Behave S. Sivakumar Internet-Draft R. Penno Intended status: Standards Track Cisco Systems Expires: August 15, 2014 February 11, 2014 IPFIX Information Elements for logging NAT Events draft-ietf-behave-ipfix-nat-logging-03 Abstract NAT devices are required to log events like creation and deletion of translations and information about the resources it is managing. The logs are required in many cases to identify an attacker or a host that was used to launch malicious attacks and/or for various other purposes of accounting. Since there is no standard way of logging this information, different NAT devices behave differently and hence it is difficult to expect a consistent behavior. The lack of a consistent way makes it difficult to write the collector applications that would receive this data and process it to present useful information. This document describes the information that is required to be logged by the NAT devices. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on August 15, 2014. Copyright Notice Copyright (c) 2014 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of Sivakumar & Penno Expires August 15, 2014 [Page 1] Internet-Draft IPFIX IEs for NAT logging February 2014 publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1. Requirements Language . . . . . . . . . . . . . . . . . . 3 3. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. Applicability . . . . . . . . . . . . . . . . . . . . . . . . 4 5. Event based logging . . . . . . . . . . . . . . . . . . . . . 4 5.1. Logging of destination information . . . . . . . . . . . 5 5.2. Information Elements . . . . . . . . . . . . . . . . . . 5 5.3. Definition of NAT Events . . . . . . . . . . . . . . . . 7 5.4. Quota exceeded Event types . . . . . . . . . . . . . . . 8 5.5. Threshold reached Event types . . . . . . . . . . . . . . 8 5.6. Templates for NAT Events . . . . . . . . . . . . . . . . 9 5.6.1. NAT44 create and delete session events . . . . . . . 9 5.6.2. NAT64 create and delete session events . . . . . . . 10 5.6.3. NAT44 BIB create and delete events . . . . . . . . . 11 5.6.4. NAT64 BIB create and delete events . . . . . . . . . 11 5.6.5. Addresses Exhausted event . . . . . . . . . . . . . . 12 5.6.6. Ports Exhausted event . . . . . . . . . . . . . . . . 12 5.6.7. Quota exceeded events . . . . . . . . . . . . . . . . 13 5.6.7.1. Maximum session entries exceeded . . . . . . . . 13 5.6.7.2. Maximum BIB entries exceeded . . . . . . . . . . 13 5.6.7.3. Maximum entries per user exceeded . . . . . . . . 13 5.6.7.4. Maximum active host or subscribers exceeded . . . 14 5.6.7.5. Maximum fragments pending reassembly exceeded . . 14 5.6.8. Threshold reached events . . . . . . . . . . . . . . 15 5.6.8.1. Address pool high or low threshold reached . . . 15 5.6.8.2. Address and port high threshold reached . . . . . 15 5.6.8.3. Per-user Address and port high threshold reached 16 5.6.8.4. Global Address mapping high threshold reached . . 16 5.6.9. Address binding create and delete events . . . . . . 17 5.6.10. Port block allocation and de-allocation . . . . . . . 17 6. Encoding . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6.1. IPFIX . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 18 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 18 9. Management Considerations . . . . . . . . . . . . . . . . . . 19 9.1. Ability to collect events from multiple NAT devices . . . 19 9.2. Ability to suppress events . . . . . . . . . . . . . . . 19 10. Security Considerations . . . . . . . . . . . . . . . . . . . 19 Sivakumar & Penno Expires August 15, 2014 [Page 2] Internet-Draft IPFIX IEs for NAT logging February 2014 11. References . . . . . . . . . . . . . . . . . . . . . . . . . 19 11.1. Normative References . . . . . . . . . . . . . . . . . . 19 11.2. Informative References . . . . . . . . . . . . . . . . . 20 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 20 1. Terminology The usage of the term "NAT device" in this document refer to any NAT44 and NAT64 devices. The usage of the term "collector" refers to any device that receives the binary data from a NAT device and converts that into meaningful information. This document uses the term "Session" as it is defined in [RFC2663] and the term BIB as it is defined in [RFC6146]. The usage of the term Information Element (IE) is defined in [RFC5101bis]. 2. Introduction The IPFIX Protocol [RFC5101bis] defines a generic push mechanism for exporting information and events. The IPFIX Information Model [IPFIX-IANA] defines a set of standard Information Elements (IEs) which can be carried by the IPFIX protocol. This document details the IPFIX Information Elements(IEs) that are required for logging by a NAT device. The document will specify the format of the IE's that are required to be logged by the NAT device and all the optional fields. The fields specified in this document are gleaned from [RFC4787] and [RFC5382]. Test [3GPP] This document and [I-D.behave-syslog-nat-logging] are provided in order to standardize the events and parameters to be recorded, using IPFIX [RFC5101bis] and SYSLOG [RFC5424]respectively. 2.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Scope This document provides the information model to be used for logging the NAT devices including Carrier Grade NAT (CGN) events. This document focuses exclusively on the specification of IPFIX IE's. This document does not provide guidance on the transport protocol like TCP, UDP or SCTP that is to be used to log NAT events. The log events SHOULD NOT be lost but the choice of the actual transport protocol is beyond the scope of this document. Sivakumar & Penno Expires August 15, 2014 [Page 3] Internet-Draft IPFIX IEs for NAT logging February 2014 The existing IANA IPFIX IEs registry [IPFIX-IANA] already has assignments for many NAT logging events. For convenience, this document uses those same IEs. However, as stated earlier, this document is not defining IPFIX or NetFlow v9 as the framework for logging. Rather, the information contained in these elements is within the scope of this document. This document assumes that the NAT device will use the existing IPFIX framework to send the log events to the collector. This would mean that the NAT device will specify the template that it is going to use for each of the events. The templates can be of varying length and there could be multiple templates that a NAT device could use to log the events. The implementation details of the collector application is beyond the scope of this document. The optimization of logging the NAT events are left to the implementation and are beyond the scope of this document. 4. Applicability NAT logging based on IPFIX uses binary encoding and hence is very efficient. IPFIX based logging is recommended for environments where a high volume of logging is required, for example, where per-flow logging is needed. However, IPFIX based logging requires a collector that processes the binary data and requires a network management application that converts this binary data to a human readable format. 5. Event based logging An event in a NAT device can be viewed as a happening as it relates to the management of NAT resources. The creation and deletion of NAT sessions and bindings are examples of events as it results in the resources (addresses and ports) being allocated or freed. The events can happen either through the processing of data packets flowing through the NAT device or through an external entity installing policies on the NAT router or as a result of an asynchronous event like a timer. The list of events are provided in Section 4.1. Each of these events SHOULD be logged, unless they are administratively prohibited. A NAT device MAY log these events to multiple collectors if redundancy is required. The network administrator will specify the collectors to which the log records are to be sent. A collector may receive NAT events from multiple CGN devices and should be able to distinguish between the devices. Each CGN device Sivakumar & Penno Expires August 15, 2014 [Page 4] Internet-Draft IPFIX IEs for NAT logging February 2014 should have a unique source ID to identify themselves. The source ID is part of the IPFIX template and data exchange. Prior to logging any events, the NAT device MUST send the template of the record to the collector to advertise the format of the data record that it is using to send the events. The templates can be exchanged as frequently as required given the reliability of the connection. There SHOULD be a configurable timer for controlling the template refresh. NAT device SHOULD combine as many events as possible in a single packet to effectively utilize the network bandwidth. 5.1. Logging of destination information Logging of destination information in a NAT event has been discussed in [RFC6302] and [RFC6888]. Logging of destination information increases the size of each record and increases the need for storage considerably. It increases the number of log events generated because when the same user connects to a different destination, it results in a log record per destination address. Logging of destination information also results in the loss of privacy and hence should be done with caution. However, this draft provides the necessary fields to log the destination information in cases where they are required to be logged. 5.2. Information Elements The templates could contain a subset of the Information Elements(IEs) shown in Table 1 depending upon the event being logged. For example a NAT44 session creation template record will contain, {sourceIPv4Adress, postNATSourceIPv4Address, destinationIpv4Address, postNATDestinationIPv4Address, sourceTransportPort, postNAPTSourceTransportPort, destinationTransportPort, postNAPTDestTransportPort, internalAddressRealm, natEvent, timeStamp} An example of the actual event data record is shown below - in a readable form {192.168.16.1, 201.1.1.100, 207.85.231.104, 207.85.231.104, 14800, 1024, 80, 80, 0, 1, 09:20:10:789} A single NAT device could be exporting multiple templates and the collector should support receiving multiple templates from the same source. Sivakumar & Penno Expires August 15, 2014 [Page 5] Internet-Draft IPFIX IEs for NAT logging February 2014 The following is the table of all the IE's that a CGN device would need to export the events. The formats of the IE's and the IPFIX IDs are listed below. +----------------------------------+--------+-------+---------------+ | Field Name | Size | IANA | Description | | | (bits) | IPFIX | | | | | ID | | +----------------------------------+--------+-------+---------------+ | timeStamp | 64 | 323 | System Time | | | | | when the | | | | | event | | | | | occured. | | natInstanceId | 32 | TBD | NAT Instance | | | | | Identifier | | vlanID | 16 | 58 | VLAN ID in | | | | | case of | | | | | overlapping | | | | | networks | | ingressVRFID | 32 | 234 | VRF ID in | | | | | case of | | | | | overlapping | | | | | networks | | sourceIPv4Address | 32 | 8 | Source IPv4 | | | | | Address | | postNATSourceIPv4Address | 32 | 225 | Translated | | | | | Source IPv4 | | | | | Address | | protocolIdentifier | 8 | 4 | Transport | | | | | protocol | | sourceTransportPort | 16 | 7 | Source Port | | postNAPTsourceTransportPort | 16 | 227 | Translated | | | | | Source port | | destinationIPv4Address | 32 | 12 | Destination | | | | | IPv4 Address | | postNATDestinationIPv4Address | 32 | 226 | Translated | | | | | IPv4 | | | | | destination | | | | | address | | destinationTransportPort | 16 | 11 | Destination | | | | | port | | postNAPTdestinationTransportPort | 16 | 228 | Translated | | | | | Destination | | | | | port | | sourceIPv6Address | 27 | 128 | Source IPv6 | | | | | address | | destinationIPv6Address | 128 | 28 | Destination | | | | | IPv6 address | Sivakumar & Penno Expires August 15, 2014 [Page 6] Internet-Draft IPFIX IEs for NAT logging February 2014 | postNATSourceIPv6Address | 128 | 281 | Translated | | | | | source IPv6 | | | | | addresss | | postNATDestinationIPv6Address | 128 | 282 | Translated | | | | | Destination | | | | | IPv6 address | | internalAddressRealm | 8 | 229 | Source | | | | | Address Realm | | externalAddressRealm | 8 | TBD | Destination | | | | | Address Realm | | natEvent | 8 | 230 | Type of Event | | portRangeStart | 16 | 361 | Allocated | | | | | port block | | | | | start | | portRangeEnd | 16 | 362 | Allocated | | | | | Port block | | | | | end | | natPoolID | 32 | 283 | NAT pool | | | | | Identifier | | natLimitEvent | 32 | TBD | Limit event | | | | | identifier | +----------------------------------+--------+-------+---------------+ Table 1: Template format Table 5.3. Definition of NAT Events The following are the list of NAT events and the proposed event values. The list can be expanded in the future as necessary. The data record will have the corresponding natEvent value to identify the event that is being logged. Sivakumar & Penno Expires August 15, 2014 [Page 7] Internet-Draft IPFIX IEs for NAT logging February 2014 +--------------------------+--------+ | Event Name | Values | +--------------------------+--------+ | NAT44 Session create | 1 | | NAT44 Session delete | 2 | | NAT Addresses exhausted | 3 | | NAT64 Session create | 4 | | NAT64 Session delete | 5 | | NAT44 BIB create | 6 | | NAT44 BIB delete | 7 | | NAT64 BIB create | 8 | | NAT64 BIB delete | 9 | | NAT ports exhausted | 10 | | Quota exceeded | 11 | | Address binding create | 12 | | Address binding delete | 13 | | Port block allocation | 14 | | Port block de-allocation | 15 | | Threshold reached | 16 | +--------------------------+--------+ Table 2: NAT Event ID table 5.4. Quota exceeded Event types The following table shows the sub event types for the Quota exceeded or limits reached event. The events that can be reported are the Maximum session entries limit reached, Maximum BIB entries limit reached, Maximum session/BIB entries per user limit reached and maximum subscribers or hosts limit reached. +---------------------------------------+--------+ | Quota Exceeded Event Name | Values | +---------------------------------------+--------+ | Maximum Session entries | 1 | | Maximum BIB entries | 2 | | Maximum entries per user | 3 | | Maximum active hosts or subscribers | 4 | | Maximum fragments pending reassembly | 5 | +---------------------------------------+--------+ Table 3: Quota Exceeded event table 5.5. Threshold reached Event types The following table shows the sub event types for the threshold reached event. The administrator can configure the thresholds and Sivakumar & Penno Expires August 15, 2014 [Page 8] Internet-Draft IPFIX IEs for NAT logging February 2014 whenever the threshold is reached or exceeded, the corresponding events are generated. The address pool high threshold event will be reported when the address pool reaches a high water mark as defined by the operator. This will sever as an indication that the operator might have to add more addresses to the pool or an indication that the subsequent users may be denied NAT translation mappings. The address and port mapping high threshold event is generated, when the number of ports in the configured address pool has reached a configured threshold. The per-user address and port mapping high threshold is generated when a single user uses more address and port mapping than a configured threshold. +---------------------------------------------------------+--------+ | Threshold Exceeded Event Name | Values | +---------------------------------------------------------+--------+ | Address pool high threshold event | 1 | | Address pool low threshold event | 2 | | Address and port mapping high threshold event | 3 | | Address and port mapping per user high threshold event | 4 | | Global Address mapping high threshold event | 5 | +---------------------------------------------------------+--------+ Table 4: Threshold event table 5.6. Templates for NAT Events The following is the template of events that will have to logged. The events below are identified at the time of this writing but the events are expandable. Depending on the implementation and configuration various IE's specified can be included or ignored. 5.6.1. NAT44 create and delete session events These events will be generated when a NAT44 session is created or deleted. The template will be the same, the natEvent will indicate whether it is a create or a delete event. The following is a template of the event. The destination address and port information is optional as required by [RFC6888]. However, when the destination information is suppressed, the session log event contains the same information as the BIB event. In such cases, the NAT device SHOULD NOT send both BIB and session events. Sivakumar & Penno Expires August 15, 2014 [Page 9] Internet-Draft IPFIX IEs for NAT logging February 2014 +----------------------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +----------------------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | vlanID/ingressVRFID | 32 | No | | sourceIPv4Address | 32 | Yes | | postNATSourceIPv4Address | 32 | Yes | | protocolIdentifier | 8 | Yes | | sourceTransportPort | 16 | Yes | | postNAPTsourceTransportPort | 16 | Yes | | destinationIPv4Address | 32 | No | | postNATDestinationIPv4Address | 32 | No | | destinationTransportPort | 16 | No | | postNAPTdestinationTransportPort | 16 | No | | internalAddressRealm | 8 | No | | externalAddressRealm | 8 | No | | natEvent | 8 | Yes | +----------------------------------+-------------+-----------+ Table 5: NAT44 Session delete/create template 5.6.2. NAT64 create and delete session events These events will be generated when a NAT64 session is created or deleted. The following is a template of the event. +----------------------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +----------------------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | vlanID/ingressVRFID | 32 | No | | sourceIPv6Address | 128 | Yes | | postNATSourceIPv4Address | 32 | Yes | | protocolIdentifier | 8 | Yes | | sourceTransportPort | 16 | Yes | | postNAPTsourceTransportPort | 16 | Yes | | destinationIPv6Address | 128 | No | | postNATDestinationIPv4Address | 32 | No | | destinationTransportPort | 16 | No | | postNAPTdestinationTransportPort | 16 | No | | internalAddressRealm | 8 | No | | externalAddressRealm | 8 | No | | natEvent | 8 | Yes | +----------------------------------+-------------+-----------+ Table 6: NAT64 session create/delete event template Sivakumar & Penno Expires August 15, 2014 [Page 10] Internet-Draft IPFIX IEs for NAT logging February 2014 5.6.3. NAT44 BIB create and delete events These events will be generated when a NAT44 Bind entry is created or deleted. The following is a template of the event. +-----------------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-----------------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | vlanID/ingressVRFID | 32 | No | | sourceIPv4Address | 32 | Yes | | postNATSourceIPv4Address | 32 | Yes | | protocolIdentifier | 8 | No | | sourceTransportPort | 16 | No | | postNAPTsourceTransportPort | 16 | No | | internalAddressRealm | 8 | No | | externalAddressRealm | 8 | No | | natEvent | 8 | Yes | +-----------------------------+-------------+-----------+ Table 7: NAT44 BIB create/delete event template 5.6.4. NAT64 BIB create and delete events These events will be generated when a NAT64 Bind entry is created or deleted. The following is a template of the event. +-----------------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-----------------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | vlanID/ingressVRFID | 32 | No | | sourceIPv6Address | 128 | Yes | | postNATSourceIPv4Address | 32 | Yes | | protocolIdentifier | 8 | No | | sourceTransportPort | 16 | No | | postNAPTsourceTransportPort | 16 | No | | internalAddressRealm | 8 | No | | externalAddressRealm | 8 | No | | natEvent | 8 | Yes | +-----------------------------+-------------+-----------+ Table 8: NAT64 BIB create/delete event template Sivakumar & Penno Expires August 15, 2014 [Page 11] Internet-Draft IPFIX IEs for NAT logging February 2014 5.6.5. Addresses Exhausted event This event will be generated when a NAT device runs out of global IPv4 addresses in a given pool of addresses. Typically, this event would mean that the NAT device wont be able to create any new translations until some addresses/ports are freed. This event SHOULD be rate limited as many packets hitting the device at the same time will trigger a burst of addresses exhausted events. The following is a template of the event. Note that either the NAT pool name or the nat pool identifier should be logged, but not both. +---------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +---------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natPoolID | 32 | Yes | +---------------+-------------+-----------+ Table 9: Address Exhausted event template 5.6.6. Ports Exhausted event This event will be generated when a NAT device runs out of ports for a global IPv4 address. Port exhaustion shall be reported per protocol (UDP, TCP etc). This event SHOULD be rate limited as many packets hitting the device at the same time will trigger a burst of port exhausted events. The following is a template of the event. +--------------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +--------------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | postNATSourceIPv4Address | 32 | Yes | | protocolIdentifier | 8 | Yes | +--------------------------+-------------+-----------+ Table 10: Ports Exhausted event template Sivakumar & Penno Expires August 15, 2014 [Page 12] Internet-Draft IPFIX IEs for NAT logging February 2014 5.6.7. Quota exceeded events This event will be generated when a NAT device cannot allocate resources as a result of an administratively defined policy. The quota exceeded event templates are described below 5.6.7.1. Maximum session entries exceeded The maximum session entries exceeded is generated when the administratively configured limit is reached. The following is the template of the event. +-----------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-----------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natLimitEvent | 32 | Yes | | configuredLimit | 32 | Yes | +-----------------+-------------+-----------+ Table 11: Session Entries Exceeded event template 5.6.7.2. Maximum BIB entries exceeded The maximum BIB entries exceeded is generated when the administratively configured limit is reached. The following is the template of the event. +-----------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-----------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natLimitEvent | 32 | Yes | | configuredLimit | 32 | Yes | +-----------------+-------------+-----------+ Table 12: BIB Entries Exceeded event template 5.6.7.3. Maximum entries per user exceeded This event is generated when a single user reaches the administratively configured limit. The following is the template of the event. Sivakumar & Penno Expires August 15, 2014 [Page 13] Internet-Draft IPFIX IEs for NAT logging February 2014 +---------------------+-------------+---------------+ | Field Name | Size (bits) | Mandatory | +---------------------+-------------+---------------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natLimitEvent | 32 | Yes | | configuredLimit | 32 | Yes | | vlanID/ingressVRFID | 32 | No | | sourceIPv4 address | 32 | Yes for NAT44 | | sourceIPv6 address | 128 | Yes for NAT64 | +---------------------+-------------+---------------+ Table 13: Per-user Entries Exceeded event template 5.6.7.4. Maximum active host or subscribers exceeded This event is generated when the number of allowed hosts or subscribers reaches the administratively configured limit. The following is the template of the event. +-----------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-----------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natLimitEvent | 32 | Yes | | configuredLimit | 32 | Yes | +-----------------+-------------+-----------+ Table 14: Maximum hosts/subscribers Exceeded event template 5.6.7.5. Maximum fragments pending reassembly exceeded This event is generated when the number of fragments pending reassembly reaches the administratively configured limit. The following is the template of the event. Sivakumar & Penno Expires August 15, 2014 [Page 14] Internet-Draft IPFIX IEs for NAT logging February 2014 +----------------------+-------------+---------------+ | Field Name | Size (bits) | Mandatory | +----------------------+-------------+---------------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natLimitEvent | 32 | Yes | | configuredLimit | 32 | Yes | | internalAddressRealm | 8 | Yes | | vlanID/ingressVRFID | 32 | No | | sourceIPv4 address | 32 | Yes for NAT44 | | sourceIPv6 address | 128 | Yes for NAT64 | +----------------------+-------------+---------------+ Table 15: Maximum fragments pending reassembly Exceeded event template 5.6.8. Threshold reached events This event will be generated when a NAT device reaches a operator configured threshold when allocating resources. The threshold reached events are described in the section above. The following is a template of the individual events. 5.6.8.1. Address pool high or low threshold reached This event is generated when the high or low threshold is reached for the address pool. The template is the same for both high and low threshold events +-------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natThresholdEvent | 32 | Yes | | natPoolID | 32 | Yes | | configuredLimit | 32 | Yes | +-------------------+-------------+-----------+ Table 16: Address pool high/low threshold reached event template 5.6.8.2. Address and port high threshold reached This event is generated when the high threshold is reached for the address pool and ports. Sivakumar & Penno Expires August 15, 2014 [Page 15] Internet-Draft IPFIX IEs for NAT logging February 2014 +-------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +-------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natThresholdEvent | 32 | Yes | | configuredLimit | 32 | Yes | +-------------------+-------------+-----------+ Table 17: Address port high threshold reached event template 5.6.8.3. Per-user Address and port high threshold reached This event is generated when the high threshold is reached for the per-user address pool and ports. +---------------------+-------------+---------------+ | Field Name | Size (bits) | Mandatory | +---------------------+-------------+---------------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natThresholdEvent | 32 | Yes | | configuredLimit | 32 | Yes | | vlanID/ingressVRFID | 32 | No | | sourceIPv4 address | 32 | Yes for NAT44 | | sourceIPv6 address | 128 | Yes for NAT64 | +---------------------+-------------+---------------+ Table 18: Per-user Address port high threshold reached event template 5.6.8.4. Global Address mapping high threshold reached This event is generated when the high is reached for the per-user address pool and ports. This is generated only by NAT devices that use a address pooling behavior of paired. Sivakumar & Penno Expires August 15, 2014 [Page 16] Internet-Draft IPFIX IEs for NAT logging February 2014 +---------------------+-------------+-----------+ | Field Name | Size (bits) | Mandatory | +---------------------+-------------+-----------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | natThresholdEvent | 32 | Yes | | configuredLimit | 32 | Yes | | vlanID/ingressVRFID | 32 | No | +---------------------+-------------+-----------+ Table 19: Global Address mapping high threshold reached event template 5.6.9. Address binding create and delete events These events will be generated when a NAT device binds a local address with a global address and when the global address is freed. This binding event happens when the first packet of the first flow from a host in the private realm. +--------------------------------+-------------+---------------+ | Field Name | Size (bits) | Mandatory | +--------------------------------+-------------+---------------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | sourceIPv4 address | 32 | Yes for NAT44 | | sourceIPv6 address | 128 | Yes for NAT64 | | Translated Source IPv4 Address | 32 | Yes | +--------------------------------+-------------+---------------+ Table 20: NAT Address Binding template 5.6.10. Port block allocation and de-allocation This event will be generated when a NAT device allocates/de-allocates ports in a bulk fashion, as opposed to allocating a port on a per flow basis. portRangeStart represents the starting value of the range. portRangeEnd represents the ending value of the range. NAT devices would do this in order to reduce logs and potentially to limit the number of connections a subscriber is allowed to use. In the following Port Block allocation template, the portRangeStart and portRangeEnd must be specified. Sivakumar & Penno Expires August 15, 2014 [Page 17] Internet-Draft IPFIX IEs for NAT logging February 2014 It is up to the implementation to choose to consolidate log records in case two consecutive port ranges for the same user are allocated or freed. +--------------------------------+-------------+---------------+ | Field Name | Size (bits) | Mandatory | +--------------------------------+-------------+---------------+ | timeStamp | 64 | Yes | | natInstanceID | 32 | No | | natEvent | 8 | Yes | | sourceIPv4 address | 32 | Yes for NAT44 | | sourceIPv6 address | 128 | Yes for NAT64 | | Translated Source IPv4 Address | 32 | Yes | | portRangeStart | 16 | Yes | | portRangeEnd | 16 | No | +--------------------------------+-------------+---------------+ Table 21: NAT Port Block Allocation event template 6. Encoding 6.1. IPFIX This document uses IPFIX as the encoding mechanism to describe the logging of NAT events. However, the information that should be logged SHOULD be the same irrespective of what kind of encoding scheme is used. IPFIX is chosen because is it an IETF standard that meets all the needs for a reliable logging mechanism. IPFIX provides the flexibility to the logging device to define the data sets that it is logging. The IEs specified for logging MUST be the same irrespective of the encoding mechanism used. 7. Acknowledgements Thanks to Dan Wing, Selvi Shanmugam, Mohamed Boucadir, Jacni Qin Ramji Vaithianathan, Simon Perreault, Jean-Francois Tremblay, Paul Aitken and Julia Renouard for their review and comments. 8. IANA Considerations The following information elements are requested from IANA IPFIX registry. natInstanceId externalAddressRealm natLimitEvent Sivakumar & Penno Expires August 15, 2014 [Page 18] Internet-Draft IPFIX IEs for NAT logging February 2014 9. Management Considerations This section considers requirements for management of the log system to support logging of the events described above. It first covers requirements applicable to log management in general. Any additional standardization required to fullfil these requirements is out of scope of the present document. Some management considerations is covered in [I-D.behave-syslog-nat-logging]. This document covers the additional considerations. 9.1. Ability to collect events from multiple NAT devices An IPFIX collector should be able to collect events from multiple NAT devices and be able to decipher events based on the sourceID in the IPFIX header. 9.2. Ability to suppress events The exhaustion events can be overwhelming during traffic bursts and hence should be handled by the NAT devices to rate limit them before sending them to the collectors. For eg. when the port exhaustion happens during bursty conditions, instead of sending a port exhaustion event for every packet, the exhaustion events should be rate limited by the NAT device. 10. Security Considerations None. 11. References 11.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2663] Srisuresh, P. and M. Holdrege, "IP Network Address Translator (NAT) Terminology and Considerations", RFC 2663, August 1999. [RFC4787] Audet, F. and C. Jennings, "Network Address Translation (NAT) Behavioral Requirements for Unicast UDP", BCP 127, RFC 4787, January 2007. [RFC5382] Guha, S., Biswas, K., Ford, B., Sivakumar, S., and P. Srisuresh, "NAT Behavioral Requirements for TCP", BCP 142, RFC 5382, October 2008. Sivakumar & Penno Expires August 15, 2014 [Page 19] Internet-Draft IPFIX IEs for NAT logging February 2014 [RFC6146] Bagnulo, M., Matthews, P., and I. van Beijnum, "Stateful NAT64: Network Address and Protocol Translation from IPv6 Clients to IPv4 Servers", RFC 6146, April 2011. [RFC6302] Durand, A., Gashinsky, I., Lee, D., and S. Sheppard, "Logging Recommendations for Internet-Facing Servers", BCP 162, RFC 6302, June 2011. [RFC6888] Perreault, S., Yamagata, I., Miyakawa, S., Nakagawa, A., and H. Ashida, "Common Requirements for Carrier-Grade NATs (CGNs)", BCP 127, RFC 6888, April 2013. 11.2. Informative References [I-D.ietf-behave-syslog-nat-logging] Chen, Z., Zhou, C., Tsou, T., and T. Taylor, "Syslog Format for NAT Logging", draft-ietf-behave-syslog-nat- logging-06 (work in progress), January 2014. [IPFIX-IANA] IANA, "IPFIX Information Elements registry", . [RFC5101bis] Claise, B. and B. Trammel, "Specification of the IP Flow Information eXport (IPFIX) Protocol for the Exchange of Flow Information", July 2013. [RFC5102bis] Claise, B. and B. Trammel, "Information Model for IP Flow Information eXport (IPFIX)", February 2013. [RFC5470] Sadasivan, G., Brownlee, N., Claise, B., and J. Quittek, "Architecture for IP Flow Information Export", RFC 5470, March 2009. Authors' Addresses Senthil Sivakumar Cisco Systems 7100-8 Kit Creek Road Research Triangle Park, North Carolina 27709 USA Phone: +1 919 392 5158 Email: ssenthil@cisco.com Sivakumar & Penno Expires August 15, 2014 [Page 20] Internet-Draft IPFIX IEs for NAT logging February 2014 Renaldo Penno Cisco Systems 170 W Tasman Drive San Jose, California 95035 USA Email: repenno@cisco.com Sivakumar & Penno Expires August 15, 2014 [Page 21]