Network Working Group C. Daboo Internet-Draft Apple Intended status: Standards Track June 9, 2012 Expires: December 11, 2012 VALARM Extensions for iCalendar draft-daboo-valarm-extensions-04 Abstract This document defines a set of extensions to the iCalendar VALARM component to enhance use of alarms and improve interoperability between clients and servers. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on December 11, 2012. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Daboo Expires December 11, 2012 [Page 1] Internet-Draft VALARM Extensions June 2012 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Conventions Used in This Document . . . . . . . . . . . . . . 3 3. Extensible syntax for VALARM . . . . . . . . . . . . . . . . . 3 4. Alarm Unique Identifier . . . . . . . . . . . . . . . . . . . 5 5. Alarm Related To . . . . . . . . . . . . . . . . . . . . . . . 6 6. Alarm URI Action . . . . . . . . . . . . . . . . . . . . . . . 6 7. Alarm Agent . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.1. Alarm Agent Property . . . . . . . . . . . . . . . . . . . 8 7.2. Agent ID Property Parameter . . . . . . . . . . . . . . . 9 8. Alarm Acknowledgement . . . . . . . . . . . . . . . . . . . . 10 8.1. Acknowledged Property . . . . . . . . . . . . . . . . . . 10 9. Snoozing Alarms . . . . . . . . . . . . . . . . . . . . . . . 12 9.1. Relationship Type Property Parameter . . . . . . . . . . . 12 10. Alarm Proximity Trigger . . . . . . . . . . . . . . . . . . . 12 10.1. Proximity Property . . . . . . . . . . . . . . . . . . . . 13 10.2. Example . . . . . . . . . . . . . . . . . . . . . . . . . 14 11. Default Alarms in CalDAV . . . . . . . . . . . . . . . . . . . 15 11.1. Server Behavior . . . . . . . . . . . . . . . . . . . . . 15 11.2. Client Behavior . . . . . . . . . . . . . . . . . . . . . 16 11.3. Action None . . . . . . . . . . . . . . . . . . . . . . . 17 11.4. Default Alarm Property . . . . . . . . . . . . . . . . . . 18 12. Security Considerations . . . . . . . . . . . . . . . . . . . 19 13. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 19 13.1. Property Registrations . . . . . . . . . . . . . . . . . . 19 13.2. Parameter Registrations . . . . . . . . . . . . . . . . . 20 13.3. Actions Registry . . . . . . . . . . . . . . . . . . . . . 20 13.4. Relationship Types Registry . . . . . . . . . . . . . . . 20 13.5. Proximity Value Registry . . . . . . . . . . . . . . . . . 20 14. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 21 15. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21 15.1. Normative References . . . . . . . . . . . . . . . . . . . 21 15.2. Informative References . . . . . . . . . . . . . . . . . . 21 Appendix A. Change History (To be removed by RFC Editor before publication) . . . . . . . . . . . . . . . . . 21 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 23 Daboo Expires December 11, 2012 [Page 2] Internet-Draft VALARM Extensions June 2012 1. Introduction The iCalendar [RFC5545] specification defines a set of components used to describe calendar data. One of those is the "VALARM" component which appears as a sub-component of "VEVENT" and "VTODO" components. The "VALARM" component is used to specify a reminder for an event or to-do. Different alarm actions are possible, as are different ways to specify how the alarm is triggered. As iCalendar has become more widely used and as client-server protocols such as CalDAV [RFC4791] have become more popular, several issues with "VALARM" components have arisen. Most of these relate to the need to extend the existing "VALARM" component with new properties and behaviors to allow clients and servers to accomplish specific tasks in an interoperable manner. For example, clients typically need a way to specify that an alarm has been dismissed by a calendar user, or has been "snoozed" by a set amount of time. To date, this has been done through the use of custom "X-" properties specific to each client implementation, leading to poor interoperability. This specification defines a set of extensions to "VALARM" components to cover common requirements for alarms not currently addressed in iCalendar. Each extension is defined in a separate section below. For the most part, each extension can be supported independently of the others, though in some cases one extension will require another. In addition, this specification describes mechanisms by which clients can interoperably implement common features such as "snoozing". 2. Conventions Used in This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. When XML element types in the namespaces "DAV:" and "urn:ietf:params:xml:ns:caldav" are referenced in this document outside of the context of an XML fragment, the string "DAV:" and "CALDAV:" will be prefixed to the element type names respectively. 3. Extensible syntax for VALARM Section 3.6.6 of [RFC5545]defines the syntax for "VALARM" components and properties within them. However, as written, it is hard to extend this by adding, e.g., a new property common to all types of Daboo Expires December 11, 2012 [Page 3] Internet-Draft VALARM Extensions June 2012 alarm. Since many of the extensions defined in this document need to extend the base syntax, an alternative form for the base syntax is defined here, with the goal of simplifying specification of the extensions. A "VALARM" calendar component is re-defined by the following notation: alarmcext = "BEGIN" ":" "VALARM" CRLF alarmprop "END" ":" "VALARM" CRLF alarmprop = *( ; the following are REQUIRED, ; but MUST NOT occur more than once action / trigger / ; one set of action properties MUST be ; present and MUST match the action specified ; in the ACTION property actionprops / ; the following is OPTIONAL, ; and MAY occur more than once x-prop / iana-prop ) actionprops = audiopropext / disppropext / emailpropext audiopropext = *( ; 'duration' and 'repeat' are both OPTIONAL, ; and MUST NOT occur more than once each, ; but if one occurs, so MUST the other duration / repeat / ; the following is OPTIONAL, ; but MUST NOT occur more than once attach ) Daboo Expires December 11, 2012 [Page 4] Internet-Draft VALARM Extensions June 2012 disppropext = *( ; the following are REQUIRED, ; but MUST NOT occur more than once description / ; 'duration' and 'repeat' are both OPTIONAL, ; and MUST NOT occur more than once each, ; but if one occurs, so MUST the other duration / repeat ) emailpropext = *( ; the following are all REQUIRED, ; but MUST NOT occur more than once description / summary / ; the following is REQUIRED, ; and MAY occur more than once attendee / ; 'duration' and 'repeat' are both OPTIONAL, ; and MUST NOT occur more than once each, ; but if one occurs, so MUST the other duration / repeat ) 4. Alarm Unique Identifier Several of the other extensions in this specification require identifying a specific instance of a "VALARM" component in an iCalendar stream. To aid that, this extension adds a "UID" property to "VALARM" components to allow a unique identifier to specified. The value of this property can then be used to refer uniquely to the "VALARM" component. The "UID" property defined here follows the definition in Section 3.8.4.7 of [RFC5545]. In particular it MUST be a globally unique identifier. Daboo Expires December 11, 2012 [Page 5] Internet-Draft VALARM Extensions June 2012 The "VALARM" component defined in Section 3 is extended here as: alarmprop /= *( ; the following is OPTIONAL, ; but MUST NOT occur more than once uid ) 5. Alarm Related To It is often convenient to relate one or more "VALARM" components to other "VALARM" components (e.g., see Section 9). This can be accomplished if the "VALARM" components each have their own "UID" property (as per Section 4). This specification updates the usage of the "RELATED-TO" property defined in Section 3.8.4.5 of [RFC5545] to enable its use with "VALARM" components. Specific types of relationships between "VALARM" components can be identified by registering new values for the "RELTYPE" property parameter defined in Section 3.2.15 of [RFC5545]. The "VALARM" component defined in Section 3 is extended here as: alarmprop /= *( ; the following is OPTIONAL, ; but MAY occur more than once related ) 6. Alarm URI Action Currently "VALARM" components have actions for audio, display and email. New types of action are of interest, e.g., SMS, instant messaging, etc. Rather then specify separate actions for these, an alternative is to define a "URI" action that allows any URI scheme to be used as an action, where it makes sense. Thus URI schemes for IM [RFC3860], SIP [RFC3261], TEL [RFC3966]etc could be used. This extension defines a new "URI" property value for use with the Daboo Expires December 11, 2012 [Page 6] Internet-Draft VALARM Extensions June 2012 "ACTION" property in "VALARM" components. A new set of action properties is defined for "VALARM" components based on this new action as defined by the syntax below. actionvalue /= "URI" ; Adds a new action for a "VALARM" actionprop /= uriprop ; Re-defines the "VALARM" component to include ; "uriprop" as a new set of action properties uriprop = *( ; the following is REQUIRED, ; and MUST occur only once uri / ; 'duration' and 'repeat' are both OPTIONAL, ; and MUST NOT occur more than once each, ; but if one occurs, so MUST the other duration / repeat ) 7. Alarm Agent With the advent of a standard client/server protocol for calendaring and scheduling data ([RFC4791]) there is a need to specify which client or server should handle the presentation of an alarm when it is triggered. For example, calendar users want to be able to receive alarms at all times, even when their desktop client might be unavailable. Since the server is "always on", a service running on the server could monitor alarm status and, when appropriate, trigger those alarms. In addition it may be important for only the server or the client to be set to handle an alarm - and in some cases only specific servers or clients. To address this need, this specification defines an "ALARM-AGENT" iCalendar property that can be added to any "VALARM" component. This property specifies whether a client or server or both should be responsible for processing the alarm when it triggers. In addition, an "AGENT-ID" property parameter can be added to uniquely identify the client or server that should process the alarm. This is defined by the syntax below. Daboo Expires December 11, 2012 [Page 7] Internet-Draft VALARM Extensions June 2012 alarmprop /= *( ; the following is OPTIONAL, ; and MAY occur more than once alarm-agent ) 7.1. Alarm Agent Property Property Name: ALARM-AGENT Purpose: This property specifies whether a client, server, both or none gets to process an alarm when it is triggered. Value Type: TEXT Property Parameters: IANA, non-standard, and id property parameters can be specified on this property. Conformance: This property can be specified within "VALARM" calendar components. Description: This property is used to specify who is responsible for processing an alarm when it is triggered. When the value "SERVER" is specified, only a server that has a copy of the event is responsible. When the value "CLIENT" is specified, only a client that has a copy of the event is responsible. When the value "BOTH" is specified, either a client or server is responsible. When the value "NONE" is specified, neither a client nor server is responsible (i.e., the alarm action is never carried out when it triggers). If the "AGENT-ID" property parameter is specified for "SERVER" or "CLIENT" values, then only the client or server identified by the "AGENT-ID" value is responsible. Clients or servers that are not responsible for the alarm SHOULD NOT process the alarm action when it is triggered. If multiple clients or servers need to be specified, then the "ALARM-AGENT" property should be included multiple times in the "VALARM" component, with each one containing the appropriate "AGENT-ID" property parameter value to identify each client or server. In the absence of this property clients and servers can choose to process the alarm themselves as appropriate. i.e., a default value of "BOTH". Daboo Expires December 11, 2012 [Page 8] Internet-Draft VALARM Extensions June 2012 This property MAY occur more than once to allow multiple processors of an alarm. Format Definition: This property is defined by the following notation: alarm-agent = "ALARM-AGENT" alarmagentparam ":" alarmagentvalue CRLF alarmagentparam = *( ; the following is OPTIONAL, ; but MUST NOT occur more than once (";" agentidparam) / ; the following is OPTIONAL, ; and MAY occur more than once (";" other-param) ) alarmagentvalue = "SERVER" / "CLIENT" / "BOTH" / "NONE" / iana-token / x-name Example: The following are examples of this property: ALARM-AGENT:SERVER ALARM-AGENT;AGENT-ID="tag:example.com,2011:cyrus-desktop":CLIENT 7.2. Agent ID Property Parameter Parameter Name: AGENT-ID Purpose: This property parameter specifies a URI identifier for the property it is applied to. Format Definition: This property parameter is defined by the following notation: agentidparam = "AGENT-ID" "=" DQUOTE uri DQUOTE Description: This property parameter is used to specify a URI identifier that is associated with the property it is applied to. Each property that allows this parameter to be specified MUST indicate what the value of the URI represents. Daboo Expires December 11, 2012 [Page 9] Internet-Draft VALARM Extensions June 2012 Example: The following is an example of this property parameter: ALARM-AGENT;AGENT-ID="http://calendar.example.com":SERVER 8. Alarm Acknowledgement There is currently no way for a "VALARM" component to indicate whether it has been triggered and acknowledged. With the advent of a standard client/server protocol for calendaring and scheduling data ([RFC4791]) it is quite possible for an event with an alarm to exist on multiple clients in addition to the server. If each of those is responsible for performing the action when an alarm triggers, then multiple "alerts" are generated by different devices. In such a situation, a calendar user would like to be able to "dismiss" the alarm on one device and have it automatically dismissed on the others too. Also, with recurring events that have alarms, it is important to know when the last alarm in the recurring set was acknowledged, so that the client can determine whether past alarms have been missed. To address these needs, this specification adds an "ACKNOWLEDGED" property to "VALARM" components to indicate when the alarm was last sent or acknowledged. This is defined by the syntax below. alarmprop /= *( ; the following is OPTIONAL, ; but MUST NOT occur more than once acknowledged ) 8.1. Acknowledged Property Property Name: ACKNOWLEDGED Purpose: This property specifies the UTC date and time at which the corresponding alarm was last sent or acknowledged. Value Type: DATE-TIME Property Parameters: IANA and non-standard property parameters can be specified on this property. Daboo Expires December 11, 2012 [Page 10] Internet-Draft VALARM Extensions June 2012 Conformance: This property can be specified within "VALARM" calendar components. Description: This property is used to specify when an alarm was last sent or acknowledged. This allows clients to determine when a pending alarm has been acknowledged by a calendar user so that any alerts can be dismissed across multiple devices. It also allows clients to track repeating alarms or alarms on recurring events or to-dos to ensure that the right number of missed alarms can be tracked. Clients SHOULD set this property to the current date-time value in UTC when a calendar user acknowledges a pending alarm. Certain kinds of alarm may not provide feedback as to when the calendar user sees them, for example email based alerts. For those kinds of alarms, the client SHOULD set this property when the alarm is triggered and the action successfully carried out. When an alarm is triggered on a client, clients can check to see if an "ACKNOWLEDGED" property is present. If it is, and the value of that property is greater than or equal to the computed trigger time for the alarm, then the client SHOULD NOT trigger the alarm. Similarly, if an alarm has been triggered and an "alert" presented to a calendar user, clients can monitor the iCalendar data to determine whether an "ACKNOWLEDGED" is added or changed in the alarm component. If the value of any "ACKNOWLEDGED" in the alarm changes and is greater than or equal to the trigger time of the alarm, then clients SHOULD dismiss or cancel any "alert" presented to the calendar user. Format Definition: This property is defined by the following notation: acknowledged = "ACKNOWLEDGED" acknowledgedparam ":" datetime CRLF acknowledgedparam = *( ; the following is OPTIONAL, ; and MAY occur more than once (";" other-param) ) Daboo Expires December 11, 2012 [Page 11] Internet-Draft VALARM Extensions June 2012 Example: The following is an example of this property: ACKNOWLEDGED:20090604T084500Z 9. Snoozing Alarms Users often want to "snooze" an alarm, and this specification defines a standard approach to accomplish that. To "snooze" an alarm, clients create a new "VALARM" component within the parent component of the "VALARM" that was triggered and is being "snoozed" (i.e., as a "sibling" component of the "VALARM" being snoozed). The new "VALARM" MUST be set to trigger at the user's chosen "snooze" interval after the original alarm triggered. Clients SHOULD use an absolute "TRIGGER" property with a "DATE-TIME" value specified in UTC. Clients SHOULD add a "RELATED-TO" property to the new "VALARM" component with a value set to the "UID" property value of the "VALARM" component being snoozed. If the "VALARM" component being snoozed does not already have a "UID" property, the client SHOULD add one. The "RELATED-TO" property added to the new "VALARM" component SHOULD include a "RELTYPE" property parameter with a value set to "SNOOZE". When the "snooze" alarm is triggered and dismissed the client SHOULD remove the corresponding "VALARM" component, or set the "ACKNOWLEDGED" property (see Section 8.1). Alternatively, if the "snooze" alarm is itself "snoozed", the client SHOULD remove the original "snooze" alarm and create a new one, with the appropriate trigger time and relationship set. 9.1. Relationship Type Property Parameter This specification adds the "SNOOZE" relationship type for use with the "RELTYPE" property defined in Section 3.2.15 of [RFC5545]. This is used to relate a "snoozed" "VALARM" component to the original alarm that the "snooze" was generated for. 10. Alarm Proximity Trigger VALARMs are currently triggered when a specific date-time is reached. It is also desirable to be able to trigger alarms based on location, e.g. when arriving at or departing from a particular location. This specification adds the following properties to "VALARM" components to indicate when an alarm can be triggered based on location. Daboo Expires December 11, 2012 [Page 12] Internet-Draft VALARM Extensions June 2012 "PROXIMITY" - indicates that a location based trigger is to be used and which direction of motion is used for the trigger "STRUCTURED-LOCATION" - used to indicate the actual location to trigger off, specified using a geo: URI [RFC5870] which allows for two or three co-ordinate values with an optional uncertainty alarmprop /= *( ; the following is OPTIONAL, ; but MUST NOT occur more than once proximity / ; the following is OPTIONAL, ; and MAY occur more than once, but only ; when a PROXIMITY property is also present structured-location ) Typically, when a "PROXIMITY" property is used there is no need to specify a time-based trigger using the "TRIGGER" property. However, since "TRIGGER" is defined as a required property for a "VALARM" component, for backwards compatibility it has to be present, but ignored. To indicate a "TRIGGER" that is to be ignored, clients SHOULD use a value a long time in the past. A value of "19760401T005545Z" has been commonly used for that. 10.1. Proximity Property Property Name: PROXIMITY Purpose: This property indicates that a location based trigger is applied to an alarm. Value Type: TEXT Property Parameters: IANA and non-standard property parameters can be specified on this property. Conformance: This property can be specified within "VALARM" calendar components. Daboo Expires December 11, 2012 [Page 13] Internet-Draft VALARM Extensions June 2012 Description: This property is used to indicate that an alarm has a location-based trigger. Its value identifies the direction of motion used to trigger the alarm. One or more location values are set using "STRUCTURED-LOCATION" properties. When the property value is set to "ARRIVE", the alarm is triggered when the calendar user agent arrives in the vicinity of any of the specified locations. When set to "DEPART", the alarm is triggered when the calendar user agent departs from the vicinity of any specified locations. The time-based "TRIGGER" property MUST also be present in the "VALARM" calendar component and MUST be set to a positive duration value (or zero duration). That value indicates a time delay to be applied to the triggering of the alarm after the location trigger is triggered. e.g., an alarm could be set to trigger 30 minutes after arriving home. Format Definition: This property is defined by the following notation: proximity = "PROXIMITY" proximityparam ":" proximityvalue CRLF proximityparam = *( ; the following is OPTIONAL, ; and MAY occur more than once (";" other-param) ) proximityvalue = "ARRIVE" / "DEPART" / iana-token / x-name Example: The following is an example of this property: PROXIMITY:ARRIVE 10.2. Example The following example shows a "VALARM" component with a proximity trigger set to trigger when the device running the calendar user agent leaves the vicinity defined by the structured location property. Note use of the "u=" parameter with the "geo" URI to define the precision of the location determination. Daboo Expires December 11, 2012 [Page 14] Internet-Draft VALARM Extensions June 2012 BEGIN:VALARM UID:77D80D14-906B-4257-963F-85B1E734DBB6 TRIGGER;VALUE=DATE-TIME:19760401T005545Z ACTION:DISPLAY PROXIMITY:DEPART STRUCTURE-LOCATION;VALUE=URI:geo:40.443,-79.945;u=10 DESCRIPTION:Remember to buy milk END:VALARM 11. Default Alarms in CalDAV Users often want to have a default alarm applied to new events that they create or to new invitations that arrive on a CalDAV [RFC4791] server. Since this behavior is expected to occur no matter which client a user is using, or whether any client is even connected at the time, it is beneficial if the server itself is responsible for managing the creation of the default alarm. This specification defines four new WebDAV properties that can be used to specify different sets of default alarms. Clients can store "VALARM" components in these properties to setup the defaults. When a new event or todo is created on the server, the server will automatically add the default, as appropriate. When a new event or todo invitation is delivered to the calendar user, the server will automatically add the default alarm, as appropriate. 11.1. Server Behavior A server supporting the features described in this document MUST include "calendar-default-alarms" as a field in the DAV response header from an OPTIONS request on a calendar home or calendar collection. The four new WebDAV properties are: CALDAV:default-alarm-vevent-datetime A default alarm applied to "VEVENT" components whose "DTSTART" property value type is "DATE- TIME" CALDAV:default-alarm-vevent-date A default alarm applied to "VEVENT" components whose "DTSTART" property value type is "DATE" CALDAV:default-alarm-vtodo-datetime A default alarm applied to "VTODO" components whose "DUE" or "DTSTART" property value type is "DATE-TIME" Daboo Expires December 11, 2012 [Page 15] Internet-Draft VALARM Extensions June 2012 CALDAV:default-alarm-vtodo-date A default alarm applied to "VTODO" components whose "DUE" or "DTSTART" property value type is "DATE", or when neither of those properties is present The WebDAV properties are defined on a calendar user's "calendar home" collection, or on individual calendar collections. When events or tasks are created in a calendar, the server will first inspect the WebDAV properties on the calendar collection to see if the appropriate property is present. If it is, the server will use the value of that property to set the default in the new component. If the property is not present on the calendar collection, the server will determine whether the property is present on the calendar home collection that contains the calendar collection. If present on the calendar home, the property value there is used as the default. The WebDAV property value MUST be one or more "VALARM" components or the empty string. If an empty string is used, no default alarms are applied. Note that these values contain just the "BEGIN: VALARM...END:VALARM" data (i.e., syntactically the "alarmcext" element as per Section 3). When adding a default alarm to an event or task, the server MUST ensure that a "DEFAULT-ALARM" property with a value of "TRUE" is present in the "VALARM" component. If a "DESCRIPTION" property is present in the "VALARM" component, but its value is empty, the server SHOULD insert the value from any "SUMMARY" property of the component in which the default "VALARM" is being added. A default alarm MUST NOT be added to individual event or task components in a calendar object resource being created, if a "VALARM" component is already present in the component. When the client stores a new alarm in any of the WebDAV properties, servers MUST NOT change any existing calendar data within the calendar home or calendar where the WebDAV property is stored. This avoids the server having to rewrite potentially large amounts of calendar data to update the default alarm, and thus avoids the need for clients to re-download that data when they next synchronize with the server. The reasoning for this is described further in the next section. 11.2. Client Behavior Clients that support default alarms SHOULD allow users to set the four types of default provided by the WebDAV properties defined in Section 11.1. Clients SHOULD check for the presence of those Daboo Expires December 11, 2012 [Page 16] Internet-Draft VALARM Extensions June 2012 properties and the calendar user's calendar home and individual calendars and use the values for defaults that they themselves apply. Since existing calendar data with a default alarm is not changed when the default alarm property changes, clients SHOULD do the following: Treat the default alarm values in the WebDAV properties as "overrides" for any alarms appearing in cached calendar data that have the "DEFAULT-ALARM" property set to a value of "TRUE". In effect the client ignores the default alarm in the calendar data and use the current default from the WebDAV properties. When a client updates calendar data on the server, it SHOULD replace any existing default alarms in the calendar data with the latest defaults retrieved from the WebDAV properties. The approach of not having the server rewrite existing calendar data when an alarm changes, and having the client "override" defaults in calendar data with the current default values is a compromise designed to provide some backwards compatibility with clients not supporting default alarm behavior. 11.3. Action None When default alarms are being used it is necessary to know when a calendar user has set a default alarm that does nothing as opposed to specifying that no alarm be used. This is important because clients are expected to "override" any default alarm present in calendar data with the current value retrieved from the server. However, if the calendar user explicitly removed the default alarm, then the "override" does not happen. This extension defines a new "NONE" property value for use with the "ACTION" property in "VALARM" components. A new set of action properties is defined for "VALARM" components based on this new action as defined by the syntax below. The "NONE" action is used solely to indicate a default alarm that does not alert the calendar user. Daboo Expires December 11, 2012 [Page 17] Internet-Draft VALARM Extensions June 2012 actionvalue /= "NONE" ; Adds a new action for a "VALARM" actionprop /= noneprop ; Re-defines the "VALARM" component to include ; "noneprop" as a new set of action properties noneprop = ( ; No properties used ) 11.4. Default Alarm Property Property Name: DEFAULT-ALARM Purpose: This property indicates that an alarm is a default alarm. Value Type: BOOLEAN Property Parameters: IANA, and non-standard property parameters can be specified on this property. Conformance: This property can be specified within "VALARM" calendar components. Description: This property is used to indicate that a "VALARM" component is a default alarm. Format Definition: This property is defined by the following notation: Daboo Expires December 11, 2012 [Page 18] Internet-Draft VALARM Extensions June 2012 alarmprop /= *( ; the following is OPTIONAL, ; but MUST NOT occur more than once default-alarm ) default-alarm = "DEFAULT-ALARM" defaultalarmparam ":" boolean CRLF defaultalarmparam = *( ; the following is OPTIONAL, ; and MAY occur more than once (";" other-param) ) 12. Security Considerations TODO:talk about importance of stripping VALARMs from incoming iTIP. Talk about VALARMs being used to "spam" - particularly nasty if the server handles it. 13. IANA Considerations 13.1. Property Registrations This document defines the following new iCalendar properties to be added to the registry defined in Section 8.2.3 of [RFC5545]: +---------------+---------+-----------------------+ | Property | Status | Reference | +---------------+---------+-----------------------+ | ALARM-AGENT | Current | RFCXXXX, Section 7.1 | | ACKNOWLEDGED | Current | RFCXXXX, Section 8.1 | | PROXIMITY | Current | RFCXXXX, Section 10.1 | | DEFAULT-ALARM | Current | RFCXXXX, Section 11.4 | +---------------+---------+-----------------------+ Daboo Expires December 11, 2012 [Page 19] Internet-Draft VALARM Extensions June 2012 13.2. Parameter Registrations This document defines the following new iCalendar property parameters to be added to the registry defined in Section 8.2.4 of [RFC5545]: +--------------------+---------+----------------------+ | Property Parameter | Status | Reference | +--------------------+---------+----------------------+ | AGENT-ID | Current | RFCXXXX, Section 7.2 | +--------------------+---------+----------------------+ 13.3. Actions Registry This document defines the following new iCalendar action to be added to the registry defined in Section 8.3.10 of [RFC5545]: +--------+---------+-----------------------+ | Action | Status | Reference | +--------+---------+-----------------------+ | URI | Current | RFCXXXX, Section 6 | | NONE | Current | RFCXXXX, Section 11.3 | +--------+---------+-----------------------+ 13.4. Relationship Types Registry This document defines the following new iCalendar relationship type to be added to the registry defined in Section 8.3.8 of [RFC5545]: +-------------------+---------+----------------------+ | Relationship Type | Status | Reference | +-------------------+---------+----------------------+ | SNOOZE | Current | RFCXXXX, Section 9.1 | +-------------------+---------+----------------------+ 13.5. Proximity Value Registry This document creates a new iCalendar registry for values of the "PROXIMITY" property: +--------+---------+-----------------------+ | Value | Status | Reference | +--------+---------+-----------------------+ | ARRIVE | Current | RFCXXXX, Section 10.1 | | DEPART | Current | RFCXXXX, Section 10.1 | +--------+---------+-----------------------+ Daboo Expires December 11, 2012 [Page 20] Internet-Draft VALARM Extensions June 2012 14. Acknowledgments This specification came about via discussions at the Calendaring and Scheduling Consortium. Also, thanks to the following for providing feedback: Bernard Desruisseaux, Mike Douglass, Jacob, Farkas, Jeffrey Harris, and Ciny Joy. 15. References 15.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC4791] Daboo, C., Desruisseaux, B., and L. Dusseault, "Calendaring Extensions to WebDAV (CalDAV)", RFC 4791, March 2007. [RFC5545] Desruisseaux, B., "Internet Calendaring and Scheduling Core Object Specification (iCalendar)", RFC 5545, September 2009. [RFC5870] Mayrhofer, A. and C. Spanring, "A Uniform Resource Identifier for Geographic Locations ('geo' URI)", RFC 5870, June 2010. 15.2. Informative References [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. [RFC3860] Peterson, J., "Common Profile for Instant Messaging (CPIM)", RFC 3860, August 2004. [RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966, December 2004. Appendix A. Change History (To be removed by RFC Editor before publication) Changes in -04: 1. Changed "ID" to "AGENT-ID". Daboo Expires December 11, 2012 [Page 21] Internet-Draft VALARM Extensions June 2012 2. Add more text on using "ACKNOWLEDGED" property. 3. Add "RELATED-TO" as a valid property for VALARMs. 4. Add "SNOOZE" relationship type for use with VALARMs. 5. State that "TRIGGER" is typically ignored in proximity alarms. 6. Added "PROXIMITY" value registry. 7. Added a lot more detail on default alarms including new action and property. Changes in -03: none - resubmission of -02 Changes in -02: 1. Updated to 5545 reference. 2. Clarified use of absolute trigger in UTC in snooze alarms 3. Snooze alarms should be removed when completed 4. Removed status and replaced last-triggered by acknowledged property 5. Added location-based trigger 6. IANA registry tables added Changes in -01: 1. Removed DESCRIPTION as an allowed property in the URI alarm. 2. Added statement about what to do when ALARM-AGENT is not present. 3. Allow multiple ALARM-AGENT properties to be present. 4. Removed SNOOZE-UNTIL - snoozing now accomplished by creating a new VALARM. 5. Remove VALARM by reference section. 6. Added more detail to CalDAV default alarms. Daboo Expires December 11, 2012 [Page 22] Internet-Draft VALARM Extensions June 2012 Author's Address Cyrus Daboo Apple Inc. 1 Infinite Loop Cupertino, CA 95014 USA Email: cyrus@daboo.name URI: http://www.apple.com/ Daboo Expires December 11, 2012 [Page 23]