INTERNET-DRAFT Geoffrey Clemm, Rational Software draft-ietf-deltav-versioning-15 Jim Amsden, IBM Chris Kaler, Microsoft Jim Whitehead, U.C. Santa Cruz Expires October 17, 2001 April 17, 2001 Versioning Extensions to WebDAV Status of this Memo This document is an Internet-Draft and is in full conformance with all provisions of RFC 2026, Section 10. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Abstract This document specifies a set of methods, headers, and resource types that define the WebDAV Versioning extensions to the HTTP/1.1 protocol. WebDAV Versioning will minimize the complexity of clients that are capable of interoperating with a variety of versioning repository managers, to facilitate widespread deployment of applications capable of utilizing the WebDAV Versioning services. WebDAV Versioning includes: - Automatic versioning for versioning-unaware clients, - Version history management, - Workspace management, - Baseline management, - Activity management, and - URL namespace versioning. Clemm, et al. [Page 1] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Table of Contents 1 INTRODUCTION...........................................7 1.1 Relationship to WebDAV...............................7 1.2 Notational Conventions...............................8 1.3 Terms................................................8 1.4 Property Values.....................................11 1.4.1 Initial Property Value...........................11 1.4.2 Protected Property Value.........................11 1.4.3 Computed Property Value..........................12 1.4.4 Boolean Property Value...........................12 1.4.5 DAV:href Property Value..........................12 1.5 DAV Namespace XML Elements in Request and Response Bodies..............................................12 1.6 Response Bodies for 403 and 409 Status Responses....12 1.6.1 Example - CHECKOUT request with DAV:must-not-be-checked-out response.............13 1.7 Clarification of COPY Semantics with Overwrite:T....13 1.8 Versioning Methods and Write Locks..................14 2 BASIC VERSIONING FEATURES.............................14 2.1 Basic Versioning Packages...........................14 2.2 Basic Versioning Semantics..........................15 2.2.1 Creating a Version-Controlled Resource...........15 2.2.2 Modifying a Version-Controlled Resource..........17 2.2.3 Reporting........................................19 3 VERSION-CONTROL FEATURE...............................19 3.1 Additional Resource Properties......................19 3.1.1 DAV:comment......................................19 3.1.2 DAV:creator-displayname..........................19 3.1.3 DAV:supported-method-set (protected).............20 3.1.4 DAV:supported-live-property-set (protected)......20 3.1.5 DAV:supported-report-set (protected).............20 3.2 Version-Controlled Resource Properties..............20 3.2.1 DAV:checked-in (protected).......................20 3.2.2 DAV:auto-checkout................................21 3.2.3 DAV:auto-checkin.................................21 3.3 Checked-Out Resource Properties.....................21 3.3.1 DAV:checked-out (protected)......................22 3.3.2 DAV:predecessor-set..............................22 3.3.3 DAV:precursor-set................................22 3.4 Version Properties..................................22 3.4.1 DAV:predecessor-set (protected)..................22 3.4.2 DAV:successor-set (computed).....................22 3.4.3 DAV:checkout-set (computed)......................22 3.4.4 DAV:version-name (protected).....................23 3.4.5 DAV:precursor-set (protected)....................23 3.5 VERSION-CONTROL Method..............................23 3.5.1 Example - VERSION-CONTROL........................24 3.6 REPORT Method.......................................24 3.7 DAV:version-tree REPORT.............................25 3.7.1 Example - DAV:version-tree REPORT................26 3.8 Additional OPTIONS Semantics........................27 Clemm, et al. [Page 2] INTERNET-DRAFT WebDAV Versioning April 17, 2001 3.9 Additional PUT Semantics............................27 3.10 Additional PROPFIND Semantics......................28 3.11 Additional PROPPATCH Semantics.....................28 3.12 Additional DELETE Semantics........................29 3.13 Additional COPY Semantics..........................29 3.14 Additional MOVE Semantics..........................30 3.15 Additional UNLOCK Semantics........................30 4 CHECKOUT FEATURE......................................31 4.1 Additional Version Properties.......................31 4.1.1 DAV:checkout-fork................................31 4.1.2 DAV:checkin-fork.................................32 4.2 CHECKOUT Method.....................................32 4.2.1 Example - CHECKOUT of a version-controlled resource.........................................33 4.3 CHECKIN Method......................................34 4.3.1 Example - CHECKIN................................35 4.4 UNCHECKOUT Method...................................35 4.4.1 Example - UNCHECKOUT.............................36 4.5 Additional OPTIONS Semantics........................36 5 VERSION-HISTORY FEATURE...............................36 5.1 Version History Properties..........................37 5.1.1 DAV:version-set (protected)......................37 5.1.2 DAV:root-version (computed)......................37 5.2 Additional Version-Controlled Resource Properties...37 5.2.1 DAV:version-history (computed)...................37 5.3 Additional Version Properties.......................37 5.3.1 DAV:version-history (computed)...................37 5.4 DAV:locate-history REPORT...........................38 5.4.1 Example - DAV:locate-history REPORT..............38 5.5 Additional OPTIONS Semantics........................39 5.6 Additional DELETE Semantics.........................40 5.7 Additional COPY Semantics...........................40 5.8 Additional MOVE Semantics...........................40 5.9 Additional VERSION-CONTROL Semantics................41 5.10 Additional CHECKIN Semantics.......................41 6 WORKSPACE FEATURE.....................................41 6.1 Workspace Properties................................42 6.1.1 DAV:workspace-checkout-set (computed)............42 6.2 Additional Resource Properties......................42 6.2.1 DAV:workspace (protected)........................42 6.3 MKWORKSPACE Method..................................42 6.3.1 Example - MKWORKSPACE............................43 6.4 Additional OPTIONS Semantics........................43 6.5 Additional DELETE Semantics.........................44 6.6 Additional MOVE Semantics...........................44 6.7 Additional VERSION-CONTROL Semantics................45 6.7.1 Example - VERSION-CONTROL (using an existing version history).................................45 7 UPDATE FEATURE........................................46 7.1 UPDATE Method.......................................46 7.1.1 Example - UPDATE.................................47 7.2 Additional OPTIONS Semantics........................47 Clemm, et al. [Page 3] INTERNET-DRAFT WebDAV Versioning April 17, 2001 8 LABEL FEATURE.........................................47 8.1 Additional Version Properties.......................48 8.1.1 DAV:label-name-set (protected)...................48 8.2 LABEL Method........................................48 8.2.1 Example - Setting a label........................49 8.3 Label Header........................................50 8.4 Additional OPTIONS Semantics........................50 8.5 Additional GET Semantics............................50 8.6 Additional PROPFIND Semantics.......................51 8.7 Additional COPY Semantics...........................51 8.8 Additional CHECKOUT Semantics.......................52 8.9 Additional UPDATE Semantics.........................52 9 WORKING-RESOURCE FEATURE..............................53 9.1 Working Resource Properties.........................53 9.2 Additional OPTIONS Semantics........................54 9.3 Additional COPY Semantics...........................54 9.4 Additional MOVE Semantics...........................54 9.5 Additional CHECKOUT Semantics.......................54 9.5.1 Example - CHECKOUT of a version..................55 9.6 Additional CHECKIN Semantics........................55 9.6.1 Example - CHECKIN of a working resource..........55 10 ADVANCED VERSIONING FEATURES........................56 10.1 Rationale..........................................56 10.2 Advanced Versioning Terms..........................56 10.3 Advanced Versioning Packages.......................57 11 MERGE FEATURE.......................................58 11.1 Additional Checked-Out Resource Properties.........58 11.1.1 DAV:merge-set...................................59 11.1.2 DAV:auto-merge-set..............................59 11.2 MERGE Method.......................................59 11.2.1 Example - MERGE.................................62 11.3 DAV:merge-preview REPORT...........................63 11.3.1 Example - DAV:merge-preview REPORT..............63 11.4 Additional OPTIONS Semantics.......................64 11.5 Additional DELETE Semantics........................65 11.6 Additional CHECKIN Semantics.......................65 12 BASELINE FEATURE....................................65 12.1 Version-Controlled Configuration Properties........66 12.1.1 DAV:baseline-controlled-collection (protected)..66 12.2 Checked-Out Configuration Properties...............66 12.2.1 DAV:subbaseline-set.............................66 12.3 Baseline Properties................................66 12.3.1 DAV:baseline-collection (protected).............67 12.3.2 DAV:subbaseline-set (protected).................67 12.4 Additional Resource Properties.....................67 12.4.1 DAV:version-controlled-configuration (computed).67 12.5 Additional Workspace Properties....................67 12.5.1 DAV:baseline-controlled-collection-set (computed)......................................67 12.6 BASELINE-CONTROL Method............................68 12.6.1 Example - BASELINE-CONTROL......................69 Clemm, et al. [Page 4] INTERNET-DRAFT WebDAV Versioning April 17, 2001 12.7 DAV:compare-baseline REPORT........................70 12.7.1 Example - DAV:compare-baseline REPORT...........70 12.8 Additional OPTIONS Semantics.......................71 12.9 Additional MKCOL Semantics.........................71 12.10 Additional COPY Semantics.........................72 12.11 Additional CHECKOUT Semantics.....................72 12.12 Additional CHECKIN Semantics......................72 12.13 Additional UPDATE Semantics.......................73 12.14 Additional MERGE Semantics........................74 13 ACTIVITY FEATURE....................................74 13.1 Activity Properties................................76 13.1.1 DAV:activity-version-set (computed).............76 13.1.2 DAV:activity-checkout-set (computed)............76 13.1.3 DAV:subactivity-set.............................76 13.1.4 DAV:current-workspace-set (computed)............76 13.2 Additional Version Properties......................77 13.2.1 DAV:activity-set................................77 13.3 Additional Checked-Out Resource Properties.........77 13.3.1 DAV:unreserved..................................77 13.3.2 DAV:activity-set................................77 13.4 Additional Workspace Properties....................78 13.4.1 DAV:current-activity-set........................78 13.5 MKACTIVITY Method..................................78 13.5.1 Example - MKACTIVITY............................78 13.6 DAV:latest-activity-version REPORT.................79 13.7 Additional OPTIONS Semantics.......................79 13.8 Additional DELETE Semantics........................80 13.9 Additional MOVE Semantics..........................80 13.10 Additional CHECKOUT Semantics.....................81 13.10.1 Example - CHECKOUT with an activity............81 13.11 Additional CHECKIN Semantics......................82 13.12 Additional MERGE Semantics........................82 14 VERSION-CONTROLLED-COLLECTION FEATURE...............83 14.1 Version-Controlled Collection Properties...........85 14.1.1 DAV:eclipsed-set (computed).....................85 14.2 Collection Version Properties......................86 14.2.1 DAV:version-controlled-binding-set (protected)..86 14.3 Working Collection Properties......................86 14.3.1 DAV:version-controlled-binding-set..............86 14.4 Additional OPTIONS Semantics.......................86 14.5 Additional DELETE Semantics........................87 14.6 Additional MKCOL Semantics.........................87 14.7 Additional COPY Semantics..........................87 14.8 Additional MOVE Semantics..........................87 14.9 Additional VERSION-CONTROL Semantics...............88 14.10 Additional CHECKOUT Semantics.....................88 14.11 Additional CHECKIN Semantics......................88 14.12 Additional UPDATE and MERGE Semantics.............88 15 OPTIONAL REPORTS....................................89 15.1 DAV:expand-property REPORT.........................89 15.1.1 Example - DAV:expand-property...................90 Clemm, et al. [Page 5] INTERNET-DRAFT WebDAV Versioning April 17, 2001 16 INTERNATIONALIZATION CONSIDERATIONS.................91 17 SECURITY CONSIDERATIONS.............................92 17.1 Auditing and Traceability..........................92 17.2 Increased Need for Access Control..................93 17.3 Security Through Obscurity.........................93 17.4 Denial of Service..................................93 18 IANA CONSIDERATIONS.................................93 19 INTELLECTUAL PROPERTY...............................94 20 ACKNOWLEDGEMENTS....................................94 21 REFERENCES..........................................94 22 AUTHORS' ADDRESSES..................................96 Clemm, et al. [Page 6] INTERNET-DRAFT WebDAV Versioning April 17, 2001 1 INTRODUCTION This document specifies a set of methods, headers, and properties that define the WebDAV versioning extensions to the HTTP/1.1 protocol. Versioning is concerned with tracking and accessing the history of important states of a web resource, such as a standalone web page. The benefits of versioning in the context of the worldwide web include: - A resource has an explicit history and a persistent identity across the various states it has had during the course of that history. It allows browsing through past and alternative versions of a resource. Frequently the modification and authorship history of a resource is critical information in itself. - Resource states (versions) are given stable names that can support externally stored links for annotation and link server support. Both annotation and link servers frequently need to store stable references to portions of resources that are not under their direct control. By providing stable states of resources, version control systems allow not only stable pointers into those resources, but also well defined methods to determine the relationships of those states of a resource. WebDAV Versioning defines both basic and advanced versioning functionality. Basic versioning allows authors to: - Put a resource under version control - Determine whether a resource is under version control - Determine whether a resource update will automatically be captured as a new version. - Create and access distinct versions of a resource Advanced versioning provides additional functionality for parallel development and configuration management of sets of web resources. This document will first define the properties and method semantics for the basic versioning features, and then define the additional properties and method semantics for the advanced versioning features. An implementer that is only interested in basic versioning should skip the advanced versioning sections (Section 10 to Section 15). 1.1 Relationship to WebDAV To maximize interoperability and the use of existing protocol functionality, versioning support is designed as extensions to the WebDAV protocol [RFC2518], which itself is an extension to the HTTP protocol [RFC2616]. All method marshalling and postconditions defined by RFC 2518 and RFC 2616 continue to hold, to ensure that versioning unaware clients can interoperate successfully with Clemm, et al. [Page 7] INTERNET-DRAFT WebDAV Versioning April 17, 2001 versioning servers. Although the versioning extensions are designed to be orthogonal to most aspects of the WebDAV and HTTP protocols, a clarification to RFC 2518 is required for effective interoperable versioning. This clarification is described in Section 1.7. 1.2 Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119. The term "protected" is placed in parentheses following the definition of a protected property (see Section 1.4.2). The term "computed" is placed in parentheses following the definition of a computed property (see Section 1.4.3). When an XML element type in the "DAV:" namespace is referenced in this document outside of the context of an XML fragment, the string "DAV:" will be prefixed to the element type. When a precondition or postcondition of a method is defined in this document, the definition can be prefixed by a parenthesized XML element type. If a precondition is violated by a request or a postcondition cannot be satisfied, the XML element of the violated precondition or unsatisfied postcondition will be returned in the response body (see Section 1.5). 1.3 Terms This document uses the terms defined in RFC 2616, in RFC 2518, and in this section. Section 2.2 defines the semantic versioning model underlying this terminology. Version Control, Checked-In, Checked-Out "Version control" is a set of constraints on how a resource can be updated. A resource under version control is either in a "checked- in" or "checked-out" state, and the version control constraints apply only while the resource is in the checked-in state. Versionable Resource A "versionable resource" is a resource that can be put under version control. Version-Controlled Resource When a versionable resource is put under version control, it becomes a "version-controlled resource". A version-controlled Clemm, et al. [Page 8] INTERNET-DRAFT WebDAV Versioning April 17, 2001 resource can be "checked out" to allow modification of its content or dead properties by standard HTTP and WebDAV methods. Checked-Out Resource A "checked-out resource" is a resource under version control that is in the checked-out state. Version Resource A "version resource", or simply "version", is a resource that contains a copy of a particular state (content and dead properties) of a version-controlled resource. A version is created by "checking in" a checked-out resource. The server allocates a distinct new URL for each new version, and this URL will never be used to identify any resource other than that version. The content and dead properties of a version never change. Version History Resource A "version history resource", or simply "version history", is a resource that contains all the versions of a particular version- controlled resource. Version Name A "version name" is a string chosen by the server to distinguish one version of a version history from the other versions of that version history. Versions from different version histories may have the same version name. Predecessor, Successor, Ancestor, Descendant When a version-controlled resource is checked out and then subsequently checked in, the version that was checked out becomes a "predecessor" of the version created by the checkin. A client can specify multiple predecessors for a new version if the new version is logically a merge of those predecessors. When a version is connected to another version by traversing one or more predecessor relations, it is called an "ancestor" of that version. The inverse of the predecessor and ancestor relations are the "successor" and "descendant" relations. Therefore, if X is a predecessor of Y, then Y is a successor of X, and if X is an ancestor of Y, then Y is a descendant of X. Precursor When a version resource is copied, that version is the "precursor" of the new resource created at the destination of the copy. Unlike the predecessor relation, which only tracks the evolution of the versions in a single version history, the precursor relation tracks the evolution of versions from one version history to another. Clemm, et al. [Page 9] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Root Version Resource The "root version resource", or simply "root version", is the version in a version history that is an ancestor of every other version in that version history. Workspace Resource A "workspace resource", or simply "workspace", is a collection that contains at most one version-controlled resource for a given version history (see Section 6). Working Resource A "working resource" is a checked-out resource created by the server at a server-defined URL when a version (instead of a version-controlled resource) is checked out. Unlike a checked-out version-controlled resource, a working resource is a deleted when it is checked in. Fork, Merge When a second successor is added to a version, this creates a "fork" in the version history. When a version is created with multiple predecessors, this creates a "merge" in the version history. A server may restrict the version history to be linear (with no forks or merges), but an interoperable versioning client should be prepared to deal with both forks and merges in the version history. Clemm, et al. [Page 10] INTERNET-DRAFT WebDAV Versioning April 17, 2001 The following diagram illustrates several of the previous definitions. Each box represents a version and each line between two boxes represents a predecessor/successor relationship. For example, it shows V3 is a predecessor of V5, V7 is a successor of V5, V1 is an ancestor of V4, and V7 is a descendant of V4. It also shows that there is a fork at version V2 and a merge at version V7. History of foo.html +---+ Root Version -------> | | V1 +---+ ^ | | | | +---+ | Version Name ----> V2 | | | Ancestor +---+ | / \ | / \ | +---+ +---+ | | V3 | | V4 ^ +---+ +---+ | | | | Predecessor | | | | +---+ +---+ | | | V5 | | V6 | Descendant +---+ +---+ | Successor | \ / | | \ / | v +---+ v | | V7 +---+ Label A "label" is a name that can be used to select a version from a version history. A label can be assigned by either a client or the server. The same label can be used in different version histories. 1.4 Property Values 1.4.1Initial Property Value Unless an initial value of a property of a given type is defined by this document, the initial value of a property of that type is implementation dependent. 1.4.2Protected Property Value When a property of a specific kind of resource is "protected", the property value cannot be updated on that kind of resource except by Clemm, et al. [Page 11] INTERNET-DRAFT WebDAV Versioning April 17, 2001 a method explicitly defined as updating that specific property. In particular, a protected property cannot be updated with a PROPPATCH request. Note that a given property can be protected on one kind of resource, but not protected on another kind of resource. 1.4.3Computed Property Value When a property is "computed", its value is defined in terms of a computation based on the content and other properties of that resource, or even of some other resource. When the semantics of a method is defined in this document, the effect of that method on non-computed properties will be specified; the effect of that method on computed properties will not be specified, but can be inferred from the computation defined for those properties. A computed property is always a protected property. 1.4.4Boolean Property Value Some properties take a Boolean value of either "false" or "true". 1.4.5DAV:href Property Value The DAV:href XML element is defined in RFC 2518, Section 12.3. 1.5 DAV Namespace XML Elements in Request and Response Bodies Although WebDAV request and response bodies can be extended by arbitrary XML elements, which can be ignored by the message recipient, an XML element in the DAV namespace MUST NOT be used in the request or response body of a versioning method unless that XML element is explicitly defined in an IETF RFC. 1.6 Response Bodies for 403 and 409 Status Responses A 403 (Forbidden) status indicates that an error has occurred that the client cannot resolve, and therefore the request should not be resubmitted. A 409 (Conflict) status indicates that an error has occurred that the client can resolve, after which the request could be resubmitted. According to RFC 2616, Section 10.4: "The 4xx class of status code is intended for cases in which the client seems to have erred. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition." In order to allow better client handling of 403 and 409 responses, a distinct XML element type can be associated with each method precondition and postcondition of a request. When a particular precondition is violated or a particular postcondition cannot be Clemm, et al. [Page 12] INTERNET-DRAFT WebDAV Versioning April 17, 2001 satisfied, the appropriate XML element MUST be returned as the child of a top-level DAV:error element in the response body, unless otherwise negotiated by the request. In a 207 Multi-Status response, this element would appear in the appropriate DAV:response-description element. 1.6.1Example - CHECKOUT request with DAV:must-not-be-checked-out response >>REQUEST CHECKOUT /foo.html HTTP/1.1 Host: www.webdav.org >>RESPONSE HTTP/1.1 409 Conflict Content-Type: text/xml; charset="utf-8" Content-Length: xxxx In this example, the request to CHECKOUT /foo.html fails because /foo.html is already checked out. 1.7 Clarification of COPY Semantics with Overwrite:T RFC 2518, Section 8.8.4 states: "If a resource exists at the destination and the Overwrite header is "T" then prior to performing the copy the server MUST perform a DELETE with "Depth: infinity" on the destination resource." The purpose of this sentence is to ensure that following a COPY, all destination resources have the same content and dead properties as the corresponding resources identified by the request-URL (where a resources with a given name relative to the Destination URL "corresponds" to a resource with the same name relative to the request-URL). If at the time of the request, there already is a resource at the destination that has the same resource type as the corresponding resource at the request-URL, that resource MUST NOT be deleted, but MUST be updated to have the content and dead properties of its corresponding member. If a client wishes all resources at the destination to be deleted prior to the COPY, it MUST explicitly issue a DELETE request. The difference between updating a resource and replacing a resource with a new resource is especially important when resource history is being maintained (the former adds to an existing history, while Clemm, et al. [Page 13] INTERNET-DRAFT WebDAV Versioning April 17, 2001 the latter creates a new history). In addition, locking and access control constraints might allow you to update a resource, but not allow you to delete it and create a new one in its place. Note that this clarification does not apply to a MOVE request. A MOVE request with Overwrite:T MUST perform the DELETE with "Depth:infinity" on the destination resource prior to performing the MOVE. 1.8 Versioning Methods and Write Locks If a write-locked resource has a non-computed property defined by this document, the property value MUST NOT be changed by a request unless the appropriate lock token is included in the request. Since every method introduced in this document other than REPORT modifies at least one property defined by this document, every versioning method other than REPORT is affected by a write lock. In particular, the method MUST fail with a 423 (Locked) status if the resource is write-locked and the appropriate token is not specified in an If request header. 2 BASIC VERSIONING FEATURES Each basic versioning feature defines extensions to existing HTTP and WebDAV methods, as well as new resource types, live properties, and methods. 2.1 Basic Versioning Packages Although a server MAY support any combination of versioning features, in order to minimize the complexity of a WebDAV basic versioning client, a WebDAV basic versioning server SHOULD support one of the following three "packages" (feature sets): - Core-Versioning Package: version-control - Basic-Server-Workspace Package: version-control, workspace, version-history, checkout - Basic-Client-Workspace Package: version-control, working- resource, update, label The core-versioning package supports linear versioning by both versioning-aware and versioning-unaware client. A versioning-aware client can use reports and properties to access previous versions of a version-controlled resource. The basic workspace packages support parallel development of version-controlled resources. Each client has its own configuration of the shared version-controlled resources, and can make changes to its configuration without disturbing that of another client. Clemm, et al. [Page 14] INTERNET-DRAFT WebDAV Versioning April 17, 2001 In the basic-server-workspace package, all persistent state is maintained on the server. Each client has its own workspace resource allocated on the server, where each workspace identifies a configuration of the shared version-controlled resources. Each client makes changes to its workspace, and can transfer changes when appropriate from one workspace to another. The server workspace package is appropriate for clients with no local persistent state, or for clients that wish to expose their working configurations to other clients. In the basic-client-workspace package, each client maintains in local persistent storage the state for its configuration of the shared version-controlled resources. When a client is ready to make its changes visible to other clients, it allocates a set of "working resources" on the server, updates the content and dead properties of these working resources, and then uses the set of working resources to update the version-controlled resources. The working resources are used instead of directly updating the version-controlled resources so that sets of consistent updates can be prepared in parallel by multiple clients. Also, a working resource allows a client to prepare a single update that requires multiple server requests (e.g. updating both the content and dead properties of a resource requires both a PUT and a PROPPATCH). The client workspace package simplifies the server implementation by requiring each client to maintain its own namespace, but this requires that the clients have local persistent state, and does not allow clients to expose their working configurations to other clients. A server that supports both basic workspace packages will interoperate with all basic versioning clients. 2.2 Basic Versioning Semantics 2.2.1Creating a Version-Controlled Resource In order to track the history of the content and dead properties of a versionable resource, an author can put the resource under version control with a VERSION-CONTROL request. A VERSION-CONTROL request performs three distinct operations: 1) It creates a new "version history resource". In basic versioning, a version history resource is not assigned a URL, and hence is not visible in the http scheme URL space. However, when the version-history feature (see Section 5) is supported, this changes, and each version history resource is assigned a new distinct and unique server-defined URL. 2) It creates a new "version resource" and adds it to the new version history resource. The body and dead properties of the new version resource are a copy of those of the versionable resource. Clemm, et al. [Page 15] INTERNET-DRAFT WebDAV Versioning April 17, 2001 The server assigns the new version resource a new distinct and unique URL. 3) It converts the versionable resource into a "version-controlled resource". The version-controlled resource continues to be identified by the same URL that identified it as a versionable resource. As part of this conversion, it adds a DAV:checked-in property, whose value contains the URL of the new version resource. Note that a versionable resource and a version-controlled resource are not new types of resources (i.e. they introduce no new DAV:resourcetype), but rather are any type of resource that supports the methods and live properties defined for them in this document, in addition to all the methods and live properties implied by their DAV:resourcetype. For example, a collection (whose DAV:resourcetype is DAV:collection) is a versionable resource if it supports the VERSION-CONTROL method, and is a version-controlled resource if it supports the version-controlled resource methods and live properties. In the following example, foo.html is a versionable resource that is put under version control. After the VERSION-CONTROL request succeeds, there are two additional resources: a new version history resource and a new version resource in that version history. The versionable resource is converted into a version-controlled resource, whose DAV:checked-in property identifies the new version resource. The content and dead properties of a resource are represented by the symbol appearing inside the box for that resource (e.g. "S1" in the following example). ===VERSION-CONTROL==> | +----+ version | version- | | history versionable | controlled +----+ resource resource | resource | /foo.html | /foo.html | | v +----+ | +----+ checked-in +----+ version | S1 | | | S1 |----------->| S1 | resource +----+ | +----+ +----+ /his/73/ver/1 Thus, whereas before the VERSION-CONTROL request there was only one, non-version-controlled resource, after VERSION-CONTROL there are three separate, distinct resources, each containing its own state and properties: the version-controlled resource, the version resource, and the version history resource. Since the version- controlled resource and the version resource are separate, distinct resources, when a method is applied to a version-controlled resource, it is only applied to that version-controlled resource, and is not applied to the version resource that is currently identified by the DAV:checked-in property of that version- controlled resource. Although the content and dead properties of a checked-in version-controlled resource are required to be the same Clemm, et al. [Page 16] INTERNET-DRAFT WebDAV Versioning April 17, 2001 as those of its current DAV:checked-in version, its live properties may differ. An implementation may optimize storage by retrieving the content and dead properties of a checked-in version-controlled resource from its current DAV:checked-in version rather than storing them in the version-controlled resource, but this is just an implementation optimization. Normally, a resource is placed under version control with an explicit VERSION-CONTROL request. A server MAY automatically place every new versionable resource under version control. In this case, the resulting state on the server MUST be the same as if the client had explicitly applied a VERSION-CONTROL request to the versionable resource. In order to remove a resource from version control, a client can COPY the version-controlled resource to a temporary location, DELETE the version-controlled resource, and then MOVE the copy from the temporary location back to the original URL. The versions created for that resource while it was under version control will continue to exist at their server-defined locations. 2.2.2Modifying a Version-Controlled Resource In order to use methods like PUT and PROPPATCH to directly modify the content or dead properties of a version-controlled resource, the version-controlled resource must first be checked out. When the checked-out resource is checked in, a new version is created in the version history of that version-controlled resource. The version that was checked out is remembered as the predecessor of the new version. The DAV:auto-checkout and DAV:auto-checkin properties (see Sections 3.2.2 and 3.2.3) of a checked-in version-controlled resource determines how it responds to a method that attempts to modify its content or dead properties. Possible responses include: - Fail the request. The resource requires an explicit CHECKOUT request for it to be modified (see Sections 4 and 9.5). - Automatically checkout the resource, perform the modification, and automatically checkin the resource. This ensures that every state of the resource is tracked by the server, but can result in an excessive number of versions being created. - Fail the request unless the resource is write-locked. If it is write-locked, automatically checkout the resource and perform the modification. The resource remains checked-out until the write- lock is removed (either explicitly through a subsequent UNLOCK request or implicitly through a time-out of the write-lock). This avoids the proliferation of versions that can result if every modification creates a new version. Clemm, et al. [Page 17] INTERNET-DRAFT WebDAV Versioning April 17, 2001 - Automatically checkout the resource, perform the modification, and then if the resource is not write-locked, automatically checkin the resource. If the resource is write-locked, it remains checked- out until the write-lock is removed. This helps a locking client avoid the proliferation of versions, while still allowing a non- locking client to update the resource. - Automatically checkout the resource, perform the modification, and then leave the resource checked out. An explicit CHECKIN operation is used to create a new version. This minimizes the number of new versions that will be created by a versioning unaware client, but only a versioning aware client can create new versions. The following diagram illustrates the effect of the checkout/checkin process on a version-controlled resource and its version history. The symbol inside a box (S1, S2, S3) represents the current content and dead properties of the resource represented by that box. The symbol next to a box (V1, V2, V3) represents the URL for that resource. ===checkout==> ===PUT==> ===checkin==> /foo.html (version-controlled resource) +----+ | +----+ | +----+ | +----+ | S2 | | | S2 | | | S3 | | | S3 | +----+ | +----+ | +----+ | +----+ Checked-In=V2|Checked-Out=V2|Checked-Out=V2|Checked-In=V3 /his/73 (version history for /foo.html) +----+ | +----+ | +----+ | +----+ | S1 | V1 | | S1 | V1 | | S1 | V1 | | S1 | V1 +----+ | +----+ | +----+ | +----+ | | | | | | | | | | | | | | +----+ | +----+ | +----+ | +----+ | S2 | V2 | | S2 | V2 | | S2 | V2 | | S2 | V2 +----+ | +----+ | +----+ | +----+ | | | | | | | | | | | +----+ | | | | S3 | V3 | | | +----+ Note that a version captures only a defined subset of the state of a resource. In particular, a version of a basic resource captures its content and dead properties, but not its live properties. Clemm, et al. [Page 18] INTERNET-DRAFT WebDAV Versioning April 17, 2001 2.2.3Reporting Some versioning information about a resource requires that parameters be specified along with that request for information. Included in basic versioning is the required support for an extensible reporting mechanism, which includes a REPORT method as well as a live property for determining what reports are supported by a particular resource. The REPORT method is required by versioning, but it can be used in non-versioning WebDAV extensions. To allow a client to query the properties of all versions in the version history of a specified version-controlled resource, basic versioning provides the DAV:version-tree report (see Section 3.7). In advanced versioning, a more powerful version history reporting mechanism is provided by applying the DAV:expand-property report (see Section 15.1) to a version history resource (see Section 5). 3 VERSION-CONTROL FEATURE A server indicates that it supports the version-control feature by including the string "version-control" as a field in the DAV header in the response to an OPTIONS request. The version-control feature MUST be supported if any other versioning feature is supported. 3.1 Additional Resource Properties The version-control feature introduces the following REQUIRED properties for any WebDAV resource. 3.1.1DAV:comment This property is used to track a brief comment about a resource that is suitable for presentation to a user. The DAV:comment of a version can be used to indicate why that version was created. PCDATA value: string 3.1.2DAV:creator-displayname This property contains a description of the creator of the resource that is suitable for presentation to a user. The DAV:creator- displayname of a version can be used to indicate who created that version. PCDATA value: string Clemm, et al. [Page 19] INTERNET-DRAFT WebDAV Versioning April 17, 2001 3.1.3DAV:supported-method-set (protected) This property identifies the methods that are supported by the resource. name value: a method name 3.1.4DAV:supported-live-property-set (protected) This property identifies the live properties that are supported by the resource. name value: a property element type namespace value: an XML namespace 3.1.5DAV:supported-report-set (protected) This property identifies the reports that are supported by the resource. name value: a property element type namespace value: an XML namespace 3.2 Version-Controlled Resource Properties The version-control feature introduces the following REQUIRED properties for a version-controlled resource. 3.2.1DAV:checked-in (protected) This property appears on a checked-in version-controlled resource, and identifies a version that has the same content and dead properties as the version-controlled resource. This property is removed when the resource is checked out, and then added back (identifying a new version) when the resource is checked back in. Clemm, et al. [Page 20] INTERNET-DRAFT WebDAV Versioning April 17, 2001 3.2.2DAV:auto-checkout When a modification request (such as PUT/PROPPATCH) is applied to a checked-in version-controlled resource, if the resource is non- write-locked and the DAV:auto-checkout property is DAV:unlocked- update, or if the resource is write-locked and the DAV:auto- checkout property is DAV:locked-update, the request is automatically preceded by a checkout operation. A server MAY refuse to allow the value of the DAV:auto-checkout property to be modified. ANY value: A sequence of elements with at most one DAV:unlocked- update element and at most one DAV:locked-update element. 3.2.3DAV:auto-checkin When a modification request (such as PUT/PROPPATCH) on a checked-in version-controlled resource has been automatically preceded by a checkout operation, if the resource is non-write-locked and the DAV:auto-checkin property is DAV:unlocked-update, or if the resource is write-locked and the DAV:auto-checkin property is DAV:locked-update, the request is automatically followed by a checkin operation. If a write-locked version-controlled resource was automatically checked out because the DAV:auto-checkout property was DAV:locked- update, and if the resource was still checked-out when the write lock is removed (such as from an UNLOCK or lock timeout), then the removal of the write lock is automatically preceded by a checkin operation. A server MAY refuse to allow the value of the DAV:auto-checkin property to be modified. ANY value: A sequence of elements with at most one DAV:unlocked- update element and at most one DAV:locked-update element. 3.3 Checked-Out Resource Properties The version-control feature introduces the following REQUIRED properties for a checked-out resource. Clemm, et al. [Page 21] INTERNET-DRAFT WebDAV Versioning April 17, 2001 3.3.1DAV:checked-out (protected) This property identifies the version that was identified by the DAV:checked-in property at the time the resource was checked out. When the resource is checked in, this property is removed. 3.3.2DAV:predecessor-set This property determines the DAV:predecessor-set property of the version that results from checking in this resource. A server MAY reject attempts to modify the DAV:predecessor-set of a version-controlled resource. 3.3.3DAV:precursor-set This property determines the DAV:precursor-set property of the version that results from checking in this resource. 3.4 Version Properties The version-control feature introduces the following REQUIRED properties for a version. 3.4.1DAV:predecessor-set (protected) This property identifies each predecessor of this version. Except for the root version, which has no predecessors, each version has at least one predecessor. 3.4.2DAV:successor-set (computed) This property identifies each version whose DAV:predecessor-set identifies this version. 3.4.3DAV:checkout-set (computed) This property identifies each checked-out resource whose DAV:checked-out property identifies this version. Clemm, et al. [Page 22] INTERNET-DRAFT WebDAV Versioning April 17, 2001 3.4.4DAV:version-name (protected) This property contains a server-defined string that is different for each version in a given version history. This string is intended for display to a user, unlike the URL of a version, which is normally only used by a client and not displayed to a user. PCDATA value: string 3.4.5DAV:precursor-set (protected) This property identifies each version from a different version history that was copied or merged into the checked-out resource that created this version. 3.5 VERSION-CONTROL Method A VERSION-CONTROL request can be used to create a version- controlled resource at the request-URL. It can be applied to a versionable resource or to a version-controlled resource. If the request-URL identifies a versionable resource, a new version history resource is created, a new version is created whose content and dead properties are those of the versionable resource, and the resource is given a DAV:checked-in property that is initialized to identify this new version. If the request-URL identifies a version-controlled resource, the resource just remains under version-control. This allows a client to be unaware of whether or not a server automatically puts a resource under version control when it is created. If a VERSION-CONTROL request fails, the server state preceding the request MUST be restored. Marshalling: If a request body is included, it MUST be a DAV:version-control XML element. The response MUST include a Cache-Control:no-cache header. Postconditions: (DAV:put-under-version-control): If the request-URL identified a non-null versionable resource at the time of the request, a new version history is created and a new version resource is created in the new version history. The resource MUST have a DAV:checked-in property that identifies the new version. The content, dead Clemm, et al. [Page 23] INTERNET-DRAFT WebDAV Versioning April 17, 2001 properties, and DAV:resourcetype of the new version MUST be the same as those of the resource. Note that an implementation can choose to locate the version history and version resources anywhere that it wishes. In particular, it could locate them on the same host and server as the version-controlled resource, on a different virtual host maintained by the same server, on the same host maintained by a different server, or on a different host maintained by a different server. (DAV:must-not-change-existing-checked-in-out): If the request-URL identified a resource already under version control at the time of the request, the VERSION-CONTROL request MUST NOT change the DAV:checked-in or DAV:checked-out property of that version- controlled resource. 3.5.1Example - VERSION-CONTROL >>REQUEST VERSION-CONTROL /foo.html HTTP/1.1 Host: www.webdav.org Content-Length: 0 >>RESPONSE HTTP/1.1 200 OK Cache-Control: no-cache In this example, /foo.html is put under version control. A new version history is created for it, and a new version is created that has a copy of the content and dead properties of /foo.html. The DAV:checked-in property of /foo.html identifies this new version. 3.6 REPORT Method A REPORT request is an extensible mechanism for obtaining information about a resource. Unlike a resource property, which has a single value, the value of a report can depend on additional information specified in the REPORT request body and in the REPORT request headers. Marshalling: The body of a REPORT request specifies which report is being requested, as well as any additional information that will be used to customize the report. The request MAY include a Depth header. The response body for a successful request MUST contain the requested report. Clemm, et al. [Page 24] INTERNET-DRAFT WebDAV Versioning April 17, 2001 If a Depth request header is included, the response MUST be a 207 Multi-Status. Postconditions: The REPORT method MUST NOT change the content or dead properties of any resource. If a Depth request header is included, the request MUST be applied separately to the collection itself and to all members of the collection that satisfy the Depth value. The DAV:prop element of a DAV:response for a given resource MUST contain the requested report for that resource. 3.7 DAV:version-tree REPORT The DAV:version-tree REPORT describes the requested properties of all the versions in the version history of a version. If the report is requested for a version-controlled resource, it is redirected to its DAV:checked-in or DAV:checked-out version. Marshalling: The request body MUST be a DAV:version-tree XML element. ANY value: a sequence of zero or more elements, with at most one DAV:prop element. prop: see RFC 2518, Section 12.11 The response body for a successful request MUST be a DAV:multistatus XML element. multistatus: see RFC 2518, Section 12.9 The response body for a successful DAV:version-tree REPORT request MUST contain a DAV:response element for each version in the version history of the version identified by the request-URL. Clemm, et al. [Page 25] INTERNET-DRAFT WebDAV Versioning April 17, 2001 3.7.1Example - DAV:version-tree REPORT The version history drawn below would produce the following version tree report. foo.html History +---+ | | V1 +---+ / \ / \ +---+ +---+ | | V2 | | V2.1.1 +---+ +---+ >>REQUEST REPORT /foo.html HTTP/1.1 Host: www.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: xxxx >>RESPONSE HTTP/1.1 207 Multi-Status Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://repo.webdav.org/his/23/ver/V1 V1 Fred http://repo.webdav.org/his/23/ver/V2 http://repo.webdav.org/his/23/ver/V2.1.1 Clemm, et al. [Page 26] INTERNET-DRAFT WebDAV Versioning April 17, 2001 HTTP/1.1 200 OK http://repo.webdav.org/his/23/ver/V2 V2 Fred HTTP/1.1 200 OK http://repo.webdav.org/his/23/ver/V2.1.1 V2.1.1 Sally HTTP/1.1 200 OK 3.8 Additional OPTIONS Semantics If the server supports the version-control feature, it MUST include "version-control" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 3.9 Additional PUT Semantics Additional Preconditions: (DAV:cannot-modify-version-controlled-content): If the request-URL identifies a resource with a DAV:checked-in property, the request MUST fail unless the DAV:auto-checkout property of the resource is DAV:unlocked-update and the resource is not write-locked, or the DAV:auto-checkout property is DAV:locked-update and the resource is write-locked. (DAV:cannot-modify-version): If the request-URL identifies a version, the request MUST fail. If the request creates a new resource that is automatically placed under version control, all preconditions for VERSION-CONTROL apply to the request. Clemm, et al. [Page 27] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Additional Postconditions: (DAV:auto-checkout): If the resource was a checked-in version- controlled resource whose DAV:auto-checkout property indicates it should be automatically checked out for a modification request, but whose DAV:auto-checkin property does not indicate it should be automatically checked in after a modification request, then the resource MUST have been automatically checked out prior to executing the request. In particular, the value of the DAV:checked-out property of the resource MUST be that of the DAV:checked-in property prior to the request, the DAV:checked-in property MUST be empty, and the DAV:predecessor-set property MUST be initialized to be the same as the DAV:checked-out property. If any part of the checkout/update sequence failed, the status from the failed part of the request MUST be returned, and the server state preceding the request sequence MUST be restored. (DAV:auto-version): If the resource was a checked-in version- controlled resource whose DAV:auto-checkout property indicates it should be automatically checked out for a modification request, and whose DAV:auto-checkin property indicates it should be automatically checked in after a modification request, then the resource MUST have been automatically checked out prior to executing the request and automatically checked in after the request. In particular, the DAV:checked-in property of the resource MUST identify a new version whose content and dead properties are the same as those of the resource. The DAV:predecessor-set of the new version MUST identify the version identified by the DAV:checked-in property prior to the request. If any part of the checkout/update/checkin sequence failed, the status from the failed part of the request MUST be returned, and the server state preceding the request sequence MUST be restored. If the request creates a new resource, the new resource MAY have automatically been placed under version control, and all postconditions for VERSION-CONTROL apply to the request. 3.10Additional PROPFIND Semantics A DAV:allprop PROPFIND request SHOULD NOT return any of the properties defined by this document. This allows a versioning server to perform efficiently when a naive client, which does not understand the cost of asking a server to compute all possible live properties, issues a DAV:allprop PROPFIND request. 3.11Additional PROPPATCH Semantics Additional Preconditions: (DAV:cannot-modify-version-controlled-property): If the request attempts to modify a dead property, same semantics as PUT (see Section 3.9). Clemm, et al. [Page 28] INTERNET-DRAFT WebDAV Versioning April 17, 2001 (DAV:cannot-modify-version): If the request attempts to modify a dead property, same semantics as PUT (see Section 3.9). (DAV:cannot-modify-protected-property): An attempt to modify a property defined by this document as being protected for that kind of resource MUST fail. (DAV:cannot-modify-unsupported-property): An attempt to modify a property defined by this document whose semantics are not enforced by the server MUST fail. This helps ensure that a client will be notified when it is trying to use a property whose semantics are not supported by the server. Additional Postconditions: (DAV:auto-checkout): If the request modified a dead property, same semantics as PUT (see Section 3.9). (DAV:auto-version): If the request modified a dead property, same semantics as PUT (see Section 3.9). 3.12Additional DELETE Semantics Additional Preconditions: (DAV:cannot-delete-referenced-version): A version that is identified in a DAV:checked-in or DAV:checked-out property MUST NOT be deleted. (DAV:no-version-delete): An implementation MAY fail an attempt to DELETE a version. Additional Postconditions: (DAV:update-predecessor-set): If a version is deleted, any reference to that version in a DAV:predecessor-set MUST be replaced by a copy of the DAV:predecessor-set of the deleted version. (DAV:must-be-root-version): If the root version of a version history is deleted, there MUST be another version that is the new root version, i.e. that is the ancestor of all other versions in the version history. 3.13Additional COPY Semantics Additional Preconditions: If the request creates a new resource that is automatically placed under version control, all preconditions for VERSION-CONTROL apply to the request. Clemm, et al. [Page 29] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Additional Postconditions: (DAV:must-not-copy-versioning-property): A property defined by this document MUST NOT have been copied to the new resource created by this request, but instead that property of the new resource MUST have the default initial value it would have had if the new resource had been created by a non-versioning method such as PUT or a MKCOL. (DAV:initialize-precursor): If the source of the COPY was a version and if the destination of the COPY supports the DAV:precursor-set property, the DAV:precursor-set of the destination MUST identify that version. If the source of the COPY was a version-controlled resource, the DAV:precursor-set MUST identify the DAV:checked-in or DAV:checked-out version of that resource. (DAV:auto-checkout): If the destination is a version-controlled resource, same semantics as PUT (see Section 3.9). (DAV:auto-version): Same semantics as PUT (see Section 3.9). The result of copying a version-controlled resource or a version is a new non-version-controlled resource at the destination of the COPY. The new resource MAY automatically be put under version control, but the resulting version-controlled resource MUST be associated with a new version history created for that new version- controlled resource, and all postconditions for VERSION-CONTROL apply to the request. 3.14Additional MOVE Semantics Additional Preconditions: (DAV:cannot-rename-resource): If the request-URL identifies a version, the request MUST fail. Additional Postconditions: (DAV:preserve-versioning-properties): When a resource is moved from a source URL to a destination URL, a property defined by this document MUST have the same value at the destination URL as it had at the source URL. 3.15Additional UNLOCK Semantics Additional Preconditions: (DAV:version-history-is-tree): If the request-URL identifies a version-controlled resource that was automatically checked out because its DAV:auto-checkout property was DAV:locked-update, then the versions identified by the DAV:predecessor-set of the checked- Clemm, et al. [Page 30] INTERNET-DRAFT WebDAV Versioning April 17, 2001 out resource MUST be descendants of the root version of the version history for the DAV:checked-out version. Additional Postconditions: (DAV:create-version): If the request-URL identified a version- controlled resource that was automatically checked out because its DAV:auto-checkout property was DAV:locked-update, a new version MUST have been created in the version history of the DAV:checked- out version. The server MUST allocate a URL for the version that MUST NOT have previously identified any other resource, and MUST NOT ever identify a resource other than this version. The content, dead properties, DAV:resourcetype, and DAV:predecessor-set of the new version MUST be those of the checked-out resource. The DAV:version-name of the new version MUST be set to a server-defined value distinct from all other DAV:version-name values of other versions in the version history of that version. The DAV:checked- out property of the version-controlled resource MUST have been removed, and a DAV:checked-in property that identifies the new version MUST have been added. 4 CHECKOUT FEATURE With the version-control feature, WebDAV locking can be used to avoid the proliferation of versions that would result if every modification to a version-controlled resource produced a new version. The checkout feature provides an alternative mechanism that does not require the client to maintain any local state (such as a lock token). Instead, a CHECKOUT method is provided for checking out a version-controlled resource, which makes the version-controlled resource a checked-out resource. Also, a CHECKIN method is provided for creating a new version by checking in a checked-out resource, and an UNCHECKOUT method is provided for canceling a checkout and returning the version-controlled resource to its state before the checkout. 4.1 Additional Version Properties The checkout feature introduces the following REQUIRED properties for a version. 4.1.1DAV:checkout-fork This property controls the behavior of CHECKOUT when a version already is checked out or has a successor. If the DAV:checkout- fork of a version is DAV:forbidden, a CHECKOUT request MUST fail if it would result in that version appearing in the DAV:predecessor- set or DAV:checked-out property of more than one version or checked-out resource. If DAV:checkout-fork is DAV:discouraged, such a CHECKOUT request MUST fail unless DAV:fork-ok is specified in the CHECKOUT request body. Clemm, et al. [Page 31] INTERNET-DRAFT WebDAV Versioning April 17, 2001 A server MAY reject attempts to modify the DAV:checkout-fork of a version. ANY value: A sequence of elements with at most one DAV:ok, DAV:discouraged, or DAV:forbidden element. 4.1.2DAV:checkin-fork This property controls the behavior of CHECKIN when a version already has a successor. If the DAV:checkin-fork of a version is DAV:forbidden, a CHECKIN request MUST fail if it would result in that version appearing in the DAV:predecessor-set of more than one version. If DAV:checkin-fork is DAV:discouraged, such a CHECKIN request MUST fail unless DAV:fork-ok is specified in the CHECKIN request body. A server MAY reject attempts to modify the DAV:checkout-fork of a version. ANY value: A sequence of elements with at most one DAV:ok, DAV:discouraged, or DAV:forbidden element. 4.2 CHECKOUT Method A CHECKOUT request can be applied to a checked-in version- controlled resource to allow modifications to the content and dead properties of that version-controlled resource. If a CHECKOUT request fails, the server state preceding the request MUST be restored. Marshalling: If a request body is included, it MUST be a DAV:checkout XML element. ANY value: A sequence of elements with at most one DAV:fork-ok element. The response MUST include a Cache-Control:no-cache header. Clemm, et al. [Page 32] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Preconditions: (DAV:must-be-checked-in): If a version-controlled resource is being checked out, it MUST have a DAV:checked-in property value. (DAV:checkout-of-version-with-descendant-is-forbidden): If the DAV:checkout-fork property of the version being checked out is DAV:forbidden, the request MUST fail if a version identifies that version in its DAV:predecessor-set. (DAV:checkout-of-version-with-descendant-is-discouraged): If the DAV:checkout-fork property of the version being checked out is DAV:discouraged, the request MUST fail if a version identifies that version in its DAV:predecessor-set unless DAV:fork-ok is specified in the request body. (DAV:checkout-of-checked-out-version-is-forbidden): If the DAV:checkout-fork property of the version being checked out is DAV:forbidden, the request MUST fail if a checked-out resource identifies that version in its DAV:checked-out property. (DAV:checkout-of-checked-out-version-is-discouraged): If the DAV:checkout-fork property of the version being checked out is DAV:discouraged, the request MUST fail if a checked-out resource identifies that version in its DAV:checked-out property unless DAV:fork-ok is specified in the request body. Postconditions: (DAV:is-checked-out): The checked-out resource MUST have a DAV:checked-out property that identifies the DAV:checked-in version preceding the checkout. The version-controlled resource MUST NOT have a DAV:checked-in property value. (DAV:initialize-predecessor-set): The DAV:predecessor-set property of the checked-out resource MUST be initialized to be the DAV:checked-out version. 4.2.1Example - CHECKOUT of a version-controlled resource >>REQUEST CHECKOUT /foo.html HTTP/1.1 Host: www.webdav.org Content-Length: 0 >>RESPONSE HTTP/1.1 200 OK Cache-Control: no-cache In this example, the version-controlled resource /foo.html is checked out. Clemm, et al. [Page 33] INTERNET-DRAFT WebDAV Versioning April 17, 2001 4.3 CHECKIN Method A CHECKIN request can be applied to a checked-out version- controlled resource to produce a new version whose content and dead properties are those of the checked-out resource. If a CHECKIN request fails, the server state preceding the request MUST be restored. Marshalling: If a request body is included, it MUST be a DAV:checkin XML element. ANY value: A sequence of elements with at most one DAV:keep- checked-out element and at most one DAV:fork-ok element. The response for a successful request MUST include a Location header. The response MUST include a Cache-Control:no-cache header. Preconditions: (DAV:must-be-checked-out): The request-URL MUST identify a resource with a DAV:checked-out property. (DAV:version-history-is-tree) The versions identified by the DAV:predecessor-set of the checked-out resource MUST be descendants of the root version of the version history for the DAV:checked-out version. (DAV:checkin-fork-forbidden): A CHECKIN request MUST fail if it would cause a version whose DAV:checkin-fork is DAV:forbidden to appear in the DAV:predecessor-set of more than one version. (DAV:checkin-fork-discouraged): A CHECKIN request MUST fail if it would cause a version whose DAV:checkin-fork is DAV:discouraged to appear in the DAV:predecessor-set of more than one version, unless DAV:fork-ok is specified in the request body. Postconditions: (DAV:create-version): A new version MUST have been created in the version history of the DAV:checked-out version. The server MUST allocate a distinct new URL for the new version, and that URL MUST NOT ever identify any resource other than that version. The URL for the new version MUST be returned in a Location response header. Clemm, et al. [Page 34] INTERNET-DRAFT WebDAV Versioning April 17, 2001 (DAV:initialize-version-content-and-properties): The content, dead properties, DAV:resourcetype, DAV:predecessor-set, and DAV:precursor-set of the new version MUST be those of the checked- out resource. The DAV:version-name of the new version MUST be set to a server-defined value distinct from all other DAV:version-name values of other versions in the version history of that version. (DAV:checked-in): If the request-URL identifies a version- controlled resource and DAV:keep-checked-out is not specified in the request body, the DAV:checked-out property of the version- controlled resource MUST have been removed and a DAV:checked-in property that identifies the new version MUST have been added. (DAV:keep-checked-out): If DAV:keep-checked-out is specified in the request body, the DAV:checked-out property of the checked-out resource MUST have been updated to identify the new version. 4.3.1Example - CHECKIN >>REQUEST CHECKIN /foo.html HTTP/1.1 Host: www.webdav.org Content-Length: 0 >>RESPONSE HTTP/1.1 201 Created Location: http://repo.webdav.org/his/23/ver/32 Cache-Control: no-cache In this example, version-controlled resource /foo.html is checked in, and a new version is created at http://repo.webdav.org/his/23/ver/32. 4.4 UNCHECKOUT Method An UNCHECKOUT request can be applied to a checked-out version- controlled resource to cancel the CHECKOUT and restore the pre- CHECKOUT state of the version-controlled resource. Note that an UNCHECKOUT cannot be applied to a working resource (a CHECKOUT that created a working resource is canceled by just deleting that working resource). If an UNCHECKOUT request fails, the server state preceding the request MUST be restored. Marshalling: If a request body is included, it MUST be a DAV:uncheckout XML element. Clemm, et al. [Page 35] INTERNET-DRAFT WebDAV Versioning April 17, 2001 The response MUST include a Cache-Control:no-cache header. Preconditions: (DAV:must-be-checked-out-version-controlled-resource): The request- URL MUST identify a version-controlled resource with a DAV:checked- out property. Postconditions: (DAV:cancel-checked-out): The value of the DAV:checked-in property is that of the DAV:checked-out property prior to the request, and the DAV:checked-out property no longer is set. (DAV:restore-content-and-dead-properties): The content and dead properties of the version-controlled resource are those of its DAV:checked-in version. 4.4.1Example - UNCHECKOUT >>REQUEST UNCHECKOUT /foo.html HTTP/1.1 Host: www.webdav.org Content-Length: 0 >>RESPONSE HTTP/1.1 200 OK Cache-Control: no-cache In this example, the content and dead properties of the version- controlled resource identified by http://www.webdav.org/foo.html are restored to their values preceding the most recent CHECKOUT of that version-controlled resource. 4.5 Additional OPTIONS Semantics If a server supports the checkout feature, it MUST include "checkout" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 5 VERSION-HISTORY FEATURE It is often useful to have access to a version history even after all version-controlled resources for that version history have been deleted. A server can provide this functionality by supporting version history resources. A version history resource exists in a Clemm, et al. [Page 36] INTERNET-DRAFT WebDAV Versioning April 17, 2001 server defined namespace and therefore is unaffected by any deletion or movement of version-controlled resources. A version history resource is an appropriate place to add a property that logically applies to all states of a resource. The DAV:expand- property report (see Section 15.1) can be applied to the DAV:version-set of a version history resource to provide a variety of useful reports on all versions in that version history. 5.1 Version History Properties The DAV:resourcetype of a version history MUST be DAV:version- history. The version-history feature introduces the following REQUIRED properties for a version history. 5.1.1DAV:version-set (protected) This property identifies each version of this version history. 5.1.2DAV:root-version (computed) This property identifies the root version of this version history. 5.2 Additional Version-Controlled Resource Properties The version-history feature introduces the following REQUIRED property for a version-controlled resource. 5.2.1DAV:version-history (computed) This property identifies the version history resource for the DAV:checked-in or DAV:checked-out version of this version- controlled resource. 5.3 Additional Version Properties The version-history feature introduces the following REQUIRED property for a version. 5.3.1DAV:version-history (computed) This property identifies the version history that contains this version. Clemm, et al. [Page 37] INTERNET-DRAFT WebDAV Versioning April 17, 2001 5.4 DAV:locate-history REPORT Many properties identify a version from some version history. It is often useful to be able to efficiently locate a version- controlled resource for that version history. The DAV:locate- history REPORT can be applied to a collection to locate the collection member that is a version-controlled resource for a specified version history resource. Marshalling: The request body MUST be a DAV:locate-history XML element. prop: see RFC 2518, Section 12.11 The response body for a successful request MUST be a DAV:multistatus XML element containing every version-controlled resource that is a member of the collection identified by the request-URL, and whose DAV:version-history property identifies one of the version history resources identified by the request body. The DAV:prop element in the request body identifies which properties should be reported in the DAV:prop elements in the response body. Preconditions: (DAV:must-be-version-history): Each member of the DAV:version- history-set element in the request body MUST identify a version history resource. 5.4.1Example - DAV:locate-history REPORT >>REQUEST REPORT /ws/public HTTP/1.1 Host: www.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://repo.webdav.org/his/23 http://repo.webdav.org/his/84 http://repo.webdav.org/his/129 Clemm, et al. [Page 38] INTERNET-DRAFT WebDAV Versioning April 17, 2001 >>RESPONSE HTTP/1.1 207 OK Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://www.webdav.org/ws/public/x/test.html http://repo.webdav.org/his/23 HTTP/1.1 200 OK In this example, there is only one version-controlled member of /ws/public that is a version-controlled resource for one of the three specified version history resources. In particular, /ws/public/x/test.html is the version-controlled resource for http://repo.webdav.org/his/23. 5.5 Additional OPTIONS Semantics If the server supports the version-history feature, it MUST include "version-history" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. A DAV:version-history-collection-set element MAY be included in the request body to identify collections that may contain version history resources. Additional Marshalling: If an XML request body is included, it MUST be a DAV:options XML element. ANY value: A sequence of elements with at most one DAV:version- history-collection-set element. If an XML response body for a successful request is included, it MUST be a DAV:options-response XML element. Clemm, et al. [Page 39] INTERNET-DRAFT WebDAV Versioning April 17, 2001 ANY value: A sequence of elements with at most one DAV:version- history-collection-set element. If DAV:version-history-collection-set is included in the request body, the response body for a successful request MUST contain a DAV:version-history-collection-set element identifying collections that may contain version histories. An identified collection MAY be the root collection of a tree of collections, all of which may contain version histories. Since different servers can control different parts of the URL namespace, different resources on the same host MAY have different DAV:version-history-collection-set values. The identified collections MAY be located on different hosts from the resource. 5.6 Additional DELETE Semantics Additional Postconditions: (DAV:delete-version-set): If a version history is deleted, all versions in the DAV:version-set of that version history MUST be deleted. (DAV:must-be-root-version): If the root version of a version history is deleted, the DAV:root-version of the version history MUST be updated to refer to another version that is an ancestor of all other versions in that version history. 5.7 Additional COPY Semantics Additional Preconditions: (DAV:cannot-copy-history): If the request-URL identifies a version history, the request MUST fail. In order to create another version history whose versions have the same content and dead properties, the appropriate sequence of VERSION-CONTROL, CHECKOUT, PUT, PROPPATCH, and CHECKIN requests must be made. 5.8 Additional MOVE Semantics Additional Preconditions: (DAV:cannot-rename-resource): If the request-URL identifies a version history, the request MUST fail. Clemm, et al. [Page 40] INTERNET-DRAFT WebDAV Versioning April 17, 2001 5.9 Additional VERSION-CONTROL Semantics Additional Postconditions: (DAV:new-version-history): If the request resulted in the creation of a new version history, the server MUST allocate a new server- defined URL for that version history that MUST NOT have previously identified any other resource, and MUST NOT ever identify a resource other than this version history. 5.10Additional CHECKIN Semantics Additional Postconditions: (DAV:add-to-history): A URL for the new version resource MUST have been added to the DAV:version-set of the version history of the DAV:checked-out version. 6 WORKSPACE FEATURE In order to allow multiple users to work concurrently on adding versions to the same version history, it is necessary to allocate on the server multiple checked-out resources for the same version history. Even if only one user is making changes to a resource, that user will sometimes wish to create a "private" version, and then to expose that version at an appropriate later time. One way to provide this functionality depends on the client keeping track of its current set of checked-out resources. This is the working- resource feature defined in Section 8. The other way to provide this functionality avoids the need for persistent state on the client, and instead has the server maintain a human meaningful namespace for related sets of checked-out resources. This is the workspace feature defined in this section. The workspace feature introduces a "workspace resource". A workspace resource is a collection whose members are related version-controlled and non-version-controlled resources. In order to concurrently expose different versions and configurations of a set of version-controlled resources, multiple workspaces may be used. In order to make a change made to a version-controlled resource in one workspace visible in another workspace, that version-controlled resource must be checked in, and then the corresponding version-controlled resource in the other workspace can be updated to display the content and dead properties of the new version. In order to ensure unambiguous merging (see Section 7) and baselining (see Section 12) semantics, a workspace may contain at most one version-controlled resource for a given version history. This is required for unambiguous merging because the MERGE method must identify which version-controlled resource is to be the merge target of a given version. This is required for unambiguous Clemm, et al. [Page 41] INTERNET-DRAFT WebDAV Versioning April 17, 2001 baselining because a baseline can only select one version for a given version-controlled resource. Initially, an empty workspace can be created. Non-version- controlled resources can then be added to the workspace with standard WebDAV requests such as PUT and MKCOL. Version-controlled resources can be added to the workspace with VERSION-CONTROL requests. If the baseline feature is supported, collections in the workspace can be placed under baseline control, and then initialized by existing baselines. 6.1 Workspace Properties The workspace feature introduces the following REQUIRED property for a workspace. 6.1.1DAV:workspace-checkout-set (computed) This property identifies each checked-out resource whose DAV:workspace property identifies this workspace. 6.2 Additional Resource Properties The workspace feature introduces the following OPTIONAL property for a WebDAV resource. 6.2.1DAV:workspace (protected) If the resource is associated with a workspace, this property MUST identify this workspace. The DAV:workspace property of a workspace MUST identify that workspace. The DAV:workspace property of any other type of resource MUST be the same as the DAV:workspace of its parent collection. 6.3 MKWORKSPACE Method A MKWORKSPACE request creates a new workspace resource. A server MAY restrict workspace creation to particular collections, but a client can determine the location of these collections from a DAV:workspace-collection-set OPTIONS request. If a MKWORKSPACE request fails, the server state preceding the request MUST be restored. Clemm, et al. [Page 42] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Marshalling: If a request body is included, it MUST be a DAV:mkworkspace XML element. The response MUST include a Cache-Control:no-cache header. Preconditions: (DAV:resource-must-be-null): A resource MUST NOT exist at the request-URL. (DAV:workspace-location-ok): The request-URL MUST identify a location where a workspace can be created. Postconditions: (DAV:initialize-workspace): A new workspace exists at the request- URL. The DAV:resourcetype of the workspace MUST be DAV:collection. The DAV:workspace of the workspace MUST identify the workspace. 6.3.1Example - MKWORKSPACE >>REQUEST MKWORKSPACE /ws/public HTTP/1.1 Host: www.webdav.org Content-Length: 0 >>RESPONSE HTTP/1.1 201 Created Cache-Control: no-cache In this example, a new workspace is created at http://www.webdav.org/ws/public. 6.4 Additional OPTIONS Semantics If a server supports the workspace feature, it MUST include "workspace" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. If a server supports the workspace feature, it MUST also support the checkout feature and the version-history feature. A DAV:workspace-collection-set element MAY be included in the request body to identify collections that may contain workspace resources. Clemm, et al. [Page 43] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Additional Marshalling: If an XML request body is included, it MUST be a DAV:options XML element. ANY value: A sequence of elements with at most one DAV:workspace- collection-set element. If an XML response body for a successful request is included, it MUST be a DAV:options-response XML element. ANY value: A sequence of elements with at most one DAV:workspace- collection-set element. If DAV:workspace-collection-set is included in the request body, the response body for a successful request MUST contain a DAV:workspace-collection-set element identifying collections that may contain workspaces. An identified collection MAY be the root collection of a tree of collections, all of which may contain workspaces. Since different servers can control different parts of the URL namespace, different resources on the same host MAY have different DAV:workspace-collection-set values. The identified collections MAY be located on different hosts from the resource. 6.5 Additional DELETE Semantics Additional Postconditions: (DAV:delete-workspace-members): If a workspace is deleted, any resource that identifies that workspace in its DAV:workspace property MUST be deleted. 6.6 Additional MOVE Semantics Additional Postconditions: (DAV:workspace-member-moved): If the request-URL did not identify a workspace, the DAV:workspace of the destination MUST have been updated to have the same value as the DAV:workspace of the parent collection of the destination. (DAV:workspace-moved): If the request-URL identified a workspace, any reference to that workspace in a DAV:workspace property MUST have been updated to refer to the new location of that workspace. Clemm, et al. [Page 44] INTERNET-DRAFT WebDAV Versioning April 17, 2001 6.7 Additional VERSION-CONTROL Semantics A VERSION-CONTROL request can be used to create a new version- controlled resource for an existing version history. This allows the creation of version-controlled resources for the same version history in multiple workspaces. Additional Marshalling: ANY value: A sequence of elements with at most one DAV:version element. Additional Preconditions: (DAV:cannot-add-to-existing-history): If the request-URL identifies a versionable resource or a version-controlled resource, the DAV:version-control request body element MUST NOT contain a DAV:version element. (DAV:must-be-version): The DAV:href of the DAV:version element MUST identify a version. (DAV:one-version-controlled-resource-per-history-per-workspace): If the DAV:version-control request body specifies a version, and if the request-URL is a member of a workspace, then there MUST NOT already be a version-controlled member of that workspace whose DAV:checked-in or DAV:checked-out property identifies any version from the version history of the version specified in the request body. Additional Postconditions: (DAV:new-version-controlled-resource): If the request-URL identified a null resource, a new version-controlled resource exists at the request-URL whose content and dead properties are initialized by those of the version in the request body, and whose DAV:checked-in property identifies that version. 6.7.1Example - VERSION-CONTROL (using an existing version history) >>REQUEST VERSION-CONTROL /ws/public/bar.html HTTP/1.1 Host: www.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: xxxx Clemm, et al. [Page 45] INTERNET-DRAFT WebDAV Versioning April 17, 2001 http://repo.webdav.org/his/12/ver/V3 >>RESPONSE HTTP/1.1 201 Created Cache-Control: no-cache In this example, the null resource /ws/public/bar.html is put under version control, and the content and dead properties of the new version-controlled resource are initialized to be the same as those of the version identified by http://repo.webdav.org/his/12/ver/V3. 7 UPDATE FEATURE The update feature provides a mechanism for restoring a previous state of the version-controlled resource. 7.1 UPDATE Method The UPDATE method modifies the content and dead properties of a checked-in version-controlled resource to be those of a specified version from the version history of that version-controlled resource. Marshalling: The request-URL MUST identify the resource to be updated. The request body MUST be a DAV:update element. ANY value: A sequence of elements with at most one DAV:version element. The response MUST include a Cache-Control:no-cache header. Preconditions: (DAV:must-be-checked-in-version-controlled-resource): The request- URL MUST identify a checked-in version-controlled resource. (DAV:must-select-version-in-same-history): The DAV:version element in the request body MUST identify a version in the same version history as the DAV:checked-in version of the version-controlled resource identified by the request-URL. Clemm, et al. [Page 46] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Postconditions: (DAV:update-content-and-dead-properties): The content and dead properties of the version-controlled resource MUST be the same as those of the version specified by the DAV:version element in the request body. (DAV:update-checked-in-property): The DAV:checked-in property of the version-controlled resource MUST contain the value of the DAV:version element in the request body. 7.1.1Example - UPDATE >>REQUEST UPDATE /foo.html HTTP/1.1 Host: www.webdav.org Content-type: text/xml; charset="utf-8" Content-Length: xxxx http://repo.webdav.org/his/23/ver/33 >>RESPONSE HTTP/1.1 200 OK Cache-Control: no-cache In this example, the content and dead properties of http://repo.webdav.org/his/23/ver/33 are copied to the version- controlled resource /foo.html, and the DAV:checked-in property of /foo.html is updated to refer to http://repo.webdav.org/his/23/ver/33. 7.2 Additional OPTIONS Semantics If the server supports the update feature, it MUST include "update" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 8 LABEL FEATURE A version "label" is a string that distinguishes one version of a version history from all other versions of that version history. A label can automatically be assigned by a server, or it can be assigned by a client in order to provide a meaningful name for that Clemm, et al. [Page 47] INTERNET-DRAFT WebDAV Versioning April 17, 2001 version. A given version label can be assigned to at most one version of a given version history, but client assigned labels can be reassigned to another version at any time. Note that although a given label can be applied to at most one version from the same version history, the same label can be applied to versions from different version histories. For certain methods, if the request-URL identifies a version- controlled resource, a label can be specified in a Label request header (see Section Error! Reference source not found.) to cause the method to be applied to the version selected by that label from the version history of that version-controlled resource. Note that it is hard for a distributed versioning server to support labels. In order to ensure that a label does not get assigned to multiple versions of the same version history, only one server could assign labels to a given version history. Otherwise, two temporarily disconnected servers that have copies of a version history could assign the same label to different versions of that version history, resulting in two versions in that version history with the same label when the two servers are synchronized. 8.1 Additional Version Properties The label feature introduces the following REQUIRED property for a version. 8.1.1DAV:label-name-set (protected) This property contains the labels that currently select this version. PCDATA value: string 8.2 LABEL Method A LABEL request can be applied to a version to modify the labels that select that version. The case of a label name MUST be preserved when it is stored and retrieved. When comparing two label names to decide if they match or not, a server SHOULD use a case-sensitive octet-by-octet comparison of the two label names. If a LABEL request is applied to a version-controlled resource, the operation MUST be applied to the DAV:checked-in version of that version-controlled resource. Marshalling: The request body MUST be a DAV:label element. Clemm, et al. [Page 48] INTERNET-DRAFT WebDAV Versioning April 17, 2001 ANY value: A sequence of elements with at most one DAV:add, DAV:set, or DAV:remove element. PCDATA value: string The request MAY include a Label header. The request MAY include a Depth header. Standard depth semantics apply, and the request is applied to the collection identified by the request-URL and to all members of the collection that satisfy the Depth value. If a Depth header is included and the request fails on any resource, the response MUST be a 207 Multi-Status that identifies all resources for which the request has failed. The response MUST include a Cache-Control:no-cache header. Preconditions: (DAV:must-not-be-checked-out): If the request-URL identifies a version-controlled resource, the version-controlled resource MUST NOT be checked out. (DAV:must-select-version-in-history): If a Label request header is included and the request-URL identifies a version-controlled resource, the specified label MUST select a version in the version history of the version-controlled resource. (DAV:must-be-new-label): If DAV:add is specified in the request body, the specified label MUST NOT currently select a version of the version history of that version-controlled resource. (DAV:label-must-exist): If DAV:remove is specified in the request body, the specified label MUST select that version. Postconditions: (DAV:add-label): If DAV:add or DAV:set is specified in the request body, the specified label selects the version. (DAV:remove-label): If DAV:remove is specified in the request body, the specified label no longer selects any version of the version history of the version-controlled resource. 8.2.1Example - Setting a label >>REQUEST LABEL /foo.html HTTP/1.1 Clemm, et al. [Page 49] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Host: www.webdav.org Content-type: text/xml; charset="utf-8" Content-Length: xxxx default >>RESPONSE HTTP/1.1 200 OK Cache-Control: no-cache In this example, the label "default" is applied to the DAV:checked- in version of /foo.html. 8.3 Label Header For certain methods (e.g. GET, PROPFIND), if the request-URL identifies a version-controlled resource, a label can be specified in a Label request header to cause the method to be applied to the version selected by that label from the version history of that version-controlled resource. The value of a label header is the name of a label. For example, the label "release-2.0" is identified by the following header: Label: release-2.0 A Label header MUST have no effect on a request whose request-URL does not identify a version-controlled resource. In particular, it MUST have no effect on a request whose request-URL identifies a version or a version history. A server MUST return an HTTP-1.1 Vary header containing Label in a successful response to a cacheable request (e.g. GET, PROPFIND) that includes a Label header. 8.4 Additional OPTIONS Semantics If the server supports the label feature, it MUST include "label" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 8.5 Additional GET Semantics Additional Marshalling: The request MAY include a Label header. Clemm, et al. [Page 50] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Additional Preconditions: (DAV:must-select-version-in-history): If a Label request header is included and the request-URL identifies a version-controlled resource, the specified label MUST select a version in the version history of the version-controlled resource. Additional Postconditions: If the request-URL identifies a version-controlled resource and a Label request header is included, the response MUST contain the content of the specified version rather than that of the version- controlled resource. 8.6 Additional PROPFIND Semantics Additional Marshalling: The request MAY include a Label header. Additional Preconditions: (DAV:must-select-version-in-history): If a Label request header is included and the request-URL identifies a version-controlled resource, the specified label MUST select a version in the version history of the version-controlled resource. Additional Postconditions: If the request-URL identifies a version-controlled resource and a Label request header is included, the response MUST contain the properties of the specified version rather than that of the version-controlled resource. 8.7 Additional COPY Semantics Additional Marshalling: The request MAY include a Label header. Additional Preconditions: (DAV:must-select-version-in-history): If a Label request header is included and the request-URL identifies a version-controlled resource, the specified label MUST select a version in the version history of the version-controlled resource. Additional Postconditions: If the request-URL identifies a version-controlled resource and a Label request header is included, the request MUST have copied the Clemm, et al. [Page 51] INTERNET-DRAFT WebDAV Versioning April 17, 2001 properties and content of the specified version rather than that of the version-controlled resource. 8.8 Additional CHECKOUT Semantics If the server supports the working-resource option, a LABEL header may be included to check out the version selected by the specified label. Additional Marshalling: The request MAY include a Label header. Additional Preconditions: (DAV:must-select-version-in-history): If a Label request header is included and the request-URL identifies a version-controlled resource, the specified label MUST select a version in the version history of the version-controlled resource. (DAV:must-not-have-label-and-apply-to-version): If a Label request header is included, the request body MUST NOT contain a DAV:apply- to-version element. Additional Postconditions: If the request-URL identifies a version-controlled resource, and a Label request header is included, the CHECKOUT MUST have been applied to the version selected by the specified label, and not to the version-controlled resource itself. A new working resource MUST have been created and the version-controlled resource MUST remain checked in. 8.9 Additional UPDATE Semantics A label can be specified to update the content and dead properties of the version-controlled resource to be those of the version selected by the specified label from the version history of the version-controlled resource identified. Additional Marshalling: ANY value: A sequence of elements with at most one DAV:label-name or DAV:version element (but not both). PCDATA value: string The request MAY include a Depth header. Clemm, et al. [Page 52] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Additional Preconditions: (DAV:must-select-version-in-history): If the request includes a DAV:label-name element in the request body, the label MUST select a version in the version history of the version-controlled resource identified by the request-URL. (DAV:depth-update): If the request includes a Depth header, standard depth semantics apply, and the request is applied to the collection identified by the request-URL and to all members of the collection that satisfy the Depth value. The request MUST be applied to a collection before being applied to any members of that collection, since an update of a version-controlled collection might change the membership of that collection. Additional Postconditions: If a Label request header is included, the content and dead properties of the version-controlled resource are updated to be those of the version selected by that label. 9 WORKING-RESOURCE FEATURE The working-resource feature provides an alternative to the workspace feature for supporting parallel development. Unlike the workspace feature, where the desired configuration of versions and checked-out resources is maintained on the server, the working- resource feature maintains the configuration on the client. This simplifies the server implementation, but does not allow a user to access the configuration from clients in different physical locations, such as from another office, from home, or while traveling. Another difference is that the workspace feature isolates clients from a logical change that involves renaming shared resources, until that logical change is complete and tested; with the working resource feature, all clients use a common set of shared version-controlled resources and every client sees the result of a MOVE as soon as it occurs. If a server supports the working-resource feature but not the checkout feature, a CHECKOUT request can only be used to create a working resource, and cannot be used to check out a version- controlled resource. If a server supports the checkout feature, but not the working-resource feature, a CHECKOUT can only be used to change the state of a version-controlled resource from checked- in to checked-out. 9.1 Working Resource Properties A working resource is a checked-out resource, and therefore has all the properties defined in this document for a checked-out resource. Clemm, et al. [Page 53] INTERNET-DRAFT WebDAV Versioning April 17, 2001 9.2 Additional OPTIONS Semantics If the server supports the working-resource feature, it MUST include "working-resource" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 9.3 Additional COPY Semantics Additional Postconditions: The result of copying a working resource is a new non-version- controlled resource at the destination of the COPY. The new resource MAY automatically be put under version control, but the resulting version-controlled resource MUST be associated with a new version history created for that new version-controlled resource. 9.4 Additional MOVE Semantics Additional Preconditions: (DAV:cannot-rename-resource): If the request-URL identifies a working resource, the request MUST fail. 9.5 Additional CHECKOUT Semantics A CHECKOUT request can be applied to a version to create a new working resource. The content and dead properties of the working resource are a copy of the version that was checked out. Additional Marshalling: ANY value: A sequence of elements with at most one DAV:apply-to- version element. The response MAY include a Location header. Additional Postconditions: (DAV:create-working-resource): If the request-URL identified a version, the Location response header MUST contain the URL of a new working resource. The DAV:checked-out property of the new working resource MUST identify the version that was checked out. The content and dead properties of the working resource MUST be the same as the content and dead properties of the DAV:checked-out version. Clemm, et al. [Page 54] INTERNET-DRAFT WebDAV Versioning April 17, 2001 (DAV:create-working-resource-from-checked-in-version): If the request-URL identified a version-controlled resource, and DAV:apply-to-version is specified in the request body, the CHECKOUT is applied to the DAV:checked-in version of the version-controlled resource, and not the version-controlled resource itself. A new working resource is created and the version-controlled resource remains checked-in. 9.5.1Example - CHECKOUT of a version >>REQUEST CHECKOUT /his/12/ver/V3 HTTP/1.1 Host: repo.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: 0 >>RESPONSE HTTP/1.1 201 Created Location: http://repo.webdav.org/wr/157 Cache-Control: no-cache In this example, the version identified by http://repo.webdav.org/his/12/ver/V3 is checked out, and the new working resource is located at http://repo.webdav.org/wr/157. 9.6 Additional CHECKIN Semantics A CHECKIN request can be applied to a working resource to produce a new version whose content and dead properties are a copy of those of the working resource. Note that checking in a working resource does not change the content or dead properties of any version- controlled resource, therefore an UPDATE or MERGE request must be used to update a version-controlled resource with the content and dead properties of a version created by checking in a working resource. Additional Postconditions: (DAV:delete-working-resource): If the request-URL identifies a working resource and if DAV:keep-checked-out is not specified in the request body, the working resource is deleted. 9.6.1Example - CHECKIN of a working resource >>REQUEST CHECKIN /wr/157 HTTP/1.1 Host: repo.webdav.org Content-Length: 0 Clemm, et al. [Page 55] INTERNET-DRAFT WebDAV Versioning April 17, 2001 >>RESPONSE HTTP/1.1 201 Created Location: http://repo.webdav.org/his/23/ver/15 Cache-Control: no-cache In this example, the working resource /wr/157 checked in, and a new version is created at http://repo.webdav.org/his/23/ver/15. 10 ADVANCED VERSIONING FEATURES 10.1Rationale Advanced versioning addresses the problems of parallel development and configuration management of multiple sets of interrelated resources. Traditionally, artifacts of software development, including requirements, design documents, code, and test cases, have been a focus of configuration management. Web sites, comprising multiple inter-linked resources (HTML, graphics, sound, CGI, and others), are another class of complex information artifacts that benefit from the application of configuration management. The advanced versioning capabilities for coordinating concurrent change provide the infrastructure for efficient and controlled management of large evolving web sites. 10.2Advanced Versioning Terms The following additional terms are used by the advanced versioning features. Collection A "collection" is a resource whose state consists of not only content and properties, but also a set of named "bindings", where a binding identifies what RFC 2518 calls an "internal member" of the collection. Note that a binding is not a resource, but rather is a part of the state of a collection that defines a mapping from a binding name (a URL segment) to a resource (an internal member of the collection). Collection Version Resource A "collection version resource", or simply "collection version", captures the content, dead properties, and version-controlled bindings of a version-controlled collection (see Section 14). A version-controlled binding is a binding to a version-controlled resource. Clemm, et al. [Page 56] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Configuration A "configuration" is a set of resources that consists of a root collection and all members (not just internal members) of that root collection that are not members of another configuration. The root collection is called the "configuration root", and the members of this set are called the "members of the configuration". Note that a collection (which is a single resource) is very different from a configuration (which is a set of resources). Baseline Resource A "baseline resource", or simply "baseline", of a collection is a version of the configuration that is rooted at that collection (see Section 12). In particular, a baseline captures the DAV:checked-in version of every version-controlled member of that configuration. Note that a collection version (which captures the state of a single resource) is very different from a collection baseline (which captures the state of a set of resources). Baseline-Controlled Collection A "baseline-controlled collection" is a collection from which baselines can be created (see Section 12). Version-Controlled Configuration Resource A "version-controlled configuration resource", or simply "version- controlled configuration", is a special kind of version-controlled resource that is associated with a baseline-controlled collection, and is used to create and access baselines of that collection (see Section 12). When a collection is both version-controlled and baseline-controlled, a client can create a new version of the collection by checking out and checking in that collection, while it can create a new baseline of that collection by checking out and checking in the version-controlled configuration of that collection. Activity Resource An "activity resource", or simply "activity", is a non-versionable resource that selects a set of versions that correspond to a single logical change, where the versions selected from a given version history form a single line of descent through that version history (see Section 13). 10.3Advanced Versioning Packages Although a server MAY support any combination of advanced versioning features, in order to minimize the complexity of a WebDAV advanced versioning client, a WebDAV advanced versioning server SHOULD support one of the following packages: Clemm, et al. [Page 57] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Advanced-Server-Workspace Package: Basic-Server-Workspace package plus all advanced features Advanced-Client-Workspace Package: Basic-Client-Workspace Package plus all advanced features The advanced-server-workspace package supports advanced versioning capabilities for a client with no persistent state. The advanced- client-workspace package supports advanced versioning capabilities for a client that maintains configuration state on the client. A server that supports both advanced workspace packages will interoperate with all versioning clients. 11 MERGE FEATURE When an author wants to accept the changes (new versions) created by someone else, it is important not to just update the version- controlled resources in the author's workspace with those new versions, since this could result in "backing out" changes the author has made to those version-controlled resources. Instead, the versions created in another workspace should be "merged" into the author's version-controlled resources. The version history of a version-controlled resource provides the information needed to determine what should be the result of the merge. In particular, the merge should select whichever version is later in the line of descent from the root version. In case the versions to be merged are on different lines of descent (neither version is a descendant of the other), neither version should be selected, but instead, a new version should be created that contains the logical merge of the content and dead properties of those versions. The MERGE request can be used to check out each version-controlled resource with such a conflict, and set the DAV:merge-set property of each checked-out resource to identify the version to be merged. The author is responsible for modifying the content and dead properties of the checked-out resource so that it represents the logical merge of that version, and then adding that version to the DAV:predecessor-set of the checked-out resource. If the server is capable of automatically performing the merge, it MAY update the content, dead properties, and DAV:predecessor-set of the checked-out resource itself. Before checking in the automatically merged resource, the author is responsible for verifying that the automatic merge is correct. 11.1Additional Checked-Out Resource Properties The merge feature introduces the following REQUIRED properties for a checked-out resource. Clemm, et al. [Page 58] INTERNET-DRAFT WebDAV Versioning April 17, 2001 11.1.1 DAV:merge-set This property identifies each version that is to be merged into this checked-out resource. 11.1.2 DAV:auto-merge-set This property of identifies each version that the server has merged into this checked-out resource. The client should confirm that the merge has been performed correctly before moving a URL from the DAV:auto-merge-set to the DAV:predecessor-set of a checked-out resource. 11.2MERGE Method The MERGE method performs a logical merge of a specified version into a specified version-controlled resource. If the specified version is neither an ancestor nor a descendant of the DAV:checked- in or DAV:checked-out version of the version-controlled resource, the MERGE checks out the version-controlled resource (if it is not already checked out) and adds the URL of the specified version to the DAV:merge-set of the version-controlled resource. It is then the client's responsibility to update the content and dead properties of the checked-out resource so that it reflects the logical merge of the specified version into the current state of the version-controlled resource. The client indicates that it has completed the update of the version-controlled resource, by deleting the version URL from the DAV:merge-set of the checked-out resource, and adding it to the DAV:predecessor-set. As an error check for a client forgetting to complete a merge, the server MUST fail an attempt to CHECKIN a version-controlled resource with a non-empty DAV:merge-set. When a server has the ability to automatically update the content and dead properties of the version-controlled resource to reflect the logical merge of the specified version, it may do so unless DAV:no-auto-merge is specified in the MERGE request body. In order to notify the client that a version has been automatically merged, the MERGE request MUST add the URL of the auto-merged version to the DAV:auto-merge-set property of the version-controlled resource, and not to the DAV:merge-set property. The client indicates that it has verified that the auto-merge is valid, by deleting the version URL from the DAV:auto-merge-set, and adding it to the DAV:predecessor-set. In general, a MERGE request identifies a "merge source" that specifies a set of versions (the "merge versions") and a "merge destination" that specifies a set of version-controlled resources (the "merge targets"). The set of merge versions is determined as follows: Clemm, et al. [Page 59] INTERNET-DRAFT WebDAV Versioning April 17, 2001 - If the merge source is a version, that version is the merge version. - If the merge source is a version-controlled resource, the DAV:checked-in version of that version-controlled resource is the merge version. - If the merge source is a collection, the DAV:checked-in version of each version-controlled resource in that collection (as well as the DAV:checked-in version of the collection if it is version- controlled) is a merge version. For each merge version, the server determines the "merge target" for that merge version. The merge target is the member of the merge destination that is a version-controlled resource whose DAV:checked-in or DAV:checked-out version is from the same version history as the merge version. If a merge version has no merge target, that merge version is reported by the MERGE as having been ignored. Marshalling: The merge destination is identified by the request-URL. The merge source is identified by the DAV:source element in the request body. The request body MUST be a DAV:merge element. ANY value: A sequence of elements with one DAV:source element, at most one DAV:no-auto-merge element, at most one DAV:no-checkout element, at most one DAV:prop element, and any legal set of elements that can occur in a DAV:checkout element. prop: see RFC 2518, Section 12.11 The response body for a successful request MUST be a DAV:merge- response element. ANY value: A sequence of elements with at most one DAV:updated-set element, at most one DAV:merged-set element, and at most one DAV:ignored-set element. response: see RFC 2518, Section 12.9.1 The response MUST include a Cache-Control:no-cache header. Clemm, et al. [Page 60] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Preconditions: (DAV:cannot-merge-checked-out-resource): The DAV:source element MUST NOT identify a checked-out resource. If the DAV:source element identifies a collection, the collection MUST NOT have a member that is a checked-out resource. The checkouts performed to resolve conflicts MUST NOT violate any of the pre-conditions of the CHECKOUT operation. (DAV:checkout-not-allowed): If DAV:no-checkout is specified in the request body, it MUST be possible to perform the merge without checking out any of the merge targets. Postconditions: (DAV:ancestor-version): If the merge target is a version-controlled resource whose DAV:checked-in version or DAV:checked-out version is a descendant of the merge version, the merge target MUST NOT have been modified by the MERGE. (DAV:descendant-version): If the merge target was a checked-in version-controlled resource whose DAV:checked-in version was an ancestor of the merge version, an UPDATE request MUST have been applied to the merge target to set its content and dead properties to be those of the merge version, and the merge target MUST appear in the DAV:updated-set XML element in the response body. If the UPDATE method is not supported, the merge target MUST have been checked out, the content and dead properties of the merge target MUST have been set to those of the merge version, the merge version MUST have been added to the DAV:auto-merge-set of the merge target, and the merge target MUST appear in the DAV:merged-set. (DAV:checked-out-for-merge): If the merge target was a checked-in version-controlled resource whose DAV:checked-in version was neither a descendant nor an ancestor of the merge version, a CHECKOUT MUST have been applied to the merge target. All XML elements in the DAV:merge XML element that could appear in a DAV:checkout XML element MUST have been used as arguments to the CHECKOUT request. (DAV:update-merge-set): If the merge target was checked out by the MERGE (or was already checked out before the MERGE), and if the DAV:checked-out version of the merge target is not a descendant of the merge version, the merge version MUST be added to either the DAV:merge-set or the DAV:auto-merge-set of the merge target, and the merge target MUST appear in the DAV:merged-set element in the response body. If a merge version has been added to the DAV:auto- merge-set, the content and dead properties of the merge target MUST have been modified by the server to reflect the result of a logical merge of the merge version and the merge target. If a merge version has been added to the DAV:merge-set, the content and dead properties of the merge target MUST NOT have been modified by the Clemm, et al. [Page 61] INTERNET-DRAFT WebDAV Versioning April 17, 2001 server. If DAV:no-auto-merge is specified in the request body, the merge version MUST NOT have been added to the DAV:auto-merge-set. (DAV:report-ignored-set): If a merge version has no merge target, a URL for the merge version MUST appear in the DAV:ignored-set. (DAV:report-properties): If DAV:prop is specified in the request body, the properties specified in the DAV:prop element MUST be reported in the DAV:response elements in the DAV:updated-set and DAV:merged-set. 11.2.1 Example - MERGE >>REQUEST MERGE /ws/public HTTP/1.1 Host: www.webdav.org Content-type: text/xml; charset="utf-8" Content-Length: xxxx http://www.webdav.org/ws/dev/sally >>RESPONSE HTTP/1.1 200 OK Content-Type: text/xml; charset="utf-8" Content-Length: xxxx Cache-Control: no-cache http://www.webdav.org/ws/public/src/parse.c http://www.webdav.org/ws/public/doc/parse.html http://repo.webdav.org/his/23/ver/42 In this example, the DAV:checked-in versions from the workspace http://www.webdav.org/ws/dev/sally are merged into the version- controlled resources in the workspace Clemm, et al. [Page 62] INTERNET-DRAFT WebDAV Versioning April 17, 2001 http://www.webdav.org/ws/public. Two resources in the workspace were updated, and one version was ignored. 11.3DAV:merge-preview REPORT A merge preview describes the changes that would result if the versions specified by the DAV:source element in the request body were to be merged into the resource identified by the request-URL (commonly, a collection). Marshalling: The request body MUST be a DAV:merge-preview XML element. The response body for a successful request MUST be a DAV:merge- preview-response XML element. A DAV:update-preview element identifies a merge target whose DAV:checked-in property would change as a result of the MERGE, and identifies the merge version for that merge target. A DAV:conflict element identifies a merge target that requires a merge. A DAV:common-ancestor element identifies the version that is a common ancestor of both the merge version and the DAV:checked-in or DAV:checked-out version of the merge target. A DAV:ignored-preview element identifies a version that has no merge target and therefore would be ignored by the merge. 11.3.1 Example - DAV:merge-preview REPORT >>REQUEST REPORT /ws/public HTTP/1.1 Clemm, et al. [Page 63] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Host: www.webdav.org Content-type: text/xml; charset="utf-8" Content-Length: xxxx http://www.webdav.org/ws/dev/fred >>RESPONSE HTTP/1.1 200 OK Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://www.webdav.org/ws/public/foo.html http://repo.webdav.org/his/23/ver/18 http://repo.webdav.org/his/23/ver/42 http://www.webdav.org/ws/public/bar.html http://www.repo/his/42/ver/3 In this example, the merge preview report indicates that version /his/23/ver/42 would be merged in /ws/public/foo.html, and version /his/42/ver/3 would update /ws/public/bar.html if the workspace http://www.webdav.org/ws/dev/fred was merged into the workspace http://www.webdav.org/ws/public. 11.4Additional OPTIONS Semantics If the server supports the merge feature, it MUST include "merge" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. Clemm, et al. [Page 64] INTERNET-DRAFT WebDAV Versioning April 17, 2001 11.5Additional DELETE Semantics Additional Postconditions: (DAV:delete-version-reference): If a version is deleted, any reference to that version in a DAV:merge-set or DAV:auto-merge-set property MUST be removed. 11.6Additional CHECKIN Semantics Additional Preconditions: (DAV:merge-must-be-complete): The DAV:merge-set and DAV:auto-merge- set of the checked-out resource MUST be empty. 12 BASELINE FEATURE A "configuration" is a set of resources that consists of a root collection and all members of that root collection that are not members of another configuration. A configuration that contains a large number of resources can consume a large amount of space on a server. This can make it prohibitively expensive to remember the state of an existing configuration by creating a copy of its root collection. A "baseline" is a special kind of version resource that captures the state of the version-controlled members of a configuration. In particular, it captures the DAV:checked-in version of each version- controlled resource that is a member of the root collection, as well as the DAV:checked-in version of the collection if the collection itself is a version-controlled resource. A "baseline history" is a special kind of version history whose versions are baselines. New baselines are created by checking out and then checking in a special kind of version-controlled resource called a "version-controlled configuration". A collection that is under baseline control is called a "baseline- controlled collection". In order to allow efficient baseline implementation, the state of a baseline of a collection is limited to be a set of versions and their names relative to the collection, and the operations on a baseline are limited to the creation of a baseline from a collection, and restoring or merging the baseline back into a collection. A server MAY automatically put a collection under baseline control when it is created, or a client can use the BASELINE-CONTROL method to put a specified collection under baseline control. As a configuration gets large, it is often useful to break it up into a set of smaller configurations that form the logical "components" of that configuration. In order to capture the fact that a baseline of a configuration is logically extended by a Clemm, et al. [Page 65] INTERNET-DRAFT WebDAV Versioning April 17, 2001 component configuration baseline, the component configuration baseline is captured as a "subbaseline" of the baseline. The root directory of a configuration is unconstrained with respect to its relationship to the root collection of any of its components. In particular, the root directory of a configuration can be an ancestor of a root directory of one of its components (e.g. configuration /sys/x can have a component /sys/x/foo), a descendant (e.g. configuration /sys/y/z can have a component /sys/y), or neither (e.g. configuration /sys/x can have a component /comp/bar). 12.1Version-Controlled Configuration Properties Since a version-controlled configuration is a version-controlled resource, it has all the properties of a version-controlled resource. In addition, the baseline feature introduces the following REQUIRED property for a version-controlled configuration. 12.1.1 DAV:baseline-controlled-collection (protected) This property identifies the collection that contains the version- controlled resources whose DAV:checked-in versions are being tracked by this version-controlled configuration. The DAV:version- controlled-configuration of the DAV:baseline-controlled-collection of a version-controlled configuration MUST identify that version- controlled configuration. 12.2Checked-Out Configuration Properties Since a checked-out configuration is a checked-out resource, it has all the properties of a checked-out resource. In addition, the baseline feature introduces the following REQUIRED property for a checked-out configuration. 12.2.1 DAV:subbaseline-set This property determines the DAV:subbaseline-set property of the baseline that results from checking in this resource. A server MAY reject attempts to modify the DAV:subbaseline-set of a checked-out configuration. 12.3Baseline Properties The DAV:resourcetype of a baseline MUST be DAV:baseline. Since a baseline is a version resource, it has all the properties of a Clemm, et al. [Page 66] INTERNET-DRAFT WebDAV Versioning April 17, 2001 version resource. In addition, the baseline feature introduces the following REQUIRED properties for a baseline. 12.3.1 DAV:baseline-collection (protected) This property contains a server-defined URL for a collection of checked-in version-controlled resources, where each member of this collection has the same DAV:checked-in version and relative name as a member of the baseline-controlled collection at the time the baseline was created. At most one member of this collection can have a DAV:checked-in version from a given version history. 12.3.2 DAV:subbaseline-set (protected) The URLs in the DAV:subbaseline-set property MUST identify a set of other baselines. The subbaselines of a baseline are the baselines identified by its DAV:subbaseline-set and all subbaselines of the baselines identified by its DAV:subbaseline-set. 12.4Additional Resource Properties The baseline feature introduces the following OPTIONAL property for a resource. 12.4.1 DAV:version-controlled-configuration (computed) If the resource is a member of a version-controlled configuration (i.e. the resource is a collection under baseline control or is a member of a collection under baseline control), this property identifies that version-controlled configuration. 12.5Additional Workspace Properties The baseline feature introduces the following REQUIRED property for a workspace. 12.5.1 DAV:baseline-controlled-collection-set (computed) This property identifies each member of the workspace that is a collection under baseline control (as well as the workspace itself, if it is under baseline control). Clemm, et al. [Page 67] INTERNET-DRAFT WebDAV Versioning April 17, 2001 12.6BASELINE-CONTROL Method A collection can be placed under baseline control with a BASELINE- CONTROL request. When a collection is placed under baseline control, the DAV:version-controlled-configuration property of the collection is set to identify a new version-controlled configuration. This version-controlled configuration can be checked out and then checked in to create a new baseline for that collection. If a baseline is specified in the request body, the DAV:checked-in version of the new version-controlled configuration will be that baseline, and the collection is initialized to contain version- controlled members whose DAV:checked-in versions and relative names are determined by the specified baseline. If no baseline is specified, a new baseline history is created, and the DAV:checked-in version of the version-controlled configuration will be the (empty) root baseline of that baseline history. Marshalling: If a request body is included, it MUST be a DAV:baseline-control XML element. ANY value: A sequence of elements with at most one DAV:baseline element. Preconditions: (DAV:version-controlled-configuration-must-be-empty): The DAV:version-controlled-configuration property of the collection identified by the request-URL MUST be empty. (DAV:must-be-baseline): The DAV:href of the DAV:baseline element in the request body MUST identify a baseline. (DAV:must-have-no-version-controlled-members): If a DAV:baseline element is specified in the request body, the collection identified by the request-URL MUST have no members. (DAV:one-baseline-controlled-collection-per-history-per-workspace): If the request-URL identifies a workspace or a member of a workspace, and if the DAV:baseline element in the request body identifies a baseline history, then there MUST NOT be another collection in that workspace whose DAV:version-controlled- configuration property identifies a version-controlled configuration for that baseline history. Clemm, et al. [Page 68] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Postconditions: (DAV:create-version-controlled-configuration): A new version- controlled configuration is created, whose DAV:baseline-controlled- collection property identifies the collection. (DAV:reference-version-controlled-configuration): The DAV:version- controlled-configuration of the collection identifies the new version-controlled configuration. (DAV:select-existing-baseline): If the request body specifies a baseline, the DAV:checked-in property of the new version-controlled configuration MUST have been set to identify this baseline. A version-controlled member of the collection will be created for each version in the baseline, where the version-controlled member will have the content and dead properties of that version, and will have the same name relative to the collection as the corresponding version-controlled resource had when the baseline was created. Any nested collections that are needed to provide the appropriate name for a version-controlled member will be created. (DAV:create-empty-baseline): If no baseline is specified in the request body, a new baseline history MUST have been created at a server-defined URL. The DAV:baseline-collection of the root baseline of the new baseline history MUST identify a collection with no members. The DAV:checked-in property of the new version- controlled configuration MUST identify the root baseline of the new baseline history. 12.6.1 Example - BASELINE-CONTROL >>REQUEST BASELINE-CONTROL /src HTTP/1.1 Host: www.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://repo.webdav.org/bl-his/22/bl/17 >>RESPONSE HTTP/1.1 200 OK In this example, the collection identified by http://www.webdav.org/src is placed under baseline control and is initialized with version-controlled members whose DAV:checked-in versions are those selected by the baseline identified by http://repo.webdav.org/bl-his/22/bl/17. Clemm, et al. [Page 69] INTERNET-DRAFT WebDAV Versioning April 17, 2001 12.7DAV:compare-baseline REPORT A DAV:compare-baseline REPORT contains the differences between the baseline identified by the request-URL (the "request baseline") and the baseline specified in the request body (the "compare baseline"). Marshalling: The request body MUST be a DAV:compare-baseline XML element. The response body for a successful request MUST be a DAV:compare- baseline-report XML element. A DAV:added-version element identifies a version that is the DAV:checked-in version of a member of the DAV:baseline-collection of the compare baseline, but no version in the version history of that version is the DAV:checked-in version of a member of the DAV:baseline-collection of the request baseline. A DAV:deleted-version element identifies a version that is the DAV:checked-in version of a member of the DAV:baseline-collection of the request baseline, but no version in the version history of that version is the DAV:checked-in version of a member of the DAV:baseline-collection of the compare baseline. A DAV:changed-version element identifies two different versions from the same version history that are the DAV:checked-in version of the DAV:baseline-collection of the request baseline and the compare baseline, respectively. Preconditions: (DAV:must-be-baseline): The DAV:href in the request body MUST identify a baseline. (DAV:baselines-from-same-history): A server MAY require that the baselines being compared be from the same baseline history. 12.7.1 Example - DAV:compare-baseline REPORT >>REQUEST Clemm, et al. [Page 70] INTERNET-DRAFT WebDAV Versioning April 17, 2001 REPORT /bl-his/12/bl/14 HTTP/1.1 Host: repo.webdav.com Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://repo.webdav.org/bl-his/12/bl/15 >>RESPONSE HTTP/1.1 200 OK Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://repo.webdav.org/his/23/ver/8 http://repo.webdav.org/his/29/ver/12 http://repo.webdav.org/his/29/ver/19 http://repo.webdav.org/his/12/ver/4 In this example, the differences between baseline 14 and baseline 15 of http://repo.webdav.org/bl-his/12 are identified. 12.8Additional OPTIONS Semantics If a server supports the baseline feature, it MUST include "baseline" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 12.9Additional MKCOL Semantics Additional Postconditions: If a server automatically puts a newly created collection under baseline control, all postconditions for BASELINE-CONTROL apply to the MKCOL. Clemm, et al. [Page 71] INTERNET-DRAFT WebDAV Versioning April 17, 2001 12.10 Additional COPY Semantics Additional Postconditions: If the request creates a new collection at the Destination, and a server automatically puts a newly created collection under baseline control, all postconditions for BASELINE-CONTROL apply to the COPY. 12.11 Additional CHECKOUT Semantics Additional Preconditions: (DAV:must-not-update-baseline-collection): If the request-URL identifies a member of the configuration rooted at the DAV:baseline-collection of a baseline, the request MUST fail. 12.12 Additional CHECKIN Semantics Additional Preconditions: (DAV:no-checked-out-baseline-controlled-collection-members): If the request-URL identifies a version-controlled configuration, all version-controlled members of the DAV:baseline-controlled- collection of the version-controlled configuration MUST be checked- in. (DAV:one-version-per-history-per-baseline): If the request-URL identifies a version-controlled configuration, the set of versions selected by that version-controlled configuration MUST contain at most one version from any version history, where a version is selected by a version-controlled configuration if the version is identified by the DAV:checked-in property of any member of the configuration rooted at the DAV:baseline-controlled collection of that version-controlled configuration, or is identified by the DAV:checked-in property of any member of the configuration rooted at the DAV:baseline-collection of any subbaseline of that version- controlled configuration. (DAV:cannot-modify-version-controlled-configuration): If the request-URL identifies a version-controlled member of a baseline- controlled collection, the request MUST fail unless the DAV:auto- checkout property of the version-controlled configuration of that baseline-controlled collection is DAV:unlocked-update and the configuration is not write-locked, or the DAV:auto-checkout property is DAV:locked-update and the configuration is write- locked. Additional Postconditions: (DAV:create-baseline-collection): If the request-URL identifies a version-controlled configuration, the DAV:baseline-collection of the new baseline identifies a collection whose members have the Clemm, et al. [Page 72] INTERNET-DRAFT WebDAV Versioning April 17, 2001 same relative name and DAV:checked-in version as the members of the DAV:baseline-controlled-collection of the version-controlled configuration at the time of the request. (DAV:modify-configuration): If the request-URL identifies a version-controlled member of a baseline-controlled collection, this is a modification to the version-controlled configuration of that baseline-controlled collection, and standard auto-versioning semantics apply. 12.13 Additional UPDATE Semantics Additional Preconditions: (DAV:baseline-controlled-members-must-be-checked-in): If the request-URL identifies a version-controlled configuration, then all version-controlled members of the DAV:baseline-controlled- collection of that version-controlled configuration MUST be checked-in. (DAV:must-not-update-baseline-collection): If the request-URL identifies a member of the configuration rooted at the DAV:baseline-collection of a baseline, the request MUST fail. (DAV:cannot-modify-version-controlled-configuration): If the request updates the DAV:checked-in property of any version- controlled member of a baseline-controlled collection, the request MUST fail unless the DAV:auto-checkout property of the version- controlled configuration of that baseline-controlled collection is DAV:unlocked-update and the configuration is not write-locked, or the DAV:auto-checkout property is DAV:locked-update and the configuration is write-locked. Additional Postconditions: (DAV:set-baseline-controlled-collection-members): If the request- URL identifies a version-controlled configuration and the DAV:version element identifies a baseline, then the version- controlled members of the DAV:baseline-controlled-collection of that version-controlled configuration MUST have been updated so that they have the same relative name, content, and dead properties as the members of the DAV:baseline-collection of the baseline. In particular: - A version-controlled member for a given version history MUST have been deleted if there is no version-controlled member for that version history in the DAV:baseline-collection of the baseline. - A version-controlled member for a given version history MUST have been renamed if its name relative to the baseline-controlled collection is different from that of the version-controlled member for that version history in the DAV:baseline-collection of the baseline. - A new version-controlled member MUST have been created for each member of the DAV:baseline-collection of the baseline for which Clemm, et al. [Page 73] INTERNET-DRAFT WebDAV Versioning April 17, 2001 there is no corresponding version-controlled member in the baseline-controlled collection. - An UPDATE request MUST have been applied to each version- controlled member for a given version history whose DAV:checked-in version is not the same as that of the version-controlled member for that version history in the DAV:baseline-collection of the baseline. (DAV:modify-configuration): If the request updated the DAV:checked- in property of any version-controlled member of a baseline- controlled collection, this is a modification to the version- controlled configuration of that baseline-controlled collection, and standard auto-versioning semantics apply. 12.14 Additional MERGE Semantics If the merge version is a baseline, the merge target is a version- controlled configuration for the baseline history of that baseline, where the baseline-controlled collection of that version-controlled configuration is a member of the merge destination of the request. Additional Preconditions: (DAV:must-not-update-baseline-collection): Same as UPDATE (see Section 12.13). (DAV:cannot-modify-version-controlled-configuration): Same as UPDATE (see Section 12.13). Additional Postconditions: (DAV:merge-baseline): If the merge target is a version-controlled configuration whose DAV:checked-out baseline is not a descendant of the merge baseline, then the merge baseline MUST have been added to the DAV:auto-merge-set of a version-controlled configuration. Each baseline in the DAV:subbaseline-set of that baseline MUST have been merged into the merge destination, and the DAV:checked-in version of each member of the DAV:baseline-collection of that baseline MUST have been merged into the DAV:baseline-controlled-collection of that version-controlled configuration. (DAV:modify-configuration): Same as UPDATE (see Section 12.13). 13 ACTIVITY FEATURE An "activity" is a non-versionable resource that selects a set of versions that are on a single "line of descent", where a line of descent is a sequence of versions connected by successor relationships. If an activity selects versions from multiple version histories, the versions selected in each version history must be on a single line of descent. Clemm, et al. [Page 74] INTERNET-DRAFT WebDAV Versioning April 17, 2001 A common problem that motivates the use of activities is that it is often desirable to perform several different logical changes in a single workspace, and then selectively merge a subset of those logical changes to other workspaces. An activity can be used to represent a single logical change, where an activity tracks all the resources that were modified to effect that single logical change. When a version-controlled resource is checked out, the author specifies which activity should be associated with a new version that will be created when that version-controlled resource is checked in. It is then possible to select a particular logical change for merging into another workspace, by specifying the appropriate activity in a MERGE request. Another common problem is that although a version-controlled resource may need to have multiple lines of descent, all work done by members of a given team must be on a single line of descent (to avoid merging between team members). An activity resource provides the mechanism for addressing this problem. When a version- controlled resource is checked out, a client can request that an existing activity be used or that a new activity be created. Activity semantics then ensure that all versions in a given version history that are associated with an activity are on a single line of descent. If all members of a team share a common activity (or sub-activities of a common activity), then all changes made by members of that team will be on a single line of descent. The following diagram illustrates activities. Version V5 is the latest version of foo.html selected by activity Act-2, and version V8 is the latest version of bar.html selected by activity Act-2. foo.html History bar.html History +---+ +---+ Act-1| |V1 Act-1| |V6 +---+ +---+ | | | | +---+ +---+ Act-1| |V2 Act-2| |V7 +---+ +---+ / \ | / \ | +---+ +---+ +---+ Act-1| | Act-2| |V4 Act-2| |V8 +---+ +---+ +---+ | | | | +---+ +---+ Act-2| |V5 Act-3| |V9 +---+ +---+ Clemm, et al. [Page 75] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Activities appear under a variety of names in existing versioning systems. When an activity is used to capture a logical change, it is commonly called a "change set". When an activity is used to capture a line of descent, it is commonly called a "branch". When a system supports both branches and change sets, it is often useful to require that a particular change set occur on a particular branch. This relationship can be captured by making the change set activity be a "subactivity" of the branch activity. 13.1Activity Properties The activity feature introduces the following REQUIRED properties for an activity. 13.1.1 DAV:activity-version-set (computed) This property identifies each version whose DAV:activity-set property identifies this activity. Multiple versions of a single version history can be selected by an activity's DAV:activity- version-set property, but all DAV:activity-version-set versions from a given version history must be on a single line of descent from the root version of that version history. 13.1.2 DAV:activity-checkout-set (computed) This property identifies each checked-out resource whose DAV:activity-set identifies this activity. 13.1.3 DAV:subactivity-set This property identifies each activity that forms a part of the logical change being captured by this activity. An activity behaves as if its DAV:activity-version-set is extended by the DAV:activity-version-set of each activity identified in the DAV:subactivity-set. In particular, the versions in this extended set MUST be on a single line of descent, and when an activity selects a version for merging, the latest version in this extended set is the one that will be merged. A server MAY reject attempts to modify the DAV:subactivity-set of an activity. 13.1.4 DAV:current-workspace-set (computed) This property identifies each workspace whose DAV:current-activity- set identifies this activity. Clemm, et al. [Page 76] INTERNET-DRAFT WebDAV Versioning April 17, 2001 13.2Additional Version Properties The activity feature introduces the following REQUIRED property for a version. 13.2.1 DAV:activity-set This property identifies the activities that determine to which logical changes this version contributes, and on which lines of descent this version appears. A server MAY restrict the DAV:activity-set to identify a single activity. A server MAY refuse to allow the value of the DAV:activity-set property of a version to be modified. 13.3Additional Checked-Out Resource Properties The activity feature introduces the following REQUIRED properties for a checked-out resource. 13.3.1 DAV:unreserved This property of a checked-out resource indicates whether the DAV:activity-set of another checked-out resource associated with the version history of this version-controlled resource can have an activity that is in the DAV:activity-set property of this checked- out resource. A result of the requirement that an activity must form a single line of descent through a given version history is that if multiple checked-out resources for a given version history are checked out unreserved into a single activity, only the first CHECKIN will succeed. Before another of these checked-out resources can be checked in, the author will first have to merge into that checked- out resource the latest version selected by that activity from that version history, and then modify the DAV:predecessor-set of that checked-out resource to identify that version. PCDATA value: boolean 13.3.2 DAV:activity-set This property of a checked-out resource determines the DAV:activity-set property of the version that results from checking in this resource. Clemm, et al. [Page 77] INTERNET-DRAFT WebDAV Versioning April 17, 2001 13.4Additional Workspace Properties The activity feature introduces the following REQUIRED property for a workspace. 13.4.1 DAV:current-activity-set This property identifies the activities that currently are being performed in this workspace. When a member of this workspace is checked out, if no activity is specified in the checkout request, the DAV:current-activity-set will be used. This allows an activity-unaware client to update a workspace in which activity tracking is required. The DAV:current-activity-set MAY be restricted to identify at most one activity. 13.5MKACTIVITY Method A MKACTIVITY request creates a new activity resource. A server MAY restrict activity creation to particular collections, but a client can determine the location of these collections from a DAV:activity-collection-set OPTIONS request. Marshalling: If a request body is included, it MUST be a DAV:mkactivity XML element. The response MUST include a Cache-Control:no-cache header. Preconditions: (DAV:resource-must-be-null): A resource MUST NOT exist at the request-URL. (DAV:activity-location-ok): The request-URL MUST identify a location where an activity can be created. Postconditions: (DAV:initialize-activity): A new activity exists at the request- URL. The DAV:resourcetype of the activity MUST be DAV:activity. 13.5.1 Example - MKACTIVITY >>REQUEST MKACTIVITY /act/test-23 HTTP/1.1 Host: repo.webdav.org Clemm, et al. [Page 78] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Content-Length: 0 >>RESPONSE HTTP/1.1 201 Created Cache-Control: no-cache In this example, a new activity is created at http://repo.webdav.org/act/test-23. 13.6DAV:latest-activity-version REPORT The DAV:latest-activity-version REPORT can be applied to a version history to identify the latest version that is selected from that version history by a given activity. Marshalling: The request body MUST be a DAV:latest-activity-version XML element. The response body for a successful request MUST be a DAV:latest- activity-version-report XML element. The DAV:href of the response body MUST identify the version of the given version history that is a member of the DAV:activity-version- set of the given activity and has no ancestor that is a member of the DAV:activity-version-set of the given activity. Preconditions: (DAV:must-be-activity): The DAV:href in the request body MUST identify an activity. 13.7Additional OPTIONS Semantics If the server supports the activity feature, it MUST include "activity" as a field in the DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. A DAV:activity-collection-set element MAY be included in the request body to identify collections that may contain activity resources. Additional Marshalling: If an XML request body is included, it MUST be a DAV:options XML element. Clemm, et al. [Page 79] INTERNET-DRAFT WebDAV Versioning April 17, 2001 ANY value: A sequence of elements with at most one DAV:activity- collection-set element. If an XML response body for a successful request is included, it MUST be a DAV:options-response XML element. ANY value: A sequence of elements with at most one DAV:activity- collection-set element. If DAV:activity-collection-set is included in the request body, the response body for a successful request MUST contain a DAV:activity- collection-set element identifying collections that may contain activities. An identified collection MAY be the root collection of a tree of collections, all of which may contain activities. Since different servers can control different parts of the URL namespace, different resources on the same host MAY have different DAV:activity-collection-set values. The identified collections MAY be located on different hosts from the resource. 13.8Additional DELETE Semantics Additional Postconditions: (DAV:delete-activity-reference): If an activity is deleted, any reference to that activity in a DAV:activity-set, DAV:subactivity- set, or DAV:current-activity-set MUST be removed. 13.9Additional MOVE Semantics Additional Postconditions: (DAV:update-checked-out-reference): If a checked-out resource is moved, any reference to that resource in a DAV:activity-checkout property MUST be updated to refer to the new location of that resource. (DAV:update-activity-reference): If the request-URL identifies an activity, any reference to that activity in a DAV:activity-set, DAV:subactivity-set , or DAV:current-activity-set MUST be updated to refer to the new location of that activity. (DAV:update-workspace-reference): If the request-URL identifies a workspace, any reference to that workspace in a DAV:current- workspace-set property MUST be updated to refer to the new location of that workspace. Clemm, et al. [Page 80] INTERNET-DRAFT WebDAV Versioning April 17, 2001 13.10 Additional CHECKOUT Semantics A CHECKOUT request MAY specify the DAV:activity-set for the checked-out resource. Additional Marshalling: ANY value: A sequence of elements with at most one DAV:activity-set and at most one DAV:unreserved. Additional Preconditions: (DAV:one-checkout-per-activity-per-history): If there is a request activity set, unless DAV:unreserved is specified, another checkout from a version of that version history MUST NOT select an activity in that activity set. (DAV:linear-activity): If there is a request activity set, unless DAV:unreserved is specified, the selected version MUST be a descendant of all other versions of that version history that select that activity. Additional Postconditions: (DAV:initialize-activity-set): The DAV:activity-set of the checked- out resource is set as follows: - If DAV:new is specified as the DAV:activity-set in the request body, then a new activity created by the server is used. - Otherwise, if activities are specified in the request body, then those activities are used. - Otherwise, if the version-controlled resource is a member of a workspace and the DAV:current-activity-set of the workspace is set, then those activities are used. - Otherwise, the DAV:activity-set of the DAV:checked-out version is used. (DAV:initialize-unreserved): If DAV:unreserved was specified in the request body, then the DAV:unreserved property of the checked-out resource MUST be "true". 13.10.1 Example - CHECKOUT with an activity >>REQUEST CHECKOUT /ws/public/foo.html HTTP/1.1 Host: www.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: xxxx Clemm, et al. [Page 81] INTERNET-DRAFT WebDAV Versioning April 17, 2001 http://repo.webdav.org/act/fix-bug-23 >>RESPONSE HTTP/1.1 200 OK Cache-Control: no-cache In this example, the CHECKOUT is being performed in the http://repo.webdav.org/act/fix-bug-23 activity. 13.11 Additional CHECKIN Semantics Additional Preconditions: (DAV:linear-activity): Any version which is in the version history of the checked-out resource and whose DAV:activity-set identifies an activity from the DAV:activity-set of the checked-out resource MUST be an ancestor of the checked-out resource. Additional Postconditions: (DAV:initialize-activity-set): The DAV:activity-set of the new version MUST have been initialized to be the same as the DAV:activity-set of the checked-out resource. 13.12 Additional MERGE Semantics If the DAV:source element of the request body identifies an activity, then all checked-out resources in that activity (or any subactivity of that activity) are checked in, and then for each version history containing a version selected by that activity, the latest version selected by that activity is a merge version. Note that the versions selected by an activity are the versions in its DAV:activity-version-set unioned with the versions selected by the activities in its DAV:subactivity-set. A checked-out baseline in the activity is checked-in only after all other checked-out resources have been checked in and merged to their merge target. This ensures that modifications to members of a collection are captured by any new baseline of that collection. If a working baseline is checked in, the baseline-controlled collection that determines the DAV:baseline-collection of the new baseline is the merge target of that working baseline. Clemm, et al. [Page 82] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Additional Preconditions: (DAV:atomic-activity-checkin): If the DAV:source element identifies an activity, the server MAY fail the request if any of the checked- out resources in the DAV:activity-checkout-set of the activity cannot be checked in. Additional Postconditions: (DAV:checkin-activity): If the DAV:source element identified an activity, before determining the merge versions, the server MUST have checked in each checked-out resource that was in the DAV:activity-checkout-set. Before checking in a checked-out baseline, the server MUST have already checked in and merged all checked-out non-baseline resources. If a checked-out baseline was a working baseline, the baseline-controlled collection that determined the DAV:baseline-collection for the new baseline MUST have been the merge target for that new baseline. 14 VERSION-CONTROLLED-COLLECTION FEATURE As with any versionable resource, when a collection is put under version control, a version history resource is created to contain versions for that version-controlled collection. In order to preserve standard versioning semantics (a version of a collection should not be modifiable), a collection version only records information about the version-controlled bindings of that collection. In order to cleanly separate a modification to the namespace from a modification to content or dead properties, a version of a collection is not itself a collection, but just records in its DAV:version-controlled-binding-set property the binding name and version history resource of each version-controlled internal member of that collection. If, instead, a collection version contained bindings to other versions, creating a new version of a resource would require creating a new version of all the collection versions that contain that resource, which would cause activities to become entangled. For example, suppose a "feature-12" activity created a new version of /x/y/a.html. If a collection version contained bindings to versions of its members, a new version of /x/y would have to be created to contain the new version of /x/y/a.html, and a new version of /x would have to be created to contain the new version of /x/y. Now suppose a "bugfix-47" activity created a new version of /x/z/b.html. Again, a new version of /x/z and a new version of /x would have to be created to contain the new version of /x/y/b.html. But now it is impossible to merge just "bugfix-47" into another workspace without "feature-12", because the version of /x that contains the desired version of /x/z/b.html also contains version of /x/y/a.html created for "feature-12". If, instead, a collection version just records the binding name and version history resource of each version-controlled internal member, changing the version selected by a member of that collection would Clemm, et al. [Page 83] INTERNET-DRAFT WebDAV Versioning April 17, 2001 not require a new version of the collection. The new version is still in the same version history so no new collection version is required, and "feature-12" and "bugfix-47" would not become entangled. In the following example, there are three version histories, named VH14, VH19, and VH24, where VH14 contains versions of a collection. The version-controlled collection /x has version V2 of version history VH14 as its DAV:checked-in version. Since V2 has recorded two version controlled bindings, one with binding name "a" to version history VH19, and the other with binding name "b" to version history VH24, /x MUST have two version-controlled bindings, one named "a" to a version-controlled resource for history VH19, and the other named "b" to a version-controlled resource for history VH24. The version-controlled resource /x/a currently has V4 of VH19 as its DAV:checked-in version, while /x/b has V8 of VH24as its DAV:checked-in version. VH19 +---------+ | +---+ | | | |V4 | | +---+ | | | | | | | | +---+ | | | |V5 | VH14 | +---+ | +---------+ | | | | +---+ | | | | a +---+ | | |V1 | | +---+ | ---->| |checked-in=V4 | +---+ | a | | |V6 | / +---+ | | ------>| +---+ | / | | / | +---------+ +---+ | +---+ | /x | |checked-in=V2 | | |V2 | +---+ | +---+ | VH24 \ | | \ | b +---------+ \ b +---+ | | ------>| +---+ | ---->| |checked-in=V8 | +---+ | | | |V7 | +---+ | | |V3 | | +---+ | | +---+ | | | | +---------+ | | | | +---+ | | | |V8 | | +---+ | | | | | | | | +---+ | | | |V9 | | +---+ | +---------+ Clemm, et al. [Page 84] INTERNET-DRAFT WebDAV Versioning April 17, 2001 For any request (e.g. DELETE, MOVE, COPY) that modifies a version- controlled binding of a checked-in version-controlled collection, the request MUST fail unless the version-controlled collection has a DAV:auto-checkout property. If the version-controlled collection has a DAV:auto-checkout property, standard auto-versioning semantics apply. This functionality allows a versioning unaware client to add a version to the collection version history. Although a collection version only records the version-controlled bindings of a collection, a version-controlled collection MAY contain both version-controlled and non-version-controlled bindings. Non-version-controlled bindings are not under version control, and therefore can be added or deleted without checking out the version-controlled collection. This feature is essential for the support of lock null resources, since a lock null resource is a temporary internal member of a collection that should only exist for the duration of the lock, and should not be captured in the version history of that collection. Note that a collection version captures only a defined subset of the state of a collection. In particular, a version of a collection captures its dead properties and its bindings to version-controlled resources, but not its live properties or bindings to non-version-controlled resources. 14.1Version-Controlled Collection Properties A version-controlled collection has all the properties of a collection and of a version-controlled resource. In addition, the version-controlled-collection feature introduces the following REQUIRED property for a version-controlled collection. 14.1.1 DAV:eclipsed-set (computed) This property identifies the non-version-controlled internal members of the collection that currently are eclipsing a version- controlled internal member of the collection. An UPDATE or MERGE request can give a version-controlled collection a version-controlled internal member that has the same name as an existing non-version-controlled internal member. In this case, the non-version-controlled internal member takes precedence and is said to "eclipse" the new versioned-controlled internal member. If the non-version-controlled internal member is removed (e.g. by a DELETE or MOVE), the version-controlled internal member is exposed. Clemm, et al. [Page 85] INTERNET-DRAFT WebDAV Versioning April 17, 2001 14.2Collection Version Properties A collection has all the properties of a version. In addition, the version-controlled-collection feature introduces the following REQUIRED property for a collection version. 14.2.1 DAV:version-controlled-binding-set (protected) This property captures the name and version-history of each version-controlled internal member of a collection. PCDATA value: URL segment 14.3Working Collection Properties When a server supports the working-resource feature, a client can check out a collection version to create a "working collection". Unlike a version-controlled collection, which contains bindings to version-controlled resources and non-version-controlled resources, a working collection contains bindings to version history resources and non-version-controlled resources. In particular, a working resource is initialized to contain bindings to the version history resources specified by the DAV:version-controlled-binding-set of the checked out version. The members of a working collection can then be deleted or moved to another working collection. Non- version-controlled resources can be added to a working collection with methods such as PUT, COPY, and MKCOL. When a working collection is checked in, a VERSION-CONTROL request is automatically applied to every non-version-controlled member of the working collection, and each non-version-controlled member is replaced by its newly created version history. The DAV:version- controlled-binding-set of the new version resulting from checking in a working collection contains the binding name and version history URL for each member of the working collection. 14.3.1 DAV:version-controlled-binding-set This property determines the DAV:version-controlled-binding-set property of the collection version that results from checking in this working collection (see Section 14.2.1). 14.4Additional OPTIONS Semantics If the server supports the version-controlled-collection feature, it MUST include "version-controlled-collection" as a field in the Clemm, et al. [Page 86] INTERNET-DRAFT WebDAV Versioning April 17, 2001 DAV response header from an OPTIONS request on any resource that supports any versioning properties, reports, or methods. 14.5Additional DELETE Semantics Additional Preconditions: (DAV:cannot-modify-checked-in-parent): If the request-URL identifies a version-controlled resource, the DELETE MUST fail when the collection containing the version-controlled resource is a checked-in version-controlled collection, unless DAV:auto-checkout semantics will automatically check out the version-controlled collection. 14.6Additional MKCOL Semantics Additional Preconditions: If the request creates a new resource that is automatically placed under version control, all preconditions for VERSION-CONTROL apply to the request. Additional Postconditions: If the new collection is automatically put under version control, all postconditions for VERSION-CONTROL apply to the request. 14.7Additional COPY Semantics Additional Preconditions: (DAV:cannot-copy-collection-version): If the source of the request is a collection version, the request MUST fail.. 14.8Additional MOVE Semantics Additional Preconditions: (DAV:cannot-modify-checked-in-parent): If the source of the request is a version-controlled resource, the request MUST fail when the collection containing the source is a checked-in version-controlled collection, unless DAV:auto-checkout semantics will automatically check out that version-controlled collection. (DAV:cannot-modify-destination-checked-in-parent): If the source of the request is a version-controlled resource, the request MUST fail when the collection containing the destination is a checked-in version-controlled collection, unless DAV:auto-checkout semantics will automatically check out that version-controlled collection. Clemm, et al. [Page 87] INTERNET-DRAFT WebDAV Versioning April 17, 2001 14.9Additional VERSION-CONTROL Semantics Additional Preconditions: (DAV:cannot-modify-checked-in-parent): If the parent of the request-URL is a checked-in version-controlled collection, the request MUST fail unless DAV:auto-checkout semantics will automatically check out that version-controlled collection. 14.10 Additional CHECKOUT Semantics Additional Postconditions: (DAV:initialize-version-history-bindings): If the request has been applied to a collection version, the new working collection MUST be initialized to contain a binding to each of the history resources identified in the DAV:version-controlled-binding-set of that collection version. 14.11 Additional CHECKIN Semantics Additional Postconditions: (DAV:initialize-version-controlled-bindings): If the request-URL identified a version-controlled collection, then the DAV:version- controlled-binding-set of the new collection version MUST contain a DAV:version-controlled-binding that identifies the binding name and version history for each version-controlled binding of the version- controlled collection. (DAV:version-control-working-collection-members): If the request- URL identified a working collection, a VERSION-CONTROL request MUST have been automatically applied to every non-version-controlled member of the working collection, and each non-version-controlled members MUST have been replaced by its newly created version history. If a working collection member was a non-version- controlled collection, every member of the non-version-controlled collection MUST have been placed under version control before the non-version-controlled collection was placed under version control. The DAV:version-controlled-binding-set of the new collection version MUST contain a DAV:version-controlled-binding that identifies the binding name and the version history URL for each member of the working collection. 14.12 Additional UPDATE and MERGE Semantics Additional Postconditions: (DAV:update-version-controlled-collection-members): If the request modified the DAV:checked-in version of a version-controlled Clemm, et al. [Page 88] INTERNET-DRAFT WebDAV Versioning April 17, 2001 collection, then the version-controlled members of that version- controlled collection MUST have been updated. In particular: - A version-controlled internal member MUST have been deleted if its version history is not identified by the DAV:version- controlled-binding-set of the new DAV:checked-in version. - A version-controlled internal member for a given version history MUST have been renamed if its binding name differs from the DAV:binding-name for that version history in the DAV:version- controlled-binding-set of the new DAV:checked-in version. - A new version-controlled internal member MUST have been created when a version history is identified by the DAV:version-controlled- binding-set of the DAV:checked-in version, but there was no member of the version-controlled collection for that version history. If a new version-controlled member is in a workspace that already has a version-controlled resource for that version history, then the new version-controlled member MUST be just a binding (i.e. another name for) that existing version-controlled resource. Otherwise, the content and dead properties of the new version- controlled member MUST have been initialized to be those of the version specified for that version history by the request. If no version is specified for that version history by the request, the root version of that version history MUST have been used. 15 OPTIONAL REPORTS 15.1DAV:expand-property REPORT Many properties consist of a set of one or more DAV:href elements. The DAV:expand-property REPORT provides a mechanism for retrieving in one request the properties from the resources identified by those DAV:href elements. This report not only decreases the number of requests required, but also allows the server to minimize the number of separate read transactions required on the underlying versioning store. Marshalling: The request body MUST be a DAV:expand-property XML element. name value: a property element type namespace value: an XML namespace The request MAY include a Depth header. The response body for a successful request MUST be a DAV:multistatus XML element. multistatus: see RFC 2518, Section 12.9 Clemm, et al. [Page 89] INTERNET-DRAFT WebDAV Versioning April 17, 2001 The properties reported in the DAV:prop elements of the DAV:multistatus element MUST be those identified by the DAV:property elements in the DAV:expand-property element. If there are DAV:property elements nested within a DAV:property element, then every DAV:href in the value of the corresponding property is replaced by a DAV:response element whose DAV:prop elements report the values of the properties identified by the nested DAV:property elements. The nested DAV:property elements can in turn contain DAV:property elements, so that multiple levels of DAV:href expansion can be requested. Note that a validating parser MUST be aware that the DAV:expand- property report effectively modifies the DTD of every property by replacing every occurrence of "href" in the DTD with "href | response". 15.1.1 Example - DAV:expand-property This example describes how to query a version-controlled resource to determine the DAV:creator-display-name and DAV:activity-set of every version in the version history of that version-controlled resource. >>REQUEST REPORT /foo.html HTTP/1.1 Host: www.webdav.org Content-Type: text/xml; charset="utf-8" Content-Length: xxxx >>RESPONSE HTTP/1.1 207 Multi-Status Content-Type: text/xml; charset="utf-8" Content-Length: xxxx http://www.webdav.org/foo.html Clemm, et al. [Page 90] INTERNET-DRAFT WebDAV Versioning April 17, 2001 http://repo.webdav.org/his/23 http://repo.webdav.org/his/23/ver/1 Fred http://www.webdav.org/ws/dev/sally HTTP/1.1 200 OK http://repo.webdav.org/his/23/ver/2 Sally http://repo.webdav.org/act/add-refresh- cmd HTTP/1.1 200 OK HTTP/1.1 200 OK HTTP/1.1 200 OK In this example, the DAV:creator-displayname and DAV:activity-set properties of the versions in the DAV:version-set of the DAV:version-history of http://www.webdav.org/foo.html are reported. 16 INTERNATIONALIZATION CONSIDERATIONS This specification has been designed to be compliant with the IETF Policy on Character Sets and Languages [RFC2277]. Specifically, where human-readable strings exist in the protocol, either their charset is explicitly stated, or XML mechanisms are used to specify the charset used. Additionally, these human-readable strings all have the ability to express the natural language of the string. Clemm, et al. [Page 91] INTERNET-DRAFT WebDAV Versioning April 17, 2001 Most of the human-readable strings in this protocol appear in properties, such as DAV:creator-displayname. As defined by RFC 2518, properties have their values marshaled as XML. XML has explicit provisions for character set tagging and encoding, and requires that XML processors read XML elements encoded, at minimum, using the UTF-8 [RFC2279] encoding of the ISO 10646 multilingual plane. The charset parameter of the Content-Type header, together with the XML "encoding" attribute, provide charset identification information for MIME and XML processors. Proper use of the charset header with XML is described in RFC 3023. XML also provides a language tagging capability for specifying the language of the contents of a particular XML element. XML uses either IANA registered language tags (see RFC 1766) or ISO 639 language tags in the "xml:lang" attribute of an XML element to identify the language of its content and attributes. DeltaV applications, since they build upon WebDAV, are subject to the internationalization requirements specified in RFC 2518, Section 16. In brief, these requirements mandate the use of XML character set tagging, character set encoding, and language tagging capabilities. Additionally, they strongly recommend reading RFC 3023 for instruction on the use of MIME media types for XML transport and the use of the charset header. Within this specification, a label is a human-readable string that is marshaled in the Label header and as XML in request entity bodies. When used in the Label header, the value of the label is encoded using UTF-8. 17 SECURITY CONSIDERATIONS All of the security considerations of WebDAV discussed in RFC 2518, Section 17 also apply to WebDAV versioning. Some aspects of the versioning protocol help address security risks introduced by WebDAV, but other aspects can increase these security risks. These issues are detailed below. 17.1Auditing and Traceability WebDAV increases the ease with which a remote client can modify resources on a web site, but this also increases the risk of important information being overwritten and lost, either through user error or user maliciousness. The use of WebDAV versioning can help address this problem by guaranteeing that previous information is saved in the form of immutable versions, and therefore is easily available for retrieval or restoration. In addition, the version history provides a log of when changes were made, and by whom. When requests are appropriately authenticated, the history mechanism provides a clear audit trail for changes to web resources. This can often significantly improve the ability to identify the source of the security problem, and thereby help guard against it in the future. Clemm, et al. [Page 92] INTERNET-DRAFT WebDAV Versioning April 17, 2001 17.2Increased Need for Access Control WebDAV versioning provides a variety of links between related pieces of information. This can increase the risk that authentication or authorization errors allow a client to locate sensitive information. For example, if version history is not appropriately protected by access control, a client can use the version history of a public resource to identify later versions of that resource that the author intended to keep private. This increases the need for reliable authentication and accurate authorization. A WebDAV versioning client should be designed to handle a mixture of 200 (OK) and 404 (Forbidden) responses on attempts to access the properties and reports that are supported by a resource. For example, a particular user may be authorized to access the content and dead properties of a version-controlled resource, but not be authorized to access the DAV:checked-in, DAV:checked-out, or DAV:version-history properties of that resource. 17.3Security Through Obscurity While it is acknowledged that "obscurity" is not an effective means of security, it is often a good technique to keep honest people honest. Within this protocol, version URLs, version history URLs, and working resource URLs are generated by the server and can be properly obfuscated so as not to draw attention to them. For example, a version of "http://foobar.com/reviews/salaries.html" might be assigned a URL such as "http://foobar.com/repo/4934943". 17.4Denial of Service The auto-versioning mechanism provided by WebDAV can result in a large number of resources being created on the server, since each update to a resource could potentially result in the creation of a new version resource. This increases the risk of a denial of service attack that exhausts the storage capability of a server. This risk is especially significant because it can be an unintentional result of something like an aggressive auto-save feature provided by an editing client. A server can decrease this risk by using delta storage techniques to minimize the cost of additional versions, and by limiting auto-versioning to a locking client, and thereby decreasing the number of inadvertent version creations. 18 IANA CONSIDERATIONS This document uses the namespace defined by RFC 2518 for XML elements. All other IANA considerations from RFC 2518 are also applicable to WebDAV Versioning. Clemm, et al. [Page 93] INTERNET-DRAFT WebDAV Versioning April 17, 2001 19 INTELLECTUAL PROPERTY The following notice is copied from RFC 2026, Section 10.4, and describes the position of the IETF concerning intellectual property claims made against this document. The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use other technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the procedures of the IETF with respect to rights in standards- track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF Secretariat. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director. 20 ACKNOWLEDGEMENTS This protocol is the collaborative product of the authors and the rest of the DeltaV design team: Boris Bokowski (OTI), Bruce Cragun (Novell), Jim Doubek (Macromedia), David Durand (INSO), Lisa Dusseault (Xythos), Tim Ellison (OTI), Chuck Fay (FileNet), Yaron Goland, Mark Hale (Interwoven), Henry Harbury (Merant), James Hunt, Jeff McAffer (OTI), Juergen Reuter, Edgar Schwarz (Marconi), Eric Sedlar (Oracle), Bradley Sergeant, Greg Stein, and John Vasta (Rational). We would like to acknowledge the foundation laid for us by the authors of the WebDAV and HTTP protocols upon which this protocol is layered, and the invaluable feedback from the WebDAV and DeltaV working groups. 21 REFERENCES [ISO639] ISO, "Code for the representation of names of languages", ISO 639:1988, 1998. [RFC1766] H.T.Alvestrand, "Tags for the Identification of Languages", Uninett, 1995. [RFC2026] S.Bradner, "The Internet Standards Process", Harvard, 1996. Clemm, et al. [Page 94] INTERNET-DRAFT WebDAV Versioning April 17, 2001 [RFC2119] S.Bradner, "Key words for use in RFCs to Indicate Requirement Levels", Harvard, 1997. [RFC2277] H.T.Alvestrand, "IETF Policy on Character Sets and Languages", BCP 18, Uninett, 1998. [RFC2279] F.Yergeau, "UTF-8, a transformation format of ISO 10646", Alis Technologies, 1998. [RFC2396] T.Berners-Lee, R.Fielding, L.Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", MIT, U.C.Irvine, Xerox, 1998. [RFC2518] Y.Goland, E.Whitehead, A.Faizi, S.R.Carter, D.Jensen, "HTTP Extensions for Distributed Authoring - WEBDAV", Microsoft, U.C.Irvine, Netscape, Novell, 1999. [RFC2616] R.Fielding, J.Gettys, J.C.Mogul, H.Frystyk, L.Masinter, P.Leach, and T.Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", U.C.Irvine, Compaq, Xerox, Microsoft, MIT/LCS, 1999. [RFC3023]M.Murata, S.St.Laurent, D.Kohn, "XML Media Types", IBM, simonstl.com, Skymoon Ventures, 2001. Clemm, et al. [Page 95] INTERNET-DRAFT WebDAV Versioning April 17, 2001 22 AUTHORS' ADDRESSES Geoffrey Clemm Rational Software 20 Maguire Road, Lexington, MA 02421 Email: geoffrey.clemm@rational.com Jim Amsden IBM 3039 Cornwallis, Research Triangle Park, NC 27709 Email: jamsden@us.ibm.com Christopher Kaler Microsoft One Microsoft Way, Redmond, WA 90852 Email: ckaler@microsoft.com Jim Whitehead UC Santa Cruz, Dept. of Computer Science 1156 High Street, Santa Cruz, CA 95064 Email: ejw@cse.ucsc.edu Clemm, et al. [Page 96]