Open Authentication Protocol T. Lodderstedt, Ed. Internet-Draft yes.com AG Intended status: Standards Track V. Dzhuvinov Expires: February 29, 2020 Connect2id Ltd. Aug 28, 2019 JWT Response for OAuth Token Introspection draft-ietf-oauth-jwt-introspection-response-06 Abstract This draft proposes an additional JSON Web Token (JWT) based response for OAuth 2.0 Token Introspection. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on February 29, 2020. Copyright Notice Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 1] Internet-Draft JWT Response Aug 2019 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Requirements Notation and Conventions . . . . . . . . . . 3 2. Requesting a JWT Response . . . . . . . . . . . . . . . . . . 3 3. JWT Response . . . . . . . . . . . . . . . . . . . . . . . . 3 4. Client Metadata . . . . . . . . . . . . . . . . . . . . . . . 5 5. Authorization Server Metadata . . . . . . . . . . . . . . . . 5 6. Security Considerations . . . . . . . . . . . . . . . . . . . 6 6.1. Cross-JWT Confusion . . . . . . . . . . . . . . . . . . . 6 6.2. Token Data Leakage . . . . . . . . . . . . . . . . . . . 7 6.3. Keeping Token Data Confidential from OAuth Clients . . . 7 6.4. Logging and Audit of Introspection Activity . . . . . . . 7 6.5. Data Minimization . . . . . . . . . . . . . . . . . . . . 7 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 7 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8 8.1. OAuth Dynamic Client Registration Metadata Registration . 8 8.1.1. Registry Contents . . . . . . . . . . . . . . . . . . 8 8.2. OAuth Authorization Server Metadata Registration . . . . 8 8.2.1. Registry Contents . . . . . . . . . . . . . . . . . . 8 8.3. OAuth Token Introspection Response . . . . . . . . . . . 9 8.3.1. Registry Contents . . . . . . . . . . . . . . . . . . 9 9. References . . . . . . . . . . . . . . . . . . . . . . . . . 14 9.1. Normative References . . . . . . . . . . . . . . . . . . 14 9.2. Informative References . . . . . . . . . . . . . . . . . 15 Appendix A. Document History . . . . . . . . . . . . . . . . . . 16 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 17 1. Introduction OAuth 2.0 Token Introspection [RFC7662] specifies a method for a protected resource to query an OAuth 2.0 authorization server to determine the state of an access token and obtain data associated with the access token. This allows deployments to implement identifier-based access tokens in an interoperable way. The introspection response, as specified in OAuth 2.0 Token Introspection [RFC7662], is a plain JSON object. However, there are use cases where the resource server requires stronger assurance that the authorization server issued the access token, including cases where the authorization server assumes liability for the token's content. An example is a resource server using verified person data to create certificates, which in turn are used to create qualified electronic signatures. In such use cases it may be useful or even required to return a signed JWT as the introspection response. This specification extends Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 2] Internet-Draft JWT Response Aug 2019 the token introspection endpoint with the capability to return responses as JWTs. 1.1. Requirements Notation and Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. Requesting a JWT Response A resource server requests to receive a JWT introspection response by including an Accept header with content type "application/jwt" in the introspection request. The following is a non-normative example request: POST /introspect HTTP/1.1 Host: server.example.com Accept: application/jwt Content-Type: application/x-www-form-urlencoded token=2YotnFZFEjr1zCsicMWpAA 3. JWT Response The introspection endpoint responds with a JWT, setting the Content- Type header to "application/jwt". This JWT MUST contain the claims "iss" and "aud" in order to prevent misuse of the JWT as ID or access token (see Section 6.1). This JWT MAY furthermore contain all claims defined in the "OAuth Token Introspection Response" registry established by [RFC7662]. The following is a non-normative example response (with line breaks for display purposes only): Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 3] Internet-Draft JWT Response Aug 2019 HTTP/1.1 200 OK Content-Type: application/jwt eyJraWQiOiIxIiwiYWxnIjoiUlMyNTYifQ.eyJzdWIiOiJaNU8zdXBQQzg4UXJBa ngwMGRpcyIsImF1ZCI6Imh0dHBzOlwvXC9wcm90ZWN0ZWQuZXhhbXBsZS5uZXRcL 3Jlc291cmNlIiwiZXh0ZW5zaW9uX2ZpZWxkIjoidHdlbnR5LXNldmVuIiwic2Nvc GUiOiJyZWFkIHdyaXRlIGRvbHBoaW4iLCJpc3MiOiJodHRwczpcL1wvc2VydmVyL mV4YW1wbGUuY29tXC8iLCJhY3RpdmUiOnRydWUsImV4cCI6MTQxOTM1NjIzOCwia WF0IjoxNDE5MzUwMjM4LCJjbGllbnRfaWQiOiJsMjM4ajMyM2RzLTIzaWo0Iiwid XNlcm5hbWUiOiJqZG9lIn0.HEQHf05vqVvWVnWuEjbzUnPz6JDQVR69QkxgzBNq5 kk-sK54ieg1STazXGsdFAT8nUhiiV1f_Z4HOKNnBs8TLKaFXokhA0MqNBOYI--2u nVHDqI_RPmC3p0NmP02Xmv4hzxFmTmpgjSy3vpKQDihOjhwNBh7G81JNaJqjJQTR v_1dHUPJotQjMK3k8_5FyiO2p64Y2VyxyQn1VWVlgOHlJwhj6BaGHk4Qf5F8DHQZ 1WCPg2p_-hwfINfXh1_buSjxyDRF4oe9pKy6ZB3ejh9qIMm-WrwltuU1uWMXxN6e S6tUtpKo8UCHBwLWCHmJN7KU6ZojmaISspdS23lELAlyw The example response contains the following JSON document: { "sub": "Z5O3upPC88QrAjx00dis", "aud": "https://protected.example.net/resource", "scope": "read write dolphin", "iss": "https://server.example.com/", "active": true, "exp": 1419356238, "iat": 1419350238, "client_id": "l238j323ds-23ij4", "given_name": "John", "family_name":"Doe", "birthdate":"1982-02-01" } Depending on the specific resource server policy the JWT is either signed, or signed and encrypted. If the JWT is signed and encrypted it MUST be a Nested JWT, as defined in JWT [RFC7519]. Note: If the resource server policy requires a signed and encrypted response and the authorization server receives an unauthenticated request containing an Accept header with content type other than "application/jwt", it MUST refuse to serve the request and return an HTTP status code 400. This is done to prevent downgrading attacks to obtain token data intended for release to legitimate recipients only (see Section 6.2). Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 4] Internet-Draft JWT Response Aug 2019 4. Client Metadata The authorization server determines what algorithm to employ to secure the JWT for a particular introspection response. This decision can be based on registered metadata parameters for the resource server, supplied via dynamic client registration with the resource server posing as the client, as defined by this draft. The parameter names follow the pattern established by OpenID Connect Dynamic Client Registration [OpenID.Registration] for configuring signing and encryption algorithms for JWT responses at the UserInfo endpoint. The following client metadata parameters are introduced by this specification: introspection_signed_response_alg OPTIONAL. JWS [RFC7515] algorithm ("alg" value) as defined in JWA [RFC7518] for signing introspection responses. If this is specified, the response will be signed using JWS and the configured algorithm. The default, if omitted, is "RS256". introspection_encrypted_response_alg OPTIONAL. JWE [RFC7516] algorithm ("alg" value) as defined in JWA [RFC7518] for encrypting introspection responses. If this is specified, the response will be encrypted using JWE and the configured algorithm. The default, if omitted, is that no encryption is performed. If both signing and encryption are requested, the response will be signed then encrypted, with the result being a Nested JWT, as defined in JWT [RFC7519]. introspection_encrypted_response_enc OPTIONAL. JWE [RFC7516] algorithm ("enc" value) as defined in JWA [RFC7518] for authenticated encryption of introspection responses. The default, if omitted, is "A128CBC-HS256". Note: This parameter MUST NOT be specified without setting "introspection_encrypted_response_alg". Resource servers may register their public encryption keys using the "jwks_uri" or "jwks" metadata parameters. 5. Authorization Server Metadata Authorization servers SHOULD publish the supported algorithms for signing and encrypting the JWT of an introspection response by utilizing OAuth 2.0 Authorization Server Metadata [RFC8414] parameters. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 5] Internet-Draft JWT Response Aug 2019 The following parameters are introduced by this specification: introspection_signing_alg_values_supported OPTIONAL. JSON array containing a list of the JWS [RFC7515] signing algorithms ("alg" values) as defined in JWA [RFC7518] supported by the introspection endpoint to sign the response. introspection_encryption_alg_values_supported OPTIONAL. JSON array containing a list of the JWE [RFC7516] encryption algorithms ("alg" values) as defined in JWA [RFC7518] supported by the introspection endpoint to encrypt the response. introspection_encryption_enc_values_supported OPTIONAL. JSON array containing a list of the JWE [RFC7516] encryption algorithms ("enc" values) as defined in JWA [RFC7518] supported by the introspection endpoint to encrypt the response. 6. Security Considerations 6.1. Cross-JWT Confusion JWT introspection responses and OpenID Connect ID Tokens are syntactically similar. An attacker could therefore attempt to impersonate an end-user at a OpenID Connect relying party by passing the JWT as an ID token. Such an attack can be prevented like any other token substitution attack. The authorization server MUST include the claims "iss" and "aud" in each JWT introspection response, with the "iss" value set to the authorization server's issuer URL and the "aud" value set to the resource server's identifier. This allows a correctly implemented OpenID Connect relying party to detect substitution by checking the "iss" and "aud" claims as described in Section 3.1.3.7. of [OpenID.Core]. Relying parties SHOULD also use and check the "nonce" parameter and claim to prevent token and code replay. Resource servers utilizing JWTs to represent self-contained access tokens could be susceptible to replay attacks. Resource servers should therefore apply proper counter measures against replay as described in [I-D.ietf-oauth-security-topics], section 2.2. JWT Confusion and other attacks involving JWTs are discussed in [I-D.ietf-oauth-jwt-bcp]. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 6] Internet-Draft JWT Response Aug 2019 6.2. Token Data Leakage The authorization server MUST use Transport Layer Security (TLS) 1.2 (or higher) per [RFC7525] in order to prevent token data leakage. To prevent introspection of leaked tokens and to present an additional security layer against token guessing attacks the authorization server may require all requests to the token introspection endpoint to be authenticated. As an alternative or as an addition to the authentication, the intended recipients may be set up for encrypted responses. In the latter case, confidentiality is ensured by the fact that only the legitimate recipient is able to decrypt the response. An attacker could try to circumvent this measure by requesting a plain JSON response, using an Accept header with the content type set to, for example, "application/json" instead of "application/jwt". To prevent this attack the authorization server MUST NOT serve requests with content type other than "application/jwt" if the resource server is set up to receive encrypted responses (see also Section 3). 6.3. Keeping Token Data Confidential from OAuth Clients Authorization servers with a policy that requires token data to be kept confidential from OAuth clients must require all requests to the token introspection endpoint to be authenticated. As an alternative or as an addition to the authentication, the intended recipients may be set up for encrypted responses. 6.4. Logging and Audit of Introspection Activity Authorization servers with a policy that requires token introspection activity to be logged and audited must require all requests to the token introspection endpoint to be authenticated. 6.5. Data Minimization The authorisation server determines the token data a resource server is allowed to see based on the resource server's client_id and suitable token data, e.g. the scope value. 7. Acknowledgements We would like to thank Petteri Stenius, Neil Madden, Filip Skokan, and Tony Nadalin for their valuable feedback. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 7] Internet-Draft JWT Response Aug 2019 8. IANA Considerations 8.1. OAuth Dynamic Client Registration Metadata Registration This specification requests registration of the following client metadata definitions in the IANA "OAuth Dynamic Client Registration Metadata" registry [IANA.OAuth.Parameters] established by [RFC7591]: 8.1.1. Registry Contents o Client Metadata Name: "introspection_signed_response_alg" o Client Metadata Description: String value indicating the client's desired introspection response signing algorithm. o Change Controller: IESG o Specification Document(s): Section 4 of [[ this specification ]] o Client Metadata Name: "introspection_encrypted_response_alg" o Client Metadata Description: String value specifying the desired introspection response encryption algorithm (alg value). o Change Controller: IESG o Specification Document(s): Section 4 of [[ this specification ]] o Client Metadata Name: "introspection_encrypted_response_enc" o Client Metadata Description: String value specifying the desired introspection response encryption algorithm (enc value). o Change Controller: IESG o Specification Document(s): Section 4 of [[ this specification ]] 8.2. OAuth Authorization Server Metadata Registration This specification requests registration of the following values in the IANA "OAuth Authorization Server Metadata" registry [IANA.OAuth.Parameters] established by [RFC8414]. 8.2.1. Registry Contents o Metadata Name: "introspection_signing_alg_values_supported" Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 8] Internet-Draft JWT Response Aug 2019 o Metadata Description: JSON array containing a list of algorithms supported by the authorization server for introspection response signing. o Change Controller: IESG o Specification Document(s): Section 5 of [[ this specification ]] o Metadata Name: "introspection_encryption_alg_values_supported" o Metadata Description: JSON array containing a list of algorithms supported by the authorization server for introspection response encryption (alg value). o Change Controller: IESG o Specification Document(s): Section 5 of [[ this specification ]] o Metadata Name: "introspection_encryption_enc_values_supported" o Metadata Description: JSON array containing a list of algorithms supported by the authorization server for introspection response encryption (enc value). o Change Controller: IESG o Specification Document(s): Section 5 of [[ this specification ]] 8.3. OAuth Token Introspection Response This specification requests registration of the following claim values as defined in [OpenID.Core], Section 5.1, in the IANA "OAuth Token Introspection Response" registry. [IANA.OAuth.Parameters] established by [RFC7662]. 8.3.1. Registry Contents o Name: "name" o Description: End-User's full name in displayable form including all name parts, possibly including titles and suffixes, ordered according to the End-User's locale and preferences. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "given_name" Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 9] Internet-Draft JWT Response Aug 2019 o Description: Given name(s) or first name(s) of the End-User. Note that in some cultures, people can have multiple given names; all can be present, with the names being separated by space characters. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "family_name" o Description: Surname(s) or last name(s) of the End-User. Note that in some cultures, people can have multiple family names or no family name; all can be present, with the names being separated by space characters. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "middle_name" o Description: Middle name(s) of the End-User. Note that in some cultures, people can have multiple middle names; all can be present, with the names being separated by space characters. Also note that in some cultures, middle names are not used. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "nickname" o Description: Casual name of the End-User that may or may not be the same as the given_name. For instance, a nickname value of Mike might be returned alongside a given_name value of Michael. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "preferred_username" o Description: Shorthand name by which the End-User wishes to be referred to at the RP, such as janedoe or j.doe. This value MAY be any valid JSON string including special characters such as @, /, or whitespace. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 10] Internet-Draft JWT Response Aug 2019 o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "profile" o Description:URL of the End-User's profile page. The contents of this Web page SHOULD be about the End-User. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "picture" o Description: URL of the End-User's profile picture. This URL MUST refer to an image file (for example, a PNG, JPEG, or GIF image file), rather than to a Web page containing an image. Note that this URL SHOULD specifically reference a profile photo of the End- User suitable for displaying when describing the End-User, rather than an arbitrary photo taken by the End-User. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "website" o Description: URL of the End-User's Web page or blog. This Web page SHOULD contain information published by the End-User or an organization that the End-User is affiliated with. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "email" o Description: End-User's preferred e-mail address. Its value MUST conform to the [RFC5322] "addr-spec" syntax. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "email_verified" Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 11] Internet-Draft JWT Response Aug 2019 o Description: True if the End-User's e-mail address has been verified; otherwise false. When this Claim Value is true, this means that the OP took affirmative steps to ensure that this e-mail address was controlled by the End-User at the time the verification was performed. The means by which an e-mail address is verified is context-specific, and dependent upon the trust framework or contractual agreements within which the parties are operating. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "gender" o Description:End-User's gender. Values defined by this specification are female and male. Other values MAY be used when neither of the defined values are applicable. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "birthdate" o Description:Time the End-User's information was last updated. Its value is a JSON number representing the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "zoneinfo" o Description: String from zoneinfo [zoneinfo] time zone database representing the End-User's time zone. For example, Europe/Paris or America/Los_Angeles. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "locale" o Description: Time the End-User's information was last updated. Its value is a JSON number representing the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 12] Internet-Draft JWT Response Aug 2019 o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "phone_number" o Description: End-User's preferred telephone number. E.164 [E.164] is RECOMMENDED as the format of this Claim, for example, +1 (425) 555-1212 or +56 (2) 687 2400. If the phone number contains an extension, it is RECOMMENDED that the extension be represented using the [RFC3966] extension syntax, for example, +1 (604) 555-1234;ext=5678. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "phone_number_verified" o Description: True if the End-User's phone number has been verified; otherwise false. When this Claim Value is true, this means that the OP took affirmative steps to ensure that this phone number was controlled by the End-User at the time the verification was performed. The means by which a phone number is verified is context-specific, and dependent upon the trust framework or contractual agreements within which the parties are operating. When true, the phone_number Claim MUST be in E.164 format and any extensions MUST be represented in [RFC3966] format. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "address" o Description: End-User's preferred postal address. The value of the address member is a JSON [RFC8259] structure containing some or all of the members defined in [OpenID.Core], Section 5.1.1. o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 o Name: "updated_at" o Description: Time the End-User's information was last updated. Its value is a JSON number representing the number of seconds from 1970-01-01T0:0:0Z as measured in UTC until the date/time. Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 13] Internet-Draft JWT Response Aug 2019 o Change Controller: IESG o Specification Document(s):[OpenID.Core], Section 5.1 9. References 9.1. Normative References [I-D.ietf-oauth-jwt-bcp] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best Current Practices", draft-ietf-oauth-jwt-bcp-06 (work in progress), June 2019. [I-D.ietf-oauth-security-topics] Lodderstedt, T., Bradley, J., Labunets, A., and D. Fett, "OAuth 2.0 Security Best Current Practice", draft-ietf- oauth-security-topics-13 (work in progress), July 2019. [OpenID.Core] Sakimura, N., Bradley, J., Jones, M., Medeiros, B. D., and C. Mortimore, "OpenID Connect Core 1.0 incorporating errata set 1", Nov 2014, . [OpenID.Registration] Sakimura, N., Bradley, J., and M. Jones, "OpenID Connect Dynamic Client Registration 1.0 incorporating errata set 1", Nov 2014, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966, DOI 10.17487/RFC3966, December 2004, . [RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, DOI 10.17487/RFC5322, October 2008, . [RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, . Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 14] Internet-Draft JWT Response Aug 2019 [RFC7516] Jones, M. and J. Hildebrand, "JSON Web Encryption (JWE)", RFC 7516, DOI 10.17487/RFC7516, May 2015, . [RFC7518] Jones, M., "JSON Web Algorithms (JWA)", RFC 7518, DOI 10.17487/RFC7518, May 2015, . [RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, . [RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May 2015, . [RFC7591] Richer, J., Ed., Jones, M., Bradley, J., Machulak, M., and P. Hunt, "OAuth 2.0 Dynamic Client Registration Protocol", RFC 7591, DOI 10.17487/RFC7591, July 2015, . [RFC7662] Richer, J., Ed., "OAuth 2.0 Token Introspection", RFC 7662, DOI 10.17487/RFC7662, October 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [RFC8414] Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0 Authorization Server Metadata", RFC 8414, DOI 10.17487/RFC8414, June 2018, . 9.2. Informative References [IANA.OAuth.Parameters] IANA, "OAuth Parameters", . Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 15] Internet-Draft JWT Response Aug 2019 Appendix A. Document History [[ To be removed from the final specification ]] -06 o replaced reference to RFC 7159 with reference to RFC 8259 -05 o improved wording for TLS requirement o added RFC 2119 boilerplate o fixed and updated some references -04 o reworked definition of parameters in section 4 o added text on data minimization to security considerations section o added statement regarding TLS to security considerations section -03 o added registration for OpenID Connect Standard Claims to OAuth Token Introspection Response registry -02 o updated references -01 o adapted wording to preclude any accept header except "application/ jwt" if encrypted responses are required o use registered alg value RS256 for default signing algorithm o added text on claims in the token introspection response -00 o initial version of the WG draft o defined default signing algorithm Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 16] Internet-Draft JWT Response Aug 2019 o changed behavior in case resource server is set up for encryption o Added text on token data leakage prevention to the security considerations o moved Security Considerations section forward WG draft -01 o fixed typos in client meta data field names o added OAuth Server Metadata parameters to publish algorithms supported for signing and encrypting the introspection response o added registration of new parameters for OAuth Server Metadata and Client Registration o added explicit request for JWT introspection response o made iss and aud claims mandatory in introspection response o Stylistic and clarifying edits, updates references -00 o initial version Authors' Addresses Torsten Lodderstedt (editor) yes.com AG Email: torsten@lodderstedt.net Vladimir Dzhuvinov Connect2id Ltd. Email: vladimir@connect2id.com Lodderstedt & Dzhuvinov Expires February 29, 2020 [Page 17]