HTTP/1.1 200 OK Date: Tue, 09 Apr 2002 08:51:48 GMT Server: Apache/1.3.20 (Unix) Last-Modified: Fri, 17 Jul 1998 01:33:00 GMT ETag: "323d2d-b5dc-35aea9cc" Accept-Ranges: bytes Content-Length: 46556 Connection: close Content-Type: text/plain INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 Definitions of Managed Objects for the DS0 and DS0 Bundle Interface Type Thu Jul 16 10:14:39 EDT 1998 draft-ietf-trunkmib-ds0-mib-07.txt David Fowler (editor) Newbridge Networks davef@newbridge.com Status of this Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as ``work in progress.'' To learn the current status of any Internet-Draft, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.ietf.org (US East Coast), nic.nordu.net (Europe), ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific Rim). Abstract This memo defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing DS0 and DS0 Bundle interfaces. This document is a companion document with Definitions of Managed Objects for the DS1/E1/DS2/E2, DS3/E3 and SONET/SDH Interface Types, RFC XXXX [6], RFC XXXX [7] and RFC XXXX [8]. This memo specifies a MIB module in a manner that is both compliant to the SNMPv2 SMI, and semantically identical to the peer SNMPv1 definitions. Expires January 1999 [Page 1] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 This memo does not specify a standard for the Internet community. 1. The SNMPv2 Network Management Framework The SNMPv2 Network Management Framework consists of three major components. They are: o the SMI, described in RFC 1902 [1] - the mechanisms used for describing and naming objects for the purpose of management. o the MIB-II, STD 17, RFC 1213 [2] - the core set of managed objects for the Internet suite of protocols. o the protocol, STD 15, RFC 1157 [3] and/or RFC 1905 [4], - the protocol for accessing managed objects. The Framework permits new objects to be defined for the purpose of experimentation and evaluation. Expires January 1999 [Page 2] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 2. Objects Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to also refer to the object type. Expires January 1999 [Page 3] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 3. Overview These objects are used when the particular media being used to realize an interface is a DS0 interface. At present, this applies to these values of the ifType variable in the Internet-standard MIB: ds0 (81) ds0Bundle (82) 3.1. BONDing Terminology Please reference The BONDing Spec [9] for definitions of terms used to describe bonding modes. 3.2. Use of ifTable for DS0 Layer The following items are defined in RFC 2233 [5]. Only the ifGeneralInformationGroup and ifCounterDiscontinuityGroup need to be supported. ifTable Object Use for DS0 Layer ====================================================================== ifIndex Interface index. ifDescr See interfaces MIB [5]. ifType ds0(81) or ds0Bundle(82). ifSpeed 64000 for ds0 (regardless of the setting of robbed bit signalling) or N*64000 for ds0Bundle. ifPhysAddress The value of the Circuit Identifier. If no Circuit Identifier has been assigned this object should have an octet string with zero length. ifAdminStatus See interfaces MIB [5]. ifOperStatus See interfaces MIB [5]. Expires January 1999 [Page 4] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 ifLastChange See interfaces MIB [5]. ifName See interfaces MIB [5]. ifLinkUpDownTrapEnable Set to disabled(2). Supports read-only access. ifHighSpeed Set to rounded ifSpeed/1000000. ifConnectorPresent Set to false(2). 3.3. Using ifStackTable This section describes by example how to use ifStackTable to represent the relationship of ds0 and ds0Bundles with ds1 interfaces. Implementors of the stack table for ds0 and ds0Bundle interfaces should look at the appropriate RFC for the service being stacked on ds0s and ds0Bundles. Examples given below are for illustration purposes only. Example: A Frame Relay Service is being carried on 4 ds0s of a ds1. +---------------------+ | Frame Relay Service | +---------------------+ | +---------------------+ | ds0Bundle | +---------------------+ | | | | +---+ +---+ +---+ +---+ |ds0| |ds0| |ds0| |ds0| +---+ +---+ +---+ +---+ | | | | +---------------------+ | ds1 | +---------------------+ The assignment of the index values could for example be: ifIndex Description 1 FrameRelayService (type 44) 2 ds0Bundle (type 82) 3 ds0 #1 (type 81) Expires January 1999 [Page 5] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 4 ds0 #2 (type 81) 5 ds0 #3 (type 81) 6 ds0 #4 (type 81) 7 ds1 (type 18) Expires January 1999 [Page 6] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 The ifStackTable is then used to show the relationships between the various interfaces. ifStackTable Entries HigherLayer LowerLayer 0 1 1 2 2 3 2 4 2 5 2 6 3 7 4 7 5 7 6 7 7 0 In the case where the frameRelayService is using a single ds0, then the ds0Bundle is not required. +---------------------+ | Frame Relay Service | +---------------------+ | +---+ |ds0| +---+ | +---------------------+ | ds1 | +---------------------+ The assignment of the index values could for example be: ifIndex Description 1 FrameRelayService (type 44) 2 ds0 (type 81) 3 ds1 (type 18) Expires January 1999 [Page 7] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 The ifStackTable is then used to show the relationships between the various interfaces. ifStackTable Entries HigherLayer LowerLayer 0 1 1 2 2 3 3 0 3.3.1. Usage of Channelization for DS3, DS1, DS0 An example is given here to explain the channelization objects in the DS3, DS1, and DS0 MIBs to help the implementor use the objects correctly. Treatment of E3 and E1 would be similar, with the number of DS0s being different depending on the framing of the E1. Timeslot 16 is not created for framing types that do not pass data over it. Assume that a DS3 (with ifIndex 1) is channelized into DS1s (without DS2s). The object dsx3Channelization is set to enabledDs1. There will be 28 DS1s in the ifTable. Assume the entries in the ifTable for the DS1s are created in channel order and the ifIndex values are 2 through 29. In the DS1 MIB, there will be an entry in the dsx1ChanMappingTable for each ds1. The entries will be as follows: dsx1ChanMappingTable Entries ifIndex dsx1Ds1ChannelNumber dsx1ChanMappedIfIndex 1 1 2 1 2 3 ...... 1 28 29 In addition, the DS1s are channelized into DS0s. The object dsx1Channelization is set to enabledDs0 for each DS1. When this object is set to this value, 24 DS0s are created by the agent. There will be 24 DS0s in the ifTable for each DS1. If the dsx1Channelization is set to disabled, the 24 DS0s are destroyed. Assume the entries in the ifTable are created in channel order and the ifIndex values for the DS0s in the first DS1 are 30 through 53. In the DS0 MIB, there will be an entry in the dsx0ChanMappingTable for each DS0. The entries will be as follows: Expires January 1999 [Page 8] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 dsx0ChanMappingTable Entries ifIndex dsx0Ds0ChannelNumber dsx0ChanMappedIfIndex 2 1 30 2 2 31 ...... 2 24 53 3.3.2. Usage of ifIndex Mapping for DS0Bundle An example is given here to explain the ifIndex mapping objects in the DS0Bundle MIB to help the implementor use the objects correctly. Assume that a DS1 (with ifIndex 1) is channelized into DS0s. There will be 24 DS0s in the ifTable. Assume the entries in the ifTable for the DS0s are created in channel order and the ifIndex values are 2 through 25. Now, assume that there are two bundles on the DS1. The first one uses channels 1 and 2. The second uses channels 3 and 4. There will be two ifTable entries for these bundles, with values of 26 and 27 for ifIndex. There will be an entry in the dsx0BundleTable for each bundle. The entries will be as follows: dsx0BundleTable Entries dsx0BundleIndex dsx0BundleIfIndex 1 26 2 27 There will be an entry in the dsx0ConfigTable for each DS0. The entries will be as follows: dsx0ConfigTable Entries ifIndex dsx0Ds0ChannelNumber dsx0Ds0BundleMappedIfIndex 2 1 26 3 2 26 4 3 27 5 4 27 6 5 0 7 6 0 ...... 25 24 0 Expires January 1999 [Page 9] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 4. Overview of the MIB This document contains 2 MIB modules, the DS0 MIB and the DS0Bundle MIB. 4.1. DS0 MIB The DS0 MIB is used to represent individual DS0s in a DS1 or E1. Variables in this MIB would be created for each DS0 in the ifTable. This MIB contains the following group: The DS0 Config Group - This group contains configuration information about a particular DS0. 4.2. DS0Bundle MIB The DS0Bundle MIB is used to represent collections of DS0s that are used together to carry data within a DS1/E1 at speeds greater than that of a single DS0. DS0Bundles are created on top of DS0s and are represented that way in the ifStackTable. This MIB contains the following groups: The DS0 Bundle Group - This group contains objects used for creating new ds0Bundles. This group is mandatory. The DS0 Bonding Group - This group contains information about bonding for a ds0Bundle, if bonding is enabled. This group is optional. Expires January 1999 [Page 10] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 5. Object Definitions for DS0 DS0-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, transmission FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, TruthValue FROM SNMPv2-TC ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB; -- This is the MIB module for the DS0 Interface objects. ds0 MODULE-IDENTITY LAST-UPDATED "9807161630Z" ORGANIZATION "IETF Trunk MIB Working Group" CONTACT-INFO " David Fowler Postal: Newbridge Networks Corporation 600 March Road Kanata, Ontario, Canada K2K 2E6 Tel: +1 613 591 3600 Fax: +1 613 599 3619 E-mail: davef@newbridge.com" DESCRIPTION "The MIB module to describe DS0 interfaces objects." REVISION "9805242010Z" DESCRIPTION "Initial version of the DS0-MIB." ::= { transmission 81 } Expires January 1999 [Page 11] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 -- The DS0 Config Group -- Implementation of this group is mandatory for all -- systems that use a DS0 Interface. -- The DS0 Config Group consists of two tables: -- DS0 Configuration Table -- DS0 Channel Mapping Table -- The DS0 Configuration Table dsx0ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx0ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS0 Configuration table." ::= { ds0 1 } dsx0ConfigEntry OBJECT-TYPE SYNTAX Dsx0ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface." INDEX { ifIndex } ::= { dsx0ConfigTable 1 } Dsx0ConfigEntry ::= SEQUENCE { dsx0Ds0ChannelNumber INTEGER, dsx0RobbedBitSignalling TruthValue, dsx0CircuitIdentifier DisplayString, dsx0IdleCode INTEGER, dsx0SeizedCode INTEGER, dsx0ReceivedCode INTEGER, dsx0TransmitCodesEnable TruthValue, dsx0Ds0BundleMappedIfIndex InterfaceIndexOrZero } dsx0Ds0ChannelNumber OBJECT-TYPE SYNTAX INTEGER(0..31) MAX-ACCESS read-only STATUS current Expires January 1999 [Page 12] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 DESCRIPTION "This object indicates the channel number of the ds0 on its DS1/E1." ::= { dsx0ConfigEntry 1 } dsx0RobbedBitSignalling OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if Robbed Bit Signalling is turned on or off for a given ds0. This only applies to DS0s on a DS1 link. For E1 links the value is always off (false)." ::= { dsx0ConfigEntry 2 } dsx0CircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." ::= { dsx0ConfigEntry 3 } dsx0IdleCode OBJECT-TYPE SYNTAX INTEGER(0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the code transmitted in the ABCD bits when the ds0 is not connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bit" ::= { dsx0ConfigEntry 4 } dsx0SeizedCode OBJECT-TYPE SYNTAX INTEGER(0..15) MAX-ACCESS read-write STATUS current Expires January 1999 [Page 13] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 DESCRIPTION "This object contains the code transmitted in the ABCD bits when the ds0 is connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bit" ::= { dsx0ConfigEntry 5 } dsx0ReceivedCode OBJECT-TYPE SYNTAX INTEGER(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the code being received in the ABCD bits. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bit" ::= { dsx0ConfigEntry 6 } dsx0TransmitCodesEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines if the idle and seized codes are transmitted. If the value of this object is true then the codes are transmitted." ::= { dsx0ConfigEntry 7 } dsx0Ds0BundleMappedIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ifIndex value assigned by the agent for the ds0Bundle(82) ifEntry to which the given ds0(81) ifEntry may belong. If the given ds0(81) ifEntry does not belong to Expires January 1999 [Page 14] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 any ds0Bundle(82) ifEntry, then this object has a value of zero. While this object provides information that can also be found in the ifStackTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the possibly non-existent ds0Bundle(82) ifEntry that may be stacked above the given ds0(81) ifTable entry." ::= { dsx0ConfigEntry 8 } -- The DS0 Channel Mapping Table dsx0ChanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx0ChanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS0 Channel Mapping table. This table maps a DS0 channel number on a particular DS1/E1 into an ifIndex." ::= { ds0 3 } dsx0ChanMappingEntry OBJECT-TYPE SYNTAX Dsx0ChanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DS0 Channel Mapping table. There is an entry in this table corresponding to each ds0 ifEntry within any interface that is channelized to the individual ds0 ifEntry level. This table is intended to facilitate mapping from channelized interface / channel number to DS0 ifEntry. (e.g. mapping (DS1 ifIndex, DS0 Channel Number) -> ifIndex) While this table provides information that can also be found in the ifStackTable and dsx0ConfigTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the various constituent ds0 ifTable entries, and testing various Expires January 1999 [Page 15] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 dsx0ConfigTable entries to check for the entry with the applicable DS0 channel number." INDEX { ifIndex, dsx0Ds0ChannelNumber } ::= { dsx0ChanMappingTable 1 } Dsx0ChanMappingEntry ::= SEQUENCE { dsx0ChanMappedIfIndex InterfaceIndex } dsx0ChanMappedIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ifIndex value assigned by the agent for the individual ds0 ifEntry that corresponds to the given DS0 channel number (specified by the INDEX element dsx0Ds0ChannelNumber) of the given channelized interface (specified by INDEX element ifIndex)." ::= { dsx0ChanMappingEntry 1 } -- conformance information ds0Conformance OBJECT IDENTIFIER ::= { ds0 2 } ds0Groups OBJECT IDENTIFIER ::= { ds0Conformance 1 } ds0Compliances OBJECT IDENTIFIER ::= { ds0Conformance 2 } -- compliance statements ds0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DS0 interfaces." MODULE -- this module MANDATORY-GROUPS { ds0ConfigGroup } OBJECT dsx0RobbedBitSignalling MIN-ACCESS read-only DESCRIPTION "The ability to set RBS is not required." Expires January 1999 [Page 16] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 OBJECT dsx0CircuitIdentifier MIN-ACCESS read-only DESCRIPTION "The ability to set the circuit identifier is not required." OBJECT dsx0IdleCode MIN-ACCESS read-only DESCRIPTION "The ability to set the idle code is not required." OBJECT dsx0SeizedCode MIN-ACCESS read-only DESCRIPTION "The ability to set the seized code is not required." OBJECT dsx0TransmitCodesEnable MIN-ACCESS read-only DESCRIPTION "The ability to enable and disable the transmitting of idle and seized codes is not required." ::= { ds0Compliances 1 } -- units of conformance ds0ConfigGroup OBJECT-GROUP OBJECTS { dsx0Ds0ChannelNumber, dsx0RobbedBitSignalling, dsx0CircuitIdentifier, dsx0IdleCode, dsx0SeizedCode, dsx0ReceivedCode, dsx0TransmitCodesEnable, dsx0Ds0BundleMappedIfIndex, dsx0ChanMappedIfIndex } STATUS current DESCRIPTION "A collection of objects providing configuration information applicable to all DS0 interfaces." ::= { ds0Groups 1 } Expires January 1999 [Page 17] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 END Expires January 1999 [Page 18] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 6. Object Definitions for DS0 Bundle DS0BUNDLE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, transmission FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, RowStatus, TestAndIncr FROM SNMPv2-TC ifIndex, InterfaceIndex FROM IF-MIB; -- This is the MIB module for the DS0Bundle Interface -- objects. ds0Bundle MODULE-IDENTITY LAST-UPDATED "9807161630Z" ORGANIZATION "IETF Trunk MIB Working Group" CONTACT-INFO " David Fowler Postal: Newbridge Networks Corporation 600 March Road Kanata, Ontario, Canada K2K 2E6 Tel: +1 613 591 3600 Fax: +1 613 599 3619 E-mail: davef@newbridge.com" DESCRIPTION "The MIB module to describe DS0 Bundle interfaces objects." REVISION "9805242010Z" DESCRIPTION "Initial version of the DS0BUNDLE-MIB." ::= { transmission 82 } Expires January 1999 [Page 19] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 -- -- The DS0 Bundle Config Group -- -- Implementation of this group is mandatory for all -- systems that use a DS0Bundle Interface. -- -- The DS0 Bundle Config Group consists of one table: -- DS0 Bundle Table -- The DS0 Bundle Table dsx0BundleNextIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assist the manager in selecting a value for dsx0BundleIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC 1903) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for dsx0BundleNextIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (dsx0BundleNextIndex.0) SET (dsx0BundleNextIndex.0=index) if (set failed) done = false else SET(dsx0BundleRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling" ::= { ds0Bundle 2 } dsx0BundleTable OBJECT-TYPE Expires January 1999 [Page 20] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 SYNTAX SEQUENCE OF Dsx0BundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is an row in this table for each ds0Bundle in the system. This table can be used to (indirectly) create rows in the ifTable with ifType = 'ds0Bundle(82)'." ::= { ds0Bundle 3 } dsx0BundleEntry OBJECT-TYPE SYNTAX Dsx0BundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in entry in this table for each ds0Bundle interface." INDEX { dsx0BundleIndex } ::= { dsx0BundleTable 1 } Dsx0BundleEntry ::= SEQUENCE { dsx0BundleIndex INTEGER, dsx0BundleIfIndex InterfaceIndex, dsx0BundleCircuitIdentifier DisplayString, dsx0BundleRowStatus RowStatus } dsx0BundleIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier for a ds0Bundle. This is not the same value as ifIndex. This table is not indexed by ifIndex because the manager has to choose the index in a createable row and the agent must be allowed to select ifIndex values." ::= { dsx0BundleEntry 1 } dsx0BundleIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION Expires January 1999 [Page 21] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 "The ifIndex value the agent selected for the (new) ds0Bundle interface." ::= { dsx0BundleEntry 2 } dsx0BundleCircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." ::= { dsx0BundleEntry 3 } dsx0BundleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete rows in this table." ::= { dsx0BundleEntry 4 } -- The DS0 Bonding Group -- Implementation of this group is optional for all -- systems that use a DS0Bundle Interface. -- The DS0 Bonding Group consists of one table: -- DS0 Bonding Table -- The DS0 Bonding Table dsx0BondingTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx0BondingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS0 Bonding table." ::= { ds0Bundle 1 } dsx0BondingEntry OBJECT-TYPE SYNTAX Dsx0BondingEntry MAX-ACCESS not-accessible STATUS current Expires January 1999 [Page 22] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 DESCRIPTION "An entry in the DS0 Bonding table. There is a row in this table for each DS0Bundle interface." INDEX { ifIndex } ::= { dsx0BondingTable 1 } Dsx0BondingEntry ::= SEQUENCE { dsx0BondMode INTEGER, dsx0BondStatus INTEGER, dsx0BondRowStatus RowStatus } dsx0BondMode OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), mode0(3), mode1(4), mode2(5), mode3(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates which BONDing mode is used, if any, for a ds0Bundle. Mode0 provides parameter and number exchange with no synchronization. Mode 1 provides parameter and number exchange. Mode 1 also provides synchronization during initialization but does not include inband monitoring. Mode 2 provides all of the above plus inband monitoring. Mode 2 also steals 1/64th of the bandwidth of each channel (thus not supporting n x 56/64 kbit/s data channels for most values of n). Mode 3 provides all of the above, but also provides n x 56/64 kbit/s data channels. Most common implementations of Mode 3 add an extra channel to support the inband monitoring overhead. ModeNone should be used when the interface is not performing bandwidth-on-demand." ::= { dsx0BondingEntry 1 } dsx0BondStatus OBJECT-TYPE SYNTAX INTEGER { Expires January 1999 [Page 23] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 idle(1), callSetup(2), dataTransfer(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the bonding call using this ds0Bundle. idle(1) should be used when the bonding mode is set to none(1)." ::= { dsx0BondingEntry 2 } dsx0BondRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create new rows in this table, modify existing rows, and to delete existing rows." ::= { dsx0BondingEntry 3 } -- conformance information ds0BundleConformance OBJECT IDENTIFIER ::= { ds0Bundle 4 } ds0BundleGroups OBJECT IDENTIFIER ::= { ds0BundleConformance 1 } ds0BundleCompliances OBJECT IDENTIFIER ::= { ds0BundleConformance 2 } -- compliance statements ds0BundleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DS0Bundle interfaces." MODULE -- this module Expires January 1999 [Page 24] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 MANDATORY-GROUPS {ds0BundleConfigGroup } GROUP ds0BondingGroup DESCRIPTION "Implementation of this group is optional for all systems that attach to a DS0Bundle Interface." OBJECT dsx0BundleRowStatus SYNTAX INTEGER { active(1), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object, and only three of the six enumerated values for the RowStatus textual convention need be supported. Only supporting createAndGo for a creation process prevents the manager from creating an inactive row in the ds0BundleTable. Inactive rows in the ds0BundleTable do not make sense." OBJECT dsx0BundleCircuitIdentifier MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object." ::= { ds0BundleCompliances 1 } -- units of conformance ds0BondingGroup OBJECT-GROUP OBJECTS { dsx0BondMode, dsx0BondStatus, dsx0BondRowStatus } STATUS current DESCRIPTION "A collection of objects providing configuration information applicable to all DS0 interfaces." ::= { ds0BundleGroups 1 } Expires January 1999 [Page 25] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 ds0BundleConfigGroup OBJECT-GROUP OBJECTS { dsx0BundleNextIndex, dsx0BundleIfIndex, dsx0BundleCircuitIdentifier, dsx0BundleRowStatus } STATUS current DESCRIPTION "A collection of objects providing the ability to create a new ds0Bundle in the ifTable as well as configuration information about the ds0Bundle." ::= { ds0BundleGroups 2 } END 7. Acknowledgments This document was produced by the Trunk MIB Working Group: Expires January 1999 [Page 26] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 8. References [1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure of Management Information for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1902, January 1996. [2] McCloghrie, K., and M. Rose, Editors, "Management Information Base for Network Management of TCP/IP-based internets: MIB-II", STD 17, RFC 1213, Hughes LAN Systems, Performance Systems International, March 1991. [3] Case, J., Fedor, M., Schoffstall, M., and J. Davin. " A Simple Network Management Protocol (SNMP)", STD 15, RFC 1157, SNMP Research, Performance Systems International, MIT Lab for Computer Science, May 1990. [4] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. [5] McCloghrie, K. and F. Kastenholz, "Evolution of the Interfaces Group of MIB-II", RFC 2233, Cisco, FTP Software, November 1997. [6] Fowler, D., "Definitions of Managed Objects for the DS1, E1, DS2 and E2 Interface Types", draft-ietf-trunkmib-ds1-mib-08.txt, Newbridge Networks, February 1998. [7] Fowler, D., "Definitions of Managed Objects for the DS3/E3 Interface Type", draft-ietf-trunkmib-ds3-mib-08.txt, Newbridge Networks, February 1998. [8] Brown, T., and Tesink, K., "Definitions of Managed Objects for the SONET/SDH Interface Type", draft-ietf-atommib-sonetng-02.txt, Bell Communications Research, August 1997. [9] Sharp, H. (Editor), "Interoperability Requirements for Nx56/64 kbit/s Calls", BONDING Spec Version 1.0, BONDING Consortium, Sept 1992. Expires January 1999 [Page 27] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 9. Security Considerations This MIB adds no security issues that are not raised by SNMP itself. As a Network Management Protocol, SNMP is capable of changing the configuration of a system, of denial of service attacks through requiring the agent to respond to its messages, and displaying values of system counters and configuration settings in the clear where an adversary might read them. This, however, is not in itself a threat: this is the function of the protocol, but could be misused. Such misuse can be avoided or minimized through SNMP Security. Setting the following objects to an inappropriate value can cause loss of traffic. In the case of dsx0RobbedBitSignalling, for example, the nature of the traffic flowing on the DS0 can be affected. dsx0RobbedBitSignalling dsx0IdleCode dsx0SeizedCode dsx0TransmitCodesEnable dsx0BundleRowStatus dsx0BondMode dsx0BondRowStatus Setting the following objects is mischievous, but not harmful to traffic. dsx0CircuitIdentifier dsx0BundleNextIndex 10. Authors' Addresses David Fowler Newbridge Networks 600 March Road Kanata, Ontario, Canada K2K 2E6 Phone: (613) 599-3600, ext 6559 EMail: davef@newbridge.com Expires January 1999 [Page 28] INTERNET-DRAFT DS0 MIB / DS0BUNDLE MIB July 1998 Table of Contents 1 The SNMPv2 Network Management Framework ...................... 2 2 Objects ...................................................... 3 3 Overview ..................................................... 4 3.1 BONDing Terminology ........................................ 4 3.2 Use of ifTable for DS0 Layer ............................... 4 3.3 Using ifStackTable ......................................... 5 3.3.1 Usage of Channelization for DS3, DS1, DS0 ................ 8 3.3.2 Usage of ifIndex Mapping for DS0Bundle ................... 9 4 Overview of the MIB .......................................... 10 4.1 DS0 MIB .................................................... 10 4.2 DS0Bundle MIB .............................................. 10 5 Object Definitions for DS0 ................................... 11 5.1 The DS0 Config Group ....................................... 12 5.1.1 The DS0 Configuration Table .............................. 12 5.1.2 The DS0 Channel Mapping Table ............................ 15 6 Object Definitions for DS0 Bundle ............................ 19 6.1 The DS0 Bundle Config Group ................................ 20 6.1.1 The DS0 Bundle Table ..................................... 20 6.2 The DS0 Bonding Group ...................................... 22 6.2.1 The DS0 Bonding Table .................................... 22 7 Acknowledgments .............................................. 26 8 References ................................................... 27 9 Security Considerations ...................................... 28 10 Authors' Addresses .......................................... 28 Expires January 1999 [Page 29]