Lemonade Working Group B. Leiba Internet-Draft Huawei Technologies Intended status: Standards Track July 11, 2009 Expires: January 12, 2010 Support for Sieve in Internet Message Access Protocol (IMAP4) draft-ietf-lemonade-imap-sieve-06 Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on January 12, 2010. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Leiba Expires January 12, 2010 [Page 1] Internet-Draft IMAP-Sieve July 2009 Abstract Sieve defines an email filtering language that can, in principle, plug into any point in the processing of an email message. As defined in the base specification, it plugs into mail delivery. This document defines how Sieve can plug into points in the IMAP protocol where messages are created or changed, adding the option of user- defined or installation-defined filtering (or, with Sieve extensions, features such as notifications). Leiba Expires January 12, 2010 [Page 2] Internet-Draft IMAP-Sieve July 2009 Note This document defines extensions to IMAP and Sieve. For now, it is the work of the Lemonade Working Group (Enhancements to Internet email to support diverse service environments), but it will be moved to the Sieve working group at some point. 1. Discussion of this document should be taken to the Sieve mailing list at mailto:ietf-mta-filters@imc.org 2. Subscription requests can be sent to mailto:ietf-mta-filters-request@imc.org?body=subscribe (send an email message with the word "subscribe" in the body). 3. A WWW archive of back messages is available at http://www.ietf.org/mail-archive/web/sieve/index.html 4. Older messages, which were posted to the lemonade mailing list, are archived at http://www.ietf.org/mail-archive/web/lemonade/index.html Leiba Expires January 12, 2010 [Page 3] Internet-Draft IMAP-Sieve July 2009 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . 6 1.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.2. Conventions used in this document . . . . . . . . . . . . 6 2. The IMAP "IMAPSieve" Extension . . . . . . . . . . . . . . 7 2.1. The "IMAPSieve" Capability String . . . . . . . . . . . . 7 2.2. Existing IMAP Functions Affected by IMAPSieve . . . . . . 7 2.2.1. The IMAP APPEND Command . . . . . . . . . . . . . . . . . 7 2.2.2. The IMAP MULTIAPPEND Command . . . . . . . . . . . . . . . 7 2.2.3. The IMAP COPY Command . . . . . . . . . . . . . . . . . . 8 2.2.4. Changes to IMAP Message Flags . . . . . . . . . . . . . . 8 2.2.5. New or Changed IMAP Message Annotations . . . . . . . . . 8 2.3. New Functions Defined by IMAPSieve . . . . . . . . . . . . 9 2.3.1. Changes to Metadata . . . . . . . . . . . . . . . . . . . 9 3. Applicable Sieve Actions and Interactions . . . . . . . . 11 3.1. The Implicit Keep . . . . . . . . . . . . . . . . . . . . 11 3.2. The Keep Action . . . . . . . . . . . . . . . . . . . . . 11 3.3. The Fileinto Action . . . . . . . . . . . . . . . . . . . 11 3.4. The Redirect Action . . . . . . . . . . . . . . . . . . . 12 3.5. The Reject Action . . . . . . . . . . . . . . . . . . . . 12 3.6. The Discard Action . . . . . . . . . . . . . . . . . . . . 12 3.7. The Notify Action . . . . . . . . . . . . . . . . . . . . 13 3.8. The Addheader and Deleteheader Actions . . . . . . . . . . 13 3.9. The Setflag, Deleteflag, and Removeflag Actions . . . . . 13 3.10. The Vacation Action . . . . . . . . . . . . . . . . . . . 14 3.11. Spamtest . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.12. New Sieve Environment Item: cause . . . . . . . . . . . . 14 3.13. New Sieve Environment Item: mailbox . . . . . . . . . . . 14 3.14. New Sieve Environment Item: changedflags . . . . . . . . . 15 3.15. New Sieve Environment Item: changedannotations . . . . . . 15 3.16. Interaction With Sieve Tests (Comparisons) . . . . . . . . 15 4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 16 5. Security Considerations . . . . . . . . . . . . . . . . . 17 6. IANA Considerations . . . . . . . . . . . . . . . . . . . 18 6.1. Registration of imapsieve extension . . . . . . . . . . . 18 6.2. Registration of environment item: cause . . . . . . . . . 18 6.3. Registration of environment item: mailbox . . . . . . . . 18 6.4. Registration of environment item: changedflags . . . . . . 19 6.5. Registration of environment item: changedannotations . . . 19 6.6. Registration of IMAP METADATA mailbox entry name . . . . . 20 6.7. Registration of IMAP METADATA server entry name . . . . . 20 Leiba Expires January 12, 2010 [Page 4] Internet-Draft IMAP-Sieve July 2009 7. References . . . . . . . . . . . . . . . . . . . . . . . . 22 7.1. Normative References . . . . . . . . . . . . . . . . . . . 22 7.2. Non-Normative References . . . . . . . . . . . . . . . . . 22 Author's Address . . . . . . . . . . . . . . . . . . . . . 24 Leiba Expires January 12, 2010 [Page 5] Internet-Draft IMAP-Sieve July 2009 1. Introduction 1.1. Overview Some applications have a need to apply [Sieve] filters in situations other than initial mail delivery. This is especially true in diverse service environments, such as when the client is sporadically connected, is connected through a high-latency or high-cost channel, or is on a limited-function device. For such clients, it may be very important, for higher performance and reliability, to take advantage of server capabilities, including those provided by Sieve filtering (and Sieve extensions, such as [Notify]). This specification defines extensions to [IMAP] to support the invocation of Sieve scripts at times when the IMAP server creates new messages, or modifies existing ones. It also defines how Sieve scripts will process these invocations. Support for IMAPSieve requires support for [Metadata] as well, since the latter is used to associate scripts with IMAP mailboxes. [[anchor1: General note: Sieve was designed to work at final delivery, and makes many assumptions about the context. Will those assumptions break this environment without our realizing it fully?]] [[anchor2: Note about identity: We might want to use Sieve to impose fine-grained access controls. In final delivery, there's no identity for the "filer". Here, there is: the logged-in IMAP user. How do we get at that identity?]] 1.2. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [Keywds]. Leiba Expires January 12, 2010 [Page 6] Internet-Draft IMAP-Sieve July 2009 2. The IMAP "IMAPSieve" Extension 2.1. The "IMAPSieve" Capability String An IMAP server advertises support for this extension through the capability string "IMAPSieve" (the string is not case-sensitive, and is shown here with this capitalization for readability). A server that advertises IMAPSieve is claiming to be in compliance with this specification in all aspects. Implementations that support IMAPSieve MUST also support [Environment], because the latter defines an important way for Sieve scripts to test the conditions under which they have been invoked. Notwithstanding this requirement, scripts that use IMAPSieve must include BOTH capability strings in their required lists. 2.2. Existing IMAP Functions Affected by IMAPSieve The subsections below describe in detail the IMAP commands and situations on which IMAPSieve has an effect. Not all Sieve actions make sense in the case of messages affected by IMAP commands. See Section 3 for details. It's important to note that since the base Sieve specification (see [Sieve]) and its extensions define functions for scripts that are invoked during initial mail delivery, those function definitions are necessarily tailored to and limited by that context. This document extends those function definitions for use during IMAP events. By nature of that, Sieve functions, in this extended context, may behave somewhat differently, though their extended behaviour will still be consistent with the functions' goals. If more than one message is affected at the same time, each message triggers the execution of a Sieve script separately. The scripts MAY be run in parallel. 2.2.1. The IMAP APPEND Command A message may be added to a mailbox through the IMAP APPEND command. In a server that advertises IMAPSieve, new messages added in this way MUST trigger the execution of a Sieve script, subject to the settings defined through Metadata (see Section 2.3.1). 2.2.2. The IMAP MULTIAPPEND Command If the IMAP server supports the IMAP [MultiAppend] extension, messages may be added to a mailbox through the IMAP MULTIAPPEND command. In a server that advertises IMAPSieve, new messages added Leiba Expires January 12, 2010 [Page 7] Internet-Draft IMAP-Sieve July 2009 in this way MUST trigger the execution of a Sieve script, as with the APPEND command, also subject to the settings defined through Metadata. 2.2.3. The IMAP COPY Command One or more messages may be added to a mailbox through the IMAP COPY command. In a server that advertises IMAPSieve, new messages added in this way MUST trigger the execution of a Sieve script, subject to the settings defined through Metadata. 2.2.4. Changes to IMAP Message Flags One or more existing messages can have their flags changed in a number of ways, including: o The FETCH command (may cause the \Seen flag to be set). o The STORE command (may cause the \Answered, \Deleted, \Draft, \Flagged, and \Seen flags to be set or reset, and may cause keywords to be set or reset). o The invocation of a Sieve script on an existing message, where the Sieve implementation supports the [IMAP4Flags] extension and the script uses one of the actions defined in that extension. In a server that advertises IMAPSieve, messages whose flags are changed in any way (except as explained in the next sentence) MUST trigger the execution of a Sieve script, subject to the settings defined through Metadata. The exception is that in order to avoid script loops, flag changes that are made as a result of a script that was itself invoked because of flag changes SHOULD NOT result in another script invocation. In any case, implementations MUST take steps to avoid such loops. For flag-change events, the Sieve script will see the message flags as they are AFTER the changes. 2.2.5. New or Changed IMAP Message Annotations [[anchor3: Sieve has no way to get the annotations, so is there really value in being told about annotation changes here? Maybe push that into a sieve-annotations extension later.]] If the IMAP server supports the [Annotate] extension, one or more existing messages can have annotations added or changed through the ANNOTATE command. In a server that advertises IMAPSieve, messages getting new or changed annotations MUST trigger the execution of a Leiba Expires January 12, 2010 [Page 8] Internet-Draft IMAP-Sieve July 2009 Sieve script, subject to the settings defined through Metadata. For annotation-change events, the Sieve script will see the message annotations as they are AFTER the changes. 2.3. New Functions Defined by IMAPSieve 2.3.1. Changes to Metadata Support for IMAPSieve requires support for [Metadata] as well, since the latter is used to associate scripts with IMAP mailboxes. When an applicable event occurs on an IMAP mailbox, if there is an IMAP metadata entry named "/IMAPSieve/Script" for the mailbox, that entry is used. If there is not, but there is an IMAP metadata entry named "/IMAPSieve/Script" for the server, that entry is used (providing a way to define a global script for all mailboxes on a server). If neither entry exists, then no script will be invoked. If an "/IMAPSieve/Script" metadata entry was selected above, the shared value of that metadata name (its "value.shared" attribute) MUST be the name of the Sieve script that will be invoked in response to the IMAP event OR the name of another metadata entry, the name prefixed with "metadata:" (such as "metadata:/IMAPSieve/ ScriptContents"), that contains the actual script in its value.shared attribute. Note that only the value.shared attribute is used; any value.priv attributes are ignored. This specifies the mechanism for "activating" a script for a given mailbox (or for all mailboxes), but does not specify a mechanism for creating, storing, or validating the script. Implementations MAY use [Manage] to acomplish this, using the PUTSCRIPT command to store the script without using the SETACTIVE command to activate it. In any case, the script name that is specified in the /IMAPSieve/Script metadata entry is in a form that depends upon how the server handles the storing of Sieve scripts. Only one Sieve script may currently be defined per mailbox, eliminating the complexity and possible ambiguity involved with coordinating the results of multiple scripts. Any sub-filtering is done in the Sieve script. For example, if it's only necessary to deal with flag changes, but not with new messages appended or copied, the Sieve script will still be invoked for all events, and the script is responsible for checking the event type. The possibility is open for an extensions to add support for multiple scripts -- for example, per-client scripts on a multi-client user's inbox, or per-user scripts on a mailbox that is shared among users. Leiba Expires January 12, 2010 [Page 9] Internet-Draft IMAP-Sieve July 2009 Because this metadata name is associated with the mailbox, there can (and it's expected that there will) be different scripts associated with events for different mailboxes. Indeed, most mailboxes will probably invoke no script at all. Leiba Expires January 12, 2010 [Page 10] Internet-Draft IMAP-Sieve July 2009 3. Applicable Sieve Actions and Interactions Since some Sieve actions relate specifically to the delivery of mail, not all actions make sense when the messages are created by other means or when changes are made to data associated with existing messages. This section describes how actions in the base Sieve specification, and those in extensions known at this writing, relate to this specification. In addition to what is specified here, interactions noted in the individual specifications apply, and must be considered. 3.1. The Implicit Keep For all cases that fall under IMAPSieve, the implicit keep means that the message is treated as it would have been if no Sieve script were run. For APPEND, MULTIAPPEND and COPY, the message is stored into the target mailbox normally. For flag or annotation changes, the message is left in the mailbox. 3.2. The Keep Action The keep action is applicable in all cases that fall under IMAPSieve. Its behaviour is as described for implicit keep, in Section 3.1. 3.3. The Fileinto Action If the Sieve implementation supports the fileinto action, that action is applicable in all cases that fall under IMAPSieve. If the [Copy] extension is available and the :copy option is specified, the implicit keep is retained; otherwise, fileinto cancels the implicit keep, as specified in the base Sieve specification. For APPEND, MULTIAPPEND, and COPY, the message is stored into the fileinto mailbox IN ADDITION TO the original target mailbox. For flag or annotation changes, the message is COPIED into the fileinto mailbox, without removing the original. If a keep action is NOT also in effect, the original message is then marked with the \Deleted flag (and a flag-change Sieve script is NOT invoked). The implementation MAY then expunge the original message (WITHOUT expunging other messages in the mailbox), or it MAY choose to have expunges batched, or done by a user. If the server does the expunge, the effect is as though a client had flagged the message and done a UID EXPUNGE (see [UIDPlus]) on the affected message(s) only. Handling it this way allows clients to handle messages consistently, and avoids hidden changes that might invalidate their message caches. Leiba Expires January 12, 2010 [Page 11] Internet-Draft IMAP-Sieve July 2009 3.4. The Redirect Action [[anchor4: Redirect assumes message can be submitted as is - not a valid assumption in this context. What do we do if the decision is "redirect" and there's not enough information to do it? Also, some have been concerned about, say, a flag change that has the Sieve effect of forwarding the message somewhere. Perhaps we should just forbid redirect.]] The redirect action is applicable in all cases that fall under IMAPSieve. It causes the message to be sent, as specified in the base Sieve specification, to the designated address. If the [Copy] extension is available and the :copy option is specified, the implicit keep is retained; otherwise, redirect cancels the implicit keep, as specified in the base Sieve specification. For APPEND, MULTIAPPEND, and COPY, the message is stored into the target mailbox in addition to being redirected. For flag or annotation changes, the message remains in its original mailbox. If a keep action is NOT also in effect, the original message is then marked with the \Deleted flag (and a flag-change Sieve script is NOT invoked). The implementation MAY then expunge the original message (WITHOUT expunging other messages in the mailbox), or it MAY choose to have expunges batched, or done by a user. If the server does the expunge, the effect is as though a client had flagged the message and done a UID EXPUNGE (see [UIDPlus]) on the affected message(s) only. Handling it this way allows clients to handle messages consistently, and avoids hidden changes that might invalidate their message caches. 3.5. The Reject Action The reject action is NOT applicable to any case that falls under IMAPSieve. Its use MUST result in an error condition that will terminate the Sieve script. 3.6. The Discard Action The discard action is applicable in all cases that fall under IMAPSieve. For APPEND, MULTIAPPEND, and COPY, the message is first stored into the target mailbox. If an explicit keep action is also in effect, the discard action now does nothing. Otherwise, the original message is then marked with the \Deleted flag (and a flag- change Sieve script is NOT invoked). The implementation MAY then expunge the original message (WITHOUT expunging other messages in the mailbox), or it MAY choose to have expunges batched, or done by a user. If the server does the expunge, the effect is as though a client had flagged the message and done a UID EXPUNGE (see [UIDPlus]) Leiba Expires January 12, 2010 [Page 12] Internet-Draft IMAP-Sieve July 2009 on the affected message(s) only. Handling it this way allows clients to handle messages consistently, and avoids hidden changes that might invalidate their message caches. 3.7. The Notify Action If the [Notify] extension is available, the notify action is applicable in all cases that fall under IMAPSieve. The result is that the requested notification is sent, and that the message is otherwise handled as it would normally have been. 3.8. The Addheader and Deleteheader Actions [[anchor5: Should editheader be allowed to change header fields that aren't saved in place, such as for redirect or fileinto? Editheader would still have to be banned for "keep", but not otherwise.]] Even if the [EditHeader] extension is available, since messages in IMAP mailboxes are immutable these actions are NOT applicable. Use of these MUST result in an error condition that will terminate the Sieve script. Explanation: Using them for flag or annotation changes to existing messages would cause the message to be changed. Using them for APPEND, MULTIAPPEND, and COPY would cause unexpected differences in the stored copy as compared to what the client expected, and would make the client's message cache invalid unexpectedly. 3.9. The Setflag, Deleteflag, and Removeflag Actions [[anchor6: Should this just require imap4flags? Some implementors have said they wouldn't bother with it without the ability to manipulate flags. And what values of flags does it see -- before or after the change? If it changes them, can it see the originals? Can it reset changes?]] If the [IMAP4Flags] extension is available, the actions associated with it are all applicable to any case that falls under IMAPSieve. It is worth noting also that the "hasflag" test that is defined in the IMAP4Flags extension might be particularly useful in scripts triggered by flag changes ("hasflag" will see the new, changed flags). The flag changes behave as though a client had made the change. As explained above, in order to avoid script loops flag changes that are made as a result of a script that was itself invoked because of flag changes SHOULD NOT result in another script invocation. In any case, implementations MUST take steps to avoid such loops. Leiba Expires January 12, 2010 [Page 13] Internet-Draft IMAP-Sieve July 2009 3.10. The Vacation Action Even if the [Vacation] extension is available, the vacation action is NOT applicable to any case that falls under IMAPSieve. Its use MUST result in an error condition that will terminate the Sieve script. 3.11. Spamtest [Spamtest] [[anchor7: We need to say something about the spamtest/ virustest extension. We need to be able to scan appended messages. And we can't use headers to communicate spam status, because the message is immutable. What should we say here?]] 3.12. New Sieve Environment Item: cause Implementations MAY invoke different Sieve scripts for the different conditions described in this document (append, copy, flag changes, annotation changes). If the actions to be taken are common, and the implementation supports the [Include] extension, the common script code can be included as specified there. It may be preferable, though, to use a single script for all these conditions. To support that, the implementation MUST set the [Environment] item "cause", which contains the name of the action that caused the script to be invoked. Its value is one of the following: o APPEND (for invocations resulting from APPEND or MULTIAPPEND) o COPY (for invocations resulting from COPY) o FLAG (for invocations resulting from flag changes) o ANNOTATE (for invocations resulting from new or changed annotations) 3.13. New Sieve Environment Item: mailbox The implementation MUST set the [Environment] item "mailbox" to the name of the mailbox that the affected message is in, in the case of existing messages, or is targeted to be stored into, in the case of new messages. The value of this item is fixed when the script begins, and, in particular, MUST NOT change as a result of any action, such as "fileinto". Leiba Expires January 12, 2010 [Page 14] Internet-Draft IMAP-Sieve July 2009 3.14. New Sieve Environment Item: changedflags If the [IMAP4Flags] extension is available, AND the script was invoked because of flag changes to an existing message, the implementation MUST set the [Environment] item "changedflags" to the name(s) of the flag(s) that have changed. If the script was not invoked because of flag changes, the value of this item MUST be the empty string. The script will not know from this item whether the flags have been set or reset, but it can use the "hasflag" test to determine the current value. See example 2 in Section 4 for an example of how this might be used. 3.15. New Sieve Environment Item: changedannotations If the [Annotate] extension is available, AND the script was invoked because of annotation changes to an existing message, the implementation MUST set the [Environment] item "changedannotations" to the name(s) of the annotation(s) that have changed. If the script was not invoked because of annotation changes, the value of this item MUST be the empty string. 3.16. Interaction With Sieve Tests (Comparisons) This extension does not affect the operation of any tests or comparisons. Leiba Expires January 12, 2010 [Page 15] Internet-Draft IMAP-Sieve July 2009 4. Examples Example 1: If a new message is added to the "ActionItems" mailbox, a copy is sent to the address "actionitems@example.com". require ["copy", "environment"]; if anyof (environment :is "cause" "APPEND", environment :is "cause" "COPY") { if environment :is "mailbox" "ActionItems" { redirect :copy "actionitems@example.com"; } } Example 2: If the script is called for any message with the \Flagged flag set (tested through the [IMAP4Flags] extension), a notification is sent using the [Notify] extension. No notification will be sent, though, if we're called with an existing message that already had that flag set. require ["notify", "imap4flags", "variables", "environment"]; if environment :matches "mailbox" "*" { set "mailbox" "${1}"; } if allof (hasflag "\\Flagged", not environment :contains "changedflags" "\\Flagged") { notify :message "Important message in ${mailbox}"; } Leiba Expires January 12, 2010 [Page 16] Internet-Draft IMAP-Sieve July 2009 5. Security Considerations It is possible to introduce script processing loops by having a Sieve script that is triggered by flag changes use the actions defined in the [IMAP4Flags] extension. Implementations MUST take steps to prevent such loops. One way to avoid this problem is that if a script is invoked by flag changes, and that script further changes the flags, those flag changes SHOULD NOT trigger a Sieve script invocation. Other security considerations are discussed in [IMAP], and [Sieve], as well as in some of the other extension documents. Leiba Expires January 12, 2010 [Page 17] Internet-Draft IMAP-Sieve July 2009 6. IANA Considerations 6.1. Registration of imapsieve extension The following template specifies the IANA registration of the Sieve extension specified in this document: To: iana@iana.org Subject: Registration of new Sieve extension Capability name: imapsieve Description: Add Sieve processing for IMAP events. RFC number: this RFC Contact address: Barry Leiba This information should be added to the list of sieve extensions given on http://www.iana.org/assignments/sieve-extensions. 6.2. Registration of environment item: cause The following template specifies the IANA registration of a sieve environment item specified in this document: To: iana@iana.org Subject: Registration of new Sieve environment item Item name: cause Description: The name of the action that caused the script to be invoked. Its value is one of the following: o APPEND (for invocations resulting from APPEND or MULTIAPPEND) o COPY (for invocations resulting from COPY) o FLAG (for invocations resulting from flag changes) o ANNOTATE (for invocations resulting from new or changed annotations) RFC number: this RFC Contact address: Barry Leiba This information should be added to the list of sieve environment item names given in the [Environment] extension. 6.3. Registration of environment item: mailbox The following template specifies the IANA registration of a sieve environment item specified in this document: Leiba Expires January 12, 2010 [Page 18] Internet-Draft IMAP-Sieve July 2009 To: iana@iana.org Subject: Registration of new Sieve environment item Item name: mailbox Description: The name of the mailbox that the affected message is in, in the case of existing messages, or is targeted to be stored into, in the case of new messages. The value of this item is fixed when the script begins, and, in particular, MUST NOT change as a result of any action, such as "fileinto". RFC number: this RFC Contact address: Barry Leiba This information should be added to the list of sieve environment item names given in the [Environment] extension. 6.4. Registration of environment item: changedflags The following template specifies the IANA registration of a sieve environment item specified in this document: To: iana@iana.org Subject: Registration of new Sieve environment item Item name: changedflags Description: If the script was invoked because of flag changes to an existing message, this contains the name(s) of the flag(s) that have changed. Otherwise, the value of this item MUST be the empty string. RFC number: this RFC Contact address: Barry Leiba This information should be added to the list of sieve environment item names given in the [Environment] extension. 6.5. Registration of environment item: changedannotations The following template specifies the IANA registration of a sieve environment item specified in this document: To: iana@iana.org Subject: Registration of new Sieve environment item Item name: changedannotations Description: If the script was invoked because of annotation changes to an existing message, this contains the name(s) of the annotation(s) that have changed. Otherwise, the value of this item MUST be the empty string. RFC number: this RFC Contact address: Barry Leiba Leiba Expires January 12, 2010 [Page 19] Internet-Draft IMAP-Sieve July 2009 This information should be added to the list of sieve environment item names given in the [Environment] extension. 6.6. Registration of IMAP METADATA mailbox entry name The following template specifies the IANA registration of an IMAP METADATA entry name specified in this document: To: iana@iana.org Subject: IMAP METADATA Registration Please register the following IMAP METADATA item: [x] Entry [ ] Attribute [x] Mailbox [ ] Server Name: /IMAPSieve/Script Description: This entry name is used to define mailbox metadata associated with IMAPSieve events for the associated mailbox. Specifically, this specifies the Sieve script that will be invoked when IMAP events occur on the specified mailbox. Content-type: text/plain; charset=utf-8 RFC number: this RFC Contact person: Barry Leiba Contact email: barryleiba@computer.org This information should be added to the list of IMAP METADATA item names given in the [Metadata] extension. 6.7. Registration of IMAP METADATA server entry name The following template specifies the IANA registration of an IMAP METADATA entry name specified in this document: To: iana@iana.org Subject: IMAP METADATA Registration Please register the following IMAP METADATA item: [x] Entry [ ] Attribute [ ] Mailbox [x] Server Name: /IMAPSieve/Script Description: This entry name is used to define metadata associated globally with IMAPSieve events for the associated server. Specifically, this specifies the Sieve script that will be invoked when IMAP events occur on any mailbox in the server that does not have its own mailbox-level /IMAPSieve/Script entry. Content-type: text/plain; charset=utf-8 RFC number: this RFC Contact person: Barry Leiba Contact email: barryleiba@computer.org This information should be added to the list of IMAP METADATA item Leiba Expires January 12, 2010 [Page 20] Internet-Draft IMAP-Sieve July 2009 names given in the [Metadata] extension. Leiba Expires January 12, 2010 [Page 21] Internet-Draft IMAP-Sieve July 2009 7. References 7.1. Normative References [Annotate] Daboo, C. and R. Gellens, "IMAP ANNOTATE Extension", RFC 5257, June 2008. [Copy] Degener, J., "Sieve Extension: Copying Without Side Effects", RFC 3894, October 2004. [Environment] Freed, N., "Sieve Email Filtering: Environment Extension", RFC 5183, May 2008. [IMAP] Crispin, M., "Internet Message Access Protocol - Version 4rev1", RFC 3501, March 2003. [IMAP4Flags] Melnikov, A., "Sieve Mail Filtering Language: IMAP flag Extension", RFC 5232, January 2008. [Keywds] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", RFC 2119, March 1997. [Metadata] Daboo, C., "The IMAP METADATA Extension", RFC 5464, February 2009. [MultiAppend] Crispin, M., "Internet Message Access Protocol (IMAP) - MULTIAPPEND Extension", RFC 3502, March 2003. [Sieve] Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email Filtering Language", RFC 5228, January 2008. 7.2. Non-Normative References [EditHeader] Degener, J. and P. Guenther, "Sieve Email Filtering: Editheader Extension", RFC 5293, August 2008. [Include] Daboo, C. and A. Stone, "SIEVE Email Filtering: Include Extension", work in progress, draft-ietf-sieve-include-02, May 2009. [Manage] Melnikov, A., Ed. and T. Martin, "A Protocol for Remotely Managing Sieve Scripts", RFC editor Leiba Expires January 12, 2010 [Page 22] Internet-Draft IMAP-Sieve July 2009 queue, draft-ietf-sieve-managesieve-09, January 2009. [Notify] Melnikov, A., Ed., Leiba, B., Ed., Segmuller, W., and T. Martin, "Sieve Email Filtering: Extension for Notifications", RFC 5435, January 2009. [Spamtest] Daboo, C., "Sieve Email Filtering: Spamtest and Virustest Extensions", RFC 5235, January 2008. [UIDPlus] Crispin, M., "Internet Message Access Protocol (IMAP) - UIDPLUS Extension", RFC 4315, December 2005. [Vacation] Showalter, T. and N. Freed, Ed., "Sieve Email Filtering: Vacation Extension", RFC 5230, January 2008. Leiba Expires January 12, 2010 [Page 23] Internet-Draft IMAP-Sieve July 2009 Author's Address Barry Leiba Huawei Technologies Phone: +1 646 827 0648 Email: barryleiba@computer.org Leiba Expires January 12, 2010 [Page 24]