Network Working Group H. Chan (Ed.) Internet-Draft Huawei Technologies Intended status: Informational July 7, 2012 Expires: January 8, 2013 Requirements of distributed mobility management draft-ietf-dmm-requirements-00 Abstract The traditional hierarchical structure of cellular networks has led to deployment models which are heavily centralized. Mobility management with centralized mobility anchoring in existing hierarchical mobile networks is quite prone to suboptimal routing and issues related to scalability. Centralized functions present a single point of failure, and inevitably introduce longer delays and higher signaling loads for network operations related to mobility management. This document defines the requirements for distributed mobility management for IPv6 deployment. The objectives are to match the mobility deployment with the current trend in network evolution, to improve scalability, to avoid single point of failure, to enable transparency to upper layers only when needed, etc. The distributed mobility management also needs to be compatible with existing network deployments and end hosts, and be secured. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on January 8, 2013. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. Chan (Ed.) Expires January 8, 2013 [Page 1] Internet-Draft DMM-Reqs July 2012 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Conventions used in this document . . . . . . . . . . . . . . 5 3. Centralized versus distributed mobility management . . . . . . 5 3.1. Centralized mobility management . . . . . . . . . . . . . 5 3.2. Distributed mobility management . . . . . . . . . . . . . 6 4. Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.1. Distributed deployment . . . . . . . . . . . . . . . . . . 8 4.2. Transparency to Upper Layers when needed . . . . . . . . . 9 4.3. IPv6 deployment . . . . . . . . . . . . . . . . . . . . . 10 4.4. Compatibility . . . . . . . . . . . . . . . . . . . . . . 10 4.5. Existing mobility protocols . . . . . . . . . . . . . . . 11 4.6. Security considerations . . . . . . . . . . . . . . . . . 11 5. Security Considerations . . . . . . . . . . . . . . . . . . . 12 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12 7. Co-authors and Contributors . . . . . . . . . . . . . . . . . 12 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 13 8.1. Normative References . . . . . . . . . . . . . . . . . . . 13 8.2. Informative References . . . . . . . . . . . . . . . . . . 13 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 15 Chan (Ed.) Expires January 8, 2013 [Page 2] Internet-Draft DMM-Reqs July 2012 1. Introduction In the past decade a fair number of mobility protocols have been standardized. Although the protocols differ in terms of functions and associated message format, we can identify a few key common features: presence of a centralized mobility anchor providing global reachability and an always-on experience; extensions to optimize handover performance while users roam across wireless cells; extensions to enable the use of heterogeneous wireless interfaces for multi-mode terminals (e.g. cellular phones). The presence of the centralized mobility anchor allows a mobile device to be reachable when it is not connected to its home domain. The anchor point, among other tasks, ensures reachability of forwarding of packets destined to or sent from the mobile device. Most of the deployed architectures today have a small number of centralized anchors managing the traffic of millions of mobile subscribers. Compared with a distributed approach, a centralized approach is likely to have several issues or limitations affecting performance and scalability, which require costly network dimensioning and engineering to resolve. To optimize handovers from the perspective of mobile nodes, the base protocols have been extended to efficiently handle packet forwarding between the previous and new points of attachment. These extensions are necessary when applications impose stringent requirements in terms of delay. Notions of localization and distribution of local agents have been introduced to reduce signaling overhead. Unfortunately today we witness difficulties in getting such protocols deployed, often leading to sub-optimal choices. Moreover, the availability of multi-mode devices and the possibility of using several network interfaces simultaneously have motivated the development of more new protocol extensions. Deployment is further complicated with so many extensions. Mobile users are, more than ever, consuming Internet content; such traffic imposes new requirements on mobile core networks for data traffic delivery. When the traffic demand exceeds available capacity, service providers need to implement new strategies such as selective traffic offload (e.g. 3GPP work items LIPA/SIPTO) through alternative access networks (e.g. WLAN). Moreover, the localization of content providers closer to the Mobile/Fixed Internet Service Chan (Ed.) Expires January 8, 2013 [Page 3] Internet-Draft DMM-Reqs July 2012 Providers network requires taking into account local Content Delivery Networks (CDNs) while providing mobility services. When demand exceeds capacity, both offloading and CDN techniques could benefit from the development of mobile architectures with fewer levels of routing hierarchy introduced into the data path by the mobility management system. This trend in network flattening is reinforced by a shift in users traffic behavior, aimed at increasing direct communications among peers in the same geographical area. Distributed mobility management in a truly flat mobile architecture would anchor the traffic closer to the point of attachment of the user and overcome the suboptimal routing issues of a centralized mobility scheme. While deploying [Paper-Locating.User] today's mobile networks, service providers face new challenges. More often than not, mobile devices remain attached to the same point of attachment. Specific IP mobility management support is not required for applications that launch and complete while the mobile device is connected to the same point of attachment. However, the mobility support has been designed to be always on and to maintain the context for each mobile subscriber as long as they are connected to the network. This can result in a waste of resources and ever-increasing costs for the service provider. Infrequent mobility and intelligence of many applications suggest that mobility can be provided dynamically, thus simplifying the context maintained in the different nodes of the mobile network. The proposed charter will address two complementary aspects of mobility management procedures: the distribution of mobility anchors to achieve a more flat design and the dynamic activation/deactivation of mobility protocol support as an enabler to distributed mobility management. The former has the goal of positioning mobility anchors (HA, LMA) closer to the user; ideally, these mobility agents could be collocated with the first hop router. The latter, facilitated by the distribution of mobility anchors, aims at identifying when mobility must be activated and identifying sessions that do not impose mobility management -- thus reducing the amount of state information to be maintained in the various mobility agents of the mobile network. The key idea is that dynamic mobility management relaxes some constraints while also repositioning mobility anchors; it avoids the establishment of non optimal tunnels between two topologically distant anchors. This document describes the motivations of distributed mobility management in Section 1. Section 3 compares distributed mobility management with centralized mobility management. The requirements to address these problems are given in Section 4. Chan (Ed.) Expires January 8, 2013 [Page 4] Internet-Draft DMM-Reqs July 2012 The problem statement and the use cases [I-D.yokota-dmm-scenario] can be found in the following review paper: [Paper- Distributed.Mobility.Review]. 2. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL","SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Centralized versus distributed mobility management Mobility management functions may be implemented at different layers of the network protocol stack. At the IP (network) layer, they may reside in the network or in the mobile node. In particular, a network-based solution resides in the network only. It therefore enables mobility for existing hosts and network applications which are already in deployment but lack mobility support. At the IP layer, a mobility management protocol to achieve session continuity is typically based on the principle of distinguishing between identifier and routing address and maintaining a mapping between them. With Mobile IP, the home address serves as an identifier of the device whereas the care-of-address takes the role of routing address, and the binding between them is maintained at the mobility anchor, i.e., the home agent. If packets can be continuously delivered to a mobile device at its home address, then all sessions using that home address can be preserved even though the routing or care-of address changes. The next two subsections explain centralized and distributed mobility management functions in the network. 3.1. Centralized mobility management With centralized mobility management, the mapping information between the stable node identifier and the changing IP address of a mobile node (MN) is kept at a centralized mobility anchor. Packets destined to an MN are routed via this anchor. In other words, such mobility management systems are centralized in both the control plane and the data plane. Many existing mobility management deployments make use of centralized mobility anchoring in a hierarchical network architecture, as shown in Figure 1. Examples of such centralized mobility anchors are the home agent (HA) and local mobility anchor (LMA) in Mobile IPv6 Chan (Ed.) Expires January 8, 2013 [Page 5] Internet-Draft DMM-Reqs July 2012 [RFC6275] and Proxy Mobile IPv6 [RFC5213], respectively. Current mobile networks such as the Third Generation Partnership Project (3GPP) UMTS networks, CDMA networks, and 3GPP Evolved Packet System (EPS) networks also employ centralized mobility management, with Gateway GPRS Support Node (GGSN) and Serving GPRS Support Node (SGSN) in the 3GPP UMTS hierarchical network and with Packet data network Gateway (P-GW) and Serving Gateway (S-GW) in the 3GPP EPS network. UMTS 3GPP SAE MIP/PMIP +------+ +------+ +------+ | GGSN | | P-GW | |HA/LMA| +------+ +------+ +------+ /\ /\ /\ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ +------+ +------+ +------+ +------+ +------+ +------+ | SGSN | | SGSN | | S-GW | | S-GW | |FA/MAG| |FA/MAG| +------+ +------+ +------+ +------+ +------+ +------+ Figure 1. Centralized mobility management. 3.2. Distributed mobility management Mobility management functions may also be distributed to multiple locations in different networks as shown in Figure 2, so that a mobile node in any of these networks may be served by a closeby mobility function (MF). +------+ +------+ +------+ +------+ | MF | | MF | | MF | | MF | +------+ +------+ +------+ +------+ | ---- | MN | ---- Figure 2. Distributed mobility management. Mobility management may be partially distributed, i.e., only the data plane is distributed, or fully distributed where both the data plane and control plane are distributed. These different approaches are described in detail in [I-D.yokota-dmm-scenario]. [Paper-New.Perspective] discusses some initial steps towards a clear Chan (Ed.) Expires January 8, 2013 [Page 6] Internet-Draft DMM-Reqs July 2012 definition of what mobility management may be, to assist in better developing distributed architecture. [Paper- Characterization.Mobility.Management] analyses current mobility solutions and proposes an initial decoupling of mobility management into well-defined functional blocks, identifying their interactions, as well as a potential grouping, which later can assist in deriving more flexible mobility management architectures. According to the split functional blocks, this paper proposes three ways into which mobility management functional blocks can be groups, as an initial way to consider a better distribution: location and handover management, control and data plane, user and access perspective. A distributed mobility management scheme is proposed in [Paper- Distributed.Dynamic.Mobility] for future flat IP architecture consisting of access nodes. The benefits of this design over centralized mobility management are also verified through simulations in [Paper-Distributed.Centralized.Mobility]. Before designing new mobility management protocols for a future flat IP architecture, one should first ask whether the existing mobility management protocols that have already been deployed for the hierarchical mobile networks can be extended to serve the flat IP architecture. MIPv4 has already been deployed in 3GPP2 networks, and PMIPv6 has already been adopted in WiMAX Forum and in 3GPP standards. Using MIP or PMIP for both centralized and distributed architectures would ease the migration of the current mobile networks towards a flat architecture. It has therefore been proposed to adapt MIP or PMIPv6 to achieve distributed mobility management by using a distributed mobility anchor architecture. In [Paper-Migrating.Home.Agents], the HA functionality is copied to many locations. The HoA of all MNs are anycast addresses, so that a packet destined to the HoA from any corresponding node (CN) from any network can be routed via the nearest copy of the HA. In addition, distributing the function of HA using a distributed hash table structure is proposed in [Paper-Distributed.Mobility.SAE]. A lookup query to the hash table will retrieve the location information of an MN is stored. In [Paper-Distributed.Mobility.PMIP], only the mobility routing (MR) function is duplicated and distributed in many locations. The location information for any MN that has moved to a visited network is still centralized and kept at a location management (LM) function in the home network of the MN. The LM function at different networks constitutes a distributed database system of all the MNs that belong to any of these networks and have moved to a visited network. The location information is maintained in the form of a hierarchy: the LM at the home network, the CoA of the MR of the visited network, and Chan (Ed.) Expires January 8, 2013 [Page 7] Internet-Draft DMM-Reqs July 2012 then the CoA to reach the MN in the visited network. The LM in the home network keeps a binding of the HoA of the MN to the CoA of the MR of the visited network. The MR keeps the binding of the HoA of the MN to the CoA of the MN in the case of MIP, or the proxy-CoA of the Mobile Access Gateway (MAG) serving the MN in the case of PMIP. [I-D.jikim-dmm-pmip] discusses two distributed mobility control schemes using the PMIP protocol: Signal-driven PMIP (S-PMIP) and Signal-driven Distributed PMIP (SD-PMIP). S-PMIP is a partially distributed scheme, in which the control plane (using a Proxy Binding Query to get the Proxy-CoA of the MN) is separate from the data plane, and the optimized data path is directly between the CN and the MN. SD-PMIP is a fully distributed scheme, in which the Proxy Binding Update is not performed, and instead each MAG will multicast a Proxy Binding Query message to all of the MAGs in its local PMIP domain to retrieve the Proxy-CoA of the MN. 4. Requirements After reviewing the problems and limitations of centralized deployment in Section 4, this section states the requirements as follows: 4.1. Distributed deployment REQ1: Distributed deployment IP mobility, network access and routing solutions provided by DMM MUST enable a distributed deployment of mobility management of IP sessions so that the traffic can be routed in an optimal manner without traversing centrally deployed mobility anchors. Motivation: The motivations of this requirement are to match mobility deployment with current trend in network evolution: more cost and resource effective to cache and distribute contents when combining distributed anchors with caching systems (e.g., CDN); improve scalability; avoid single point of failure; mitigate threats being focused on a centrally deployed anchor, e.g., home agent and local mobility anchor. This requirement addresses the following problems PS1, PS2, PS3, and PS4. Chan (Ed.) Expires January 8, 2013 [Page 8] Internet-Draft DMM-Reqs July 2012 PS1: Non-optimal routes Routing via a centralized anchor often results in a longer route, and the problem is especially manifested when accessing a local or cache server of a Content Delivery Network (CDN). PS2: Non-optimality in Evolved Network Architecture The centralized mobility management can become non-optimal as a network architecture evolves and becomes more flattened. PS3: Low scalability of centralized route and mobility context maintenance Setting up such special routes and maintaining the mobility context for each MN is more difficult to scale in a centralized design with a large number of MNs. Distributing the route maintenance function and the mobility context maintenance function among different networks can be more scalable. PS4: Single point of failure and attack Centralized anchoring may be more vulnerable to single point of failure and attack than a distributed system. 4.2. Transparency to Upper Layers when needed REQ2: Transparency to Upper Layers when needed The DMM solutions MUST provide transparency above the IP layer when needed. Such transparency is needed, when the mobile hosts or entire mobile networks [RFC3963] change their point of attachment to the Internet, for the application flows that cannot cope with a change of IP address. Otherwise the support to maintain a stable home IP address or prefix during handover may be declined. Motivation: The motivation of this requirement is to enable more efficient use of network resources and more efficient routing by not maintaining a stable IP home IP address when there is no such need. This requirement addresses the problems PS5 as well as the other related problem O-PS1. Chan (Ed.) Expires January 8, 2013 [Page 9] Internet-Draft DMM-Reqs July 2012 PS5: Wasting resources to support mobile nodes not needing mobility support IP mobility support is not always required. For example, some applications do not need a stable IP address during handover, i.e., IP session continuity. Sometimes, the entire application session runs while the terminal does not change the point of attachment. In these situations that do not require IP mobility support, network resources are wasted when mobility context is set up. O-PS1: Mobility signaling overhead with peer-to-peer communication Wasting resources when mobility signaling (e.g., maintenance of the tunnel, keep alive, etc.) is not turned off for peer- to-peer communication. 4.3. IPv6 deployment REQ3: IPv6 deployment The DMM solutions SHOULD target IPv6 as primary deployment and SHOULD NOT be tailored specifically to support IPv4, in particular in situations where private IPv4 addresses and/or NATs are used. Motivation: The motivation for this requirement is to be inline with the general orientation of IETF. Moreover, DMM deployment is foreseen in mid-term/long-term, hopefully in an IPv6 world. It is also unnecessarily complex to solve this problem for IPv4, as we will not be able to use some of the IPv6-specific features/tools. 4.4. Compatibility REQ4: Compatibility The DMM solution SHOULD be able to work between trusted administrative domains when allowed by the security measures deployed between these domains. Furthermore, the DMM solution MUST be able to co-exist with existing network deployment and end hosts so that the existing deployment can continue to be supported. For example, depending on the environment in which dmm is deployed, the dmm solutions may need to be compatible with other existing mobility protocols that are deployed in that environment or may need to be interoperable with the network or the mobile hosts/routers that do not support the dmm enabling protocol. Chan (Ed.) Expires January 8, 2013 [Page 10] Internet-Draft DMM-Reqs July 2012 Motivation: The motivation of this requirement is to allow inter-domain operation if desired and to preserve backwards compatibility so that the existing networks and hosts are not affected and do not break. This requirement addresses the following other related problem O-PS2. O-PS2: Complicated deployment with too many variants and extensions of MIP Deployment is complicated with many variants and extensions of MIP. When introducing new functions which may add to the complicity, existing solutions are more vulnerable to break. 4.5. Existing mobility protocols REQ5: Existing mobility protocols A DMM solution SHOULD first consider reusing and extending the existing mobility protocols before specifying new protocols. Motivation: The purpose is to reuse the existing protocols first before considering new protocols. 4.6. Security considerations REQ6: Security considerations The protocol solutions for DMM MUST consider security, for example authentication and authorization mechanisms that allow a legitimate mobile host/router to access to the DMM service, protection of signaling messages of the protocol solutions in terms of authentication, data integrity, and data confidentiality, opti-in or opt-out data confidentiality to signaling messages depending on network environments or user requirements. Motivation and problem statement: Mutual authentication and authorization between a mobile host/router and an access router providing the DMM service to the mobile host/router are required to prevent potential attacks in the access network of the DMM service. Otherwise, various attacks such as impersonation, denial of service, man-in-the-middle attacks, etc. are present to obtain illegitimate access or to collapse the DMM service. Signaling messages are subject to various attacks since these messages carry context of a mobile host/router. For instance, a malicious node can forge and send a number of signaling Chan (Ed.) Expires January 8, 2013 [Page 11] Internet-Draft DMM-Reqs July 2012 messages to redirect traffic to a specific node. Consequently, the specific node is under a denial of service attack, whereas other nodes are not receiving their traffic. As signaling messages travel over the Internet, the end-to-end security is required. 5. Security Considerations Distributed mobility management (DMM) requires two kinds of security considerations: 1) access network security that only allows a legitimate mobile host/router to access the DMM service; 2) end-to- end security that protects signaling messages for the DMM service. Access network security is required between the mobile host/router and the access network providing the DMM service. End-to-end security is required between nodes that participate in the DMM protocol. It is necessary to provide sufficient defense against possible security attacks, or to adopt existing security mechanisms and protocols to provide sufficient security protections. For instance, EAP based authentication can be used for access network security, while IPsec can be used for end-to-end security. 6. IANA Considerations None 7. Co-authors and Contributors This problem statement document is a joint effort among the following participants. Each individual has made significant contributions to this work. Dapeng Liu: liudapeng@chinamobile.com Pierrick Seite: pierrick.seite@orange-ftgroup.com Hidetoshi Yokota: yokota@kddilabs.jp Charles E. Perkins: charliep@computer.org Melia Telemaco: telemaco.melia@alcatel-lucent.com Elena Demaria: elena.demaria@telecomitalia.it Chan (Ed.) Expires January 8, 2013 [Page 12] Internet-Draft DMM-Reqs July 2012 Peter McCann: Peter.McCann@huawei.com Tricci So: tso@zteusa.com Jong-Hyouk Lee: jh.lee@telecom-bretagne.eu Jouni Korhonen: jouni.korhonen@nsn.com Wen Luo: luo.wen@zte.com.cn Carlos J. Bernardos: cjbc@it.uc3m.es Marco Liebsch: Marco.Liebsch@neclab.eu Georgios Karagian: karagian@cs.utwente.nl Julien Laganier: jlaganier@juniper.net Wassim Michel Haddad: Wassam.Haddad@ericsson.com Seok Joo Koh: sjkoh@knu.ac.kr 8. References 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. 8.2. Informative References [I-D.ietf-netext-pd-pmip] Zhou, X., Korhonen, J., Williams, C., Gundavelli, S., and C. Bernardos, "Prefix Delegation for Proxy Mobile IPv6", draft-ietf-netext-pd-pmip-02 (work in progress), March 2012. [I-D.jikim-dmm-pmip] Kim, J., Koh, S., Jung, H., and Y. Han, "Use of Proxy Mobile IPv6 for Distributed Mobility Control", draft-jikim-dmm-pmip-00 (work in progress), March 2012. [I-D.yokota-dmm-scenario] Yokota, H., Seite, P., Demaria, E., and Z. Cao, "Use case scenarios for Distributed Mobility Management", draft-yokota-dmm-scenario-00 (work in progress), October 2010. Chan (Ed.) Expires January 8, 2013 [Page 13] Internet-Draft DMM-Reqs July 2012 [Paper-Distributed.Centralized.Mobility] Bertin, P., Bonjour, S., and J-M. Bonnin, "A Distributed or Centralized Mobility", Proceedings of Global Communications Conference (GlobeCom), December 2009. [Paper-Distributed.Dynamic.Mobility] Bertin, P., Bonjour, S., and J-M. Bonnin, "A Distributed Dynamic Mobility Management Scheme Designed for Flat IP Architectures", Proceedings of 3rd International Conference on New Technologies, Mobility and Security (NTMS), 2008. [Paper-Distributed.Mobility.PMIP] Chan, H., "Proxy Mobile IP with Distributed Mobility Anchors", Proceedings of GlobeCom Workshop on Seamless Wireless Mobility, December 2010. [Paper-Distributed.Mobility.Review] Chan, H., Yokota, H., Xie, J., Seite, P., and D. Liu, "Distributed and Dynamic Mobility Management in Mobile Internet: Current Approaches and Issues, Journal of Communications, vol. 6, no. 1, pp. 4-15, Feb 2011.", Proceedings of GlobeCom Workshop on Seamless Wireless Mobility, February 2011. [Paper-Distributed.Mobility.SAE] Fisher, M., Anderson, F., Kopsel, A., Schafer, G., and M. Schlager, "A Distributed IP Mobility Approach for 3G SAE", Proceedings of the 19th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), 2008. [Paper-Locating.User] Kirby, G., "Locating the User", Communication International, 1995. [Paper-Migrating.Home.Agents] Wakikawa, R., Valadon, G., and J. Murai, "Migrating Home Agents Towards Internet-scale Mobility Deployments", Proceedings of the ACM 2nd CoNEXT Conference on Future Networking Technologies, December 2006. [RFC3963] Devarapalli, V., Wakikawa, R., Petrescu, A., and P. Thubert, "Network Mobility (NEMO) Basic Support Protocol", RFC 3963, January 2005. [RFC5213] Gundavelli, S., Leung, K., Devarapalli, V., Chowdhury, K., and B. Patil, "Proxy Mobile IPv6", RFC 5213, August 2008. Chan (Ed.) Expires January 8, 2013 [Page 14] Internet-Draft DMM-Reqs July 2012 [RFC6275] Perkins, C., Johnson, D., and J. Arkko, "Mobility Support in IPv6", RFC 6275, July 2011. Author's Address H Anthony Chan (editor) Huawei Technologies 5340 Legacy Dr. Building 3, Plano, TX 75024, USA Email: h.a.chan@ieee.org - Dapeng Liu China Mobile Unit2, 28 Xuanwumenxi Ave, Xuanwu District, Beijing 100053, China Email: liudapeng@chinamobile.com - Pierrick Seite France Telecom - Orange 4, rue du Clos Courtel, BP 91226, Cesson-Sevigne 35512, France Email: pierrick.seite@orange-ftgroup.com - Hidetoshi Yokota KDDI Lab 2-1-15 Ohara, Fujimino, Saitama, 356-8502 Japan Email: yokota@kddilabs.jp - Charles E. Perkins Huawei Technologies Email: charliep@computer.org - Jouni Korhonen Nokia Siemens Networks Email: jouni.korhonen@nsn.com - Melia Telemaco Alcatel-Lucent Bell Labs Email: telemaco.melia@alcatel-lucent.com - Elena Demaria Telecom Italia via G. Reiss Romoli, 274, TORINO, 10148, Italy Email: elena.demaria@telecomitalia.it - Jong-Hyouk Lee RSM Department, Telecom Bretagne Cesson-Sevigne, 35512, France Email: jh.lee@telecom-bretagne.eu - Chan (Ed.) Expires January 8, 2013 [Page 15] Internet-Draft DMM-Reqs July 2012 Tricci So ZTE Email: tso@zteusa.com - Carlos J. Bernardos Universidad Carlos III de Madrid Av. Universidad, 30, Leganes, Madrid 28911, Spain Email: cjbc@it.uc3m.es - Peter McCann Huawei Technologies Email: PeterMcCann@huawei.com - Seok Joo Koh Kyungpook National University, Korea Email: sjkoh@knu.ac.kr - Wen Luo ZTE No.68, Zijinhua RD,Yuhuatai District, Nanjing, Jiangsu 210012, China Email: luo.wen@zte.com.cn - Marco Liebsch NEC Laboratories Europe Email: liebsch@neclab.eu - Chan (Ed.) Expires January 8, 2013 [Page 16]