Network Working Group G. Schudel Internet-Draft A. Jain Intended status: Experimental V. Moreno Expires: December 24, 2012 cisco Systems June 22, 2012 LISP MIB draft-ietf-lisp-mib-04 Abstract This document defines managed objects for the Locator/ID Separation Protocol (LISP). These objects provide information useful for monitoring LISP devices, including basic configuration information, LISP status, and operational statistics. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on December 24, 2012. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Schudel, et al. Expires December 24, 2012 [Page 1] Internet-Draft LISP MIB June 2012 Table of Contents 1. Requirements Notation . . . . . . . . . . . . . . . . . . . . 3 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. The Internet-Standard Management Framework . . . . . . . . . . 3 4. Definition of Terms . . . . . . . . . . . . . . . . . . . . . 4 5. LISP MIB Objectives . . . . . . . . . . . . . . . . . . . . . 6 6. Structure of LISP MIB Module . . . . . . . . . . . . . . . . . 6 6.1. Overview of Defined Notifications . . . . . . . . . . . . 6 6.2. Overview of Defined Tables . . . . . . . . . . . . . . . . 7 7. LISP MIB Definitions . . . . . . . . . . . . . . . . . . . . . 8 8. Relationship to Other MIB Modules . . . . . . . . . . . . . . 52 8.1. MIB modules required for IMPORTS . . . . . . . . . . . . . 52 9. Security Considerations . . . . . . . . . . . . . . . . . . . 52 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 52 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 53 11.1. Normative References . . . . . . . . . . . . . . . . . . . 53 11.2. Informative References . . . . . . . . . . . . . . . . . . 53 Appendix A. Open Issues . . . . . . . . . . . . . . . . . . . . . 54 Appendix B. Acknowledgments . . . . . . . . . . . . . . . . . . . 54 Schudel, et al. Expires December 24, 2012 [Page 2] Internet-Draft LISP MIB June 2012 1. Requirements Notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 2. Introduction This draft describes the Management Information Base (MIB) module for use with network management protocols in the Internet community. Specifically, the MIB for managing Locator/ID Separation Protocol (LISP) devices is described. LISP [LISP] specifies a network-based architecture and mechanisms that implement a new semantic for IP addressing using two separate name spaces: Endpoint Identifiers (EIDs), used within sites, and Routing Locators (RLOCs), used on the transit networks that make up the Internet infrastructure. To achieve this separation, LISP defines protocol mechanisms for mapping from EIDs to RLOCs. From a data plane perspective, LISP traffic is handled exclusively at the network layer by devices performing Ingress Tunnel Router (ITR) and Egress Tunnel Router (ETR) LISP functions. Data plane operations performed by these devices are described in [LISP]. Additionally, data plane interworking between legacy (Internet) and LISP sites is implemented by devices performing Proxy ITR (PITR) and Proxy ETR (PETR) functions. The data plane operations of these devices is described in [INTERWORK]. From a control plane perspective, LISP employs mechanisms related to creating, maintaining, and resolving mappings from EIDs to RLOCs. LISP ITRs, ETRs, PITRs, and PETRs perform specific control plane functions, and these control plane operations are described in [LISP]. Additionally, LISP infrastructure devices supporting LISP control plane functionality include Map-Servers and Map-Resolvers, and the control plane operations of these devices are described in [LISP-MS]. Finally, while not specifically required, this document assumes the existence of a database to store and propagate those mappings globally. 3. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally Schudel, et al. Expires December 24, 2012 [Page 3] Internet-Draft LISP MIB June 2012 accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 4. Definition of Terms Endpoint ID (EID): a 32-bit (for IPv4) or 128-bit (for IPv6) value used in the source and destination address fields of the first (inner-most) IP header of a LISP packet. A source EID is allocated to a host from an EID-prefix block associated with the site where the host is located. A host determines a destination address in the same way that it determines a destination address today, for example through a DNS lookup or SIP exchange. Routing Locator (RLOC): a 32-bit (for IPv4) or 128-bit (for IPv6) value used in the source and destination address fields of the second (outer-most) IP header of a LISP packet. RLOC addresses are allocated to an egress tunnel router (ETR) and numbered from topologically-aggregatable blocks assigned to a site at each point to which it attaches to the global Internet. EID-to-RLOC Map-Cache: a short-lived, on-demand table maintained locally in an ITR or PITR that stores, tracks, and is responsible for timing-out and otherwise validating EID-to-RLOC mappings. This table is distinct from the full "database" of EID-to-RLOC mappings in that it is dynamic and relatively small. At a given moment in time, it consists only of entries for those sites to which the ITR or PITR is currently communicating or has communicated with within the configured TTL period. EID-to-RLOC Mapping-Database: a global distributed database that contains all known EID-to-RLOC mappings. Each potential ETR typically contains a small piece of the database consisting of only the EID-to-RLOC mappings for the EID prefix(es) for which the ETR is "authoritative" and the RLOC(s) by which those EID prefix(es) are reachable from the global Internet. Ingress Tunnel Router (ITR): a router that accepts an IP packet with a single IP header (more precisely, an IP packet that does not contain a LISP header), treats this "inner" IP destination address as an EID and performs an EID-to-RLOC mapping lookup, and then prepends an "outer" IP header with one of its own globally- routable RLOCs in the source address field and the RLOC resulting from the mapping lookup in the destination address field. That is, in general an ITR receives an IP packet from site end-systems Schudel, et al. Expires December 24, 2012 [Page 4] Internet-Draft LISP MIB June 2012 on one side and sends a LISP-encapsulated IP packet toward the Internet on the other side. Egress Tunnel Router (ETR): a router that accepts an IP packet where the destination address in the "outer" IP header is one of its own RLOCs, strips the "outer" header, and forwards the packet based on the next IP header found. That is, in general an ETR receives LISP-encapsulated IP packets from the Internet on one side and sends decapsulated IP packets toward site end-systems on the other side. xTR: a term of general reference to an ITR or ETR when direction of data flow is not part of the context description. xTR refers to the router that is the tunnel endpoint and performs both ITR and ETR functionality. For example, "An xTR can be located at the Customer Edge (CE) router," meaning both ITR and ETR functionality is activated at the CE router. Proxy ITR (PITR): a router that acts like an ITR but does so on behalf of non-LISP sites which send packets to destinations at LISP sites. The PITR, also known as a PTR, is defined and described in [INTERWORK]. Proxy ETR (PETR): a router that acts like an ETR but does so on behalf of LISP sites which send packets to destinations at non- LISP sites. The PETR is defined and described in [INTERWORK]. LISP Site: a set of routers in an edge network that are under a single technical administration. LISP routers which reside in the edge network are the demarcation points to separate the edge network from the core network. Map-Server: a LISP network infrastructure component which learns EID-to-RLOC mapping entries from an authoritative source such as an ETR though static configuration, or another out-of-band mechanism. A Map-Server advertises these mappings into the distributed mapping database. Map-Resolver: a LISP network infrastructure component which accepts LISP Encapsulated Map-Requests, typically from an ITR, and quickly determines whether or not the destination IP address is part of the EID namespace. If it is, the Map-Resolver finds the appropriate EID-to-RLOC mapping by consulting the distributed mapping database. If it is not, a Negative Map-Reply is immediately returned. Schudel, et al. Expires December 24, 2012 [Page 5] Internet-Draft LISP MIB June 2012 Map-Request: a LISP Map-Request message type sent by an ITR or PITR to a Map-Resolver when it needs a mapping for an EID, wants to test an RLOC for reachability, or wants to refresh a mapping before TTL expiration. Map-Reply: a LISP Map-Reply message type returned in response to a Map-Request for a destination EID that exists in the mapping database and contains the locator-set and associated policy for the queried EID. Information returned in a Map-Reply is stored in the EID-to-RLOC Map-Cache. Negative Map-Reply: a LISP Map-Reply message type that contains an empty locator-set. Returned in response to a Map-Request if the destination EID does not exist in the mapping database. Typically, this means that the "EID" being requested is an IP address connected to a non-LISP site. Information returned in a Negative Map-Reply is stored in the EID-to-RLOC Map-Cache. 5. LISP MIB Objectives The objectives for defining this LISP MIB module are as follows: o Provide a means for obtaining a list of enabled LISP features and the current status of configuration attributes related to those features. As an example, LISP capabilities which could be enabled include ITR, ETR, PITR, PETR, MS or MR support for IPv4 or IPv6 address families. Other examples include, indicating whether rloc-probing is enabled, and indicating the configured map-cache limit value. o Provide a means for obtaining the current attributes of various LISP tables, such as the EID-to-RLOC policy data contained in the Map-Cache, or the local EID-to-RLOC policy data contained in the Mapping-Database. o Provide a means for obtaining the current operational statistics of various LISP functions, such as the number of packets encapsulated and decapsulated by the device. Other counters of operational interest, depending on LISP function, include things like the current number of map-cache entries, and the total number and rate of map-requests received and sent. 6. Structure of LISP MIB Module 6.1. Overview of Defined Notifications No LISP MIB notifications are defined. Schudel, et al. Expires December 24, 2012 [Page 6] Internet-Draft LISP MIB June 2012 6.2. Overview of Defined Tables The LISP MIB module is composed of the following tables of objects: lispFeatures - This table provides information representing the various lisp features that can be enabled on LISP devices. lispMappingDatabase - This table represents the EID-to-RLOC database that contains the EID-prefix to RLOC mappings configured on an ETR. In general, this table would be representative of all such mappings for a given site that this device belongs to. lispMappingDatabaseLocator - This table represents the set of routing locators contained in the EID-to-RLOC database configured on an ETR. lispMapCache - This table represents the short-lived, on-demand table on an ITR that stores, tracks, and is responsible for timing-out and otherwise validating EID-to-RLOC mappings. lispMapCacheLocator - This table represents the set of locators per EID prefix contained in the map-cache table of an ITR. lispEidRegistration - This table provides the properties of each EID prefix that is registered with this device when configured to be a Map-Server. lispEidRegistrationEtr - This table provides the properties of the different ETRs that send registers, for a given EID prefix, to this device when configured to be a Map-Server. lispEidRegistrationLocator - This table provides the properties of the different locators per EID prefix that is registered with this device when configured to be a Map-Server. lispUseMapServer - This table provides the properties of all Map- Servers that this device is configured to use. lispUseMapResolver - This table provides the properties of all Map- Resolvers that this device is configured to use. lispUseProxyEtr - This table provides the properties of all Proxy ETRs that this device is configured to use. Schudel, et al. Expires December 24, 2012 [Page 7] Internet-Draft LISP MIB June 2012 7. LISP MIB Definitions LISP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2, Unsigned32, Counter64, Integer32, TimeTicks FROM SNMPv2-SMI -- [RFC2578] TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB; -- [IANA] lispMIB MODULE-IDENTITY LAST-UPDATED "201206200000Z" -- 20 June 2012 ORGANIZATION "IETF Locator/ID Separation Protocol (LISP) Working Group" CONTACT-INFO "Email: lisp@ietf.org WG charter: http://www.ietf.org/html.charters/lisp-charter.html" DESCRIPTION "Locator/ID Separation Protocol (LISP) MIB Textual Conventions module. The LISP MIB is intended for management of LISP routers. Copyright (C) The IETF Trust (2012)." REVISION "201206200000Z" -- 20 June 2012 DESCRIPTION "Initial version of the IETF LISP-MIB module" ::= { mib-x xxx } -- -- Textual Conventions -- lispAddressType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "LISP architecture can be applied to a wide variety of address-families. This textual-convention is a generalization for representing addresses that belong to those address-families. For convenience, this document refers to any such address as a lisp address. lispAddressType textual-convention consists of the following four-tuple: 1. IANA Address Family Number: A field of length 2-octets, whose value is of the form following the Schudel, et al. Expires December 24, 2012 [Page 8] Internet-Draft LISP MIB June 2012 assigned AddressFamilyNumbers textual-convention described in [IANA]. The enumerations are listed in [IANA]. Note that this list of address family numbers is maintained by IANA. 2. Length of LISP address: A field of length 1-octet, whose value indicates the octet-length of the next (third) field of this LispAddressType four-tuple. 3. Lisp address: A field of variable length as indicated in the previous (second) field, whose value is an address of the IANA Address Family indicated in the first field of this LispAddressType four-tuple. Note that any of the IANA Address Families can be represented. Particularly when the address family is LISP Canonical Address Format (LCAF) [LCAF] with IANA assigned Address Family Number 16387, then the first octet of this field indicates the LCAF type, and the rest of this field is same as the encoding format of the LISP Canonical Address after the length field, as defined in [LCAF]. 4. Mask-length of address: A variable-length field comprised of the remaining octets of this LispAddressType four-tuple, whose value is the mask-length to be applied to the lisp address specified in the previous (third) field. To illustrate the use of this object, consider the LISP MIB Object below entitled lispMapCacheEntry. This object begins with the following entities: lispMapCacheEntry ::= SEQUENCE { lispMapCacheEidLength INTEGER, lispMapCacheEid LispAddressType, ... [skip] ... Example 1: Suppose that the IPv4 EID prefix stored is 10.10.10.0/24. In this case, the values within lispMapCacheEntry would be: lispMapCacheEidLength = 8 lispMapCacheEid = 1, 4, 10.10.10.0, 24 ... [skip] ... where 8 is the total length in octets of the next object (lispMapCacheEID of type LispAddressType). Then, the value 1 indicates the IPv4 AF (per [IANA]), the value 4 indicates that the AF is 4-octets in length, 10.10.10.0 is the IPv4 address, and the value 24 is the mask-length in bits. Note that the lispMapCacheEidLength Schudel, et al. Expires December 24, 2012 [Page 9] Internet-Draft LISP MIB June 2012 value of 8 is used to compute the length of the fourth (last) field in lispMapCacheEid to be 1 octet - as computed by 8 - (2 + 1 + 4) = 1. Example 2: Suppose that the IPv6 EID prefix stored is 2001:db8:a::/48. In this case, the values within lispMapCacheEntry would be: lispMapCacheEidLength = 20 lispMapCacheEid = 2, 16, 2001:db8:a::, 48 ... [skip] ... where 20 is the total length in octets of the next object (lispMapCacheEID of type LispAddressType). Then, the value 2 indicates the IPv4 AF (per [IANA]), the value 16 indicates that the AF is 16-octets in length, 2001:db8:a:: is the IPv6 address, and the value 48 is the mask-length in bits. Note that the lispMapCacheEidLength value of 20 is used to compute the length of the fourth (last) field in lispMapCacheEid to be 1 octet - as computed by 20 - (2 + 1 + 16) = 1. Example 3: As an example where LCAF is used, suppose that the IPv4 EID prefix stored is 10.10.10.0/24 and it is part of LISP instance id 101. In this case, the values within lispMapCacheEntry would be: lispMapCacheEidLength = 11 lispMapCacheEid = 16387, 7, 2, 101, 1, 10.10.10.0, 24 ... [skip] ... where 11 is the total length in octets of the next object (lispMapCacheEID of type LispAddressType). Then, the value 16387 indicates the LCAF AF (see [IANA]), the value 7 indicates that the LCAF AF is 7-octets in length in this case, 2 indicates that LCAF Type 2 encoding is used (see [LCAF]), 101 gives the instance id, 1 gives the AFI (per [IANA]) for an IPv4 address, 10.10.10.0 is the IPv4 address, and 24 is the mask-length in bits. Note that the lispMapCacheEidLength value of 11 octets is used to compute the length of the last field in lispMapCacheEid to be 1 octet, as computed by 11 - (2 + 1 + 1 + 1 + 1 + 1 + 4) = 1." REFERENCE "[LISP]" SYNTAX OCTET STRING (SIZE (0..1024)) Schudel, et al. Expires December 24, 2012 [Page 10] Internet-Draft LISP MIB June 2012 -- -- Top level components of this MIB. -- lisp OBJECT IDENTIFIER ::= { lispMIB 1 } lispFeaturesTable OBJECT-TYPE SYNTAX SEQUENCE OF LispFeaturesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the various lisp features that can be enabled on lisp devices." REFERENCE "[LISP]" ::= { lisp 1 } lispFeaturesEntry OBJECT-TYPE SYNTAX LispFeaturesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispFeaturesTable." INDEX { lispInstanceID, lispAddressFamily } ::= { lispFeaturesTable 1 } LispFeaturesEntry ::= SEQUENCE { lispFeaturesInstanceID Unsigned32 lispFeaturesAddressFamily AddressFamilyNumbers, lispFeaturesItrEnabled TruthValue, lispFeaturesEtrEnabled TruthValue, lispFeaturesProxyItrEnabled TruthValue, lispFeaturesProxyEtrEnabled TruthValue, lispFeaturesMapServerEnabled TruthValue, lispFeaturesMapResolverEnabled TruthValue, lispFeaturesMapCacheSize Unsigned32, lispFeaturesMapCacheLimit Unsigned32, lispFeaturesEtrMapCacheTtl Unsigned32, lispFeaturesRlocProbeEnabled TruthValue, lispFeaturesEtrAcceptMapDataEnabled TruthValue, lispFeaturesEtrAcceptMapDataVerifyEnabled TruthValue, lispFeaturesMapRequestsIn Counter64, lispFeaturesMapRequestsOut Counter64, lispFeaturesMapRepliesIn Counter64, lispFeaturesMapRepliesOut Counter64, lispFeaturesMapRegistersIn Counter64, Schudel, et al. Expires December 24, 2012 [Page 11] Internet-Draft LISP MIB June 2012 lispFeaturesMapRegistersOut Counter64 } lispFeaturesInstanceID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the Instance ID of the LISP header. An Instance ID in the LISP address encoding helps uniquely identify the AFI-based address space to which a given EID belongs. It's default value is 0." ::= { lispFeaturesEntry 1 } lispFeaturesAddressFamily OBJECT-TYPE SYNTAX AddressFamilyNumbers MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address family number that the lisp device is enabled to lisp process a packet for as a destination address family." ::= { lispFeaturesEntry 2 } lispFeaturesItrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of ITR role on this device (0 = ITR disabled; 1 = ITR enabled)." ::= { lispFeaturesEntry 3 } lispFeaturesEtrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of ETR role on this device (0 = ETR disabled; 1 = ETR enabled)." ::= { lispFeaturesEntry 4 } lispFeaturesProxyItrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION Schudel, et al. Expires December 24, 2012 [Page 12] Internet-Draft LISP MIB June 2012 "Indicates the status of Proxy-ITR role on this device (0 = PITR disabled; 1 = PITR enabled)." ::= { lispFeaturesEntry 5 } lispFeaturesProxyEtrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Proxy-ETR role on this device (0 = PETR disabled; 1 = PETR enabled)." ::= { lispFeaturesEntry 6 } lispFeaturesMapServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Map Server role on this device (0 = MS disabled; 1 = MS enabled)." ::= { lispFeaturesEntry 7 } lispFeaturesMapResolverEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of Map Resolver role on this device (0 = MR disabled; 1 = MR enabled)." ::= { lispFeaturesEntry 8 } lispFeaturesMapCacheSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of EID-to-RLOC map cache on this device." ::= { lispFeaturesEntry 9 } lispFeaturesMapCacheLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum permissible size of EID-to-RLOC map cache on this device." ::= { lispFeaturesEntry 10 } Schudel, et al. Expires December 24, 2012 [Page 13] Internet-Draft LISP MIB June 2012 lispFeaturesEtrMapCacheTtl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time in minutes this device will store the EID-to-RLOC map record in the map cache." ::= { lispFeaturesEntry 11 } lispFeaturesRlocProbeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of rloc-probing feature on this device (0 = disabled; 1 = enabled)." ::= { lispFeaturesEntry 12 } lispFeaturesEtrAcceptMapDataEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of accepting piggybacked mapping data received in a map-request on this device (0 = disabled; 1 = enabled)." ::= { lispFeaturesEntry 13 } lispFeaturesEtrAcceptMapDataVerifyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of verifying accepted piggybacked mapping data received in a map-request on this device (0 = disabled; 1 = enabled)." ::= { lispFeaturesEntry 14 } lispFeaturesMapRequestsIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map requests received by this device for any EID prefix of the given address family." ::= { lispFeaturesEntry 15 } Schudel, et al. Expires December 24, 2012 [Page 14] Internet-Draft LISP MIB June 2012 lispFeaturesMapRequestsOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map requests sent by this device for any EID prefix of the given address family." ::= { lispFeaturesEntry 16 } lispFeaturesMapRepliesIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map replies received by this device for any EID prefix of the given address family." ::= { lispFeaturesEntry 17 } lispFeaturesMapRepliesOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map replies sent by this device for any EID prefix of the given address family." ::= { lispFeaturesEntry 18 } lispFeaturesMapRegistersIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map registers received by this device for any EID prefix of the given address family." ::= { lispFeaturesEntry 19 } lispFeaturesMapRegistersOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of map registers sent by this device for any EID prefix of the given address family." Schudel, et al. Expires December 24, 2012 [Page 15] Internet-Draft LISP MIB June 2012 ::= { lispFeaturesEntry 20 } lispMappingDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMappingDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the EID-to-RLOC mapping database that contains the EID-prefix to RLOC mappings configured on an ETR. In general, this table would be representative of all such mappings for the given lisp site to which this device belongs." REFERENCE "[LISP]" ::= { lisp 2 } lispMappingDatabaseEntry OBJECT-TYPE SYNTAX LispMappingDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMappingDatabaseTable." INDEX { lispMappingDatabaseEidLength, lispMappingDatabaseEid } ::= { lispMappingDatabaseTable 1 } LispMappingDatabaseEntry ::= SEQUENCE { lispMappingDatabaseEidLength Integer32, lispMappingDatabaseEid LispAddressType, lispMappingDatabaseLsb Unsigned32, lispMappingDatabaseEidPartitioned TruthValue, lispMappingDatabaseDecapOctets Counter64, lispMappingDatabaseDecapPackets Counter64, lispMappingDatabaseEncapOctets Counter64, lispMappingDatabaseEncapPackets Counter64 } lispMappingDatabaseEidLength OBJECT-TYPE SYNTAX Integer32 (0..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object gives the octet-length of lispMappingDatabaseEid." ::= { lispMappingDatabaseEntry 1 } Schudel, et al. Expires December 24, 2012 [Page 16] Internet-Draft LISP MIB June 2012 lispMappingDatabaseEid OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EID prefix of the mapping database." ::= { lispMappingDatabaseEntry 2 } lispMappingDatabaseLsb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The locator status bits for this EID prefix." ::= { lispMappingDatabaseEntry 3 } lispMappingDatabaseEidPartitioned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this device is partitioned from the site that contains this EID prefix (0 = not partitioned; 1 = partitioned)." ::= { lispMappingDatabaseEntry 4 } lispMappingDatabaseDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that were decapsulated by this device addressed to a host within this EID-prefix." ::= { lispMappingDatabaseEntry 5 } lispMappingDatabaseDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were decapsulated by this device addressed to a host within this EID-prefix." ::= { lispMappingDatabaseEntry 6 } lispMappingDatabaseEncapOctets OBJECT-TYPE SYNTAX Counter64 Schudel, et al. Expires December 24, 2012 [Page 17] Internet-Draft LISP MIB June 2012 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets, that were encapsulated by this device, whose inner header source address matched this EID prefix." ::= { lispMappingDatabaseEntry 7 } lispMappingDatabaseEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were encapsulated by this device that whose inner header source address matched this EID prefix." ::= { lispMappingDatabaseEntry 8 } lispMappingDatabaseLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMappingDatabaseLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the set of routing locators per EID prefix contained in the EID-to-RLOC database configured on this ETR." REFERENCE "[LISP]" ::= { lisp 3 } lispMappingDatabaseLocatorEntry OBJECT-TYPE SYNTAX LispMappingDatabaseLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMappingDatabaseLocatorTable." INDEX { lispMappingDatabaseEidLength, lispMappingDatabaseEid, lispMappingDatabaseLocatorRlocLength, lispMappingDatabaseLocatorRloc } ::= { lispMappingDatabaseLocatorTable 1 } LispMappingDatabaseLocatorEntry ::= SEQUENCE { lispMappingDatabaseLocatorRlocLength Integer32, lispMappingDatabaseLocatorRloc LispAddressType, lispMappingDatabaseLocatorRlocPriority Integer32, lispMappingDatabaseLocatorRlocWeight Integer32, Schudel, et al. Expires December 24, 2012 [Page 18] Internet-Draft LISP MIB June 2012 lispMappingDatabaseLocatorRlocMPriority Integer32, lispMappingDatabaseLocatorRlocMWeight Integer32, lispMappingDatabaseLocatorRlocState INTEGER, lispMappingDatabaseLocatorRlocLocal INTEGER, lispMappingDatabaseLocatorRlocDecapOctets Counter64, lispMappingDatabaseLocatorRlocDecapPackets Counter64, lispMappingDatabaseLocatorRlocEncapOctets Counter64, lispMappingDatabaseLocatorRlocEncapPackets Counter64 } lispMappingDatabaseLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispMappingDatabaseLocatorRloc, the next object." ::= { lispMappingDatabaseLocatorEntry 1 } lispMappingDatabaseLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is a locator for the given EID prefix in the mapping database." ::= { lispMappingDatabaseLocatorEntry 2 } lispMappingDatabaseLocatorRlocPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the RLOC." ::= { lispMappingDatabaseLocatorEntry 3 } lispMappingDatabaseLocatorRlocWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the RLOC." ::= { lispMappingDatabaseLocatorEntry 4 } lispMappingDatabaseLocatorRlocMPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current Schudel, et al. Expires December 24, 2012 [Page 19] Internet-Draft LISP MIB June 2012 DESCRIPTION "The multicast priority of the RLOC." ::= { lispMappingDatabaseLocatorEntry 5 } lispMappingDatabaseLocatorRlocMWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the RLOC." ::= { lispMappingDatabaseLocatorEntry 6 } lispMappingDatabaseLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1), unreachable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this RLOC as per this device. (0 = RLOC is down; 1 = RLOC is up; 2 = RLOC is unreachable)." ::= { lispMappingDatabaseLocatorEntry 7 } lispMappingDatabaseLocatorRlocLocal OBJECT-TYPE SYNTAX INTEGER { sitelocal (0), siteself (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the RLOC is local to this device (or remote, meaning local to another device in the same lisp site). (0 = RLOC is an address on another device; 1 = RLOC is an address on this device)." ::= { lispMappingDatabaseLocatorEntry 8 } lispMappingDatabaseLocatorRlocDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that were addressed to this RLOC of the EID-prefix and Schudel, et al. Expires December 24, 2012 [Page 20] Internet-Draft LISP MIB June 2012 were decapsulated." ::= { lispMappingDatabaseLocatorEntry 9 } lispMappingDatabaseLocatorRlocDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were addressed to this RLOC of the EID-prefix and were decapsulated." ::= { lispMappingDatabaseLocatorEntry 10 } lispMappingDatabaseLocatorRlocEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that were encapsulated by this device using this RLOC address as the source, and that were sourced by an address of this EID-prefix." ::= { lispMappingDatabaseLocatorEntry 11 } lispMappingDatabaseLocatorRlocEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were encapsulated by this device using this RLOC address as the source, and that were sourced by an address of this EID-prefix." ::= { lispMappingDatabaseLocatorEntry 12 } lispMapCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMapCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the short-lived, on-demand table on an ITR that stores, tracks, and is responsible for timing-out and otherwise validating EID-to-RLOC mappings." REFERENCE "[LISP]" ::= { lisp 4 } Schudel, et al. Expires December 24, 2012 [Page 21] Internet-Draft LISP MIB June 2012 lispMapCacheEntry OBJECT-TYPE SYNTAX LispMapCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMapCacheTable." INDEX { lispMapCacheEidLength, lispMapCacheEid } ::= { lispMapCacheTable 1 } LispMapCacheEntry ::= SEQUENCE { lispMapCacheEidLength Integer32, lispMapCacheEid LispAddressType, lispMapCacheEidUpTime TimeTicks, lispMapCacheEidExpiryTime TimeTicks, lispMapCacheEidState TruthValue, lispMapCacheEidAuthoritative TruthValue, lispMapCacheDecapOctets Counter64, lispMapCacheDecapPackets Counter64, lispMapCacheEncapOctets Counter64, lispMapCacheEncapPackets Counter64 } lispMapCacheEidLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispMapCacheEid, the next object." ::= { lispMapCacheEntry 1 } lispMapCacheEid OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EID prefix in the mapping cache." ::= { lispMapCacheEntry 2 } lispMapCacheEidUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The up time of the EID prefix." ::= { lispMapCacheEntry 3 } Schudel, et al. Expires December 24, 2012 [Page 22] Internet-Draft LISP MIB June 2012 lispMapCacheEidExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the ITR times-out this EID prefix." ::= { lispMapCacheEntry 4 } lispMapCacheEidState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate the activity of this EID prefix (0 = EID prefix is idle; 1 = EID prefix is active)." ::= { lispMapCacheEntry 5 } lispMapCacheEidAuthoritative OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate whether the EID prefix was installed by an authoritative map-reply (0 = EID prefix was not installed by an authoritative map-reply; 1 = EID prefix was installed by an authoritative map-reply)." ::= { lispMapCacheEntry 6 } lispMapCacheDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that were decapsulated by this device and were sourced from a remote host within this EID-prefix." ::= { lispMapCacheEntry 7 } lispMapCacheDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were decapsulated by this device and were sourced Schudel, et al. Expires December 24, 2012 [Page 23] Internet-Draft LISP MIB June 2012 from a remote host within this EID-prefix." ::= { lispMapCacheEntry 8 } lispMapCacheEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that were encapsulated by this device using the given EID-prefix in the map cache." ::= { lispMapCacheEntry 9 } lispMapCacheEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were encapsulated by this device using the given EID-prefix in the map cache." ::= { lispMapCacheEntry 10 } lispMapCacheLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMapCacheLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the set of locators per EID prefix contained in the map-cache table of an ITR." REFERENCE "[LISP]" ::= { lisp 5 } lispMapCacheLocatorEntry OBJECT-TYPE SYNTAX LispMapCacheLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispMapCacheLocatorTable." INDEX { lispMapCacheEidLength, lispMapCacheEid, lispMapCacheLocatorRlocLength, lispMapCacheLocatorRloc } ::= { lispMapCacheLocatorTable 1 } LispMapCacheLocatorEntry ::= SEQUENCE { Schudel, et al. Expires December 24, 2012 [Page 24] Internet-Draft LISP MIB June 2012 lispMapCacheLocatorRlocLength Integer32, lispMapCacheLocatorRloc LispAddressType, lispMapCacheLocatorRlocPriority Integer32, lispMapCacheLocatorRlocWeight Integer32, lispMapCacheLocatorRlocMPriority Integer32, lispMapCacheLocatorRlocMWeight Integer32, lispMapCacheLocatorRlocState INTEGER, lispMapCacheLocatorRlocUpTime TimeTicks, lispMapCacheLocatorRlocLastPriorityChange TimeTicks, lispMapCacheLocatorRlocLastWeightChange TimeTicks, lispMapCacheLocatorRlocLastMPriorityChange TimeTicks, lispMapCacheLocatorRlocLastMWeightChange TimeTicks, lispMapCacheLocatorRlocLastStateChange TimeTicks, lispMapCacheLocatorRlocRtt TimeTicks, lispMapCacheLocatorRlocDecapOctets Counter64, lispMapCacheLocatorRlocDecapPackets Counter64, lispMapCacheLocatorRlocEncapOctets Counter64, lispMapCacheLocatorRlocEncapPackets Counter64 } lispMapCacheLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispMapCacheLocatorRloc, the next object." ::= { lispMapCacheLocatorEntry 1 } lispMapCacheLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The locator for the EID prefix in the mapping cache." ::= { lispMapCacheLocatorEntry 2 } lispMapCacheLocatorRlocPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the RLOC for this EID prefix (0-255) lower more preferred. " ::= { lispMapCacheLocatorEntry 3 } lispMapCacheLocatorRlocWeight OBJECT-TYPE SYNTAX Integer32 Schudel, et al. Expires December 24, 2012 [Page 25] Internet-Draft LISP MIB June 2012 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the RLOC for this EID prefix (0 - 100) percentage. " ::= { lispMapCacheLocatorEntry 4 } lispMapCacheLocatorRlocMPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast priority of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 5 } lispMapCacheLocatorRlocMWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 6 } lispMapCacheLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this RLOC as per this device (0 = RLOC is down; 1 = RLOC is up)." ::= { lispMapCacheLocatorEntry 7 } lispMapCacheLocatorRlocUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The up-time of this RLOC." ::= { lispMapCacheLocatorEntry 8 } lispMapCacheLocatorRlocLastPriorityChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION Schudel, et al. Expires December 24, 2012 [Page 26] Internet-Draft LISP MIB June 2012 "Time since the last change of the unicast priority of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 9 } lispMapCacheLocatorRlocLastWeightChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the unicast weight of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 10 } lispMapCacheLocatorRlocLastMPriorityChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the multicast priority of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 11 } lispMapCacheLocatorRlocLastMWeightChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the multicast weight of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 12 } lispMapCacheLocatorRlocLastStateChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last change of the up/down state of the RLOC for this EID prefix." ::= { lispMapCacheLocatorEntry 13 } lispMapCacheLocatorRlocRtt OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Round trip time of RLOC probe and map-reply for this RLOC address for this prefix." ::= { lispMapCacheLocatorEntry 14 } Schudel, et al. Expires December 24, 2012 [Page 27] Internet-Draft LISP MIB June 2012 lispMapCacheLocatorRlocDecapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that were decapsulated by this device and were sourced from a remote host within this EID-prefix and were encapsulated for this RLOC." ::= { lispMapCacheLocatorEntry 15 } lispMapCacheLocatorRlocDecapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that were decapsulated by this device and were sourced from a remote host within this EID-prefix and were encapsulated for this RLOC." ::= { lispMapCacheLocatorEntry 16 } lispMapCacheLocatorRlocEncapOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of Lisp packets that matched this EID-prefix and were encapsulated using this RLOC address." ::= { lispMapCacheLocatorEntry 17 } lispMapCacheLocatorRlocEncapPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lisp packets that matched this EID prefix and were encapsulated using this RLOC address." ::= { lispMapCacheLocatorEntry 18 } lispEidRegistrationTable OBJECT-TYPE SYNTAX SEQUENCE OF LispEidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of each lisp EID Schudel, et al. Expires December 24, 2012 [Page 28] Internet-Draft LISP MIB June 2012 prefix that is registered with this device when configured to be a Map-Server." REFERENCE "[LISP]" ::= { lisp 6 } lispEidRegistrationEntry OBJECT-TYPE SYNTAX LispEidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispEidRegistrationTable." INDEX { lispEidRegistrationEidLength, lispEidRegistrationEid } ::= { lispEidRegistrationTable 1 } LispEidRegistrationEntry ::= SEQUENCE { lispEidRegistrationEidLength Integer32, lispEidRegistrationEid LispAddressType, lispEidRegistrationSiteName OCTET STRING, lispEidRegistrationSiteDescription OCTET STRING, lispEidRegistrationIsRegistered TruthValue, lispEidRegistrationFirstRegisterTime TimeTicks, lispEidRegistrationLastRegisterTime TimeTicks, lispEidRegistrationLastRegisterSenderLength Integer32, lispEidRegistrationLastRegisterSender LispAddressType, lispEidRegistrationRouteTag Unsigned32 lispEidRegistrationAuthenticationErrors Counter64, lispEidRegistrationRlocsMismatch Counter64 } lispEidRegistrationEidLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationEid, the next object." ::= { lispEidRegistrationEntry 1 } lispEidRegistrationEid OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EID prefix that is being registered." ::= { lispEidRegistrationEntry 2 } lispEidRegistrationSiteName OBJECT-TYPE Schudel, et al. Expires December 24, 2012 [Page 29] Internet-Draft LISP MIB June 2012 SYNTAX OCTET STRING (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site name used by a Map-Server to distinguish different lisp sites that are registering with it." ::= { lispEidRegistrationEntry 3 } lispEidRegistrationSiteDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description for a site name used by a Map-Server. The EID prefix that is being registered belongs to this site." ::= { lispEidRegistrationEntry 4 } lispEidRegistrationIsRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the registration status of the given EID prefix (0 = EID prefix is not registered; 1 = EID prefix is registered)." ::= { lispEidRegistrationEntry 5 } lispEidRegistrationFirstRegisterTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since a first valid register message for the given EID prefix was received by this device." ::= { lispEidRegistrationEntry 6 } lispEidRegistrationLastRegisterTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last valid register message for the given EID prefix was received by this device." ::= { lispEidRegistrationEntry 7 } lispEidRegistrationLastRegisterSenderLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only Schudel, et al. Expires December 24, 2012 [Page 30] Internet-Draft LISP MIB June 2012 STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationLastRegisterSender, the next object." ::= { lispEidRegistrationEntry 8 } lispEidRegistrationLastRegisterSender OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Source address of the last valid register message for the given EID prefix that was received by this device." ::= { lispEidRegistrationEntry 9 } lispEidRegistrationRouteTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the routing table tag assigned to the given EID prefix." ::= { lispEidRegistrationEntry 10 } lispEidRegistrationAuthenticationErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of total authentication errors of map-registers received for the given EID prefix." ::= { lispEidRegistrationEntry 11 } lispEidRegistrationRlocsMismatch OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of total map-registers received that had at least one RLOC that was not in the allowed list of RLOCs for the given EID prefix." ::= { lispEidRegistrationEntry 12 } lispEidRegistrationEtrTable OBJECT-TYPE SYNTAX SEQUENCE OF LispEidRegistrationEtrEntry Schudel, et al. Expires December 24, 2012 [Page 31] Internet-Draft LISP MIB June 2012 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of ETRs that register the given EID prefix with this device when configured to be a Map-Server." REFERENCE "[LISP]" ::= { lisp 7 } lispEidRegistrationEtrEntry OBJECT-TYPE SYNTAX LispEidRegistrationEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispEidRegistrationTable." INDEX { lispEidRegistrationEidLength, lispEidRegistrationEid, lispEidRegistrationEtrSenderLength, lispEidRegistrationEtrSender } ::= { lispEidRegistrationEtrTable 1 } LispEidRegistrationEtrEntry ::= SEQUENCE { lispEidRegistrationEtrSenderLength Integer32, lispEidRegistrationEtrSender LispAddressType, lispEidRegistrationEtrLastRegisterTime TimeTicks, lispEidRegistrationEtrTtl TimeTicks, lispEidRegistrationEtrProxyReply TruthValue, lispEidRegistrationEtrWantsMapNotify TruthValue } lispEidRegistrationEtrSenderLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationEtrSender, the next object." ::= { lispEidRegistrationEtrEntry 1 } lispEidRegistrationEtrSender OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Source address of the ETR that is sending valid register messages for this EID prefix to this device." ::= { lispEidRegistrationEtrEntry 2 } Schudel, et al. Expires December 24, 2012 [Page 32] Internet-Draft LISP MIB June 2012 lispEidRegistrationEtrLastRegisterTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last valid register message from this ETR for the given EID prefix was received by this device." ::= { lispEidRegistrationEtrEntry 3 } lispEidRegistrationEtrTtl OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current "Time in minutes of the Record TTL of the registering ETR device for this EID prefix." ::= { lispEidRegistrationEtrEntry 4 } lispEidRegistrationEtrProxyReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates proxy-replying status of the registering ETR for this EID prefix. (0 = Map-Server should not proxy-reply; 1 = Map-Server may proxy-reply)." ::= { lispEidRegistrationEtrEntry 5 } lispEidRegistrationEtrWantsMapNotify OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the EID prefix wants Map-Notifications (0 = EID prefix does not want Map-Notifications; 1 = EID prefix wants Map-Notifications)." ::= { lispEidRegistrationEtrEntry 6 } lispEidRegistrationLocatorTable OBJECT-TYPE SYNTAX SEQUENCE OF LispEidRegistrationLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of all locators per lisp site that are served by this device when configured to be a Map-Server." REFERENCE "[LISP]" Schudel, et al. Expires December 24, 2012 [Page 33] Internet-Draft LISP MIB June 2012 ::= { lisp 8 } lispEidRegistrationLocatorEntry OBJECT-TYPE SYNTAX LispEidRegistrationLocatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispEidRegistrationLocatorTable." INDEX { lispEidRegistrationEidLength, lispEidRegistrationEid, lispEidRegistrationEtrSenderLength, lispEidRegistrationEtrSender, lispEidRegistrationLocatorRlocLength, lispEidRegistrationLocatorRloc } ::= { lispEidRegistrationLocatorTable 1 } LispEidRegistrationLocatorEntry ::= SEQUENCE { lispEidRegistrationLocatorRlocLength Integer32, lispEidRegistrationLocatorRloc LispAddressType, lispEidRegistrationLocatorRlocState INTEGER, lispEidRegistrationLocatorIsLocal TruthValue, lispEidRegistrationLocatorPriority Integer32, lispEidRegistrationLocatorWeight Integer32, lispEidRegistrationLocatorMPriority Integer32, lispEidRegistrationLocatorMWeight Integer32 } lispEidRegistrationLocatorRlocLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispEidRegistrationLocatorRloc, the next object." ::= { lispEidRegistrationLocatorEntry 1 } lispEidRegistrationLocatorRloc OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The locator of the given EID prefix being registered by the given ETR with this device." ::= { lispEidRegistrationLocatorEntry 2 } lispEidRegistrationLocatorRlocState OBJECT-TYPE SYNTAX INTEGER { Schudel, et al. Expires December 24, 2012 [Page 34] Internet-Draft LISP MIB June 2012 down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The cached state of this RLOC received in map-register from the ETR by the device, in the capacity of a Map-Server. Value 0 refers to down, value 1 refers to up." ::= { lispEidRegistrationLocatorEntry 3 } lispEidRegistrationLocatorIsLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the given locator is local to the registering ETR. Value 1 implies local, value 0 implies not local." ::= { lispEidRegistrationLocatorEntry 4 } lispEidRegistrationLocatorRlocPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the RLOC for this EID prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 5 } lispEidRegistrationLocatorRlocWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the RLOC for this EID prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 6 } lispEidRegistrationLocatorRlocMPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast priority of the RLOC for this EID prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 7 } Schudel, et al. Expires December 24, 2012 [Page 35] Internet-Draft LISP MIB June 2012 lispEidRegistrationLocatorRlocMWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the RLOC for this EID prefix in the register message sent by the given ETR." ::= { lispEidRegistrationLocatorEntry 8 } lispUseMapServerTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMapServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of the map-server(s) with which this device is configured to register." REFERENCE "[LISP]" ::= { lisp 9 } lispUseMapServerEntry OBJECT-TYPE SYNTAX LispMapServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispUseMapServerTable." INDEX { lispUseMapServerAddressLength, lispUseMapServerAddress } ::= { lispUseMapServerTable 1 } LispMapServersEntry ::= SEQUENCE { lispUseMapServerAddressLength Integer32, lispUseMapServerAddress LispAddressType, lispUseMapServerState INTEGER } lispUseMapServerAddressLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispUseMapServerAddress, the next object." ::= { lispUseMapServerEntry 1 } lispUseMapServerAddress OBJECT-TYPE SYNTAX LispAddressType Schudel, et al. Expires December 24, 2012 [Page 36] Internet-Draft LISP MIB June 2012 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of Map-Server configured on this device." ::= { lispUseMapServerEntry 2 } lispUseMapServerState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Map-Server configured on this device (0 = Map-Server is down; 1 = Map-Server is up)." ::= { lispUseMapServerEntry 3 } lispUseMapResolverTable OBJECT-TYPE SYNTAX SEQUENCE OF LispMapResolversEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of the map-resolver(s) this device is configured to use." REFERENCE "[LISP]" ::= { lisp 10 } lispUseMapResolverEntry OBJECT-TYPE SYNTAX LispMapResolversEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispUseMapResolverTable." INDEX { lispUseMapResolverAddressLength, lispUseMapResolverAddress } ::= { lispUseMapResolverTable 1 } LispMapResolversEntry ::= SEQUENCE { lispUseMapResolverAddressLength Integer32, lispUseMapResolverAddress LispAddressType, lispUseMapResolverState INTEGER } lispUseMapResolverAddressLength OBJECT-TYPE Schudel, et al. Expires December 24, 2012 [Page 37] Internet-Draft LISP MIB June 2012 SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispUseMapResolverAddress, the next object." ::= { lispUseMapResolverEntry 1 } lispUseMapResolverAddress OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of map-resolver configured on this device." ::= { lispUseMapResolverEntry 2 } lispUseMapResolverState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Map-Resolver configured on this device (0 = Map-Resolver is down; 1 = Map-Resolver is up)." ::= { lispUseMapResolverEntry 3 } lispUseProxyEtrTable OBJECT-TYPE SYNTAX SEQUENCE OF LispUseProxyEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the properties of all Proxy ETRs that this device is configured to use." REFERENCE "[LISP]" ::= { lisp 11 } lispUseProxyEtrEntry OBJECT-TYPE SYNTAX LispUseProxyEtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the lispUseProxyEtrTable." INDEX { lispUseProxyEtrAddressLength, lispUseProxyEtrAddress } Schudel, et al. Expires December 24, 2012 [Page 38] Internet-Draft LISP MIB June 2012 ::= { lispUseProxyEtrTable 1 } LispUseProxyEtrEntry ::= SEQUENCE { lispUseProxyEtrAddressLength Integer32, lispUseProxyEtrAddress LispAddressType, lispUseProxyEtrPriority Integer32, lispUseProxyEtrWeight Integer32, lispUseProxyEtrMPriority Integer32, lispUseProxyEtrMWeight Integer32, lispUseProxyEtrState INTEGER } lispUseProxyEtrAddressLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to get the octet-length of lispUseProxyEtrAddress, the next object." ::= { lispUseProxyEtrEntry 1 } lispUseProxyEtrAddress OBJECT-TYPE SYNTAX LispAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of Proxy ETR configured on this device." ::= { lispUseProxyEtrEntry 2 } lispUseProxyEtrPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast priority of the PETR locator." ::= { lispUseProxyEtrEntry 3 } lispUseProxyEtrWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unicast weight of the PETR locator." ::= { lispUseProxyEtrEntry 4 } lispUseProxyEtrMPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only Schudel, et al. Expires December 24, 2012 [Page 39] Internet-Draft LISP MIB June 2012 STATUS current DESCRIPTION "The multicast priority of the PETR locator." ::= { lispUseProxyEtrEntry 5 } lispUseProxyEtrMWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast weight of the PETR locator." ::= { lispUseProxyEtrEntry 6 } lispUseProxyEtrState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Proxy ETR configured on this device (0 = Proxy ETR is down; 1 = Proxy ETR is up)." ::= { lispUseProxyEtrEntry 7 } -- -- Conformance Information -- lispMIBConformance OBJECT IDENTIFIER ::= { lispMIB 2 } lispMIBCompliances OBJECT IDENTIFIER ::= { lispMIBConformance 1 } lispMIBGroups OBJECT IDENTIFIER ::= { lispMIBConformance 2 } -- -- Compliance Statements -- lispMIBComplianceEtr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP ETRs." MODULE -- this module MANDATORY-GROUPS { lispMIBEtrGroup } GROUP lispMIBItrGroup DESCRIPTION Schudel, et al. Expires December 24, 2012 [Page 40] Internet-Draft LISP MIB June 2012 "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." ::= { lispMIBCompliances 1 } Schudel, et al. Expires December 24, 2012 [Page 41] Internet-Draft LISP MIB June 2012 lispMIBComplianceItr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP ITRs." MODULE -- this module MANDATORY-GROUPS { lispMIBItrGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup Schudel, et al. Expires December 24, 2012 [Page 42] Internet-Draft LISP MIB June 2012 DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." ::= { lispMIBCompliances 2 } lispMIBCompliancePetr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Proxy-ETRs." MODULE -- this module MANDATORY-GROUPS { lispMIBPetrGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." Schudel, et al. Expires December 24, 2012 [Page 43] Internet-Draft LISP MIB June 2012 GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." ::= { lispMIBCompliances 3 } lispMIBCompliancePitr MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Proxy-ITRs." MODULE -- this module MANDATORY-GROUPS { lispMIBPitrGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." Schudel, et al. Expires December 24, 2012 [Page 44] Internet-Draft LISP MIB June 2012 GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." ::= { lispMIBCompliances 4 } lispMIBComplianceMapServer MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Map Servers." MODULE -- this module MANDATORY-GROUPS { lispMIBMapServerGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." Schudel, et al. Expires December 24, 2012 [Page 45] Internet-Draft LISP MIB June 2012 GROUP lispMIBMapResolverGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." ::= { lispMIBCompliances 5 } lispMIBComplianceMapResolver MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for LISP Map Resolvers." MODULE -- this module MANDATORY-GROUPS { lispMIBMapResolverGroup } GROUP lispMIBEtrGroup DESCRIPTION "This group is optional." GROUP lispMIBItrGroup DESCRIPTION "This group is optional." Schudel, et al. Expires December 24, 2012 [Page 46] Internet-Draft LISP MIB June 2012 GROUP lispMIBPetrGroup DESCRIPTION "This group is optional." GROUP lispMIBPitrGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerGroup DESCRIPTION "This group is optional." GROUP lispMIBEtrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBItrExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBMapServerExtendedGroup DESCRIPTION "This group is optional." GROUP lispMIBTuningParametersGroup DESCRIPTION "This group is optional." GROUP lispMIBEncapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDecapStatisticsGroup DESCRIPTION "This group is optional." GROUP lispMIBDiagnosticsGroup DESCRIPTION "This group is optional." ::= { lispMIBCompliances 6 } -- -- Units of Conformance -- lispMIBEtrGroup OBJECT-GROUP Schudel, et al. Expires December 24, 2012 [Page 47] Internet-Draft LISP MIB June 2012 OBJECTS { lispFeaturesEtrEnabled, lispMappingDatabaseLsb, lispMappingDatabaseLocatorRlocPriority, lispMappingDatabaseLocatorRlocWeight, lispMappingDatabaseLocatorRlocMPriority, lispMappingDatabaseLocatorRlocMWeight, lispMappingDatabaseLocatorRlocState, lispMappingDatabaseLocatorRlocLocal, lispUseMapServerState } STATUS current DESCRIPTION "A collection of objects to support basic management of LISP ETRs." ::= { lispMIBGroups 1 } lispMIBItrGroup OBJECT-GROUP OBJECTS { lispFeaturesItrEnabled, lispMapCacheSize, lispMappingDatabaseLsb, lispMapCacheLocatorRlocPriority, lispMapCacheLocatorRlocWeight, lispMapCacheLocatorRlocMPriority, lispMapCacheLocatorRlocMWeight, lispMapCacheLocatorRlocState, lispMapCacheEidUpTime, lispMapCacheEidExpiryTime, lispUseMapResolverState, lispUseProxyEtrState } STATUS current DESCRIPTION "A collection of objects to support basic management of LISP ITRs." ::= { lispMIBGroups 2 } lispMIBPetrGroup OBJECT-GROUP OBJECTS { lispFeaturesProxyEtrEnabled } STATUS current DESCRIPTION "A collection of objects to support basic management of LISP Proxy-ETRs." ::= { lispMIBGroups 3 } lispMIBPitrGroup OBJECT-GROUP OBJECTS { lispFeaturesProxyItrEnabled } Schudel, et al. Expires December 24, 2012 [Page 48] Internet-Draft LISP MIB June 2012 STATUS current DESCRIPTION "A collection of objects to support basic management of LISP Proxy-ITRs." ::= { lispMIBGroups 4 } lispMIBMapServerGroup OBJECT-GROUP OBJECTS { lispFeaturesMapServerEnabled, lispEidRegistrationEidRegisterState, lispEidRegistrationLocatorRlocState, lispEidRegistrationLocatorRlocPriority, lispEidRegistrationLocatorRlocWeight, lispEidRegistrationLocatorRlocMPriority, lispEidRegistrationLocatorRlocMWeight, lispEidRegistrationLocatorRlocRegisterState } STATUS current DESCRIPTION "A collection of objects to support basic management of LISP Map Servers." ::= { lispMIBGroups 5 } lispMIBMapResolverGroup OBJECT-GROUP OBJECTS { lispFeaturesMapResolverEnabled } STATUS current DESCRIPTION "A collection of objects to support basic management of LISP Map Resolvers." ::= { lispMIBGroups 6 } lispMIBEtrExtendedGroup OBJECT-GROUP OBJECTS { lispFeaturesRlocProbeEnabled, lispFeaturesEtrAcceptMapDataEnabled, lispFeaturesEtrAcceptMapDataVerifyEnabled, lispMappingDatabaseEidPartitioned } STATUS current DESCRIPTION "A collection of objects to support management of LISP features and properties on ETRs." ::= { lispMIBGroups 7 } lispMIBItrExtendedGroup OBJECT-GROUP OBJECTS { lispFeaturesRlocProbeEnabled, lispMapCacheEidState, lispMapCacheEidAuthoritative, Schudel, et al. Expires December 24, 2012 [Page 49] Internet-Draft LISP MIB June 2012 lispMapCacheLocatorRlocUpTime, lispMapCacheLocatorRlocLastPriorityChange, lispMapCacheLocatorRlocLastWeightChange, lispMapCacheLocatorRlocLastMPriorityChange, lispMapCacheLocatorRlocLastMWeightChange, lispMapCacheLocatorRlocLastStateChange, lispMapCacheLocatorRlocRtt } STATUS current DESCRIPTION "A collection of objects to support management of LISP features and properties on ITRs." ::= { lispMIBGroups 8 } lispMIBMapServerExtendedGroup OBJECT-GROUP OBJECTS { lispEidRegistrationDescription, lispEidRegistrationEidFirstRegisterTime, lispEidRegistrationEidRegisterSenderLength, lispEidRegistrationEidRegisterSender, lispEidRegistrationEidRouteTag, lispEidRegistrationEidWantsMapNotifies, lispEidRegistrationLocatorRlocFirstRegisterTime, lispEidRegistrationLocatorRlocLastRegisterTime, lispEidRegistrationLocatorRlocProxyReply } STATUS current DESCRIPTION "A collection of objects to support management of LISP features and properties on Map Servers." ::= { lispMIBGroups 9 } lispMIBTuningParametersGroup OBJECT-GROUP OBJECTS { lispFeaturesMapCacheLimit, lispFeaturesEtrMapCacheTtl } STATUS current DESCRIPTION "A collection of writeable objects used to configure LISP behavior and to tune performance." ::= { lispMIBGroups 10 } lispMIBEncapStatisticsGroup OBJECT-GROUP OBJECTS { lispMappingDatabaseEncapOctets, lispMappingDatabaseEncapPackets, lispMappingDatabaseLocatorRlocEncapOctets, lispMappingDatabaseLocatorRlocEncapPackets, lispMapCacheEncapOctets, lispMapCacheEncapPackets, Schudel, et al. Expires December 24, 2012 [Page 50] Internet-Draft LISP MIB June 2012 lispMapCacheLocatorRlocEncapOctets, lispMapCacheLocatorRlocEncapPackets } STATUS current DESCRIPTION "A collection of LISP encapsulation statistics by the device." ::= { lispMIBGroups 11 } lispMIBDecapStatisticsGroup OBJECT-GROUP OBJECTS { lispMappingDatabaseDecapOctets, lispMappingDatabaseDecapPackets, lispMappingDatabaseLocatorRlocDecapOctets, lispMappingDatabaseLocatorRlocDecapPackets, lispMapCacheDecapOctets, lispMapCacheDecapPackets, lispMapCacheLocatorRlocDecapOctets, lispMapCacheLocatorRlocDecapPackets } STATUS current DESCRIPTION "A collection of LISP decapsulation statistics by the device." ::= { lispMIBGroups 12 } lispMIBDiagnosticsGroup OBJECT-GROUP OBJECTS { lispFeaturesMapRequestsIn, lispFeaturesMapRequestsOut, lispFeaturesMapRepliesIn, lispFeaturesMapRepliesOut, lispFeaturesMapRegistersIn, lispFeaturesMapRegistersOut, lispEidRegistrationEidAuthenticationErrors, lispEidRegistrationEidRegisterRlocsMismatch } STATUS current DESCRIPTION "Objects providing additional diagnostics related to a LISP router." ::= { lispMIBGroups 13 } END Schudel, et al. Expires December 24, 2012 [Page 51] Internet-Draft LISP MIB June 2012 8. Relationship to Other MIB Modules 8.1. MIB modules required for IMPORTS The LISP MIB imports the textual-convention AddressFamilyNumbers from the IANA-ADDRESS-FAMILY-NUMBERS-MIB [IANA]. 9. Security Considerations There are no management objects defined in this MIB module that have a MAX-ACCESS clause of read-write and/or read-create. As long as these MIB modules are implemented correctly, there are no risks that any management objects of this MIB module can modify device settings via direct SNMP SET operations. There are no readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) that are considered sensitive. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of these MIB modules is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 10. IANA Considerations LISP is an experimental protocol and the LISP MIB is an experimental MIB. No IANA actions are required by this document. 11. References Schudel, et al. Expires December 24, 2012 [Page 52] Internet-Draft LISP MIB June 2012 11.1. Normative References [INTERWORK] Lewis, D., Meyer, D., Farinacci, D., and V. Fuller, "Interworking LISP with IPv4 and IPv6", draft-ietf-lisp-interworking-06.txt (work in progress), March 2012. [LISP] Farinacci, D., Fuller, V., Meyer, D., and D. Lewis, "Locator/ID Separation Protocol (LISP)", draft-ietf-lisp-23.txt (work in progress), May 2012. [LISP-MS] Farinacci, D. and V. Fuller, "LISP Map Server", draft-ietf-lisp-ms-16.txt (work in progress), March 2012. [RFC1035] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2404] Madson, C. and R. Glenn, "The Use of HMAC-SHA-1-96 within ESP and AH", RFC 2404, November 1998. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC4634] Eastlake, D. and T. Hansen, "US Secure Hash Algorithms (SHA and HMAC-SHA)", RFC 4634, July 2006. 11.2. Informative References [IANA] "IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS", . [LCAF] Farinacci, D., Meyer, D., and J. Snijders, "LISP Canonical Address Format", draft-farinacci-lisp-lcaf-07.txt (work in progress), Schudel, et al. Expires December 24, 2012 [Page 53] Internet-Draft LISP MIB June 2012 March 2012. [LISP-MCAST] Farinacci, D., Meyer, D., Zwiebel, J., and S. Venaas, "LISP for Multicast Environments", draft-ietf-lisp-multicast-14.txt (work in progress), February 2012. [LISP-MN] Farinacci, D., Fuller, V., Meyer, D., and D. Lewis, "LISP Mobile Node Architecture", draft-meyer-lisp-mn-07.txt (work in progress), April 2012. [RFC2784] Farinacci, D., Li, T., Hanks, S., Meyer, D., and P. Traina, "Generic Routing Encapsulation (GRE)", RFC 2784, March 2000. [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002. [RFC4271] Rekhter, Y., Li, T., and S. Hares, "A Border Gateway Protocol 4 (BGP-4)", RFC 4271, January 2006. [RFC4760] Bates, T., Chandra, R., Katz, D., and Y. Rekhter, "Multiprotocol Extensions for BGP-4", RFC 4760, January 2007. Appendix A. Open Issues Open issues for the LISP MIB include the following: 1. This LISP MIB draft does not include LISP Multicast considerations. Multicast considerations will be added in a separate LISP Multicast MIB draft. Appendix B. Acknowledgments A thank you is owed to Dino Farinacci for his inputs and review comments on the initial versions of this draft. In addition, the authors would like to gratefully acknowledge several others who have reviewed and commented on this draft. They include: Darrel Lewis, Isidor Kouvelas, Jesper Skriver, Selina Heimlich, and Parna Agrawal. Schudel, et al. Expires December 24, 2012 [Page 54] Internet-Draft LISP MIB June 2012 Authors' Addresses Gregg Schudel cisco Systems Tasman Drive San Jose, CA 95134 USA EMail: gschudel@cisco.com Amit Jain cisco Systems Tasman Drive San Jose, CA 95134 USA EMail: amijain@cisco.com Victor Moreno cisco Systems Tasman Drive San Jose, CA 95134 USA EMail: vimoreno@cisco.com Schudel, et al. Expires December 24, 2012 [Page 55]