GNAP J. Richer, Ed. Internet-Draft Bespoke Engineering Intended status: Standards Track A. Parecki Expires: 26 August 2021 Okta F. Imbault acert.io 22 February 2021 Grant Negotiation and Authorization Protocol draft-ietf-gnap-core-protocol-04 Abstract GNAP defines a mechanism for delegating authorization to a piece of software, and conveying that delegation to the software. This delegation can include access to a set of APIs as well as information passed directly to the software. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 26 August 2021. Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. Richer, et al. Expires 26 August 2021 [Page 1] Internet-Draft Grant Negotiation and Authorization Prot February 2021 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 4 1.2. Roles . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3. Elements . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4. Sequences . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4.1. Redirect-based Interaction . . . . . . . . . . . . . 10 1.4.2. User-code Interaction . . . . . . . . . . . . . . . . 13 1.4.3. Asynchronous Authorization . . . . . . . . . . . . . 15 1.4.4. Software-only Authorization . . . . . . . . . . . . . 17 1.4.5. Refreshing an Expired Access Token . . . . . . . . . 18 2. Requesting Access . . . . . . . . . . . . . . . . . . . . . . 19 2.1. Requesting Access to Resources . . . . . . . . . . . . . 21 2.1.1. Requesting a Single Access Token . . . . . . . . . . 21 2.1.2. Requesting Multiple Access Tokens . . . . . . . . . . 24 2.2. Requesting Subject Information . . . . . . . . . . . . . 26 2.3. Identifying the Client Instance . . . . . . . . . . . . . 27 2.3.1. Identifying the Client Instance by Reference . . . . 28 2.3.2. Providing Displayable Client Instance Information . . 29 2.3.3. Authenticating the Client Instance . . . . . . . . . 30 2.4. Identifying the User . . . . . . . . . . . . . . . . . . 30 2.4.1. Identifying the User by Reference . . . . . . . . . . 31 2.5. Interacting with the User . . . . . . . . . . . . . . . . 32 2.5.1. Start Mode Definitions . . . . . . . . . . . . . . . 32 2.5.2. Finish Mode Definitions . . . . . . . . . . . . . . . 33 2.5.3. Hint Definitions . . . . . . . . . . . . . . . . . . 33 2.5.4. Example Interactions . . . . . . . . . . . . . . . . 33 2.5.5. Start Interaction Modes . . . . . . . . . . . . . . . 34 2.5.6. Finish Interaction Modes . . . . . . . . . . . . . . 35 2.5.7. Hints . . . . . . . . . . . . . . . . . . . . . . . . 37 2.5.8. Extending Interaction Modes . . . . . . . . . . . . . 38 2.6. Declaring Client Capabilities . . . . . . . . . . . . . . 38 2.7. Referencing an Existing Grant Request . . . . . . . . . . 38 2.8. Extending The Grant Request . . . . . . . . . . . . . . . 39 3. Grant Response . . . . . . . . . . . . . . . . . . . . . . . 39 3.1. Request Continuation . . . . . . . . . . . . . . . . . . 40 3.2. Access Tokens . . . . . . . . . . . . . . . . . . . . . . 41 3.2.1. Single Access Token . . . . . . . . . . . . . . . . . 42 Richer, et al. Expires 26 August 2021 [Page 2] Internet-Draft Grant Negotiation and Authorization Prot February 2021 3.2.2. Multiple Access Tokens . . . . . . . . . . . . . . . 45 3.3. Interaction Modes . . . . . . . . . . . . . . . . . . . . 46 3.3.1. Redirection to an arbitrary URL . . . . . . . . . . . 47 3.3.2. Launch of an application URL . . . . . . . . . . . . 48 3.3.3. Post-interaction Callback to a Client Instance Accessible URL . . . . . . . . . . . . . . . . . . . 48 3.3.4. Display of a Short User Code . . . . . . . . . . . . 49 3.3.5. Extending Interaction Mode Responses . . . . . . . . 50 3.4. Returning User Information . . . . . . . . . . . . . . . 50 3.5. Returning Dynamically-bound Reference Handles . . . . . . 51 3.6. Error Response . . . . . . . . . . . . . . . . . . . . . 53 3.7. Extending the Response . . . . . . . . . . . . . . . . . 53 4. Interaction at the AS . . . . . . . . . . . . . . . . . . . . 53 4.1. Interaction at a Redirected URI . . . . . . . . . . . . . 54 4.2. Interaction at the User Code URI . . . . . . . . . . . . 54 4.3. Interaction through an Application URI . . . . . . . . . 55 4.4. Post-Interaction Completion . . . . . . . . . . . . . . . 55 4.4.1. Completing Interaction with a Browser Redirect to the Callback URI . . . . . . . . . . . . . . . . . . . . 55 4.4.2. Completing Interaction with a Direct HTTP Request Callback . . . . . . . . . . . . . . . . . . . . . . 56 4.4.3. Calculating the interaction hash . . . . . . . . . . 57 5. Continuing a Grant Request . . . . . . . . . . . . . . . . . 58 5.1. Continuing After a Completed Interaction . . . . . . . . 60 5.2. Continuing During Pending Interaction . . . . . . . . . . 61 5.3. Modifying an Existing Request . . . . . . . . . . . . . . 62 5.4. Canceling a Grant Request . . . . . . . . . . . . . . . . 67 6. Token Management . . . . . . . . . . . . . . . . . . . . . . 68 6.1. Rotating the Access Token . . . . . . . . . . . . . . . . 68 6.2. Revoking the Access Token . . . . . . . . . . . . . . . . 70 7. Securing Requests from the Client Instance . . . . . . . . . 71 7.1. Key Formats . . . . . . . . . . . . . . . . . . . . . . . 71 7.1.1. Key References . . . . . . . . . . . . . . . . . . . 72 7.2. Presenting Access Tokens . . . . . . . . . . . . . . . . 73 7.3. Proving Possession of a Key with a Request . . . . . . . 74 7.3.1. Detached JWS . . . . . . . . . . . . . . . . . . . . 75 7.3.2. Attached JWS . . . . . . . . . . . . . . . . . . . . 77 7.3.3. Mutual TLS . . . . . . . . . . . . . . . . . . . . . 80 7.3.4. Demonstration of Proof-of-Possession (DPoP) . . . . . 82 7.3.5. HTTP Message Signing . . . . . . . . . . . . . . . . 83 7.3.6. OAuth Proof of Possession (PoP) . . . . . . . . . . . 85 8. Resource Access Rights . . . . . . . . . . . . . . . . . . . 86 8.1. Requesting Resources By Reference . . . . . . . . . . . . 90 9. Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . 92 10. Resource Servers . . . . . . . . . . . . . . . . . . . . . . 93 10.1. Introspecting a Token . . . . . . . . . . . . . . . . . 93 10.2. Deriving a downstream token . . . . . . . . . . . . . . 95 10.3. Registering a Resource Handle . . . . . . . . . . . . . 97 Richer, et al. Expires 26 August 2021 [Page 3] Internet-Draft Grant Negotiation and Authorization Prot February 2021 10.4. Requesting Resources With Insufficient Access . . . . . 98 11. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 98 12. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 99 13. Security Considerations . . . . . . . . . . . . . . . . . . . 99 14. Privacy Considerations . . . . . . . . . . . . . . . . . . . 99 15. Normative References . . . . . . . . . . . . . . . . . . . . 99 Appendix A. Document History . . . . . . . . . . . . . . . . . . 101 Appendix B. Component Data Models . . . . . . . . . . . . . . . 102 Appendix C. Example Protocol Flows . . . . . . . . . . . . . . . 103 C.1. Redirect-Based User Interaction . . . . . . . . . . . . . 103 C.2. Secondary Device Interaction . . . . . . . . . . . . . . 107 C.3. No User Involvement . . . . . . . . . . . . . . . . . . . 110 C.4. Asynchronous Authorization . . . . . . . . . . . . . . . 111 C.5. Applying OAuth 2 Scopes and Client IDs . . . . . . . . . 114 Appendix D. JSON Structures and Polymorphism . . . . . . . . . . 115 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 116 1. Introduction This protocol allows a piece of software, the client instance, to request delegated authorization to resource servers and to request direct information. This delegation is facilitated by an authorization server usually on behalf of a resource owner. The end- user operating the software may interact with the authorization server to authenticate, provide consent, and authorize the request. The process by which the delegation happens is known as a grant, and GNAP allows for the negotiation of the grant process over time by multiple parties acting in distinct roles. This protocol solves many of the same use cases as OAuth 2.0 [RFC6749], OpenID Connect [OIDC], and the family of protocols that have grown up around that ecosystem. However, GNAP is not an extension of OAuth 2.0 and is not intended to be directly compatible with OAuth 2.0. GNAP seeks to provide functionality and solve use cases that OAuth 2.0 cannot easily or cleanly address. Even so, GNAP and OAuth 2.0 will exist in parallel for many deployments, and considerations have been taken to facilitate the mapping and transition from legacy systems to GNAP. Some examples of these can be found in Appendix C.5. 1.1. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. Richer, et al. Expires 26 August 2021 [Page 4] Internet-Draft Grant Negotiation and Authorization Prot February 2021 1.2. Roles The parties in GNAP perform actions under different roles. Roles are defined by the actions taken and the expectations leveraged on the role by the overall protocol. Authorization Server (AS) server that grants delegated privileges to a particular instance of client software in the form of an access token and other information (such as subject information). Client application operated by an end-user that consumes resources from one or several RSs, possibly requiring access privileges from one or several ASs. Example: a client can be a mobile application, a web application, etc. Note: this specification differentiates between a specific instance (the client instance, identified by its unique key) and the software running the instance (the client software). For some kinds of client software, there could be many instances of that software, each instance with a different key. Resource Server (RS) server that provides operations on protected resources, where operations require a valid access token issued by an AS. Resource Owner (RO) subject entity that may grant or deny operations on resources it has authority upon. Note: the act of granting or denying an operation may be manual (i.e. through an interaction with a physical person) or automatic (i.e. through predefined organizational rules). End-user natural person that operates a client instance. Note: that natural person may or may not be the same entity as the RO. The design of GNAP does not assume any one deployment architecture, but instead attempts to define roles that can be fulfilled in a number of different ways for different use cases. As long as a given role fulfills all of its obligations and behaviors as defined by the protocol, GNAP does not make additional requirements on its structure or setup. Richer, et al. Expires 26 August 2021 [Page 5] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Multiple roles can be fulfilled by the same party, and a given party can switch roles in different instances of the protocol. For example, the RO and end-user in many instances are the same person, where a user is authorizing the client instance to act on their own behalf at the RS. In this case, one party fulfills both of the RO and end-user roles, but the roles themselves are still defined separately from each other to allow for other use cases where they are fulfilled by different parties. For another example, in some complex scenarios, an RS receiving requests from one client instance can act as a client instance for a downstream secondary RS in order to fulfill the original request. In this case, one piece of software is both an RS and a client instance from different perspectives, and it fulfills these roles separately as far as the overall protocol is concerned. A single role need not be deployed as a monolithic service. For example, A client instance could have components that are installed on the end-user's device as well as a back-end system that it communicates with. If both of these components participate in the delegation protocol, they are both considered part of the client instance. If there are several copies of the client software that run separately but all share the same key material, such as a deployed cluster, then this cluster is considered a single client instance. For another example, an AS could likewise be built out of many constituent components in a distributed architecture. The component that the client instance calls directly could be different from the component that the the RO interacts with to drive consent, since API calls and user interaction have different security considerations in many environments. Furthermore, the AS could need to collect identity claims about the RO from one system that deals with user attributes while generating access tokens at another system that deals with security rights. From the perspective of GNAP, all of these are pieces of the AS and together fulfill the role of the AS as defined by the protocol. 1.3. Elements In addition to the roles above, the protocol also involves several elements that are acted upon by the roles throughout the process. Attribute characteristics related to a subject. Access Token a data artifact representing a set of rights and/or attributes. Richer, et al. Expires 26 August 2021 [Page 6] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Note: an access token can be first issued to an client instance (requiring authorization by the RO) and subsequently rotated. Grant (verb): to permit an instance of client software to receive some attributes at a specific time and valid for a specific duration and/or to exercise some set of delegated rights to access a protected resource (noun): the act of granting. Privilege right or attribute associated with a subject. Note: the RO defines and maintains the rights and attributes associated to the protected resource, and might temporarily delegate some set of those privileges to an end-user. This process is refered to as privilege delegation. Protected Resource protected API (Application Programming Interface) served by an RS and that can be accessed by a client, if and only if a valid access token is provided. Note: to avoid complex sentences, the specification document may simply refer to resource instead of protected resource. Right ability given to a subject to perform a given operation on a resource under the control of an RS. Subject person, organization or device. Subject Information statement asserted locally by an AS about a subject. 1.4. Sequences GNAP can be used in a variety of ways to allow the core delegation process to take place. Many portions of this process are conditionally present depending on the context of the deployments, and not every step in this overview will happen in all circumstances. Note that a connection between roles in this process does not necessarily indicate that a specific protocol message is sent across the wire between the components fulfilling the roles in question, or that a particular step is required every time. For example, for a client instance interested in only getting subject information directly, and not calling an RS, all steps involving the RS below do not apply. Richer, et al. Expires 26 August 2021 [Page 7] Internet-Draft Grant Negotiation and Authorization Prot February 2021 In some circumstances, the information needed at a given stage is communicated out of band or is preconfigured between the components or entities performing the roles. For example, one entity can fulfil multiple roles, and so explicit communication between the roles is not necessary within the protocol flow. +------------+ +------------+ | End-user | ~ ~ ~ ~ ~ ~ | Resource | | | | Owner (RO) | +------------+ +------------+ + + + + (A) (B) + + + + +--------+ + +------------+ | Client |--------------(1)------+------>| Resource | |Instance| + | Server | | | +---------------+ | (RS) | | |--(2)->| Authorization | | | | |<-(3)--| Server | | | | | | (AS) | | | | |--(4)->| | | | | |<-(5)--| | | | | |--------------(6)------------->| | | | | |<~(7)~~| | | |<-------------(8)------------->| | | |--(9)->| | | | | |<-(10)-| | | | | |--------------(11)------------>| | | | | |<~(12)~| | | |-(13)->| | | | | | | | | | +--------+ +---------------+ +------------+ Legend + + + indicates a possible interaction with a human ----- indicates an interaction between protocol roles ~ ~ ~ indicates a potential equivalence or out-of-band communication between roles * (A) The end-user interacts with the client instance to indicate a need for resources on behalf of the RO. This could identify the RS the client instance needs to call, the resources needed, or the RO that is needed to approve the request. Note that the RO and end-user are often the same entity in practice. Richer, et al. Expires 26 August 2021 [Page 8] Internet-Draft Grant Negotiation and Authorization Prot February 2021 * (1) The client instance attempts to call the RS (Section 10.4) to determine what access is needed. The RS informs the client instance that access can be granted through the AS. Note that for most situations, the client instance already knows which AS to talk to and which kinds of access it needs. * (2) The client instance requests access at the AS (Section 2). * (3) The AS processes the request and determines what is needed to fulfill the request. The AS sends its response to the client instance (Section 3). * (B) If interaction is required, the AS interacts with the RO (Section 4) to gather authorization. The interactive component of the AS can function using a variety of possible mechanisms including web page redirects, applications, challenge/response protocols, or other methods. The RO approves the request for the client instance being operated by the end-user. Note that the RO and end-user are often the same entity in practice. * (4) The client instance continues the grant at the AS (Section 5). * (5) If the AS determines that access can be granted, it returns a response to the client instance (Section 3) including an access token (Section 3.2) for calling the RS and any directly returned information (Section 3.4) about the RO. * (6) The client instance uses the access token (Section 7.2) to call the RS. * (7) The RS determines if the token is sufficient for the request by examining the token, potentially calling the AS (Section 10.1). Note that the RS could also examine the token directly, call an internal data store, execute a policy engine request, or any number of alternative methods for validating the token and its fitness for the request. * (8) The client instance calls the RS (Section 7.2) using the access token until the RS or client instance determine that the token is no longer valid. * (9) When the token no longer works, the client instance fetches an updated access token (Section 6.1) based on the rights granted in (5). * (10) The AS issues a new access token (Section 3.2) to the client instance. Richer, et al. Expires 26 August 2021 [Page 9] Internet-Draft Grant Negotiation and Authorization Prot February 2021 * (11) The client instance uses the new access token (Section 7.2) to call the RS. * (12) The RS determines if the new token is sufficient for the request by examining the token, potentially calling the AS (Section 10.1). * (13) The client instance disposes of the token (Section 6.2) once the client instance has completed its access of the RS and no longer needs the token. The following sections and Appendix C contain specific guidance on how to use GNAP in different situations and deployments. 1.4.1. Redirect-based Interaction In this example flow, the client instance is a web application that wants access to resources on behalf of the current user, who acts as both the end-user and the resource owner (RO). Since the client instance is capable of directing the user to an arbitrary URL and receiving responses from the user's browser, interaction here is handled through front-channel redirects using the user's browser. The client instance uses a persistent session with the user to ensure the same user that is starting the interaction is the user that returns from the interaction. Richer, et al. Expires 26 August 2021 [Page 10] Internet-Draft Grant Negotiation and Authorization Prot February 2021 +--------+ +--------+ +------+ | Client | | AS | | User | |Instance| | | | | | |< (1) + Start Session + + + + + + + + + + + + + + + +| | | | | | | | | |--(2)--- Request Access --------->| | | | | | | | | | | |<-(3)-- Interaction Needed -------| | | | | | | | | | | |+ (4) + Redirect for Interaction + + + + + + + + + > | | | | | | | | | | | |<+ (5) +>| | | | | | AuthN | | | | | | | | | | | |<+ (6) +>| | | | | | AuthZ | | | | | | | | | |< (7) + Redirect for Continuation + + + + + + + + + +| | | | | | +------+ | |--(8)--- Continue Request ------->| | | | | | | |<-(9)----- Grant Access ----------| | | | | | +--------+ +--------+ 1. The client instance establishes a verifiable session to the user, in the role of the end-user. 2. The client instance requests access to the resource (Section 2). The client instance indicates that it can redirect to an arbitrary URL (Section 2.5.5.1) and receive a redirect from the browser (Section 2.5.6.1). The client instance stores verification information for its redirect in the session created in (1). 3. The AS determines that interaction is needed and responds (Section 3) with a URL to send the user to (Section 3.3.1) and information needed to verify the redirect (Section 3.3.3) in (7). The AS also includes information the client instance will need to continue the request (Section 3.1) in (8). The AS associates this continuation information with an ongoing request that will be referenced in (4), (6), and (8). Richer, et al. Expires 26 August 2021 [Page 11] Internet-Draft Grant Negotiation and Authorization Prot February 2021 4. The client instance stores the verification and continuation information from (3) in the session from (1). The client instance then redirects the user to the URL (Section 4.1) given by the AS in (3). The user's browser loads the interaction redirect URL. The AS loads the pending request based on the incoming URL generated in (3). 5. The user authenticates at the AS, taking on the role of the RO. 6. As the RO, the user authorizes the pending request from the client instance. 7. When the AS is done interacting with the user, the AS redirects the user back (Section 4.4.1) to the client instance using the redirect URL provided in (2). The redirect URL is augmented with an interaction reference that the AS associates with the ongoing request created in (2) and referenced in (4). The redirect URL is also augmented with a hash of the security information provided in (2) and (3). The client instance loads the verification information from (2) and (3) from the session created in (1). The client instance calculates a hash (Section 4.4.3) based on this information and continues only if the hash validates. Note that the client instance needs to ensure that the parameters for the incoming request match those that it is expecting from the session created in (1). The client instance also needs to be prepared for the end-user never being returned to the client instance and handle timeouts appropriately. 8. The client instance loads the continuation information from (3) and sends the interaction reference from (7) in a request to continue the request (Section 5.1). The AS validates the interaction reference ensuring that the reference is associated with the request being continued. 9. If the request has been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the client instance. An example set of protocol messages for this method can be found in Appendix C.1. Richer, et al. Expires 26 August 2021 [Page 12] Internet-Draft Grant Negotiation and Authorization Prot February 2021 1.4.2. User-code Interaction In this example flow, the client instance is a device that is capable of presenting a short, human-readable code to the user and directing the user to enter that code at a known URL. The client instance is not capable of presenting an arbitrary URL to the user, nor is it capable of accepting incoming HTTP requests from the user's browser. The client instance polls the AS while it is waiting for the RO to authorize the request. The user's interaction is assumed to occur on a secondary device. In this example it is assumed that the user is both the end-user and RO, though the user is not assumed to be interacting with the client instance through the same web browser used for interaction at the AS. +--------+ +--------+ +------+ | Client | | AS | | User | |Instance|--(1)--- Request Access --------->| | | | | | | | | | | |<-(2)-- Interaction Needed -------| | | | | | | | | | | |+ (3) + + Display User Code + + + + + + + + + + + + >| | | | | | | | | | | |<+ (4) + | | | | | |Open URI | | | | | | | | | | | |<+ (5) +>| | | | | | AuthN | | | |--(9)--- Continue Request (A) --->| | | | | | | |<+ (6) +>| | | |<-(10)- Not Yet Granted (Wait) ---| | Code | | | | | | | | | | | |<+ (7) +>| | | | | | AuthZ | | | | | | | | | | | |<+ (8) +>| | | | | |Completed| | | | | | | | | |--(11)-- Continue Request (B) --->| | +------+ | | | | | |<-(12)----- Grant Access ---------| | | | | | +--------+ +--------+ 1. The client instance requests access to the resource (Section 2). The client instance indicates that it can display a user code (Section 2.5.5.3). Richer, et al. Expires 26 August 2021 [Page 13] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2. The AS determines that interaction is needed and responds (Section 3) with a user code to communicate to the user (Section 3.3.4). This could optionally include a URL to direct the user to, but this URL should be static and so could be configured in the client instance's documentation. The AS also includes information the client instance will need to continue the request (Section 3.1) in (8) and (10). The AS associates this continuation information with an ongoing request that will be referenced in (4), (6), (8), and (10). 3. The client instance stores the continuation information from (2) for use in (8) and (10). The client instance then communicates the code to the user (Section 4.1) given by the AS in (2). 4. The user's directs their browser to the user code URL. This URL is stable and can be communicated via the client software's documentation, the AS documentation, or the client software itself. Since it is assumed that the RO will interact with the AS through a secondary device, the client instance does not provide a mechanism to launch the RO's browser at this URL. 5. The end-user authenticates at the AS, taking on the role of the RO. 6. The RO enters the code communicated in (3) to the AS. The AS validates this code against a current request in process. 7. As the RO, the user authorizes the pending request from the client instance. 8. When the AS is done interacting with the user, the AS indicates to the RO that the request has been completed. 9. Meanwhile, the client instance loads the continuation information stored at (3) and continues the request (Section 5). The AS determines which ongoing access request is referenced here and checks its state. Richer, et al. Expires 26 August 2021 [Page 14] Internet-Draft Grant Negotiation and Authorization Prot February 2021 10. If the access request has not yet been authorized by the RO in (6), the AS responds to the client instance to continue the request (Section 3.1) at a future time through additional polled continuation requests. This response can include updated continuation information as well as information regarding how long the client instance should wait before calling again. The client instance replaces its stored continuation information from the previous response (2). Note that the AS may need to determine that the RO has not approved the request in a sufficient amount of time and return an appropriate error to the client instance. 11. The client instance continues to poll the AS (Section 5.2) with the new continuation information in (9). 12. If the request has been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the client instance. An example set of protocol messages for this method can be found in Appendix C.2. 1.4.3. Asynchronous Authorization In this example flow, the end-user and RO roles are fulfilled by different parties, and the RO does not interact with the client instance. The AS reaches out asynchronously to the RO during the request process to gather the RO's authorization for the client instance's request. The client instance polls the AS while it is waiting for the RO to authorize the request. Richer, et al. Expires 26 August 2021 [Page 15] Internet-Draft Grant Negotiation and Authorization Prot February 2021 +--------+ +--------+ +------+ | Client | | AS | | RO | |Instance|--(1)--- Request Access --------->| | | | | | | | | | | |<-(2)-- Not Yet Granted (Wait) ---| | | | | | | |<+ (3) +>| | | | | | AuthN | | | |--(6)--- Continue Request (A) --->| | | | | | | |<+ (4) +>| | | |<-(7)-- Not Yet Granted (Wait) ---| | AuthZ | | | | | | | | | | | |<+ (5) +>| | | | | |Completed| | | | | | | | | |--(8)--- Continue Request (B) --->| | +------+ | | | | | |<-(9)------ Grant Access ---------| | | | | | +--------+ +--------+ 1. The client instance requests access to the resource (Section 2). The client instance does not send any interactions modes to the server, indicating that it does not expect to interact with the RO. The client instance can also signal which RO it requires authorization from, if known, by using the user request section (Section 2.4). 2. The AS determines that interaction is needed, but the client instance cannot interact with the RO. The AS responds (Section 3) with the information the client instance will need to continue the request (Section 3.1) in (6) and (8), including a signal that the client instance should wait before checking the status of the request again. The AS associates this continuation information with an ongoing request that will be referenced in (3), (4), (5), (6), and (8). 3. The AS determines which RO to contact based on the request in (1), through a combination of the user request (Section 2.4), the resources request (Section 2.1), and other policy information. The AS contacts the RO and authenticates them. 4. The RO authorizes the pending request from the client instance. 5. When the AS is done interacting with the RO, the AS indicates to the RO that the request has been completed. Richer, et al. Expires 26 August 2021 [Page 16] Internet-Draft Grant Negotiation and Authorization Prot February 2021 6. Meanwhile, the client instance loads the continuation information stored at (3) and continues the request (Section 5). The AS determines which ongoing access request is referenced here and checks its state. 7. If the access request has not yet been authorized by the RO in (6), the AS responds to the client instance to continue the request (Section 3.1) at a future time through additional polling. This response can include refreshed credentials as well as information regarding how long the client instance should wait before calling again. The client instance replaces its stored continuation information from the previous response (2). Note that the AS may need to determine that the RO has not approved the request in a sufficient amount of time and return an appropriate error to the client instance. 8. The client instance continues to poll the AS (Section 5.2) with the new continuation information from (7). 9. If the request has been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the client instance. An example set of protocol messages for this method can be found in Appendix C.4. 1.4.4. Software-only Authorization In this example flow, the AS policy allows the client instance to make a call on its own behalf, without the need for a RO to be involved at runtime to approve the decision. Since there is no explicit RO, the client instance does not interact with an RO. +--------+ +--------+ | Client | | AS | |Instance|--(1)--- Request Access --------->| | | | | | | |<-(2)---- Grant Access -----------| | | | | | +--------+ +--------+ 1. The client instance requests access to the resource (Section 2). The client instance does not send any interactions modes to the server. Richer, et al. Expires 26 August 2021 [Page 17] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2. The AS determines that the request is been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the client instance. An example set of protocol messages for this method can be found in Appendix C.3. 1.4.5. Refreshing an Expired Access Token In this example flow, the client instance receives an access token to access a resource server through some valid GNAP process. The client instance uses that token at the RS for some time, but eventually the access token expires. The client instance then gets a new access token by rotating the expired access token at the AS using the token's management URL. +--------+ +--------+ | Client | | AS | |Instance|--(1)--- Request Access ----------------->| | | | | | | |<-(2)--- Grant Access --------------------| | | | | | | | +--------+ | | | |--(3)--- Access Resource --->| RS | | | | | | | | | | |<-(4)--- Error Response -----| | | | | | +--------+ | | | | | | | |--(5)--- Rotate Token ------------------->| | | | | | | |<-(6)--- Rotated Token -------------------| | | | | | +--------+ +--------+ 1. The client instance requests access to the resource (Section 2). 2. The AS grants access to the resource (Section 3) with an access token (Section 3.2) usable at the RS. The access token response includes a token management URI. 3. The client instance presents the token (Section 7.2) to the RS. The RS validates the token and returns an appropriate response for the API. 4. When the access token is expired, the RS responds to the client instance with an error. Richer, et al. Expires 26 August 2021 [Page 18] Internet-Draft Grant Negotiation and Authorization Prot February 2021 5. The client instance calls the token management URI returned in (2) to rotate the access token (Section 6.1). The client instance presents the access token as well as the appropriate key. 6. The AS validates the rotation request including the signature and keys presented in (5) and returns a new access token (Section 3.2.1). The response includes a new access token and can also include updated token management information, which the client instance will store in place of the values returned in (2). 2. Requesting Access To start a request, the client instance sends JSON [RFC8259] document with an object as its root. Each member of the request object represents a different aspect of the client instance's request. Each field is described in detail in a section below. access_token (object / array of objects) Describes the rights and properties associated with the requested access token. Section 2.1 subject (object) Describes the information about the RO that the client instance is requesting to be returned directly in the response from the AS. Section 2.2 client (object / string) Describes the client instance that is making this request, including the key that the client instance will use to protect this request and any continuation requests at the AS and any user-facing information about the client instance used in interactions at the AS. Section 2.3 user (object / string) Identifies the end-user to the AS in a manner that the AS can verify, either directly or by interacting with the end-user to determine their status as the RO. Section 2.4 interact (object) Describes the modes that the client instance has for allowing the RO to interact with the AS and modes for the client instance to receive updates when interaction is complete. Section 2.5 capabilities (array of strings) Identifies named extension capabilities that the client instance can use, signaling to the AS which extensions it can use. Section 2.6 existing_grant (string) Identifies a previously-existing grant that the client instance is extending with this request. Section 2.7 Richer, et al. Expires 26 August 2021 [Page 19] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Additional members of this request object can be defined by extensions to this protocol as described in Section 2.8 A non-normative example of a grant request is below: { "access_token": { "access": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ] }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "key": { "proof": "jwsd", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeL...." } } }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return/123455", Richer, et al. Expires 26 August 2021 [Page 20] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "nonce": "LKLTI25DK82FX4T4QFZC" } }, "capabilities": ["ext1", "ext2"], "subject": { "sub_ids": ["iss_sub", "email"], "assertions": ["id_token"] } } The request MUST be sent as a JSON object in the body of the HTTP POST request with Content-Type "application/json", unless otherwise specified by the signature mechanism. 2.1. Requesting Access to Resources If the client instance is requesting one or more access tokens for the purpose of accessing an API, the client instance MUST include an "access_token" field. This field MUST be an object (for a single access token (Section 2.1.1)) or an array of these objects (for multiple access tokens (Section 2.1.2)), as described in the following sections. 2.1.1. Requesting a Single Access Token To request a single access token, the client instance sends an "acccess_token" object composed of the following fields. access (array of objects/strings) Describes the rights that the client instance is requesting for one or more access tokens to be used at RS's. This field is REQUIRED. Section 8 label (string) A unique name chosen by the client instance to refer to the resulting access token. The value of this field is opaque to the AS. If this field is included in the request, the AS MUST include the same label in the token response (Section 3.2). This field is REQUIRED if used as part of a multiple access token request (Section 2.1.2), and is OPTIONAL otherwise. flags (array of strings) A set of flags that indicate desired attributes or behavior to be attached to the access token by the AS. This field is OPTIONAL. The values of the "flags" field defined by this specification are as follows: bearer If this flag is included, the access token being requested is Richer, et al. Expires 26 August 2021 [Page 21] Internet-Draft Grant Negotiation and Authorization Prot February 2021 a bearer token. If this flag is omitted, the access token is bound to the key used by the client instance in this request, or the key's most recent rotation. Methods for presenting bound and bearer access tokens are described in Section 7.2. [[ See issue #38 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/38) ]] split If this flag is included, the client instance is capable of receiving a different number of tokens than specified in the token request (Section 2.1), including receiving multiple access tokens (Section 3.2.2) in response to any single token request (Section 2.1.1) or a different number of access tokens than requested in a multiple access token request (Section 2.1.2). The "label" fields of the returned additional tokens are chosen by the AS. The client instance MUST be able to tell from the token response where and how it can use each of the access tokens. [[ See issue #37 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/37) ]] Flag values MUST NOT be included more than once. Additional flags can be defined by extensions using a registry TBD (Section 12). In the following example, the client instance is requesting access to a complex resource described by a pair of access request object. Richer, et al. Expires 26 August 2021 [Page 22] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access_token": { "access": [ { "type": "photo-api", "actions": [ "read", "write", "delete" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, { "type": "walrus-access", "actions": [ "foo", "bar" ], "locations": [ "https://resource.other/" ], "datatypes": [ "data", "pictures", "walrus whiskers" ] } ], "label": "token1-23", "flags": [ "split" ] } If access is approved, the resulting access token is valid for the described resource and is bound to the client instance's key (or its most recent rotation). The token is labeled "token1-23" and could be split into multiple access tokens by the AS, if the AS chooses. The token response structure is described in Section 3.2.1. Richer, et al. Expires 26 August 2021 [Page 23] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2.1.2. Requesting Multiple Access Tokens To request multiple access tokens to be returned in a single response, the client instance sends an array of objects as the value of the "access_token" parameter. Each object MUST conform to the request format for a single access token request, as specified in requesting a single access token (Section 2.1.1). Additionally, each object in the array MUST include the "label" field, and all values of these fields MUST be unique within the request. If the client instance does not include a "label" value for any entry in the array, or the values of the "label" field are not unique within the array, the AS MUST return an error. The following non-normative example shows a request for two separate access tokens, "token1" and "token2". Richer, et al. Expires 26 August 2021 [Page 24] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access_token": [ { "label": "token1", "access": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ] }, { "label": "token2", "access": [ { "type": "walrus-access", "actions": [ "foo", "bar" ], "locations": [ "https://resource.other/" ], "datatypes": [ "data", "pictures", "walrus whiskers" ] } ], "flags": [ "bearer" ] } ] Richer, et al. Expires 26 August 2021 [Page 25] Internet-Draft Grant Negotiation and Authorization Prot February 2021 All approved access requests are returned in the multiple access token response (Section 3.2.2) structure using the values of the "label" fields in the request. 2.2. Requesting Subject Information If the client instance is requesting information about the RO from the AS, it sends a "subject" field as a JSON object. This object MAY contain the following fields (or additional fields defined in a registry TBD (Section 12)). sub_ids (array of strings) An array of subject identifier subject types requested for the RO, as defined by [I-D.ietf-secevent-subject-identifiers]. assertions (array of strings) An array of requested assertion formats. Possible values include "id_token" for an [OIDC] ID Token and "saml2" for a SAML 2 assertion. Additional assertion values are defined by a registry TBD (Section 12). [[ See issue #41 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/41) ]] "subject": { "sub_ids": [ "iss_sub", "email" ], "assertions": [ "id_token", "saml2" ] } The AS can determine the RO's identity and permission for releasing this information through interaction with the RO (Section 4), AS policies, or assertions presented by the client instance (Section 2.4). If this is determined positively, the AS MAY return the RO's information in its response (Section 3.4) as requested. Subject identifiers requested by the client instance serve only to identify the RO in the context of the AS and can't be used as communication channels by the client instance, as discussed in Section 3.4. The AS SHOULD NOT re-use subject identifiers for multiple different ROs. [[ See issue #42 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/42) ]] Note: the "sub_ids" and "assertions" request fields are independent of each other, and a returned assertion MAY omit a requested subject identifier. Richer, et al. Expires 26 August 2021 [Page 26] Internet-Draft Grant Negotiation and Authorization Prot February 2021 [[ See issue #43 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/43) ]] 2.3. Identifying the Client Instance When sending a non-continuation request to the AS, the client instance MUST identify itself by including the "client" field of the request and by signing the request as described in Section 7.3. Note that for a continuation request (Section 5), the client instance is identified by its association with the request being continued and so this field is not sent under those circumstances. When client instance information is sent by value, the "client" field of the request consists of a JSON object with the following fields. key (object / string) The public key of the client instance to be used in this request as described in Section 7.1 or a reference to a key as described in Section 7.1.1. This field is REQUIRED. class_id (string) An identifier string that the AS can use to identify the client software comprising this client instance. The contents and format of this field are up to the AS. This field is OPTIONAL. display (object) An object containing additional information that the AS MAY display to the RO during interaction, authorization, and management. This field is OPTIONAL. "client": { "key": { "proof": "httpsig", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..." }, "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFA..." }, "class_id": "web-server-1234", "display": { "name": "My Client Display Name", "uri": "https://example.net/client" } } Additional fields are defined in a registry TBD (Section 12). Richer, et al. Expires 26 August 2021 [Page 27] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The client instance MUST prove possession of any presented key by the "proof" mechanism associated with the key in the request. Proof types are defined in a registry TBD (Section 12) and an initial set of methods is described in Section 7.3. Note that the AS MAY know the client instance's public key ahead of time, and the AS MAY apply different policies to the request depending on what has been registered against that key. If the same public key is sent by value on subsequent access requests, the AS SHOULD treat these requests as coming from the same client instance for purposes of identification, authentication, and policy application. If the AS does not know the client instance's public key ahead of time, the AS MAY accept or reject the request based on AS policy, attestations within the "client" request, and other mechanisms. [[ See issue #44 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/44) ]] 2.3.1. Identifying the Client Instance by Reference If the client instance has an instance identifier that the AS can use to determine appropriate key information, the client instance can send this value in the "instance_id" field. The instance identifier MAY be assigned to a client instance at runtime through the Section 3.5 or MAY be obtained in another fashion, such as a static registration process at the AS. instance_id (string) An identifier string that the AS can use to identify the particular instance of this client software. The content and structure of this identifier is opaque to the client instance. "client": { "instance_id": "client-541-ab" } If there are no additional fields to send, the client instance MAY send the instance identifier as a direct reference value in lieu of the object. "client": "client-541-ab" When the AS receives a request with an instance identifier, the AS MUST ensure that the key used to sign the request (Section 7.3) is associated with the instance identifier. Richer, et al. Expires 26 August 2021 [Page 28] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the "instance_id" field is sent, it MUST NOT be accompanied by other fields unless such fields are explicitly marked safe for inclusion alongside the instance identifier. [[ See issue #45 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/45) ]] If the AS does not recognize the instance identifier, the request MUST be rejected with an error. If the client instance is identified in this manner, the registered key for the client instance MAY be a symmetric key known to the AS. The client instance MUST NOT send a symmetric key by value in the request, as doing so would expose the key directly instead of proving possession of it. 2.3.2. Providing Displayable Client Instance Information If the client instance has additional information to display to the RO during any interactions at the AS, it MAY send that information in the "display" field. This field is a JSON object that declares information to present to the RO during any interactive sequences. name (string) Display name of the client software uri (string) User-facing web page of the client software logo_uri (string) Display image to represent the client software "display": { "name": "My Client Display Name", "uri": "https://example.net/client" } [[ See issue #48 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/48) ]] Additional display fields are defined by a registry TBD (Section 12). The AS SHOULD use these values during interaction with the RO. The values are for informational purposes only and MUST NOT be taken as authentic proof of the client instance's identity or source. The AS MAY restrict display values to specific client instances, as identified by their keys in Section 2.3. Richer, et al. Expires 26 August 2021 [Page 29] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2.3.3. Authenticating the Client Instance If the presented key is known to the AS and is associated with a single instance of the client software, the process of presenting a key and proving possession of that key is sufficient to authenticate the client instance to the AS. The AS MAY associate policies with the client instance identified by this key, such as limiting which resources can be requested and which interaction methods can be used. For example, only specific client instances with certain known keys might be trusted with access tokens without the AS interacting directly with the RO as in Appendix C.3. The presentation of a key allows the AS to strongly associate multiple successive requests from the same client instance with each other. This is true when the AS knows the key ahead of time and can use the key to authenticate the client instance, but also if the key is ephemeral and created just for this series of requests. As such the AS MAY allow for client instances to make requests with unknown keys. This pattern allows for ephemeral client instances, such as single-page applications, and client software with many individual long-lived instances, such as mobile applications, to generate key pairs per instance and use the keys within the protocol without having to go through a separate registration step. The AS MAY limit which capabilities are made available to client instances with unknown keys. For example, the AS could have a policy saying that only previously-registered client instances can request particular resources, or that all client instances with unknown keys have to be interactively approved by an RO. 2.4. Identifying the User If the client instance knows the identity of the end-user through one or more identifiers or assertions, the client instance MAY send that information to the AS in the "user" field. The client instance MAY pass this information by value or by reference. sub_ids (array of objects) An array of subject identifiers for the end-user, as defined by [I-D.ietf-secevent-subject-identifiers]. assertions (object) An object containing assertions as values keyed on the assertion type defined by a registry TBD (Section 12). Possible keys include "id_token" for an [OIDC] ID Token and "saml2" for a SAML 2 assertion. Additional assertion values are defined by a registry TBD (Section 12). [[ See issue #41 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/41) ]] Richer, et al. Expires 26 August 2021 [Page 30] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "user": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com" } ], "assertions": { "id_token": "eyj..." } } Subject identifiers are hints to the AS in determining the RO and MUST NOT be taken as declarative statements that a particular RO is present at the client instance and acting as the end-user. Assertions SHOULD be validated by the AS. [[ See issue #49 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/49) ]] If the identified end-user does not match the RO present at the AS during an interaction step, the AS SHOULD reject the request with an error. [[ See issue #50 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/50) ]] If the AS trusts the client instance to present verifiable assertions, the AS MAY decide, based on its policy, to skip interaction with the RO, even if the client instance provides one or more interaction modes in its request. 2.4.1. Identifying the User by Reference User reference identifiers can be dynamically issued by the AS (Section 3.5) to allow the client instance to represent the same end- user to the AS over subsequent requests. If the client instance has a reference for the end-user at this AS, the client instance MAY pass that reference as a string. The format of this string is opaque to the client instance. "user": "XUT2MFM1XBIKJKSDU8QM" User reference identifiers are not intended to be human-readable user identifiers or structured assertions. For the client instance to send either of these, use the full user request object (Section 2.4) instead. [[ See issue #51 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/51) ]] Richer, et al. Expires 26 August 2021 [Page 31] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the AS does not recognize the user reference, it MUST return an error. 2.5. Interacting with the User Many times, the AS will require interaction with the RO in order to approve a requested delegation to the client instance for both access to resources and direct subject information. Many times the end-user using the client instance is the same person as the RO, and the client instance can directly drive interaction with the AS by redirecting the end-user on the same device, or by launching an application. Other times, the client instance can provide information to start the RO's interaction on a secondary device, or the client instance will wait for the RO to approve the request asynchronously. The client instance could also be signaled that interaction has completed by the AS making callbacks. To facilitate all of these modes, the client instance declares the means that it can interact using the "interact" field. The "interact" field is a JSON object with three keys whose values declare how the client can initiate and complete the request, as well as provide hints to the AS about user preferences such as locale. A client instance MUST NOT declare an interaction mode it does not support. The client instance MAY send multiple modes in the same request. There is no preference order specified in this request. An AS MAY respond to any, all, or none of the presented interaction modes (Section 3.3) in a request, depending on its capabilities and what is allowed to fulfill the request. start (list of strings/objects) Indicates how the client instance can start an interaction. finish (object) Indicates how the client instance can receive an indication that interaction has finished at the AS. hints (object) Provides additional information to inform the interaction process at the AS. The "interact" field MUST contain the "start" key, and MAY contain the "finish" and "hints" keys. The value of each key is an array which contains strings or JSON objects as defined below. 2.5.1. Start Mode Definitions This specification defines the following interaction start modes as an array of string values under the "start" key: "redirect" Indicates that the client instance can direct the end- Richer, et al. Expires 26 August 2021 [Page 32] Internet-Draft Grant Negotiation and Authorization Prot February 2021 user to an arbitrary URL at the AS for interaction. Section 2.5.5.1 "app" Indicates that the client instance can launch an application on the end-user's device for interaction. Section 2.5.5.2 "user_code" Indicates that the client instance can communicate a human-readable short code to the end-user for use with a stable URL at the AS. Section 2.5.5.3 2.5.2. Finish Mode Definitions This specification defines the following interaction completion methods: "redirect" Indicates that the client instance can receive a redirect from the end-user's device after interaction with the RO has concluded. Section 2.5.6.1 "push" Indicates that the client instance can receive an HTTP POST request from the AS after interaction with the RO has concluded. Section 2.5.6.2 2.5.3. Hint Definitions This specification defines the following properties under the "hints" key: ui_locales (array of strings) Indicates the end-user's preferred locales that the AS can use during interaction, particularly before the RO has authenticated. Section 2.5.7.1 The following sections detail requests for interaction modes. Additional interaction modes are defined in a registry TBD (Section 12). 2.5.4. Example Interactions In this non-normative example, the client instance is indicating that it can redirect (Section 2.5.5.1) the end-user to an arbitrary URL and can receive a redirect (Section 2.5.6.1) through a browser request. Richer, et al. Expires 26 August 2021 [Page 33] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } In this non-normative example, the client instance is indicating that it can display a user code (Section 2.5.5.3) and direct the end-user to an arbitrary URL (Section 2.5.5.1) on a secondary device, but it cannot accept a redirect or push callback. "interact": { "start": ["redirect", "user_code"] } If the client instance does not provide a suitable interaction mechanism, the AS cannot contact the RO asynchronously, and the AS determines that interaction is required, then the AS SHOULD return an error since the client instance will be unable to complete the request without authorization. The AS SHOULD apply suitable timeouts to any interaction mechanisms provided, including user codes and redirection URLs. The client instance SHOULD apply suitable timeouts to any callback URLs. 2.5.5. Start Interaction Modes 2.5.5.1. Redirect to an Arbitrary URL If the client instance is capable of directing the end-user to a URL defined by the AS at runtime, the client instance indicates this by sending the "redirect" field with the boolean value "true". The means by which the client instance will activate this URL is out of scope of this specification, but common methods include an HTTP redirect, launching a browser on the end-user's device, providing a scannable image encoding, and printing out a URL to an interactive console. "interact": { "start": ["redirect"] } If this interaction mode is supported for this client instance and request, the AS returns a redirect interaction response Section 3.3.1. Richer, et al. Expires 26 August 2021 [Page 34] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2.5.5.2. Open an Application-specific URL If the client instance can open a URL associated with an application on the end-user's device, the client instance indicates this by sending the "app" field with boolean value "true". The means by which the client instance determines the application to open with this URL are out of scope of this specification. "interact": { "start": ["app"] } If this interaction mode is supported for this client instance and request, the AS returns an app interaction response with an app URL payload Section 3.3.2. [[ See issue #54 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/54) ]] 2.5.5.3. Display a Short User Code If the client instance is capable of displaying or otherwise communicating a short, human-entered code to the RO, the client instance indicates this by sending the "user_code" field with the boolean value "true". This code is to be entered at a static URL that does not change at runtime, as described in Section 3.3.4. "interact": { "start": ["user_code"] } If this interaction mode is supported for this client instance and request, the AS returns a user code and interaction URL as specified in Section 4.2. 2.5.6. Finish Interaction Modes If the client instance is capable of receiving a message from the AS indicating that the RO has completed their interaction, the client instance indicates this by sending the following members of an object under the "finish" key. method (string) REQUIRED. The callback method that the AS will use to contact the client instance. Valid values include "redirect" Section 2.5.6.1 and "push" Section 2.5.6.2, with other values defined by a registry TBD (Section 12). uri (string) REQUIRED. Indicates the URI that the AS will either Richer, et al. Expires 26 August 2021 [Page 35] Internet-Draft Grant Negotiation and Authorization Prot February 2021 send the RO to after interaction or send an HTTP POST request. This URI MAY be unique per request and MUST be hosted by or accessible by the client instance. This URI MUST NOT contain any fragment component. This URI MUST be protected by HTTPS, be hosted on a server local to the RO's browser ("localhost"), or use an application-specific URI scheme. If the client instance needs any state information to tie to the front channel interaction response, it MUST use a unique callback URI to link to that ongoing state. The allowable URIs and URI patterns MAY be restricted by the AS based on the client instance's presented key information. The callback URI SHOULD be presented to the RO during the interaction phase before redirect. nonce (string) REQUIRED. Unique value to be used in the calculation of the "hash" query parameter sent to the callback URL, must be sufficiently random to be unguessable by an attacker. MUST be generated by the client instance as a unique value for this request. hash_method (string) OPTIONAL. The hash calculation mechanism to be used for the callback hash in Section 4.4.3. Can be one of "sha3" or "sha2". If absent, the default value is "sha3". [[ See issue #56 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/56) ]] If this interaction mode is supported for this client instance and request, the AS returns a nonce for use in validating the callback response (Section 3.3.3). Requests to the callback URI MUST be processed as described in Section 4.4, and the AS MUST require presentation of an interaction callback reference as described in Section 5.1. [[ See issue #58 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/58) ]] [[ See issue #59 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/59) ]] 2.5.6.1. Receive an HTTP Callback Through the Browser A finish "method" value of "redirect" indicates that the client instance will expect a request from the RO's browser using the HTTP method GET as described in Section 4.4.1. Richer, et al. Expires 26 August 2021 [Page 36] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "interact": { "finish": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } Requests to the callback URI MUST be processed by the client instance as described in Section 4.4.1. Since the incoming request to the callback URL is from the RO's browser, this method is usually used when the RO and end-user are the same entity. As such, the client instance MUST ensure the end-user is present on the request to prevent substitution attacks. 2.5.6.2. Receive an HTTP Direct Callback A finish "method" value of "push" indicates that the client instance will expect a request from the AS directly using the HTTP method POST as described in Section 4.4.2. "interact": { "finish": { "method": "push", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } Requests to the callback URI MUST be processed by the client instance as described in Section 4.4.2. Since the incoming request to the callback URL is from the AS and not from the RO's browser, the client instance MUST NOT require the end- user to be present on the incoming HTTP request. [[ See issue #60 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/60) ]] 2.5.7. Hints The "hints" key is an object describing one or more suggestions from the client instance that the AS can use to help drive user interaction. Richer, et al. Expires 26 August 2021 [Page 37] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2.5.7.1. Indicate Desired Interaction Locales If the client instance knows the end-user's locale and language preferences, the client instance can send this information to the AS using the "ui_locales" field with an array of locale strings as defined by [RFC5646]. "interact": { "hints": { "ui_locales": ["en-US", "fr-CA"] } } If possible, the AS SHOULD use one of the locales in the array, with preference to the first item in the array supported by the AS. If none of the given locales are supported, the AS MAY use a default locale. 2.5.8. Extending Interaction Modes Additional interaction modes are defined in a registry TBD (Section 12). 2.6. Declaring Client Capabilities If the client software supports extension capabilities, the client instance MAY present them to the AS in the "capabilities" field. This field is an array of strings representing specific extensions and capabilities, as defined by a registry TBD (Section 12). "capabilities": ["ext1", "ext2"] 2.7. Referencing an Existing Grant Request If the client instance has a reference handle from a previously granted request, it MAY send that reference in the "existing_grant" field. This field is a single string consisting of the "value" of the "access_token" returned in a previous request's continuation response (Section 3.1). "existing_grant": "80UPRY5NM33OMUKMKSKU" The AS MUST dereference the grant associated with the reference and process this request in the context of the referenced one. The AS MUST NOT alter the existing grant associated with the reference. [[ See issue #62 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/62) ]] Richer, et al. Expires 26 August 2021 [Page 38] Internet-Draft Grant Negotiation and Authorization Prot February 2021 2.8. Extending The Grant Request The request object MAY be extended by registering new items in a registry TBD (Section 12). Extensions SHOULD be orthogonal to other parameters. Extensions MUST document any aspects where the extension item affects or influences the values or behavior of other request and response objects. 3. Grant Response In response to a client instance's request, the AS responds with a JSON object as the HTTP entity body. Each possible field is detailed in the sections below continue (object) Indicates that the client instance can continue the request by making one or more continuation requests. Section 3.1 access_token (object / array of objects) A single access token or set of access tokens that the client instance can use to call the RS on behalf of the RO. Section 3.2.1 interact (object) Indicates that interaction through some set of defined mechanisms needs to take place. Section 3.3 subject (object) Claims about the RO as known and declared by the AS. Section 3.4 instance_id (string) An identifier this client instance can use to identify itself when making future requests. Section 3.5 user_handle (string) An identifier this client instance can use to identify its current end-user when making future requests. Section 3.5 error (object) An error code indicating that something has gone wrong. Section 3.6 In this example, the AS is returning an interaction URL (Section 3.3.1), a callback nonce (Section 3.3.3), and a continuation response (Section 3.1). Richer, et al. Expires 26 August 2021 [Page 39] Internet-Draft Grant Negotiation and Authorization Prot February 2021 { "interact": { "redirect": "https://server.example.com/interact/4CF492MLVMSW9MKMXKHQ", "push": "MBDOFXG4Y5CVJCX821LH" }, "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/tx" } } In this example, the AS is returning a bearer access token (Section 3.2.1) with a management URL and a subject identifier (Section 3.4) in the form of an email address. { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L" }, "subject": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com", } ] } } 3.1. Request Continuation If the AS determines that the request can be continued with additional requests, it responds with the "continue" field. This field contains a JSON object with the following properties. uri (string) REQUIRED. The URI at which the client instance can make continuation requests. This URI MAY vary per request, or MAY be stable at the AS if the AS includes an access token. The client instance MUST use this value exactly as given when making a continuation request (Section 5). wait (integer) RECOMMENDED. The amount of time in integer seconds the client instance SHOULD wait after receiving this continuation handle and calling the URI. Richer, et al. Expires 26 August 2021 [Page 40] Internet-Draft Grant Negotiation and Authorization Prot February 2021 access_token (object) REQUIRED. A unique access token for continuing the request, in the format specified in Section 3.2.1. This access token MUST be bound to the client instance's key used in the request and MUST NOT be a "bearer" token. As a consequence, the "bound" field of this access token is always the boolean value "true" and the "key" field MUST be omitted. This access token MUST NOT be usable at resources outside of the AS. The client instance MUST present the access token in all requests to the continuation URI as described in Section 7.2. [[ See issue #66 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/66) ]] { "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue", "wait": 60 } } The client instance can use the values of this field to continue the request as described in Section 5. Note that the client instance MUST sign all continuation requests with its key as described in Section 7.3 and MUST present the access token in its continuation request. This field SHOULD be returned when interaction is expected, to allow the client instance to follow up after interaction has been concluded. 3.2. Access Tokens If the AS has successfully granted one or more access tokens to the client instance, the AS responds with the "access_token" field. This field contains either a single access token as described in Section 3.2.1 or an array of access tokens as described in Section 3.2.2. The client instance uses any access tokens in this response to call the RS as described in Section 7.2. Richer, et al. Expires 26 August 2021 [Page 41] Internet-Draft Grant Negotiation and Authorization Prot February 2021 3.2.1. Single Access Token If the client instance has requested a single access token and the AS has granted that access token, the AS responds with the "access_token" field. The value of this field is an object with the following properties. value (string) REQUIRED. The value of the access token as a string. The value is opaque to the client instance. The value SHOULD be limited to ASCII characters to facilitate transmission over HTTP headers within other protocols without requiring additional encoding. bound (boolean) RECOMMENDED. Flag indicating if the token is bound to the client instance's key. If the boolean value is "true" or the field is omitted, and the "key" field is omitted, the token is bound to the key used by the client instance (Section 2.3) in its request for access. If the boolean value is "true" or the field is omitted, and the "key" field is present, the token is bound to the key and proofing mechanism indicated in the "key" field. If the boolean value is "false", the token is a bearer token with no key bound to it and the "key" field MUST be omitted. label (string) REQUIRED for multiple access tokens, OPTIONAL for single access token. The value of the "label" the client instance provided in the associated token request (Section 2.1), if present. If the token has been split by the AS, the value of the "label" field is chosen by the AS and the "split" field is included and set to "true". manage (string) OPTIONAL. The management URI for this access token. If provided, the client instance MAY manage its access token as described in Section 6. This management URI is a function of the AS and is separate from the RS the client instance is requesting access to. This URI MUST NOT include the access token value and SHOULD be different for each access token issued in a request. access (array of objects/strings) RECOMMENDED. A description of the rights associated with this access token, as defined in Section 8. If included, this MUST reflect the rights associated with the issued access token. These rights MAY vary from what was requested by the client instance. expires_in (integer) OPTIONAL. The number of seconds in which the access will expire. The client instance MUST NOT use the access token past this time. An RS MUST NOT accept an access token past this time. Note that the access token MAY be revoked by the AS or RS at any point prior to its expiration. Richer, et al. Expires 26 August 2021 [Page 42] Internet-Draft Grant Negotiation and Authorization Prot February 2021 key (object / string) OPTIONAL. The key that the token is bound to, if different from the client instance's presented key. The key MUST be an object or string in a format described in Section 7.1, describing a public key to which the client instance can use the associated private key. The client instance MUST be able to dereference or process the key information in order to be able to sign the request. durable (boolean) OPTIONAL. Flag indicating a hint of AS behavior on token rotation. If this flag is set to the value "true", then the client instance can expect a previously-issued access token to continue to work after it has been rotated (Section 6.1) or the underlying grant request has been modified (Section 5.3), resulting in the issuance of new access tokens. If this flag is set to the boolean value "false" or is omitted, the client instance can anticipate a given access token will stop working after token rotation or grant request modification. Note that a token flagged as "durable" can still expire or be revoked through any normal means. split (boolean) OPTIONAL. Flag indicating that this token was generated by issuing multiple access tokens in response to one of the client instance's token request (Section 2.1) objects. This behavior MUST NOT be used unless the client instance has specifically requested it by use of the "split" flag. The following non-normative example shows a single access token bound to the client instance's key used in the initial request, with a management URL, and that has access to three described resources (one using an object and two described by reference strings). Richer, et al. Expires 26 August 2021 [Page 43] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata" ] } The following non-normative example shows a single bearer access token with access to two described resources. "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "access": [ "finance", "medical" ] } If the client instance requested a single access token (Section 2.1.1), the AS MUST NOT respond with the multiple access token structure unless the client instance sends the "split" flag as described in Section 2.1.1. If the AS has split the access token response, the response MUST include the "split" flag set to "true". [[ See issue #69 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/69) ]] Richer, et al. Expires 26 August 2021 [Page 44] Internet-Draft Grant Negotiation and Authorization Prot February 2021 3.2.2. Multiple Access Tokens If the client instance has requested multiple access tokens and the AS has granted at least one of them, the AS responds with the "access_token" field. The value of this field is a JSON array, the members of which are distinct access tokens as described in Section 3.2.1. Each object MUST have a unique "label" field, corresponding to the token labels chosen by the client instance in the multiple access token request (Section 2.1.2). In this non-normative example, two bearer tokens are issued under the names "token1" and "token2", and only the first token has a management URL associated with it. "access_token": [ { "label": "token1", "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [ "finance" ] }, { "label": "token2", "value": "UFGLO2FDAFG7VGZZPJ3IZEMN21EVU71FHCARP4J1", "bound": true, "access": [ "medical" ] } } Each access token corresponds to one of the objects in the "access_token" array of the client instance's request (Section 2.1.2). The multiple access token response MUST be used when multiple access tokens are requested, even if only one access token is issued as a result of the request. The AS MAY refuse to issue one or more of the requested access tokens, for any reason. In such cases the refused token is omitted from the response and all of the other issued access tokens are included in the response the requested names appropriate names. If the client instance requested multiple access tokens (Section 2.1.2), the AS MUST NOT respond with a single access token structure, even if only a single access token is granted. In such cases, the AS responds with a multiple access token structure containing one access token. Richer, et al. Expires 26 August 2021 [Page 45] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the AS has split the access token response, the response MUST include the "split" flag set to "true". "access_token": [ { "label": "split-1", "value": "8N6BW7OZB8CDFONP219-OS9M2PMHKUR64TBRP1LT0", "bound": true, "split": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [ "fruits" ] }, { "label": "split-2", "value": "FG7VGZZPJ3IZEMN21EVU71FHCAR-UFGLO2FDAP4J1", "bound": true, "split": true, "access": [ "vegetables" ] } } Each access token MAY be bound to different keys with different proofing mechanisms. If token management (Section 6) is allowed, each access token SHOULD have different "manage" URIs. [[ See issue #70 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/70) ]] 3.3. Interaction Modes If the client instance has indicated a capability to interact with the RO in its request (Section 2.5), and the AS has determined that interaction is both supported and necessary, the AS responds to the client instance with any of the following values in the "interact" field of the response. There is no preference order for interaction modes in the response, and it is up to the client instance to determine which ones to use. All supported interaction methods are included in the same "interact" object. redirect (string) Redirect to an arbitrary URL. Section 3.3.1 app (string) Launch of an application URL. Section 3.3.2 finish (string) A nonce used by the client instance to verify the callback after interaction is completed. Section 3.3.3 Richer, et al. Expires 26 August 2021 [Page 46] Internet-Draft Grant Negotiation and Authorization Prot February 2021 user_code (object) Display a short user code. Section 3.3.4 Additional interaction mode responses can be defined in a registry TBD (Section 12). The AS MUST NOT respond with any interaction mode that the client instance did not indicate in its request. The AS MUST NOT respond with any interaction mode that the AS does not support. Since interaction responses include secret or unique information, the AS SHOULD respond to each interaction mode only once in an ongoing request, particularly if the client instance modifies its request (Section 5.3). 3.3.1. Redirection to an arbitrary URL If the client instance indicates that it can redirect to an arbitrary URL (Section 2.5.5.1) and the AS supports this mode for the client instance's request, the AS responds with the "redirect" field, which is a string containing the URL to direct the end-user to. This URL MUST be unique for the request and MUST NOT contain any security- sensitive information. "interact": { "redirect": "https://interact.example.com/4CF492MLVMSW9MKMXKHQ" } The interaction URL returned represents a function of the AS but MAY be completely distinct from the URL the client instance uses to request access (Section 2), allowing an AS to separate its user- interactive functionality from its back-end security functionality. [[ See issue #72 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/72) ]] The client instance sends the end-user to the URL to interact with the AS. The client instance MUST NOT alter the URL in any way. The means for the client instance to send the end-user to this URL is out of scope of this specification, but common methods include an HTTP redirect, launching the system browser, displaying a scannable code, or printing out the URL in an interactive console. Richer, et al. Expires 26 August 2021 [Page 47] Internet-Draft Grant Negotiation and Authorization Prot February 2021 3.3.2. Launch of an application URL If the client instance indicates that it can launch an application URL (Section 2.5.5.2) and the AS supports this mode for the client instance's request, the AS responds with the "app" field, which is a string containing the URL to direct the end-user to. This URL MUST be unique for the request and MUST NOT contain any security-sensitive information. "interact": { "app": "https://app.example.com/launch?tx=4CF492MLV" } The client instance launches the URL as appropriate on its platform, and the means for the client instance to launch this URL is out of scope of this specification. The client instance MUST NOT alter the URL in any way. The client instance MAY attempt to detect if an installed application will service the URL being sent before attempting to launch the application URL. [[ See issue #71 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/71) ]] 3.3.3. Post-interaction Callback to a Client Instance Accessible URL If the client instance indicates that it can receive a post-interaction redirect or push at a URL (Section 2.5.6) and the AS supports this mode for the client instance's request, the AS responds with a "finish" field containing a nonce that the client instance will use in validating the callback as defined in Section 4.4. "interact": { "finish": "MBDOFXG4Y5CVJCX821LH" } When the RO completes interaction at the AS, the AS MUST either redirect the RO's browser or send an HTTP POST to the client instance's callback URL using the method indicated in the interaction request (Section 2.5.6) as described in Section 4.4. If the AS returns a nonce, the client instance MUST NOT continue a grant request before it receives the associated interaction reference on the callback URI. Richer, et al. Expires 26 August 2021 [Page 48] Internet-Draft Grant Negotiation and Authorization Prot February 2021 3.3.4. Display of a Short User Code If the client instance indicates that it can display a short user-typeable code (Section 2.5.5.3) and the AS supports this mode for the client instance's request, the AS responds with a "user_code" field. This field is an object that contains the following members. code (string) REQUIRED. A unique short code that the user can type into an authorization server. This string MUST be case- insensitive, MUST consist of only easily typeable characters (such as letters or numbers). The time in which this code will be accepted SHOULD be short lived, such as several minutes. It is RECOMMENDED that this code be no more than eight characters in length. url (string) RECOMMENDED. The interaction URL that the client instance will direct the RO to. This URL MUST be stable at the AS such that client instance's can be statically configured with it. "interact": { "user_code": { "code": "A1BC-3DFF", "url": "https://srv.ex/device" } } The client instance MUST communicate the "code" to the end-user in some fashion, such as displaying it on a screen or reading it out audibly. The "code" is a one-time-use credential that the AS uses to identify the pending request from the client instance. When the RO enters this code (Section 4.2) into the AS, the AS MUST determine the pending request that it was associated with. If the AS does not recognize the entered code, the AS MUST display an error to the user. If the AS detects too many unrecognized codes entered, it SHOULD display an error to the user. Richer, et al. Expires 26 August 2021 [Page 49] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The client instance SHOULD also communicate the URL if possible to facilitate user interaction, but since the URL should be stable, the client instance should be able to safely decide to not display this value. As this interaction mode is designed to facilitate interaction via a secondary device, it is not expected that the client instance redirect the end-user to the URL given here at runtime. Consequently, the URL needs to be stable enough that a client instance could be statically configured with it, perhaps referring the end-user to the URL via documentation instead of through an interactive means. If the client instance is capable of communicating an arbitrary URL to the end-user, such as through a scannable code, the client instance can use the "redirect" (Section 2.5.5.1) mode for this purpose instead of or in addition to the user code mode. The interaction URL returned represents a function of the AS but MAY be completely distinct from the URL the client instance uses to request access (Section 2), allowing an AS to separate its user- interactive functionality from its back-end security functionality. [[ See issue #72 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/72) ]] 3.3.5. Extending Interaction Mode Responses Extensions to this specification can define new interaction mode responses in a registry TBD (Section 12). Extensions MUST document the corresponding interaction request. 3.4. Returning User Information If information about the RO is requested and the AS grants the client instance access to that data, the AS returns the approved information in the "subject" response field. This field is an object with the following OPTIONAL properties. sub_ids (array of objects) An array of subject identifiers for the RO, as defined by [I-D.ietf-secevent-subject-identifiers]. assertions (object) An object containing assertions as values keyed on the assertion type defined by a registry TBD (Section 12). [[ See issue #41 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/41) ]] updated_at (string) Timestamp as an ISO8610 date string, indicating Richer, et al. Expires 26 August 2021 [Page 50] Internet-Draft Grant Negotiation and Authorization Prot February 2021 when the identified account was last updated. The client instance MAY use this value to determine if it needs to request updated profile information through an identity API. The definition of such an identity API is out of scope for this specification. "subject": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com", } ], "assertions": { "id_token": "eyj..." } } The AS MUST return the "subject" field only in cases where the AS is sure that the RO and the end-user are the same party. This can be accomplished through some forms of interaction with the RO (Section 4). Subject identifiers returned by the AS SHOULD uniquely identify the RO at the AS. Some forms of subject identifier are opaque to the client instance (such as the subject of an issuer and subject pair), while others forms (such as email address and phone number) are intended to allow the client instance to correlate the identifier with other account information at the client instance. The client instance MUST NOT request or use any returned subject identifiers for communication purposes (see Section 2.2). That is, a subject identifier returned in the format of an email address or a phone number only identifies the RO to the AS and does not indicate that the AS has validated that the represented email address or phone number in the identifier is suitable for communication with the current user. To get such information, the client instance MUST use an identity protocol to request and receive additional identity claims. The details of an identity protocol and associated schema are outside the scope of this specification. [[ See issue #75 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/75) ]] Extensions to this specification MAY define additional response properties in a registry TBD (Section 12). 3.5. Returning Dynamically-bound Reference Handles Many parts of the client instance's request can be passed as either a value or a reference. The use of a reference in place of a value allows for a client instance to optimize requests to the AS. Richer, et al. Expires 26 August 2021 [Page 51] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Some references, such as for the client instance's identity (Section 2.3.1) or the requested resources (Section 8.1), can be managed statically through an admin console or developer portal provided by the AS or RS. The developer of the client software can include these values in their code for a more efficient and compact request. If desired, the AS MAY also generate and return some of these references dynamically to the client instance in its response to facilitate multiple interactions with the same software. The client instance SHOULD use these references in future requests in lieu of sending the associated data value. These handles are intended to be used on future requests. Dynamically generated handles are string values that MUST be protected by the client instance as secrets. Handle values MUST be unguessable and MUST NOT contain any sensitive information. Handle values are opaque to the client instance. All dynamically generated handles are returned as fields in the root JSON object of the response. This specification defines the following dynamic handle returns, additional handles can be defined in a registry TBD (Section 12). instance_id (string) A string value used to represent the information in the "client" object that the client instance can use in a future request, as described in Section 2.3.1. user_handle (string) A string value used to represent the current user. The client instance can use in a future request, as described in Section 2.4.1. This non-normative example shows two handles along side an issued access token. { "user_handle": "XUT2MFM1XBIKJKSDU8QM", "instance_id": "7C7C4AZ9KHRS6X63AJAO", "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true } } [[ See issue #77 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/77) ]] Richer, et al. Expires 26 August 2021 [Page 52] Internet-Draft Grant Negotiation and Authorization Prot February 2021 [[ See issue #78 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/78) ]] 3.6. Error Response If the AS determines that the request cannot be issued for any reason, it responds to the client instance with an error message. error (string) The error code. { "error": "user_denied" } The error code is one of the following, with additional values available in a registry TBD (Section 12): user_denied The RO denied the request. too_fast The client instance did not respect the timeout in the wait response. unknown_request The request referenced an unknown ongoing access request. [[ See issue #79 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/79) ]] 3.7. Extending the Response Extensions to this specification MAY define additional fields for the grant response in a registry TBD (Section 12). 4. Interaction at the AS If the client instance indicates that it is capable of driving interaction with the RO in its request (Section 2.5), and the AS determines that interaction is required and responds to one or more of the client instance's interaction modes, the client instance SHOULD initiate one of the returned interaction modes in the response (Section 3.3). When the RO is interacting with the AS, the AS MAY perform whatever actions it sees fit, including but not limited to: * authenticate the current user (who may be the end-user) as the RO Richer, et al. Expires 26 August 2021 [Page 53] Internet-Draft Grant Negotiation and Authorization Prot February 2021 * gather consent and authorization from the RO for access to requested resources and direct information * allow the RO to modify the parameters of the request (such as disallowing some requested resources or specifying an account or record) * provide warnings to the RO about potential attacks or negative effects of the requested information 4.1. Interaction at a Redirected URI When the RO is directed to the AS through the "redirect" (Section 3.3.1) mode, the AS can interact with the RO through their web browser to authenticate the user as an RO and gather their consent. Note that since the client instance does not add any parameters to the URL, the AS MUST determine the grant request being referenced from the URL value itself. If the URL cannot be associated with a currently active request, the AS MUST display an error to the RO and MUST NOT attempt to redirect the RO back to any client instance even if a redirect is supplied (Section 2.5.6.1). The interaction URL MUST be reachable from the RO's browser, though note that the RO MAY open the URL on a separate device from the client instance itself. The interaction URL MUST be accessible from an HTTP GET request, and MUST be protected by HTTPS or equivalent means. With this method, it is common for the RO to be the same party as the end-user, since the client instance has to communicate the redirection URI to the end-user. 4.2. Interaction at the User Code URI When the RO is directed to the AS through the "user_code" (Section 3.3.4) mode, the AS can interact with the RO through their web browser to collect the user code, authenticate the user as an RO, and gather their consent. Note that since the URL itself is static, the AS MUST determine the grant request being referenced from the user code value itself. If the user code cannot be associated with a currently active request, the AS MUST display an error to the RO and MUST NOT attempt to redirect the RO back to any client instance even if a redirect is supplied (Section 2.5.6.1). The user code URL MUST be reachable from the RO's browser, though note that the RO MAY open the URL on a separate device from the client instance itself. The user code URL MUST be accessible from an HTTP GET request, and MUST be protected by HTTPS or equivalent means. Richer, et al. Expires 26 August 2021 [Page 54] Internet-Draft Grant Negotiation and Authorization Prot February 2021 While it is common for the RO to be the same party as the end-user, since the client instance has to communicate the user code to someone, there are cases where the end-user and RO are separate parties and the authorization happens asynchronously. 4.3. Interaction through an Application URI When the client instance successfully launches an application through the "app" mode (Section 3.3.2), the AS interacts with the RO through that application to authenticate the user as the RO and gather their consent. The details of this interaction are out of scope for this specification. 4.4. Post-Interaction Completion Upon completing an interaction with the RO, if a "callback" (Section 3.3.3) mode is available with the current request, the AS MUST follow the appropriate method at the end of interaction to allow the client instance to continue. If this mode is not available, the AS SHOULD instruct the RO to return to their client instance upon completion. Note that these steps still take place in most error cases, such as when the RO has denied access. This pattern allows the client instance to potentially recover from the error state without restarting the request from scratch by modifying its request or providing additional information directly to the AS. The AS MUST create an interaction reference and associate that reference with the current interaction and the underlying pending request. This value MUST be sufficiently random so as not to be guessable by an attacker. The interaction reference MUST be one- time-use. The AS MUST calculate a hash value based on the client instance and AS nonces and the interaction reference, as described in Section 4.4.3. The client instance will use this value to validate the return call from the AS. The AS then MUST send the hash and interaction reference based on the interaction finalization mode as described in the following sections. 4.4.1. Completing Interaction with a Browser Redirect to the Callback URI When using the "redirect" interaction finish method (Section 3.3.3), the AS signals to the client instance that interaction is complete and the request can be continued by directing the RO (in their browser) back to the client instance's redirect URL sent in the callback request (Section 2.5.6.1). Richer, et al. Expires 26 August 2021 [Page 55] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The AS secures this redirect by adding the hash and interaction reference as query parameters to the client instance's redirect URL. hash REQUIRED. The interaction hash value as described in Section 4.4.3. interact_ref REQUIRED. The interaction reference generated for this interaction. The means of directing the RO to this URL are outside the scope of this specification, but common options include redirecting the RO from a web page and launching the system browser with the target URL. https://client.example.net/return/123455 ?hash=p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A &interact_ref=4IFWWIKYBC2PQ6U56NL1 When receiving the request, the client instance MUST parse the query parameters to calculate and validate the hash value as described in Section 4.4.3. If the hash validates, the client instance sends a continuation request to the AS as described in Section 5.1 using the interaction reference value received here. 4.4.2. Completing Interaction with a Direct HTTP Request Callback When using the "callback" interaction mode (Section 3.3.3) with the "push" method, the AS signals to the client instance that interaction is complete and the request can be continued by sending an HTTP POST request to the client instance's callback URL sent in the callback request (Section 2.5.6.2). The entity message body is a JSON object consisting of the following two fields: hash (string) REQUIRED. The interaction hash value as described in Section 4.4.3. interact_ref (string) REQUIRED. The interaction reference generated for this interaction. POST /push/554321 HTTP/1.1 Host: client.example.net Content-Type: application/json { "hash": "p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A", "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } Richer, et al. Expires 26 August 2021 [Page 56] Internet-Draft Grant Negotiation and Authorization Prot February 2021 When receiving the request, the client instance MUST parse the JSON object and validate the hash value as described in Section 4.4.3. If the hash validates, the client instance sends a continuation request to the AS as described in Section 5.1 using the interaction reference value received here. 4.4.3. Calculating the interaction hash The "hash" parameter in the request to the client instance's callback URL ties the front channel response to an ongoing request by using values known only to the parties involved. This security mechanism allows the client instance to protect itself against several kinds of session fixation and injection attacks. The AS MUST always provide this hash, and the client instance MUST validate the hash when received. To calculate the "hash" value, the party doing the calculation first takes the "nonce" value sent by the client instance in the interaction section of the initial request (Section 2.5.6), the AS's nonce value from the callback response (Section 3.3.3), and the "interact_ref" sent to the client instance's callback URL. These three values are concatenated to each other in this order using a single newline character as a separator between the fields. There is no padding or whitespace before or after any of the lines, and no trailing newline character. VJLO6A4CAYLBXHTR0KRO MBDOFXG4Y5CVJCX821LH 4IFWWIKYBC2PQ6U56NL1 The party then hashes this string with the appropriate algorithm based on the "hash_method" parameter of the "callback". If the "hash_method" value is not present in the client instance's request, the algorithm defaults to "sha3". [[ See issue #56 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/56) ]] 4.4.3.1. SHA3-512 The "sha3" hash method consists of hashing the input string with the 512-bit SHA3 algorithm. The byte array is then encoded using URL Safe Base64 with no padding. The resulting string is the hash value. p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A Richer, et al. Expires 26 August 2021 [Page 57] Internet-Draft Grant Negotiation and Authorization Prot February 2021 4.4.3.2. SHA2-512 The "sha2" hash method consists of hashing the input string with the 512-bit SHA2 algorithm. The byte array is then encoded using URL Safe Base64 with no padding. The resulting string is the hash value. 62SbcD3Xs7L40rjgALA-ymQujoh2LB2hPJyX9vlcr1H6ecChZ8BNKkG_HrOKP_Bpj84rh4mC9aE9x7HPBFcIHw 5. Continuing a Grant Request While it is possible for the AS to return a Section 3 with all the client instance's requested information (including access tokens (Section 3.2) and direct user information (Section 3.4)), it's more common that the AS and the client instance will need to communicate several times over the lifetime of an access grant. This is often part of facilitating interaction (Section 4), but it could also be used to allow the AS and client instance to continue negotiating the parameters of the original grant request (Section 2). To enable this ongoing negotiation, the AS provides a continuation API to the client software. The AS returns a "continue" field in the response (Section 3.1) that contains information the client instance needs to access this API, including a URI to access as well as an access token to use during the continued requests. The access token is initially bound to the same key and method the client instance used to make the initial request. As a consequence, when the client instance makes any calls to the continuation URL, the client instance MUST present the access token as described in Section 7.2 and present proof of the client instance's key (or its most recent rotation) by signing the request as described in Section 7.3. The AS MUST validate all keys presented by the client instance or referenced in an ongoing request for each call within that request. [[ See issue #85 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/85) ]] For example, here the client instance makes a POST request to a unique URI and signs the request with detached JWS: POST /continue/KSKUOMUKM HTTP/1.1 Authorization: GNAP 80UPRY5NM33OMUKMKSKU Host: server.example.com Detached-JWS: ejy0... Richer, et al. Expires 26 August 2021 [Page 58] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The AS MUST be able to tell from the client instance's request which specific ongoing request is being accessed, using a combination of the continuation URL, the provided access token, and the client instance identified by the key signature. If the AS cannot determine a single active grant request to map the continuation request to, the AS MUST return an error. The ability to continue an already-started request allows the client instance to perform several important functions, including presenting additional information from interaction, modifying the initial request, and getting the current state of the request. All requests to the continuation API are protected by this bound access token. For example, here the client instance makes a POST request to a stable continuation endpoint URL with the interaction reference (Section 5.1), includes the access token, and signs with detached JWS: POST /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } If a "wait" parameter was included in the continuation response (Section 3.1), the client instance MUST NOT call the continuation URI prior to waiting the number of seconds indicated. If no "wait" period is indicated, the client instance SHOULD wait at least 5 seconds. If the client instance does not respect the given wait period, the AS MUST return an error. [[ See issue #86 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/86) ]] The response from the AS is a JSON object and MAY contain any of the fields described in Section 3, as described in more detail in the sections below. Richer, et al. Expires 26 August 2021 [Page 59] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the AS determines that the client instance can make a further continuation request, the AS MUST include a new "continue" response (Section 3.1). The new "continue" response MUST include a bound access token as well, and this token SHOULD be a new access token, invalidating the previous access token. If the AS does not return a new "continue" response, the client instance MUST NOT make an additional continuation request. If a client instance does so, the AS MUST return an error. [[ See issue #87 (https://github.com/ietf- wg-gnap/gnap-core-protocol/issues/87) ]] For continuation functions that require the client instance to send a message body, the body MUST be a JSON object. 5.1. Continuing After a Completed Interaction When the AS responds to the client instance's "callback" parameter as in Section 4.4.1, this response includes an interaction reference. The client instance MUST include that value as the field "interact_ref" in a POST request to the continuation URI. POST /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } Since the interaction reference is a one-time-use value as described in Section 4.4.1, if the client instance needs to make additional continuation calls after this request, the client instance MUST NOT include the interaction reference. If the AS detects a client instance submitting the same interaction reference multiple times, the AS MUST return an error and SHOULD invalidate the ongoing request. The Section 3 MAY contain any newly-created access tokens (Section 3.2) or newly-released subject claims (Section 3.4). The response MAY contain a new "continue" response (Section 3.1) as described above. The response SHOULD NOT contain any interaction responses (Section 3.3). [[ See issue #89 (https://github.com/ietf- wg-gnap/gnap-core-protocol/issues/89) ]] For example, if the request is successful in causing the AS to issue access tokens and release subject claims, the response could look like this: Richer, et al. Expires 26 August 2021 [Page 60] Internet-Draft Grant Negotiation and Authorization Prot February 2021 { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L" }, "subject": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com", } ] } } With this example, the client instance can not make an additional continuation request because a "continue" field is not included. [[ See issue #88 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/88) ]] 5.2. Continuing During Pending Interaction When the client instance does not include a "callback" parameter, the client instance will often need to poll the AS until the RO has authorized the request. To do so, the client instance makes a POST request to the continuation URI as in Section 5.1, but does not include a message body. POST /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... The Section 3 MAY contain any newly-created access tokens (Section 3.2) or newly-released subject claims (Section 3.4). The response MAY contain a new "continue" response (Section 3.1) as described above. If a "continue" field is included, it SHOULD include a "wait" field to facilitate a reasonable polling rate by the client instance. The response SHOULD NOT contain interaction responses (Section 3.3). For example, if the request has not yet been authorized by the RO, the AS could respond by telling the client instance to make another continuation request in the future. In this example, a new, unique access token has been issued for the call, which the client instance will use in its next continuation request. Richer, et al. Expires 26 August 2021 [Page 61] Internet-Draft Grant Negotiation and Authorization Prot February 2021 { "continue": { "access_token": { "value": "33OMUKMKSKU80UPRY5NM", "bound": true }, "uri": "https://server.example.com/continue", "wait": 30 } } [[ See issue #90 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/90) ]] [[ See issue #91 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/91) ]] If the request is successful in causing the AS to issue access tokens and release subject claims, the response could look like this example: { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L" }, "subject": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com", } ] } } 5.3. Modifying an Existing Request The client instance might need to modify an ongoing request, whether or not tokens have already been issued or claims have already been released. In such cases, the client instance makes an HTTP PATCH request to the continuation URI and includes any fields it needs to modify. Fields that aren't included in the request are considered unchanged from the original request. The client instance MAY include the "access_token" and "subject" fields as described in Section 2.1 and Section 2.2. Inclusion of these fields override any values in the initial request, which MAY trigger additional requirements and policies by the AS. For example, Richer, et al. Expires 26 August 2021 [Page 62] Internet-Draft Grant Negotiation and Authorization Prot February 2021 if the client instance is asking for more access, the AS could require additional interaction with the RO to gather additional consent. If the client instance is asking for more limited access, the AS could determine that sufficient authorization has been granted to the client instance and return the more limited access rights immediately. [[ See issue #92 (https://github.com/ietf-wg-gnap/gnap- core-protocol/issues/92) ]] The client instance MAY include the "interact" field as described in Section 2.5. Inclusion of this field indicates that the client instance is capable of driving interaction with the RO, and this field replaces any values from a previous request. The AS MAY respond to any of the interaction responses as described in Section 3.3, just like it would to a new request. The client instance MAY include the "user" field as described in Section 2.4 to present new assertions or information about the end- user. [[ See issue #93 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/93) ]] The client instance MUST NOT include the "client" section of the request. [[ See issue #94 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/94) ]] The client instance MAY include post-interaction responses such as described in Section 5.1. [[ See issue #95 (https://github.com/ietf- wg-gnap/gnap-core-protocol/issues/95) ]] Modification requests MUST NOT alter previously-issued access tokens. Instead, any access tokens issued from a continuation are considered new, separate access tokens. The AS MAY revoke existing access tokens after a modification has occurred. [[ See issue #96 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/96) ]] If the modified request can be granted immediately by the AS, the Section 3 MAY contain any newly-created access tokens (Section 3.2) or newly-released subject claims (Section 3.4). The response MAY contain a new "continue" response (Section 3.1) as described above. If interaction can occur, the response SHOULD contain interaction responses (Section 3.3) as well. For example, a client instance initially requests a set of resources using references: Richer, et al. Expires 26 August 2021 [Page 63] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access": [ "read", "write" ], "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } }, "client": "987YHGRT56789IOLK" } Access is granted by the RO, and a token is issued by the AS. In its final response, the AS includes a "continue" field, which includes a separate access token for accessing the continuation API: { "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue", "wait": 30 }, "access_token": { "value": "RP1LT0-OS9M2P_R64TB", "bound": true, "access": [ "read", "write" ] } } This "continue" field allows the client instance to make an eventual continuation call. In the future, the client instance realizes that it no longer needs "write" access and therefore modifies its ongoing request, here asking for just "read" access instead of both "read" and "write" as before. Richer, et al. Expires 26 August 2021 [Page 64] Internet-Draft Grant Negotiation and Authorization Prot February 2021 PATCH /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "access_token": { "access": [ "read" ] } ... } The AS replaces the previous "access" from the first request, allowing the AS to determine if any previously-granted consent already applies. In this case, the AS would likely determine that reducing the breadth of the requested access means that new access tokens can be issued to the client instance. The AS would likely revoke previously-issued access tokens that had the greater access rights associated with them, unless they had been issued with the "durable" flag. { "continue": { "access_token": { "value": "M33OMUK80UPRY5NMKSKU", "bound": true }, "uri": "https://server.example.com/continue", "wait": 30 }, "access_token": { "value": "0EVKC7-2ZKwZM_6N760", "bound": true, "access": [ "read" ] } } For another example, the client instance initially requests read-only access but later needs to step up its access. The initial request could look like this example. Richer, et al. Expires 26 August 2021 [Page 65] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": { "access": [ "read" ] }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } }, "client": "987YHGRT56789IOLK" } Access is granted by the RO, and a token is issued by the AS. In its final response, the AS includes a "continue" field: { "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue", "wait": 30 }, "access_token": { "value": "RP1LT0-OS9M2P_R64TB", "bound": true, "access": [ "read" ] } } This allows the client instance to make an eventual continuation call. The client instance later realizes that it now needs "write" access in addition to the "read" access. Since this is an expansion of what it asked for previously, the client instance also includes a new interaction section in case the AS needs to interact with the RO Richer, et al. Expires 26 August 2021 [Page 66] Internet-Draft Grant Negotiation and Authorization Prot February 2021 again to gather additional authorization. Note that the client instance's nonce and callback are different from the initial request. Since the original callback was already used in the initial exchange, and the callback is intended for one-time-use, a new one needs to be included in order to use the callback again. [[ See issue #97 (https://github.com/ietf-wg-gnap/gnap-core-protocol/ issues/97) ]] PATCH /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "access_token": { "access": [ "read", "write" ] }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return/654321", "nonce": "K82FX4T4LKLTI25DQFZC" } } } From here, the AS can determine that the client instance is asking for more than it was previously granted, but since the client instance has also provided a mechanism to interact with the RO, the AS can use that to gather the additional consent. The protocol continues as it would with a new request. Since the old access tokens are good for a subset of the rights requested here, the AS might decide to not revoke them. However, any access tokens granted after this update process are new access tokens and do not modify the rights of existing access tokens. 5.4. Canceling a Grant Request If the client instance wishes to cancel an ongoing grant request, it makes an HTTP DELETE request to the continuation URI. Richer, et al. Expires 26 August 2021 [Page 67] Internet-Draft Grant Negotiation and Authorization Prot February 2021 DELETE /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... If the request is successfully cancelled, the AS responds with an HTTP 202. The AS SHOULD revoke all associated access tokens. 6. Token Management If an access token response includes the "manage" parameter as described in Section 3.2.1, the client instance MAY call this URL to manage the access token with any of the actions defined in the following sections. Other actions are undefined by this specification. The access token being managed acts as the access element for its own management API. The client instance MUST present proof of an appropriate key along with the access token. If the token is sender-constrained (i.e., not a bearer token), it MUST be sent with the appropriate binding for the access token (Section 7.2). If the token is a bearer token, the client instance MUST present proof of the same key identified in the initial request (Section 2.3) as described in Section 7.3. The AS MUST validate the proof and assure that it is associated with either the token itself or the client instance the token was issued to, as appropriate for the token's presentation type. 6.1. Rotating the Access Token The client instance makes an HTTP POST to the token management URI, sending the access token in the appropriate header and signing the request with the appropriate key. POST /token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L HTTP/1.1 Host: server.example.com Authorization: GNAP OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 Detached-JWS: eyj0.... The AS validates that the token presented is associated with the management URL, that the AS issued the token to the given client instance, and that the presented key is appropriate to the token. Richer, et al. Expires 26 August 2021 [Page 68] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the access token has expired, the AS SHOULD honor the rotation request to the token management URL since it is likely that the client instance is attempting to refresh the expired token. To support this, the AS MAY apply different lifetimes for the use of the token in management vs. its use at an RS. An AS MUST NOT honor a rotation request for an access token that has been revoked, either by the AS or by the client instance through the token management URI (Section 6.2). If the token is validated and the key is appropriate for the request, the AS MUST invalidate the current access token associated with this URL, if possible, and return a new access token response as described in Section 3.2.1, unless the "multi_token" flag is specified in the request. The value of the access token MUST NOT be the same as the current value of the access token used to access the management API. The response MAY include an updated access token management URL as well, and if so, the client instance MUST use this new URL to manage the new access token. [[ See issue #101 (https://github.com/ietf-wg- gnap/gnap-core-protocol/issues/101) ]] [[ See issue #102 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/102) ]] Richer, et al. Expires 26 August 2021 [Page 69] Internet-Draft Grant Negotiation and Authorization Prot February 2021 { "access_token": { "value": "FP6A8H6HY37MH13CK76LBZ6Y1UADG6VEUPEER5H2", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata" ] } } [[ See issue #103 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/103) ]] 6.2. Revoking the Access Token If the client instance wishes to revoke the access token proactively, such as when a user indicates to the client instance that they no longer wish for it to have access or the client instance application detects that it is being uninstalled, the client instance can use the token management URI to indicate to the AS that the AS should invalidate the access token for all purposes. The client instance makes an HTTP DELETE request to the token management URI, presenting the access token and signing the request with the appropriate key. DELETE /token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L HTTP/1.1 Host: server.example.com Authorization: GNAP OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 Detached-JWS: eyj0.... Richer, et al. Expires 26 August 2021 [Page 70] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the key presented is associated with the token (or the client instance, in the case of a bearer token), the AS MUST invalidate the access token, if possible, and return an HTTP 204 response code. 204 No Content Though the AS MAY revoke an access token at any time for any reason, the token management function is specifically for the client instance's use. If the access token has already expired or has been revoked through other means, the AS SHOULD honor the revocation request to the token management URL as valid, since the end result is still the token not being usable. 7. Securing Requests from the Client Instance In GNAP, the client instance secures its requests to the AS and RS by presenting an access token, presenting proof of a key that it possesses, or both an access token and key proof together. * When an access token is used with a key proof, this is a bound token request. This type of request is used for calls to the RS as well as the AS during negotiation. * When a key proof is used with no access token, this is a non- authorized signed request. This type of request is used for calls to the AS to initiate a negotiation. * When an access token is used with no key proof, this is a bearer token request. This type of request is used only for calls to the RS, and only with access tokens that are not bound to any key as described in Section 3.2.1. * When neither an access token nor key proof are used, this is an unsecured request. This type of used only for calls to the RS during a discovery phase as described in Section 10.4. 7.1. Key Formats Several different places in GNAP require the presentation of key material by value. Proof of this key material MUST be bound to a request, the nature of which varies with the location in the protocol the key is used. For a key used as part of a client instance's initial request in Section 2.3, the key value is the client instance's public key, and proof of that key MUST be presented in that request. For a key used as part of an access token response in Section 3.2.1, the proof of that key MUST be used when presenting the access token. Richer, et al. Expires 26 August 2021 [Page 71] Internet-Draft Grant Negotiation and Authorization Prot February 2021 A key presented by value MUST be a public key in at least one supported format. If a key is sent in multiple formats, all the key format values MUST be equivalent. Note that while most formats present the full value of the public key, some formats present a value cryptographically derived from the public key. proof (string) The form of proof that the client instance will use when presenting the key. The valid values of this field and the processing requirements for each are detailed in Section 7.3. The "proof" field is REQUIRED. jwk (object) Value of the public key as a JSON Web Key [RFC7517]. The object MUST contain an "alg" field which is used to validate the signature. The object MUST contain the "kid" field to identify the key. cert (string) PEM serialized value of the certificate used to sign the request, with optional internal whitespace per [RFC7468]. The PEM header and footer are optionally removed. cert#S256 (string) The certificate thumbprint calculated as per OAuth-MTLS [RFC8705] in base64 URL encoding. Note that this format does not include the full public key. Additional key formats are defined in a registry TBD (Section 12). This non-normative example shows a single key presented in multiple formats. This key is intended to be used with the detached JWS (Section 7.3.1) proofing mechanism, as indicated by the "proof" field. "key": { "proof": "jwsd", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..." }, "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFA..." } 7.1.1. Key References Keys in GNAP can also be passed by reference such that the party receiving the reference will be able to determine the appropriate keying material for use in that part of the protocol. Richer, et al. Expires 26 August 2021 [Page 72] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "key": "S-P4XJQ_RYJCRTSU1.63N3E" Keys referenced in this manner MAY be shared symmetric keys. The key reference MUST NOT contain any unencrypted private or shared symmetric key information. Keys referenced in this manner MUST be bound to a single proofing mechanism. The means of dereferencing this value are out of scope for this specification. 7.2. Presenting Access Tokens The method the client instance uses to send an access token depends on whether the token is bound to a key, and if so which proofing method is associated with the key. This information is conveyed in the "key" and "proof" parameters in the access token response (Section 3.2.1). If the "key" value is the boolean "false", the access token is a bearer token sent using the HTTP Header method defined in [RFC6750]. Authorization: Bearer OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 The form parameter and query parameter methods of [RFC6750] MUST NOT be used. If the "key" value is the boolean "true", the access token MUST be sent using the same key and proofing mechanism that the client instance used in its initial request (or its most recent rotation). If the "key" value is an object as described in Section 7.1, the value of the "proof" field within the key indicates the particular proofing mechanism to use. The access token is sent using the HTTP authorization scheme "GNAP" along with a key proof as described in Section 7.3 for the key bound to the access token. For example, a "jwsd"-bound access token is sent as follows: Authorization: GNAP OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 Detached-JWS: eyj0.... [[ See issue #104 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/104) ]] Richer, et al. Expires 26 August 2021 [Page 73] Internet-Draft Grant Negotiation and Authorization Prot February 2021 7.3. Proving Possession of a Key with a Request Any keys presented by the client instance to the AS or RS MUST be validated as part of the request in which they are presented. The type of binding used is indicated by the proof parameter of the key object in Section 7.1. Values defined by this specification are as follows: jwsd A detached JWS signature header jws Attached JWS payload mtls Mutual TLS certificate verification dpop OAuth Demonstration of Proof-of-Possession key proof header httpsig HTTP Signing signature header oauthpop OAuth PoP key proof authentication header Additional proofing methods are defined by a registry TBD (Section 12). All key binding methods used by this specification MUST cover all relevant portions of the request, including anything that would change the nature of the request, to allow for secure validation of the request by the AS. Relevant aspects include the URI being called, the HTTP method being used, any relevant HTTP headers and values, and the HTTP message body itself. The recipient of the signed message MUST validate all components of the signed message to ensure that nothing has been tampered with or substituted in a way that would change the nature of the request. When a key proofing mechanism is bound to an access token, the access token MUST be covered by the signature method of the proofing mechanism. When used for delegation in GNAP, these key binding mechanisms allow the AS to ensure that the keys presented by the client instance in the initial request are in control of the party calling any follow-up or continuation requests. To facilitate this requirement, the continuation response (Section 3.1) includes an access token bound to the client instance's key (Section 2.3), and that key (or its most recent rotation) MUST be proved in all continuation requests Section 5. Token management requests Section 6 are similarly bound to either the access token's own key or, in the case of bearer tokens, the client instance's key. Richer, et al. Expires 26 August 2021 [Page 74] Internet-Draft Grant Negotiation and Authorization Prot February 2021 [[ See issue #105 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/105) ]] 7.3.1. Detached JWS This method is indicated by "jwsd" in the "proof" field. A JWS [RFC7515] signature object is created as follows: The header of the JWS MUST contain the "kid" field of the key bound to this client instance for this request. The JWS header MUST contain an "alg" field appropriate for the key identified by kid and MUST NOT be "none". The "b64" field MUST be set to "false" and the "crit" field MUST contain at least "b64" as specified in [RFC7797] To protect the request, the JWS header MUST contain the following additional fields. htm (string) The HTTP Method used to make this request, as an uppercase ASCII string. htu (string) The HTTP URI used for this request, including all path and query components. ts (integer) A timestamp of the request in integer seconds at_hash (string) When to bind a request to an access token, the access token hash value. Its value is the base64url encoding of the left-most half of the hash of the octets of the ASCII representation of the "access_token" value, where the hash algorithm used is the hash algorithm used in the "alg" header parameter of the JWS's JOSE Header. For instance, if the "alg" is "RS256", hash the "access_token" value with SHA-256, then take the left-most 128 bits and base64url encode them. The payload of the JWS object is the serialized body of the request, and the object is signed according to detached JWS [RFC7797]. The client instance presents the signature in the Detached-JWS HTTP Header field. Richer, et al. Expires 26 August 2021 [Page 75] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: eyJiNjQiOmZhbHNlLCJhbGciOiJSUzI1NiIsImtpZCI6Inh5ei0xIn0. .Y287HMtaY0EegEjoTd_04a4GC6qV48GgVbGKOhHdJnDtD0VuUlVjLfwne8AuUY3U7e8 9zUWwXLnAYK_BiS84M8EsrFvmv8yDLWzqveeIpcN5_ysveQnYt9Dqi32w6IOtAywkNUD ZeJEdc3z5s9Ei8qrYFN2fxcu28YS4e8e_cHTK57003WJu-wFn2TJUmAbHuqvUsyTb-nz YOKxuCKlqQItJF7E-cwSb_xULu-3f77BEU_vGbNYo5ZBa2B7UHO-kWNMSgbW2yeNNLbL C18Kv80GF22Y7SbZt0e2TwnR2Aa2zksuUbntQ5c7a1-gxtnXzuIKa34OekrnyqE1hmVW peQ { "access_token": { "access": [ "dolphin-metadata" ] }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "proof": "jwsd", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8 xYJCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD-y6jnD1u9YhBOCWObNPF vpkTM8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5-ejCywKRBfctRcnhTTGNztbbDBUyD SWmFMVCHe5mXT4cL0BwrZC6S-uu-LAx06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS 63WYPHi_Ap2B7_8Wbw4ttzbMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFe kpdfWdiPQddQ6Y1cK2U3obvUg7w" } } "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, } } Richer, et al. Expires 26 August 2021 [Page 76] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the request being made does not have a message body, such as an HTTP GET, OPTIONS, or DELETE method, the JWS signature is calculated over an empty payload. When the server (AS or RS) receives the Detached-JWS header, it MUST parse its contents as a detached JWS object. The HTTP Body is used as the payload for purposes of validating the JWS, with no transformations. 7.3.2. Attached JWS This method is indicated by "jws" in the "proof" field. A JWS [RFC7515] signature object is created as follows: The header of the JWS MUST contain the "kid" field of the key bound to this client instance for this request. The JWS header MUST contain an "alg" field appropriate for the key identified by "kid" and MUST NOT be "none". To protect the request, the JWS header MUST contain the following additional fields. htm (string) The HTTP Method used to make this request, as an uppercase ASCII string. htu (string) The HTTP URI used for this request, including all path and query components. ts (integer) A timestamp of the request in integer seconds at_hash (string) When to bind a request to an access token, the access token hash value. Its value is the base64url encoding of the left-most half of the hash of the octets of the ASCII representation of the "access_token" value, where the hash algorithm used is the hash algorithm used in the "alg" header parameter of the JWS's JOSE Header. For instance, if the "alg" is "RS256", hash the "access_token" value with SHA-256, then take the left-most 128 bits and base64url encode them. The payload of the JWS object is the JSON serialized body of the request, and the object is signed according to JWS and serialized into compact form [RFC7515]. The client instance presents the JWS as the body of the request along with a content type of "application/jose". The AS MUST extract the payload of the JWS and treat it as the request body for further processing. Richer, et al. Expires 26 August 2021 [Page 77] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/jose eyJhbGciOiJSUzI1NiIsImtpZCI6IktBZ05wV2JSeXk5T WYycmlrbDQ5OExUaE1ydmtiWldIVlNRT0JDNFZIVTQiLC JodG0iOiJwb3N0IiwiaHR1IjoiL3R4IiwidHMiOjE2MDM 4MDA3ODN9.eyJjYXBhYmlsaXRpZXMiOltdLCJjbGllbnQ iOnsia2V5Ijp7Imp3ayI6eyJrdHkiOiJSU0EiLCJlIjoi QVFBQiIsImtpZCI6IktBZ05wV2JSeXk5TWYycmlrbDQ5O ExUaE1ydmtiWldIVlNRT0JDNFZIVTQiLCJuIjoibGxXbU hGOFhBMktOTGRteE9QM2t4RDlPWTc2cDBTcjM3amZoejk 0YTkzeG0yRk5xb1NQY1JaQVBkMGxxRFM4TjNVaWE1M2RC MjNaNTlPd1k0YnBNX1ZmOEdKdnZwdExXbnhvMVB5aG1Qc i1lY2RTQ1JRZFRjX1pjTUY0aFJWNDhxcWx2dUQwbXF0Y0 RiSWtTQkR2Y2NKbVpId2ZUcERIaW5UOHR0dmNWUDhWa0F NQXE0a1ZhenhPcE1vSVJzb3lFcF9lQ2U1cFN3cUhvMGRh Q1dOS1ItRXBLbTZOaU90ZWRGNE91bXQ4TkxLVFZqZllnR khlQkRkQ2JyckVUZDR2Qk13RHRBbmpQcjNDVkN3d3gyYk FRVDZTbHhGSjNmajJoaHlJcHE3cGM4clppYjVqTnlYS3d mQnVrVFZZWm96a3NodC1Mb2h5QVNhS3BZVHA4THROWi13 In0sInByb29mIjoiandzIn0sIm5hbWUiOiJNeUZpcnN0Q 2xpZW50IiwidXJpIjoiaHR0cDovL2xvY2FsaG9zdC9jbG llbnQvY2xpZW50SUQifSwiaW50ZXJhY3QiOnsic3RhcnQ iOlsicmVkaXJlY3QiXSwiZmluaXNoIjp7Im1ldGhvZCI6 InJlZGlyZWN0Iiwibm9uY2UiOiJkOTAyMTM4ODRiODQwO TIwNTM4YjVjNTEiLCJ1cmkiOiJodHRwOi8vbG9jYWxob3 N0L2NsaWVudC9yZXF1ZXN0LWRvbmUifX0sImFjY2Vzc19 0b2tlbiI6eyJhY2Nlc3MiOlt7ImFjdGlvbnMiOlsicmVh ZCIsInByaW50Il0sImxvY2F0aW9ucyI6WyJodHRwOi8vb G9jYWxob3N0L3Bob3RvcyJdLCJ0eXBlIjoicGhvdG8tYX BpIn1dfSwic3ViamVjdCI6eyJzdWJfaWRzIjpbImlzc19 zdWIiLCJlbWFpbCJdfX0.LUyZ8_fERmxbYARq8kBYMwzc d8GnCAKAlo2ZSYLRRNAYWPrp2XGLJOvg97WK1idf_LB08 OJmLVsCXxCvn9mgaAkYNL_ZjHcusBvY1mNo0E1sdTEr31 CVKfC-6WrZCscb8YqE4Ayhh0Te8kzSng3OkLdy7xN4xeK uHzpF7yGsM52JZ0cBcTo6WrYEfGdr08AWQJ59ht72n3jT smYNy9A6I4Wrvfgj3TNxmwYojpBAicfjnzA1UVcNm9F_x iSz1_y2tdH7j5rVqBMQife-k9Ewk95vr3lurthenliYSN iUinVfoW1ybnaIBcTtP1_YCxg_h1y-B5uZEvYNGCuoCqa 6IQ This example's JWS header decodes to: Richer, et al. Expires 26 August 2021 [Page 78] Internet-Draft Grant Negotiation and Authorization Prot February 2021 { "alg": "RS256", "kid": "KAgNpWbRyy9Mf2rikl498LThMrvkbZWHVSQOBC4VHU4", "htm": "POST", "htu": "https://server.example.com/tx", "ts": 1603800783 } And the JWS body decodes to: { "capabilities": [], "client": { "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "KAgNpWbRyy9Mf2rikl498LThMrvkbZWHVSQOBC4VHU4", "n": "llWmHF8XA2KNLdmxOP3kxD9OY76p0Sr37jfhz94a93xm2FNqoSPc RZAPd0lqDS8N3Uia53dB23Z59OwY4bpM_Vf8GJvvptLWnxo1PyhmPr-ecd SCRQdTc_ZcMF4hRV48qqlvuD0mqtcDbIkSBDvccJmZHwfTpDHinT8ttvcV P8VkAMAq4kVazxOpMoIRsoyEp_eCe5pSwqHo0daCWNKR-EpKm6NiOtedF4 Oumt8NLKTVjfYgFHeBDdCbrrETd4vBMwDtAnjPr3CVCwwx2bAQT6SlxFJ3 fj2hhyIpq7pc8rZib5jNyXKwfBukTVYZozksht-LohyASaKpYTp8LtNZ-w" }, "proof": "jws" }, "name": "My First Client", "uri": "http://localhost/client/clientID" }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "nonce": "d90213884b840920538b5c51", "uri": "http://localhost/client/request-done" } }, "access_token": { "access": [ { "actions": [ "read", "print" ], "locations": [ "http://localhost/photos" ], Richer, et al. Expires 26 August 2021 [Page 79] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "type": "photo-api" } ] } "subject": { "sub_ids": [ "iss_sub", "email" ] } } If the request being made does not have a message body, such as an HTTP GET, OPTIONS, or DELETE method, the JWS signature is calculated over an empty payload and passed in the "Detached-JWS" header as described in Section 7.3.1. [[ See issue #109 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/109) ]] 7.3.3. Mutual TLS This method is indicated by "mtls" in the "proof" field. The client instance presents its TLS client certificate during TLS negotiation with the server (either AS or RS). The AS or RS takes the thumbprint of the TLS client certificate presented during mutual TLS negotiation and compares that thumbprint to the thumbprint presented by the client instance application as described in [RFC8705] section 3. POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json SSL_CLIENT_CERT: MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFADCBmjE3MDUGA1UEAwwuQmVz cG9rZSBFbmdpbmVlcmluZyBSb290IENlcnRpZmljYXRlIEF1dGhvcml0eTELMAkG A1UECAwCTUExCzAJBgNVBAYTAlVTMRkwFwYJKoZIhvcNAQkBFgpjYUBic3BrLmlv MRwwGgYDVQQKDBNCZXNwb2tlIEVuZ2luZWVyaW5nMQwwCgYDVQQLDANNVEkwHhcN MTkwNDEwMjE0MDI5WhcNMjQwNDA4MjE0MDI5WjB8MRIwEAYDVQQDDAlsb2NhbGhv c3QxCzAJBgNVBAgMAk1BMQswCQYDVQQGEwJVUzEgMB4GCSqGSIb3DQEJARYRdGxz Y2xpZW50QGJzcGsuaW8xHDAaBgNVBAoME0Jlc3Bva2UgRW5naW5lZXJpbmcxDDAK BgNVBAsMA01USTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMmaXQHb s/wc1RpsQ6Orzf6rN+q2ijaZbQxD8oi+XaaN0P/gnE13JqQduvdq77OmJ4bQLokq sd0BexnI07Njsl8nkDDYpe8rNve5TjyUDCfbwgS7U1CluYenXmNQbaYNDOmCdHww UjV4kKREg6DGAx22Oq7+VHPTeeFgyw4kQgWRSfDENWY3KUXJlb/vKR6lQ+aOJytk vj8kVZQtWupPbvwoJe0na/ISNAOhL74w20DWWoDKoNltXsEtflNljVoi5nqsmZQc jfjt6LO0T7O1OX3Cwu2xWx8KZ3n/2ocuRqKEJHqUGfeDtuQNt6Jz79v/OTr8puLW aD+uyk6NbtGjoQsCAwEAAaOBiTCBhjAJBgNVHRMEAjAAMAsGA1UdDwQEAwIF4DBs BgNVHREEZTBjgglsb2NhbGhvc3SCD3Rsc2NsaWVudC5sb2NhbIcEwKgBBIERdGxz Y2xpZW50QGJzcGsuaW+GF2h0dHA6Ly90bHNjbGllbnQubG9jYWwvhhNzc2g6dGxz Richer, et al. Expires 26 August 2021 [Page 80] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Y2xpZW50LmxvY2FsMA0GCSqGSIb3DQEBCwUAA4IBAQCKKv8WlLrT4Z5NazaUrYtl TF+2v0tvZBQ7qzJQjlOqAcvxry/d2zyhiRCRS/v318YCJBEv4Iq2W3I3JMMyAYEe 2573HzT7rH3xQP12yZyRQnetdiVM1Z1KaXwfrPDLs72hUeELtxIcfZ0M085jLboX hufHI6kqm3NCyCCTihe2ck5RmCc5l2KBO/vAHF0ihhFOOOby1v6qbPHQcxAU6rEb 907/p6BW/LV1NCgYB1QtFSfGxowqb9FRIMD2kvMSmO0EMxgwZ6k6spa+jk0IsI3k lwLW9b+Tfn/daUbIDctxeJneq2anQyU2znBgQl6KILDSF4eaOqlBut/KNZHHazJh { "access_token": { "access": [ "dolphin-metadata" ] }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "key": { "proof": "mtls", "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFADCBmjE3 MDUGA1UEAwwuQmVzcG9rZSBFbmdpbmVlcmluZyBSb290IENlcnRpZmljYXRlIEF1d Ghvcml0eTELMAkGA1UECAwCTUExCzAJBgNVBAYTAlVTMRkwFwYJKoZIhvcNAQkBFg pjYUBic3BrLmlvMRwwGgYDVQQKDBNCZXNwb2tlIEVuZ2luZWVyaW5nMQwwCgYDVQQ LDANNVEkwHhcNMTkwNDEwMjE0MDI5WhcNMjQwNDA4MjE0MDI5WjB8MRIwEAYDVQQD DAlsb2NhbGhvc3QxCzAJBgNVBAgMAk1BMQswCQYDVQQGEwJVUzEgMB4GCSqGSIb3D QEJARYRdGxzY2xpZW50QGJzcGsuaW8xHDAaBgNVBAoME0Jlc3Bva2UgRW5naW5lZX JpbmcxDDAKBgNVBAsMA01USTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggE BAMmaXQHbs/wc1RpsQ6Orzf6rN+q2ijaZbQxD8oi+XaaN0P/gnE13JqQduvdq77Om J4bQLokqsd0BexnI07Njsl8nkDDYpe8rNve5TjyUDCfbwgS7U1CluYenXmNQbaYND OmCdHwwUjV4kKREg6DGAx22Oq7+VHPTeeFgyw4kQgWRSfDENWY3KUXJlb/vKR6lQ+ aOJytkvj8kVZQtWupPbvwoJe0na/ISNAOhL74w20DWWoDKoNltXsEtflNljVoi5nq smZQcjfjt6LO0T7O1OX3Cwu2xWx8KZ3n/2ocuRqKEJHqUGfeDtuQNt6Jz79v/OTr8 puLWaD+uyk6NbtGjoQsCAwEAAaOBiTCBhjAJBgNVHRMEAjAAMAsGA1UdDwQEAwIF4 DBsBgNVHREEZTBjgglsb2NhbGhvc3SCD3Rsc2NsaWVudC5sb2NhbIcEwKgBBIERdG xzY2xpZW50QGJzcGsuaW+GF2h0dHA6Ly90bHNjbGllbnQubG9jYWwvhhNzc2g6dGx zY2xpZW50LmxvY2FsMA0GCSqGSIb3DQEBCwUAA4IBAQCKKv8WlLrT4Z5NazaUrYtl TF+2v0tvZBQ7qzJQjlOqAcvxry/d2zyhiRCRS/v318YCJBEv4Iq2W3I3JMMyAYEe2 573HzT7rH3xQP12yZyRQnetdiVM1Z1KaXwfrPDLs72hUeELtxIcfZ0M085jLboXhu fHI6kqm3NCyCCTihe2ck5RmCc5l2KBO/vAHF0ihhFOOOby1v6qbPHQcxAU6rEb907 Richer, et al. Expires 26 August 2021 [Page 81] Internet-Draft Grant Negotiation and Authorization Prot February 2021 /p6BW/LV1NCgYB1QtFSfGxowqb9FRIMD2kvMSmO0EMxgwZ6k6spa+jk0IsI3klwLW 9b+Tfn/daUbIDctxeJneq2anQyU2znBgQl6KILDSF4eaOqlBut/KNZHHazJh" } } [[ See issue #110 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/110) ]] 7.3.4. Demonstration of Proof-of-Possession (DPoP) This method is indicated by "dpop" in the "proof" field. The client instance creates a Demonstration of Proof-of-Possession signature header as described in [I-D.ietf-oauth-dpop] section 2. In addition to the required fields, the DPoP body MUST also contain a digest of the request body: digest (string) Digest of the request body as the value of the Digest header defined in [RFC3230]. POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json DPoP: eyJ0eXAiOiJkcG9wK2p3dCIsImFsZyI6IlJTMjU2IiwiandrIjp7Imt0eSI6Il JTQSIsImUiOiJBUUFCIiwia2lkIjoieHl6LWNsaWVudCIsImFsZyI6IlJTMjU2Iiwibi I6Inp3Q1RfM2J4LWdsYmJIcmhlWXBZcFJXaVk5SS1uRWFNUnBablJySWpDczZiX2VteV RrQmtEREVqU3lzaTM4T0M3M2hqMS1XZ3hjUGRLTkdaeUlvSDNRWmVuMU1LeXloUXBMSk cxLW9MTkxxbTdwWFh0ZFl6U2RDOU8zLW9peXk4eWtPNFlVeU5aclJSZlBjaWhkUUNiT1 9PQzhRdWdtZzlyZ05ET1NxcHBkYU5lYXMxb3Y5UHhZdnhxcnoxLThIYTdna0QwMFlFQ1 hIYUIwNXVNYVVhZEhxLU9fV0l2WVhpY2c2STVqNlM0NFZOVTY1VkJ3dS1BbHluVHhRZE 1BV1AzYll4VlZ5NnAzLTdlVEpva3ZqWVRGcWdEVkRaOGxVWGJyNXlDVG5SaG5oSmd2Zj NWakRfbWFsTmU4LXRPcUs1T1NEbEhUeTZnRDlOcWRHQ20tUG0zUSJ9fQ.eyJodHRwX21 ldGhvZCI6IlBPU1QiLCJodHRwX3VyaSI6Imh0dHA6XC9cL2hvc3QuZG9ja2VyLmludGV ybmFsOjk4MzRcL2FwaVwvYXNcL3RyYW5zYWN0aW9uIiwiaWF0IjoxNTcyNjQyNjEzLCJ qdGkiOiJIam9IcmpnbTJ5QjR4N2pBNXl5RyJ9.aUhftvfw2NoW3M7durkopReTvONng1 fOzbWjAlKNSLL0qIwDgfG39XUyNvwQ23OBIwe6IuvTQ2UBBPklPAfJhDTKd8KHEAfidN B-LzUOzhDetLg30yLFzIpcEBMLCjb0TEsmXadvxuNkEzFRL-Q-QCg0AXSF1h57eAqZV8 SYF4CQK9OUV6fIWwxLDd3cVTx83MgyCNnvFlG_HDyim1Xx-rxV4ePd1vgDeRubFb6QWj iKEO7vj1APv32dsux67gZYiUpjm0wEZprjlG0a07R984KLeK1XPjXgViEwEdlirUmpVy T9tyEYqGrTfm5uautELgMls9sgSyE929woZ59elg { "access_token": { "access": [ "dolphin-metadata" ] }, "interact": { "start": ["redirect"], Richer, et al. Expires 26 August 2021 [Page 82] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "finish": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "proof": "dpop", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xYJ CCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD-y6jnD1u9YhBOCWObNPFvpkTM 8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5-ejCywKRBfctRcnhTTGNztbbDBUyDSWmFMVCH e5mXT4cL0BwrZC6S-uu-LAx06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS63WYPHi_Ap2 B7_8Wbw4ttzbMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFekpdfWdiPQddQ6Y 1cK2U3obvUg7w" } } } } 7.3.5. HTTP Message Signing This method is indicated by "httpsig" in the "proof" field. The client instance creates an HTTP Signature header as described in [I-D.ietf-httpbis-message-signatures] section 4. The client instance MUST calculate and present the Digest header as defined in [RFC3230] and include this header in the signature. POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Content-Length: 716 Signature: keyId="xyz-client", algorithm="rsa-sha256", headers="(request-target) digest content-length", signature="TkehmgK7GD/z4jGkmcHS67cjVRgm3zVQNlNrrXW32Wv7d u0VNEIVI/dMhe0WlHC93NP3ms91i2WOW5r5B6qow6TNx/82/6W84p5jqF YuYfTkKYZ69GbfqXkYV9gaT++dl5kvZQjVk+KZT1dzpAzv8hdk9nO87Xi rj7qe2mdAGE1LLc3YvXwNxuCQh82sa5rXHqtNT1077fiDvSVYeced0UEm rWwErVgr7sijtbTohC4FJLuJ0nG/KJUcIG/FTchW9rd6dHoBnY43+3Dzj Richer, et al. Expires 26 August 2021 [Page 83] Internet-Draft Grant Negotiation and Authorization Prot February 2021 CIthXpdH5u4VX3TBe6GJDO6Mkzc6vB+67OWzPwhYTplUiFFV6UZCsDEeu Sa/Ue1yLEAMg=="]} Digest: SHA=oZz2O3kg5SEFAhmr0xEBbc4jEfo= { "access_token": { "access": [ "dolphin-metadata" ] }, "interact": { "start": ["redirect"], "finish": { "method": "push", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "proof": "httpsig", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_J tffXyaSx8xYJCCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD- y6jnD1u9YhBOCWObNPFvpkTM8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5- ejCywKRBfctRcnhTTGNztbbDBUyDSWmFMVCHe5mXT4cL0BwrZC6S-uu-LAx 06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS63WYPHi_Ap2B7_8Wbw4ttz bMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFekpdfWdiPQddQ6 Y1cK2U3obvUg7w" } } } } When used to present an access token as in Section 7.2, the Authorization header MUST be included in the signature. Richer, et al. Expires 26 August 2021 [Page 84] Internet-Draft Grant Negotiation and Authorization Prot February 2021 7.3.6. OAuth Proof of Possession (PoP) This method is indicated by "oauthpop" in the "proof" field. The client instance creates an HTTP Authorization PoP header as described in [I-D.ietf-oauth-signed-http-request] section 4, with the following additional requirements: * The "at" (access token) field MUST be omitted unless this method is being used in conjunction with an access token as in Section 7.2. [[ See issue #112 (https://github.com/ietf-wg-gnap/ gnap-core-protocol/issues/112) ]] * The "b" (body hash) field MUST be calculated and supplied, unless there is no entity body (such as a GET, OPTIONS, or DELETE request). * All components of the URL MUST be calculated and supplied * The m (method) field MUST be supplied POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json PoP: eyJhbGciOiJSUzI1NiIsImp3ayI6eyJrdHkiOiJSU0EiLCJlIjoi QVFBQiIsImtpZCI6Inh5ei1jbGllbnQiLCJhbGciOiJSUzI1NiIsIm4iO iJ6d0NUXzNieC1nbGJiSHJoZVlwWXBSV2lZOUktbkVhTVJwWm5ScklqQ3 M2Yl9lbXlUa0JrRERFalN5c2kzOE9DNzNoajEtV2d4Y1BkS05HWnlJb0g zUVplbjFNS3l5aFFwTEpHMS1vTE5McW03cFhYdGRZelNkQzlPMy1vaXl5 OHlrTzRZVXlOWnJSUmZQY2loZFFDYk9fT0M4UXVnbWc5cmdORE9TcXBwZ GFOZWFzMW92OVB4WXZ4cXJ6MS04SGE3Z2tEMDBZRUNYSGFCMDV1TWFVYW RIcS1PX1dJdllYaWNnNkk1ajZTNDRWTlU2NVZCd3UtQWx5blR4UWRNQVd QM2JZeFZWeTZwMy03ZVRKb2t2allURnFnRFZEWjhsVVhicjV5Q1RuUmhu aEpndmYzVmpEX21hbE5lOC10T3FLNU9TRGxIVHk2Z0Q5TnFkR0NtLVBtM 1EifX0.eyJwIjoiXC9hcGlcL2FzXC90cmFuc2FjdGlvbiIsImIiOiJxa0 lPYkdOeERhZVBTZnc3NnFjamtqSXNFRmxDb3g5bTU5NFM0M0RkU0xBIiw idSI6Imhvc3QuZG9ja2VyLmludGVybmFsIiwiaCI6W1siQWNjZXB0Iiwi Q29udGVudC1UeXBlIiwiQ29udGVudC1MZW5ndGgiXSwiVjQ2OUhFWGx6S k9kQTZmQU5oMmpKdFhTd3pjSGRqMUloOGk5M0h3bEVHYyJdLCJtIjoiUE 9TVCIsInRzIjoxNTcyNjQyNjEwfQ.xyQ47qy8bu4fyK1T3Ru1Sway8wp6 5rfAKnTQQU92AUUU07I2iKoBL2tipBcNCC5zLH5j_WUyjlN15oi_lLHym fPdzihtt8_Jibjfjib5J15UlifakjQ0rHX04tPal9PvcjwnyZHFcKn-So Y3wsARn-gGwxpzbsPhiKQP70d2eG0CYQMA6rTLslT7GgdQheelhVFW29i 27NcvqtkJmiAG6Swrq4uUgCY3zRotROkJ13qo86t2DXklV-eES4-2dCxf cWFkzBAr6oC4Qp7HnY_5UT6IWkRJt3efwYprWcYouOVjtRan3kEtWkaWr G0J4bPVnTI5St9hJYvvh7FE8JirIg { "access_token": { Richer, et al. Expires 26 August 2021 [Page 85] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access": [ "dolphin-metadata" ] }, "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "proof": "oauthpop", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_J tffXyaSx8xYJCCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD- y6jnD1u9YhBOCWObNPFvpkTM8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5- ejCywKRBfctRcnhTTGNztbbDBUyDSWmFMVCHe5mXT4cL0BwrZC6S-uu-LAx 06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS63WYPHi_Ap2B7_8Wbw4ttz bMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFekpdfWdiPQddQ6 Y1cK2U3obvUg7w" } } } } [[ See issue #113 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/113) ]] 8. Resource Access Rights GNAP provides a rich structure for describing the protected resources hosted by RSs and accessed by client software. This structure is used when the client instance requests an access token (Section 2.1) and when an access token is returned (Section 3.2). Richer, et al. Expires 26 August 2021 [Page 86] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The root of this structure is a JSON array. The elements of the JSON array represent rights of access that are associated with the the access token. The resulting access is the union of all elements within the array. The access associated with the access token is described using objects that each contain multiple dimensions of access. Each object contains a REQUIRED "type" property that determines the type of API that the token is used for. type (string) The type of resource request as a string. This field MAY define which other fields are allowed in the request object. This field is REQUIRED. The value of the "type" field is under the control of the AS. This field MUST be compared using an exact byte match of the string value against known types by the AS. The AS MUST ensure that there is no collision between different authorization data types that it supports. The AS MUST NOT do any collation or normalization of data types during comparison. It is RECOMMENDED that designers of general-purpose APIs use a URI for this field to avoid collisions between multiple API types protected by a single AS. While it is expected that many APIs will have its own properties, a set of common properties are defined here. Specific API implementations SHOULD NOT re-use these fields with different semantics or syntax. The available values for these properties are determined by the API being protected at the RS. actions (array of strings) The types of actions the client instance will take at the RS as an array of strings. For example, a client instance asking for a combination of "read" and "write" access. locations (array of strings) The location of the RS as an array of strings. These strings are typically URIs identifying the location of the RS. datatypes (array of strings) The kinds of data available to the client instance at the RS's API as an array of strings. For example, a client instance asking for access to raw "image" data and "metadata" at a photograph API. identifier (string) A string identifier indicating a specific resource at the RS. For example, a patient identifier for a medical API or a bank account number for a financial API. Richer, et al. Expires 26 August 2021 [Page 87] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The following non-normative example is describing three kinds of access (read, write, delete) to each of two different locations and two different data types (metadata, images) for a single access token using the fictitious "photo-api" type definition. "access": [ { "type": "photo-api", "actions": [ "read", "write", "delete" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] } ] The access requested for a given object when using these fields is the cross-product of all fields of the object. That is to say, the object represents a request for all "action" values listed within the object to be used at all "locations" values listed within the object for all "datatype" values listed within the object. Assuming the request above was granted, the client instance could assume that it would be able to do a "read" action against the "images" on the first server as well as a "delete" action on the "metadata" of the second server, or any other combination of these fields, using the same access token. To request a different combination of access, such as requesting one "action" against one "location" and a different "action" against a different "location", the client instance can include multiple separate objects in the "resources" array. The following non- normative example uses the same fictitious "photo-api" type definition to request a single access token with more specifically targeted access rights by using two discrete objects within the request. Richer, et al. Expires 26 August 2021 [Page 88] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access": [ { "type": "photo-api", "actions": [ "read" ], "locations": [ "https://server.example.net/" ], "datatypes": [ "images" ] }, { "type": "photo-api", "actions": [ "write", "delete" ], "locations": [ "https://resource.local/other" ], "datatypes": [ "metadata" ] } ] The access requested here is for "read" access to "images" on one server while simultaneously requesting "write" and "delete" access for "metadata" on a different server, but importantly without requesting "write" or "delete" access to "images" on the first server. It is anticipated that API designers will use a combination of common fields defined in this specification as well as fields specific to the API itself. The following non-normative example shows the use of both common and API-specific fields as part of two different fictitious API "type" values. The first access request includes the "actions", "locations", and "datatypes" fields specified here as well as the API-specific "geolocation" field. The second access request includes the "actions" and "identifier" fields specified here as well as the API-specific "currency" field. Richer, et al. Expires 26 August 2021 [Page 89] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access": [ { "type": "photo-api", "actions": [ "read", "write" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ], "geolocation": [ { lat: -32.364, lng: 153.207 }, { lat: -35.364, lng: 158.207 } ] }, { "type": "financial-transaction", "actions": [ "withdraw" ], "identifier": "account-14-32-32-3", "currency": "USD" } ] If this request is approved, the resulting access token (Section 3.2.1)'s access rights will be the union of the requested types of access for each of the two APIs, just as above. 8.1. Requesting Resources By Reference Instead of sending an object describing the requested resource (Section 8), access rights MAY be communicated as a string known to the AS or RS representing the access being requested. Each string SHOULD correspond to a specific expanded object representation at the AS. "access": [ "read", "dolphin-metadata", "some other thing" ] Richer, et al. Expires 26 August 2021 [Page 90] Internet-Draft Grant Negotiation and Authorization Prot February 2021 This value is opaque to the client instance and MAY be any valid JSON string, and therefore could include spaces, unicode characters, and properly escaped string sequences. However, in some situations the value is intended to be seen and understood by the client software's developer. In such cases, the API designer choosing any such human- readable strings SHOULD take steps to ensure the string values are not easily confused by a developer, such as by limiting the strings to easily disambiguated characters. This functionality is similar in practice to OAuth 2's "scope" parameter [RFC6749], where a single string represents the set of access rights requested by the client instance. As such, the reference string could contain any valid OAuth 2 scope value as in Appendix C.5. Note that the reference string here is not bound to the same character restrictions as in OAuth 2's "scope" definition. A single "access" array MAY include both object-type and string-type resource items. In this non-normative example, the client instance is requesting access to a "photo-api" and "financial-transaction" API type as well as the reference values of "read", "dolphin-metadata", and "some other thing". Richer, et al. Expires 26 August 2021 [Page 91] Internet-Draft Grant Negotiation and Authorization Prot February 2021 "access": [ { "type": "photo-api", "actions": [ "read", "write", "delete" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata", { "type": "financial-transaction", "actions": [ "withdraw" ], "identifier": "account-14-32-32-3", "currency": "USD" }, "some other thing" ] The requested access is the union of all elements of the array, including both objects and reference strings. 9. Discovery By design, the protocol minimizes the need for any pre-flight discovery. To begin a request, the client instance only needs to know the endpoint of the AS and which keys it will use to sign the request. Everything else can be negotiated dynamically in the course of the protocol. However, the AS can have limits on its allowed functionality. If the client instance wants to optimize its calls to the AS before making a request, it MAY send an HTTP OPTIONS request to the grant request endpoint to retrieve the server's discovery information. The AS MUST respond with a JSON document containing the following information: grant_request_endpoint (string) REQUIRED. The full URL of the AS's Richer, et al. Expires 26 August 2021 [Page 92] Internet-Draft Grant Negotiation and Authorization Prot February 2021 grant request endpoint. This MUST match the URL the client instance used to make the discovery request. capabilities (array of strings) OPTIONAL. A list of the AS's capabilities. The values of this result MAY be used by the client instance in the capabilities section (Section 2.6) of the request. interaction_methods (array of strings) OPTIONAL. A list of the AS's interaction methods. The values of this list correspond to the possible fields in the interaction section (Section 2.5) of the request. key_proofs (array of strings) OPTIONAL. A list of the AS's supported key proofing mechanisms. The values of this list correspond to possible values of the "proof" field of the key section (Section 7.1) of the request. sub_ids (array of strings) OPTIONAL. A list of the AS's supported identifiers. The values of this list correspond to possible values of the subject identifier section (Section 2.2) of the request. assertions (array of strings) OPTIONAL. A list of the AS's supported assertion formats. The values of this list correspond to possible values of the subject assertion section (Section 2.2) of the request. The information returned from this method is for optimization purposes only. The AS MAY deny any request, or any portion of a request, even if it lists a capability as supported. For example, a given client instance can be registered with the "mtls" key proofing mechanism, but the AS also returns other proofing methods, then the AS will deny a request from that client instance using a different proofing mechanism. 10. Resource Servers In some deployments, a resource server will need to be able to call the AS for a number of functions. [[ See issue #114 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/114) ]] 10.1. Introspecting a Token When the RS receives an access token, it can call the introspection endpoint at the AS to get token information. [[ See issue #115 (https://github.com/ietf-wg-gnap/gnap-core-protocol/issues/115) ]] Richer, et al. Expires 26 August 2021 [Page 93] Internet-Draft Grant Negotiation and Authorization Prot February 2021 +--------+ +------+ +------+ | Client |--(1)->| RS | | AS | |Instance| | |--(2)->| | | | | |<-(3)--| | | | | | +------+ | |<-(4)--| | +--------+ +------+ 1. The client instance calls the RS with its access token. 2. The RS introspects the access token value at the AS. The RS signs the request with its own key (not the client instance's key or the token's key). 3. The AS validates the token value and the client instance's request and returns the introspection response for the token. 4. The RS fulfills the request from the client instance. The RS signs the request with its own key and sends the access token as the body of the request. POST /introspect HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", } The AS responds with a data structure describing the token's current state and any information the RS would need to validate the token's presentation, such as its intended proofing mechanism and key material. Richer, et al. Expires 26 August 2021 [Page 94] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Content-Type: application/json { "active": true, "access": [ "dolphin-metadata", "some other thing" ], "client": { "key": { "proof": "httpsig", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeL...." } } } } 10.2. Deriving a downstream token Some architectures require an RS to act as a client instance and request a derived access token for a secondary RS. This internal token is issued in the context of the incoming access token. +--------+ +-------+ +------+ +-------+ | Client |--(1)->| RS1 | | AS | | RS2 | |Instance| | |--(2)->| | | | | | | |<-(3)--| | | | | | | | +------+ | | | | | | | | | | | |-----------(4)------->| | | | | |<----------(5)--------| | | |<-(6)--| | | | +--------+ +-------+ +-------+ 1. The client instance calls RS1 with an access token. 2. RS1 presents that token to the AS to get a derived token for use at RS2. RS1 indicates that it has no ability to interact with the RO. RS1 signs its request with its own key, not the token's key or the client instance's key. 3. The AS returns a derived token to RS1 for use at RS2. 4. RS1 calls RS2 with the token from (3). Richer, et al. Expires 26 August 2021 [Page 95] Internet-Draft Grant Negotiation and Authorization Prot February 2021 5. RS2 fulfills the call from RS1. 6. RS1 fulfills the call from client instance. If the RS needs to derive a token from one presented to it, it can request one from the AS by making a token request as described in Section 2 and presenting the existing access token's value in the "existing_access_token" field. The RS MUST identify itself with its own key and sign the request. [[ See issue #116 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/116) ]] POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": { "access": [ { "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ] }, "client": "7C7C4AZ9KHRS6X63AJAO", "existing_access_token": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0" } The AS responds with a token for the downstream RS2 as described in Section 3.2. Richer, et al. Expires 26 August 2021 [Page 96] Internet-Draft Grant Negotiation and Authorization Prot February 2021 10.3. Registering a Resource Handle If the RS needs to, it can post a set of resources as described in Section 8 to the AS's resource registration endpoint. The RS MUST identify itself with its own key and sign the request. POST /resource HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access": [ { "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ], "client": "7C7C4AZ9KHRS6X63AJAO" } The AS responds with a handle appropriate to represent the resources list that the RS presented. Content-Type: application/json { "resource_handle": "FWWIKYBQ6U56NL1" } The RS MAY make this handle available as part of a response (Section 10.4) or as documentation to developers. Richer, et al. Expires 26 August 2021 [Page 97] Internet-Draft Grant Negotiation and Authorization Prot February 2021 [[ See issue #117 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/117) ]] 10.4. Requesting Resources With Insufficient Access If the client instance calls an RS without an access token, or with an invalid access token, the RS MAY respond to the client instance with an authentication header indicating that GNAP needs to be used to access the resource. The address of the GNAP endpoint MUST be sent in the "as_uri" parameter. The RS MAY additionally return a resource reference that the client instance MAY use in its access token request (Section 2.1). This resource reference handle SHOULD be sufficient for at least the action the client instance was attempting to take at the RS. The RS MAY use the dynamic resource handle request (Section 10.3) to register a new resource handle, or use a handle that has been pre-configured to represent what the AS is protecting. The content of this handle is opaque to the RS and the client instance. WWW-Authenticate: GNAP as_uri=https://server.example/tx,resource=FWWIKYBQ6U56NL1 The client instance then makes a call to the "as_uri" as described in Section 2, with the value of "resource" as one of the members of the "access" array Section 2.1.1. The client instance MAY request additional resources and other information, and MAY request multiple access tokens. [[ See issue #118 (https://github.com/ietf-wg-gnap/gnap-core- protocol/issues/118) ]] 11. Acknowledgements The editors would like to thank the feedback of the following individuals for their reviews, implementations, and contributions: Aaron Parecki, Annabelle Backman, Dick Hardt, Dmitri Zagidulin, Dmitry Barinov, Fabien Imbault, Francis Pouatcha, George Fletcher, Haardik Haardik, Hamid Massaoud, Jacky Yuan, Joseph Heenan, Justin Richer, Kathleen Moriarty, Mike Jones, Mike Varley, Nat Sakimura, Takahiko Kawasaki, Takahiro Tsuchiya. The editors would also like to thank the GNAP working group design team of Kathleen Moriarty, Fabien Imbault, Dick Hardt, Mike Jones, and Justin Richer, who incorporated elements from the XAuth and XYZ proposals to create the first version of this document. In addition, the editors would like to thank Aaron Parecki and Mike Jones for insights into how to integrate identity and authentication systems into the core protocol, and Justin Richer and Dick Hardt for Richer, et al. Expires 26 August 2021 [Page 98] Internet-Draft Grant Negotiation and Authorization Prot February 2021 the use cases, diagrams, and insights provided in the XYZ and XAuth proposals that have been incorporated here. The editors would like to especially thank Mike Varley and the team at SecureKey for feedback and development of early versions of the XYZ protocol that fed into this standards work. 12. IANA Considerations [[ TBD: There are a lot of items in the document that are expandable through the use of value registries. ]] 13. Security Considerations [[ TBD: There are a lot of security considerations to add. ]] All requests have to be over TLS or equivalent as per [BCP195]. Many handles act as shared secrets, though they can be combined with a requirement to provide proof of a key as well. 14. Privacy Considerations [[ TBD: There are a lot of privacy considerations to add. ]] Handles are passed between parties and therefore should not contain any private data. When user information is passed to the client instance, the AS needs to make sure that it has the permission to do so. 15. Normative References [BCP195] Sheffer, Y., Holz, R., and P. Saint-Andre, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", May 2015, . [I-D.ietf-httpbis-message-signatures] Backman, A., Richer, J., and M. Sporny, "Signing HTTP Messages", Work in Progress, Internet-Draft, draft-ietf- httpbis-message-signatures-01, 17 November 2020, . [I-D.ietf-oauth-dpop] Fett, D., Campbell, B., Bradley, J., Lodderstedt, T., Jones, M., and D. Waite, "OAuth 2.0 Demonstrating Proof- of-Possession at the Application Layer (DPoP)", Work in Richer, et al. Expires 26 August 2021 [Page 99] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Progress, Internet-Draft, draft-ietf-oauth-dpop-02, 18 November 2020, . [I-D.ietf-oauth-signed-http-request] Richer, J., Bradley, J., and H. Tschofenig, "A Method for Signing HTTP Requests for OAuth", Work in Progress, Internet-Draft, draft-ietf-oauth-signed-http-request-03, 8 August 2016, . [I-D.ietf-secevent-subject-identifiers] Backman, A. and M. Scurtescu, "Subject Identifiers for Security Event Tokens", Work in Progress, Internet-Draft, draft-ietf-secevent-subject-identifiers-06, 4 September 2020, . [OIDC] Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, "OpenID Connect Core 1.0 incorporating errata set 1", November 2014, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3230] Mogul, J. and A. Van Hoff, "Instance Digests in HTTP", RFC 3230, DOI 10.17487/RFC3230, January 2002, . [RFC5646] Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646, September 2009, . [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, October 2012, . [RFC7468] Josefsson, S. and S. Leonard, "Textual Encodings of PKIX, PKCS, and CMS Structures", RFC 7468, DOI 10.17487/RFC7468, April 2015, . Richer, et al. Expires 26 August 2021 [Page 100] Internet-Draft Grant Negotiation and Authorization Prot February 2021 [RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, . [RFC7517] Jones, M., "JSON Web Key (JWK)", RFC 7517, DOI 10.17487/RFC7517, May 2015, . [RFC7797] Jones, M., "JSON Web Signature (JWS) Unencoded Payload Option", RFC 7797, DOI 10.17487/RFC7797, February 2016, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [RFC8693] Jones, M., Nadalin, A., Campbell, B., Ed., Bradley, J., and C. Mortimore, "OAuth 2.0 Token Exchange", RFC 8693, DOI 10.17487/RFC8693, January 2020, . [RFC8705] Campbell, B., Bradley, J., Sakimura, N., and T. Lodderstedt, "OAuth 2.0 Mutual-TLS Client Authentication and Certificate-Bound Access Tokens", RFC 8705, DOI 10.17487/RFC8705, February 2020, . Appendix A. Document History * -04 - Updated terminology. - Refactored key presentation and binding. - Refactored "interact" request to group start and end modes. - Changed access token request and response syntax. - Removed closed issue links. - Removed function to read state of grant request by client. Richer, et al. Expires 26 August 2021 [Page 101] Internet-Draft Grant Negotiation and Authorization Prot February 2021 - Closed issues related to reading and updating access tokens. * -03 - Changed "resource client" terminology to separate "client instance" and "client software". - Removed OpenID Connect "claims" parameter. - Dropped "short URI" redirect. - Access token is mandatory for continuation. - Removed closed issue links. - Editorial fixes. * -02 - Moved all "editor's note" items to GitHub Issues. - Added JSON types to fields. - Changed "GNAP Protocol" to "GNAP". - Editorial fixes. * -01 - "updated_at" subject info timestamp now in ISO 8601 string format. - Editorial fixes. - Added Aaron and Fabien as document authors. * -00 - Initial working group draft. Appendix B. Component Data Models While different implementations of this protocol will have different realizations of all the components and artifacts enumerated here, the nature of the protocol implies some common structures and elements for certain components. This appendix seeks to enumerate those common elements. Richer, et al. Expires 26 August 2021 [Page 102] Internet-Draft Grant Negotiation and Authorization Prot February 2021 TBD: Client has keys, allowed requested resources, identifier(s), allowed requested subjects, allowed TBD: AS has "grant endpoint", interaction endpoints, store of trusted client keys, policies TBD: Token has RO, user, client, resource list, RS list, Appendix C. Example Protocol Flows The protocol defined in this specification provides a number of features that can be combined to solve many different kinds of authentication scenarios. This section seeks to show examples of how the protocol would be applied for different situations. Some longer fields, particularly cryptographic information, have been truncated for display purposes in these examples. C.1. Redirect-Based User Interaction In this scenario, the user is the RO and has access to a web browser, and the client instance can take front-channel callbacks on the same device as the user. This combination is analogous to the OAuth 2 Authorization Code grant type. The client instance initiates the request to the AS. Here the client instance identifies itself using its public key. Richer, et al. Expires 26 August 2021 [Page 103] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": { "access": [ { "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] } ], }, "client": { "key": { "proof": "jwsd", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..." } } }, "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } } Richer, et al. Expires 26 August 2021 [Page 104] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The AS processes the request and determines that the RO needs to interact. The AS returns the following response giving the client instance the information it needs to connect. The AS has also indicated to the client instance that it can use the given instance identifier to identify itself in future requests (Section 2.3.1). Content-Type: application/json { "interact": { "redirect": "https://server.example.com/interact/4CF492MLVMSW9MKMXKHQ", "push": "MBDOFXG4Y5CVJCX821LH" } "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue" }, "instance_id": "7C7C4AZ9KHRS6X63AJAO" } The client instance saves the response and redirects the user to the interaction_url by sending the following HTTP message to the user's browser. HTTP 302 Found Location: https://server.example.com/interact/4CF492MLVMSW9MKMXKHQ The user's browser fetches the AS's interaction URL. The user logs in, is identified as the RO for the resource being requested, and approves the request. Since the AS has a callback parameter, the AS generates the interaction reference, calculates the hash, and redirects the user back to the client instance with these additional values added as query parameters. HTTP 302 Found Location: https://client.example.net/return/123455 ?hash=p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A &interact_ref=4IFWWIKYBC2PQ6U56NL1 Richer, et al. Expires 26 August 2021 [Page 105] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The client instance receives this request from the user's browser. The client instance ensures that this is the same user that was sent out by validating session information and retrieves the stored pending request. The client instance uses the values in this to validate the hash parameter. The client instance then calls the continuation URL and presents the handle and interaction reference in the request body. The client instance signs the request as above. POST /continue HTTP/1.1 Host: server.example.com Content-Type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } The AS retrieves the pending request based on the handle and issues a bearer access token and returns this to the client instance. Richer, et al. Expires 26 August 2021 [Page 106] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Content-Type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [{ "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }] }, "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue" } } C.2. Secondary Device Interaction In this scenario, the user does not have access to a web browser on the device and must use a secondary device to interact with the AS. The client instance can display a user code or a printable QR code. The client instance is not able to accept callbacks from the AS and needs to poll for updates while waiting for the user to authorize the request. The client instance initiates the request to the AS. Richer, et al. Expires 26 August 2021 [Page 107] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": { "access": [ "dolphin-metadata", "some other thing" ], }, "client": "7C7C4AZ9KHRS6X63AJAO", "interact": { "start": ["redirect", "user_code"] } } The AS processes this and determines that the RO needs to interact. The AS supports both redirect URIs and user codes for interaction, so it includes both. Since there is no "callback" the AS does not include a nonce, but does include a "wait" parameter on the continuation section because it expects the client instance to poll for results. Content-Type: application/json { "interact": { "redirect": "https://srv.ex/MXKHQ", "user_code": { "code": "A1BC-3DFF", "url": "https://srv.ex/device" } }, "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue/VGJKPTKC50", "wait": 60 } } The client instance saves the response and displays the user code visually on its screen along with the static device URL. The client instance also displays the short interaction URL as a QR code to be scanned. Richer, et al. Expires 26 August 2021 [Page 108] Internet-Draft Grant Negotiation and Authorization Prot February 2021 If the user scans the code, they are taken to the interaction endpoint and the AS looks up the current pending request based on the incoming URL. If the user instead goes to the static page and enters the code manually, the AS looks up the current pending request based on the value of the user code. In both cases, the user logs in, is identified as the RO for the resource being requested, and approves the request. Once the request has been approved, the AS displays to the user a message to return to their device. Meanwhile, the client instance periodically polls the AS every 60 seconds at the continuation URL. The client instance signs the request using the same key and method that it did in the first request. POST /continue/VGJKPTKC50 HTTP/1.1 Host: server.example.com Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... The AS retrieves the pending request based on the handle and determines that it has not yet been authorized. The AS indicates to the client instance that no access token has yet been issued but it can continue to call after another 60 second timeout. Content-Type: application/json { "continue": { "access_token": { "value": "G7YQT4KQQ5TZY9SLSS5E", "bound": true }, "uri": "https://server.example.com/continue/ATWHO4Q1WV", "wait": 60 } } Note that the continuation URL and access token have been rotated since they were used by the client instance to make this call. The client instance polls the continuation URL after a 60 second timeout using this new information. POST /continue/ATWHO4Q1WV HTTP/1.1 Host: server.example.com Authorization: GNAP G7YQT4KQQ5TZY9SLSS5E Detached-JWS: ejy0... Richer, et al. Expires 26 August 2021 [Page 109] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The AS retrieves the pending request based on the URL and access token, determines that it has been approved, and issues an access token for the client to use at the RS. Content-Type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [ "dolphin-metadata", "some other thing" ] } } C.3. No User Involvement In this scenario, the client instance is requesting access on its own behalf, with no user to interact with. The client instance creates a request to the AS, identifying itself with its public key and using MTLS to make the request. POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json { "access_token": { "access": [ "backend service", "nightly-routine-3" ], }, "client": { "key": { "proof": "mtls", "cert#S256": "bwcK0esc3ACC3DB2Y5_lESsXE8o9ltc05O89jdN-dg2" } } } The AS processes this and determines that the client instance can ask for the requested resources and issues an access token. Richer, et al. Expires 26 August 2021 [Page 110] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Content-Type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token", "access": [ "backend service", "nightly-routine-3" ] } } C.4. Asynchronous Authorization In this scenario, the client instance is requesting on behalf of a specific RO, but has no way to interact with the user. The AS can asynchronously reach out to the RO for approval in this scenario. The client instance starts the request at the AS by requesting a set of resources. The client instance also identifies a particular user. Richer, et al. Expires 26 August 2021 [Page 111] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": { "access": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata", { "type": "financial-transaction", "actions": [ "withdraw" ], "identifier": "account-14-32-32-3", "currency": "USD" }, "some other thing" ], }, "client": "7C7C4AZ9KHRS6X63AJAO", "user": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com" } ] } } Richer, et al. Expires 26 August 2021 [Page 112] Internet-Draft Grant Negotiation and Authorization Prot February 2021 The AS processes this and determines that the RO needs to interact. The AS determines that it can reach the identified user asynchronously and that the identified user does have the ability to approve this request. The AS indicates to the client instance that it can poll for continuation. Content-Type: application/json { "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "bound": true }, "uri": "https://server.example.com/continue", "wait": 60 } } The AS reaches out to the RO and prompts them for consent. In this example, the AS has an application that it can push notifications in to for the specified account. Meanwhile, the client instance periodically polls the AS every 60 seconds at the continuation URL. POST /continue HTTP/1.1 Host: server.example.com Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... The AS retrieves the pending request based on the handle and determines that it has not yet been authorized. The AS indicates to the client instance that no access token has yet been issued but it can continue to call after another 60 second timeout. Content-Type: application/json { "continue": { "access_token": { "value": "BI9QNW6V9W3XFJK4R02D", "bound": true }, "uri": "https://server.example.com/continue", "wait": 60 } } Richer, et al. Expires 26 August 2021 [Page 113] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Note that the continuation handle has been rotated since it was used by the client instance to make this call. The client instance polls the continuation URL after a 60 second timeout using the new handle. POST /continue HTTP/1.1 Host: server.example.com Authorization: GNAP BI9QNW6V9W3XFJK4R02D Detached-JWS: ejy0... The AS retrieves the pending request based on the handle and determines that it has been approved and it issues an access token. Content-Type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "bound": true, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "access": [ "dolphin-metadata", "some other thing" ] } } C.5. Applying OAuth 2 Scopes and Client IDs While GNAP is not designed to be directly compatible with OAuth 2 [RFC6749], considerations have been made to enable the use of OAuth 2 concepts and constructs more smoothly within GNAP. In this scenario, the client developer has a "client_id" and set of "scope" values from their OAuth 2 system and wants to apply them to the new protocol. Traditionally, the OAuth 2 client developer would put their "client_id" and "scope" values as parameters into a redirect request to the authorization endpoint. HTTP 302 Found Location: https://server.example.com/authorize ?client_id=7C7C4AZ9KHRS6X63AJAO &scope=read%20write%20dolphin &redirect_uri=https://client.example.net/return &response_type=code &state=123455 Now the developer wants to make an analogous request to the AS using GNAP. To do so, the client instance makes an HTTP POST and places the OAuth 2 values in the appropriate places. Richer, et al. Expires 26 August 2021 [Page 114] Internet-Draft Grant Negotiation and Authorization Prot February 2021 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: ejy0... { "access_token": { "access": [ "read", "write", "dolphin" ], "flags": [ "bearer" ] }, "client": "7C7C4AZ9KHRS6X63AJAO", "interact": { "start": ["redirect"], "finish": { "method": "redirect", "uri": "https://client.example.net/return?state=123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } } The client_id can be used to identify the client instance's keys that it uses for authentication, the scopes represent resources that the client instance is requesting, and the "redirect_uri" and "state" value are pre-combined into a "callback" URI that can be unique per request. The client instance additionally creates a nonce to protect the callback, separate from the state parameter that it has added to its return URL. From here, the protocol continues as above. Appendix D. JSON Structures and Polymorphism GNAP makes use of polymorphism within the JSON [RFC8259] structures used for the protocol. Each portion of this protocol is defined in terms of the JSON data type that its values can take, whether it's a string, object, array, boolean, or number. For some fields, different data types offer different descriptive capabilities and are used in different situations for the same field. Each data type provides a different syntax to express the same underlying semantic protocol element, which allows for optimization and simplification in many common cases. Even though JSON is often used to describe strongly typed structures, JSON on its own is naturally polymorphic. In JSON, the named members of an object have no type associated with them, and any data type can Richer, et al. Expires 26 August 2021 [Page 115] Internet-Draft Grant Negotiation and Authorization Prot February 2021 be used as the value for any member. In practice, each member has a semantic type that needs to make sense to the parties creating and consuming the object. Within this protocol, each object member is defined in terms of its semantic content, and this semantic content might have expressions in different concrete data types for different specific purposes. Since each object member has exactly one value in JSON, each data type for an object member field is naturally mutually exclusive with other data types within a single JSON object. For example, a resource request for a single access token is composed of an array of resource request descriptions while a request for multiple access tokens is composed of an object whose member values are all arrays. Both of these represent requests for access, but the difference in syntax allows the client instance and AS to differentiate between the two request types in the same request. Another form of polymorphism in JSON comes from the fact that the values within JSON arrays need not all be of the same JSON data type. However, within this protocol, each element within the array needs to be of the same kind of semantic element for the collection to make sense, even when the data types are different from each other. For example, each aspect of a resource request can be described using an object with multiple dimensional components, or the aspect can be requested using a string. In both cases, the resource request is being described in a way that the AS needs to interpret, but with different levels of specificity and complexity for the client instance to deal with. An API designer can provide a set of common access scopes as simple strings but still allow client software developers to specify custom access when needed for more complex APIs. Extensions to this specification can use different data types for defined fields, but each extension needs to not only declare what the data type means, but also provide justification for the data type representing the same basic kind of thing it extends. For example, an extension declaring an "array" representation for a field would need to explain how the array represents something akin to the non- array element that it is replacing. Authors' Addresses Justin Richer (editor) Bespoke Engineering Email: ietf@justin.richer.org URI: https://bspk.io/ Richer, et al. Expires 26 August 2021 [Page 116] Internet-Draft Grant Negotiation and Authorization Prot February 2021 Aaron Parecki Okta Email: aaron@parecki.com URI: https://aaronparecki.com Fabien Imbault acert.io Email: fabien.imbault@acert.io URI: https://acert.io/ Richer, et al. Expires 26 August 2021 [Page 117]