.1. Negotiating Channels and Controllers When creating an encryption or decryption channel using an asymmetric keyset, a negotiation process must be initiated between the two communicating entities, resulting in an ephemeral symmetric key held by each entity. The following details the steps in the negotiation process: 1. Retrieve a negotiator. The client program uses the CICM:: ChannelManager to create the appropriate CICM::Negotiator, thus initiating the negotiation. 2. Validate remote peer. Most systems will use a trust anchor to validate that the remote peer is legitimate and will further verify the peer appears on the appropriate access control list(s). In some cases, the above validation will be sufficient. In others, it will be necessary to display information about the remote peer to a human user to receive a positive response from Lanz & Novikov Expires January 8, 2011 [Page 142] Internet-Draft CICM July 2010 the user that the displayed peer is the expected peer. This validation procedure differs depending upon the display configuration: * If the system is configured with a trusted display, information about the remote peer is displayed to the trusted display and the user is solicited for a response which is returned to the module. The trusted display interactions take place independent of the API. * If the system is not configured with a trusted display, the client program uses CICM::Negotiator::get_remote_info to retrieve information about the remote peer and then displays this information to the user (independent of CICM) to allow the user to determine if this is the expected remote peer; the client program calls CICM::Negotiator::abort_negotiation to abort the negotiation if the user rejects the remote peer. 3. Complete negotiation. The client program explicitly completes the negotiation using the negotiator's complete() method. A successful negotation results in a negotiated controller. 3.5.5.2. Interface CICM::Negotiator Interface CICM::Negotiator interface Negotiator { CICM::Negotiator is an abstraction inherited by controllers and CICM::KeyProtocolSender to assist in the management of the negotiation process. 3.5.5.2.1. CICM::Negotiator Methods Method CICM::Negotiator::get_remote_info() CICM::Status get_remote_info( out CICM::PeerInfo peer_info ); Retrieve remote peer identification information. The peer information must be displayed to the local user to enable determination to be made as to whether negotiation should continue or be aborted. If the decision is made to abort negotiation, the CICM:: Negotiator::abort_negotiation method must be called to destroy any protocol session state. Parameters: [out] peer_info Identifying information about the remote peer. Lanz & Novikov Expires January 8, 2011 [Page 143] Internet-Draft CICM July 2010 Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_NOT_AVAILABLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_TRUSTED_DISPLAY, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Method CICM::Negotiator::abort_negotiation() CICM::Status abort_negotiation(); Abort negotiation or renegotiation. This method must be called in the event the identification information for the remote host does not correspond to the expected host. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_NOT_IN_PROGRESS, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.5.3. Interface CICM::PeerInfo Interface CICM::PeerInfo interface PeerInfo { Information about a peer entity participating in a key negotiation. 3.5.5.3.1. CICM::PeerInfo Attributes Attribute CICM::PeerInfo::peer_name readonly attribute CICM::CharString peer_name; Name/organization of remote entity participating in key agreement prototcol. AttributeCICM::PeerInfo::classification readonly attribute CICM::Classification classification; Highest security classification level at which the remote entity participating in the key agreement protocol is capable of communicating. Lanz & Novikov Expires January 8, 2011 [Page 144] Internet-Draft CICM July 2010 Attribute CICM::PeerInfo::compartment readonly attribute CICM::CharString compartment; Compartment of remote entity participating in key agreement protocol. Attribute CICM::PeerInfo::message readonly attribute CICM::CharString message; Message to be displayed regarding the remote entities' participation in key agreement protocol. 3.5.6. Encryption Channel Management Namespace CICM::Encrypt module Encrypt { The CICM::Encrypt namespace contains interfaces that support encryption operations between two independent security domains. {FIGURE REMOVED} Figure 29. Interface Relationship Diagram for Encryption Channels {FIGURE REMOVED} Figure 30. Interface Relationship Diagram for Negotiated Encryption Channels 3.5.6.1. Interface CICM::Encrypt::ChannelManager Interface CICM::Encrypt::ChannelManager interface ChannelManager { CICM::Encrypt::ChannelManager is an abstraction inherited by CICM:: ChannelManager that supports the creation of encryption negotiators, conduits, controllers, and streams. See CICM::ChannelManager for additional information. 3.5.6.1.1. CICM::Encrypt::ChannelManager Methods Method CICM::Encrypt::ChannelManager::negotiate_encrypt_conduit() CICM::Status negotiate_encrypt_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Encrypt::Negotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer. The channel that results will encrypt a stream of data. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 145] Internet-Draft CICM July 2010 [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Encrypt::ChannelManager:: negotiate_encrypt_with_mac_conduit() CICM::Status negotiate_encrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::SymKey mac_key_ref, in CICM::AsymKey nego_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, out CICM::Encrypt::WithMACNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer. The channel that results will MAC and encrypt a stream of data. Remarks: Negotiation applies only to the negotiation key, not the MAC key. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. Lanz & Novikov Expires January 8, 2011 [Page 146] Internet-Draft CICM July 2010 [in] mac_key_ref Reference to MAC key. [in] nego_key_ref Reference to negotiation key. [in] mac_algorithm MAC algorithm. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Encrypt::ChannelManager:: negotiate_encrypt_with_sign_conduit() CICM::Status negotiate_encrypt_with_sign_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey sign_key_ref, in CICM::AsymKey nego_key_ref, in CICM::AsymSigAlgorithmId sign_algorithm, out CICM::Encrypt::WithSignNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer. The channel that results will sign and encrypt a stream of data. Remarks: Negotiation applies only to the negotiation key, not the signature key. Parameters: [in] remote_port Remote port. Lanz & Novikov Expires January 8, 2011 [Page 147] Internet-Draft CICM July 2010 [in] protocol Protocol identifier. [in] sign_key_ref Reference to signature key. [in] nego_key_ref Reference to negotiation key. [in] sign_algorithm Signature algorithm. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Encrypt::ChannelManager::negotiate_encrypt_controller() CICM::Status negotiate_encrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Encrypt::ControllerNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer, resulting in a controller to manage an encryption channel. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to encryption key. Lanz & Novikov Expires January 8, 2011 [Page 148] Internet-Draft CICM July 2010 [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Encrypt::ChannelManager::create_encrypt_conduit() CICM::Status create_encrypt_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Encrypt::Conduit conduit_ref ); Create conduit to encrypt a stream of data. Parameters: [in] remote_port Remote port. [in] key_ref Reference to encryption key. [in] algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, Lanz & Novikov Expires January 8, 2011 [Page 149] Internet-Draft CICM July 2010 S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Encrypt::ChannelManager:: create_encrypt_with_mac_conduit() CICM::Status create_encrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::SymKey mac_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, in CICM::SymEncrAlgorithmId encr_algorithm, out CICM::Encrypt::WithMACConduit conduit_ref ); Create conduit to MAC and encrypt a stream of data. Parameters: [in] remote_port Remote port. [in] mac_key_ref Reference to MAC key. [in] encrypt_key_ref Reference to encryption key. [in] mac_algorithm MAC algorithm. [in] encr_algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 150] Internet-Draft CICM July 2010 Method CICM::Encrypt::ChannelManager:: create_encrypt_with_sign_conduit() CICM::Status create_encrypt_with_sign_conduit( in CICM::RemotePort remote_port, in CICM::AsymKey sign_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::AsymSigAlgorithmId sign_algorithm, in CICM::SymEncrAlgorithmId encr_algorithm, out CICM::Encrypt::WithSignConduit conduit_ref ); Create conduit to sign and encrypt a stream of data. Parameters: [in] remote_port Remote port. [in] sign_key_ref Reference to signature key. [in] encrypt_key_ref Reference to encryption key. [in] sign_algorithm Signature algorithm. [in] encr_algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 151] Internet-Draft CICM July 2010 Method CICM::Encrypt::ChannelManager::create_key_wrap_conduit() CICM::Status create_key_wrap_conduit( in CICM::RemotePort remote_port, in CICM::SymKey kek_ref, in CICM::KeyWrapAlgorithmId algorithm, out CICM::Encrypt::KeyWrapConduit conduit_ref ); Create conduit to wrap a key. Remarks: This type of conduit may be used to wrap key material bound for a peer cryptographic module. To wrap individual keys already in the module, use CICM::Symkey::wrap or CICM::Asymkey::wrap. Parameters: [in] remote_port Remote port. [in] kek_ref Reference to key encryption key. [in] algorithm Key wrapping algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 152] Internet-Draft CICM July 2010 Method CICM::Encrypt::ChannelManager::create_encrypt_controller() CICM::Status create_encrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Encrypt::Controller controller_ref ); Create controller to configure and control an encryption channel. Remarks: In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] key_ref Reference to encryption key. [in] algorithm Encryption algorithm/mode. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Encrypt::ChannelManager::get_encrypt_stream() CICM::Status get_encrypt_stream( in CICM::LocalPort local_port, out CICM::Encrypt::Stream stream_ref ); Create stream associated with previously created controller to accept data for transformation. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 153] Internet-Draft CICM July 2010 [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND 3.5.6.2. Interface CICM::Encrypt::Stream Interface CICM::Encrypt::Stream interface Stream : CICM::WriteStream { CICM::Encrypt::Stream supports encryption operations between two independent security domains. The resulting stream is capable of accepting data for transformation, but not managing the channel. It is created by calling CICM::ChannelManager::get_encrypt_stream. 3.5.6.2.1. CICM::Encrypt::Stream Inheritance CICM::Encrypt::Stream inherits from: CICM::WriteStream. 3.5.6.2.2. CICM::Encrypt::Stream Methods Method CICM::Encrypt::Stream::encrypt() CICM::Status encrypt( in CICM::Buffer buffer ); Sends data to the module to be encrypted. The method blocks until data is sent. Parameters: [in] buffer Plaintext to encrypt. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, Lanz & Novikov Expires January 8, 2011 [Page 154] Internet-Draft CICM July 2010 S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN Method CICM::Encrypt::Stream::encrypt_non_blocking() CICM::Status encrypt_non_blocking( in CICM::Buffer buffer, in CICM::TransId transaction_id ); Registers a buffer of data to be sent to the module for encryption and then immediately returns control to the caller. The length of the data is encapsulated in the buffer parameter. The caller may use the CICM::Encrypt::Stream::encrypt_poll method to proactively poll the channel to determine the status of the operation. The caller is responsible for maintaining any necessary metadata associated with the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] buffer Plaintext to encrypt. [in] transaction_id Unique transaction id that will be used by the CICM::Encrypt::Stream::encrypt_poll method to determine to which buffer the poll status applies. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN Method CICM::Encrypt::Stream::encrypt_poll() CICM::Status encrypt_poll( in CICM::TransId transaction_id, out CICM::WriteStream::WriteStatus status ); Returns the status of the non-blocking encryption operation specified by the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Lanz & Novikov Expires January 8, 2011 [Page 155] Internet-Draft CICM July 2010 Parameters: [in] transaction_id Unique transaction id previously specified to the CICM::Encrypt::Stream::encrypt_non_blocking method that allows the poll operation to determine to which buffer the poll status applies. [out] status Status of the non-blocking operation corresponding to the transaction_id parameter. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR 3.5.6.3. Interface CICM::Encrypt::KeyWrapStream Interface CICM::Encrypt::KeyWrapStream interface KeyWrapStream : CICM::Stream { CICM::Encrypt::KeyWrapStream is an abstraction that allows key material to be presented to a stream for wrapping prior to passing into a different security domain. 3.5.6.3.1. CICM::Encrypt::KeyWrapStream Inheritance CICM::Encrypt::KeyWrapStream inherits from: CICM::Stream. 3.5.6.3.2. CICM::Encrypt::KeyWrapStream Methods Method CICM::Encrypt::KeyWrapStream::wrap_key() CICM::Status wrap_key( in CICM::Key key_ref ); Write the key to be wrapped to the channel stream. Remarks: The method blocks until the key has been written. Parameters: [in] key_ref Reference to key to be wrapped. Lanz & Novikov Expires January 8, 2011 [Page 156] Internet-Draft CICM July 2010 Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_CLASSIFICATION, S_KEY_WRAPPED, S_KEY_NOT_WRAPPABLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR 3.5.6.4. Interface CICM::Encrypt::Controller Interface CICM::Encrypt::Controller interface Controller : CICM::MultiDomainController, CICM::SymKeyController, CICM::GenVectorController, CICM::ResyncController { CICM::Encrypt::Controller supports encryption operations between two independent security domains. The resulting controller is capable of managing the channel, but not accepting data for transformation. It is created by calling CICM::ChannelManager:: create_encrypt_controller. 3.5.6.4.1. CICM::Encrypt::Controller Inheritance CICM::Encrypt::Controller inherits from: CICM::MultiDomainController, CICM::SymKeyController, CICM::GenVectorController and CICM:: ResyncController. 3.5.6.5. Interface CICM::Encrypt::NegotiatedController Interface CICM::Encrypt::NegotiatedController interface NegotiatedController : CICM::NegotiatedController, CICM::GenVectorController, CICM::ResyncController { CICM::Encrypt::NegotiatedController is the negotiated version of CICM::Encrypt::Controller. It is the result of a successful negotiation by CICM::Encrypt::ControllerNegotiator. 3.5.6.5.1. CICM::Encrypt::NegotiatedController Inheritance CICM::Encrypt::NegotiatedController inherits from: CICM:: NegotiatedController, CICM::GenVectorController and CICM:: ResyncController. Lanz & Novikov Expires January 8, 2011 [Page 157] Internet-Draft CICM July 2010 3.5.6.6. Interface CICM::Encrypt::Conduit Interface CICM::Encrypt::Conduit interface Conduit : CICM::Conduit, CICM::Encrypt::Controller, CICM::Encrypt::Stream { CICM::Encrypt::Conduit supports encryption operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting data for transformation. It is created by calling CICM::ChannelManager::create_encrypt_conduit. 3.5.6.6.1. CICM::Encrypt::Conduit Inheritance CICM::Encrypt::Conduit inherits from: CICM::Conduit, CICM::Encrypt:: Controller and CICM::Encrypt::Stream. 3.5.6.7. Interface CICM::Encrypt::NegotiatedConduit Interface CICM::Encrypt::NegotiatedConduit interface NegotiatedConduit : CICM::Conduit, CICM::Encrypt::NegotiatedController, CICM::Encrypt::Stream { CICM::Encrypt::NegotiatedConduit is the negotiated version of CICM:: Encrypt::Conduit. It is the result of a successful negotiation by CICM::Encrypt::Negotiator. 3.5.6.7.1. CICM::Encrypt::NegotiatedConduit Inheritance CICM::Encrypt::NegotiatedConduit inherits from: CICM::Conduit, CICM:: Encrypt::NegotiatedController and CICM::Encrypt::Stream. 3.5.6.8. Interface CICM::Encrypt::WithMACConduit Interface CICM::Encrypt::WithMACConduit interface WithMACConduit : CICM::AbstractMACConduit, CICM::Encrypt::Conduit { CICM::Encrypt::WithMACConduit supports encryption operations between two independent security domains with the receipt of a MAC value in the initiating domain. The resulting conduit is capable of both managing the channel and accepting data for transformation. It is created by calling CICM::ChannelManager:: create_encrypt_with_mac_conduit. Lanz & Novikov Expires January 8, 2011 [Page 158] Internet-Draft CICM July 2010 3.5.6.8.1. CICM::Encrypt::WithMACConduit Inheritance CICM::Encrypt::WithMACConduit inherits from: CICM::AbstractMACConduit and CICM::Encrypt::Conduit. 3.5.6.9. Interface CICM::Encrypt::WithMACNegotiatedConduit Interface CICM::Encrypt::WithMACNegotiatedConduit interface WithMACNegotiatedConduit : CICM::AbstractMACConduit, CICM::Encrypt::NegotiatedConduit { CICM::Encrypt::WithMACNegotiatedConduit is the negotiated version of CICM::Encrypt::WithMACConduit. It is the result of a successful negotiation by CICM::Encrypt::WithMACNegotiator. 3.5.6.9.1. CICM::Encrypt::WithMACNegotiatedConduit Inheritance CICM::Encrypt::WithMACNegotiatedConduit inherits from: CICM:: AbstractMACConduit and CICM::Encrypt::NegotiatedConduit. 3.5.6.10. Interface CICM::Encrypt::WithSignConduit Interface CICM::Encrypt::WithSignConduit interface WithSignConduit : CICM::AbstractSignConduit, CICM::Encrypt::Conduit { CICM::Encrypt::WithSignConduit supports encryption operations between two independent security domains with the receipt of a signature value in the initiating domain. The resulting conduit is capable of both managing the channel and accepting data for transformation. It is created by calling CICM::ChannelManager:: create_encrypt_with_sign_conduit. 3.5.6.10.1. CICM::Encrypt::WithSignConduit Inheritance CICM::Encrypt::WithSignConduit inherits from: CICM:: AbstractSignConduit and CICM::Encrypt::Conduit. 3.5.6.11. Interface CICM::Encrypt::WithSignNegotiatedConduit Interface CICM::Encrypt::WithSignNegotiatedConduit interface WithSignNegotiatedConduit : CICM::AbstractSignConduit, CICM::Encrypt::NegotiatedConduit { CICM::Encrypt::WithSignNegotiatedConduit is the negotiated version of CICM::Encrypt::WithSignConduit. It is the result of a successful negotiation by CICM::Encrypt::WithSignNegotiator. Lanz & Novikov Expires January 8, 2011 [Page 159] Internet-Draft CICM July 2010 3.5.6.11.1. CICM::Encrypt::WithSignNegotiatedConduit Inheritance CICM::Encrypt::WithSignNegotiatedConduit inherits from: CICM:: AbstractSignConduit and CICM::Encrypt::NegotiatedConduit. 3.5.6.12. Interface CICM::Encrypt::KeyWrapConduit Interface CICM::Encrypt::KeyWrapConduit interface KeyWrapConduit : CICM::Encrypt::Controller, CICM::Encrypt::KeyWrapStream { CICM::Encrypt::KeyWrapConduit supports key wrapping operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting keys for transformation. It is created by calling CICM::ChannelManager:: create_key_wrap_conduit. 3.5.6.12.1. CICM::Encrypt::KeyWrapConduit Inheritance CICM::Encrypt::KeyWrapConduit inherits from: CICM::Encrypt:: Controller and CICM::Encrypt::KeyWrapStream. 3.5.6.13. Interface CICM::Encrypt::ControllerNegotiator Interface CICM::Encrypt::ControllerNegotiator interface ControllerNegotiator : CICM::Negotiator { CICM::Encrypt::ControllerNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption operations between two independent security domains. The result of a successful negotiation is a CICM::Encrypt:: NegotiatedController which is capable of managing the channel, but not accepting data for transformation. CICM::Encrypt:: ControllerNegotiator is created by calling CICM::ChannelManager:: negotiate_encrypt_controller. 3.5.6.13.1. CICM::Encrypt::ControllerNegotiator Inheritance CICM::Encrypt::ControllerNegotiator inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 160] Internet-Draft CICM July 2010 3.5.6.13.2. CICM::Encrypt::ControllerNegotiator Methods Method CICM::Encrypt::ControllerNegotiator::complete() CICM::Status complete( out CICM::Encrypt::NegotiatedController controller_ref ); Complete negotiation and retrieve a negotiated negotiated encrypt controller. Parameters: [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.6.14. Interface CICM::Encrypt::Negotiator Interface CICM::Encrypt::Negotiator interface Negotiator : CICM::Negotiator { CICM::Encrypt::Negotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption operations between two independent security domains. The result of a successful negotiation is a CICM::Encrypt::NegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Negotiator is created by calling CICM:: Encrypt::ChannelManager::negotiate_encrypt_conduit. 3.5.6.14.1. CICM::Encrypt::Negotiator Inheritance CICM::Encrypt::Negotiator inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 161] Internet-Draft CICM July 2010 3.5.6.14.2. CICM::Encrypt::Negotiator Methods Method CICM::Encrypt::Negotiator::complete() CICM::Status complete( out CICM::Encrypt::NegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated encrypt conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.6.15. Interface CICM::Encrypt::WithMACNegotiator Interface CICM::Encrypt::WithMACNegotiator interface WithMACNegotiator : CICM::Negotiator { CICM::Encrypt::WithMACNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption operations between two independent security domains. Additionally, a message authentication code is received in the initiating domain. The result of a successful negotiation is a CICM::Encrypt:: WithMACNegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Encrypt:: WithMACNegotiator is created by calling CICM::ChannelManager:: negotiate_encrypt_with_mac_conduit. 3.5.6.15.1. CICM::Encrypt::WithMACNegotiator Inheritance CICM::Encrypt::WithMACNegotiator inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 162] Internet-Draft CICM July 2010 3.5.6.15.2. CICM::Encrypt::WithMACNegotiator Methods Method CICM::Encrypt::WithMACNegotiator::complete() CICM::Status complete( out CICM::Encrypt::WithMACNegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated MAC encrypt conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.6.16. Interface CICM::Encrypt::WithSignNegotiator Interface CICM::Encrypt::WithSignNegotiator interface WithSignNegotiator : CICM::Negotiator { CICM::Encrypt::WithSignNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption operations between two independent security domains. Additionally, a signature value is received in the initiating domain. The result of a successful negotiation is a CICM::Encrypt:: WithSignNegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Encrypt:: WithSignNegotiator is created by calling CICM::ChannelManager:: negotiate_encrypt_with_sign_conduit. 3.5.6.16.1. CICM::Encrypt::WithSignNegotiator Inheritance CICM::Encrypt::WithSignNegotiator inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 163] Internet-Draft CICM July 2010 3.5.6.16.2. CICM::Encrypt::WithSignNegotiator Methods Method CICM::Encrypt::WithSignNegotiator::complete() CICM::Status complete( out CICM::Encrypt::WithSignNegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated sign encrypt conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.7. Decryption Channel Management Namespace CICM::Decrypt module Decrypt { The CICM::Decrypt namespace contains interfaces that support decryption operations between two independent security domains. {FIGURE REMOVED} Figure 31. Interface Relationship Diagram for Decryption Channels {FIGURE REMOVED} Figure 32. Interface Relationship Diagram for Negotiated Decryption Channels 3.5.7.1. Interface CICM::Decrypt::ChannelManager Interface CICM::Decrypt::ChannelManager interface ChannelManager { CICM::Decrypt::ChannelManager is an abstraction inherited by CICM:: ChannelManager that supports the creation of decryption negotiators, conduits, controllers, and streams. See CICM::ChannelManager for additional information. Lanz & Novikov Expires January 8, 2011 [Page 164] Internet-Draft CICM July 2010 3.5.7.1.1. CICM::Decrypt::ChannelManager Methods Method CICM::Decrypt::ChannelManager::negotiate_decrypt_conduit() CICM::Status negotiate_decrypt_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Decrypt::Negotiator negotiator_ref ); Creates a negotiator that, upon successful negotiation, results in a CICM::Decrypt::NegotiatedConduit. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 165] Internet-Draft CICM July 2010 Method CICM::Decrypt::ChannelManager:: negotiate_decrypt_with_mac_conduit() CICM::Status negotiate_decrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::SymKey verify_key_ref, in CICM::AsymKey nego_key_ref, in CICM::SymMacAlgorithmId verify_algorithm, out CICM::Decrypt::WithMACNegotiator negotiator_ref ); Creates a negotiator that, upon successful negotiation, results in a CICM::Decrypt::MACNegotiatedConduit. Remarks: Negotiation applies only to the negotiation key, not the MAC key. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. [in] verify_key_ref Reference to verification key. [in] nego_key_ref Reference to negotiation key. [in] verify_algorithm Verification algorithm. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 166] Internet-Draft CICM July 2010 Method CICM::Decrypt::ChannelManager:: negotiate_decrypt_with_verify_conduit() CICM::Status negotiate_decrypt_with_verify_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey verify_key_ref, in CICM::AsymKey nego_key_ref, in CICM::AsymSigAlgorithmId verify_algorithm, out CICM::Decrypt::WithVerifyNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer. The channel that results will decrypt and verify a stream of data. Remarks: Negotiation applies only to the negotiation key, not the signature verification key. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. [in] verify_key_ref Reference to verification key. [in] nego_key_ref Reference to negotiation key. [in] verify_algorithm Verification algorithm. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 167] Internet-Draft CICM July 2010 Method CICM::Decrypt::ChannelManager::negotiate_decrypt_controller() CICM::Status negotiate_decrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Decrypt::ControllerNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer, resulting in a controller to manage a decryption channel. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 168] Internet-Draft CICM July 2010 Method CICM::Decrypt::ChannelManager::create_decrypt_conduit() CICM::Status create_decrypt_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Decrypt::Conduit conduit_ref ); Create channel to decrypt a stream of data. Parameters: [in] remote_port Remote port. [in] key_ref Reference to decryption key. [in] algorithm Decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Decrypt::ChannelManager:: create_decrypt_with_mac_conduit() CICM::Status create_decrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::SymKey verify_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::SymMacAlgorithmId verify_algorithm, in CICM::SymEncrAlgorithmId decrypt_algorithm, out CICM::Decrypt::WithMACConduit conduit_ref ); Create channel to MAC verify and decrypt a stream of data. Parameters: [in] remote_port Remote port. [in] verify_key_ref Reference to verification key. Lanz & Novikov Expires January 8, 2011 [Page 169] Internet-Draft CICM July 2010 [in] decrypt_key_ref Reference to decryption key. [in] verify_algorithm Verification algorithm. [in] decrypt_algorithm Decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Decrypt::ChannelManager:: create_decrypt_with_verify_conduit() CICM::Status create_decrypt_with_verify_conduit( in CICM::RemotePort remote_port, in CICM::AsymKey verify_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::AsymSigAlgorithmId verify_algorithm, in CICM::SymEncrAlgorithmId decrypt_algorithm, out CICM::Decrypt::WithVerifyConduit conduit_ref ); Create channel to verify and decrypt a stream of data. Parameters: [in] remote_port Remote port. [in] verify_key_ref Reference to verification key. [in] decrypt_key_ref Reference to decryption key. [in] verify_algorithm Verification algorithm. [in] decrypt_algorithm Decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: Lanz & Novikov Expires January 8, 2011 [Page 170] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Decrypt::ChannelManager::create_key_unwrap_conduit() CICM::Status create_key_unwrap_conduit( in CICM::RemotePort remote_port, in CICM::SymKey kek_ref, in CICM::KeyWrapAlgorithmId algorithm, out CICM::Decrypt::KeyUnwrapConduit conduit_ref ); Create channel to unwrap a key. This type of channel may be used to bulk unwrap key material originating at a key infrastructure component or from a peer cryptographic module. Note that, to unwrap individual keys already in the module, use CICM::Symkey::unwrap or CICM::Asymkey::unwrap. Parameters: [in] remote_port Remote port. [in] kek_ref Reference to key encryption key. [in] algorithm Key unwrapping algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 171] Internet-Draft CICM July 2010 Method CICM::Decrypt::ChannelManager::create_decrypt_controller() CICM::Status create_decrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Decrypt::Controller controller_ref ); Create controller to configure and control an decryption channel. Remarks: In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] key_ref Reference to decryption key. [in] algorithm Decryption algorithm/mode. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 172] Internet-Draft CICM July 2010 Method CICM::Decrypt::ChannelManager::get_decrypt_stream() CICM::Status get_decrypt_stream( in CICM::LocalPort local_port, out CICM::Decrypt::Stream stream_ref ); Create stream associated with previously created controller to receive transformed data. Parameters: [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND 3.5.7.2. Interface CICM::Decrypt::Stream Interface CICM::Decrypt::Stream interface Stream : CICM::ReadStream { CICM::Decrypt::Stream supports decryption operations between two independent security domains. The resulting stream is capable of accepting transformed data, but not managing the channel. It is created by calling CICM::ChannelManager::get_decrypt_stream. 3.5.7.2.1. CICM::Decrypt::Stream Inheritance CICM::Decrypt::Stream inherits from: CICM::ReadStream. 3.5.7.2.2. CICM::Decrypt::Stream Methods Method CICM::Decrypt::Stream::decrypt() CICM::Status decrypt( out CICM::Buffer buffer ); Read plaintext data off of decrypt channel stream. The method blocks until data becomes available. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 173] Internet-Draft CICM July 2010 [out] buffer Plaintext resulting from decryption operation. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_BUFFER_LEN, S_INTEGRITY Method CICM::Decrypt::Stream::decrypt_non_blocking() CICM::Status decrypt_non_blocking( out CICM::Buffer buffer, in CICM::TransId transaction_id ); Registers a buffer into which plaintext resulting from the decryption operation will be copied, and then immediately returns control to the caller. The size of the allocated buffer and length of the resulting plaintext is encapsulated in the buffer parameter. The caller may use the CICM::Decrypt::Stream::decrypt_poll method to proactively poll the channel to determine the status of the operation. The caller is responsible for maintaining any necessary metadata associated with the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [out] buffer Plaintext resulting from decryption operation. [in] transaction_id Unique transaction id that will be used by the CICM::Decrypt::Stream::decrypt_poll method to determine to which buffer the poll status applies. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_BUFFER_LEN, S_INTEGRITY Lanz & Novikov Expires January 8, 2011 [Page 174] Internet-Draft CICM July 2010 Method CICM::Decrypt::Stream::decrypt_poll() CICM::Status decrypt_poll( in CICM::TransId transaction_id, out CICM::ReadStream::ReadStatus status ); Returns the status of the non-blocking decryption operation specified by the transaction_id parameter. Upon completion of the operation, the caller must use the metadata associated with the transaction_id parameter to determine which buffer has been populated. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] transaction_id Unique transaction id previously specified to the CICM::Decrypt::Stream::decrypt_non_blocking method that allows the poll operation to determine to which buffer the poll status applies. [out] status Status of the non-blocking operation corresponding to the transaction_id parameter. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR 3.5.7.3. Interface CICM::Decrypt::KeyUnwrapStream Interface CICM::Decrypt::KeyUnwrapStream interface KeyUnwrapStream : CICM::Stream { CICM::Decrypt::KeyUnwrapStream is an abstraction that allows unwrapped key material received from another domain to be retrieved. 3.5.7.3.1. CICM::Decrypt::KeyUnwrapStream Inheritance CICM::Decrypt::KeyUnwrapStream inherits from: CICM::Stream. Lanz & Novikov Expires January 8, 2011 [Page 175] Internet-Draft CICM July 2010 3.5.7.3.2. CICM::Decrypt::KeyUnwrapStream Methods Method CICM::Decrypt::KeyUnwrapStream::unwrap_sym_key() CICM::Status unwrap_sym_key( out CICM::SymKey key_ref ); Read one unwrapped symmetric key off of channel stream and return a reference to the key. The method blocks until a key becomes available. Parameters: [in] key_ref Reference to key encryption key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR Method CICM::Decrypt::KeyUnwrapStream::unwrap_asym_key() CICM::Status unwrap_asym_key( out CICM::AsymKey key_ref ); Read one unwrapped asymmetric key off of channel stream and return a reference to the key. The method blocks until a key becomes available. Parameters: [in] key_ref Reference to key encryption key. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR Lanz & Novikov Expires January 8, 2011 [Page 176] Internet-Draft CICM July 2010 3.5.7.4. Interface CICM::Decrypt::Controller Interface CICM::Decrypt::Controller interface Controller : CICM::MultiDomainController, CICM::SymKeyController, CICM::SetVectorController, CICM::ResyncController { CICM::Decrypt::Controller supports decryption operations between two independent security domains. The resulting controller is capable of managing the channel, but not accepting transformed data. It is created by calling CICM::ChannelManager::create_decrypt_controller. 3.5.7.4.1. CICM::Decrypt::Controller Inheritance CICM::Decrypt::Controller inherits from: CICM::MultiDomainController, CICM::SymKeyController, CICM::SetVectorController and CICM:: ResyncController. 3.5.7.5. Interface CICM::Decrypt::NegotiatedController Interface CICM::Decrypt::NegotiatedController interface NegotiatedController : CICM::NegotiatedController, CICM::SetVectorController, CICM::ResyncController { CICM::Decrypt::NegotiatedController is the negotiated version of CICM::Decrypt::Controller. It is the result of a successful negotiation by CICM::Decrypt::ControllerNegotiator. 3.5.7.5.1. CICM::Decrypt::NegotiatedController Inheritance CICM::Decrypt::NegotiatedController inherits from: CICM:: NegotiatedController, CICM::SetVectorController and CICM:: ResyncController. 3.5.7.6. Interface CICM::Decrypt::Conduit Interface CICM::Decrypt::Conduit interface Conduit : CICM::Conduit, CICM::Decrypt::Controller, CICM::Decrypt::Stream { CICM::Decrypt::Conduit supports decryption operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting transformed data. It is created by calling CICM::ChannelManager::create_decrypt_conduit. Lanz & Novikov Expires January 8, 2011 [Page 177] Internet-Draft CICM July 2010 3.5.7.6.1. CICM::Decrypt::Conduit Inheritance CICM::Decrypt::Conduit inherits from: CICM::Conduit, CICM::Decrypt:: Controller and CICM::Decrypt::Stream. 3.5.7.7. Interface CICM::Decrypt::NegotiatedConduit Interface CICM::Decrypt::NegotiatedConduit interface NegotiatedConduit : CICM::Conduit, CICM::Decrypt::NegotiatedController, CICM::Decrypt::Stream { CICM::Decrypt::NegotiatedConduit is the negotiated version of CICM:: Decrypt::Conduit. It is the result of a successful negotiation by CICM::Decrypt::Negotiator. 3.5.7.7.1. CICM::Decrypt::NegotiatedConduit Inheritance CICM::Decrypt::NegotiatedConduit inherits from: CICM::Conduit, CICM:: Decrypt::NegotiatedController and CICM::Decrypt::Stream. 3.5.7.8. Interface CICM::Decrypt::WithMACConduit Interface CICM::Decrypt::WithMACConduit interface WithMACConduit : CICM::AbstractMACVerifyConduit, CICM::Decrypt::Conduit { CICM::Decrypt::WithMACConduit supports decryption operations between two independent security domains with the receipt of an indication as to whether MAC verification succeeded or failed in the initiating domain. The resulting conduit is capable of both managing the channel and accepting data for transformation. It is created by calling CICM::ChannelManager::create_decrypt_with_mac_conduit. 3.5.7.8.1. CICM::Decrypt::WithMACConduit Inheritance CICM::Decrypt::WithMACConduit inherits from: CICM:: AbstractMACVerifyConduit and CICM::Decrypt::Conduit. Lanz & Novikov Expires January 8, 2011 [Page 178] Internet-Draft CICM July 2010 3.5.7.9. Interface CICM::Decrypt::WithMACNegotiatedConduit Interface CICM::Decrypt::WithMACNegotiatedConduit interface WithMACNegotiatedConduit : CICM::AbstractMACVerifyConduit, CICM::Decrypt::NegotiatedConduit { CICM::Decrypt::WithMACNegotiatedConduit is the negotiated version of CICM::Decrypt::WithMACConduit. It is the result of a successful negotiation by CICM::Decrypt::WithMACNegotiator. 3.5.7.9.1. CICM::Decrypt::WithMACNegotiatedConduit Inheritance CICM::Decrypt::WithMACNegotiatedConduit inherits from: CICM:: AbstractMACVerifyConduit and CICM::Decrypt::NegotiatedConduit. 3.5.7.10. Interface CICM::Decrypt::WithVerifyConduit Interface CICM::Decrypt::WithVerifyConduit interface WithVerifyConduit : CICM::AbstractSigVerifyConduit, CICM::Decrypt::Conduit { CICM::Decrypt::WithVerifyConduit supports decryption operations between two independent security domains with the receipt of an indication as to whether signature verification succeeded or failed in the initiating domain. The resulting conduit is capable of both managing the channel and accepting transformed data. It is created by calling CICM::ChannelManager::create_decrypt_with_verify_conduit. 3.5.7.10.1. CICM::Decrypt::WithVerifyConduit Inheritance CICM::Decrypt::WithVerifyConduit inherits from: CICM:: AbstractSigVerifyConduit and CICM::Decrypt::Conduit. 3.5.7.11. Interface CICM::Decrypt::WithVerifyNegotiatedConduit Interface CICM::Decrypt::WithVerifyNegotiatedConduit interface WithVerifyNegotiatedConduit : CICM::AbstractSigVerifyConduit, CICM::Decrypt::NegotiatedConduit { CICM::Decrypt::WithVerifyNegotiatedConduit is the negotiated version of CICM::Decrypt::WithVerifyConduit. It is the result of a successful negotiation by CICM::Decrypt::WithVerifyNegotiator. 3.5.7.11.1. CICM::Decrypt::WithVerifyNegotiatedConduit Inheritance CICM::Decrypt::WithVerifyNegotiatedConduit inherits from: CICM:: AbstractSigVerifyConduit and CICM::Decrypt::NegotiatedConduit. Lanz & Novikov Expires January 8, 2011 [Page 179] Internet-Draft CICM July 2010 3.5.7.12. Interface CICM::Decrypt::KeyUnwrapConduit Interface CICM::Decrypt::KeyUnwrapConduit interface KeyUnwrapConduit : CICM::Decrypt::Controller, CICM::Decrypt::KeyUnwrapStream { CICM::Decrypt::KeyUnwrapConduit supports key unwrapping operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting transformed keys. It is created by calling CICM::ChannelManager:: create_key_unwrap_conduit. 3.5.7.12.1. CICM::Decrypt::KeyUnwrapConduit Inheritance CICM::Decrypt::KeyUnwrapConduit inherits from: CICM::Decrypt:: Controller and CICM::Decrypt::KeyUnwrapStream. 3.5.7.13. Interface CICM::Decrypt::Negotiator Interface CICM::Decrypt::Negotiator interface Negotiator : CICM::Negotiator { CICM::Decrypt::Negotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption operations between two independent security domains. The result of a successful negotiation is a CICM::Decrypt::NegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Decrypt::Negotiator is created by calling CICM::ChannelManager::negotiate_decrypt_conduit. 3.5.7.13.1. CICM::Decrypt::Negotiator Inheritance CICM::Decrypt::Negotiator inherits from: CICM::Negotiator. 3.5.7.13.2. CICM::Decrypt::Negotiator Methods Method CICM::Decrypt::Negotiator::complete() CICM::Status complete( out CICM::Decrypt::NegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated decrypt conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: Lanz & Novikov Expires January 8, 2011 [Page 180] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.7.14. Interface CICM::Decrypt::ControllerNegotiator Interface CICM::Decrypt::ControllerNegotiator interface ControllerNegotiator : CICM::Negotiator { CICM::Decrypt::ControllerNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support decryption operations between two independent security domains. The result of a successful negotiation is a CICM::Decrypt:: NegotiatedController which is capable of managing the channel, but not accepting data for transformation. CICM::Decrypt:: ControllerNegotiator is created by calling CICM::ChannelManager:: negotiate_decrypt_controller. 3.5.7.14.1. CICM::Decrypt::ControllerNegotiator Inheritance CICM::Decrypt::ControllerNegotiator inherits from: CICM::Negotiator. 3.5.7.14.2. CICM::Decrypt::ControllerNegotiator Methods Method CICM::Decrypt::ControllerNegotiator::complete() CICM::Status complete( out CICM::Decrypt::NegotiatedController controller_ref ); Complete negotiation and retrieve a negotiated control-only decrypt channel. Parameters: [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, Lanz & Novikov Expires January 8, 2011 [Page 181] Internet-Draft CICM July 2010 S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.7.15. Interface CICM::Decrypt::WithMACNegotiator Interface CICM::Decrypt::WithMACNegotiator interface WithMACNegotiator : CICM::Negotiator { CICM::Decrypt::WithMACNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support decryption operations between two independent security domains. Additionally, a message authentication code is received in the initiating domain. The result of a successful negotiation is a CICM::Decrypt:: WithMACNegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Decrypt:: WithMACNegotiator is created by calling CICM::ChannelManager:: negotiate_decrypt_with_mac_conduit. 3.5.7.15.1. CICM::Decrypt::WithMACNegotiator Inheritance CICM::Decrypt::WithMACNegotiator inherits from: CICM::Negotiator. 3.5.7.15.2. CICM::Decrypt::WithMACNegotiator Methods Method CICM::Decrypt::WithMACNegotiator::complete() CICM::Status complete( out CICM::Decrypt::WithMACNegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated MAC verify decrypt conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Lanz & Novikov Expires January 8, 2011 [Page 182] Internet-Draft CICM July 2010 3.5.7.16. Interface CICM::Decrypt::WithVerifyNegotiator Interface CICM::Decrypt::WithVerifyNegotiator interface WithVerifyNegotiator : CICM::Negotiator { CICM::Decrypt::WithVerifyNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support decryption operations between two independent security domains. Additionally, an indication as to whether verification succeeded or failed is received in the initiating domain. The result of a successful negotiation is a CICM::Decrypt:: WithVerifyNegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Decrypt:: WithVerifyNegotiator is created by calling CICM::ChannelManager:: negotiate_decrypt_with_verify_conduit. 3.5.7.16.1. CICM::Decrypt::WithVerifyNegotiator Inheritance CICM::Decrypt::WithVerifyNegotiator inherits from: CICM::Negotiator. 3.5.7.16.2. CICM::Decrypt::WithVerifyNegotiator Methods Method CICM::Decrypt::WithVerifyNegotiator::complete() CICM::Status complete( out CICM::Decrypt::WithVerifyNegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated verify and decrypt conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Lanz & Novikov Expires January 8, 2011 [Page 183] Internet-Draft CICM July 2010 3.5.8. Duplex Channel Management Namespace CICM::Duplex module Duplex { The CICM::Duplex namespace contains interfaces that support encryption/decryption operations between two independent security domains. {FIGURE REMOVED} Figure 33. Interface Relationship Diagram for Duplex Channels 3.5.8.1. Interface CICM::Duplex::ChannelManager Interface CICM::Duplex::ChannelManager interface ChannelManager { CICM::Duplex::ChannelManager is an abstraction inherited by CICM:: ChannelManager that supports the creation of encryption/decryption negotiators, conduits, controllers, and streams. See CICM:: ChannelManager for additional information. 3.5.8.1.1. CICM::Duplex::ChannelManager Methods Method CICM::Duplex::ChannelManager::negotiate_duplex_conduit() CICM::Status negotiate_duplex_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Duplex::Negotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer, resulting in a conduit that results will encrypt/decrypt data. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, Lanz & Novikov Expires January 8, 2011 [Page 184] Internet-Draft CICM July 2010 S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Duplex::ChannelManager::negotiate_duplex_controller() CICM::Status negotiate_duplex_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Duplex::ControllerNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer, resulting in a controller to manage a duplex channel. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, Lanz & Novikov Expires January 8, 2011 [Page 185] Internet-Draft CICM July 2010 S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Duplex::ChannelManager::create_duplex_conduit() CICM::Status create_duplex_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Duplex::Conduit conduit_ref ); Create duplex channel to encrypt/decrypt a stream of data. Parameters: [in] remote_port Remote port. [in] key_ref Reference to decryption key. [in] algorithm Encryption/decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Duplex::ChannelManager::create_duplex_controller() CICM::Status create_duplex_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Duplex::Controller controller_ref ); Create controller to configure and control a duplex channel. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 186] Internet-Draft CICM July 2010 In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] key_ref Reference to negotiation key. [in] algorithm Encryption/decryption algorithm/mode. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Duplex::ChannelManager::get_duplex_stream() CICM::Status get_duplex_stream( in CICM::LocalPort local_port, out CICM::Duplex::Stream stream_ref ); Create stream associated with previously created controller to accept data for transformation. Parameters: [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, Lanz & Novikov Expires January 8, 2011 [Page 187] Internet-Draft CICM July 2010 S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND 3.5.8.2. Interface CICM::Duplex::Stream Interface CICM::Duplex::Stream interface Stream : CICM::Encrypt::Stream, CICM::Decrypt::Stream { CICM::Duplex::Stream supports encryption/decryption operations between two independent security domains. The resulting stream is capable of accepting data for transformation and receiving transformed data, but not managing the channel. It is created by calling CICM::ChannelManager::get_duplex_stream. 3.5.8.2.1. CICM::Duplex::Stream Inheritance CICM::Duplex::Stream inherits from: CICM::Encrypt::Stream and CICM:: Decrypt::Stream. 3.5.8.3. Interface CICM::Duplex::Controller Interface CICM::Duplex::Controller interface Controller : CICM::Encrypt::Controller, CICM::Decrypt::Controller { CICM::Duplex::Controller supports encryption/decryption operations between two independent security domains. The resulting controller is capable of managing the channel, but not accepting data for transformation and receiving transformed data. It is created by calling CICM::ChannelManager::create_duplex_controller. 3.5.8.3.1. CICM::Duplex::Controller Inheritance CICM::Duplex::Controller inherits from: CICM::Encrypt::Controller and CICM::Decrypt::Controller. Lanz & Novikov Expires January 8, 2011 [Page 188] Internet-Draft CICM July 2010 3.5.8.4. Interface CICM::Duplex::NegotiatedController Interface CICM::Duplex::NegotiatedController interface NegotiatedController : CICM::Encrypt::NegotiatedController, CICM::Decrypt::NegotiatedController { CICM::Duplex::NegotiatedController is the negotiated version of CICM::Duplex::Controller. It is the result of a successful negotiation by CICM::Duplex::ControllerNegotiator. 3.5.8.4.1. CICM::Duplex::NegotiatedController Inheritance CICM::Duplex::NegotiatedController inherits from: CICM::Encrypt:: NegotiatedController and CICM::Decrypt::NegotiatedController. 3.5.8.5. Interface CICM::Duplex::Conduit Interface CICM::Duplex::Conduit interface Conduit : CICM::Conduit, CICM::Duplex::Controller, CICM::Duplex::Stream { CICM::Duplex::Conduit supports encryption/decryption operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting data for transformation and receiving transformed data. It is created by calling CICM::ChannelManager::create_duplex_conduit. 3.5.8.5.1. CICM::Duplex::Conduit Inheritance CICM::Duplex::Conduit inherits from: CICM::Conduit, CICM::Duplex:: Controller and CICM::Duplex::Stream. 3.5.8.6. Interface CICM::Duplex::NegotiatedConduit Interface CICM::Duplex::NegotiatedConduit interface NegotiatedConduit : CICM::Duplex::NegotiatedController, CICM::Duplex::Stream { CICM::Duplex::NegotiatedConduit is the negotiated version of CICM:: Duplex::Conduit. It is the result of a successful negotiation by CICM::Duplex::Negotiator. 3.5.8.6.1. CICM::Duplex::NegotiatedConduit Inheritance CICM::Duplex::NegotiatedConduit inherits from: CICM::Duplex:: NegotiatedController and CICM::Duplex::Stream. Lanz & Novikov Expires January 8, 2011 [Page 189] Internet-Draft CICM July 2010 3.5.8.7. Interface CICM::Duplex::ControllerNegotiator Interface CICM::Duplex::ControllerNegotiator interface ControllerNegotiator : CICM::Negotiator { CICM::Duplex::ControllerNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption/decryption operations between two independent security domains. The result of a successful negotiation is a CICM::Duplex:: NegotiatedController which is capable of managing the channel, but not accepting data for transformation. CICM::Duplex:: ControllerNegotiator is created by calling CICM::ChannelManager:: negotiate_duplex_controller. 3.5.8.7.1. CICM::Duplex::ControllerNegotiator Inheritance CICM::Duplex::ControllerNegotiator inherits from: CICM::Negotiator. 3.5.8.7.2. CICM::Duplex::ControllerNegotiator Methods Method CICM::Duplex::ControllerNegotiator::complete() CICM::Status complete( out CICM::Duplex::NegotiatedController controller_ref ); Complete negotiation and retrieve a negotiated control-only duplex conduit. Parameters: [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Lanz & Novikov Expires January 8, 2011 [Page 190] Internet-Draft CICM July 2010 3.5.8.8. Interface CICM::Duplex::Negotiator Interface CICM::Duplex::Negotiator interface Negotiator : CICM::Negotiator { CICM::Duplex::Negotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption/ decryption operations between two independent security domains. The result of a successful negotiation is a CICM::Duplex:: NegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::Duplex::Negotiator is created by calling CICM::ChannelManager::negotiate_duplex_conduit. 3.5.8.8.1. CICM::Duplex::Negotiator Inheritance CICM::Duplex::Negotiator inherits from: CICM::Negotiator. 3.5.8.8.2. CICM::Duplex::Negotiator Methods Method CICM::Duplex::Negotiator::complete() CICM::Status complete( out CICM::Duplex::NegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated duplex channel. Parameters: [out] conduit_ref Reference to resulting channel. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET Lanz & Novikov Expires January 8, 2011 [Page 191] Internet-Draft CICM July 2010 3.5.9. Bypass (Send) Channel Managment Namespace CICM::BypassWrite module BypassWrite { The CICM::BypassWrite namespace contains channels that support full bypass write operations between two independent security domains. {FIGURE REMOVED} Figure 34. Interface Relationship Diagram for Sending Bypass Data 3.5.9.1. Interface CICM::BypassWrite::ChannelManager Interface CICM::BypassWrite::ChannelManager interface ChannelManager { CICM::BypassWrite::ChannelManager is an abstraction inherited by CICM::ChannelManager that supports the creation of full bypass conduits, controllers, and streams for writing. See CICM:: ChannelManager for additional information. 3.5.9.1.1. CICM::BypassWrite::ChannelManager Methods Method CICM::BypassWrite::ChannelManager:: create_bypass_write_conduit() CICM::Status create_bypass_write_conduit( in CICM::RemotePort remote_port, out CICM::BypassWrite::Conduit conduit_ref ); Creates a conduit to write bypass data. Parameters: [in] remote_port Remote port. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 192] Internet-Draft CICM July 2010 Method CICM::BypassWrite::ChannelManager:: create_bypass_write_controller() CICM::Status create_bypass_write_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, out CICM::BypassWrite::Controller controller_ref ); Returns the controller of a channel that writes bypass data. Remarks: In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. See also: CICM::BypassWrite::ChannelManager::get_bypass_write_stream for the method that returns the channel stream. Parameters: [in] local_port Local port. [in] remote_port Remote port. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::BypassWrite::ChannelManager::get_bypass_write_stream() CICM::Status get_bypass_write_stream( in CICM::LocalPort local_port, out CICM::BypassWrite::Stream stream_ref ); Returns the stream corresponding to a pre-existing controller on the given local port. See also: Lanz & Novikov Expires January 8, 2011 [Page 193] Internet-Draft CICM July 2010 CICM::BypassWrite::ChannelManager::create_bypass_write_controller for the method that returns the channel controller. Parameters: [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND 3.5.9.2. Interface CICM::BypassWrite::Stream Interface CICM::BypassWrite::Stream interface Stream : CICM::WriteStream { CICM::BypassWrite::Stream supports full bypass between two independent security domains. The resulting stream is capable of accepting data for bypass, but not managing the channel. It is created by calling CICM::ChannelManager::get_bypass_write_stream. 3.5.9.2.1. CICM::BypassWrite::Stream Inheritance CICM::BypassWrite::Stream inherits from: CICM::WriteStream. 3.5.9.2.2. CICM::BypassWrite::Stream Methods Method CICM::BypassWrite::Stream::write_bypass() CICM::Status write_bypass( in CICM::Buffer buffer ); Write bypass data to a channel stream. The method blocks until the data has been sent. Parameters: [in] buffer Data to bypass. Returns: Lanz & Novikov Expires January 8, 2011 [Page 194] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN, S_BYPASS_DATARATE_EXCEEDED, S_BYPASS_DATALIMIT_EXCEEDED Method CICM::BypassWrite::Stream::write_bypass_non_blocking() CICM::Status write_bypass_non_blocking( in CICM::Buffer buffer, in CICM::TransId transaction_id ); Registers a buffer of data to be sent to the module for bypass and then immediately returns control to the caller. The length of the data is encapsulated in the buffer parameter. The caller may use the CICM::BypassWrite::Stream::write_bypass_poll method to proactively poll the channel to determine the status of the operation. The caller is responsible for maintaining any necessary metadata associated with the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] buffer Data to bypass. [in] transaction_id Unique transaction id that will be used by the CICM::BypassWrite::Stream::write_bypass_poll method to determine to which buffer the poll status applies. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN, S_BYPASS_DATARATE_EXCEEDED, S_BYPASS_DATALIMIT_EXCEEDED Lanz & Novikov Expires January 8, 2011 [Page 195] Internet-Draft CICM July 2010 Method CICM::BypassWrite::Stream::write_bypass_poll() CICM::Status write_bypass_poll( in CICM::TransId transaction_id, out CICM::WriteStream::WriteStatus status ); Returns the status of the non-blocking bypass operation specified by the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] transaction_id Unique transaction id previously specified to the CICM::BypassWrite::Stream::write_bypass_non_blocking method that allows the poll operation to determine to which buffer the poll status applies. [out] status Status of the non-blocking operation corresponding to the transaction_id parameter. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR 3.5.9.3. Interface CICM::BypassWrite::Controller Interface CICM::BypassWrite::Controller interface Controller : CICM::MultiDomainController {}; CICM::BypassWrite::Controller supports full bypass between two independent security domains. The resulting controller is capable of managing the channel, but not accepting data for bypass. It is created by calling CICM::ChannelManager:: create_bypass_write_controller. 3.5.9.3.1. CICM::BypassWrite::Controller Inheritance CICM::BypassWrite::Controller inherits from: CICM:: MultiDomainController. Lanz & Novikov Expires January 8, 2011 [Page 196] Internet-Draft CICM July 2010 3.5.9.4. Interface CICM::BypassWrite::Conduit Interface CICM::BypassWrite::Conduit interface Conduit : CICM::Conduit, CICM::BypassWrite::Controller, CICM::BypassWrite::Stream { CICM::BypassWrite::Conduit supports full bypass between two security domains. The resulting conduit is capable of both managing the channel and accepting data for bypass. It is created by calling CICM::ChannelManager::create_bypass_write_conduit. 3.5.9.4.1. CICM::BypassWrite::Conduit Inheritance CICM::BypassWrite::Conduit inherits from: CICM::Conduit, CICM:: BypassWrite::Controller and CICM::BypassWrite::Stream. 3.5.10. Bypass (Read) Channel Management Namespace CICM::BypassRead module BypassRead { The CICM::BypassRead namespace contains channels that support full bypass read operations between two independent security domains. {FIGURE REMOVED} Figure 35. Interface Relationship Diagram for Receiving Bypass Data 3.5.10.1. Interface CICM::BypassRead::ChannelManager Interface CICM::BypassRead::ChannelManager interface ChannelManager { CICM::BypassRead::ChannelManager is an abstraction inherited by CICM::ChannelManager that supports the creation of full bypass conduits, controllers, and streams for reading. See CICM:: ChannelManager for additional information. 3.5.10.1.1. CICM::BypassRead::ChannelManager Methods Method CICM::BypassRead::ChannelManager::create_bypass_read_conduit() CICM::Status create_bypass_read_conduit( in CICM::RemotePort remote_port, out CICM::BypassRead::Conduit conduit_ref ); Creates a conduit to read bypass data. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 197] Internet-Draft CICM July 2010 [in] remote_port Remote port. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::BypassRead::ChannelManager:: create_bypass_read_controller() CICM::Status create_bypass_read_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, out CICM::BypassRead::Controller controller_ref ); Returns the controller of a channel that reads bypass data. Remarks: In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. See also: CICM::BypassRead::ChannelManager::get_bypass_read_stream for the method that returns the channel stream. Parameters: [in] local_port Local port. [in] remote_port Remote port. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, Lanz & Novikov Expires January 8, 2011 [Page 198] Internet-Draft CICM July 2010 S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::BypassRead::ChannelManager::get_bypass_read_stream() CICM::Status get_bypass_read_stream( in CICM::LocalPort local_port, out CICM::BypassRead::Stream stream_ref ); Returns the stream corresponding to a pre-existing controller on the given local port. See also: CICM::BypassRead::ChannelManager::get_bypass_read_controller for the method that returns the channel controller. Parameters: [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND 3.5.10.2. Interface CICM::BypassRead::Stream Interface CICM::BypassRead::Stream interface Stream : CICM::ReadStream { CICM::BypassRead::Stream supports full bypass between two independent security domains. The resulting stream is capable of accepting bypassed data, but not managing the channel. It is created by calling CICM::ChannelManager::get_bypass_read_stream. 3.5.10.2.1. CICM::BypassRead::Stream Inheritance CICM::BypassRead::Stream inherits from: CICM::ReadStream. Lanz & Novikov Expires January 8, 2011 [Page 199] Internet-Draft CICM July 2010 3.5.10.2.2. CICM::BypassRead::Stream Methods Method CICM::BypassRead::Stream::read_bypass() CICM::Status read_bypass( out CICM::Buffer buffer ); Read bypass data off of channel stream. The method blocks until data becomes available. Parameters: [out] buffer Bypassed data read from module. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_BUFFER_LEN Method CICM::BypassRead::Stream::read_bypass_non_blocking() CICM::Status read_bypass_non_blocking( out CICM::Buffer buffer, in CICM::TransId transaction_id ); Registers a buffer into which bypass data will be copied, and then immediately returns control to the caller. The size of the allocated buffer and length of the resulting bypassed data is encapsulated in the buffer parameter. The caller may use the CICM::BypassRead:: Stream::read_bypass_poll method to proactively poll the channel to determine the status of the operation. The caller is responsible for maintaining any necessary metadata associated with the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [out] buffer Bypassed data to read. [in] transaction_id Unique transaction id that will be used by the CICM::BypassRead::Stream::read_bypass_poll method to determine to which buffer the poll status applies. Returns: Lanz & Novikov Expires January 8, 2011 [Page 200] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_BUFFER_LEN Method CICM::BypassRead::Stream::read_bypass_poll() CICM::Status read_bypass_poll( in CICM::TransId transaction_id, out CICM::ReadStream::ReadStatus status ); Returns the status of the non-blocking bypass operation specified by the transaction_id parameter. Upon completion of the operation, the caller must use the metadata associated with the transaction_id parameter to determine which buffer has been populated. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] transaction_id Unique transaction id previously specified to the CICM::BypassRead::Stream::read_bypass_non_blocking method that allows the poll operation to determine to which buffer the poll status applies. [out] status Status of the non-blocking operation corresponding to the transaction_id parameter. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR 3.5.10.3. Interface CICM::BypassRead::Controller Interface CICM::BypassRead::Controller interface Controller : CICM::MultiDomainController {}; CICM::BypassRead::Controller supports full bypass between two independent security domains. The resulting controller is capable of managing the channel, but not accepting bypassed data. It is created by calling CICM::ChannelManager::create_bypass_read_controller. Lanz & Novikov Expires January 8, 2011 [Page 201] Internet-Draft CICM July 2010 3.5.10.3.1. CICM::BypassRead::Controller Inheritance CICM::BypassRead::Controller inherits from: CICM:: MultiDomainController. 3.5.10.4. Interface CICM::BypassRead::Conduit Interface CICM::BypassRead::Conduit interface Conduit : CICM::Conduit, CICM::BypassRead::Controller, CICM::BypassRead::Stream { CICM::BypassRead::Conduit supports full bypass between two independent security domains. The resulting conduit is capable of both managing the channel and accepting bypassed data. It is created by calling CICM::ChannelManager::create_bypass_read_conduit. 3.5.10.4.1. CICM::BypassRead::Conduit Inheritance CICM::BypassRead::Conduit inherits from: CICM::Conduit, CICM:: BypassRead::Controller and CICM::BypassRead::Stream. 3.5.11. Encryption with Selective Bypass Channel Management Namespace CICM::EncryptBypass module EncryptBypass { The CICM::EncryptBypass namespace contains interfaces that support encryption with selective bypass operations between two indepenent security domains. {FIGURE REMOVED} Figure 36. Interface Relationship Diagram for Encryption Channels with Selective Bypass 3.5.11.1. Interface CICM::EncryptBypass::ChannelManager Interface CICM::EncryptBypass::ChannelManager interface ChannelManager { CICM::EncryptBypass::ChannelManager is an abstraction inherited by CICM::ChannelManager that supports the creation of encryption with selective bypass negotiators, conduits, controllers, and streams. See CICM::ChannelManager for additional information. Remarks: Note that if a system is using selective bypass channels to perform header bypass, policy may govern that a system performs Lanz & Novikov Expires January 8, 2011 [Page 202] Internet-Draft CICM July 2010 the bypass function before the encryption function and performs the bypass function only once. 3.5.11.1.1. CICM::EncryptBypass::ChannelManager Methods Method CICM::EncryptBypass::ChannelManager:: negotiate_encrypt_bypass_conduit() CICM::Status negotiate_encrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::EncryptBypass::Negotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer. The channel that results will selectively encrypt or bypass a stream of data. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 203] Internet-Draft CICM July 2010 Method CICM::EncryptBypass::ChannelManager:: negotiate_encrypt_bypass_controller() CICM::Status negotiate_encrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::EncryptBypass::ControllerNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer, resulting in a controller to manage an encrypt with bypass channel. Parameters: [in] local_port Remote port. [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 204] Internet-Draft CICM July 2010 Method CICM::EncryptBypass::ChannelManager:: create_encrypt_bypass_conduit() CICM::Status create_encrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::EncryptBypass::Conduit conduit_ref ); Create conduit to selectively encrypt or bypass a stream of data. Parameters: [in] remote_port Remote port. [in] key_ref Reference to encryption key. [in] algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::EncryptBypass::ChannelManager:: create_encrypt_bypass_controller() CICM::Status create_encrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::EncryptBypass::Controller controller_ref ); Create controller to configure and control an encrypt with bypass channel. Remarks: In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. Lanz & Novikov Expires January 8, 2011 [Page 205] Internet-Draft CICM July 2010 Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] key_ref Reference to encryption key. [in] algorithm Encryption algorithm/mode. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::EncryptBypass::ChannelManager:: get_encrypt_bypass_stream() CICM::Status get_encrypt_bypass_stream( in CICM::LocalPort local_port, out CICM::EncryptBypass::Stream stream_ref ); Create stream associated with previously created controller to accept data for transformation. Parameters: [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND Lanz & Novikov Expires January 8, 2011 [Page 206] Internet-Draft CICM July 2010 3.5.11.2. Interface CICM::EncryptBypass::Stream Interface CICM::EncryptBypass::Stream interface Stream : CICM::Encrypt::Stream, CICM::BypassWrite::Stream { CICM::EncryptBypass::Stream supports encryption and selective bypass operations between two independent security domains. The resulting stream is capable of accepting data for transformation, but not managing the channel. It is created by calling CICM:: ChannelManager::get_encrypt_bypass_stream. 3.5.11.2.1. CICM::EncryptBypass::Stream Inheritance CICM::EncryptBypass::Stream inherits from: CICM::Encrypt::Stream and CICM::BypassWrite::Stream. 3.5.11.3. Interface CICM::EncryptBypass::NegotiatedController Interface CICM::EncryptBypass::NegotiatedController interface NegotiatedController : CICM::Encrypt::NegotiatedController {}; CICM::EncryptBypass::NegotiatedController is the negotiated version of CICM::EncryptBypass::Controller. It is the result of a successful negotiation by CICM::EncryptBypass::ControllerNegotiator. 3.5.11.3.1. CICM::EncryptBypass::NegotiatedController Inheritance CICM::EncryptBypass::NegotiatedController inherits from: CICM:: Encrypt::NegotiatedController. 3.5.11.4. Interface CICM::EncryptBypass::Controller Interface CICM::EncryptBypass::Controller interface Controller : CICM::Encrypt::Controller {}; CICM::EncryptBypass::Controller supports encryption and selective bypass operations between two independent security domains. The resulting controller is capable of managing the channel, but not accepting data for transformation/bypass. It is created by calling CICM::ChannelManager::create_encrypt_bypass_controller. 3.5.11.4.1. CICM::EncryptBypass::Controller Inheritance CICM::EncryptBypass::Controller inherits from: CICM::Encrypt:: Controller. Lanz & Novikov Expires January 8, 2011 [Page 207] Internet-Draft CICM July 2010 3.5.11.5. Interface CICM::EncryptBypass::Conduit Interface CICM::EncryptBypass::Conduit interface Conduit : CICM::Encrypt::Conduit, CICM::EncryptBypass::Stream { CICM::EncryptBypass::Conduit supports encryption and selective bypass operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting data for transformation/bypass. It is created by calling CICM:: ChannelManager::create_encrypt_bypass_conduit. 3.5.11.5.1. CICM::EncryptBypass::Conduit Inheritance CICM::EncryptBypass::Conduit inherits from: CICM::Encrypt::Conduit and CICM::EncryptBypass::Stream. 3.5.11.6. Interface CICM::EncryptBypass::NegotiatedConduit Interface CICM::EncryptBypass::NegotiatedConduit interface NegotiatedConduit : CICM::Encrypt::NegotiatedController, CICM::EncryptBypass::Stream { CICM::EncryptBypass::NegotiatedConduit is the negotiated version of CICM::EncryptBypass::Conduit. It is the result of a successful negotiation by CICM::EncryptBypass::Negotiator. 3.5.11.6.1. CICM::EncryptBypass::NegotiatedConduit Inheritance CICM::EncryptBypass::NegotiatedConduit inherits from: CICM::Encrypt:: NegotiatedController and CICM::EncryptBypass::Stream. 3.5.11.7. Interface CICM::EncryptBypass::ControllerNegotiator Interface CICM::EncryptBypass::ControllerNegotiator interface ControllerNegotiator : CICM::Negotiator { CICM::EncryptBypass::ControllerNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption and selective bypass operations between two independent security domains. The result of a successful negotiation is a CICM:: EncryptBypass::NegotiatedController which is capable of managing the channel, but not accepting data for transformation/bypass. CICM:: EncryptBypass::ControllerNegotiator is created by calling CICM:: ChannelManager::negotiate_encrypt_bypass_controller. Lanz & Novikov Expires January 8, 2011 [Page 208] Internet-Draft CICM July 2010 3.5.11.7.1. CICM::EncryptBypass::ControllerNegotiator Inheritance CICM::EncryptBypass::ControllerNegotiator inherits from: CICM:: Negotiator. 3.5.11.7.2. CICM::EncryptBypass::ControllerNegotiator Methods Method CICM::EncryptBypass::ControllerNegotiator::complete() CICM::Status complete( out CICM::EncryptBypass::NegotiatedController controller_ref ); Complete negotiation and retrieve a negotiated encrypt bypass control-only channel. Parameters: [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.11.8. Interface CICM::EncryptBypass::Negotiator Interface CICM::EncryptBypass::Negotiator interface Negotiator : CICM::Negotiator { CICM::EncryptBypass::Negotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption and bypass operations between two independent security domains. Additionally, selective bypass is supported on the same conduit. The result of a successful negotiation is a CICM::EncryptBypass:: NegotiatedConduit which is capable of both managing the channel and accepting data for transformation/bypass. CICM::EncryptBypass:: Negotiator is created by calling CICM::ChannelManager:: negotiate_encrypt_bypass_conduit. 3.5.11.8.1. CICM::EncryptBypass::Negotiator Inheritance CICM::EncryptBypass::Negotiator inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 209] Internet-Draft CICM July 2010 3.5.11.8.2. CICM::EncryptBypass::Negotiator Methods Method CICM::EncryptBypass::Negotiator::complete() CICM::Status complete( out CICM::EncryptBypass::NegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated encrypt bypass conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CHANNEL_PEER_RESET 3.5.12. Decryption with Selective Bypass Channel Management Namespace CICM::DecryptBypass module DecryptBypass { The CICM::DecryptBypass namespace contains interfaces that support decryption with selective bypass operations between two independent security domains. {FIGURE REMOVED} Figure 37. Interface Relationship Diagram for Decryption Channels with Selective Bypass 3.5.12.1. Interface CICM::DecryptBypass::ChannelManager Interface CICM::DecryptBypass::ChannelManager interface ChannelManager { CICM::DecryptBypass::ChannelManager is an abstraction inherited by CICM::ChannelManager that supports the creation of decryption with selective bypass negotiators, conduits, controllers, and streams. See CICM::ChannelManager for additional information. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 210] Internet-Draft CICM July 2010 CICM does not specify the structure of the data that is read from a selective bypass channel which may contain special formatting to indicate which subset of the data was bypassed. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for data read from selective bypass channels. 3.5.12.1.1. CICM::DecryptBypass::ChannelManager Methods Method CICM::DecryptBypass::ChannelManager:: negotiate_decrypt_bypass_conduit() CICM::Status negotiate_decrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::DecryptBypass::Negotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer. The channel that results will selectively decrypt or bypass a stream of data. Parameters: [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 211] Internet-Draft CICM July 2010 Method CICM::DecryptBypass::ChannelManager:: negotiate_decrypt_bypass_controller() CICM::Status negotiate_decrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::DecryptBypass::ControllerNegotiator negotiator_ref ); Initiate a negotiation to establish a shared key with a peer, resulting in a controller to manage a decrypt with bypass channel. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] protocol Protocol identifier. [in] key_ref Reference to negotiation key. [out] negotiator_ref Reference to resulting negotiator. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_PROTO_INVALID, S_PROTO_INCOMPATIBLE, S_PROTO_UNDETERMINED, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 212] Internet-Draft CICM July 2010 Method CICM::DecryptBypass::ChannelManager:: create_decrypt_bypass_conduit() CICM::Status create_decrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::DecryptBypass::Conduit conduit_ref ); Create conduit to selectively decrypt or bypass a stream of data. Remarks: Both decrypted and bypassed data are read from the same stream using the appropriate decrypt() call; the entity reading from this stream must distinguish between decrypted and bypassed data, if necessary. Parameters: [in] remote_port Remote port. [in] key_ref Reference to decryption key. [in] algorithm Decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 213] Internet-Draft CICM July 2010 Method CICM::DecryptBypass::ChannelManager:: create_decrypt_bypass_controller() CICM::Status create_decrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::DecryptBypass::Controller controller_ref ); Create controller to configure and control a decrypt with bypass channel. Remarks: In some cases, hosts may depend upon separate processes to control and use a channel. This method returns the channel controller and must be called before the corresponding stream is retrieved. Parameters: [in] local_port Local port. [in] remote_port Remote port. [in] key_ref Reference to decryption key. [in] algorithm Decryption algorithm/mode. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 214] Internet-Draft CICM July 2010 Method CICM::DecryptBypass::ChannelManager:: get_decrypt_bypass_stream() CICM::Status get_decrypt_bypass_stream( in CICM::LocalPort local_port, out CICM::DecryptBypass::Stream stream_ref ); Create stream associated with previously created controller to receive transformed data. Remarks: Both decrypted and bypassed data are read from the same stream using the appropriate decrypt() call; the entity reading from this stream must distinguish between decrypted and bypassed data, if necessary. Parameters: [in] local_port Local port. [out] stream_ref Reference to resulting stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_LOCAL_PORT_INVALID, S_LOCAL_PORT_INCOMPATIBLE, S_LOCAL_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_NOT_FOUND 3.5.12.2. Interface CICM::DecryptBypass::Stream Interface CICM::DecryptBypass::Stream interface Stream : CICM::Decrypt::Stream {}; CICM::DecryptBypass::Stream supports decryption and selective bypass operations between two independent security domains. The resulting stream is capable of accepting transformed/bypassed data, but not managing the channel. It is created by calling CICM:: ChannelManager::get_decrypt_bypass_stream. Remarks: CICM does not specify the structure of the data that is read from a selective bypass channel which may contain special formatting to indicate which subset of the data was bypassed. The Lanz & Novikov Expires January 8, 2011 [Page 215] Internet-Draft CICM July 2010 Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module developer-specific format implemented by the module for data read from selective bypass channels. 3.5.12.2.1. CICM::DecryptBypass::Stream Inheritance CICM::DecryptBypass::Stream inherits from: CICM::Decrypt::Stream. 3.5.12.3. Interface CICM::DecryptBypass::Controller Interface CICM::DecryptBypass::Controller interface Controller : CICM::Decrypt::Controller { CICM::DecryptBypass::Controller supports decryption and selective bypass operations between two independent security domains. The resulting controller is capable of managing the channel, but not accepting transformed/bypassed data. It is created by calling CICM:: ChannelManager::create_decrypt_bypass_controller. 3.5.12.3.1. CICM::DecryptBypass::Controller Inheritance CICM::DecryptBypass::Controller inherits from: CICM::Decrypt:: Controller. 3.5.12.4. Interface CICM::DecryptBypass::NegotiatedController Interface CICM::DecryptBypass::NegotiatedController interface NegotiatedController : CICM::Decrypt::NegotiatedController { CICM::DecryptBypass::NegotiatedController is the negotiated version of CICM::DecryptBypass::Controller. It is the result of a successful negotiation by CICM::DecryptBypass::ControllerNegotiator. 3.5.12.4.1. CICM::DecryptBypass::NegotiatedController Inheritance CICM::DecryptBypass::NegotiatedController inherits from: CICM:: Decrypt::NegotiatedController. 3.5.12.5. Interface CICM::DecryptBypass::Conduit Interface CICM::DecryptBypass::Conduit interface Conduit : CICM::Decrypt::Conduit, CICM::DecryptBypass::Controller, CICM::DecryptBypass::Stream { CICM::DecryptBypass::Conduit supports decryption and selective bypass operations between two independent security domains. The resulting conduit is capable of both managing the channel and accepting transformed/bypassed data. It is created by calling CICM:: Lanz & Novikov Expires January 8, 2011 [Page 216] Internet-Draft CICM July 2010 ChannelManager::create_decrypt_bypass_conduit. 3.5.12.5.1. CICM::DecryptBypass::Conduit Inheritance CICM::DecryptBypass::Conduit inherits from: CICM::Decrypt::Conduit, CICM::DecryptBypass::Controller and CICM::DecryptBypass::Stream. 3.5.12.6. Interface CICM::DecryptBypass::NegotiatedConduit Interface CICM::DecryptBypass::NegotiatedConduit interface NegotiatedConduit : CICM::Decrypt::NegotiatedConduit, CICM::DecryptBypass::NegotiatedController, CICM::DecryptBypass::Stream { CICM::DecryptBypass::NegotiatedConduit is the negotiated version of CICM::DecryptBypass::Conduit. It is the result of a successful negotiation by CICM::DecryptBypass::Negotiator. 3.5.12.6.1. CICM::DecryptBypass::NegotiatedConduit Inheritance CICM::DecryptBypass::NegotiatedConduit inherits from: CICM::Decrypt:: NegotiatedConduit, CICM::DecryptBypass::NegotiatedController and CICM::DecryptBypass::Stream. 3.5.12.7. Interface CICM::DecryptBypass::ControllerNegotiator Interface CICM::DecryptBypass::ControllerNegotiator interface ControllerNegotiator : CICM::Negotiator { CICM::DecryptBypass::ControllerNegotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption and selective bypass operations between two independent security domains. The result of a successful negotiation is a CICM:: DecryptBypass::NegotiatedController which is capable of managing the channel, but not accepting data for transformation. CICM:: DecryptBypass::ControllerNegotiator is created by calling CICM:: ChannelManager::negotiate_decrypt_bypass_controller. 3.5.12.7.1. CICM::DecryptBypass::ControllerNegotiator Inheritance CICM::DecryptBypass::ControllerNegotiator inherits from: CICM:: Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 217] Internet-Draft CICM July 2010 3.5.12.7.2. CICM::DecryptBypass::ControllerNegotiator Methods Method CICM::DecryptBypass::ControllerNegotiator::complete() CICM::Status complete( out CICM::DecryptBypass::NegotiatedController controller_ref ); Complete negotiation and retrieve a negotiated control-only decrypt bypass channel. Parameters: [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.12.8. Interface CICM::DecryptBypass::Negotiator Interface CICM::DecryptBypass::Negotiator interface Negotiator : CICM::Negotiator { CICM::DecryptBypass::Negotiator initiates a negotiation to establish a shared key with a remote entity that is used to support encryption operations between two independent security domains. Additionally, selective bypass is supported on the same conduit. The result of a successful negotiation is a CICM::DecryptBypass::NegotiatedConduit which is capable of both managing the channel and accepting data for transformation. CICM::DecryptBypass::Negotiator is created by calling CICM::ChannelManager::negotiate_decrypt_bypass_conduit. 3.5.12.8.1. CICM::DecryptBypass::Negotiator Inheritance CICM::DecryptBypass::Negotiator inherits from: CICM::Negotiator. Lanz & Novikov Expires January 8, 2011 [Page 218] Internet-Draft CICM July 2010 3.5.12.8.2. CICM::DecryptBypass::Negotiator Methods Method CICM::DecryptBypass::Negotiator::complete() CICM::Status complete( out CICM::DecryptBypass::NegotiatedConduit conduit_ref ); Complete negotiation and retrieve a negotiated decrypt bypass conduit. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_NEGOTIATION_ABORTED, S_NEGOTIATION_FAILURE, S_NEGOTIATION_NOT_IN_PROGRESS, S_NEGOTIATION_TIMEOUT, S_CERT_LOCAL_INVALID, S_CERT_LOCAL_EXPIRED, S_CERT_REMOTE_INVALID, S_CERT_REMOTE_EXPIRED, S_CERT_REMOTE_PATH, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET 3.5.13. Random, Pseudorandom and Keystream Channel Management Namespace CICM::Emit module Emit { The CICM::Emit namespace contains interfaces that generate data originating in a cryptographic module such as random, pseudorandom, and keystream data. {FIGURE REMOVED} Figure 38. Interface Relationship Diagram for Keystream Generation and Random Channels 3.5.13.1. Interface CICM::Emit::ChannelManager Interface CICM::Emit::ChannelManager interface ChannelManager { CICM::Emit::ChannelManager is an abstraction inherited by CICM:: ChannelManager that supports the creation of conduits and controllers to generate keystream, pseudorandom, and random data. See CICM:: ChannelManager for additional information. Lanz & Novikov Expires January 8, 2011 [Page 219] Internet-Draft CICM July 2010 3.5.13.1.1. CICM::Emit::ChannelManager Methods Method CICM::Emit::ChannelManager::create_key_stream_gen_controller() CICM::Status create_key_stream_gen_controller( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Emit::KeyStreamGenController controller_ref ); Create controller to generate keystream. Parameters: [in] remote_port Remote port. [in] key_ref Reference to keystream generation key. [in] algorithm Keystream generation algorithm/mode. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Emit::ChannelManager::create_pseudorandom_controller() CICM::Status create_pseudorandom_controller( in CICM::RemotePort remote_port, in CICM::SymKey seed, out CICM::Emit::PseudoRandomController controller_ref ); Create controller to generate pseudorandom data. Parameters: [in] remote_port Remote port. [in] seed Seed material for pseudorandom generator. Lanz & Novikov Expires January 8, 2011 [Page 220] Internet-Draft CICM July 2010 [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX, S_INSUFFICIENT_ENTROPY Method CICM::Emit::ChannelManager::create_random_controller() CICM::Status create_random_controller( in CICM::RemotePort remote_port, out CICM::Emit::RandomController controller_ref ); Create controller to generate random data. Parameters: [in] remote_port Remote port. [out] controller_ref Reference to resulting controller. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_REMOTE_PORT_INVALID, S_REMOTE_PORT_IN_USE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX, S_INSUFFICIENT_ENTROPY Method CICM::Emit::ChannelManager::create_key_stream_gen_conduit() CICM::Status create_key_stream_gen_conduit( in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Emit::KeyStreamGenConduit conduit_ref ); Create conduit to generate keystream. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 221] Internet-Draft CICM July 2010 [in] key_ref Reference to keystream generation key. [in] algorithm Keystream generation algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Emit::ChannelManager::create_pseudorandom_conduit() CICM::Status create_pseudorandom_conduit( in CICM::SymKey seed, out CICM::Emit::PseudoRandomConduit conduit_ref ); Create conduit to generate pseudorandom data. Parameters: [in] seed Seed material for pseudorandom generator. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX, S_INSUFFICIENT_ENTROPY Lanz & Novikov Expires January 8, 2011 [Page 222] Internet-Draft CICM July 2010 Method CICM::Emit::ChannelManager::create_random_conduit() CICM::Status create_random_conduit( out CICM::Emit::RandomConduit conduit_ref ); Create conduit to generate random data. Parameters: [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX, S_INSUFFICIENT_ENTROPY 3.5.13.2. Interface CICM::Emit::GetStream Interface CICM::Emit::GetStream interface GetStream : CICM::ReadStream { CICM::Emit::GetStream is an abstraction inherited by conduits in the CICM::Emit namespace that allows data to be read from the stream. 3.5.13.2.1. CICM::Emit::GetStream Inheritance CICM::Emit::GetStream inherits from: CICM::ReadStream. 3.5.13.2.2. CICM::Emit::GetStream Methods Method CICM::Emit::GetStream::get() CICM::Status get( in CICM::UInt32 length, out CICM::Buffer buffer ); Reads a buffer of data from the module. The method blocks until data becomes available. Parameters: [in] length Number of bytes to retrieve. [out] buffer Buffer of data read from stream. Returns: Lanz & Novikov Expires January 8, 2011 [Page 223] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_BUFFER_LEN, S_INSUFFICIENT_ENTROPY Method CICM::Emit::GetStream::get_non_blocking() CICM::Status get_non_blocking( in CICM::UInt32 length, out CICM::Buffer buffer, in CICM::TransId transaction_id ); Registers a buffer into which transformed data will be copied, and then control immediately returns to the caller. The size of the allocated buffer and length of the resulting transformed data is encapsulated in the buffer parameter. The caller may use the CICM:: Emit::GetStream::get_poll method to proactively poll the channel to determine the status of the operation. The caller is responsible for maintaining any necessary metadata associated with the transaction_id parameter. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] length Number of bytes to retrieve. [out] buffer Transformed data. [in] transaction_id Unique transaction id that will be used by the CICM::Emit::GetStream::get_poll method to determine to which buffer the poll status applies. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR, S_CHANNEL_BUFFER_LEN, S_INSUFFICIENT_ENTROPY Lanz & Novikov Expires January 8, 2011 [Page 224] Internet-Draft CICM July 2010 Method CICM::Emit::GetStream::get_poll() CICM::Status get_poll( in CICM::TransId transaction_id, out CICM::ReadStream::ReadStatus status ); Returns the status of the non-blocking get operation specified by the transaction_id parameter. Upon completion of the operation, the caller must use the metadata associated with the transaction_id parameter to determine which buffer has been populated. Memory responsibilities and calling conventions shall follow the appropriate IDL language mapping conventions. Parameters: [in] transaction_id Unique transaction id previously specified to the CICM::Emit::GetStream::get_non_blocking method that allows the poll operation to determine to which buffer the poll status applies. [out] status Status of the non-blocking operation corresponding to the transaction_id parameter. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_KEY_WRAPPED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_PEER_RESET, S_CHANNEL_IO_ERROR 3.5.13.3. Interface CICM::Emit::Controller Interface CICM::Emit::Controller interface Controller : CICM::Controller { CICM::Emit::Controller is an abstraction from which all other controllers in the CICM::Emit namespace inherit. 3.5.13.3.1. CICM::Emit::Controller Inheritance CICM::Emit::Controller inherits from: CICM::Controller. Lanz & Novikov Expires January 8, 2011 [Page 225] Internet-Draft CICM July 2010 3.5.13.3.2. CICM::Emit::Controller Attributes AttributeCICM::Emit::Controller::remote_port readonly attribute CICM::RemotePort remote_port; The remote port associated with this controller. 3.5.13.4. Interface CICM::Emit::RandomController Interface CICM::Emit::RandomController interface RandomController : CICM::Emit::Controller {}; CICM::Emit::RandomController supports creating a channel to read random data from a module. The resulting controller is capable of managing the channel, but not reading random data. It is created by calling CICM::ChannelManager::create_random_controller. 3.5.13.4.1. CICM::Emit::RandomController Inheritance CICM::Emit::RandomController inherits from: CICM::Emit::Controller. 3.5.13.5. Interface CICM::Emit::RandomConduit Interface CICM::Emit::RandomConduit interface RandomConduit : CICM::Conduit, CICM::Emit::GetStream { CICM::Emit::RandomConduit supports reading random data from a module. The resulting conduit is capable of both managing the channel and reading random data. It is created by calling CICM::ChannelManager:: create_random_conduit. 3.5.13.5.1. CICM::Emit::RandomConduit Inheritance CICM::Emit::RandomConduit inherits from: CICM::Conduit and CICM:: Emit::GetStream. 3.5.13.6. Interface CICM::Emit::PseudoRandomController Interface CICM::Emit::PseudoRandomController interface PseudoRandomController : CICM::SymKeyController, CICM::Emit::Controller { CICM::Emit::PseudoRandomController supports creating a channel to read pseudorandom data from a module. The resulting controller is capable of managing the channel, but not reading pseudorandom data. It is created by calling CICM::ChannelManager:: create_pseudorandom_controller. Lanz & Novikov Expires January 8, 2011 [Page 226] Internet-Draft CICM July 2010 3.5.13.6.1. CICM::Emit::PseudoRandomController Inheritance CICM::Emit::PseudoRandomController inherits from: CICM:: SymKeyController and CICM::Emit::Controller. 3.5.13.7. Interface CICM::Emit::PseudoRandomConduit Interface CICM::Emit::PseudoRandomConduit interface PseudoRandomConduit : CICM::Conduit, CICM::SymKeyController, CICM::Emit::GetStream { CICM::Emit::PseudoRandomConduit supports reading pseudorandom data from a module. The resulting conduit is capable of both managing the channel and reading pseudorandom data. It is created by calling CICM::ChannelManager::create_pseudorandom_conduit. 3.5.13.7.1. CICM::Emit::PseudoRandomConduit Inheritance CICM::Emit::PseudoRandomConduit inherits from: CICM::Conduit, CICM:: SymKeyController and CICM::Emit::GetStream. 3.5.13.8. Interface CICM::Emit::KeyStreamGenController Interface CICM::Emit::KeyStreamGenController interface KeyStreamGenController : CICM::SymKeyController, CICM::GenVectorController, CICM::Emit::Controller { CICM::Emit::KeyStreamGenController supports creating a channel to read keystream from a module. The resulting controller is capable of managing the channel, but not reading keystream. It is created by calling CICM::ChannelManager::create_key_stream_gen_controller. 3.5.13.8.1. CICM::Emit::KeyStreamGenController Inheritance CICM::Emit::KeyStreamGenController inherits from: CICM:: SymKeyController, CICM::GenVectorController and CICM::Emit:: Controller. Lanz & Novikov Expires January 8, 2011 [Page 227] Internet-Draft CICM July 2010 3.5.13.9. Interface CICM::Emit::KeyStreamGenConduit Interface CICM::Emit::KeyStreamGenConduit interface KeyStreamGenConduit : CICM::Conduit, CICM::SymKeyController, CICM::GenVectorController, CICM::Emit::GetStream { CICM::Emit::KeyStreamGenConduit supports reading keystream from a module. The resulting conduit is capable of both managing the channel and reading keystream. It is created by calling CICM:: ChannelManager::create_key_stream_gen_conduit. 3.5.13.9.1. CICM::Emit::KeyStreamGenConduit Inheritance CICM::Emit::KeyStreamGenConduit inherits from: CICM::Conduit, CICM:: SymKeyController, CICM::GenVectorController and CICM::Emit:: GetStream. 3.5.14. Integrity Channel Management Namespace CICM::Answer module Answer { The CICM::Answer namespace contains interfaces that support cryptographic operations that return an "answer" such a hash or a signature within a single security domain. {FIGURE REMOVED} Figure 39. Interface Relationship Diagram for Channels that Return an "Answer" 3.5.14.1. Interface CICM::Answer::ChannelManager Interface CICM::Answer::ChannelManager interface ChannelManager { CICM::Answer::ChannelManager is an abstraction inherited by CICM:: ChannelManager that supports the creation of conduits to sign, MAC, and hash data. See CICM::ChannelManager for additional information. Lanz & Novikov Expires January 8, 2011 [Page 228] Internet-Draft CICM July 2010 3.5.14.1.1. CICM::Answer::ChannelManager Methods Method CICM::Answer::ChannelManager::create_hash_conduit() CICM::Status create_hash_conduit( in CICM::HashAlgorithmId algorithm, out CICM::Answer::HashConduit conduit_ref ); Create conduit to calculate and generate a hash value. Parameters: [in] algorithm Hash algorithm. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Answer::ChannelManager::create_mac_conduit() CICM::Status create_mac_conduit( in CICM::SymKey key_ref, in CICM::SymMacAlgorithmId algorithm, out CICM::Answer::MACConduit conduit_ref ); Create conduit to calculate and generate a MAC. Parameters: [in] key_ref Reference to MAC key. [in] algorithm MAC algorithm. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, Lanz & Novikov Expires January 8, 2011 [Page 229] Internet-Draft CICM July 2010 S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Answer::ChannelManager::create_mac_verify_conduit() CICM::Status create_mac_verify_conduit( in CICM::SymKey key_ref, in CICM::SymMacAlgorithmId algorithm, out CICM::Answer::MACVerifyConduit conduit_ref ); Create conduit to verify a MAC. Parameters: [in] key_ref Reference to verification key. [in] algorithm MAC algorithm. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Answer::ChannelManager::create_sign_conduit() CICM::Status create_sign_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::SignConduit conduit_ref ); Create conduit to calculate and generate a signature. Parameters: [in] key_ref Reference to signature key. [in] algorithm Signature algorithm. [out] conduit_ref Reference to resulting conduit. Returns: Lanz & Novikov Expires January 8, 2011 [Page 230] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Answer::ChannelManager::create_sign_hash_conduit() CICM::Status create_sign_hash_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::SignHashConduit conduit_ref ); Create conduit to calculate and generate a signature accepting a previously generated hash value as input. Parameters: [in] key_ref Reference to signature key. [in] algorithm Signature algorithm. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Answer::ChannelManager::create_verify_conduit() CICM::Status create_verify_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::VerifyConduit conduit_ref ); Create conduit to verify a signature. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 231] Internet-Draft CICM July 2010 [in] key_ref Reference to verification key. [in] algorithm Verification algorithm. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Answer::ChannelManager::create_verify_hash_conduit() CICM::Status create_verify_hash_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::VerifyHashConduit conduit_ref ); Create conduit to verify a signature accepting a previously generated hash value as input. Parameters: [in] key_ref Reference to verification key. [in] algorithm Verification algorithm. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 232] Internet-Draft CICM July 2010 3.5.14.2. Interface CICM::Answer::PutStream Interface CICM::Answer::PutStream interface PutStream : CICM::Stream { A stream that can write data to a module. 3.5.14.2.1. CICM::Answer::PutStream Inheritance CICM::Answer::PutStream inherits from: CICM::Stream. 3.5.14.2.2. CICM::Answer::PutStream Methods Method CICM::Answer::PutStream::put() CICM::Status put( in CICM::Buffer buffer ); Sends data to the module for transformation. Remarks: This method blocks until the data is sent to the module. Parameters: [in] buffer Buffer to write to the module. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN 3.5.14.3. Interface CICM::Answer::HashConduit Interface CICM::Answer::HashConduit interface HashConduit : CICM::Conduit, CICM::Answer::PutStream { CICM::Answer::HashConduit supports hashing operations within a single security domain. It is created by calling CICM::ChannelManager:: create_hash_conduit. Remarks: Lanz & Novikov Expires January 8, 2011 [Page 233] Internet-Draft CICM July 2010 Keyed hashes are supported by MAC channels. 3.5.14.3.1. CICM::Answer::HashConduit Inheritance CICM::Answer::HashConduit inherits from: CICM::Conduit and CICM:: Answer::PutStream. 3.5.14.3.2. CICM::Answer::HashConduit Attributes AttributeCICM::Answer::HashConduit::algorithm readonly attribute CICM::HashAlgorithmId algorithm; Algorithm used to compute the hash. 3.5.14.3.3. CICM::Answer::HashConduit Methods Method CICM::Answer::HashConduit::end_get_hash() CICM::Status end_get_hash( out HashBuffer hash ); Direct the module to compute and output the message digest value, and reset the conduit to accept additional data. Parameters: [out] hash Resulting hash. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR 3.5.14.4. Interface CICM::Answer::MACConduit Interface CICM::Answer::MACConduit interface MACConduit : CICM::AbstractMACConduit, CICM::Answer::PutStream { CICM::Answer::MACConduit supports message authentication code operations within a single security domain. It is created by calling CICM::ChannelManager::create_mac_conduit. 3.5.14.4.1. CICM::Answer::MACConduit Inheritance CICM::Answer::MACConduit inherits from: CICM::AbstractMACConduit and CICM::Answer::PutStream. Lanz & Novikov Expires January 8, 2011 [Page 234] Internet-Draft CICM July 2010 3.5.14.5. Interface CICM::Answer::MACVerifyConduit Interface CICM::Answer::MACVerifyConduit interface MACVerifyConduit : CICM::AbstractMACVerifyConduit, CICM::Answer::PutStream { CICM::Answer::MACVerifyConduit supports message authentication code verification operations within a single security domain. It is created by calling CICM::ChannelManager::create_mac_verify_conduit. 3.5.14.5.1. CICM::Answer::MACVerifyConduit Inheritance CICM::Answer::MACVerifyConduit inherits from: CICM:: AbstractMACVerifyConduit and CICM::Answer::PutStream. 3.5.14.6. Interface CICM::Answer::SignConduit Interface CICM::Answer::SignConduit interface SignConduit : CICM::AbstractSignConduit, CICM::Answer::PutStream { CICM::Answer::SignConduit supports signature operations within a single security domain. It is created by calling CICM:: ChannelManager::create_sign_conduit. 3.5.14.6.1. CICM::Answer::SignConduit Inheritance CICM::Answer::SignConduit inherits from: CICM::AbstractSignConduit and CICM::Answer::PutStream. 3.5.14.7. Interface CICM::Answer::SignHashConduit Interface CICM::Answer::SignHashConduit interface SignHashConduit : CICM::Answer::SignConduit {}; CICM::Answer::SignHashConduit supports signature operations accepting a pre-generated hash value within a single security domain. It is created by calling CICM::ChannelManager::create_sign_hash_conduit. 3.5.14.7.1. CICM::Answer::SignHashConduit Inheritance CICM::Answer::SignHashConduit inherits from: CICM::Answer:: SignConduit. Lanz & Novikov Expires January 8, 2011 [Page 235] Internet-Draft CICM July 2010 3.5.14.8. Interface CICM::Answer::VerifyConduit Interface CICM::Answer::VerifyConduit interface VerifyConduit : CICM::AbstractSigVerifyConduit, CICM::Answer::PutStream { CICM::Answer::VerifyConduit supports verification operations within a single security domain. It is created by calling CICM:: ChannelManager::create_verify_conduit. 3.5.14.8.1. CICM::Answer::VerifyConduit Inheritance CICM::Answer::VerifyConduit inherits from: CICM:: AbstractSigVerifyConduit and CICM::Answer::PutStream. 3.5.14.9. Interface CICM::Answer::VerifyHashConduit Interface CICM::Answer::VerifyHashConduit interface VerifyHashConduit : CICM::Answer::VerifyConduit {}; CICM::Answer::VerifyHashConduit supports verification operations accepting a pre-generated hash value within a single security domain. It is created by calling CICM::ChannelManager:: create_verify_hash_conduit. 3.5.14.9.1. CICM::Answer::VerifyHashConduit Inheritance CICM::Answer::VerifyHashConduit inherits from: CICM::Answer:: VerifyConduit. 3.5.15. Single-Domain Channel Management Namespace CICM::Coprocessor module Coprocessor { The CICM::Coprocessor namespace contains interfaces that support encryption/decryption operations within a single security domain. {FIGURE REMOVED} Figure 40. Interface Relationship Diagram for Single-Domain Encryption Channels {FIGURE REMOVED} Figure 41. Interface Relationship Diagram for Single-Domain Decryption Channels Lanz & Novikov Expires January 8, 2011 [Page 236] Internet-Draft CICM July 2010 3.5.15.1. Interface CICM::Coprocessor::ChannelManager Interface CICM::Coprocessor::ChannelManager interface ChannelManager { CICM::Coprocessor::ChannelManager is an abstraction inherited by CICM::ChannelManager that supports the creation of conduits to encrypt and decrypt data within a single security domain. See CICM:: ChannelManager for additional information. 3.5.15.1.1. CICM::Coprocessor::ChannelManager Methods Method CICM::Coprocessor::ChannelManager:: create_coprocessor_encrypt_conduit() CICM::Status create_coprocessor_encrypt_conduit( in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Coprocessor::EncryptConduit conduit_ref ); Create conduit to encrypt a stream of data within a single security domain. Parameters: [in] key_ref Reference to encryption key. [in] algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 237] Internet-Draft CICM July 2010 Method CICM::Coprocessor::ChannelManager:: create_coprocessor_encrypt_with_mac_conduit() CICM::Status create_coprocessor_encrypt_with_mac_conduit( in CICM::SymKey mac_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, in CICM::SymEncrAlgorithmId encrypt_algorithm, out CICM::Coprocessor::EncryptWithMACConduit conduit_ref ); Create conduit to MAC and encrypt a stream of data within a single security domain. Parameters: [in] mac_key_ref Reference to MAC key. [in] encrypt_key_ref Reference to encryption key. [in] mac_algorithm MAC algorithm. [in] encrypt_algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Coprocessor::ChannelManager:: create_coprocessor_encrypt_with_sign_conduit() CICM::Status create_coprocessor_encrypt_with_sign_conduit( in CICM::AsymKey sign_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::AsymSigAlgorithmId sign_algorithm, in CICM::SymEncrAlgorithmId encrypt_algorithm, out CICM::Coprocessor::EncryptWithSignConduit conduit_ref ); Create conduit to sign and encrypt a stream of data within a single security domain. Parameters: Lanz & Novikov Expires January 8, 2011 [Page 238] Internet-Draft CICM July 2010 [in] sign_key_ref Reference to signature key. [in] encrypt_key_ref Reference to encryption key. [in] sign_algorithm Signature algorithm. [in] encrypt_algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Method CICM::Coprocessor::ChannelManager:: create_coprocessor_decrypt_conduit() CICM::Status create_coprocessor_decrypt_conduit( in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Coprocessor::DecryptConduit conduit_ref ); Create conduit to decrypt a stream of data within a single security domain. Parameters: [in] key_ref Reference to decryption key. [in] algorithm Decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, Lanz & Novikov Expires January 8, 2011 [Page 239] Internet-Draft CICM July 2010 S_CHANNEL_MAX Method CICM::Coprocessor::ChannelManager:: create_coprocessor_decrypt_with_mac_conduit() CICM::Status create_coprocessor_decrypt_with_mac_conduit( in CICM::SymKey mac_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, in CICM::SymEncrAlgorithmId encrypt_algorithm, out CICM::Coprocessor::DecryptWithMACConduit conduit_ref ); Create conduit to MAC verify and decrypt a stream of data within a single security domain. Parameters: [in] mac_key_ref Reference to MAC key. [in] decrypt_key_ref Reference to decryption key. [in] mac_algorithm MAC algorithm. [in] encrypt_algorithm Encryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX Lanz & Novikov Expires January 8, 2011 [Page 240] Internet-Draft CICM July 2010 Method CICM::Coprocessor::ChannelManager:: create_coprocessor_decrypt_with_verify_conduit() CICM::Status create_coprocessor_decrypt_with_verify_conduit( in CICM::AsymKey verify_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::AsymSigAlgorithmId verify_algorithm, in CICM::SymEncrAlgorithmId decrypt_algorithm, out CICM::Coprocessor::DecryptWithVerifyConduit conduit_ref ); Create conduit to verify and decrypt a stream of data within a single security domain. Parameters: [in] verify_key_ref Reference to verification key. [in] decrypt_key_ref Reference to decryption key. [in] verify_algorithm Verification algorithm. [in] decrypt_algorithm Decryption algorithm/mode. [out] conduit_ref Reference to resulting conduit. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_USED_INVALID, S_KEY_USED_EXPIRED, S_KEY_USED_WRAPPED, S_KEY_USED_CONTEXT, S_KEY_USED_COMPONENT_NOT_AVAIL, S_KEY_INVALID, S_KEY_EXPIRED, S_ALGO_INVALID, S_ALGO_INCOMPATIBLE, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_MAX 3.5.15.2. Interface CICM::Coprocessor::Stream Interface CICM::Coprocessor::Stream interface Stream : CICM::Stream { CICM::Coprocessor::Stream is an abstraction inherited by all conduits in the CICM::Coprocessor namespace. 3.5.15.2.1. CICM::Coprocessor::Stream Inheritance CICM::Coprocessor::Stream inherits from: CICM::Stream. Lanz & Novikov Expires January 8, 2011 [Page 241] Internet-Draft CICM July 2010 3.5.15.2.2. CICM::Coprocessor::Stream Methods Method CICM::Coprocessor::Stream::get_final_buffer() CICM::Status get_final_buffer( out CICM::Buffer buffer ); Returns the final block of transformed data, if available. The method blocks until data becomes available. Remarks: In certain cases, it may be necessary to retrieve the last transformed block of data, if, for example, a partial block remains after the last full block was retrieved. This call MUST be called after all data is supplied to the module and MUST precede any end_get_* calls. Parameters: [out] buffer Buffer of data read from stream. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_KEY_INVALID, S_KEY_EXPIRED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT 3.5.15.3. Interface CICM::Coprocessor::EncryptConduit Interface CICM::Coprocessor::EncryptConduit interface EncryptConduit : CICM::Conduit, CICM::SymKeyController, CICM::GenVectorController, CICM::ResyncController, CICM::Coprocessor::Stream { CICM::Coprocessor::EncryptConduit supports encryption operations within a single security domain. The resulting conduit is capable of managing the channel, accepting data for transformation, and receiving the result. It is created by calling CICM:: ChannelManager::create_coprocessor_encrypt_conduit. 3.5.15.3.1. CICM::Coprocessor::EncryptConduit Inheritance CICM::Coprocessor::EncryptConduit inherits from: CICM::Conduit, CICM::SymKeyController, CICM::GenVectorController, CICM:: Lanz & Novikov Expires January 8, 2011 [Page 242] Internet-Draft CICM July 2010 ResyncController and CICM::Coprocessor::Stream. 3.5.15.3.2. CICM::Coprocessor::EncryptConduit Methods Method CICM::Coprocessor::EncryptConduit::encrypt() CICM::Status encrypt( in CICM::Buffer plaintext, out CICM::Buffer ciphertext ); Send plaintext to the module to be encrypted, receiving the ciphertext resulting from the transformation as the result. Parameters: [in] plaintext Plaintext to encrypt. [out] ciphertext Ciphertext resulting from encryption operation. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN, S_CHANNEL_BUFFER_LEN 3.5.15.4. Interface CICM::Coprocessor::EncryptWithMACConduit Interface CICM::Coprocessor::EncryptWithMACConduit interface EncryptWithMACConduit : CICM::AbstractMACConduit, CICM::Coprocessor::EncryptConduit { CICM::Coprocessor::EncryptWithMACConduit supports encryption with MAC operations within a single security domain. The resulting conduit is capable of managing the channel, accepting data for transformation, and receiving the result (both ciphertext and a MAC value). It is created by calling CICM::ChannelManager:: create_coprocessor_encrypt_with_mac_conduit. 3.5.15.4.1. CICM::Coprocessor::EncryptWithMACConduit Inheritance CICM::Coprocessor::EncryptWithMACConduit inherits from: CICM:: AbstractMACConduit and CICM::Coprocessor::EncryptConduit. Lanz & Novikov Expires January 8, 2011 [Page 243] Internet-Draft CICM July 2010 3.5.15.5. Interface CICM::Coprocessor::EncryptWithSignConduit Interface CICM::Coprocessor::EncryptWithSignConduit interface EncryptWithSignConduit : CICM::AbstractSignConduit, CICM::Coprocessor::EncryptConduit { CICM::Coprocessor::EncryptWithSignConduit supports encryption with signature operations within a single security domain. The resulting conduit is capable of managing the channel, accepting data for transformation, and receiving the result (both ciphertext and a signature). It is created by calling CICM::ChannelManager:: create_coprocessor_encrypt_with_sign_conduit. 3.5.15.5.1. CICM::Coprocessor::EncryptWithSignConduit Inheritance CICM::Coprocessor::EncryptWithSignConduit inherits from: CICM:: AbstractSignConduit and CICM::Coprocessor::EncryptConduit. 3.5.15.6. Interface CICM::Coprocessor::DecryptConduit Interface CICM::Coprocessor::DecryptConduit interface DecryptConduit : CICM::Conduit, CICM::SymKeyController, CICM::SetVectorController, CICM::ResyncController, CICM::Coprocessor::Stream { CICM::Coprocessor::DecryptConduit supports decryption operations within a single security domain. The resulting conduit is capable of managing the channel, accepting data for transformation, and receiving the result. It is created by calling CICM:: ChannelManager::create_coprocessor_decrypt_conduit. 3.5.15.6.1. CICM::Coprocessor::DecryptConduit Inheritance CICM::Coprocessor::DecryptConduit inherits from: CICM::Conduit, CICM::SymKeyController, CICM::SetVectorController, CICM:: ResyncController and CICM::Coprocessor::Stream. Lanz & Novikov Expires January 8, 2011 [Page 244] Internet-Draft CICM July 2010 3.5.15.6.2. CICM::Coprocessor::DecryptConduit Methods Method CICM::Coprocessor::DecryptConduit::decrypt() CICM::Status decrypt( in CICM::Buffer ciphertext, out CICM::Buffer plaintext ); Send ciphertext to the module to be decrypted, receiving the plaintext resulting from the transformation as the result. Parameters: [in] ciphertext Ciphertext to decrypt. [out] plaintext Plaintext resulting from decryption operation. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_ERROR, S_CHANNEL_IO_ERROR, S_CHANNEL_DATA_INVALID, S_CHANNEL_DATA_INVALID_LEN, S_CHANNEL_BUFFER_LEN 3.5.15.7. Interface CICM::Coprocessor::DecryptWithMACConduit Interface CICM::Coprocessor::DecryptWithMACConduit interface DecryptWithMACConduit : CICM::AbstractMACVerifyConduit, CICM::Coprocessor::DecryptConduit { CICM::Coprocessor::DecryptWithMACConduit supports encryption with MAC verification operations within a single security domain. The resulting conduit is capable of managing the channel, accepting data for transformation, and receiving the result (both plaintext and an indication as to whether verification succeeded or failed). It is created by calling CICM::ChannelManager:: create_coprocessor_decrypt_with_mac_conduit. 3.5.15.7.1. CICM::Coprocessor::DecryptWithMACConduit Inheritance CICM::Coprocessor::DecryptWithMACConduit inherits from: CICM:: AbstractMACVerifyConduit and CICM::Coprocessor::DecryptConduit. Lanz & Novikov Expires January 8, 2011 [Page 245] Internet-Draft CICM July 2010 3.5.15.8. Interface CICM::Coprocessor::DecryptWithVerifyConduit Interface CICM::Coprocessor::DecryptWithVerifyConduit interface DecryptWithVerifyConduit : CICM::AbstractSigVerifyConduit, CICM::Coprocessor::DecryptConduit { CICM::Coprocessor::DecryptWithVerifyConduit supports encryption with signature verification operations within a single security domain. The resulting conduit is capable of managing the channel, accepting data for transformation, and receiving the result (both plaintext and an indication as to whether verification succeeded or failed). It is created by calling CICM::ChannelManager:: create_coprocessor_decrypt_with_verify_conduit. 3.5.15.8.1. CICM::Coprocessor::DecryptWithVerifyConduit Inheritance CICM::Coprocessor::DecryptWithVerifyConduit inherits from: CICM:: AbstractSigVerifyConduit and CICM::Coprocessor::DecryptConduit. 3.5.16. Channel Event Management 3.5.16.1. Interface CICM::ChannelEventManager Interface CICM::ChannelEventManager interface ChannelEventManager { CICM::ChannelEventManager supports registering and unregistering user-defined channel event listeners (CICM::ChannelEventListener) for specific channel events. It is accessed from any channel via its CICM::Channel::event_manager attribute. Remarks: In certain cases it may be necessary for a channel to asynchronously notify a client program of an event. Client programs can register to receive channel notifications using CICM::ChannelEventManager. This manager enables a client program to register a listener (callback) method designed to handle a specific condition. The event method prototype provided by the client program is defined in CICM::ChannelEventListener. CICM:: ChannelEventListener also defines the conditions that may result in a notification, including: channel failure or channel destruction. {FIGURE REMOVED} Figure 42. Interface Relationship Diagram for ChannelEventManager Lanz & Novikov Expires January 8, 2011 [Page 246] Internet-Draft CICM July 2010 3.5.16.1.1. CICM::ChannelEventManager Methods Method CICM::ChannelEventManager::register() CICM::Status register( in CICM::ChannelEventListener::ChannelEvent event, in CICM::ChannelEventListener listener ); Registers the listener for a specific channel event. Remarks: The provided listener applies only to the client program from which the registration is initiated. Parameters: [in] event Event for which this listener is being registered. [in] listener Listener that will receive a notification about the specified event. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_EVENT_REGISTERED, S_EVENT_NOT_SUPPORTED Method CICM::ChannelEventManager::unregister() CICM::Status unregister( in CICM::ChannelEventListener::ChannelEvent event ); Unregisters the listener associated with the specified event. Remarks: The listener associated with the specified event is only unregistered from the client program from which this method is called. Parameters: [in] event Event that will no longer have a listener associated with it. Returns: Lanz & Novikov Expires January 8, 2011 [Page 247] Internet-Draft CICM July 2010 S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_EVENT_NOT_REGISTERED 3.5.16.2. Interface CICM::ChannelEventListener Interface CICM::ChannelEventListener interface ChannelEventListener { CICM::ChannelEventListener is unlike other CICM interfaces in that the interface is implemented by the developer of the client program to service a specific channel event and is then registered via the CICM::ChannelEventManager. 3.5.16.2.1. CICM::ChannelEventListener Types and Constants Type CICM::ChannelEventListener::ChannelEvent typedef CICM::UInt32 ChannelEvent; Events for which a ChannelEventListener can be notified. Constant CICM::ChannelEventListener::C_CHANNEL_DATA_AVAILABLE const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_DATA_AVAILABLE = 0x00004001; Data from remote peer is available. Constant CICM::ChannelEventListener::C_CHANNEL_ERROR const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_ERROR = 0x00004002; General error has occurred on the channel. Constant CICM::ChannelEventListener::C_CHANNEL_INSUFFICIENT_ENTROPY const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_INSUFFICIENT_ENTROPY = 0x00004004; Insufficient entropy available on the channel. Constant CICM::ChannelEventListener::C_CHANNEL_LOST_SYNC const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_LOST_SYNC = 0x00004007; Cryptographic synchronization with remote peer has been lost; this may not be detectable by the cryptographic module. Constant CICM::ChannelEventListener::C_CHANNEL_PEER_RESET const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_PEER_RESET = 0x00004008; Remote peer is no longer available; this may not be detectable by the cryptographic module. Lanz & Novikov Expires January 8, 2011 [Page 248] Internet-Draft CICM July 2010 3.5.16.2.2. CICM::ChannelEventListener Methods Method CICM::ChannelEventListener::event_occurred() void event_occurred( in CICM::ChannelEventListener::ChannelEvent event, in CICM::Buffer event_data ); Method implemented by client program that receives a message about a channel event that occurred. An opaque data field with additional information about the event in a module-specific format may optionally be provided with the event itself. Remarks: The format of the event data value is not defined by CICM. The Implementation Conformance Statement (see Section 4, Conformance and Extensions) must reference a standard format or define a module-specific format for this datatype. Note: Because this method is called by the runtime system and not a client program, it does not return a status value. Parameters: [in] event Event that occurred. [in] event_data Opaque data associated with the event. 3.5.17. Channel Groups 3.5.17.1. Interface CICM::ControllerGroup Interface CICM::ControllerGroup interface ControllerGroup { Group of controllers and/or conduits. Remarks: All of the controllers in a controller group share certain characteristics, such as a state vector. Whenever a shared characteristic is changed on a member of the group, the change is applied to all members of the group. Thus, if a client program has grouped controllers/conduits to follow advancing TOD rules, for example, when one controller/conduit performs an operation at time X as expressed in the TOD value, all other grouped controllers/conduits are prohibited from using a TOD value earlier Lanz & Novikov Expires January 8, 2011 [Page 249] Internet-Draft CICM July 2010 than time X. 3.5.17.1.1. CICM::ControllerGroup Methods Method CICM::ControllerGroup::add() CICM::Status add( in CICM::Controller controller_ref ); Add a controller or conduit to this controller group. Parameters: [in] controller_ref Controller to add to the group. Returns: S_OK, S_GENERAL_ERROR, S_NON_FUNCTIONAL, S_OPERATION_FAILED, S_POLICY_VIOLATION, S_MODULE_RESOURCES, S_HOST_RESOURCES, S_INVALID_STATE, S_ALARM_STATE, S_MODULE_NOT_AVAILABLE, S_TIMEOUT, S_NOT_AUTHENTICATED, S_NOT_AUTHORIZED, S_TOKEN_NOT_PRESENT, S_TOKEN_ADMIN_NOT_PRESENT, S_CHANNEL_IN_GROUP, S_CHANNEL_CLASSIFICATION 4. Conformance and Extensions 4.1. Conformance Many modules will not require the implementation of the full specification to support a module's capabilities. Thus, the CICM conformance model was developed to be flexible. This model does not normatively prescribe the implementation of specific functional subsets of the specification. Instead, CICM outlines a normative Implementation Conformance Statement (ICS) and associated documentation that SHALL be supplied with any conformant implementation. The ICS guides the developer of a library for a specific module to record the implementation state and presence of extensions for each section of the specification. The gradations of the implementation state are relatively coarse: "implemented," "partially implemented," or "not implemented." Extensions are identified as interface extensions or status code extensions, and are recorded as "existing" or "not-existing." An analysis of the resulting matrix enables a software developer using the API or an architect designing a system integrating with a specific cryptographic module to quickly determine if a developer's library will meet user requirements. Those specification sections marked "partially implemented" or for which Lanz & Novikov Expires January 8, 2011 [Page 250] Internet-Draft CICM July 2010 extensions are indicated may require additional analysis to determine what elements have been extended or are not implemented, and the resulting repercussions on the system utilizing the library. CICM interfaces are organized into three major sections: module management, channel management, and key management. Each section is partitioned differently into logical subsections in the ICS. The module management section is partitioned into subsections by individual module managers. The channel management section is partitioned into subsections by channel type. And the key management section is partitioned into subsections by the type of key and class of operation performed on the key. An Implementation Data Specification (IDS) based on the ICS also is required. For each implemented interface containing an opaque data parameter (module-specific or infrastructure-specific parameter not described in detail in the specification), the IDS requires a detailed specification of the data structure for each parameter. An implementation conforms to the specification if it meets the following conditions: o A CICM library implementation SHALL include only the subset of interfaces corresponding to the functionality supported by the module for which it was designed. The implementation SHOULD implement the full subset of interfaces implemented by the module. A library SHALL implement a non-zero set of interfaces corresponding to functionality implemented by the module that reasonably maps back to the CICM interface and is appropriate for the system in use. o A CICM library SHALL minimally implement the CICMRoot and CryptoModule interfaces, both fundamental parts of the specification without which no other interfaces can be implemented. The CryptoModule interfaces SHALL implement minimally one manager, which must be at least "partially" implemented (e.g., simply implementing non-functional inherited or dependent interfaces is non-conformant). o A CICM library SHALL be made available with a corresponding ICS. o A CICM library SHALL be made available with an IDS corresponding to its ICS. The format of any module-specific data structures defined as opaque data elements in the specification with which a client program using CICM must have knowledge SHALL be documented by the module developer and SHALL be made available as the IDS. If the implementation implements no interfaces with opaque data parameters and includes no extensions, the IDS SHALL state that Lanz & Novikov Expires January 8, 2011 [Page 251] Internet-Draft CICM July 2010 the implementation requires no IDS entries. o A CICM interface is only conformant if it also implements any inherited and all dependent interfaces (e.g., an Encrypt:: WithSignConduit requires that symmetric keys and asymmetric keysets also be implemented). The exception is the CICM:: ChannelManager, which only requires the implementation of one or more of its inherited interfaces. o Any interfaces that are not implemented precisely as specified in the normative portion of the specification SHALL be identified as extensions to the specification. o Extensions to the CICM specification SHALL NOT contradict nor cause the non-conformance of functionality defined in the normative specification, SHALL follow the requirements and guidelines of the normative specification, and SHALL be clearly described in supporting documentation. o Memory responsibilities and calling conventions SHALL follow the appropriate IDL language mapping conventions. 4.1.1. Implementation Conformance Statement Contents A library implementation conforming to the CICM specification SHALL be accompanied by an ICS. The ICS is generated by the module developer or implementer of a CICM-conformant library for a specific cryptographic module configuration (including any associated hardware/firmware/software) and SHALL contain the following information: o Details regarding the product and version of the specification to which it conforms, including: * CICM version number * Product manufacturer/name, version number (hardware, firmware, and software) * Configuration details, including patch state * Date of claim o Capability Support Matrix, listing the major sections of the specification and their implementation state ("I"=implemented, "P"=partially implemented, and "N"=not implemented), and the presence of any extensions Lanz & Novikov Expires January 8, 2011 [Page 252] Internet-Draft CICM July 2010 o List of developer-defined extensions to specification. Extensions SHALL be divided into four classes: Interface extensions, status code extensions, event listener extensions, and constant extensions. Extensions SHALL be documented as specified in the IDS. o List of unique identifiers for all supported cryptographic algorithms, organized by class of algorithm, and all supported key agreement protocols; each algorithm/protocol unique identifier SHALL be in CICM-specified format (refer to the section "Generating Unique Identifiers"). A sample CICM ICS is presented on the following pages. [SAMPLE ICS REMOVED] 4.1.2. Implementation Data Specification Contents The IDS serves as the detailed supporting documentation for the ICS. Conformance with the CICM specification requires that: o Each implemented interface that accepts an opaque data object SHALL reference an existing standard or document the data structure associated with that object in sufficient detail to allow an implementer to create new objects and manipulate existing objects. The exception to this requirement is those cases where a client program will NOT be allowed to manipulate the opaque data object (e.g., CICM::KeyProtocolReceiver::get_from_module or CICM:: PackageImporter::import_segment). o Each interface extension listed in the ICS SHALL be clearly described in the IDS and SHALL be documented in a manner similar to the normative CICM documentation. o Each status code extension listed in the ICS SHALL be referenced in the IDS with a corresponding description, numeric code, and a list of CICM interfaces to which the extension applies. o Each module or channel event listener extension listed in the ICS SHALL be referenced in the IDS with corresponding description, numeric code, and data structure definition associated with the event_data parameter, if applicable. o Each extended constant value listed in the ICS shall be referenced in the IDS with corresponding description and numeric code. Examples of interfaces requiring an IDS entry to be conformant include: Lanz & Novikov Expires January 8, 2011 [Page 253] Internet-Draft CICM July 2010 o CICM::SymKeyManager::get_key_by_id, where the key identifier is specific to the key management system in use. o CICM::LogManager::retrieve, where the log returned from the method call will vary from module-to-module. o CICM::ModuleEventListener::event_occurred, where the event_data parameter passed to a client program as part of an event notification is system specific. Note that the event listener callbacks (CICM::ModuleEventListener:: event_occurred and CICM::ChannelEventListener::event_occurred) require that the event_data parameter be described for each event type implemented. 4.1.3. Generating Unique Identifiers CICM does not provide a list of algorithms with their corresponding normative unique identifiers. Instead, normative guidance is provided for generating the identifiers for the different classes of algorithms defined in the specification and for key agreement protocols. These identifiers are used by software developers when specifying algorithms or protocols as parameters to CICM methods. This identifier generation guidance is intended to promote interoperability, and encourage the use of the same identifier for algorithms among vendors. Three major components may be combined to form a unique algorithm identifier: an algorithm (ALGO), that may be precisely specified as an encryption algorithm (ENCRALGO), signature algorithm (SIGALGO), MAC algorithm (MACALGO), or hash algorithm (HASHALGO); a mode (MODE); and an encoding scheme (SCHEME), that may be precisely specified as an encryption scheme (ENCRSCHEME) or a signature scheme (SIGSCHEME). Note that some components above may not apply to certain algorithms. In addition, applicable modes and components need not always be specified. For encryption and signature algorithms, if a length is required, the length SHALL be appended to the algorithm without a dash ("-") delimiter. Otherwise, components are concatenated with a dash ("-"). Alternatively, an identifier can consist of a simple personality designation (PERSONALITY). The personality consists of a combination of parameters that comprise a logically complete crypto, and specifies a specific equipment type or configuration for which algorithm, mode, and any other parameters are implicit. The designation may contain dashes. Certain algorithms may be appropriate for and thus listed under more Lanz & Novikov Expires January 8, 2011 [Page 254] Internet-Draft CICM July 2010 than one algorithm class. Below are the classes of algorithms and format of the identifiers for each class: Asymmetric encryption algorithm identifiers (AsymEncrAlgorithmId) Format: ENCRALGO [ "-" ENCRSCHEME ] | PERSONALITY Examples: "RSA1024-OAEP" Asymmetric signature algorithm identifiers (AsymSigAlgorithmId) Format: SIGALGO [ "-" HASHALGO [ "-" SIGSCHEME ]] | PERSONALITY Examples: "DSA-SHA1" or "RSA1024-SHA256-PKCS1V1_5" Symmetric encryption algorithm identifiers (SymEncrAlgorithmId) Format: ENCRALGO | PERSONALITY Examples: "AES128" or "3DES" Symmetric MAC algorithm identifiers (SymMacAlgorithmId) Format: MACALGO [ - HASHALGO ] | PERSONALITY Examples: "HMAC-SHA1" or "UMAC" Hash algorithm identifiers (HashAlgorithmId) Format: HASHALGO | PERSONALITY Examples: "MD5" or "SHA1" Key wrap algorithm identifiers (KeyWrapAlgorithmId) Format: ENCRALGO | PERSONALITY Examples: AESKW Two major components may be combined to form a key agreement protocol identifier: the key agreement protocol including its version number (KEYAGREEPROTO) and the protocol's associated algorithm suite including its version number (ALGOSUITE). The following is the format for key agreement protocol identifiers. Key agreement protocol identifier (ProtocolId) Lanz & Novikov Expires January 8, 2011 [Page 255] Internet-Draft CICM July 2010 Format: KEYAGREEPROTO "-" ALGOSUITE Examples: "IKE2.0-FIREFLY" Note that the resulting identifiers may not be compatible with those identifiers defined for other module developers' implementations. A client program utilizing an identifier corresponding to one algorithm for a specific module may be required to modify the identifier for the same algorithm for a different type of module. Discrepancies may be discovered through a brief review of the ICS "Supported Algorithms" section. 4.1.4. Conformance Verification In the future, test assertions may be made available to allow results from different organizations to be compared, and to provide proof of conformance to the specification. 4.2. Extensions An extension is a mechanism to define functionality beyond what is defined in the official specification. In the interest of promoting interoperability, extensions to the specification are discouraged except where necessary. Extensions to the specification enable module developers to add functionality unanticipated by the specification developers and to support proprietary features. 4.2.1. Extending an Interface Developers may augment CICM interfaces by extending CICM IDL by adding new methods/attributes to existing interfaces or by deriving off existing CICM interfaces. Extensions SHALL be documented in the ICS. 4.2.2. Extending Codes CICM codes are constants that share a single 32-bit space. A number of datatypes for different purposes correspond to ranges in this space. The "CICM" codes are normatively defined in the specification; the "extended" codes are module developer-defined extensions. The codes, with their corresponding ranges and uses, are as follows: CICM status codes 0x00000000 - 0x00001000 Extended status codes Lanz & Novikov Expires January 8, 2011 [Page 256] Internet-Draft CICM July 2010 0x00001001 - 0x00002000 CICM module event codes 0x00002001 - 0x00003000 Extended module event codes 0x00003001 - 0x00004000 CICM channel event codes 0x00004001 - 0x00005000 Extended channel event codes 0x00005001 - 0x00006000 CICM generic constants 0x00006001 - 0x00007000 Extended generic constants 0x00007001 - 0x00008000 RESERVED 0x00008001 - 0x7FFFFFFF Normatively-defined CICM codes SHOULD be used whenever possible. If any of the extended codes above are defined, they SHALL be documented as specified below. 4.2.2.1. Extending Status Codes The return value from CICM methods informs the caller of the status of the call. CICM does not utilize the IDL exception mechanism to report errors. The specification normatively defines a set of error codes in the range of 0x00000000 - 0x00001000, which may not be modified or extended. A block of codes in the range of 0x00001001 - 0x00002000 are reserved for module developer-defined status codes. Any codes defined in this range SHALL be documented in the ICS. Lanz & Novikov Expires January 8, 2011 [Page 257] Internet-Draft CICM July 2010 4.2.2.2. Extending Module/Channel Event Codes The specification supports registering and unregistering user-defined channel event listeners for specific module and channel events. Module events in the range of 0x00003001 - 0x00004000 and channel events in the range of 0x00004001 - 0x00005000 are normatively defined and may not be modified or extended. A block of module events in the range 0x00003001 - 0x00004000 and channel events in the range of 0x00005001 - 0x00006000 are reserved for module developer- defined events. Any codes defined in this range SHALL be documented in the ICS. 4.2.2.3. Extending Constants A number of constants are normatively defined for specification use in the range of 0x00006001 - 0x00007000. Module developer-defined constants may be specified in the range of 0x00007001 - 0x00008000. Any constants defined in this range SHALL be documented in the ICS. 5. IANA Considerations This memo makes no request to IANA. Note to RFC Editor: this section may be removed on publication as an RFC. 6. Security Considerations While security issues are not addressed in this document, implementations SHOULD consider issues discussed in RFC 3552 [RFC3552]. 7. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3552] Rescorla, E. and B. Korver, "Guidelines for Writing RFC Text on Security Considerations", BCP 72, RFC 3552, July 2003. Appendix A. Status Codes Each method defined in CICM returns a status value to inform the Lanz & Novikov Expires January 8, 2011 [Page 258] Internet-Draft CICM July 2010 caller as to the outcome of the call. The documentation for each individual method lists the status codes that may be returned in the event a call to the method results in failure. The status value CICM::S_OK is returned if a method completes successfully. The output parameters of any methods that return a status other than CICM::S_OK are invalid and SHALL NOT be referenced or used. CICM methods can fail for a variety of reasons, including: o Invalid, illegal, out-of-range, or poorly formed parameters o Resources insufficient or unavailable o Unsupported capabilities o Policy violation o Hardware failure. For additional information concerning extending status codes, see Section 4, Conformance and Extensions. CICM status codes are defined below. S_OK = 0x00000000 No error. S_GENERAL_ERROR = 0x00000003 Unrecoverable error occurred, potentially leaving module in an inconsistent state. S_NON_FUNCTIONAL = 0x00000005 Tamper event or other condition has rendered module non- functional. S_OPERATION_FAILED = 0x00000006 Method encountered a general failure, but detailed information about the failure is not available. S_POLICY_VIOLATION = 0x00000009 Lanz & Novikov Expires January 8, 2011 [Page 259] Internet-Draft CICM July 2010 Module policy does not permit the requested action. S_MODULE_RESOURCES = 0x0000000A Module resources necessary to perform the requested operation are not available. S_HOST_RESOURCES = 0x0000000C Host resources necessary to perform the requested operation are not available. S_INVALID_STATE = 0x0000000F Module is in a state that does not allow this operation to be performed. S_ALARM_STATE = 0x00000011 Module has entered an alarm state. S_MODULE_NOT_AVAILABLE = 0x00000012 Module has been powered down, disconnected, or is otherwise unavailable.. S_TIMEOUT = 0x00000014 Time to receive response from call exceeded threshold. S_NOT_AUTHENTICATED = 0x00000017 User has not authenticated to module. S_NOT_AUTHORIZED = 0x00000018 User is not authorized to call method. S_MODULE_DOES_NOT_EXIST = 0x0000001B No module with the specified unique identifier exists. S_MODULE_IN_USE = 0x0000001D Module test initiated when channels or other module resources are in use. S_NOT_AVAILABLE = 0x0000001E Lanz & Novikov Expires January 8, 2011 [Page 260] Internet-Draft CICM July 2010 Information is not available or cannot be found. S_INVALID_VECTOR = 0x00000021 Invalid vector provided; this may be because the length or format of the vector is inappropriate for the algorithm or system with which the vector is being used. S_INVALID_DATA_BUFFER = 0x00000022 Data in user-specified buffer parameter is invalid. S_KEY_USED_INVALID = 0x00000024 Key specified as parameter to method is invalid; this could denote that the key has been zeroized, a failed parity check, or other conditions that prevent the use of the key. S_KEY_USED_EXPIRED = 0x00000027 Key specified as parameter to method has expired and may not be used. S_KEY_USED_CLASSIFICATION = 0x00000028 Key specified as parameter to method at wrong classification level. S_KEY_USED_WRAPPED = 0x0000002B Key specified as parameter to method may not be used in the context until it has been unwrapped. S_KEY_USED_CONTEXT = 0x0000002D Attempt to use key in an illegal context as defined by the module; e.g., a key is specified for use on a channel but, due to module architecture, the key is unavailable to that channel. S_KEY_USED_COMPONENT_NOT_AVAIL = 0x0000002E Asymmetric key specified as parameter to method contains only a public key (possibly in a certificate) or only a private key, when the other component is needed by the called method. S_KEY_INVALID = 0x00000030 Lanz & Novikov Expires January 8, 2011 [Page 261] Internet-Draft CICM July 2010 Key is invalid; this could denote that the key has been zeroized, a failed parity check, or other conditions that prevent the use of the key. S_KEY_EXPIRED = 0x00000033 Key has expired and may not be used. S_KEY_INCOMPATIBLE = 0x00000035 Key type (e.g., TEK, KEK) incompatible with intended usage. S_KEY_CLASSIFICATION = 0x00000036 Key at wrong classification level. S_KEY_WRAPPED = 0x00000039 Key may not be used in this context until it has been unwrapped. S_KEY_NOT_WRAPPED = 0x0000003A Key is not wrapped. S_KEY_NOT_WRAPPABLE = 0x0000003C Module is not able to wrap key. S_KEY_NOT_EXPORTABLE = 0x0000003F Key is not exportable, potentially because it has not been wrapped or other policy disallows it. S_KEY_WRAPPED_EXISTS = 0x00000041 Wrapped key already exists. S_KEY_UNWRAPPED_EXISTS = 0x00000042 Unwrapped key already exists. S_KEY_UPDATE_MAX = 0x00000044 Maximum number of updates for this key has been exceeded. S_KEY_INVALID_ID = 0x00000047 Lanz & Novikov Expires January 8, 2011 [Page 262] Internet-Draft CICM July 2010 Invalid key identifier specified. S_KEY_PHYSICAL_LOC = 0x00000048 Invalid key physical location specified. S_KEY_ILLEGAL_CONVERSION = 0x0000004B Target algorithm is incompatible with algorithm associated with specified key. S_KEY_MALFORMED = 0x0000004D Key material supplied is malformed. S_KEY_METADATA_MALFORMED = 0x0000004E Key metadata supplied is malformed. S_KEY_NO_NEXT = 0x00000050 No next key available for rollover. S_KEY_WRONG_TYPE = 0x00000053 Illegal attempt to process a symmetric key with an asymmetric method or an asymmetric key with a symmetric method. S_KEY_FILL_DEVICE_NOT_CONNECTED = 0x00000055 Key fill device not connected. S_KEY_FILL_NOT_INITIATED = 0x00000056 Manual key fill device interaction not initiated within system- defined time limit. S_KEY_TRUST_ANCHOR = 0x00000059 Trust anchor required but is unavailable. S_LOCAL_PORT_INVALID = 0x0000005A Local port specified is invalid. S_LOCAL_PORT_INCOMPATIBLE = 0x0000005C Lanz & Novikov Expires January 8, 2011 [Page 263] Internet-Draft CICM July 2010 Local port specified cannot be used in intended manner. S_LOCAL_PORT_IN_USE = 0x0000005F Local port specified is currently in use. S_REMOTE_PORT_INVALID = 0x00000060 Remote port specified is invalid. S_REMOTE_PORT_IN_USE = 0x00000063 Remote port specified is currently in use. S_ALGO_INVALID = 0x00000065 Malformed string or unsupported/invalid algorithm specified. S_ALGO_INCOMPATIBLE = 0x00000066 Algorithm incompatible with intended usage (e.g., encryption, signature, hashing). S_TOKEN_NOT_PRESENT = 0x00000069 Token must be inserted to perform the requested operation and no token is available to the module. S_TOKEN_ADMIN_NOT_PRESENT = 0x0000006A Administrator token must be inserted to perform the requested operation and either no token is present or the inserted token is not an administrator token. S_TOKEN_ACCESS = 0x0000006C Token I/O error. S_TOKEN_RESOURCES = 0x0000006F Token resources necessary to perform the requested operation are not available. S_TOKEN_ASSOC_EXISTS = 0x00000071 Association between module and token already exists. S_TOKEN_ASSOC_AT_MODULE = 0x00000072 Lanz & Novikov Expires January 8, 2011 [Page 264] Internet-Draft CICM July 2010 Association failed because module will allow no new associations. S_TOKEN_ASSOC_AT_TOKEN = 0x00000074 Association failed because token will allow no new associations. S_TOKEN_ASSOC_NOT_EXIST = 0x00000077 Association between module and token does not exist at the module, at the token, or both. S_TOKEN_ASSOC_GENERAL = 0x00000078 Unspecified token association error occurred. S_TOKEN_DISASSOC_GENERAL = 0x0000007B Unspecified token disassociation error occurred. S_TOKEN_REC_NOT_FOUND = 0x0000007D Specified record not found. S_TOKEN_TIMEOUT = 0x0000007E Timeout for insertion of token has been exceeded. S_TOKEN_LAST_ASSOCIATED = 0x00000081 Cannot disassociate the last associated token from this module. S_PACKAGE_NOT_ACTIVATABLE = 0x00000082 Specified package is not executable. S_PACKAGE_ACTIVATED = 0x00000084 Specified package is currently running. S_PACKAGE_NOT_ACTIVE = 0x00000087 Specified package is not currently running. S_PACKAGE_INVALID = 0x00000088 Specified package is invalid. S_PACKAGE_TYPE_INVALID = 0x0000008B Lanz & Novikov Expires January 8, 2011 [Page 265] Internet-Draft CICM July 2010 Specified package type is invalid. S_PACKAGE_KEY_NOT_AVAILABLE = 0x0000008D Package is encrypted and the key specified for use to decrypt package is not available on the module. S_PACKAGE_KEY_NOT_SPECIFIED = 0x0000008E Package is encrypted but no key is specified to decrypt it. S_LOG_ENTRY_INVALID = 0x00000090 Log entry is invalid. S_EVENT_REGISTERED = 0x00000093 An event has already been registered by this process for this event type. S_EVENT_NOT_REGISTERED = 0x00000095 An event has not been registered by this process for this event type. S_EVENT_NOT_SUPPORTED = 0x00000096 Event is not supported in this implementation. S_TRUSTED_DISPLAY = 0x00000099 Peer information is available at trusted display. S_NEGOTIATION_ABORTED = 0x0000009A Negotiation was aborted. S_NEGOTIATION_FAILURE = 0x0000009C Negotiation failed. S_NEGOTIATION_IN_PROGRESS = 0x0000009F Negotiation is already in progress. S_NEGOTIATION_NOT_IN_PROGRESS = 0x000000A0 Lanz & Novikov Expires January 8, 2011 [Page 266] Internet-Draft CICM July 2010 No negotiation has been initiated. S_NEGOTIATION_TIMEOUT = 0x000000A3 Negotiation timed out. S_CERT_LOCAL_INVALID = 0x000000A5 Local certificate used in a key negotiation is invalid; the certificate may be corrupted or does not verify. S_CERT_LOCAL_EXPIRED = 0x000000A6 Local certificate used in a key negotiation has expired. S_CERT_REMOTE_INVALID = 0x000000A9 Remote certificate used in a key negotiation is invalid; the certificate may be corrupted or does not verify. S_CERT_REMOTE_EXPIRED = 0x000000AA Remote certificate used in a key negotiation has expired. S_CERT_REMOTE_PATH = 0x000000AC Certificates to enable verification of remote certificate's certification path are not available. S_PROTO_INVALID = 0x000000AF Malformed string or unsupported/invalid protocol specified. S_PROTO_INCOMPATIBLE = 0x000000B1 Protocol specified is incompatible with intended usage. S_PROTO_UNDETERMINED = 0x000000B2 An "implicit" protocol has been specified, but the protocol message does not indicate the protocol. S_CHANNEL_ERROR = 0x000000B4 Generic conduit/controller error encountered. S_CHANNEL_PEER_RESET = 0x000000B7 Lanz & Novikov Expires January 8, 2011 [Page 267] Internet-Draft CICM July 2010 Peer crypto reset conduit/controller or conduit/controller ceased operation. S_CHANNEL_MAX = 0x000000B8 Limit on total number of conduits/controllers has been reached. S_CHANNEL_NOT_FOUND = 0x000000BB Conduit/controller not found. S_CHANNEL_IO_ERROR = 0x000000BD Conduit/controller I/O error. S_CHANNEL_DATA_INVALID = 0x000000BE Input data to cryptographic operation is invalid (e.g., plaintext for encryption or ciphertext for decryption). S_CHANNEL_DATA_INVALID_LEN = 0x000000C0 Plaintext (for encryption) or ciphertext (for decryption) input data to cryptographic operation has an inappropriate length; this could denote that the data is too short, too long, or is not a multiple of some particular block size. S_CHANNEL_BUFFER_LEN = 0x000000C3 Output of function is too large for supplied buffer. S_CHANNEL_IN_GROUP = 0x000000C5 Conduit/controller already exists as part of group. S_CHANNEL_CLASSIFICATION = 0x000000C6 Conduits/controllers are not of the same classification. S_BYPASS_DATARATE_EXCEEDED = 0x000000C9 Bypass data rate exceeded. S_BYPASS_DATALIMIT_EXCEEDED = 0x000000CA Bypass data limit exceeded. S_INTEGRITY = 0x000000CC Lanz & Novikov Expires January 8, 2011 [Page 268] Internet-Draft CICM July 2010 In those cases where an encryption algorithm supplies both confidentiality and integrity (an integrity value is transmitted with the ciphertext), the final decrypt may fail with this integrity error if the integrity check fails. S_AUTHENTICATION_FAILED = 0x000000CF Authentication to the module failed; this could denote that a password is incorrect or that additional authentication data supplied is invalid. S_USER_AUTHENTICATED = 0x000000D1 Specified user has already authenticated to module. S_USERNAME_INVALID = 0x000000D2 Username is invalid. S_USER_EXISTS = 0x000000D4 User already exists. S_USER_INVALID = 0x000000D7 User does not exist. S_ROLE_INVALID = 0x000000D8 Role does not exist. S_ROLE_ASSOCIATED = 0x000000DB User already associated with this role. S_ROLE_NOT_ASSOCIATED = 0x000000DD User not associated with this role. S_ROLE_MAX = 0x000000DE Maximum number of roles already associated with this user. S_PASSWORD_INVALID = 0x000000E1 Specified password does not meet module policy. S_PASSWORD_INVALID_CHAR = 0x000000E2 Lanz & Novikov Expires January 8, 2011 [Page 269] Internet-Draft CICM July 2010 Specified password has invalid characters in it. S_PASSWORD_INVALID_LEN = 0x000000E4 Length of specified password is either too long or too short. S_SALT_INVALID = 0x000000E7 Invalid salt specified. S_ITERATION_COUNT_INVALID = 0x000000E8 Invalid iteration count specified. S_INSUFFICIENT_ENTROPY = 0x000000EB Insufficient entropy available. Appendix B. Terms alarm Output signal that denotes that the module has entered an alarm state. An alarm condition may prohibit a module from performing cryptographic operations. asymmetric key Pair of related keys, a public key known to everyone and a private key known only to the owning entity. See symmetric key and asymmetric keyset. asymmetric keyset May comprise one more of the following components: an asymmetric key pair, the public and private key components of a keypair, the digital certificate corresponding to the keyset public key, one or more verification certificates in the certificate chain of trust, and related public domain parameters. See also asymmetric key. asynchronous notification Delivery of an indication of a condition or event where, from the point of view of the recipient (the client program), the delivery occurs asynchronously via a callback. See also event and event notification. Lanz & Novikov Expires January 8, 2011 [Page 270] Internet-Draft CICM July 2010 attribute State associated with an instance of an interface. authentication Security measure designed to establish the validity of a transmission, message, or originator, or a means of verifying an individual's authorization to receive specific categories of information (CNSSI 4009). authorization Access privileges granted to a user, program, or process (CNSSI 4009). blocking A call to a method is blocking if the method does not return program control to the caller until either the operation has completed or an error is recognized. See also non-blocking. buffer Collection of binary data. bypass In cryptography, this is an operation whereby all of the data is passed from one security domain through the cryptographic module to the other security domain without having a cryptographic transformation applied to it. See also selective bypass. callback Procedure provided by the client program that is to be invoked when an appropriate condition or event is recognized. See also asynchronous notification. certificate Digitally signed document that binds a public key with an identity. The certificate contains, at a minimum, the identity of the issuing Certification Authority, the user identification information, and the user's public key (CNSSI 4009). certificate revocation list (CRL) Lanz & Novikov Expires January 8, 2011 [Page 271] Internet-Draft CICM July 2010 List of certificate serial numbers corresponding to certificates that have been revoked or are no longer valid. channel Abstraction under which one or more cryptographic transforms are performed and within which all details associated with the transform are encapsulated, including the path through the module. See also conduit, controller, and stream. channel type Cryptographic transform to be applied on a channel. client program Program linked to a CICM library running as a single process on a host computer system that accesses cryptographic services and/or to manages a cryptographic module. conduit Abstraction that encapsulates channel control and data flow. See also channel, controller, and stream. controller Abstraction used to configure and control a channel. See also channel, conduit, and stream. coprocessor mode Mode of operation in which cryptographic transformations are performed within a single security domain. For example, in coprocessor mode, a client program provides plaintext to a module, the plaintext is transformed, and the resulting ciphertext is returned to the same client program. cryptographic module Abstraction of hardware, firmware, or software components that makes cryptographic services available to client programs via one or more channels. cryptographic synchronization Process by which a receiving decrypting cryptographic logic attains the same internal state as the transmitting encrypting Lanz & Novikov Expires January 8, 2011 [Page 272] Internet-Draft CICM July 2010 logic. cryptographic transform The specific cryptographic process that is to be applied to a stream of data or is used to generate keystream or random data, often (but not always) based upon a cryptographic key. Transforms include encryption, decryption, signing, keystream generation, hashing, and random data generation. driver Conceptual component residing on a host that enables the exchange of commands and data between the client program and a module. Module-specific abstraction layer that serves as a translation mechanism between the individual functions defined in the CICM library and the commands specific to a given cryptographic module. This component also provides a conduit for data between a host and a module. ephemeral symmetric key Symmetric cryptographic key generated as part of a key negotiation process. Ephemeral keys may be destroyed when the channel or session utilizing the ephemeral key completes. Ephemeral keys are not visible if a client program lists the keys on a module. See also static key. event Situation occurring on a module or a channel for which a client program may be notified. event notification Call from the host runtime system to a client program announcing that a specific situation has occurred. See callback and asynchronous notification. grade Negotiated classification level of a channel. hardware access token Removable device used to provide locking and unlocking features for the cryptographic capabilities of a cryptographic module. Lanz & Novikov Expires January 8, 2011 [Page 273] Internet-Draft CICM July 2010 host Computer system upon which a client program linked to a CICM library executes. hybrid channel Channel that simultaneously supports two fundamental cryptographic services; for example, an encryption with signature channel transforms data, resulting in both ciphertext and a final signature value. iterator Software construct that enables a software program to walk through a list of related items. key See symmetric key and asymmetric key. key agreement protocol Protocol that allows two or more participants to negotiate an ephemeral symmetric key without disclosing the resulting key material to non-participants. The protocol is conducted in such a way that all participants influence the outcome. key encryption key Key that encrypts or decrypts another key for transmission or storage. key fill device Devices that read-in, transfer, and store key material. key fill interface Set of protocols, electrical connections, and physical characteristics that comprise the connecting link between a key fill device and a cryptographic module. CICM enables a key fill interface to be configured and actions to be initiated on a key fill device via the key fill interface. key infrastructure Lanz & Novikov Expires January 8, 2011 [Page 274] Internet-Draft CICM July 2010 Set of hardware, software, people, policies, and procedures needed to create, manage, store, distribute, and revoke key material. key rollover Process of moving from one key to another in a pre-defined sequence of keys; may also be referred to as "key supersession." key tag Identification information associated with certain types of electronic key (CNSSI 4009). key unwrap Process whereby an encrypted cryptographic key is decrypted using a cryptographic module and a different key. key update Deterministic one-way transformation of a symmetric key (and its current update count) to a new key. key wrap Process whereby a cryptographic key is encrypted by a cryptographic module using a separate key in a manner sufficient to protect the key at the level of its classification. keystream Sequence of symbols produced by a cryptographic module using a cryptographic key to combine with plain text to produce cipher text, control transmission security processes, or produce key (CNSSI 4009). listener Method registered by the client program that will be called upon the occurrence of a specific module event. local port Port on module in same security domain in which client program is located to which commands are presented and through which data is sent/received. See also remote port. manager Lanz & Novikov Expires January 8, 2011 [Page 275] Internet-Draft CICM July 2010 Specialized attributes that encapsulate different classes of module, key and channel management functionality. message authentication code (MAC) Data associated with an authenticated message allowing a receiver to verify the integrity of the message (CNSSI 4009). method Single CICM library function that performs a specific task. namespace An abstract container that holds related interfaces. non-blocking A method is non-blocking if it initiates an operation and then returns control to the caller, usually before the outcome of the operation has been determined. See also blocking. opaque data object Binary object accepted by or returned from a method call whose structure is imposed by some entity unrelated to the CICM specification. package Software, FPGA image, policy database, configuration parameters, or other types of executable or interpretable code that may be imported into and removed from a module. persistent key See static key. policy Precise specification of the security rules under which a cryptographic module will operate. port Identifier that designates a logical interface through which data moves into and out of a cryptographic module. See also local port and remote port. Lanz & Novikov Expires January 8, 2011 [Page 276] Internet-Draft CICM July 2010 remote port Port in non-local security domain from which transformed data is received. See also local port. role A designation to which users are assigned that identifies a job type defined in terms of the privileges of that user. security domain System or group of systems operating under a common security policy. Communication between domains is controlled in a well- defined manner. selective bypass Portion of the traffic through a channel that is not to be cryptographically transformed. Also commonly referred to as "header bypass." static key Cryptographic key imported into or established on a module that will remain on the module until it is explicitly removed. See also ephemeral key. stream An abstraction representing an entity utilizing an existing controller to enable data to be sent to a module to be transformed and transformed data to be received using a controller as a foundation. symmetric key Usually a sequence of random or pseudorandom bits used initially to set up and periodically change the operations performed in crypto-equipment for the purpose of encrypting or decrypting electronic signals (CNSSI 4009). See asymmetric key. system Hardware and software components, including the cryptographic module, that meet a specific set of security-related requirements. tamper Lanz & Novikov Expires January 8, 2011 [Page 277] Internet-Draft CICM July 2010 Output signal from module that denotes it has detected a tamper event. token See hardware access token. trusted display Hardware component independent of a host to enter or display information to be directly sent to/received from a cryptographic module. zeroize Input signal instructing the module to clear its memory of any sensitive cryptographic material. CICM supports both a module zeroize (destroying all key material on module) and zeroizing an individual key. Appendix C. IDL Definitions module CICM { typedef unsigned long UInt32; typedef boolean Bool; typedef string CharString; typedef sequence Buffer; typedef CICM::UInt32 Status; typedef CICM::UInt32 LocalPort; typedef CICM::UInt32 RemotePort; typedef CICM::Buffer MACBuffer; typedef CICM::Buffer SigBuffer; typedef CICM::Buffer HashBuffer; typedef CICM::Buffer Vector; typedef CICM::CharString ModuleId; typedef CICM::CharString KeyId; typedef CICM::UInt32 TransId; typedef CICM::CharString ModuleRecord; typedef CICM::CharString TokenRecord; typedef CICM::CharString PackageId; typedef CICM::CharString AsymEncrAlgorithmId; typedef CICM::CharString AsymSigAlgorithmId; Lanz & Novikov Expires January 8, 2011 [Page 278] Internet-Draft CICM July 2010 typedef CICM::CharString SymEncrAlgorithmId; typedef CICM::CharString SymMacAlgorithmId; typedef CICM::CharString HashAlgorithmId; typedef CICM::CharString KeyWrapAlgorithmId; typedef CICM::CharString ProtocolId; typedef CICM::CharString UserId; typedef CICM::CharString RoleId; const CICM::LocalPort FILL_INTERFACE_PORT = 0xFFFFFFEE; const CICM::LocalPort IMPLICIT_LOCAL_PORT = 0xFFFFFFBB; const CICM::RemotePort IMPLICIT_REMOTE_PORT = 0xFFFFFF99; const CICM::AsymEncrAlgorithmId IMPLICIT_ASYM_ENCR_ALGO = "IMPLICIT"; const CICM::AsymSigAlgorithmId IMPLICIT_ASYM_SIG_ALGO = "IMPLICIT"; const CICM::SymEncrAlgorithmId IMPLICIT_SYM_ENCR_ALGO = "IMPLICIT"; const CICM::KeyWrapAlgorithmId IMPLICIT_KEY_WRAP_ALGO = "IMPLICIT"; const CICM::SymMacAlgorithmId IMPLICIT_SYM_MAC_ALGO = "IMPLICIT"; const CICM::ProtocolId IMPLICIT_PROTOCOL_ID = "IMPLICIT"; typedef CICM::UInt32 Classification; const CICM::Classification C_LEVEL_CONFIDENTIAL = 0x00006029; const CICM::Classification C_LEVEL_SECRET = 0x0000602A; const CICM::Classification C_LEVEL_TOP_SECRET = 0x0000602C; const CICM::Classification C_LEVEL_UNCLASSIFIED = 0x0000602F; const CICM::Status S_OK = 0x00000000; const CICM::Status S_GENERAL_ERROR = 0x00000003; const CICM::Status S_NON_FUNCTIONAL = 0x00000005; const CICM::Status S_OPERATION_FAILED = 0x00000006; const CICM::Status S_POLICY_VIOLATION = 0x00000009; const CICM::Status S_MODULE_RESOURCES = 0x0000000A; const CICM::Status S_HOST_RESOURCES = 0x0000000C; const CICM::Status S_INVALID_STATE = 0x0000000F; const CICM::Status S_ALARM_STATE = 0x00000011; const CICM::Status S_MODULE_NOT_AVAILABLE = 0x00000012; const CICM::Status S_TIMEOUT = 0x00000014; const CICM::Status S_NOT_AUTHENTICATED = 0x00000017; const CICM::Status S_NOT_AUTHORIZED = 0x00000018; const CICM::Status S_MODULE_DOES_NOT_EXIST = 0x0000001B; const CICM::Status S_MODULE_IN_USE = 0x0000001D; const CICM::Status S_NOT_AVAILABLE = 0x0000001E; const CICM::Status S_INVALID_VECTOR = 0x00000021; const CICM::Status S_INVALID_DATA_BUFFER = 0x00000022; const CICM::Status S_KEY_USED_INVALID = 0x00000024; const CICM::Status S_KEY_USED_EXPIRED = 0x00000027; const CICM::Status S_KEY_USED_CLASSIFICATION = 0x00000028; const CICM::Status S_KEY_USED_WRAPPED = 0x0000002B; const CICM::Status S_KEY_USED_CONTEXT = 0x0000002D; const CICM::Status S_KEY_USED_COMPONENT_NOT_AVAIL = 0x0000002E; Lanz & Novikov Expires January 8, 2011 [Page 279] Internet-Draft CICM July 2010 const CICM::Status S_KEY_INVALID = 0x00000030; const CICM::Status S_KEY_EXPIRED = 0x00000033; const CICM::Status S_KEY_INCOMPATIBLE = 0x00000035; const CICM::Status S_KEY_CLASSIFICATION = 0x00000036; const CICM::Status S_KEY_WRAPPED = 0x00000039; const CICM::Status S_KEY_NOT_WRAPPED = 0x0000003A; const CICM::Status S_KEY_NOT_WRAPPABLE = 0x0000003C; const CICM::Status S_KEY_NOT_EXPORTABLE = 0x0000003F; const CICM::Status S_KEY_WRAPPED_EXISTS = 0x00000041; const CICM::Status S_KEY_UNWRAPPED_EXISTS = 0x00000042; const CICM::Status S_KEY_UPDATE_MAX = 0x00000044; const CICM::Status S_KEY_INVALID_ID = 0x00000047; const CICM::Status S_KEY_PHYSICAL_LOC = 0x00000048; const CICM::Status S_KEY_ILLEGAL_CONVERSION = 0x0000004B; const CICM::Status S_KEY_MALFORMED = 0x0000004D; const CICM::Status S_KEY_METADATA_MALFORMED = 0x0000004E; const CICM::Status S_KEY_NO_NEXT = 0x00000050; const CICM::Status S_KEY_WRONG_TYPE = 0x00000053; const CICM::Status S_KEY_FILL_DEVICE_NOT_CONNECTED = 0x00000055; const CICM::Status S_KEY_FILL_NOT_INITIATED = 0x00000056; const CICM::Status S_KEY_TRUST_ANCHOR = 0x00000059; const CICM::Status S_LOCAL_PORT_INVALID = 0x0000005A; const CICM::Status S_LOCAL_PORT_INCOMPATIBLE = 0x0000005C; const CICM::Status S_LOCAL_PORT_IN_USE = 0x0000005F; const CICM::Status S_REMOTE_PORT_INVALID = 0x00000060; const CICM::Status S_REMOTE_PORT_IN_USE = 0x00000063; const CICM::Status S_ALGO_INVALID = 0x00000065; const CICM::Status S_ALGO_INCOMPATIBLE = 0x00000066; const CICM::Status S_TOKEN_NOT_PRESENT = 0x00000069; const CICM::Status S_TOKEN_ADMIN_NOT_PRESENT = 0x0000006A; const CICM::Status S_TOKEN_ACCESS = 0x0000006C; const CICM::Status S_TOKEN_RESOURCES = 0x0000006F; const CICM::Status S_TOKEN_ASSOC_EXISTS = 0x00000071; const CICM::Status S_TOKEN_ASSOC_AT_MODULE = 0x00000072; const CICM::Status S_TOKEN_ASSOC_AT_TOKEN = 0x00000074; const CICM::Status S_TOKEN_ASSOC_NOT_EXIST = 0x00000077; const CICM::Status S_TOKEN_ASSOC_GENERAL = 0x00000078; const CICM::Status S_TOKEN_DISASSOC_GENERAL = 0x0000007B; const CICM::Status S_TOKEN_REC_NOT_FOUND = 0x0000007D; const CICM::Status S_TOKEN_TIMEOUT = 0x0000007E; const CICM::Status S_TOKEN_LAST_ASSOCIATED = 0x00000081; const CICM::Status S_PACKAGE_NOT_ACTIVATABLE = 0x00000082; const CICM::Status S_PACKAGE_ACTIVATED = 0x00000084; const CICM::Status S_PACKAGE_NOT_ACTIVE = 0x00000087; const CICM::Status S_PACKAGE_INVALID = 0x00000088; const CICM::Status S_PACKAGE_TYPE_INVALID = 0x0000008B; const CICM::Status S_PACKAGE_KEY_NOT_AVAILABLE = 0x0000008D; const CICM::Status S_PACKAGE_KEY_NOT_SPECIFIED = 0x0000008E; Lanz & Novikov Expires January 8, 2011 [Page 280] Internet-Draft CICM July 2010 const CICM::Status S_LOG_ENTRY_INVALID = 0x00000090; const CICM::Status S_EVENT_REGISTERED = 0x00000093; const CICM::Status S_EVENT_NOT_REGISTERED = 0x00000095; const CICM::Status S_EVENT_NOT_SUPPORTED = 0x00000096; const CICM::Status S_TRUSTED_DISPLAY = 0x00000099; const CICM::Status S_NEGOTIATION_ABORTED = 0x0000009A; const CICM::Status S_NEGOTIATION_FAILURE = 0x0000009C; const CICM::Status S_NEGOTIATION_IN_PROGRESS = 0x0000009F; const CICM::Status S_NEGOTIATION_NOT_IN_PROGRESS = 0x000000A0; const CICM::Status S_NEGOTIATION_TIMEOUT = 0x000000A3; const CICM::Status S_CERT_LOCAL_INVALID = 0x000000A5; const CICM::Status S_CERT_LOCAL_EXPIRED = 0x000000A6; const CICM::Status S_CERT_REMOTE_INVALID = 0x000000A9; const CICM::Status S_CERT_REMOTE_EXPIRED = 0x000000AA; const CICM::Status S_CERT_REMOTE_PATH = 0x000000AC; const CICM::Status S_PROTO_INVALID = 0x000000AF; const CICM::Status S_PROTO_INCOMPATIBLE = 0x000000B1; const CICM::Status S_PROTO_UNDETERMINED = 0x000000B2; const CICM::Status S_CHANNEL_ERROR = 0x000000B4; const CICM::Status S_CHANNEL_PEER_RESET = 0x000000B7; const CICM::Status S_CHANNEL_MAX = 0x000000B8; const CICM::Status S_CHANNEL_NOT_FOUND = 0x000000BB; const CICM::Status S_CHANNEL_IO_ERROR = 0x000000BD; const CICM::Status S_CHANNEL_DATA_INVALID = 0x000000BE; const CICM::Status S_CHANNEL_DATA_INVALID_LEN = 0x000000C0; const CICM::Status S_CHANNEL_BUFFER_LEN = 0x000000C3; const CICM::Status S_CHANNEL_IN_GROUP = 0x000000C5; const CICM::Status S_CHANNEL_CLASSIFICATION = 0x000000C6; const CICM::Status S_BYPASS_DATARATE_EXCEEDED = 0x000000C9; const CICM::Status S_BYPASS_DATALIMIT_EXCEEDED = 0x000000CA; const CICM::Status S_INTEGRITY = 0x000000CC; const CICM::Status S_AUTHENTICATION_FAILED = 0x000000CF; const CICM::Status S_USER_AUTHENTICATED = 0x000000D1; const CICM::Status S_USERNAME_INVALID = 0x000000D2; const CICM::Status S_USER_EXISTS = 0x000000D4; const CICM::Status S_USER_INVALID = 0x000000D7; const CICM::Status S_ROLE_INVALID = 0x000000D8; const CICM::Status S_ROLE_ASSOCIATED = 0x000000DB; const CICM::Status S_ROLE_NOT_ASSOCIATED = 0x000000DD; const CICM::Status S_ROLE_MAX = 0x000000DE; const CICM::Status S_PASSWORD_INVALID = 0x000000E1; const CICM::Status S_PASSWORD_INVALID_CHAR = 0x000000E2; const CICM::Status S_PASSWORD_INVALID_LEN = 0x000000E4; const CICM::Status S_SALT_INVALID = 0x000000E7; const CICM::Status S_ITERATION_COUNT_INVALID = 0x000000E8; const CICM::Status S_INSUFFICIENT_ENTROPY = 0x000000EB; interface Key { Lanz & Novikov Expires January 8, 2011 [Page 281] Internet-Draft CICM July 2010 typedef CICM::UInt32 State; const CICM::Key::State C_KEY_INVALID = 0x00006010; const CICM::Key::State C_KEY_VALID_WRAPPED = 0x00006013; const CICM::Key::State C_KEY_VALID_UNWRAPPED = 0x00006015; typedef CICM::UInt32 UsageStatus; const CICM::Key::UsageStatus C_KEY_USAGE_ALLOWED = 0x00006016; const CICM::Key::UsageStatus C_KEY_USAGE_FORBIDDEN = 0x00006019; attribute CICM::CharString identifier; attribute CICM::UInt32 location; attribute CICM::CharString alias; attribute CICM::Classification classification; attribute CICM::CharString caveat; attribute CICM::CharString authority; readonly attribute CICM::Key::State state; CICM::Status wrap( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm ); CICM::Status unwrap( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm ); CICM::Status export( out CICM::Buffer key_material ); CICM::Status export_via_fill_interface( in CICM::LocalPort fill_port ); CICM::Status zeroize(); }; interface SymKey : CICM::Key { typedef CICM::UInt32 Usage; const CICM::SymKey::Usage C_USAGE_GENERATE_KEYSTREAM = 0x0000601A; const CICM::SymKey::Usage C_USAGE_KEY_PRODUCTION_KEY = 0x0000601C; const CICM::SymKey::Usage C_USAGE_MESSAGE_AUTHENTICATION_CODE = 0x0000601F; const CICM::SymKey::Usage C_USAGE_SYM_DATA_ENCIPHERMENT = 0x00006020; Lanz & Novikov Expires January 8, 2011 [Page 282] Internet-Draft CICM July 2010 const CICM::SymKey::Usage C_USAGE_SYM_KEY_ENCIPHERMENT = 0x00006023; readonly attribute CICM::UInt32 update_count; CICM::Status update(); CICM::Status update_with_algo( in CICM::SymEncrAlgorithmId algorithm ); CICM::Status wrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::SymKey wrapped_key ); CICM::Status unwrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::SymKey unwrapped_key ); CICM::Status validate_key_usage( in CICM::SymKey::Usage usage_type, out CICM::Key::UsageStatus valid ); }; interface AsymKey : CICM::Key { typedef CICM::UInt32 Usage; const CICM::AsymKey::Usage C_USAGE_ASYM_DATA_ENCIPHERMENT = 0x00006001; const CICM::AsymKey::Usage C_USAGE_ASYM_KEY_ENCIPHERMENT = 0x00006002; const CICM::AsymKey::Usage C_USAGE_CERT_SIGN = 0x00006004; const CICM::AsymKey::Usage C_USAGE_CRL_SIGN = 0x00006007; const CICM::AsymKey::Usage C_USAGE_DIGITAL_SIGNATURE = 0x00006008; const CICM::AsymKey::Usage C_USAGE_INFRA_KEY_AGREEMENT = 0x0000600B; const CICM::AsymKey::Usage C_USAGE_P2P_KEY_AGREEMENT = 0x0000600D; Lanz & Novikov Expires January 8, 2011 [Page 283] Internet-Draft CICM July 2010 const CICM::AsymKey::Usage C_USAGE_SEED = 0x0000600E; CICM::Status wrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::AsymKey wrapped_key ); CICM::Status unwrap_and_copy( in CICM::Key kek, in CICM::KeyWrapAlgorithmId algorithm, out CICM::AsymKey unwrapped_key ); CICM::Status validate_key_usage( in CICM::AsymKey::Usage usage_type, out CICM::Key::UsageStatus valid ); }; interface Package { typedef CICM::UInt32 PackageType; const CICM::Package::PackageType C_PACKAGE_ALGORITHM = 0x00006054; const CICM::Package::PackageType C_PACKAGE_CONFIG_PARAMS = 0x00006057; const CICM::Package::PackageType C_PACKAGE_FPGA_IMAGE = 0x00006058; const CICM::Package::PackageType C_PACKAGE_POLICY_DB = 0x0000605B; const CICM::Package::PackageType C_PACKAGE_SOFTWARE = 0x0000605D; readonly attribute CICM::PackageId id; CICM::Status activate(); CICM::Status deactivate(); CICM::Status delete(); }; interface PackageImporter { CICM::Status import_segment( in CICM::Buffer package_data ); CICM::Status complete( out CICM::Package package_ref ); Lanz & Novikov Expires January 8, 2011 [Page 284] Internet-Draft CICM July 2010 CICM::Status abort(); }; interface Login { CICM::Status logout(); }; interface LogEntry { readonly attribute CICM::UserId user_id; readonly attribute CICM::RoleId role_id; readonly attribute CICM::CharString message; readonly attribute CICM::CharString date_time; CICM::Status delete(); }; interface PeerInfo { readonly attribute CICM::CharString peer_name; readonly attribute CICM::Classification classification; readonly attribute CICM::CharString compartment; readonly attribute CICM::CharString message; }; interface Negotiator { CICM::Status get_remote_info( out CICM::PeerInfo peer_info ); CICM::Status abort_negotiation(); }; interface ModuleEventListener { typedef CICM::UInt32 ModuleEvent; const CICM::ModuleEventListener::ModuleEvent C_MODULE_ACCESS_TOKEN_INSERTED = 0x00002001; const CICM::ModuleEventListener::ModuleEvent C_MODULE_ACCESS_TOKEN_REMOVED = 0x00002002; const CICM::ModuleEventListener::ModuleEvent C_MODULE_ALARM = 0x00002004; const CICM::ModuleEventListener::ModuleEvent C_MODULE_FAILURE = 0x00002007; const CICM::ModuleEventListener::ModuleEvent C_MODULE_INSUFFICIENT_ENTROPY = 0x00002008; const CICM::ModuleEventListener::ModuleEvent Lanz & Novikov Expires January 8, 2011 [Page 285] Internet-Draft CICM July 2010 C_MODULE_KEY_EXPIRED_HARD = 0x0000200B; const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_EXPIRED_SOFT = 0x0000200D; const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_FILL_COMPLETE = 0x0000200E; const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_FILL_CONNECTED = 0x00002010; const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_FILL_INITIATED = 0x00002013; const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_MEMORY = 0x00002015; const CICM::ModuleEventListener::ModuleEvent C_MODULE_KEY_PROTO_MESSAGE = 0x00002016; const CICM::ModuleEventListener::ModuleEvent C_MODULE_LOG_FULL = 0x00002019; const CICM::ModuleEventListener::ModuleEvent C_MODULE_LOG_NEAR_FULL = 0x0000201A; const CICM::ModuleEventListener::ModuleEvent C_MODULE_LOGIN_FAILURE = 0x0000201C; const CICM::ModuleEventListener::ModuleEvent C_MODULE_NOT_READY_FOR_TRAFFIC = 0x0000201F; const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_MGMT_ENTER = 0x00002020; const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_MGMT_EXIT = 0x00002023; const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_OFF = 0x00002025; const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_OFF_FAILURE = 0x00002026; const CICM::ModuleEventListener::ModuleEvent C_MODULE_POWER_ON = 0x00002029; const CICM::ModuleEventListener::ModuleEvent Lanz & Novikov Expires January 8, 2011 [Page 286] Internet-Draft CICM July 2010 C_MODULE_READY_FOR_TRAFFIC = 0x0000202A; const CICM::ModuleEventListener::ModuleEvent C_MODULE_REKEY_REQUEST = 0x0000202C; const CICM::ModuleEventListener::ModuleEvent C_MODULE_TEST_FAILURE = 0x0000202F; const CICM::ModuleEventListener::ModuleEvent C_MODULE_ZEROIZED = 0x00002031; void event_occurred( in CICM::ModuleEventListener::ModuleEvent event, in CICM::Buffer event_data ); }; interface ModuleEventManager { CICM::Status register( in CICM::ModuleEventListener::ModuleEvent event, in CICM::ModuleEventListener listener ); CICM::Status unregister( in CICM::ModuleEventListener::ModuleEvent event ); }; interface ChannelEventListener { typedef CICM::UInt32 ChannelEvent; const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_DATA_AVAILABLE = 0x00004001; const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_ERROR = 0x00004002; const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_INSUFFICIENT_ENTROPY = 0x00004004; const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_LOST_SYNC = 0x00004007; const CICM::ChannelEventListener::ChannelEvent C_CHANNEL_PEER_RESET = 0x00004008; void event_occurred( in CICM::ChannelEventListener::ChannelEvent event, in CICM::Buffer event_data ); }; interface ChannelEventManager { Lanz & Novikov Expires January 8, 2011 [Page 287] Internet-Draft CICM July 2010 CICM::Status register( in CICM::ChannelEventListener::ChannelEvent event, in CICM::ChannelEventListener listener ); CICM::Status unregister( in CICM::ChannelEventListener::ChannelEvent event ); }; interface Channel { readonly attribute CICM::ChannelEventManager event_manager; }; interface Stream : CICM::Channel {}; interface WriteStream : CICM::Stream { typedef CICM::UInt32 WriteStatus; const CICM::WriteStream::WriteStatus C_WRITE_NOT_READY = 0x00006067; const CICM::WriteStream::WriteStatus C_WRITE_READY = 0x00006068; }; interface ReadStream : CICM::Stream { typedef CICM::UInt32 ReadStatus; const CICM::ReadStream::ReadStatus C_READ_NOT_READY = 0x0000605E; const CICM::ReadStream::ReadStatus C_READ_READY = 0x00006061; }; interface Controller : CICM::Channel { CICM::Status destroy(); }; interface MultiDomainController : CICM::Controller { readonly attribute CICM::LocalPort local_port; readonly attribute CICM::RemotePort remote_port; }; interface SymKeyController : CICM::Controller { readonly attribute CICM::SymKey key; CICM::Status update_key(); CICM::Status update_key_with_algo( in CICM::SymEncrAlgorithmId algorithm ); CICM::Status rollover_key(); CICM::Status rollover_key_with_key( in CICM::SymKey next_key ); }; Lanz & Novikov Expires January 8, 2011 [Page 288] Internet-Draft CICM July 2010 interface AsymKeyController : CICM::Controller { readonly attribute CICM::AsymKey key; }; interface NegotiatedController : CICM::MultiDomainController, CICM::AsymKeyController, CICM::Negotiator { readonly attribute CICM::Classification negotiated_grade; CICM::Status renegotiate(); CICM::Status initiate_grade_change( in CICM::Classification new_grade ); CICM::Status acknowledge_grade_change(); }; interface SetVectorController : CICM::Controller { readonly attribute CICM::Vector vec; CICM::Status set_vector( in CICM::Vector vec ); CICM::Status set_vector_no_check( in CICM::Vector vec ); CICM::Status reset_vector(); }; interface GenVectorController : CICM::SetVectorController { CICM::Status generate_vector(); CICM::Status generate_vector_existing_state(); }; interface ResyncController : CICM::Controller { CICM::Status resync(); CICM::Status resync_with_sync_vector( in CICM::Vector vec ); }; interface ControllerGroup { CICM::Status add( in CICM::Controller controller_ref ); }; interface Conduit : Lanz & Novikov Expires January 8, 2011 [Page 289] Internet-Draft CICM July 2010 CICM::Controller, CICM::Stream { }; interface AbstractMACConduit : CICM::Conduit { readonly attribute CICM::SymKey mac_key; readonly attribute CICM::SymMacAlgorithmId mac_algorithm; CICM::Status end_get_mac( out CICM::MACBuffer mac ); }; interface AbstractSignConduit : CICM::Conduit { readonly attribute CICM::AsymKey sign_key; readonly attribute CICM::AsymSigAlgorithmId sign_algorithm; CICM::Status end_get_signature( out CICM::SigBuffer signature ); }; interface AbstractVerifyConduit : CICM::Conduit { typedef CICM::UInt32 VerifyStatus; const CICM::AbstractVerifyConduit::VerifyStatus C_DATA_VERIFIED = 0x00006025; const CICM::AbstractVerifyConduit::VerifyStatus C_DATA_NOT_VERIFIED = 0x00006026; }; interface AbstractMACVerifyConduit : CICM::AbstractVerifyConduit { readonly attribute CICM::SymKey verify_key; readonly attribute CICM::SymMacAlgorithmId verify_algorithm; CICM::Status end_get_verified( in CICM::MACBuffer mac, out CICM::AbstractVerifyConduit::VerifyStatus status ); }; interface AbstractSigVerifyConduit : CICM::AbstractVerifyConduit { readonly attribute CICM::AsymKey verify_key; readonly attribute CICM::AsymSigAlgorithmId verify_algorithm; CICM::Status end_get_verified( in CICM::SigBuffer signature, out CICM::AbstractVerifyConduit::VerifyStatus status ); }; Lanz & Novikov Expires January 8, 2011 [Page 290] Internet-Draft CICM July 2010 module Encrypt { interface Stream : CICM::WriteStream { CICM::Status encrypt( in CICM::Buffer buffer ); CICM::Status encrypt_non_blocking( in CICM::Buffer buffer, in CICM::TransId transaction_id ); CICM::Status encrypt_poll( in CICM::TransId transaction_id, out CICM::WriteStream::WriteStatus status ); }; interface KeyWrapStream : CICM::Stream { CICM::Status wrap_key( in CICM::Key key_ref ); }; interface Controller : CICM::MultiDomainController, CICM::SymKeyController, CICM::GenVectorController, CICM::ResyncController {}; interface NegotiatedController : CICM::NegotiatedController, CICM::GenVectorController, CICM::ResyncController {}; interface Conduit : CICM::Conduit, CICM::Encrypt::Controller, CICM::Encrypt::Stream {}; interface NegotiatedConduit : CICM::Conduit, CICM::Encrypt::NegotiatedController, CICM::Encrypt::Stream {}; interface WithMACConduit : CICM::AbstractMACConduit, CICM::Encrypt::Conduit {}; interface WithMACNegotiatedConduit : CICM::AbstractMACConduit, CICM::Encrypt::NegotiatedConduit {}; Lanz & Novikov Expires January 8, 2011 [Page 291] Internet-Draft CICM July 2010 interface WithSignConduit : CICM::AbstractSignConduit, CICM::Encrypt::Conduit {}; interface WithSignNegotiatedConduit : CICM::AbstractSignConduit, CICM::Encrypt::NegotiatedConduit {}; interface KeyWrapConduit : CICM::Encrypt::Controller, CICM::Encrypt::KeyWrapStream {}; interface ControllerNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Encrypt::NegotiatedController controller_ref ); }; interface Negotiator : CICM::Negotiator { CICM::Status complete( out CICM::Encrypt::NegotiatedConduit conduit_ref ); }; interface WithMACNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Encrypt::WithMACNegotiatedConduit conduit_ref ); }; interface WithSignNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Encrypt::WithSignNegotiatedConduit conduit_ref ); }; interface ChannelManager { CICM::Status negotiate_encrypt_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Encrypt::Negotiator negotiator_ref ); CICM::Status negotiate_encrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::SymKey mac_key_ref, in CICM::AsymKey nego_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, out CICM::Encrypt::WithMACNegotiator negotiator_ref ); CICM::Status negotiate_encrypt_with_sign_conduit( Lanz & Novikov Expires January 8, 2011 [Page 292] Internet-Draft CICM July 2010 in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey sign_key_ref, in CICM::AsymKey nego_key_ref, in CICM::AsymSigAlgorithmId sign_algorithm, out CICM::Encrypt::WithSignNegotiator negotiator_ref ); CICM::Status negotiate_encrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Encrypt::ControllerNegotiator negotiator_ref ); CICM::Status create_encrypt_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Encrypt::Conduit conduit_ref ); CICM::Status create_encrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::SymKey mac_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, in CICM::SymEncrAlgorithmId encr_algorithm, out CICM::Encrypt::WithMACConduit conduit_ref ); CICM::Status create_encrypt_with_sign_conduit( in CICM::RemotePort remote_port, in CICM::AsymKey sign_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::AsymSigAlgorithmId sign_algorithm, in CICM::SymEncrAlgorithmId encr_algorithm, out CICM::Encrypt::WithSignConduit conduit_ref ); CICM::Status create_key_wrap_conduit( in CICM::RemotePort remote_port, in CICM::SymKey kek_ref, in CICM::KeyWrapAlgorithmId algorithm, out CICM::Encrypt::KeyWrapConduit conduit_ref ); CICM::Status create_encrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Encrypt::Controller controller_ref ); Lanz & Novikov Expires January 8, 2011 [Page 293] Internet-Draft CICM July 2010 CICM::Status get_encrypt_stream( in CICM::LocalPort local_port, out CICM::Encrypt::Stream stream_ref ); }; }; module Decrypt { interface Stream : CICM::ReadStream { CICM::Status decrypt( out CICM::Buffer buffer ); CICM::Status decrypt_non_blocking( out CICM::Buffer buffer, in CICM::TransId transaction_id ); CICM::Status decrypt_poll( in CICM::TransId transaction_id, out CICM::ReadStream::ReadStatus status ); }; interface KeyUnwrapStream : CICM::Stream { CICM::Status unwrap_sym_key( out CICM::SymKey key_ref ); CICM::Status unwrap_asym_key( out CICM::AsymKey key_ref ); }; interface Controller : CICM::MultiDomainController, CICM::SymKeyController, CICM::SetVectorController, CICM::ResyncController {}; interface NegotiatedController : CICM::NegotiatedController, CICM::SetVectorController, CICM::ResyncController {}; interface Conduit : CICM::Conduit, CICM::Decrypt::Controller, CICM::Decrypt::Stream {}; interface NegotiatedConduit : CICM::Conduit, CICM::Decrypt::NegotiatedController, CICM::Decrypt::Stream {}; Lanz & Novikov Expires January 8, 2011 [Page 294] Internet-Draft CICM July 2010 interface WithMACConduit : CICM::AbstractMACVerifyConduit, CICM::Decrypt::Conduit {}; interface WithMACNegotiatedConduit : CICM::AbstractMACVerifyConduit, CICM::Decrypt::NegotiatedConduit {}; interface WithVerifyConduit : CICM::AbstractSigVerifyConduit, CICM::Decrypt::Conduit {}; interface WithVerifyNegotiatedConduit : CICM::AbstractSigVerifyConduit, CICM::Decrypt::NegotiatedConduit {}; interface KeyUnwrapConduit : CICM::Decrypt::Controller, CICM::Decrypt::KeyUnwrapStream {}; interface Negotiator : CICM::Negotiator { CICM::Status complete( out CICM::Decrypt::NegotiatedConduit conduit_ref ); }; interface ControllerNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Decrypt::NegotiatedController controller_ref ); }; interface WithMACNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Decrypt::WithMACNegotiatedConduit conduit_ref ); }; interface WithVerifyNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Decrypt::WithVerifyNegotiatedConduit conduit_ref ); }; interface ChannelManager { CICM::Status negotiate_decrypt_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Decrypt::Negotiator negotiator_ref ); CICM::Status negotiate_decrypt_with_mac_conduit( Lanz & Novikov Expires January 8, 2011 [Page 295] Internet-Draft CICM July 2010 in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::SymKey verify_key_ref, in CICM::AsymKey nego_key_ref, in CICM::SymMacAlgorithmId verify_algorithm, out CICM::Decrypt::WithMACNegotiator negotiator_ref ); CICM::Status negotiate_decrypt_with_verify_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey verify_key_ref, in CICM::AsymKey nego_key_ref, in CICM::AsymSigAlgorithmId verify_algorithm, out CICM::Decrypt::WithVerifyNegotiator negotiator_ref ); CICM::Status negotiate_decrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Decrypt::ControllerNegotiator negotiator_ref ); CICM::Status create_decrypt_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Decrypt::Conduit conduit_ref ); CICM::Status create_decrypt_with_mac_conduit( in CICM::RemotePort remote_port, in CICM::SymKey verify_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::SymMacAlgorithmId verify_algorithm, in CICM::SymEncrAlgorithmId decrypt_algorithm, out CICM::Decrypt::WithMACConduit conduit_ref ); CICM::Status create_decrypt_with_verify_conduit( in CICM::RemotePort remote_port, in CICM::AsymKey verify_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::AsymSigAlgorithmId verify_algorithm, in CICM::SymEncrAlgorithmId decrypt_algorithm, out CICM::Decrypt::WithVerifyConduit conduit_ref ); CICM::Status create_key_unwrap_conduit( in CICM::RemotePort remote_port, in CICM::SymKey kek_ref, in CICM::KeyWrapAlgorithmId algorithm, Lanz & Novikov Expires January 8, 2011 [Page 296] Internet-Draft CICM July 2010 out CICM::Decrypt::KeyUnwrapConduit conduit_ref ); CICM::Status create_decrypt_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Decrypt::Controller controller_ref ); CICM::Status get_decrypt_stream( in CICM::LocalPort local_port, out CICM::Decrypt::Stream stream_ref ); }; }; module Duplex { interface Stream : CICM::Encrypt::Stream, CICM::Decrypt::Stream {}; interface Controller : CICM::Encrypt::Controller, CICM::Decrypt::Controller {}; interface NegotiatedController : CICM::Encrypt::NegotiatedController, CICM::Decrypt::NegotiatedController {}; interface Conduit : CICM::Conduit, CICM::Duplex::Controller, CICM::Duplex::Stream {}; interface NegotiatedConduit : CICM::Duplex::NegotiatedController, CICM::Duplex::Stream {}; interface ControllerNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::Duplex::NegotiatedController controller_ref ); }; interface Negotiator : CICM::Negotiator { CICM::Status complete( out CICM::Duplex::NegotiatedConduit conduit_ref ); }; interface ChannelManager { Lanz & Novikov Expires January 8, 2011 [Page 297] Internet-Draft CICM July 2010 CICM::Status negotiate_duplex_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Duplex::Negotiator negotiator_ref ); CICM::Status negotiate_duplex_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::Duplex::ControllerNegotiator negotiator_ref ); CICM::Status create_duplex_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Duplex::Conduit conduit_ref ); CICM::Status create_duplex_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Duplex::Controller controller_ref ); CICM::Status get_duplex_stream( in CICM::LocalPort local_port, out CICM::Duplex::Stream stream_ref ); }; }; module BypassWrite { interface Stream : CICM::WriteStream { CICM::Status write_bypass( in CICM::Buffer buffer ); CICM::Status write_bypass_non_blocking( in CICM::Buffer buffer, in CICM::TransId transaction_id ); CICM::Status write_bypass_poll( in CICM::TransId transaction_id, out CICM::WriteStream::WriteStatus status ); }; interface Controller : CICM::MultiDomainController {}; Lanz & Novikov Expires January 8, 2011 [Page 298] Internet-Draft CICM July 2010 interface Conduit : CICM::Conduit, CICM::BypassWrite::Controller, CICM::BypassWrite::Stream {}; interface ChannelManager { CICM::Status create_bypass_write_conduit( in CICM::RemotePort remote_port, out CICM::BypassWrite::Conduit conduit_ref ); CICM::Status create_bypass_write_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, out CICM::BypassWrite::Controller controller_ref ); CICM::Status get_bypass_write_stream( in CICM::LocalPort local_port, out CICM::BypassWrite::Stream stream_ref ); }; }; module BypassRead { interface Stream : CICM::ReadStream { CICM::Status read_bypass( out CICM::Buffer buffer ); CICM::Status read_bypass_non_blocking( out CICM::Buffer buffer, in CICM::TransId transaction_id ); CICM::Status read_bypass_poll( in CICM::TransId transaction_id, out CICM::ReadStream::ReadStatus status ); }; interface Controller : CICM::MultiDomainController {}; interface Conduit : CICM::Conduit, CICM::BypassRead::Controller, CICM::BypassRead::Stream {}; interface ChannelManager { CICM::Status create_bypass_read_conduit( in CICM::RemotePort remote_port, out CICM::BypassRead::Conduit conduit_ref ); CICM::Status create_bypass_read_controller( Lanz & Novikov Expires January 8, 2011 [Page 299] Internet-Draft CICM July 2010 in CICM::LocalPort local_port, in CICM::RemotePort remote_port, out CICM::BypassRead::Controller controller_ref ); CICM::Status get_bypass_read_stream( in CICM::LocalPort local_port, out CICM::BypassRead::Stream stream_ref ); }; }; module EncryptBypass { interface Stream : CICM::Encrypt::Stream, CICM::BypassWrite::Stream { }; interface NegotiatedController : CICM::Encrypt::NegotiatedController {}; interface Controller : CICM::Encrypt::Controller {}; interface Conduit : CICM::Encrypt::Conduit, CICM::EncryptBypass::Stream {}; interface NegotiatedConduit : CICM::Encrypt::NegotiatedController, CICM::EncryptBypass::Stream {}; interface ControllerNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::EncryptBypass::NegotiatedController controller_ref ); }; interface Negotiator : CICM::Negotiator { CICM::Status complete( out CICM::EncryptBypass::NegotiatedConduit conduit_ref ); }; interface ChannelManager { CICM::Status negotiate_encrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::EncryptBypass::Negotiator negotiator_ref ); CICM::Status negotiate_encrypt_bypass_controller( in CICM::LocalPort local_port, Lanz & Novikov Expires January 8, 2011 [Page 300] Internet-Draft CICM July 2010 in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::EncryptBypass::ControllerNegotiator negotiator_ref ); CICM::Status create_encrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::EncryptBypass::Conduit conduit_ref ); CICM::Status create_encrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::EncryptBypass::Controller controller_ref ); CICM::Status get_encrypt_bypass_stream( in CICM::LocalPort local_port, out CICM::EncryptBypass::Stream stream_ref ); }; }; module DecryptBypass { interface Stream : CICM::Decrypt::Stream {}; interface NegotiatedController : CICM::Decrypt::NegotiatedController {}; interface Conduit : CICM::Decrypt::Conduit, CICM::DecryptBypass::Controller, CICM::DecryptBypass::Stream {}; interface NegotiatedConduit : CICM::Decrypt::NegotiatedConduit, CICM::DecryptBypass::NegotiatedController, CICM::DecryptBypass::Stream {}; interface ControllerNegotiator : CICM::Negotiator { CICM::Status complete( out CICM::DecryptBypass::NegotiatedController controller_ref ); }; interface Negotiator : CICM::Negotiator { CICM::Status complete( out CICM::DecryptBypass::NegotiatedConduit conduit_ref ); Lanz & Novikov Expires January 8, 2011 [Page 301] Internet-Draft CICM July 2010 }; interface ChannelManager { CICM::Status negotiate_decrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::DecryptBypass::Negotiator negotiator_ref ); CICM::Status negotiate_decrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::ProtocolId protocol, in CICM::AsymKey key_ref, out CICM::DecryptBypass::ControllerNegotiator negotiator_ref ); CICM::Status create_decrypt_bypass_conduit( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::DecryptBypass::Conduit conduit_ref ); CICM::Status create_decrypt_bypass_controller( in CICM::LocalPort local_port, in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::DecryptBypass::Controller controller_ref ); CICM::Status get_decrypt_bypass_stream( in CICM::LocalPort local_port, out CICM::DecryptBypass::Stream stream_ref ); }; }; module Emit { interface GetStream : CICM::ReadStream { CICM::Status get( in CICM::UInt32 length, out CICM::Buffer buffer ); CICM::Status get_non_blocking( in CICM::UInt32 length, out CICM::Buffer buffer, in CICM::TransId transaction_id ); CICM::Status get_poll( in CICM::TransId transaction_id, Lanz & Novikov Expires January 8, 2011 [Page 302] Internet-Draft CICM July 2010 out CICM::ReadStream::ReadStatus status ); }; interface Controller : CICM::Controller { readonly attribute CICM::RemotePort remote_port; }; interface KeyStreamGenController : CICM::SymKeyController, CICM::GenVectorController, CICM::Emit::Controller {}; interface PseudoRandomController : CICM::SymKeyController, CICM::Emit::Controller {}; interface RandomController : CICM::Emit::Controller {}; interface KeyStreamGenConduit : CICM::Conduit, CICM::SymKeyController, CICM::GenVectorController, CICM::Emit::GetStream {}; interface PseudoRandomConduit : CICM::Conduit, CICM::SymKeyController, CICM::Emit::GetStream {}; interface RandomConduit : CICM::Conduit, CICM::Emit::GetStream {}; interface ChannelManager { CICM::Status create_key_stream_gen_controller( in CICM::RemotePort remote_port, in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Emit::KeyStreamGenController controller_ref ); CICM::Status create_pseudorandom_controller( in CICM::RemotePort remote_port, in CICM::SymKey seed, out CICM::Emit::PseudoRandomController controller_ref ); CICM::Status create_random_controller( in CICM::RemotePort remote_port, out CICM::Emit::RandomController controller_ref ); Lanz & Novikov Expires January 8, 2011 [Page 303] Internet-Draft CICM July 2010 CICM::Status create_key_stream_gen_conduit( in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Emit::KeyStreamGenConduit conduit_ref ); CICM::Status create_pseudorandom_conduit( in CICM::SymKey seed, out CICM::Emit::PseudoRandomConduit conduit_ref ); CICM::Status create_random_conduit( out CICM::Emit::RandomConduit conduit_ref ); }; }; module Answer { interface PutStream : CICM::Stream { CICM::Status put( in CICM::Buffer buffer ); }; interface HashConduit : CICM::Conduit, CICM::Answer::PutStream { readonly attribute CICM::HashAlgorithmId algorithm; CICM::Status end_get_hash( out HashBuffer hash ); }; interface MACConduit : CICM::AbstractMACConduit, CICM::Answer::PutStream {}; interface MACVerifyConduit : CICM::AbstractMACVerifyConduit, CICM::Answer::PutStream {}; interface SignConduit : CICM::AbstractSignConduit, CICM::Answer::PutStream {}; interface SignHashConduit : CICM::Answer::SignConduit {}; interface VerifyConduit : CICM::AbstractSigVerifyConduit, CICM::Answer::PutStream {}; Lanz & Novikov Expires January 8, 2011 [Page 304] Internet-Draft CICM July 2010 interface VerifyHashConduit : CICM::Answer::VerifyConduit {}; interface ChannelManager { CICM::Status create_hash_conduit( in CICM::HashAlgorithmId algorithm, out CICM::Answer::HashConduit conduit_ref ); CICM::Status create_mac_conduit( in CICM::SymKey key_ref, in CICM::SymMacAlgorithmId algorithm, out CICM::Answer::MACConduit conduit_ref ); CICM::Status create_mac_verify_conduit( in CICM::SymKey key_ref, in CICM::SymMacAlgorithmId algorithm, out CICM::Answer::MACVerifyConduit conduit_ref ); CICM::Status create_sign_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::SignConduit conduit_ref ); CICM::Status create_sign_hash_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::SignHashConduit conduit_ref ); CICM::Status create_verify_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::VerifyConduit conduit_ref ); CICM::Status create_verify_hash_conduit( in CICM::AsymKey key_ref, in CICM::AsymSigAlgorithmId algorithm, out CICM::Answer::VerifyHashConduit conduit_ref ); }; }; module Coprocessor { interface Stream : CICM::Stream { CICM::Status get_final_buffer( out CICM::Buffer buffer ); }; interface EncryptConduit : CICM::Conduit, CICM::SymKeyController, Lanz & Novikov Expires January 8, 2011 [Page 305] Internet-Draft CICM July 2010 CICM::GenVectorController, CICM::ResyncController, CICM::Coprocessor::Stream { CICM::Status encrypt( in CICM::Buffer plaintext, out CICM::Buffer ciphertext ); }; interface EncryptWithMACConduit : CICM::AbstractMACConduit, CICM::Coprocessor::EncryptConduit {}; interface EncryptWithSignConduit : CICM::AbstractSignConduit, CICM::Coprocessor::EncryptConduit {}; interface DecryptConduit : CICM::Conduit, CICM::SymKeyController, CICM::SetVectorController, CICM::ResyncController, CICM::Coprocessor::Stream { CICM::Status decrypt( in CICM::Buffer ciphertext, out CICM::Buffer plaintext ); }; interface DecryptWithMACConduit : CICM::AbstractMACVerifyConduit, CICM::Coprocessor::DecryptConduit {}; interface DecryptWithVerifyConduit : CICM::AbstractSigVerifyConduit, CICM::Coprocessor::DecryptConduit {}; interface ChannelManager { CICM::Status create_coprocessor_encrypt_conduit( in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Coprocessor::EncryptConduit conduit_ref ); CICM::Status create_coprocessor_encrypt_with_mac_conduit( in CICM::SymKey mac_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, in CICM::SymEncrAlgorithmId encrypt_algorithm, Lanz & Novikov Expires January 8, 2011 [Page 306] Internet-Draft CICM July 2010 out CICM::Coprocessor::EncryptWithMACConduit conduit_ref ); CICM::Status create_coprocessor_encrypt_with_sign_conduit( in CICM::AsymKey sign_key_ref, in CICM::SymKey encrypt_key_ref, in CICM::AsymSigAlgorithmId sign_algorithm, in CICM::SymEncrAlgorithmId encrypt_algorithm, out CICM::Coprocessor::EncryptWithSignConduit conduit_ref ); CICM::Status create_coprocessor_decrypt_conduit( in CICM::SymKey key_ref, in CICM::SymEncrAlgorithmId algorithm, out CICM::Coprocessor::DecryptConduit conduit_ref ); CICM::Status create_coprocessor_decrypt_with_mac_conduit( in CICM::SymKey mac_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::SymMacAlgorithmId mac_algorithm, in CICM::SymEncrAlgorithmId encrypt_algorithm, out CICM::Coprocessor::DecryptWithMACConduit conduit_ref ); CICM::Status create_coprocessor_decrypt_with_verify_conduit( in CICM::AsymKey verify_key_ref, in CICM::SymKey decrypt_key_ref, in CICM::AsymSigAlgorithmId verify_algorithm, in CICM::SymEncrAlgorithmId decrypt_algorithm, out CICM::Coprocessor::DecryptWithVerifyConduit conduit_ref ); }; }; interface Iterator { typedef CICM::UInt32 Status; const CICM::Iterator::Status C_ITERATOR_HAS_NEXT = 0x00006031; const CICM::Iterator::Status C_ITERATOR_NO_MORE = 0x00006032; CICM::Status has_next( out CICM::Iterator::Status has_next ); }; interface AsymKeyIterator : CICM::Iterator { CICM::Status get_next( out CICM::AsymKey asym_key_ref ); }; interface LogEntryIterator : CICM::Iterator { CICM::Status get_next( out CICM::LogEntry log_entry_ref ); }; Lanz & Novikov Expires January 8, 2011 [Page 307] Internet-Draft CICM July 2010 interface ModuleAssnIterator : CICM::Iterator { CICM::Status get_next( out CICM::ModuleRecord module_rec_ref ); }; interface PackageIterator : CICM::Iterator { CICM::Status get_next( out CICM::Package package_ref ); }; interface RoleIdIterator : CICM::Iterator { CICM::Status get_next( out CICM::RoleId role_id ); }; interface SymKeyIterator : CICM::Iterator { CICM::Status get_next( out CICM::SymKey sym_key_ref ); }; interface TokenAssnIterator : CICM::Iterator { CICM::Status get_next( out CICM::TokenRecord token_rec_ref ); }; interface UserIdIterator : CICM::Iterator { CICM::Status get_next( out CICM::UserId user_id ); }; interface ChannelManager : CICM::Answer::ChannelManager, CICM::BypassRead::ChannelManager, CICM::BypassWrite::ChannelManager, CICM::Coprocessor::ChannelManager, CICM::Decrypt::ChannelManager, CICM::DecryptBypass::ChannelManager, CICM::Duplex::ChannelManager, CICM::Emit::ChannelManager, CICM::Encrypt::ChannelManager, CICM::EncryptBypass::ChannelManager { CICM::Status create_controller_group( out CICM::ControllerGroup controller_group_ref ); }; interface LogManager { readonly attribute CICM::LogEntryIterator log_entry_iterator; Lanz & Novikov Expires January 8, 2011 [Page 308] Internet-Draft CICM July 2010 CICM::Status retrieve( out CICM::Buffer log_ref ); CICM::Status destroy(); }; interface LoginManager { CICM::Status login( in CICM::UserId user, in CICM::CharString password, out CICM::Login login_ref ); CICM::Status login_auth_data( in CICM::UserId user, in CICM::CharString password, in CICM::Buffer auth_data, out CICM::Login login_ref ); }; interface PackageManager { readonly attribute CICM::PackageIterator package_iterator; CICM::Status import_package( in CICM::Package::PackageType package_type, out CICM::PackageImporter importer_ref ); CICM::Status import_package_with_key( in CICM::Package::PackageType package_type, in CICM::SymKey key_ref, out CICM::PackageImporter importer_ref ); CICM::Status get_package_by_id( in CICM::PackageId package_id, out CICM::Package package_ref ); CICM::Status reencrypt_software(); }; interface TestManager { typedef CICM::UInt32 Status; const CICM::TestManager::Status C_TEST_SUCCESS = 0x00006062; const CICM::TestManager::Status C_TEST_FAILURE = 0x00006064; CICM::Status run_test( in CICM::Buffer test_parameters, out CICM::TestManager::Status status ); CICM::Status run_test_get_results( Lanz & Novikov Expires January 8, 2011 [Page 309] Internet-Draft CICM July 2010 in CICM::Buffer test_parameters, out CICM::Buffer test_results ); }; interface TokenManager { readonly attribute CICM::ModuleAssnIterator module_association_iterator; readonly attribute CICM::TokenAssnIterator token_association_iterator; CICM::Status associate( out CICM::ModuleRecord module_rec, out CICM::TokenRecord token_rec ); CICM::Status disassociate(); CICM::Status disassociate_missing_module( in CICM::ModuleRecord module_rec ); CICM::Status disassociate_missing_token( in CICM::TokenRecord token_rec ); }; interface UserManager { readonly attribute CICM::UserIdIterator user_iterator; readonly attribute CICM::RoleIdIterator role_iterator; CICM::Status add( in CICM::UserId user, in CICM::CharString password ); CICM::Status modify( in CICM::UserId user, in CICM::CharString password ); CICM::Status remove( in CICM::UserId user ); CICM::Status associate( in CICM::UserId user, in CICM::RoleId role ); CICM::Status disassociate( in CICM::UserId user, in CICM::RoleId role ); }; Lanz & Novikov Expires January 8, 2011 [Page 310] Internet-Draft CICM July 2010 interface KeyProtocolSender : CICM::Negotiator { typedef CICM::UInt32 Condition; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_OKAY = 0x00006045; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_DONE = 0x00006046; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_ERROR = 0x00006049; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_DISPLAY = 0x0000604A; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_ABORTED = 0x0000604C; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_MESSAGE_INVALID = 0x0000604F; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_MESSAGE_INTEGRITY = 0x00006051; const CICM::KeyProtocolSender::Condition C_PROTOCOL_SEND_PROTOCOL_VIOLATION = 0x00006052; CICM::Status put_into_module( in CICM::ProtocolId protocol, in CICM::Buffer message, out CICM::KeyProtocolSender::Condition condition ); CICM::Status put_into_module_algo( in CICM::ProtocolId protocol, in CICM::Buffer message, in CICM::SymEncrAlgorithmId algorithm, out CICM::KeyProtocolSender::Condition condition ); }; interface KeyProtocolReceiver { typedef CICM::UInt32 Condition; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_OKAY = 0x00006034; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_DONE = 0x00006037; Lanz & Novikov Expires January 8, 2011 [Page 311] Internet-Draft CICM July 2010 const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_BUSY = 0x00006038; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_ERROR = 0x0000603B; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_ABORTED = 0x0000603D; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_MESSAGE_INVALID = 0x0000603E; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_MESSAGE_INTEGRITY = 0x00006040; const CICM::KeyProtocolReceiver::Condition C_PROTOCOL_RECEIVE_VIOLATION = 0x00006043; CICM::Status abort(); CICM::Status get_from_module( in CICM::ProtocolId protocol, out CICM::Buffer message, out CICM::KeyProtocolReceiver::Condition condition ); CICM::Status get_key( out CICM::SymKey key_ref ); }; interface SymKeyManager { readonly attribute CICM::SymKeyIterator symkey_iterator; readonly attribute CICM::KeyProtocolSender key_protocol_sender; readonly attribute CICM::KeyProtocolReceiver key_protocol_receiver; CICM::Status get_key_by_id( in CICM::KeyId key_id, out CICM::SymKey key_ref ); CICM::Status get_key_by_phys_location( in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); CICM::Status get_key_last_filled( out CICM::SymKey key_ref ); CICM::Status import_key( in CICM::Buffer key_material, out CICM::SymKey key_ref ); Lanz & Novikov Expires January 8, 2011 [Page 312] Internet-Draft CICM July 2010 CICM::Status import_key_into_phys_location( in CICM::Buffer key_material, in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); CICM::Status import_key_via_fill( in CICM::LocalPort fill_port, out CICM::SymKey key_ref ); CICM::Status import_key_via_fill_into_phys_location( in CICM::LocalPort fill_port, in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); CICM::Status generate_key( in CICM::SymEncrAlgorithmId algorithm, out CICM::SymKey key_ref ); CICM::Status derive_key( in CICM::CharString password, in CICM::Buffer salt, in CICM::UInt32 iteration_count, in CICM::HashAlgorithmId hash_algorithm, in CICM::SymEncrAlgorithmId algorithm, out CICM::SymKey key_ref ); CICM::Status derive_deterministic_key( in CICM::SymKey key_prod_key, in CICM::CharString shared_secret, in CICM::SymEncrAlgorithmId algorithm, out CICM::SymKey key_ref ); }; interface AsymKeyManager { readonly attribute CICM::AsymKeyIterator asymkey_iterator; CICM::Status get_key_by_id( in CICM::KeyId key_id, out CICM::AsymKey key_ref ); CICM::Status get_key_by_phys_location( in CICM::UInt32 phys_location, out CICM::AsymKey key_ref ); CICM::Status get_key_last_filled( out CICM::AsymKey key_ref ); CICM::Status import_key( Lanz & Novikov Expires January 8, 2011 [Page 313] Internet-Draft CICM July 2010 in CICM::Buffer key_material, out CICM::AsymKey key_ref ); CICM::Status import_key_into_phys_location( in CICM::Buffer key_material, in CICM::UInt32 phys_location, out CICM::SymKey key_ref ); CICM::Status import_key_via_fill( in CICM::LocalPort fill_port, out CICM::AsymKey key_ref ); CICM::Status import_key_via_fill_into_phys_location( in CICM::LocalPort fill_port, in CICM::UInt32 phys_location, out CICM::AsymKey key_ref ); CICM::Status generate_key_pair( in CICM::AsymEncrAlgorithmId algorithm, out CICM::AsymKey key_ref ); }; interface KeyDatabase { CICM::Status zeroize(); CICM::Status reencrypt(); }; interface CryptoModule { readonly attribute CICM::ModuleId module_id; readonly attribute CICM::CharString manufacturer; readonly attribute CICM::CharString model; readonly attribute CICM::CharString serial_number; readonly attribute CICM::CharString module_version; readonly attribute CICM::CharString software_version; readonly attribute CICM::CharString driver_version; readonly attribute CICM::CharString library_version; readonly attribute CICM::RoleId role; attribute CICM::CharString date_time; readonly attribute CICM::SymKeyManager sym_key_manager; readonly attribute CICM::AsymKeyManager asym_key_manager; readonly attribute CICM::KeyDatabase key_database; readonly attribute CICM::ChannelManager channel_manager; readonly attribute CICM::ModuleEventManager event_manager; readonly attribute CICM::PackageManager package_manager; readonly attribute CICM::TokenManager token_manager; readonly attribute CICM::UserManager user_manager; readonly attribute CICM::LoginManager login_manager; readonly attribute CICM::TestManager test_manager; Lanz & Novikov Expires January 8, 2011 [Page 314] Internet-Draft CICM July 2010 readonly attribute CICM::LogManager log_manager; CICM::Status configure_fill_interface( in CICM::Buffer interface_parameters, in CICM::LocalPort fill_port ); CICM::Status reset(); }; interface CICMRoot { CICM::Status get_module_by_id( in CICM::ModuleId id, out CICM::CryptoModule crypto_module_ref ); }; }; Authors' Addresses Daniel J. Lanz The MITRE Corporation Email: dlanz@mitre.org Lev Novikov The MITRE Corporation Email: lnovikov@mitre.org Lanz & Novikov Expires January 8, 2011 [Page 315]