Network Working Group J. Uberti Internet-Draft G. Shieh Intended status: Standards Track Google Expires: January 4, 2018 July 3, 2017 WebRTC IP Address Handling Requirements draft-ietf-rtcweb-ip-handling-04 Abstract This document provides information and requirements for how IP addresses should be handled by WebRTC implementations. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on January 4, 2018. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Uberti & Shieh Expires January 4, 2018 [Page 1] Internet-Draft WebRTC IP Handling July 2017 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Problem Statement . . . . . . . . . . . . . . . . . . . . . . 2 4. Goals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5. Detailed Design . . . . . . . . . . . . . . . . . . . . . . . 4 6. Application Guidance . . . . . . . . . . . . . . . . . . . . 6 7. Security Considerations . . . . . . . . . . . . . . . . . . . 6 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 7 10. References . . . . . . . . . . . . . . . . . . . . . . . . . 7 10.1. Normative References . . . . . . . . . . . . . . . . . . 7 10.2. Informative References . . . . . . . . . . . . . . . . . 7 Appendix A. Change log . . . . . . . . . . . . . . . . . . . . . 8 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 9 1. Introduction One of WebRTC's key features is its support of peer-to-peer connections. However, when establishing such a connection, which involves connectivity tests using various IP addresses, WebRTC may allow a web application to learn additional information about the user compared to an application that only uses the Hypertext Transfer Protocol (HTTP) [RFC7230]. This may be problematic in certain cases. This document summarizes the concerns, and makes recommendations on how WebRTC implementations should best handle the tradeoff between privacy and media performance. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Problem Statement In order to establish a peer-to-peer connection, WebRTC implementations use Interactive Connectivity Establishment (ICE) [RFC5245], which gathers and exchanges all the IP addresses it can discover, using techniques like Session Traversal Utilities for NAT (STUN) [RFC5389] and Traversal Using Relays around NAT (TURN) [RFC5766], in order to check the connectivity of each local-address- remote-address pair and select the best one. The addresses that are gathered usually consist of an endpoint's private physical/virtual addresses and its public Internet addresses. Uberti & Shieh Expires January 4, 2018 [Page 2] Internet-Draft WebRTC IP Handling July 2017 These addresses are exposed upwards to the web application, so that they can be communicated to the remote endpoint. This allows the application to learn more about the local network configuration than it would from a typical HTTP scenario, in which the web server would only see a single public Internet address, i.e. the address from which the HTTP request was sent. The information revealed falls into three categories: 1. If the client is behind a Network Address Translator (NAT), the client's private IP addresses, typically [RFC1918] addresses, can be learned. 2. If the client tries to hide its physical location through a Virtual Private Network (VPN), and the VPN and local OS support routing over multiple interfaces (i.e., a "split-tunnel" VPN), WebRTC will discover the public address for the VPN as well as the ISP public address that the VPN runs over. 3. If the client is behind a proxy (a client-configured "classical application proxy", as defined in [RFC1919], Section 3), but direct access to the Internet is also supported, WebRTC's STUN checks will bypass the proxy and reveal the public address of the client. Of these three concerns, #2 is the most significant concern, since for some users, the purpose of using a VPN is for anonymity. However, different VPN users will have different needs, and some VPN users (e.g. corporate VPN users) may in fact prefer WebRTC to send media traffic directly, i.e., not through the VPN. #3 is a less common concern, as proxy administrators can control this behavior through organization firewall policy if desired, coupled with the fact that forcing WebRTC traffic through a proxy will have negative effects on both the proxy and on media quality. For situations where this is an important consideration, use of a RETURN proxy, as described below, can be an effective solution. #1 is considered to be the least significant concern, given that the local address values often contain minimal information (e.g. 192.168.0.2), or have built-in privacy protection (e.g. [RFC4941] IPv6 addresses). Note also that these concerns predate WebRTC; Adobe Flash Player has provided similar functionality since the introduction of RTMFP [RFC7016] in 2008. Uberti & Shieh Expires January 4, 2018 [Page 3] Internet-Draft WebRTC IP Handling July 2017 4. Goals Being peer-to-peer, WebRTC represents a privacy-enabling technology, and therefore we want to avoid solutions that disable WebRTC or make it harder to use. This means that WebRTC should be configured by default to only reveal the minimum amount of information needed to establish a performant WebRTC session, while providing options to reveal additional information upon user consent, or further limit this information if the user has specifically requested this. Specifically, WebRTC should: o Provide a privacy-friendly default behavior which strikes the right balance between privacy and media performance for most users and use cases. o For users who care more about one versus the other, provide a means to customize the experience. 5. Detailed Design The key principles for the design are listed below: 1. By default, WebRTC should follow normal IP routing rules, to the extent that this is easy to determine (i.e., not considering proxies). This can be accomplished by binding local sockets to the wildcard addresses (0.0.0.0 for IPv4, :: for IPv6), which allows the OS to route WebRTC traffic the same way as it would HTTP traffic, and allows only the 'typical' public addresses to be discovered. 2. By default, support for direct connections between hosts (i.e., without traversing a NAT or relay server) should be maintained. To accomplish this, the local IPv4 and IPv6 addresses of the interface used for outgoing STUN traffic should still be surfaced as candidates, even when binding to the wildcard addresses as mentioned above. The appropriate addresses here can be discovered by the common trick of binding sockets to the wildcard addresses, connect()ing those sockets to some well-known public IP address, and then reading the bound local addresses via getsockname(). This approach requires no data exchange; it simply provides a mechanism for applications to retrieve the desired information from the kernel routing table. 3. Determining whether a web proxy is in use is a complex process, as the answer can depend on the exact site or address being contacted. Furthermore, web proxies that support UDP are not widely deployed today. As a result, when WebRTC is made to go through a proxy, it typically needs to use TCP, either ICE-TCP Uberti & Shieh Expires January 4, 2018 [Page 4] Internet-Draft WebRTC IP Handling July 2017 [RFC6544] or TURN-over-TCP [RFC5766]. Naturally, this has attendant costs on media quality as well as proxy performance, and should be avoided where possible. 4. RETURN [I-D.ietf-rtcweb-return] is a proposal for explicit proxying of WebRTC media traffic. When RETURN proxies are deployed, media and STUN checks will go through the proxy, but without the performance issues associated with sending through a typical web proxy. Based on these ideas, we define four specific modes of WebRTC behavior, reflecting different media quality/privacy tradeoffs: Mode 1: Enumerate all addresses: WebRTC MUST bind to all interfaces individually and use them all to attempt communication with STUN servers, TURN servers, or peers. This will converge on the best media path, and is ideal when media performance is the highest priority, but it discloses the most information. Mode 2: Default route + associated local addresses: WebRTC MUST follow the kernel routing table rules (e.g., by binding solely to the wildcard address), which will typically cause media packets to take the same route as the application's HTTP traffic. In addition, any private IPv4 and IPv6 addresses associated with the kernel-chosen interface MUST be discovered through getsockname, as mentioned above, and provided to the application. This ensures that direct connections can still be established in this mode. Mode 3: Default route only: This is the the same as Mode 2, except that the associated private address MUST NOT be provided. This may cause traffic to hairpin through a NAT, fall back to the application TURN server, or fail altogether, with resulting quality implications. Mode 4: Force proxy: This forces all WebRTC media traffic through a proxy, if one is configured. If the proxy does not support UDP (as is the case for all HTTP and most SOCKS [RFC1928] proxies), or the WebRTC implementation does not support UDP proxying, the use of UDP will be disabled, and TCP will be used to send and receive media through the proxy. Use of TCP will result in reduced quality, in addition to any performance considerations associated with sending all WebRTC media through the proxy server. Mode 1 MUST only be used when user consent has been provided; this thwarts the typical drive-by enumeration attacks. The details of Uberti & Shieh Expires January 4, 2018 [Page 5] Internet-Draft WebRTC IP Handling July 2017 this consent are left to the implementation; one potential mechanism is to tie this consent to getUserMedia consent. In cases where user consent has not been obtained, Mode 2 SHOULD be used. This allows applications to still achieve direct connections in many cases, even without consent (e.g., data channel applications). However, user agents MAY choose a stricter default policy in certain circumstances. Note that when a RETURN proxy is configured for the interface associated with the default route, Mode 2 and 3 will cause any external media traffic to go through the RETURN proxy. While the RETURN approach gives the best performance, a similar result can be achieved for non-RETURN proxies via an organization firewall policy that only allows external WebRTC traffic to leave through the proxy (typically, over TCP). This provides a way to ensure the proxy is used for any external traffic, but avoids the performance issues of Mode 4, where all media is forced through said proxy, for intra- organization traffic. 6. Application Guidance The recommendations mentioned in this document may cause certain WebRTC applications to malfunction. In order to be robust in all scenarios, the following guidelines are provided for applications: o Applications SHOULD deploy a TURN server with support for both UDP and TCP connections to the server. This ensures that connectivity can still be established, even when Mode 3 or 4 are in use, assuming the TURN server can be reached. o Applications SHOULD detect when they don't have access to the full set of ICE candidates by checking for the presence of host candidates. If no host candidates are present, Mode 3 or 4 above is in use; this knowledge can be useful for diagnostic purposes. 7. Security Considerations This document is entirely devoted to security considerations. 8. IANA Considerations This document requires no actions from IANA. Uberti & Shieh Expires January 4, 2018 [Page 6] Internet-Draft WebRTC IP Handling July 2017 9. Acknowledgements Several people provided input into this document, including Bernard Aboba, Harald Alvestrand, Ted Hardie, Matthew Kaufmann, Eric Rescorla, Adam Roach, and Martin Thomson. 10. References 10.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . 10.2. Informative References [I-D.ietf-rtcweb-return] Schwartz, B. and J. Uberti, "Recursively Encapsulated TURN (RETURN) for Connectivity and Privacy in WebRTC", draft- ietf-rtcweb-return-02 (work in progress), March 2017. [RFC1918] Rekhter, Y., Moskowitz, B., Karrenberg, D., de Groot, G., and E. Lear, "Address Allocation for Private Internets", BCP 5, RFC 1918, DOI 10.17487/RFC1918, February 1996, . [RFC1919] Chatel, M., "Classical versus Transparent IP Proxies", RFC 1919, DOI 10.17487/RFC1919, March 1996, . [RFC1928] Leech, M., Ganis, M., Lee, Y., Kuris, R., Koblas, D., and L. Jones, "SOCKS Protocol Version 5", RFC 1928, DOI 10.17487/RFC1928, March 1996, . [RFC4941] Narten, T., Draves, R., and S. Krishnan, "Privacy Extensions for Stateless Address Autoconfiguration in IPv6", RFC 4941, DOI 10.17487/RFC4941, September 2007, . [RFC5245] Rosenberg, J., "Interactive Connectivity Establishment (ICE): A Protocol for Network Address Translator (NAT) Traversal for Offer/Answer Protocols", RFC 5245, DOI 10.17487/RFC5245, April 2010, . Uberti & Shieh Expires January 4, 2018 [Page 7] Internet-Draft WebRTC IP Handling July 2017 [RFC5389] Rosenberg, J., Mahy, R., Matthews, P., and D. Wing, "Session Traversal Utilities for NAT (STUN)", RFC 5389, DOI 10.17487/RFC5389, October 2008, . [RFC5766] Mahy, R., Matthews, P., and J. Rosenberg, "Traversal Using Relays around NAT (TURN): Relay Extensions to Session Traversal Utilities for NAT (STUN)", RFC 5766, DOI 10.17487/RFC5766, April 2010, . [RFC6544] Rosenberg, J., Keranen, A., Lowekamp, B., and A. Roach, "TCP Candidates with Interactive Connectivity Establishment (ICE)", RFC 6544, DOI 10.17487/RFC6544, March 2012, . [RFC7016] Thornburgh, M., "Adobe's Secure Real-Time Media Flow Protocol", RFC 7016, DOI 10.17487/RFC7016, November 2013, . [RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing", RFC 7230, DOI 10.17487/RFC7230, June 2014, . Appendix A. Change log Changes in draft -04: o Rewording and cleanup in abstract, intro, and problem statement. o Added 2119 boilerplate. o Fixed weird reference spacing. o Expanded acronyms on first use. o Removed 8.8.8.8 mention. o Removed mention of future browser considerations. Changes in draft -03: o Clarified when to use which modes. o Added 2119 qualifiers to make normative statements. o Defined 'proxy'. Uberti & Shieh Expires January 4, 2018 [Page 8] Internet-Draft WebRTC IP Handling July 2017 o Mentioned split tunnels in problem statement. Changes in draft -02: o Recommendations -> Requirements o Updated text regarding consent. Changes in draft -01: o Incorporated feedback from Adam Roach; changes to discussion of cam/mic permission, as well as use of proxies, and various editorial changes. o Added several more references. Changes in draft -00: o Published as WG draft. Authors' Addresses Justin Uberti Google 747 6th St S Kirkland, WA 98033 USA Email: justin@uberti.name Guo-wei Shieh Google 747 6th St S Kirkland, WA 98033 USA Email: guoweis@google.com Uberti & Shieh Expires January 4, 2018 [Page 9]