INTERNET-DRAFT G. White draft-ietf-lemonade-futuredelivery-04.txt Independent Updates: RFC 3463, 3464 G. Vaudreuil Expires: September 9, 2006 Lucent Technologies March 9, 2006 SMTP Submission Service Extension for Future Message Release Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.html The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html Abstract This memo defines an extension to the SMTP submission protocol for a client to indicate a future time for the message to be released for delivery. This extension permits a client to use server-based storage for a message that should be held in queue until an appointed time in the future. This is useful for clients which do not have local storage or are otherwise unable to release a message for delivery at an appointed time. White & Vaudreuil Expires September 31, 2006 [Page 1] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 1. Introduction There is a widely-used feature within the voice messaging community to compose and send a message for delivery in the future. This is useful for sending announcements to be heard at the beginning of a work day, to send birthday greetings a day or so ahead, or to use as a lightweight facility to build a personal reminder service. This extension uses the SMTP submission protocol [n3] to allow a client, when submitting a message, to indicate a future time for the message to be released for delivery. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [n1]. 3. Framework The Future Message Release service extension for SMTP submission uses the SMTP service extension mechanism [n4] to extend the SMTP submission protocol [n3]. The following SMTP submission service extension is hereby defined: The name of the SMTP submission service extension is "Future Message Release". 1) The EHLO keyword associated with this service extension is "FUTURERELEASE". 2) Two required parameters, the max-future-release-interval and the max-future-release-date-time, are combined with the EHLO keyword in the manner specified in [n4]. The max-future-release-interval is a positive integer indicating the maximum amount of time for which the MSA will hold messages for future release. Using ABNF [n2], the syntax of this parameter is as follows: future-release-integer = %x31-39 *8DIGIT ; integer in the range 1-999999999 ; measured in seconds max-future-release-interval = future-release-integer The max-future-release-date-time is a timestamp, normalized to Universal Coordinated Time (UTC), indicating the most remote date and time in the future until which the MSA will hold messages for future release. White & Vaudreuil Expires September 31, 2006 [Page 2] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 Using ABNF [n2], the syntax of this parameter is as follows: max-future-release-date-time = Internet-style-date-time-UTC where the format of Internet-style-date-time is defined in [n10]. 3) When forming the portion of the EHLO reply containing the FUTURERELEASE keyword, the keyword is followed by the max-future-release-interval, and then the max-future-release-date-time. The keyword and two values are delimited by spaces. For example, the ABNF for a continuation line in the EHLO response that contains the FUTURERELEASE keyword is: line = "250-FUTURERELEASE" SP max-future-delivery-interval SP max-future-delivery-date-time 4) One required parameter, the hold-param, is added to the MAIL command using either the keyword "HOLDFOR" or the keyword "HOLDUNTIL". The HOLDFOR parameter value is a future-release-interval, which is a positive integer indicating the amount of time the message is to be held by the MSA before release. The HOLDUNTIL parameter value is a future-release-date-time, which is a timestamp, normalized to UTC, indicating the future date and time until which the message is to be held by the MSA before release. Using ABNF [n2], the syntax of this parameter is as follows: future-release-interval = future-release-integer future-release-date-time = Internet-style-date-time-UTC hold-for-param = "HOLDFOR=" future-release-interval hold-until-param = "HOLDUNTIL=" future-release-date-time hold-param = hold-for-param / hold-until-param The absence of this parameter on the MAIL command does not imply a default value for this parameter. 5) The maximum length of a MAIL command is increased by 34 characters by the possible addition of the hold-param. 6) No additional SMTP verbs are defined by this extension. White & Vaudreuil Expires September 31, 2006 [Page 3] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 7) This service extension is appropriate only for the SMTP submission protocol [n3]. This service extension is not appropriate for standard SMTP [n4]. 4.1 Behavior It is unfortunate to define two seemingly identical ways to indicate a future delivery time. When the client has both accurate time and accurate time zone information, either interval or date-time can be trivally calculated from the other. However, in the current world of clients, there are clients with accurate local time but no indication of their time zone, and client without a suitably accurate clock. Based on the limited facilities available to these time-challenged clients, it is likely that only one or the other of these mechanisms will be useful. It is believed that servers will have accurate time, and can trivally convert between these mechanisms. It is also accepted that the protocol and implementation overhead of offering these two mechanisms is low, and that few interoperability challenges are anticipated. 4.1.1 SMTP client behavior 1) An SMTP client preparing to use Future Message Release MUST first verify that the MSA supports this extension. 2) An SMTP client using Future Message Release MUST include one, and only one, hold-param with the MAIL command. 4) An SMTP client using Future Message Release with the "for" option of the hold-param MUST ensure that the future-release-interval is less than or equal to the max-future-release-interval advertised by the MSA. 4) An SMTP client using Future Message Release with the "until" option of the hold-param MUST ensure that the future-release-date-time is earlier than or equal to the max-future-release-date-time advertised by the MSA. 4.1.2 MSA behavior 1) An MSA supporting Future Message Release MUST comply with the SMTP submission protocol as described in [n3]. 2) An MSA supporting Future Message Release MUST NOT advertise this support (i.e. include the FUTURERELEASE keyword in its EHLO reply) on any port other than the submission port. 3) An MSA supporting Future Message Release MUST include the FUTURERELEASE keyword, and associated max-future-release-interval and max-future-release-date-time parameters, in its reply to the EHLO command. White & Vaudreuil Expires September 31, 2006 [Page 4] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 4) An MSA supporting Future Message Release MUST accept a MAIL command containing a valid hold-param, given that the MAIL command contains no other errors. 5) An MSA that accepts a message with a request for Future Message Release indicating the "for" option MUST NOT release the message until the amount of time specified in the future-release-interval elapses. 6) An MSA that accepts a message with a request for Future Message Release indicating the "until" option MUST NOT release the message until the date and time indicated by the future-release-date-time occurs. 7) An MSA supporting Future Message Release MUST reject a MAIL command containing the "for" option specifying a value that is greater than the advertised max-future-release-interval, or otherwise invalid. 8) An MSA supporting Future Message Release MUST reject a MAIL command containing the "until" option specifying a value that is later than the advertised max-future-release-date-time, or otherwise invalid. 9) An MSA supporting Future Message Release MUST reject a MAIL command containing more than one hold-param. 10) An MSA supporting Future Message Release, when rejecting a MAIL command per 4.1.2.7, 4.1.2.8 or 4.1.2.9, SHOULD supply the reply code 501 (syntax error in parameters or arguments [n4]) in the reply. 11) An MSA supporting Future Message Release, when rejecting a MAIL command per 4.1.2.7, 4.1.2.8 or 4.1.2.9, SHOULD supply the Enhanced Mail System Status Code 5.5.4 (invalid command arguments [i1]) in the reply. 4.2 Interaction with the DSN SMTP service extension The Delivery Status Notification (DSN) service extension is described in [n7], and DSN message format is described in [n8]. 4.2.1 SMTP client interaction with DSN 1) An SMTP client MUST NOT request Future Message Release when sending a DSN to the MSA. 4.2.2 MSA interaction with DSN 1) If an MSA generates a DSN for a message that includes a Future Message Release request, the MSA MUST include an Arrival-Date: field in the machine-readable body part of the DSN. White & Vaudreuil Expires September 31, 2006 [Page 5] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 2) If an MSA generates a DSN for a message that includes a Future Message Release request, the MSA MUST include a Future-Release-Request: field in the machine-readable body part of the DSN. The value of this field is the value of the HOLD parameter contained in the MAIL command of the original message. The Future-Release-Request: field is an extension to the set of DSN per-message fields described in [n8]. Using ABNF [n2], the syntax of this new field is as follows: orig-hold-param-value = ("for;" future-release-interval) / ("until;" future-release-date-time) ; this is the value of the HOLD parm from ; the MAIL command of the original message future-release-request-field = "Future-Release-Request:" orig-hold-param-value 4.3 Interaction with the DELIVERBY SMTP service extension If an MSA supports the Future Message release and Deliver By service extensions, it is possible for an SMTP client to make simultaneous requests for future message release and deliver-by times when submitting a message. A problem will occur if the future message release time is farther in the future than the deliver-by time. In order to honor the deliver-by request, the future message release request has to be ignored. In order to honor the future message release request, the deliver-by request has to be ignored. This section addresses that problem. The Deliver By extension is described in [n6]. 4.3.1 SMTP client interaction with DELIVERBY 1) When an SMTP client wishes to use the Future Message Release and Deliver By extensions with the same message, the client MUST ensure that the specified deliver-by time is farther in the future than the specified ("until" option) or implied ("for" option) future message release time. 4.3.2 MSA interaction with DELIVERBY 1) If an MSA supports Future Message Release and Deliver By extensions, and receives a message requesting the use of both extensions, the MSA MUST reject the MAIL command if it determines that the future message release time is farther in the future than the deliver-by time. 2) When an MSA is rejecting a MAIL command per 4.3.2.1, it SHOULD supply the reply code 501 (syntax error in parameters or arguments [n4]) in the reply. White & Vaudreuil Expires September 31, 2006 [Page 6] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 3) When an MSA is rejecting a MAIL command per 4.3.2.1, it SHOULD supply the Enhanced Mail System Status Code 5.5.4 (invalid command arguments [i1]) in the reply. 4.4 Interaction with the MDN function The Message Disposition Notification (MDN) function is described in [n9]. 4.4.1 SMTP client interaction with MDN 1) An SMTP client MUST NOT request Future Message Release when sending an MDN to the MSA. 5. Security Considerations The Future Message Release service extension presents a number of security considerations: 1) Unauthorized future-release messages provide a means to overwhelm the storage of an MSA. An MSA that supports Future Message Release MUST also support at least one of the authorization mechanisms enumerated in [n3]. 2) Authorized future-message-release without a per-user quota may also provide a way to overwhelm an MSA's storage. An MSA's future-release message storage SHOULD be subject to a per-user quota. 3) If an MSA is imposing a per-user quota on future-release message storage, and detects that an incoming future-release message will exceed the user's future-release message storage quota, the MSA MUST reject the MAIL command. 4) When an MSA is rejecting a MAIL command per 5.3, it SHOULD supply the reply code 552 (requested mail action aborted: exceeded storage allocation [n4]) in the reply. 5) When an MSA is rejecting a MAIL command per 5.3, it SHOULD supply the new Enhanced Mail System Status Code defined for this purpose. This new status code updates [i1]. X.7.9 Future-release message quota exceeded There is insuffient per-user quota to queue the message for future release. This code suggests the client can submit again only after the per-user queue has drained. White & Vaudreuil Expires September 31, 2006 [Page 7] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 6) Some element of deception is inherent in the future message release concept. The message release time is intentionally delayed past the time it would otherwise be released; hence, the message delivery time is delayed past the time it would otherwise be delivered. This extension provides no mechanism for hiding this from the message recipient. The RFC 2822 message header, and specifically the Date: field, remain unchanged after submission. While a sending client MAY elect to place the future-message-release-time as the date in the Date: field, there is no requirement or expectation that the Received: fields and other trace information be modified by the transport system to further this deception. 6. IANA Considerations According to the IANA website, this extension will be added to the list of SMTP extensions on the Mail Parameters webpage once this draft becomes a Standards Track RFC. This document defines an additional enhanced status code. At this time there is no IANA registry for these extension values beyond publication of this document in the standards-track. 7. Acknowledgments Much credit for this draft is due to the LEMONADE working group who through many revisions resulted in fundamental new understandings of this protocol and corresponding refinement of the implied requirements and protocol. Special thanks to Mark Crispin for patiently leading the WG to understand that doing both interval and date-time was the pragmatically correct approach to the needs of diverse clients. White & Vaudreuil Expires September 31, 2006 [Page 8] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 8. Normative References [n1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [n2] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", RFC 4234, October 2005. [n3] Gellens, R. and J. Klensin, "Message Submission", RFC 2476, December 1998. [n4] Klensin, J., "Simple Mail Transfer Protocol", RFC 2821, April 2001. [n5] Resnick, P., "Internet Message Format", RFC 2822, April 2001. [n6] Newman, D., "Deliver By SMTP Service Extension", RFC 2852, June 2000. [n7] Moore, K., "Simple Mail Transfer Protocol (SMTP) Service Extension for Delivery Status Notifications (DSNs)", RFC 3461, January 2003. [n8] Moore, K. and G. Vaudreuil, "An Extensible Message Format for Delivery Status Notifications", RFC 3464, January 2003. [n9] Hansen, T. and G. Vaudreuil, "Message Disposition Notification," RFC 3798, May 2004. [n10] Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps," RFC 3339, July 2002 9. Informative References [i1] Vaudreuil, G., "Enhanced Mail System Status Codes", RFC 3463, Jauuary 2003. 10. Authors' Addresses Gregory A. White 6519 Camille Ave. Dallas, TX 75252 USA E-Mail: g.a.white@comcast.net Gregory M. Vaudreuil Lucent Technologies 9489 Bartgis Ct Frederick, MD 21702 USA E-Mail: GregV@ieee.org White & Vaudreuil Expires September 31, 2006 [Page 9] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 11. Intellectual Property Rights Notice The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. 12. Copyright Notice and Disclaimer Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. White & Vaudreuil Expires September 31, 2006 [Page 10] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 13. Change Log (to be removed upon RFC Publication) 13.1 Changes from -03.txt to -04.txt 1) Changed extension framework to define HOLDFOR and HOLDUNTIL for the MAIL command (instead of the HOLD parameter). 2) Made wording changes to several of the SMTP client and MSA behavior requirements 13.2 Changes from -02.txt to -03.txt 1) Rewrote entire draft in terms of future message release instead of future message delivery. Almost every paragraph of Sections 1 through 5 have been changed. 13.3 Changes from -01.txt to -02.txt 1) Clarified requirements in section 4.1.1, SMTP client behaviour. 2) Removed the requirement that the MSA comply with the SMTP service extension mechanism, as the list thought this was redundant text. 3) Added requirement that the MSA MUST only advertise this extension on the submission port. 4) Added requirements stating how to form the reply to a MAIL command when the future delivery time included with the MAIL command is greater than the max-allowable-future-delivery-time advertised by the MSA. 5) Added requirements stating how to form the reply to a MAIL command when the future-delivery-time and the deliver-by time don't align properly. 6) Change the level of the requirement of the per-user quota requirement in Section 5, Security Considerations, from "highly RECOMMENDED" to "SHOULD". 7) Added requirements stating how to form the reply to a MAIL command when the MSA detects that the future delivery message will exceed the user's future delivery quota. This includes the definition of a new Enhanced Mail System Status Code. 13.4 Changes from -00.txt to -01.txt 1) Removed the Mechanism section, as it pretty much duplicated the Behavior section. 2) Removed the requirement that an MSA supporting FUTUREDELIVERY MUST also support the AUTH extension. Removed all of the requirements referencing the AUTH extension. White & Vaudreuil Expires September 31, 2006 [Page 11] INTERNET-DRAFT SMTP Future Message Release March 9, 2006 3) Changed requirement for EHLO FUTUREDELIVERY keyword so that a positive max-future-delivery-interval value MUST be supplied with that keyword. A value of zero, or no value at all, are no longer options. 4) Changed the ABNF definition of max-future-delivery-interval and future-delivery-interval from [1*9DIGIT] to [%x31-39 *8DIGIT]. This change forces these values to be integers in the range 1-999999999. 5) Added section for FUTUREDELIVERY interaction with MDN. 6) Modified the definition of the Future-Delivery-Date: field to state that the zone in the date-time value MUST be numeric. Since this field goes in the machine-readable portion of a DSN, this change was made so the definition matches the definitions of the other date fields defined in RFC 3464. 7) Rewrote Security Considerations in terms of "authorization" instead of "authentication." 8) Modified paragraph 1) of Security Considerations to state that an MSA supporting FUTUREDELIVERY MUST employ at least one of the authorization mechanisms listed in RFC 2476. 9) Made all (hopefully) of the changes necessary for the draft to be compliant with ID-NITS and ID-GUIDELINES found on the IETF website. Made other wordsmithing changes to improve clarity. 13.5 Discussion of -00.txt As a note, the -00.txt version of this draft was previously published as draft-vaudreuil-futuredelivery-02.txt. The name of the draft was changed after the LEMONADE WG voted to make this document a WG item. White & Vaudreuil Expires September 31, 2006 [Page 12]