HTTP/1.1 200 OK Date: Tue, 09 Apr 2002 07:03:33 GMT Server: Apache/1.3.20 (Unix) Last-Modified: Tue, 19 Sep 1995 22:00:00 GMT ETag: "304f26-6073-305f3d60" Accept-Ranges: bytes Content-Length: 24691 Connection: close Content-Type: text/plain DRAFT RIP-II Cryptographic Authentication March 1995 RIP-II Cryptographic Authentication | draft-ietf-ripv2-md5-01.txt | Fri Mar 17 11:41:29 PST 1995 Fred Baker Cisco Systems fred@cisco.com Randall Atkinson Information Technology Division Naval Research Laboratory atkinson@itd.nrl.navy.mil Status of this Memo This document is an Internet Draft. Internet Drafts are working documents of the Internet Engineering Task Force (IETF), its Areas, and its Working Groups. Note that other groups may also distribute working documents as Internet Drafts. Internet Drafts are valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet Drafts as reference material or to cite them other than as a "work in progress". Expires October 1995 [Page 1] DRAFT RIP-II Cryptographic Authentication March 1995 1. Introduction Growth in the Internet has made us aware of the need for improved authentication of routing information. RIP-II provides for unauthenticated service (as in classical RIP), or password authentication. Both are vulnerable to passive attacks currently widespread in the Internet. Well-understood security issues exist in routing protocols [4]. Clear text passwords, currently specified for use with RIP-II, are no longer considered sufficient [5]. If authentication is disabled, then only simple misconfigurations are detected. Simple passwords transmitted in the clear will further protect against the honest neighbor, but are useless in the general case. By simply capturing information on the wire - straightforward even in a remote environment - a hostile process can learn the password and overcome the network. We propose that RIP-II use an authentication algorithm, as in SNMP Version 2, augmented by a sequence number. MD5 is proposed as the standard authentication algorithm for RIP-II, but the mechanism is intended to be algorithm-independent. While this mechanism is not unbreakable (no known mechanism is), it provides a greatly enhanced probability that a system being attacked will detect and ignore hostile messages. This is because we transmit the output of an authentication algorithm (e.g., MD5) rather than the secret RIP-II Authentication Key. This output is a one-way function of a message and a secret RIP-II Authentication Key. This RIP-II Authentication Key is never sent over the network in the clear, thus providing protection against the passive attacks now commonplace in the Internet. In this way, protection is afforded against forgery or message modification. It is possible to replay a message until the sequence number changes, but the sequence number makes replay in the long term less of an issue. The mechanism does not afford confidentiality, since messages stay in the clear; however, the mechanism is also exportable from most countries, which test a confidentiality algorithm would fail. Other relevant rationales for the approach are that MD5 is used in SNMP Version 2, and is therefore present in routers already, as is some form of password management. A similar approach has been proposed for authentication in IP version 6 (IPv6). Expires October 1995 [Page 2] DRAFT RIP-II Cryptographic Authentication March 1995 2. Implementation Approach Implementation requires three issues to be addressed: (1) A changed packet format, (2) Authentication procedures, and (3) Management controls. 2.1. RIP-II PDU Format The basic RIP-II message format provides for an 8 byte header with an array of 20 byte records as its data content. When MD5 is used, the same header and content are used, except that the 16 byte "authentication key" field is reused to describe a "Keyed Message Digest" trailer. This consists in five fields: (1) The "Authentication Type" is Keyed Message Digest Algorithm, indicated by the value 3 (1 and 2 indicate "IP Route" and "Password", respectively). (2) A 16 bit offset from the RIP-II header to the record containing the cryptogtaphic digest. This value effectively points to the end of routing data in the packet.. (3) An unsigned 8-bit field that contains the Key Identifier or Key-ID. This identifies the key used to create the Authentication Data for this RIP-II message. A key is associated with an interface. (4) An unsigned 8-bit field that contains the length in octets of the trailing Authentication Data field. The presence of this field permits other algorithms (e.g., SHA) to be substituted for MD5 if desired. (5) An unsigned 32 bit non-decreasing sequence number. The trailer consists of the Authentication Data, which is the output of the Keyed Message Digest Algorithm. When the Authentication Algorithm is MD5, the output data is 16 bytes; during digest calculation, this is effectively followed by a pad field and a length field as defined by RFC 1321. The field is contained in a record reminiscient of other entiries, to be kind to ancient RIP implementations, but the actual length of the digest varies by algorithm. Expires October 1995 [Page 3] DRAFT RIP-II Cryptographic Authentication March 1995 2.2. Processing Algorithm When the authentication type is "Keyed Message Digest", message processing is changed in message creation and reception. 0 1 2 3 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Command (1) | Version (1) | Routing Domain (2) | +---------------+---------------+-------------------------------+ | 0xFFFF | AuType=Keyed Message Digest | +-------------------------------+-------------------------------+ | RIP-II Packet Length | Key ID | Auth Data Len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Sequence Number (non-decreasing) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | reserved must be zero | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | reserved must be zero | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | / (RIP-II Packet length-24) bytes Data / | | +---------------+---------------+-------------------------------+ | 0xFFFF | 0x01 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ / Authentication Data (var. length; 16 bytes when MD5 is used) / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The MD5 algorithm logically appends the following information to the packet during the MD5 calculation. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | zero or more pad bytes (defined by RFC 1321 when MD5 is used) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 64 bit message length MSW | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 64 bit message length LSW | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Expires October 1995 [Page 4] DRAFT RIP-II Cryptographic Authentication March 1995 2.2.1. Message Generation The RIP-II Packet is created as usual, with these exceptions: (1) The UDP checksum need not be calculated. If it is not, it MUST be set to zero. (2) The authentication type field indicates the Keyed Message Digest Algorithm (2). (3) The authentication "password" field is reused to store a packet offset to the Authentication Data, a Key Identifier, the Authentication Data Length, and a non-decreasing sequence number. The value used in the sequence number is arbitrary, but two suggestions are the time of the message's creation or a simple message counter. The RIP-II Authentication Key is selected by the sender based on the outgoing interface. Each key has a lifetime associated with it. No key is ever used outside its lifetime. If more than one key is currently alive, then the youngest key (the key whose lifetime most recently started) SHOULD be used. Since the key's algorithm is an attribute of the key, stored in the sender and receiver along with it, the Key ID effectively indicates which authentication algorithm is in use if the implementation supports more than one authentication algorithm. (1) The RIP-II header's packet length field indicates the standard RIP-II portion of the packet. (2) The Authentication Data Offset, Key Identifier, and Authentication Data size fields are filled in appropriately. (3) The RIP-II Authentication Key, which is 16 bytes long when the MD5 algorithm is used, is now appended to the data. For all algorithms, the RIP-II Authentication Key is never longer than the output of the algorithm in use. (4) Trailing pad and length fields are added and the digest calculated using the indicated algorithm. When MD5 is the algorithm in use, these are calculated per RFC 1321. (5) The digest is written over the RIP-II Authentication Key. When MD5 is used, this digest will be 16 bytes long. Expires October 1995 [Page 5] DRAFT RIP-II Cryptographic Authentication March 1995 The trailing pad is not actually transmitted, as it is entirely predictable from the message length and algorithm in use. 2.2.2. Message Reception When the message is received, the process is reversed: (1) The digest is set aside, (2) The appropriate algorithm and key are determined from the value of the Key Identifier field, (3) The RIP-II Authentication Key is written into the appropriate number (16 when MD5 is used) of bytes starting at the offset indicated, (4) Appropriate padding is added as needed, and (5) A new digest calculated using the indicated algorithm. If the calculated digest does not match the received digest, the message is discarded unprocessed. If the neighbor has been heard from recently enough to have viable routes in the route table and the received sequence number is less than the last one received, the message likewise is discarded unprocessed. The received sequence number must, of course, be stored by neighbor and zeroed whenever it determines that connectivity to the neighbor has been lost. Acceptable messages are now truncated to RIP-II message itself and treated normally. 3. Management Procedures 3.1. Key Management Requirements It is strongly desirable that a hypothetical security breach in one Internet protocol not automatically compromise other Internet protocols. The Authentication Key of this specification SHOULD NOT be stored using protocols or algorithms that have known flaws or fail to afford perfect forward secrecy. Implementations MUST support the storage of more than one key at the same time, although it is recognized that only one key will normally be active on an interface. They MUST associate a specific lifetime (i.e., data/time first valid and data/time no longer valid) and a key identifier with each key, and MUST support manual key distribution (e.g., the privileged user manually typing in the key, key lifetime, and Expires October 1995 [Page 6] DRAFT RIP-II Cryptographic Authentication March 1995 key identifier on the router console). The lifetime may be infinite. If more than one algorithm is supported, then the implementation MUST require that the algorithm be specified for each key at the time the other key information is entered. Keys that are out of date MAY be deleted at will by the implementation without requiring human intervention. Manual deletion of active keys SHOULD also be supported. Note that there are four "times" that are important with respect to a key: + The time the system starts accepting received packets signed with | the key (KeyStartReceive). + The time the system starts signing packets with the key | (KeyStartSign). + The time the system stops signing packets with the key, which is to | say, the time it starts signing with the next key (KeyStopSign). + The time the system stops accepting received packets signed with the | key (KeyStopReceive). The times SHOULD be in the order listed, which is to say that none of these times occurs before the one mentioned before it. There needs to be some distance between starts and between stops in order to get a seamless transition. Each system sends with whichever key has the most recent "start" time, and makes its first attempt at validation of incoming traffic with the same key. If this validation fails and | another (older) key is also active, the system should attempt to | validate with any other active keys it may possess. Note that the concept of a "key lifetime" does not require a hardware time of day clock or the use of NTP, although one or the other is advised; it merely requires that the earliest and latest times that the key is valid must be programmable in a way the router understands. It is likely that the IETF will define a standard key management protocol. It is strongly desirable to use that key management protocol to distribute RIP-II Authentication Keys among communicating RIP-II implementations. Such a protocol would provide scalability and significantly reduce the human administrative burden. The Key ID can be used as a hook between RIP-II and such a future protocol. Key management protocols have a long history of subtle flaws that are often discovered long after the protocol was first described in public. To avoid having to change all RIP-II implementations should such a flaw be discovered, integrated key management protocol techniques were deliberately omitted from this specification. Expires October 1995 [Page 7] DRAFT RIP-II Cryptographic Authentication March 1995 3.2. Key Management Procedures As with all security methods using keys, it is necessary to change the RIP-II Authentication Key on a regular basis. To maintain routing stability during such changes, implementations are required to store and support the use of more than one RIP-II Authentication Key on a given interface at the same time. Each key will have its own Key Identifier, which is stored locally. The combination of the Key Identifier and the interface associated with the message uniquely identifies the Authentication Algorithm and RIP-II Authentication Key in use. As noted above in Section 2.2.1, the party creating the RIP-II message will select a valid key from the set of valid keys for that interface. The receiver will use the Key Identifier and interface to determine which key to use for authentication of the received message. More than one key may be associated with an interface at the same time. Hence it is possible to have fairly smooth RIP-II Authentication Key rollovers without losing legitimate RIP-II messages because the stored key is incorrect and without requiring people to change all the keys at once. To ensure a smooth rollover, each communicating RIP-II system must be updated with the new key several minutes before they current key will expire and several minutes before the new key lifetime begins. The new key should have a lifetime that starts several minutes before the old key expires. This gives time for each system to learn of the new RIP-II Authentication Key before that key will be used. It also ensures that the new key will begin being used and the current key will go out of use before the current key's lifetime expires. For the duration of the overlap in key lifetimes, a system may receive messages using either key and authenticate the message. Key storage SHOULD persist across a system restart, warm or cold, to avoid operational issues. Key lifetime is an obvious issue, to be solved by the implementation. Obvious solutions include the use of the Network Time Protocol, hardware time of day clocks, or waiting some period of time before emitting the initial RIP REQUEST to determine what key other systems are signing with. The matter is left for the implementor. 3.3. Pathological Cases Two pathological cases exist which must be handled, which are failures of the network manager. Both of these should be exceedingly rare. Expires October 1995 [Page 8] DRAFT RIP-II Cryptographic Authentication March 1995 During key switchover, devices may exist which have not yet been successfully configured with the new key. Therefore, routers MAY implement (and would be well advised to implement) an algorithm that detects the set of keys being used by its neighbors, and transmits its messages using both the new and old keys until all of the neighbors are using the new key or the lifetime of the old key expires. Under normal circumstances, this elevated transmission rate will exist for a single update interval. In the event that the last key associated with an interface expires, it is unacceptable to revert to an unauthenticated condition, and not advisable to disrupt routing. Therefore, the router should send a "last authentication key expiration" notification to the network manager and treat the key as having an infinite lifetime until the lifetime is extended, the key is deleted by network management, or a new key is configured. 4. Conformance Requirements To conform to this specification, an implementation MUST support all of its aspects. The MD5 authentication algorithm defined in RFC-1321 MUST be implemented by all conforming implementations. A conforming implementation MAY also support other authentication algorithms such as NIST's Secure Hash Algorithm (SHA). Manual key distribution as described above MUST be supported by all conforming implementations. All implementations MUST support the smooth key rollover described under "Key Change Procedures." The user documentation provided with the implementation MUST contain clear instructions on how to ensure that smooth key rollover occurs. Implementations SHOULD support a standard key management protocol for secure distribution of RIP-II Authentication Keys once such a key management protocol is standardized by the IETF. 5. Acknowledgments This work was done by the RIP-II Working Group, of which Gary Malkin is the Chair. This suggestion was originally made by Christian Huitema on behalf of the IAB. Jeff Honig (Cornell) and Dennis Ferguson (ANS) built the first operational prototype, proving out the algorithms. The authors gladly acknowledge significant inputs from each of these sources. Expires October 1995 [Page 9] DRAFT RIP-II Cryptographic Authentication March 1995 6. References [1] Malkin, Gary, "RIP Version 2 Carrying Additional Information", RFC 1388, January 1993. [2] Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321, April 1992. [3] Malkin, G., and F. Baker, "RIP Version 2 MIB Extension", RFC 1389, Xylogics, Inc., Advanced Computer Communications, January 1993. [4] S. Bellovin, "Security Problems in the TCP/IP Protocol Suite", ACM Computer Communications Review, Volume 19, Number 2, pp.32-48, April 1989. [5] N. Haller, R. Atkinson, "On Internet Authentication", Request for Comments 1704, DDN Network Information Center, October 1994. [6] R. Braden, D. Clark, S. Crocker, & C. Huitema, "Report of IAB Workshop on Security in the Internet Architecture", Request for Comments 1636, DDN Network Information Center, June 1994. 7. Security Considerations This entire memo describes and specifies an authentication mechanism for the RIP-II routing protocol that is believed to be secure against active and passive attacks. Passive attacks are clearly widespread in the Internet at present. Protection against active attacks is also needed even though such attacks are not currently widespread. Users need to understand that the quality of the security provided by this mechanism depends completely on the strength of the implemented authentication algorithms, the strength of the key being used, and the correct implementation of the security mechanism in all communicating RIP-II implementations. This mechanism also depends on the RIP-II Authentication Key being kept confidential by all parties. If any of these incorrect or insufficiently secure, then no real security will be provided to the users of this mechanism. Specifically with respect to the use of SNMP, compromise of SNMP security has the necessary result that the various RIP-II configuration parameters (e.g. routing table, RIP-II Authentication Key) managable via SNMP could be compromised as well. Changing Authentication Keys using non-encrypted SNMP is no more secure than sending passwords in the Expires October 1995 [Page 10] DRAFT RIP-II Cryptographic Authentication March 1995 clear. Confidentiality is not provided by this mechanism. Work is underway within the IETF to specify a standard mechanism for IP-layer encryption. That mechanism might be used to provide confidentiality for RIP-II in the future. Protection against traffic analysis is also not provided. Mechanisms such as bulk link encryption might be used when protection against traffic analysis is required. The memo is written to address a security consideration in RIP-II Version 2 that was raised during the IAB's recent security review [6]. 8. Chairman's Address Gary Scott Malkin Xylogics, Inc. 53 Third Avenue Burlington, MA 01803 Phone: (617) 272-8140 EMail: gmalkin@Xylogics.COM 9. Author's Address Fred Baker Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Phone: (805) 681 0115 Email: fred@cisco.com Randall Atkinson Information Technology Division Naval Research Laboratory Washington, DC 20375-5320 Voice: (DSN) 354-8590 Fax: (DSN) 354-7942 Email: atkinson@itd.nrl.navy.mil Expires October 1995 [Page 11] DRAFT RIP-II Cryptographic Authentication March 1995 Table of Contents 1 Introduction .................................................... 2 2 Implementation Approach ......................................... 3 2.1 RIP-II PDU Format ............................................. 3 2.2 Processing Algorithm .......................................... 4 2.2.1 Message Generation .......................................... 5 2.2.2 Message Reception ........................................... 6 3 Management Procedures ........................................... 6 3.1 Key Management Requirements ................................... 6 3.2 Key Management Procedures ..................................... 8 3.3 Pathological Cases ............................................ 8 4 Conformance Requirements ........................................ 9 5 Acknowledgments ................................................. 9 6 References ...................................................... 10 7 Security Considerations ......................................... 10 8 Chairman's Address .............................................. 11 9 Author's Address ................................................ 11 Expires October 1995 [Page 12]