Individual Submission B. Neal-Joslin, Ed. Internet-Draft HP Expires: March 5, 2007 L. Howard PADL M. Ansari Infoblox September 2006 A Configuration Profile Schema for LDAP-based agents draft-joslin-config-schema-17.txt Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on March 5, 2007. Copyright Notice Copyright (C) The Internet Society (2006). Abstract This document consists of two primary components, a schema for agents that make use of the Lightweight Directory Access protocol (LDAP) and a proposed use case of that schema, for distributed configuration of similar directory user agents. A set of attribute types and an objectclass are proposed. In the proposed use case, directory user Neal-Joslin, et al. Expires March 5, 2007 [Page 1] Internet-Draft LDAP-based Agent Configuration Schema September 2006 agents (DUAs) can use this schema to determine directory data location and access parameters for specific services they support. In addition, in the proposed use case, attribute and objectclass mapping allows DUAs to re-configure their expected (default) schema to match that of the end user's environment. This document is intended to be a skeleton for future documents that describe configuration of specific DUA services. Table of Contents 1. Background and Motivation . . . . . . . . . . . . . . . . . . 4 2. General Information . . . . . . . . . . . . . . . . . . . . . 6 2.1. Requirements notation . . . . . . . . . . . . . . . . . . 6 2.2. Attributes Summary . . . . . . . . . . . . . . . . . . . . 6 2.3. Object Classes Summary . . . . . . . . . . . . . . . . . . 6 2.4. Common Syntax/Encoding Definitions . . . . . . . . . . . . 6 3. Schema Definition . . . . . . . . . . . . . . . . . . . . . . 8 3.1. Attribute Definitions . . . . . . . . . . . . . . . . . . 8 3.2. Class Definition . . . . . . . . . . . . . . . . . . . . . 10 4. DUA Implementation Details . . . . . . . . . . . . . . . . . . 12 4.1. Interpreting the preferredServerList attribute . . . . . . 12 4.2. Interpreting the defaultServerList attribute . . . . . . . 13 4.3. Interpreting the defaultSearchBase attribute . . . . . . . 14 4.4. Interpreting the authenticationMethod attribute . . . . . 15 4.5. Interpreting the credentialLevel attribute . . . . . . . . 16 4.6. Interpreting the serviceSearchDescriptor attribute . . . . 18 4.7. Interpreting the attributeMap attribute . . . . . . . . . 21 4.8. Interpreting the searchTimeLimit attribute . . . . . . . . 24 4.9. Interpreting the bindTimeLimit attribute . . . . . . . . . 25 4.10. Interpreting the followReferrals attribute . . . . . . . . 25 4.11. Interpreting the dereferenceAliases attribute . . . . . . 26 4.12. Interpreting the profileTTL attribute . . . . . . . . . . 26 4.13. Interpreting the objectclassMap attribute . . . . . . . . 27 4.14. Interpreting the defaultSearchScope attribute . . . . . . 28 4.15. Interpreting the serviceAuthenticationMethod attribute . . 29 4.16. Interpreting the serviceCredentialLevel attribute . . . . 29 5. Binding to the Directory Server . . . . . . . . . . . . . . . 31 6. Security Considerations . . . . . . . . . . . . . . . . . . . 32 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 33 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 34 8.1. Registration of Object Classes . . . . . . . . . . . . . . 34 8.2. Registration of Attribute Types . . . . . . . . . . . . . 34 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 36 9.1. Normative References . . . . . . . . . . . . . . . . . . . 36 9.2. Informative References . . . . . . . . . . . . . . . . . . 37 Appendix A. Examples . . . . . . . . . . . . . . . . . . . . . . 38 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 41 Neal-Joslin, et al. Expires March 5, 2007 [Page 2] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Intellectual Property and Copyright Statements . . . . . . . . . . 42 Neal-Joslin, et al. Expires March 5, 2007 [Page 3] Internet-Draft LDAP-based Agent Configuration Schema September 2006 1. Background and Motivation LDAP [RFC4510] has brought about a nearly ubiquitous acceptance of the directory server. Many client applications (DUAs) are being created that use LDAP directories for many different services. And although the LDAP protocol has eased the development of these applications, some challenges still exist for both developers and directory administrators. The authors of this document are implementers of DUAs described by [RFC2307]. In developing these agents, we felt there were several issues that still need to be addressed to ease the deployment and configuration of a large network of these DUAs. One of these challenges stems from the lack of a utopian schema. A utopian schema would be one that every application developer could agree upon and that would support every application. Unfortunately today, many DUAs define their own schema, even when they provide similar services (like RFC 2307 vs. Microsoft's Services for Unix [MSSFU]). These schemas contain similar attributes, but use different attribute names. This can lead to data redundancy within directory entries and cause directory administrators unwanted challenges, updating schemas and synchronizing data. Or, in a more common case, two or more applications may agree on common schema elements, but choose a different schema for other elements of data that might also be shareable between the applications. While data synchronization and translation tools exist, the authors of this document believe there is value in providing this capability in the directory user agent itself. Aside from proposing a schema for general use, one goal of this document is to eliminate data redundancy by having DUAs configure themselves to the schema of the deployed directory, instead of forcing the DUA's own schema on the directory. Another goal of this document is to provide the DUA with enough configuration information so that it can discover how to retrieve its data in the directory, such as what locations to search in the directory tree. Finally, this document intends to describe a configuration method for DUAs that can be shared among many DUAs, on various platforms, providing as such, a configuration profile. The purpose of this profile is to centralize and simplify management of DUAs. This document is intended to provide the skeleton framework for future drafts, which will describe the individual implementation details for the particular services provided by that DUA. The Neal-Joslin, et al. Expires March 5, 2007 [Page 4] Internet-Draft LDAP-based Agent Configuration Schema September 2006 authors of this document plan to develop such a document for the Network Information Service DUA, described by RFC 2307 or its successor. We expect that as DUAs take advantage of this configuration scheme, each DUA will require additional configuration parameters, not specified by this document. Thus, we would expect that new auxiliary object classes, containing new configuration attributes will be created, and then joined with the structural class defined by this document to create a configuration profile for a particular DUA service. And that by joining various auxiliary objectclasses for different DUA services, that configuration of various DUA services can be controlled by a single configuration profile entry. Neal-Joslin, et al. Expires March 5, 2007 [Page 5] Internet-Draft LDAP-based Agent Configuration Schema September 2006 2. General Information The schema defined by this document is defined under the "DUA Configuration Schema." This schema is derived from the OID: iso (1) org (3) dod (6) internet (1) private (4) enterprises (1) Hewlett- Packard Company (11) directory (1) LDAP-UX Integration Project (3) DUA Configuration Schema (1). This OID is represented in this document by the keystring "DUAConfSchemaOID" (1.3.6.1.4.1.11.1.3.1). 2.1. Requirements notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 2.2. Attributes Summary The following attributes are defined in this document: preferredServerList defaultServerList defaultSearchBase defaultSearchScope authenticationMethod credentialLevel serviceSearchDescriptor serviceCredentialLevel serviceAuthenticationMethod attributeMap objectclassMap searchTimeLimit bindTimeLimit followReferrals dereferenceAliases profileTTL 2.3. Object Classes Summary The following object class is defined in this document: DUAConfigProfile 2.4. Common Syntax/Encoding Definitions The proposed string encodings used by the attributes defined in this document can be found in Section 4. This document makes use of ABNF [RFC4234] for defining new encodings. Neal-Joslin, et al. Expires March 5, 2007 [Page 6] Internet-Draft LDAP-based Agent Configuration Schema September 2006 The following syntax definitions are used throughout this document. The list of used syntaxes are: +---------------------------+---------------------------------------+ | Key | Source | +---------------------------+---------------------------------------+ | keystring | as defined by [RFC4512] section 1.4 | | | | | descr | as defined by RFC 4512 section 1.4 | | | | | SP | as defined by RFC 4512 section 1.4 | | | | | WSP | as defined by RFC 4512 section 1.4 | | | | | base | as defined by distinguishedName in | | | [RFC4514] | | | | | distinguishedName | as defined by RFC 4514 section 2 | | | | | relativeDistinguishedName | as defined by RFC 4514 section 2 | | | | | scope | as defined by [RFC4516] section 2 | | | | | host | as defined by [RFC3986] section 3.2.2 | | | | | hostport | host [":" port ] | | | | | port | as defined by RFC 3986 section 3.2.3 | | | | | serviceID | same as keystring | +---------------------------+---------------------------------------+ This document does not define new syntaxes that must be supported by the directory server. Instead these syntaxes are merely expected to be interpreted by the the DUA. As referenced in the schema definition in Section 3, most encodings are expected to be stored in attributes using common syntaxes, such as the Directory String syntax, as defined in section 3.3.6 by [RFC4517]. Refer to RFC 4517 for additional syntaxes used by this schema. Neal-Joslin, et al. Expires March 5, 2007 [Page 7] Internet-Draft LDAP-based Agent Configuration Schema September 2006 3. Schema Definition This section defines a proposed schema. This schema does not require definition of new matching rules or syntaxes. And it may be used for any purpose seen. A proposed use of this schema to support elements of configuration of a directory user agent are described in Section 4. 3.1. Attribute Definitions This section contains attribute definitions used by agents. The syntax used to describe these attributes is defined in [RFC4512], section 4.1.2. Individual syntaxes and matching rules used within these descriptions are described in [RFC4517], sections 3.3 and 4.2 respectively. ( 1.3.6.1.4.1.11.1.3.1.1.0 NAME 'defaultServerList' DESC 'List of default servers' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.1 NAME 'defaultSearchBase' DESC 'Default base for searches' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.2 NAME 'preferredServerList' DESC 'List of preferred servers' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.3 NAME 'searchTimeLimit' DESC 'Maximum time an agent or service allows for a search to complete' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.4 NAME 'bindTimeLimit' DESC 'Maximum time an agent or service allows for a bind operation to complete' EQUALITY integerMatch Neal-Joslin, et al. Expires March 5, 2007 [Page 8] Internet-Draft LDAP-based Agent Configuration Schema September 2006 ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.5 NAME 'followReferrals' DESC 'An agent or service does or should follow referrals' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.6 NAME 'authenticationMethod' DESC 'Identifies the types of authentication methods either used, required or provided by a service or peer' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.7 NAME 'profileTTL' DESC 'Time to live, in seconds, before a profile is considered stale' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.9 NAME 'attributeMap' DESC 'Attribute mappings used, required or supported by an agent or service' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) ( 1.3.6.1.4.1.11.1.3.1.1.10 NAME 'credentialLevel' DESC 'Identifies type of credentials either used, required or supported by an agent or service' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.11 NAME 'objectclassMap' DESC 'Objectclass mappings used, required or supported by an agent or service' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) ( 1.3.6.1.4.1.11.1.3.1.1.12 NAME 'defaultSearchScope' DESC 'Default scope used when performing a search' EQUALITY caseIgnoreIA5Match Neal-Joslin, et al. Expires March 5, 2007 [Page 9] Internet-Draft LDAP-based Agent Configuration Schema September 2006 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) ( 1.3.6.1.4.1.11.1.3.1.1.13 NAME 'serviceCredentialLevel' DESC 'Specifies the type of credentials either used, required or supported by a specific service' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) ( 1.3.6.1.4.1.11.1.3.1.1.14 NAME 'serviceSearchDescriptor' DESC 'Specifies search descriptors required, used or supported by a particular service or agent' EQUALITY caseExactMatch SUBSTR caseExactSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) ( 1.3.6.1.4.1.11.1.3.1.1.15 NAME 'serviceAuthenticationMethod' DESC 'Specifies types authentication methods either used, required or supported by a particular service' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) ( 1.3.6.1.4.1.11.1.3.1.1.16 NAME 'dereferenceAliases' DESC 'Specifies if a service or agent either requires, supports or uses dereferencing of aliases.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) 3.2. Class Definition The objectclass below is constructed from the attributes defined in Section 3.1, with the exception of the cn attribute, which is defined in [RFC4519]. cn is used to represent the name of the DUA configuration profile and is recommended for the relative distinguished name (RDN) [RFC4514] naming attribute. This object class is used specifically by the DUA described in Section 4. The syntax used to describe this object class is defined in [RFC4519], section 4.1.1. Neal-Joslin, et al. Expires March 5, 2007 [Page 10] Internet-Draft LDAP-based Agent Configuration Schema September 2006 ( 1.3.6.1.4.1.11.1.3.1.2.5 NAME 'DUAConfigProfile' SUP top STRUCTURAL DESC 'Abstraction of a base configuration for a DUA' MUST ( cn ) MAY ( defaultServerList $ preferredServerList $ defaultSearchBase $ defaultSearchScope $ searchTimeLimit $ bindTimeLimit $ credentialLevel $ authenticationMethod $ followReferrals $ dereferenceAliases $ serviceSearchDescriptor $ serviceCredentialLevel $ serviceAuthenticationMethod $ objectclassMap $ attributeMap $ profileTTL ) ) Neal-Joslin, et al. Expires March 5, 2007 [Page 11] Internet-Draft LDAP-based Agent Configuration Schema September 2006 4. DUA Implementation Details This section describes an implementation of the schema described in Section 3. Details about how a DUA should format and interpret the defined attributes are described below. Agents that make use of the DUAConfigProfile object class are expected to follow the specifications in this section. Note: Many of the subsections in this section contain examples. Unless otherwise specified, these examples are rendered using the LDIF format[RFC2849]. 4.1. Interpreting the preferredServerList attribute Interpretation: As described by the syntax, the preferredServerList parameter is a white-space separated list of server addresses and associated port numbers. When the DUA needs to contact a directory server agent (DSA), the DUA MUST first attempt to contact one of the servers listed in the preferredServerList attribute. The DUA MUST contact the DSA specified by the first server address in the list. If that DSA is unavailable, the remaining DSAs MUST be queried in the order provided (left to right) until a connection is established with a DSA. Once a connection with a DSA is established, the DUA SHOULD NOT attempt to establish a connection with the remaining DSAs. The purpose of enumerating multiple DSAs is not for supplemental data, but for high availability of replicated data. This is also the main reason why an LDAP URL[RFC3986] syntax was not selected for this document. If the DUA is unable to contact any of the DSAs specified by the preferredServerList, the defaultServerList attribute MUST be examined, as described in Section 4.2. The servers identified by the preferredServerList MUST be contacted before attempting to contact any of the servers specified by the defaultServerList. Syntax: serverList = hostport *(SP [hostport]) Default Value: The preferredServerList attribute does not have a default value. Instead a DUA MUST examine the defaultServerList attribute. Neal-Joslin, et al. Expires March 5, 2007 [Page 12] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Other attribute notes: This attribute is used in conjunction with the defaultServerList attribute. Please see Section 4.2 for additional implementation notes. Determining how the DUA should query the DSAs also depends on the additional configuration attributes, credentialLevel, serviceCredentialLevel, bindTimeLimit, serviceAuthenticationMethod and authenticationMethod. Please review Section 5 for details on how a DUA should properly bind to a DSA. Example: preferredServerList: 192.168.169.170 ldap1.mycorp.com ldap2:1389 [1080::8:800:200C:417A]:389 4.2. Interpreting the defaultServerList attribute Interpretation: The defaultServerList attribute MUST only be examined if the preferredServerList attribute is not provided, or the DUA is unable to establish a connection with any of the DSAs specified by the preferredServerList. If more than one address is provided, the DUA may choose to either accept the order provided, or choose to create its own order, based on what the DUA determines is the "best" order of DSAs to query. For example, the DUA may choose to examine the server list and choose to query the DSAs in order based on the "closest" server or the server with the least amount of "load". Interpretation of the "best" server order is entirely up to the DUA, and not part of this document. Once the order of server addresses is determined, the DUA contacts the DSA specified by the first server address in the list. If that DSA is unavailable, the remaining DSAs SHOULD be queried until an available DSA is found or no more DSAs are available. If a server address or port is invalid, the DUA SHOULD proceed to the next server address as described just above. Syntax: serverList = hostport *(SP [hostport]) Neal-Joslin, et al. Expires March 5, 2007 [Page 13] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Default Value: If a defaultServerList attribute is not provided, the DUA MAY attempt to contact the same DSA that provided the configuration profile entry itself. The default DSA is contacted only if the preferredServerList attribute is also not provided. Other attribute notes: This attribute is used in conjunction with the preferredServerList attribute. Please see Section 4.1 for additional implementation notes. Determining how the DUA should query the DSAs also depends on the additional configuration attributes, credentialLevel, serviceCredentialLevel, bindTimeLimit, serviceAuthenticationMethod and authenticationMethod. Please review Section 5 for details on how a DUA should properly contact a DSA. Example: defaultServerList: 192.168.169.170 ldap1.mycorp.com ldap2:1389 [1080::8:800:200C:417A]:5912 4.3. Interpreting the defaultSearchBase attribute Interpretation: When a DUA needs to search the DSA for information, this attribute provides the base for the search. This parameter can be overridden or appended by the serviceSearchDescriptor attribute. See Section 4.6. Syntax: Defined by OID 1.3.6.1.4.1.1466.115.121.1.12 [RFC4517] Default Value: There is no default value for the defaultSearchBase. A DUA MAY define its own method for determining the search base, if the defaultSearchBase is not provided. Other attribute notes: This attribute is used in conjunction with the serviceSearchDescriptor attribute. See Section 4.6. Neal-Joslin, et al. Expires March 5, 2007 [Page 14] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Example: defaultSearchBase: dc=mycompany,dc=com 4.4. Interpreting the authenticationMethod attribute Interpretation: The authenticationMethod attribute defines an ordered list of LDAP bind methods to be used when attempting to contact a DSA. The serviceAuthenticationMethod overrides this value for a particular service (see Section 4.15.) Each method MUST be attempted in the order provided by the attribute, until a successful LDAP bind is performed ("none" is assumed to always be successful.) However the DUA MAY skip over one or more methods. See Section 5 for more information. none - The DUA does not perform an LDAP bind. simple - The DUA performs an LDAP simple bind. sasl - The DUA performs an LDAP SASL [RFC4422] bind using the specified SASL mechanism and options. tls - The DUA performs an LDAP StartTLS operation followed by the specified bind method (for more information refer to section 4.14 of [RFC4511]). Syntax: authMethod = method *(";" method) method = none / simple / sasl / tls none = "none" simple = "simple" sasl = "sasl/" saslmech [ ":" sasloption ] sasloption = "auth-conf" / "auth-int" Neal-Joslin, et al. Expires March 5, 2007 [Page 15] Internet-Draft LDAP-based Agent Configuration Schema September 2006 tls = "tls:" (none / simple / sasl) saslmech = SASL mechanism name as defined in [SASLMECH] Note: Although multiple authentication methods may be specified in the syntax, at most one of each type is allowed. I.E. "simple;simple" is invalid. Default Value: If the authenticationMethod or serviceAuthenticationMethod (for that particular service) attributes are not provided, the DUA MAY choose to bind to the DSA using any method defined by the DUA. However, if either authenticationMethod or serviceAuthenticationMethod are provided, the DUA MUST only use the methods specified. Other attribute notes: When using TLS, the string "tls:sasl/EXTERNAL" implies that both client and server (DSA and DUA) authentication is to be performed. Any other TLS authentication method implies server- only (DSA side credential) authentication, along with the other SASL method used for DUA-side authentication. Determining how the DUA should bind to the DSAs also depends on the additional configuration attributes, credentialLevel, serviceCredentialLevel, serviceAuthenticationMethod and bindTimeLimit. Please review Section 5 for details on how to properly bind to a DSA. Example: authenticationMethod: tls:simple;sasl/DIGEST-MD5 (see [RFC2831]) 4.5. Interpreting the credentialLevel attribute Interpretation: The credentialLevel attribute defines what type(s) of credential(s) the DUA MUST use when contacting the DSA. The serviceCredentialLevel overrides this value for a particular service (Section 4.16.) The credentialLevel can contain more than one credential type, separated by white space. Neal-Joslin, et al. Expires March 5, 2007 [Page 16] Internet-Draft LDAP-based Agent Configuration Schema September 2006 anonymous The DUA SHOULD NOT use a credential when binding to the DSA. proxy The DUA SHOULD use a known proxy identity when binding to the DSA. A proxy identity is a specific credential that was created to represent the DUA. This document does not define how the proxy user should be created, or how the DUA should determine what the proxy user's credential is. This functionality is up to each implementation. self When the DUA is acting on behalf of a known identity, the DUA MUST attempt to bind to the DSA as that identity. The DUA should contain methods to determine the identity of the user such that that identity can be authenticated by the directory server using the defined authentication methods. If the credentialLevel contains more than one credential type, the DUA MUST use the credential types in the order specified. However, the DUA MAY skip over one or more credential types. As soon as the DUA is able to successfully bind to the DSA, the DUA SHOULD NOT attempt to bind using the remaining credential types. Syntax: credentialLevel = level *(SP level) level = self / proxy / anonymous self = "self" proxy = "proxy" anonymous = "anonymous" Note: Although multiple credential levels may be specified in the syntax, at most one of each type is allowed. Refer to implementation notes in Section 5 for additional syntax requirements for the credentialLevel attribute. Default Value: If the credentialLevel attribute is not defined, the DUA SHOULD NOT use a credential when binding to the DSA (also known as Neal-Joslin, et al. Expires March 5, 2007 [Page 17] Internet-Draft LDAP-based Agent Configuration Schema September 2006 anonymous.) Other attribute notes: Determining how the DUA should bind to the DSAs also depends on the additional configuration attributes, authenticationMethod, serviceAuthenticationMethod, serviceCredentialLevel and bindTimeLimit. Please review Section 5 for details on how to properly bind to a DSA. Example: credentialLevel: proxy anonymous 4.6. Interpreting the serviceSearchDescriptor attribute Interpretation: The serviceSearchDescriptor attribute defines how and where a DUA SHOULD search for information for a particular service. The serviceSearchDescriptor contains a serviceID, followed by one or more base-scope-filter triples. These base-scope-filter triples are used to define searches only for the specific service. Multiple base-scope-filters allow the DUA to search for data in multiple locations in the directory information tree (DIT). Although this syntax is very similar to the LDAP URL[RFC3986], this draft requires the ability to supply multiple hosts as part of the configuration of the DSA. In addition, an ordered list of search descriptors is required, which can not be specified by the LDAP URL. The serviceSearchDescriptor might also contain the DN of an entry that will contain an alternate profile. The DSA SHOULD re-evaluate the alternate profile and perform searches as specified by that profile. If the base, as defined in the serviceSearchDescriptor, is followed by the "," (ASCII 0x2C) character, this base is known as a relative base. This relative base may be constructed of one or more RDN components. In this case, the DUA MUST define the search base by appending the relative base with the defaultSearchBase. Syntax: Neal-Joslin, et al. Expires March 5, 2007 [Page 18] Internet-Draft LDAP-based Agent Configuration Schema September 2006 serviceSearchList = serviceID ":" serviceSearchDesc *(";" serviceSearchDesc) serviceSearchDesc = confReferral / searchDescriptor searchDescriptor = [base] ["?" [scopeSyntax] ["?" [filter]]] confReferral = "ref:" distinguishedName base = distinguishedName / relativeBaseName relativeBaseName = 1*(relativeDistinguishedName ",") filter = UTF-8 encoded string If the confReferral, base, relativeBaseName or filter contains the ";" (ASCII 0x3B) "?" (ASCII 0x3F) """ (ASCII 0x22) or "\" (ASCII 0x5C) characters, those characters MUST be escaped (preceded with the "\" character.) Alternately the DN may be surrounded by quotes (ASCII 0x22.) Refer to RFC 4514. If the confReferral, base, relativeBaseName or filter are surrounded by quotes, only the """ character needs to be escaped. Any character that is preceded by the "\" character, which does not need to be escaped results in both "\" character and the character itself. The usage and syntax of the filter string MUST be defined by the DUA service. A suggested syntax would be that as defined by [RFC4515]. If a DUA is performing a search for a particular service, which has a serviceSearchDescriptor defined, the DUA MUST set the base, scope and filter as defined. Each base-scope-filter triple represents a single LDAP search operation. If multiple base-scope-filter triples are provided in the serviceSearchDescriptor, the DUA SHOULD perform multiple search requests and in that case it MUST be in the order specified by the serviceSearchDescriptor. FYI: Service search descriptors do not exactly follow the LDAP URL syntax [RFC4516]. The reasoning for this difference is to separate the host name(s) from the filter. This allows the DUA to have a more flexible solution in choosing its DSA. Default Value: If a serviceSearchDescriptor, or an element their-of, is not defined for a particular service, the DUA SHOULD create the Neal-Joslin, et al. Expires March 5, 2007 [Page 19] Internet-Draft LDAP-based Agent Configuration Schema September 2006 base, scope and filter as follows: base - Same as the defaultSearchBase. scope - Same as the defaultSearchScope. filter - Use defaults as defined by DUAs service. If the defaultSearchBase or defaultSearchScope are not defined, then the DUA service MAY use its own default. Other attribute notes: If a serviceSearchDescriptor exists for a given service, the service MUST use at least one base-scope-filter triple in performing searches. It SHOULD perform multiple searches per service if multiple base-scope-filter triples are defined for that service. The details of how the "filter" is interpreted by each DUA's service is defined by that service. This means the filter is NOT REQUIRED to be a legal LDAP filter [RFC4515]. Furthermore, determining how attribute and objectclass mapping affects that search filter MUST be defined by the service. I.E. The DUA SHOULD specify if the attributes in the filter have assumed to already have been mapped, or if it is expected that attribute mapping (see Section 4.7) would be applied to the filter. In general practice, implementation and usability suggests that attribute and objectclass mapping (Section 4.7 and Section 4.13) SHOULD NOT be applied to the filter defined in the serviceSearchDescriptor. The serviceID is unique to a given service within the scope of any DUA that might use the given profile, and should be defined by that service. Registration of serviceIDs is not addressed by this document. However, as per the guidance at the end of Section 1, when DUA developers define their use of the DUAConfigProfile schema, they will define the serviceIDs used by that DUA. searchGuide and enhancedSearchGuide ([RFC4517]: There are a few reasons why the authors chose not to take advantage of the existing searchGuide and enhancedSearchGuide attributes and relateded syntaxes. While the enhancedSearchGuide met a number of the serviceSearchDescriptor requirements, serviceSearchDescriptor was developed primarially to support associating search operations with services. And Neal-Joslin, et al. Expires March 5, 2007 [Page 20] Internet-Draft LDAP-based Agent Configuration Schema September 2006 that multiple services could be configured using the same profile. This required specifing the serviceID together with the search descriptor information. A few other reasons for not using enhancedSearchGuide include: The need to specify alternate search bases, including the abiltity to specify search bases that are relative to the parent defaultSearchBase. The need to specify alternate profiles using the "ref:" syntax. The ability for individual services to specify their own syntaxes for the format of the search filter. The author's belief that the user community is more familiar with the search filter syntax described by RFC4515, instead of that described by the enhancedSearchGuide syntax. Example: defaultSearchBase: dc=mycompany,dc=com serviceSearchDescriptor: email:ou=people,ou=org1,? one;ou=contractor,?one; ref:cn=profile,dc=mycompany,dc=com In this example, the DUA MUST search in "ou=people,ou=org1,dc=mycompany,dc=com" first. The DUA then SHOULD search in "ou=contractor,dc=mycompany,dc=com", and finally it SHOULD search other locations as specified in the profile described at "cn=profile,dc=mycompany,dc=com". For more examples, see Appendix A. 4.7. Interpreting the attributeMap attribute Interpretation: A DUA SHOULD perform attribute mapping for all LDAP operations performed for a service that has an attributeMap entry. Because attribute mapping is specific to each service within the DUA, a "serviceID" is required as part of the attributeMap syntax. I.E. not all DUA services should necessarily perform the same attribute mapping. Neal-Joslin, et al. Expires March 5, 2007 [Page 21] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Attribute mapping in general is expected be used to map attributes of similar syntaxes as specified by the service supported by the DUA. However, a DUA is NOT REQUIRED to verify syntaxes of mapped attributes. If the DUA does discover that the syntax of the mapped attribute does not match that of the original attribute, the DUA MAY perform translation between the original syntax and the new syntax. When DUAs do support attribute value translation, the method and list of capable translations SHOULD be documented in a description of the DUA service. Syntax: attributeMap = serviceID ":" origAttribute "=" attributes origAttribute = attribute attributes = wattribute *( SP wattribute ) wattribute = WSP newAttribute WSP newAttribute = descr / "*NULL*" attribute = descr Values of the origAttribute are defined by and SHOULD be documented for the DUA service, as a list of known supported attributes. Default Value: By default, attributes that are used by a DUA service are not mapped unless mapped by the attributeMap attributes. The DUA SHOULD NOT map an attribute unless it is explicitly defined by an attributeMap attribute. Other attribute notes: When an attribute is mapped to the special keystring "*NULL*", the DUA SHOULD NOT request that attribute from the DSA, when performing a search or compare request. If the DUA is also capable of performing modification on the DSA, the DUA SHOULD NOT attempt to modify any attribute which has been mapped to "*NULL*". Neal-Joslin, et al. Expires March 5, 2007 [Page 22] Internet-Draft LDAP-based Agent Configuration Schema September 2006 It is assumed the serviceID is unique to a given service within the scope of the DSA. A DUA SHOULD support attribute mapping. If it does, the following additional rules apply: 1. The list of attributes that are allowed to be mapped SHOULD defined by and documented for the service. 2. Any supported translation of mapping from attributes of dissimilar syntax SHOULD also be defined and documented. 3. If an attribute may be mapped to multiple attributes the DSA SHOULD define a syntax or usage statement for how the new attribute value will be constructed. Furthermore, the resulting translated syntax of the combined attributes MUST be the same as the attribute being mapped. 4. A DUA MUST support mapping of attributes using the attribute OID. It SHOULD support attribute mapping based on the attribute name. 5. It is recommended that attribute mapping not be applied to parents of the target entries. 6. Attribute mapping is not recursive. In other words, if an attribute has been mapped to a target attribute, that new target attribute MUST NOT be mapped to a third attribute. 7. A given attribute MUST only be mapped once for a given service. Example: Suppose a DUA is acting on behalf of an email service. By default the "email" service uses the "mail", "cn" and "sn" attributes to discover mail addresses. However, the email service has been deployed in an environment that uses "employeeName" instead of "cn." And also instead of using the "mail" attribute for email addresses, the "email" attribute is used for that purpose. In this case, the attribute "cn" can be mapped to "employeeName," allowing the DUA to perform searches using the "employeeName" attribute as part of the search filter, instead of "cn". And "mail" can be mapped to "email" when attempting to retrieve the email address. This mapping is performed by adding the attributeMap attributes to the Neal-Joslin, et al. Expires March 5, 2007 [Page 23] Internet-Draft LDAP-based Agent Configuration Schema September 2006 configuration profile entry as follows (represented in LDIF[RFC2849]): attributeMap: email:cn=employeeName attributeMap: email:mail=email As described above, the DUA MAY also map a single attribute to multiple attributes. When mapping a single attribute to more than one attribute, the new syntax or usage of the mapped attribute must be intrinsically defined by the DUAs service. attributeMap: email:cn=firstName lastName In the above example, the DUA creates the new value by generating space separated string using the values of the mapped attributes. In this case, a special mapping must be defined so that a proper search filter can be created. For further information on this example, please refer to Appendix A. Another possibility for multiple attribute mapping might come in when constructing returned attributes. For example, perhaps all email addresses are of a guaranteed syntax of "uid@domain". And in this example, the uid and domain are separate attributes in the directory. The email service may define that if the "mail" attribute is mapped to two different attributes, it will construct the email address as a concatenation of the two attributes (uid and domain), placing the "@" character between them. attributeMap: email:mail=uid domain 4.8. Interpreting the searchTimeLimit attribute Interpretation: The searchTimeLimit attribute defines the maximum time, in seconds, that a DUA SHOULD allow to perform a search request. Syntax: Defined by OID 1.3.6.1.4.1.1466.115.121.1.27. [RFC4517] Default Value: If the searchTimeLimit attribute is not defined or is zero, the search time limit SHOULD NOT be enforced by the DUA. Neal-Joslin, et al. Expires March 5, 2007 [Page 24] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Other attribute notes: This time limit only includes the amount of time required to perform the LDAP search operation. If other operations are required, those operations do not need to be considered part of the search time. See bindTimeLimit for the LDAP bind operation. 4.9. Interpreting the bindTimeLimit attribute Interpretation: The bindTimeLimit attribute defines the maximum time, in seconds, that a DUA SHOULD allow to perform an LDAP bind request against each server on the preferredServerList or defaultServerList. Syntax: Defined by OID 1.3.6.1.4.1.1466.115.121.1.27. Default Value: If the bindTimeLimit attribute is not defined or is zero, the bind time limit SHOULD NOT be enforced by the DUA. Other attribute notes: This time limit only includes the amount of time required to perform the LDAP bind operation. If other operations are required, those operations do not need to be considered part of the bind time. See searchTimeLimit for the LDAP search operation. 4.10. Interpreting the followReferrals attribute Interpretation: If set to TRUE, the DUA SHOULD follow any referrals if discovered. If set to FALSE, the DUA MUST NOT follow referrals. Syntax: Defined by OID 1.3.6.1.4.1.1466.115.121.1.7. [RFC4517] Neal-Joslin, et al. Expires March 5, 2007 [Page 25] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Default Value: If the followReferrals attribute is not set or set to an invalid value the default value is TRUE. 4.11. Interpreting the dereferenceAliases attribute Interpretation: If set to TRUE, the DUA SHOULD enable alias dereferencing. If set to FALSE, the DUA MUST NOT enable alias dereferencing. Syntax: Defined by OID 1.3.6.1.4.1.1466.115.121.1.7. Default Value: If the dereferenceAliases attribute is not set or set to an invalid value the default value is TRUE. 4.12. Interpreting the profileTTL attribute Interpretation: The profileTTL attribute defines how often the DUA SHOULD re- load and reconfigure itself using the corresponding configuration profile entry. The value is represented in seconds. Once a DUA reloads the profile entry, it SHOULD re- configure itself with the new values. Syntax: Defined by OID 1.3.6.1.4.1.1466.115.121.1.27. Default Value: If not specified the DUA MAY use its own reconfiguration policy. Other attribute notes: If the profileTTL value is zero, the DUA SHOULD NOT automatically re-load the configuration profile. Neal-Joslin, et al. Expires March 5, 2007 [Page 26] Internet-Draft LDAP-based Agent Configuration Schema September 2006 4.13. Interpreting the objectclassMap attribute Interpretation: A DUA MAY perform objectclass mapping for all LDAP operations performed for a service that has an objectclassMap entry. Because objectclass mapping is specific for each service within the DUA, a "serviceID" is required as part of the objectclassMap syntax. I.E. Not all DUA services should necessarily perform the same objectclass mapping. Objectclass mapping SHOULD be used in conjunction with attribute mapping to map the required schema by the service to an equivalent schema that is available in the directory. Objectclass mapping may or may not be required by a DUA. Often, the objectclass attribute is used in search filters. Section 4.7 recommends that attribute mapping not be applied to the serviceSearchDescriptor. Thus, if the default objectclasses are not used in a DUA deployment, typically only the serviceSearchDescriptor needs to be defined to reflect that mapping. However, when the service search descriptor is not provided, and the default search filter for that service contains the objectclass attribute, that search filter SHOULD be re-defined by objectclass mapping if defined. If a default search filter is not used, it SHOULD be re-defined through the serviceSearchDescriptor. If a serviceSearchDescriptor is defined for a particular service, it SHOULD NOT be re-mapped by either the objectclassMap or attributeMap values. One condition where the objectclassMap SHOULD be used is when the DUA is providing gateway functionality. In this case, the DUA is acting on behalf of another service, which may pass in a search filter itself. In this type of DUA, the DUA may alter the search filter according to the appropriate attributeMap and objectclassMap values. And in this case, it is also assumed that a serviceSearchDescriptor is not defined. Syntax: objectclassMap = serviceID ":" origObjectclass "=" objectclass Neal-Joslin, et al. Expires March 5, 2007 [Page 27] Internet-Draft LDAP-based Agent Configuration Schema September 2006 origObjectclass = objectclass objectclass = keystring Values of the origObjectclass depend on the type of DUA Service using the objectclass mapping feature. Default Value: The DUA MUST NOT remap an objectclass unless it is explicitly defined by an objectclassMap attribute. Other attribute notes: A DUA SHOULD support objectclass mapping. If it does, the DUA MUST support mapping of objectclasses using the objectclass OID. It SHOULD support objectclass mapping based on the objectclass name. It is assumed the serviceID is unique to a given service within the scope of the DSA. Example: Suppose a DUA is acting on behalf of an email service. By default the "email" service uses the "mail", "cn" and "sn" attributes to discover mail addresses in entries created using inetOrgPerson objectclass[RFC2789]. However, the email service has been deployed in an environment that uses entries created using "employee" objectclass. In this case, the attribute "cn" can be mapped to "employeeName", and "inetOrgPerson" can be mapped to "employee", allowing the DUA to perform LDAP operations using the entries that exist in the directory. This mapping is performed by adding attributeMap and objectclassMap attributes to the configuration profile entry as follows (represented in LDIF[RFC2849]): attributeMap: email:cn=employeeName objectclassMap: email:inetOrgPerson=employee 4.14. Interpreting the defaultSearchScope attribute Interpretation: When a DUA needs to search the DSA for information, this attribute provides the "scope" for the search. This parameter can be overridden by the serviceSearchDescriptor attribute. See Section 4.6. Neal-Joslin, et al. Expires March 5, 2007 [Page 28] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Syntax: scopeSyntax = "base" / "one" / "sub" Default Value: The default value for the defaultSearchScope SHOULD be defined by the DUA service. If the default search scope for a service is not defined then the scope SHOULD be for the DUA to perform a subtree search. 4.15. Interpreting the serviceAuthenticationMethod attribute Interpretation: The serviceAuthenticationMethod attribute defines an ordered list of LDAP bind methods to be used when attempting to contact a DSA for a particular service. Interpretation and use of this attribute is the same as Section 4.4, but specific for each service. Syntax: svAuthMethod = serviceID ":" method *(";" method) Note: Although multiple authentication methods may be specified in the syntax, at most one of each type is allowed. Default Value: If the serviceAuthenticationMethod attribute is not provided, the authenticationMethod SHOULD be followed, or its default. Other attribute notes: Determining how the DUA should bind to the DSAs also depends on the additional configuration attributes, credentialLevel, serviceCredentialLevel and bindTimeLimit. Please review Section 5 for details on how to properly bind to a DSA. Example: serviceAuthenticationMethod: email:tls:simple;sasl/DIGEST-MD5 4.16. Interpreting the serviceCredentialLevel attribute Neal-Joslin, et al. Expires March 5, 2007 [Page 29] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Interpretation: The serviceCredentialLevel attribute defines what type(s) of credential(s) the DUA SHOULD use when contacting the DSA for a particular service. Interpretation and used of this attribute are the same as Section 4.5. Syntax: svCredentialLevel = serviceID ":" level *(SP level) Refer to implementation notes in Section 5 for additional syntax requirements for the credentialLevel attribute. Note: Although multiple credential levels may be specified in the syntax, at most one of each type is allowed. Default Value: If the serviceCredentialLevel attribute is not defined, the DUA MUST examine the credentialLevel attribute, or follow its default if not provided. Other attribute notes: Determining how the DUA should bind to the DSAs also depends on the additional configuration attributes, serviceAuthenticationMethod, authenticationMethod and bindTimeLimit. Please review Section 5 for details on how to properly bind to a DSA. Example: serviceCredentialLevel: email:proxy anonymous Neal-Joslin, et al. Expires March 5, 2007 [Page 30] Internet-Draft LDAP-based Agent Configuration Schema September 2006 5. Binding to the Directory Server The DUA SHOULD use the following algorithm when binding to the server: for (clevel in credLevel) [see note 1] if (clevel is "anonymous") for (host in hostnames) [see note 2] if (server is responding) return success return failure else for (amethod in authMethod) [see note 3] if (amethod is none) for (host in hostnames) if (server is responding) return success return failure else for (host in hostnames) authenticate using amethod and clevel if (authentication passed) return success return failure Note 1: The credLevel is a list of credential levels as defined in serviceCredentialLevel (Section 4.16) for a given service. If the serviceCredentialLevel is not defined, the DUA MUST examine the credentialLevel attribute. Note 2: hostnames is the list of servers to contact as defined in Section 4.1 and Section 4.2. Note 3: The authMethod is a list of authentication methods as defined in serviceAuthenticationMethod (Section 4.15) for a given service. If the serviceAuthenticationMethod is not defined, the DUA MUST examine the authenticationMethod attribute. Neal-Joslin, et al. Expires March 5, 2007 [Page 31] Internet-Draft LDAP-based Agent Configuration Schema September 2006 6. Security Considerations The profile entries MUST be protected against unauthorized modification. Each service needs to consider implications of providing its service configuration as part of this profile and limit access to the profile entries accordingly. The management of the authentication credentials for the DUA is outside the scope of this document and needs to be handled by the DUA. Since the DUA needs to know how to properly bind to the directory server, the access control configuration of the DSA MUST assure that the DSA can view all the elements of the DUAConfigProfile attributes. For example, if the credentialLevel attribute contains "Self" but the DSA is unable to access the credentialLevel attribute, the DUA will instead attempt an anonymous connection to the directory server. The algorithm described by Section 5 also has security considerations. Altering that design will alter the security aspects of the configuration profile. When DUAs connect to multiple directory servers it is for the purpose to support potential high-availability and/or performance requirements. As such, each directory server specified in the preferredServer list and defaultServerList MUST contain the same (replicated) data and be part of the same security domain. This means the directory supported authentication methods, authentication polices and directory data access control policies are exactly the same across all the defined directory servers. Neal-Joslin, et al. Expires March 5, 2007 [Page 32] Internet-Draft LDAP-based Agent Configuration Schema September 2006 7. Acknowledgments There were several additional authors of this document. However we chose to represent only one author per company in the heading. From Sun we also would like to acknowledge Roberto Tam for his design work on Sun's first LDAP name service product and his input for this document. From Hewlett-Packard we'd like to acknowledge Dave Binder for his work architecting Hewlett-Packard's LDAP name service product as well as his design guidance on this document. We'd also like to acknowledge Grace Lu from HP, for her input and implementation of HP's configuration profile manager code. Neal-Joslin, et al. Expires March 5, 2007 [Page 33] Internet-Draft LDAP-based Agent Configuration Schema September 2006 8. IANA Considerations This document defines new LDAP attributes and objectclass for object identifier descriptors. As specified by section 3.4 and required by section 4 of [RFC4520] this document registers new descriptors as follows per the Expert Review. 8.1. Registration of Object Classes Subject: Request for LDAP Descriptor Registration Descriptor (short name): DUAConfigProfile Object Identifier: 1.3.6.1.4.1.11.1.3.1.2.5 Person & email address to contact for further information: See "Author/Change Controller" Usage: object class Specification: draft-joslin-config-schema-17.txt Author/Change Controller: Bob Neal-Joslin Hewlett-Packard Company 19420 Homestead RD Cupertino, CA 95014 USA Phone: +1 408-447-3044 EMail: bob_joslin@hp.com Comments: See also associated request for the defaultServerList, defaultSearchBase, preferredServerList, searchTimeLimit, bindTimeLimit, followReferrals, authenticationMethod, profileTTL, attributeMap, credentialLevel, objectclassMap, defaultSearchScope, serviceCredentialLevel, serviceSearchDescriptor, serviceAuthenticationMethod and dereferenceAliases attribute types. 8.2. Registration of Attribute Types Subject: Request for LDAP Descriptor Registration Neal-Joslin, et al. Expires March 5, 2007 [Page 34] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Descriptor (short name): See comments Object Identifier: See comments Person & email address to contact for further information: See "Author/Change Controller" Usage: attribute type Specification: draft-joslin-config-schema-17.txt Author/Change Controller: Bob Neal-Joslin Hewlett-Packard Company 19420 Homestead RD Cupertino, CA 95014 USA Phone: +1 408-447-3044 EMail: bob_joslin@hp.com Comments: The following object identifiers and associated attribute types are being registered. OID Attribute Type -------------------------- --------------------------- 1.3.6.1.4.1.11.1.3.1.1.0 defaultServerList 1.3.6.1.4.1.11.1.3.1.1.1 defaultSearchBase 1.3.6.1.4.1.11.1.3.1.1.2 preferredServerList 1.3.6.1.4.1.11.1.3.1.1.3 searchTimeLimit 1.3.6.1.4.1.11.1.3.1.1.4 bindTimeLimit 1.3.6.1.4.1.11.1.3.1.1.5 followReferrals 1.3.6.1.4.1.11.1.3.1.1.6 authenticationMethod 1.3.6.1.4.1.11.1.3.1.1.7 profileTTL 1.3.6.1.4.1.11.1.3.1.1.9 attributeMap 1.3.6.1.4.1.11.1.3.1.1.10 credentialLevel 1.3.6.1.4.1.11.1.3.1.1.11 objectclassMap 1.3.6.1.4.1.11.1.3.1.1.12 defaultSearchScope 1.3.6.1.4.1.11.1.3.1.1.13 serviceCredentialLevel 1.3.6.1.4.1.11.1.3.1.1.14 serviceSearchDescriptor 1.3.6.1.4.1.11.1.3.1.1.15 serviceAuthenticationMethod 1.3.6.1.4.1.11.1.3.1.1.16 dereferenceAliases Please also see associated registration request for the DUAConfigProfile object class. Neal-Joslin, et al. Expires March 5, 2007 [Page 35] Internet-Draft LDAP-based Agent Configuration Schema September 2006 9. References 9.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC4234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", RFC 4234, October 2005. [RFC4510] Zeilenga, K., "Lightweight Directory Access Protocol (LDAP): Technical Specification Road Map", RFC 4510, June 2006. [RFC4511] Sermersheim, J., "Lightweight Directory Access Protocol (LDAP): The Protocol", RFC 4511, June 2006. [RFC4512] Zeilenga, K., "Lightweight Directory Access Protocol (LDAP): Directory Information Models", RFC 4512, June 2006. [RFC4514] Zeilenga, K., "Lightweight Directory Access Protocol (LDAP): String Representation of Distinguished Names", RFC 4514, June 2006. [RFC4516] Smith, M. and T. Howes, "Lightweight Directory Access Protocol (LDAP): Uniform Resource Locator", RFC 4516, June 2006. [RFC4517] Legg, S., "Lightweight Directory Access Protocol (LDAP): Syntaxes and Matching Rules", RFC 4517, June 2006. [RFC4519] Sciberras, A., "Lightweight Directory Access Protocol (LDAP): Schema for User Applications", RFC 4519, June 2006. [SASLMECH] Internet Assigned Numbers Authority, "SIMPLE AUTHENTICATION AND SECURITY LAYER (SASL) MECHANISMS, http://www.iana.org/assignments/sasl-mechanisms", July 2006. Neal-Joslin, et al. Expires March 5, 2007 [Page 36] Internet-Draft LDAP-based Agent Configuration Schema September 2006 9.2. Informative References [MSSFU] Microsoft Corporation, "Windows Services for Unix 3.5, http://www.microsoft.com/windows/sfu/default.asp". [RFC2307] Howard, L., "An Approach for Using LDAP as a Network Information Service", RFC 2307, March 1998. [RFC2789] Freed, N. and S. Kille, "Mail Monitoring MIB", RFC 2789, March 2000. [RFC2831] Leach, P. and C. Newman, "Using Digest Authentication as a SASL Mechanism", RFC 2831, May 2000. [RFC2849] Good, G., "The LDAP Data Interchange Format (LDIF) - Technical Specification", RFC 2849, June 2000. [RFC4422] Melnikov, A. and K. Zeilenga, "Simple Authentication and Security Layer (SASL)", RFC 4422, June 2006. [RFC4515] Smith, M. and T. Howes, "Lightweight Directory Access Protocol (LDAP): String Representation of Search Filters", RFC 4515, June 2006. [RFC4520] Zeilenga, K., "Internet Assigned Numbers Authority (IANA) Considerations for the Lightweight Directory Access Protocol (LDAP)", BCP 64, RFC 4520, June 2006. Neal-Joslin, et al. Expires March 5, 2007 [Page 37] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Appendix A. Examples In this section we will describe a fictional DUA which provides one service, called the "email" service. This service would be similar to an email client that uses an LDAP directory to discover email addresses based on a textual representation of the recipient's colloquial name. This email service is defined by default to expect that users with email addresses will be of the "inetOrgPerson" objectclass type [RFC2789]. And by default, the "email" service expects the colloquial name to be stored in the "cn" attribute, while it expects the email address to be stored in the "mail" attribute (as one would expect as defined by the inetOrgPerson objectclass.) As a special feature, the "email" service will perform a special type of attribute mapping, when performing searches. If the "cn" attribute has been mapped to two or more attributes, the "email" service will parse the requested search string and map each white- space separated token into the mapped attributes, respectively. The default search filter for the "email" service is "(objectclass=inetOrgPerson)". The email service also defines that when it performs a name to address discovery, it will wrap the search filter inside a complex search filter as follows: (&()(cn~=) or if "cn" has been mapped to multiple attributes, that wrapping would appear as follows: (&()(attr1~=)(attr2~=)...) The below examples show how the "email" service builds it search requests, based on the defined profile. In all cases, the defaultSearchBase is "o=airius.com" and the defaultSearchScope is undefined. In addition, for all examples, we assume that the "email" service has been requested to discover the email address for "Jane Hernandez." Neal-Joslin, et al. Expires March 5, 2007 [Page 38] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Example 1: serviceSearchDescriptor: email:"ou=marketing," base: ou=marketing,o=airius.com scope: sub filter: (&(objectclass=inetOrgPerson)(cn~=Jane Hernandez)) Example 2: serviceSearchDescriptor: email:"ou=marketing,"?one? (&(objectclass=inetOrgPerson)(c=us)) attributeMap: email:cn=2.5.4.42 sn Note: 2.5.4.42 is the OID that represents the "givenName" attribute. In this example, the email service performs parsing as described above to generate a complex search filter. The above example results in one search. base: ou=marketing,o=airius.com scope: one filter: (&(&(objectclass=inetOrgPerson)(c=us)) (2.5.4.42~=Jane)(sn~=Hernandez)) Example 3: serviceSearchDescriptor: email:ou=marketing,"?base attributeMap: email:cn=name This example is invalid, because either the quote should have been escaped, or there should have been a leading quote. Example 4: serviceSearchDescriptor: email:ou=\\mar\\\\keting,\\"?base attributeMap: email:cn=name base: ou=\\mar\\keting," scope: base filter (&(objectclass=inetOrgPerson)(name~=Jane Hernandez)) Example 5: serviceSearchDescriptor: email:ou="marketing",o=supercom Neal-Joslin, et al. Expires March 5, 2007 [Page 39] Internet-Draft LDAP-based Agent Configuration Schema September 2006 This example is invalid, since the quote was not a leading quote, and thus should have been escaped. Example 6: serviceSearchDescriptor: email:??(&(objectclass=person) (ou=Org1 \\\\(temporary\\\\))) base: o=airius.com scope: sub filter: (&((&(objectclass=person)(ou=Org1 \\(Temporary\\))) (cn~=Jane Henderson))) Example 7: serviceSearchDescriptor: email:"ou=funny?org," base: ou=funny?org,o=airius.com scope: sub filter (&(objectclass=inetOrgPerson)(cn~=Jane Hernandez)) Neal-Joslin, et al. Expires March 5, 2007 [Page 40] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Authors' Addresses Bob Neal-Joslin (editor) Hewlett-Packard Company 19420 Homestead RD M/S 4029 Cupertino, CA 95014 US Phone: +1 408 447 3044 Email: bob_joslin@hp.com URI: http://www.hp.com Luke Howard PADL Software Pty. Ltd. PO Box 59 Central Park, Vic 3145 AU Email: lukeh@padl.com URI: http://www.padl.com Morteza Ansari Infoblox 475 Potrero Avenue Sunnyvale, CA 94085 US Phone: +1 408 716 4300 Email: morteza@infoblox.com Neal-Joslin, et al. Expires March 5, 2007 [Page 41] Internet-Draft LDAP-based Agent Configuration Schema September 2006 Intellectual Property Statement The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Copyright Statement Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society. Neal-Joslin, et al. Expires March 5, 2007 [Page 42]