Internet Engineering Task Force (IETF) H. Birkholz Request for Comments: 8610 Fraunhofer SIT Category: Standards Track C. Vigano ISSN: 2070-1721 Universitaet Bremen C. Bormann Universitaet Bremen TZI June 2019 Concise Data Definition Language (CDDL): A Notational Convention to Express Concise Binary Object Representation (CBOR) and JSON Data Structures Abstract This document proposes a notational convention to express Concise Binary Object Representation (CBOR) data structures (RFC 7049). Its main goal is to provide an easy and unambiguous way to express structures for protocol messages and data formats that use CBOR or JSON. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8610. Birkholz, et al. Standards Track [Page 1] RFC 8610 CDDL June 2019 Copyright Notice Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction ....................................................4 1.1. Requirements Notation ......................................5 1.2. Terminology ................................................5 2. The Style of Data Structure Specification .......................5 2.1. Groups and Composition in CDDL .............................7 2.1.1. Usage ..............................................10 2.1.2. Syntax .............................................10 2.2. Types .....................................................11 2.2.1. Values .............................................11 2.2.2. Choices ............................................11 2.2.3. Representation Types ...............................13 2.2.4. Root Type ..........................................14 3. Syntax .........................................................15 3.1. General Conventions .......................................15 3.2. Occurrence ................................................16 3.3. Predefined Names for Types ................................17 3.4. Arrays ....................................................18 3.5. Maps ......................................................19 3.5.1. Structs ............................................19 3.5.2. Tables .............................................22 3.5.3. Non-deterministic Order ............................23 3.5.4. Cuts in Maps .......................................24 3.6. Tags ......................................................25 3.7. Unwrapping ................................................26 3.8. Controls ..................................................27 3.8.1. Control Operator .size .............................27 3.8.2. Control Operator .bits .............................28 3.8.3. Control Operator .regexp ...........................29 Birkholz, et al. Standards Track [Page 2] RFC 8610 CDDL June 2019 3.8.4. Control Operators .cbor and .cborseq ...............30 3.8.5. Control Operators .within and .and .................30 3.8.6. Control Operators .lt, .le, .gt, .ge, .eq, .ne, and .default ..................................31 3.9. Socket/Plug ...............................................32 3.10. Generics .................................................33 3.11. Operator Precedence ......................................34 4. Making Use of CDDL .............................................36 4.1. As a Guide for a Human User ...............................36 4.2. For Automated Checking of CBOR Data Structures ............36 4.3. For Data Analysis Tools ...................................37 5. Security Considerations ........................................37 6. IANA Considerations ............................................38 6.1. CDDL Control Operators Registry ...........................38 7. References .....................................................40 7.1. Normative References ......................................40 7.2. Informative References ....................................41 Appendix A. Parsing Expression Grammars (PEGs) ....................43 Appendix B. ABNF Grammar ..........................................45 Appendix C. Matching Rules ........................................47 Appendix D. Standard Prelude ......................................52 Appendix E. Use with JSON .........................................53 Appendix F. A CDDL Tool ...........................................56 Appendix G. Extended Diagnostic Notation ..........................56 G.1. Whitespace in Byte String Notation .........................57 G.2. Text in Byte String Notation ...............................57 G.3. Embedded CBOR and CBOR Sequences in Byte Strings ...........57 G.4. Concatenated Strings .......................................58 G.5. Hexadecimal, Octal, and Binary Numbers .....................59 G.6. Comments ...................................................59 Appendix H. Examples ..............................................60 Acknowledgements ..................................................63 Contributors ......................................................63 Authors' Addresses ................................................64 Birkholz, et al. Standards Track [Page 3] RFC 8610 CDDL June 2019 1. Introduction In this document, a notational convention to express Concise Binary Object Representation (CBOR) data structures [RFC7049] is defined. The main goal for the convention is to provide a unified notation that can be used when defining protocols that use CBOR. We term the convention "Concise Data Definition Language", or CDDL. The CBOR notational convention has the following goals: (G1) Provide an unambiguous description of the overall structure of a CBOR data item. (G2) Be flexible in expressing the multiple ways in which data can be represented in the CBOR data format. (G3) Be able to express common CBOR datatypes and structures. (G4) Provide a single format that is both readable and editable for humans and processable by a machine. (G5) Enable automatic checking of CBOR data items for data format compliance. (G6) Enable extraction of specific elements from CBOR data for further processing. Not an original goal per se, but a convenient side effect of the JSON generic data model being a subset of the CBOR generic data model, is the fact that CDDL can also be used for describing JSON data structures (see Appendix E). This document has the following structure: The syntax of CDDL is defined in Section 3. Examples of CDDL and a related CBOR data item ("instance"), some of which use the JSON form, are described in Appendix H. Section 4 discusses usage of CDDL. Examples are provided throughout the text to better illustrate concept definitions. A formal definition of CDDL using ABNF grammar [RFC5234] is provided in Appendix B. Finally, a _prelude_ of standard CDDL definitions that is automatically prepended to, and thus available in, every CDDL specification is listed in Appendix D. Birkholz, et al. Standards Track [Page 4] RFC 8610 CDDL June 2019 1.1. Requirements Notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 1.2. Terminology New terms are introduced in _cursive_, which is rendered in plain text as the new term surrounded by underscores. CDDL text in the running text is in "typewriter", which is rendered in plain text as the CDDL text in double quotes (double quotes are also used in the usual English sense; the reader is expected to disambiguate this by context). In this specification, the term "byte" is used in its now-customary sense as a synonym for "octet". 2. The Style of Data Structure Specification CDDL focuses on styles of specification that are in use in the community employing the data model as pioneered by JSON and now refined in CBOR. There are a number of more or less atomic elements of a CBOR data model, such as numbers, simple values (false, true, nil), text strings, and byte strings; CDDL does not focus on specifying their structure. CDDL of course also allows adding a CBOR tag to a data item. Beyond those atomic elements, further components of a data structure definition language are the datatypes used for composition: arrays and maps in CBOR (called "arrays" and "objects" in JSON). While these are only two representation formats, they are used to specify four loosely distinguishable styles of composition: o A _vector_: an array of elements that are mostly of the same semantics. The set of signatures associated with a signed data item is a typical application of a vector. o A _record_: an array the elements of which have different, positionally defined semantics, as detailed in the data structure definition. A 2D point, specified as an array of an x coordinate (which comes first) and a y coordinate (coming second), is an example of a record, as is the pair of exponent (first) and mantissa (second) in a CBOR decimal fraction. Birkholz, et al. Standards Track [Page 5] RFC 8610 CDDL June 2019 o A _table_: a map from a domain of map keys to a domain of map values, that are mostly of the same semantics. A set of language tags, each mapped to a text string translated to that specific language, is an example of a table. The key domain is usually not limited to a specific set by the specification but is open for the application, e.g., in a table mapping IP addresses to Media Access Control (MAC) addresses, the specification does not attempt to foresee all possible IP addresses. In a language such as JavaScript, a "Map" (as opposed to a plain "Object") would often be employed to achieve the generality of the key domain. o A _struct_: a map from a domain of map keys as defined by the specification to a domain of map values the semantics of each of which is bound to a specific map key. This is what many people have in mind when they think about JSON objects; CBOR adds the ability to use map keys that are not just text strings. Structs can be used to solve problems similar to those records are used for; the use of explicit map keys facilitates optionality and extensibility. Two important concepts provide the foundation for CDDL: 1. Instead of defining all four types of composition in CDDL separately, or even defining one kind for arrays (vectors and records) and one kind for maps (tables and structs), there is only one kind of composition in CDDL: the _group_ (Section 2.1). 2. The other important concept is that of a _type_. The entire CDDL specification defines a type (the one defined by its first _rule_), which formally is the set of CBOR data items that are acceptable as "instances" for this specification. CDDL predefines a number of basic types such as "uint" (unsigned integer) or "tstr" (text string), often making use of a simple formal notation for CBOR data items. Each value that can be expressed as a CBOR data item is also a type in its own right, e.g., "1". A type can be built as a _choice_ of other types, e.g., an "int" is either a "uint" or a "nint" (negative integer). Finally, a type can be built as an array or a map from a group. The rest of this section introduces a number of basic concepts of CDDL, and Section 3 defines additional syntax. Appendix C gives a concise summary of the semantics of CDDL. Birkholz, et al. Standards Track [Page 6] RFC 8610 CDDL June 2019 2.1. Groups and Composition in CDDL CDDL groups are lists of group _entries_, each of which can be a name/value pair or a more complex group expression (which then in turn stands for a sequence of name/value pairs). A CDDL group is a production in a grammar that matches certain sequences of name/value pairs but not others. The grammar is based on the concepts of Parsing Expression Grammars (PEGs) (see Appendix A). In an array context, only the value of the name/value pair is represented; the name is annotation only (and can be left off from the group specification if not needed). In a map context, the names become the map keys ("member keys"). In an array context, the actual sequence of elements in the group is important, as that sequence is the information that allows associating actual array elements with entries in the group. In a map context, the sequence of entries in a group is not relevant (but there is still a need to write down group entries in a sequence). An array matches a specification given as a group when the group matches a sequence of name/value pairs the value parts of which exactly match the elements of the array in order. A map matches a specification given as a group when the group matches a sequence of name/value pairs such that all of these name/value pairs are present in the map and the map has no name/value pair that is not covered by the group. A simple example of using a group directly in a map definition is: person = { age: int, name: tstr, employer: tstr, } Figure 1: Using a Group Directly in a Map The three entries of the group are written between the curly braces that create the map: here, "age", "name", and "employer" are the names that turn into the map key text strings, and "int" and "tstr" (text string) are the types of the map values under these keys. Birkholz, et al. Standards Track [Page 7] RFC 8610 CDDL June 2019 A group by itself (without creating a map around it) can be placed in (round) parentheses and given a name by using it in a rule: pii = ( age: int, name: tstr, employer: tstr, ) Figure 2: A Basic Group This separate, named group definition allows us to rephrase Figure 1 as: person = { pii } Figure 3: Using a Group by Name Note that the (curly) braces signify the creation of a map; the groups themselves are neutral as to whether they will be used in a map or an array. As shown in Figure 1, the parentheses for groups are optional when there is some other set of brackets present. Note that they can still be used, leading to this not-so-realistic, but perfectly valid, example: person = {( age: int, name: tstr, employer: tstr, )} Figure 4: Using a Parenthesized Group in a Map Birkholz, et al. Standards Track [Page 8] RFC 8610 CDDL June 2019 Groups can be used to factor out common parts of structs, e.g., instead of writing specifications in copy/paste style, such as in Figure 5, one can factor out the common subgroup, choose a name for it, and write only the specific parts into the individual maps (Figure 6). person = { age: int, name: tstr, employer: tstr, } dog = { age: int, name: tstr, leash-length: float, } Figure 5: Maps with Copy/Paste person = { identity, employer: tstr, } dog = { identity, leash-length: float, } identity = ( age: int, name: tstr, ) Figure 6: Using a Group for Factorization Note that the lists inside the braces in the above definitions constitute (anonymous) groups, while "identity" is a named group, which can then be included as part of other groups (anonymous as in the example, or themselves named). Birkholz, et al. Standards Track [Page 9] RFC 8610 CDDL June 2019 2.1.1. Usage Groups are the instrument used in composing data structures with CDDL. It is a matter of style in defining those structures whether to define groups (anonymously) right in their contexts or whether to define them in a separate rule and to reference them with their respective name (possibly more than once). With this, one is allowed to define all small parts of their data structures and compose bigger protocol data units with those or to have only one big protocol data unit that has all definitions ad hoc where needed. 2.1.2. Syntax The composition syntax is intended to be concise and easy to read: o The start and end of a group can be marked by "(" and ")". o Definitions of entries inside of a group are noted as follows: _keytype => valuetype,_ (read "keytype maps to valuetype"). The comma is actually optional (not just in the final entry), but it is considered good style to set it. The double arrow can be replaced by a colon in the common case of directly using a text string or integer literal as a key; see Section 3.5.1. This is also the common way of naming elements of an array just for documentation; see Section 3.4. A basic entry consists of a _keytype_ and a _valuetype_, both of which are types (Section 2.2); this entry matches any name/value pair the name of which is in the keytype and the value of which is in the valuetype. A group defined as a sequence of group entries matches any sequence of name/value pairs that is composed by concatenation in order of what the entries match. A group definition can also contain choices between groups; see Section 2.2.2. Birkholz, et al. Standards Track [Page 10] RFC 8610 CDDL June 2019 2.2. Types 2.2.1. Values Values such as numbers and strings can be used in place of a type. (For instance, this is a very common thing to do for a key type, common enough that CDDL provides additional convenience syntax for this.) The value notation is based on the C language, but does not offer all the syntactic variations (see Appendix B for details). The value notation for numbers inherits from C the distinction between integer values (no fractional part or exponent given -- NR1 [ISO6093]; "NR" stands for "numerical representation") and floating-point values (where a fractional part, an exponent, or both are present -- NR2 or NR3), so the type "1" does not include any floating-point numbers while the types "1e3" and "1.5" are both floating-point numbers and do not include any integer numbers. 2.2.2. Choices Many places that allow a type also allow a choice between types, delimited by a "/" (slash). The entire choice construct can be put into parentheses if this is required to make the construction unambiguous (please see Appendix B for details of the CDDL grammar). Choices of values can be used to express enumerations: attire = "bow tie" / "necktie" / "Internet attire" protocol = 6 / 17 Analogous to types, CDDL also allows choices between groups, delimited by a "//" (double slash). Note that the "//" operator binds much more weakly than the other CDDL operators, so each line within "delivery" in the following example is its own alternative in the group choice: address = { delivery } delivery = ( street: tstr, ? number: uint, city // po-box: uint, city // per-pickup: true ) city = ( name: tstr, zip-code: uint ) Birkholz, et al. Standards Track [Page 11] RFC 8610 CDDL June 2019 A group choice matches the union of the sets of name/value pair sequences that the alternatives in the choice can. For both type choices and group choices, additional alternatives can be added to a rule later in separate rules by using "/=" and "//=", respectively, instead of "=": attire /= "swimwear" delivery //= ( lat: float, long: float, drone-type: tstr ) It is not an error if a name is first used with a "/=" or "//=" (there is no need to "create it" with "="). 2.2.2.1. Ranges Instead of naming all the values that make up a choice, CDDL allows building a _range_ out of two values that are in an ordering relationship: a lower bound (first value) and an upper bound (second value). A range can be inclusive of both bounds given (denoted by joining two values by ".."), or it can include the lower bound and exclude the upper bound (denoted by instead using "..."). If the lower bound exceeds the upper bound, the resulting type is the empty set (this behavior can be desirable when generics (Section 3.10) are being used). device-address = byte max-byte = 255 byte = 0..max-byte ; inclusive range first-non-byte = 256 byte1 = 0...first-non-byte ; byte1 is equivalent to byte CDDL currently only allows ranges between integers (matching integer values) or between floating-point values (matching floating-point values). If both are needed in a type, a type choice between the two kinds of ranges can be (clumsily) used: int-range = 0..10 ; only integers match float-range = 0.0..10.0 ; only floats match BAD-range1 = 0..10.0 ; NOT DEFINED BAD-range2 = 0.0..10 ; NOT DEFINED numeric-range = int-range / float-range (See also the control operators .lt/.ge and .le/.gt in Section 3.8.6.) Birkholz, et al. Standards Track [Page 12] RFC 8610 CDDL June 2019 Note that the dot is a valid name continuation character in CDDL, so min..max is not a range expression but a single name. When using a name as the left-hand side of a range operator, use spacing as in min .. max to separate off the range operator. 2.2.2.2. Turning a Group into a Choice Some choices are built out of large numbers of values, often integers, each of which is best given a semantic name in the specification. Instead of naming each of these integers and then accumulating them into a choice, CDDL allows building a choice from a group by prefixing it with an "&" character: terminal-color = &basecolors basecolors = ( black: 0, red: 1, green: 2, yellow: 3, blue: 4, magenta: 5, cyan: 6, white: 7, ) extended-color = &( basecolors, orange: 8, pink: 9, purple: 10, brown: 11, ) As with the use of groups in arrays (Section 3.4), the member names have only documentary value (in particular, they might be used by a tool when displaying integers that are taken from that choice). 2.2.3. Representation Types CDDL allows the specification of a data item type by referring to the CBOR representation (specifically, to major types and additional information; see Section 2 of [RFC7049]). How this is used should be evident from the prelude (Appendix D): a hash mark ("#") optionally followed by a number from 0 to 7 identifying the major type, which then can be followed by a dot and a number specifying the additional information. This construction specifies the set of values that can be serialized in CBOR (i.e., "any"), by the given major type if one is given, or by the given major type with the additional information if both are given. Where a major type of 6 (Tag) is used, the type of the tagged item can be specified by appending it in parentheses. Birkholz, et al. Standards Track [Page 13] RFC 8610 CDDL June 2019 Note that although this notation is based on the CBOR serialization, it is about a set of values at the data model level, e.g., "#7.25" specifies the set of values that can be represented as half-precision floats; it does not mandate that these values also do have to be serialized as half-precision floats: CDDL does not provide any language means to restrict the choice of serialization variants. This also enables the use of CDDL with JSON, which uses a fundamentally different way of serializing (some of) the same values. It may be necessary to make use of representation types outside the prelude, e.g., a specification could start by making use of an existing tag in a more specific way or could define a new tag not defined in the prelude: my_breakfast = #6.55799(breakfast) ; cbor-any is too general! breakfast = cereal / porridge cereal = #6.998(tstr) porridge = #6.999([liquid, solid]) liquid = milk / water milk = 0 water = 1 solid = tstr 2.2.4. Root Type There is no special syntax to identify the root of a CDDL data structure definition: that role is simply taken by the first rule defined in the file. This is motivated by the usual top-down approach for defining data structures, decomposing a big data structure unit into smaller parts; however, except for the root type, there is no need to strictly follow this sequence. (Note that there is no way to use a group as a root -- it must be a type.) Birkholz, et al. Standards Track [Page 14] RFC 8610 CDDL June 2019 3. Syntax In this section, the overall syntax of CDDL is shown, alongside some examples just illustrating syntax. (The definition does not attempt to be overly formal; refer to Appendix B for details.) 3.1. General Conventions The basic syntax is inspired by ABNF [RFC5234], with the following: o Rules, whether they define groups or types, are defined with a name, followed by an equals sign "=" and the actual definition according to the respective syntactic rules of that definition. o A name can consist of any of the characters from the set {"A" to "Z", "a" to "z", "0" to "9", "_", "-", "@", ".", "$"}, starting with an alphabetic character (including "@", "_", "$") and ending in such a character or a digit. * Names are case sensitive. * It is preferred style to start a name with a lowercase letter. * The hyphen is preferred over the underscore (except in a "bareword" (Section 3.5.1), where the semantics may actually require an underscore). * The period may be useful for larger specifications, to express some module structure (as in "tcp.throughput" vs. "udp.throughput"). * A number of names are predefined in the CDDL prelude, as listed in Appendix D. * Rule names (types or groups) do not appear in the actual CBOR encoding, but names used as "barewords" in member keys do. o Comments are started by a ";" (semicolon) character and finish at the end of a line (LF or CRLF). o Except within strings, whitespace (spaces, newlines, and comments) is used to separate syntactic elements for readability (and to separate identifiers, range operators, or numbers that follow each other); it is otherwise completely optional. o Hexadecimal numbers are preceded by "0x" (without quotes) and are case insensitive. Similarly, binary numbers are preceded by "0b". Birkholz, et al. Standards Track [Page 15] RFC 8610 CDDL June 2019 o Text strings are enclosed by double quotation '"' characters. They follow the conventions for strings as defined in Section 7 of [RFC8259]. (ABNF users may want to note that there is no support in CDDL for the concept of case insensitivity in text strings; if necessary, regular expressions can be used (Section 3.8.3).) o Byte strings are enclosed by single quotation "'" characters and may be prefixed by "h" or "b64". If unprefixed, the string is interpreted as with a text string, except that single quotes must be escaped and that the resulting UTF-8 bytes are marked as a byte string (major type 2). If prefixed as "h" or "b64", the string is interpreted as a sequence of pairs of hex digits (base16; see Section 8 of [RFC4648]) or a base64(url) string (Section 4 or Section 5 of [RFC4648]), respectively (as with the diagnostic notation in Section 6 of [RFC7049]; cf. Appendix G.2); any whitespace present within the string (including comments) is ignored in the prefixed case. o CDDL uses UTF-8 [RFC3629] for its encoding. Processing of CDDL does not involve Unicode normalization processes. Example: ; This is a comment person = { g } g = ( "name": tstr, age: int, ; "age" is a bareword ) 3.2. Occurrence An optional _occurrence_ indicator can be given in front of a group entry. It is either (1) one of the characters "?" (optional), "*" (zero or more), or "+" (one or more) or (2) of the form n*m, where n and m are optional unsigned integers and n is the lower limit (default 0) and m is the upper limit (default no limit) of occurrences. If no occurrence indicator is specified, the group entry is to occur exactly once (as if 1*1 were specified). A group entry with an occurrence indicator matches sequences of name/value pairs that are composed by concatenating a number of sequences that the basic group entry matches, where the number needs to be allowed by the occurrence indicator. Birkholz, et al. Standards Track [Page 16] RFC 8610 CDDL June 2019 Note that CDDL, outside any directives/annotations that could possibly be defined, does not make any prescription as to whether arrays or maps use definite-length or indefinite-length encoding. That is, there is no correlation between leaving the size of an array "open" in the spec and the fact that it is then interchanged with definite or indefinite length. Please also note that CDDL can describe flexibility that the data model of the target representation does not have. This is rather obvious for JSON but is also relevant for CBOR: apartment = { kitchen: size, * bedroom: size, } size = float ; in m2 The previous specification does not mean that CBOR is changed to allow using the key "bedroom" more than once. In other words, due to the restrictions imposed by the data model, the third line pretty much turns into: ? bedroom: size, (Occurrence indicators beyond one are still useful in maps for groups that allow a variety of keys.) 3.3. Predefined Names for Types CDDL predefines a number of names. This subsection summarizes these names, but please see Appendix D for the exact definitions. The following keywords for primitive datatypes are defined: "bool" Boolean value (major type 7, additional information 20 or 21). "uint" An unsigned integer (major type 0). "nint" A negative integer (major type 1). "int" An unsigned integer or a negative integer. "float16" A number representable as a half-precision float [IEEE754] (major type 7, additional information 25). "float32" A number representable as a single-precision float [IEEE754] (major type 7, additional information 26). Birkholz, et al. Standards Track [Page 17] RFC 8610 CDDL June 2019 "float64" A number representable as a double-precision float [IEEE754] (major type 7, additional information 27). "float" One of float16, float32, or float64. "bstr" or "bytes" A byte string (major type 2). "tstr" or "text" Text string (major type 3). (Note that there are no predefined names for arrays or maps; these are defined with the syntax given below.) In addition, a number of types are defined in the prelude that are associated with CBOR tags, such as "tdate", "bigint", "regexp", etc. 3.4. Arrays Array definitions surround a group with square brackets. For each entry, an occurrence indicator as specified in Section 3.2 is permitted. For example: unlimited-people = [* person] one-or-two-people = [1*2 person] at-least-two-people = [2* person] person = ( name: tstr, age: uint, ) The group "person" is defined in such a way that repeating it in the array each time generates alternating names and ages, so these are four valid values for a data item of type "unlimited-people": ["roundlet", 1047, "psychurgy", 2204, "extrarhythmical", 2231] [] ["aluminize", 212, "climograph", 4124] ["penintime", 1513, "endocarditis", 4084, "impermeator", 1669, "coextension", 865] Birkholz, et al. Standards Track [Page 18] RFC 8610 CDDL June 2019 3.5. Maps The syntax for specifying maps merits special attention, as well as a number of optimizations and conveniences, as it is likely to be the focal point of many specifications employing CDDL. While the syntax does not strictly distinguish struct and table usage of maps, it caters specifically to each of them. But first, let's reiterate a feature of CBOR that it has inherited from JSON: the key/value pairs in CBOR maps have no fixed ordering. (One could imagine situations where fixing the ordering may be of use. For example, a decoder could look for values related with integer keys 1, 3, and 7. If the order were fixed and the decoder encounters the key 4 without having encountered key 3, it could conclude that key 3 is not available without doing more complicated bookkeeping. Unfortunately, neither JSON nor CBOR supports this, so no attempt was made to support this in CDDL either.) 3.5.1. Structs The "struct" usage of maps is similar to the way JSON objects are used in many JSON applications. A map is defined in the same way as that for defining an array (see Section 3.4), except for using curly braces "{}" instead of square brackets "[]". An occurrence indicator as specified in Section 3.2 is permitted for each group entry. The following is an example of a record with a structure embedded: Geography = [ city : tstr, gpsCoordinates : GpsCoordinates, ] GpsCoordinates = { longitude : uint, ; degrees, scaled by 10^7 latitude : uint, ; degrees, scaled by 10^7 } When encoding, the Geography record is encoded using a CBOR array with two members (the keys for the group entries are ignored), whereas the GpsCoordinates structure is encoded as a CBOR map with two key/value pairs. Birkholz, et al. Standards Track [Page 19] RFC 8610 CDDL June 2019 Types used in a structure can be defined in separate rules or just in place (potentially placed inside parentheses, such as for choices). For example: located-samples = { sample-point: int, samples: [+ float], } where "located-samples" is the datatype to be used when referring to the struct, and "sample-point" and "samples" are the keys to be used. This is actually a complete example: an identifier that is followed by a colon can be directly used as the text string for a member key (we speak of a "bareword" member key), as can a double-quoted string or a number. (When other types -- in particular, types that contain more than one value -- are used as the types of keys, they are followed by a double arrow; see below.) If a text string key does not match the syntax for an identifier (or if the specifier just happens to prefer using double quotes), the text string syntax can also be used in the member key position, followed by a colon. The above example could therefore have been written with quoted strings in the member key positions. More generally, types specified in ways other than those listed for the cases described above can be used in a key-type position by following them with a double arrow -- in particular, the double arrow is necessary if a type is named by an identifier (which, when followed by a colon, would be interpreted as a "bareword" and turned into a text string). A literal text string also gives rise to a type (which contains a single value only -- the given string), so another form for this example is: located-samples = { "sample-point" => int, "samples" => [+ float], } Birkholz, et al. Standards Track [Page 20] RFC 8610 CDDL June 2019 See Section 3.5.4 below for how the colon (":") shortcut described here also adds some implied semantics. A better way to demonstrate the use of the double arrow may be: located-samples = { sample-point: int, samples: [+ float], * equipment-type => equipment-tolerances, } equipment-type = [name: tstr, manufacturer: tstr] equipment-tolerances = [+ [float, float]] The example below defines a struct with optional entries: display name (as a text string), the name components first name and family name (as text strings), and age information (as an unsigned integer). PersonalData = { ? displayName: tstr, NameComponents, ? age: uint, } NameComponents = ( ? firstName: tstr, ? familyName: tstr, ) Note that the group definition for NameComponents does not generate another map; instead, all four keys are directly in the struct built by PersonalData. In this example, all key/value pairs are optional from the perspective of CDDL. With no occurrence indicator, an entry is mandatory. Birkholz, et al. Standards Track [Page 21] RFC 8610 CDDL June 2019 If the addition of more entries not specified by the current specification is desired, one can add this possibility explicitly: PersonalData = { ? displayName: tstr, NameComponents, ? age: uint, * tstr => any } NameComponents = ( ? firstName: tstr, ? familyName: tstr, ) Figure 7: Personal Data: Example for Extensibility The CDDL tool described in Appendix F generated the following as one acceptable instance for this specification: {"familyName": "agust", "antiforeignism": "pretzel", "springbuck": "illuminatingly", "exuviae": "ephemeris", "kilometrage": "frogfish"} (See Section 3.9 for one way to explicitly identify an extension point.) 3.5.2. Tables A table can be specified by defining a map with entries where the key type allows more than just a single value; for example: square-roots = {* x => y} x = int y = float Here, the key in each key/value pair has datatype x (defined as int), and the value has datatype y (defined as float). If the specification does not need to restrict one of x or y (i.e., the application is free to choose per entry), it can be replaced by the predefined name "any". Birkholz, et al. Standards Track [Page 22] RFC 8610 CDDL June 2019 As another example, the following could be used as a conversion table converting from an integer or float to a string: tostring = {* mynumber => tstr} mynumber = int / float 3.5.3. Non-deterministic Order While the way arrays are matched is fully determined by the PEG formalism (see Appendix A), matching is more complicated for maps, as maps do not have an inherent order. For each candidate name/value pair that the PEG algorithm would try, a matching member is picked out of the entire map. For certain group expressions, more than one member in the map may match. Most often, this is inconsequential, as the group expression tends to consume all matches: labeled-values = { ? fritz: number, * label => value } label = text value = number Here, if any member with the key "fritz" is present, this will be picked by the first entry of the group; all remaining text/number members will be picked by the second entry (and if anything remains unpicked, the map does not match). However, it is possible to construct group expressions where what is actually picked is indeterminate, but does matter: do-not-do-this = { int => int, int => 6, } When this expression is matched against "{3: 5, 4: 6}", the first group entry might pick off the "3: 5", leaving "4: 6" for matching the second one. Or it might pick off "4: 6", leaving nothing for the second entry. This pathological non-determinism is caused by specifying "more general" before "more specific" and by having a general rule that only consumes a subset of the map key/value pairs that it is able to match -- both tend not to occur in real-world specifications of maps. At the time of writing, CDDL tools cannot detect such cases automatically, and for the present version of the CDDL specification, the specification writer is simply urged to not write pathologically non-deterministic specifications. Birkholz, et al. Standards Track [Page 23] RFC 8610 CDDL June 2019 (The astute reader will be reminded of what was called "ambiguous content models" in the Standard Generalized Markup Language (SGML) and "non-deterministic content models" in XML. That problem is related to the one described here, but the problem here is specifically caused by the lack of order in maps, something that the XML schema languages do not have to contend with. Note that RELAX NG's "interleave" pattern handles lack of order explicitly on the specification side, while the instances in XML always have determinate order.) 3.5.4. Cuts in Maps The extensibility idiom discussed above for structs has one problem: extensible-map-example = { ? "optional-key" => int, * tstr => any } In this example, there is one optional key "optional-key", which, when present, maps to an integer. There is also a wildcard for any future additions. Unfortunately, the data item { "optional-key": "nonsense" } does match this specification: while the first entry of the group does not match, the second one (the wildcard) does. This may very well be desirable (e.g., if a future extension is to be allowed to extend the type of "optional-key"), but in many cases it isn't. In anticipation of a more general potential feature called "cuts", CDDL allows inserting a cut "^" into the definition of the map entry: extensible-map-example = { ? "optional-key" ^ => int, * tstr => any } A cut in this position means that once the member key matches the name part of an entry that carries a cut, other potential matches for the key of the member that occur in later entries in the group of the map are no longer allowed. In other words, when a group entry would pick a key/value pair based on just a matching key, it "locks in" the pick -- this rule applies, independently of whether the value matches Birkholz, et al. Standards Track [Page 24] RFC 8610 CDDL June 2019 as well, so when it does not, the entire map fails to match. In summary, the example above no longer matches the specification as modified with the cut. Since the desire for this kind of exclusive matching is so frequent, the ":" shortcut is actually defined to include the cut semantics. So, the preceding example (including the cut) can be written more simply as: extensible-map-example = { ? "optional-key": int, * tstr => any } or even shorter, using a bareword for the key: extensible-map-example = { ? optional-key: int, * tstr => any } 3.6. Tags A type can make use of a CBOR tag (major type 6) by using the representation type notation, giving #6.nnn(type) where nnn is an unsigned integer giving the tag number and "type" is the type of the data item being tagged. For example, the following line from the CDDL prelude (Appendix D) defines "biguint" as a type name for an unsigned bignum N: biguint = #6.2(bstr) The tags defined by [RFC7049] are included in the prelude. Additional tags registered since [RFC7049] was written need to be added to a CDDL specification as needed; e.g., a binary Universally Unique Identifier (UUID) tag could be referenced as "buuid" in a specification after defining buuid = #6.37(bstr) In the following example, usage of tag 32 for URIs is optional: my_uri = #6.32(tstr) / tstr Birkholz, et al. Standards Track [Page 25] RFC 8610 CDDL June 2019 3.7. Unwrapping The group that is used to define a map or an array can often be reused in the definition of another map or array. Similarly, a type defined as a tag carries an internal data item that one would like to refer to. In these cases, it is expedient to simply use the name of the map, array, or tag type as a handle for the group or type defined inside it. The "unwrap" operator (written by preceding a name by a tilde character "~") can be used to strip the type defined for a name by one layer, exposing the underlying group (for maps and arrays) or type (for tags). For example, an application might want to define a basic header and an advanced header. Without unwrapping, this might be done as follows: basic-header-group = ( field1: int, field2: text, ) basic-header = [ basic-header-group ] advanced-header = [ basic-header-group, field3: bytes, field4: number, ; as in the tagged type "time" ] Unwrapping simplifies this to: basic-header = [ field1: int, field2: text, ] advanced-header = [ ~basic-header, field3: bytes, field4: ~time, ] (Note that leaving out the first unwrap operator in the latter example would lead to nesting the basic-header in its own array inside the advanced-header, while, with the unwrapped basic-header, the definition of the group inside basic-header is essentially Birkholz, et al. Standards Track [Page 26] RFC 8610 CDDL June 2019 repeated inside advanced-header, leading to a single array. This can be used for various applications often solved by inheritance in programming languages. The effect of unwrapping can also be described as "threading in" the group or type inside the referenced type, which suggested the thread-like "~" character.) 3.8. Controls A _control_ allows relating a _target_ type with a _controller_ type via a _control operator_. The syntax for a control type is "target .control-operator controller", where control operators are special identifiers prefixed by a dot. (Note that _target_ or _controller_ might need to be parenthesized.) A number of control operators are defined at this point. Further control operators may be defined by new versions of this specification or by registering them according to the procedures in Section 6.1. 3.8.1. Control Operator .size A ".size" control controls the size of the target in bytes by the control type. The control is defined for text and byte strings, where it directly controls the number of bytes in the string. It is also defined for unsigned integers (see below). Figure 8 shows example usage for byte strings. full-address = [[+ label], ip4, ip6] ip4 = bstr .size 4 ip6 = bstr .size 16 label = bstr .size (1..63) Figure 8: Control for Size in Bytes When applied to an unsigned integer, the ".size" control restricts the range of that integer by giving a maximum number of bytes that should be needed in a computer representation of that unsigned integer. In other words, "uint .size N" is equivalent to "0...BYTES_N", where BYTES_N == 256**N. audio_sample = uint .size 3 ; 24-bit, equivalent to 0...16777216 Figure 9: Control for Integer Size in Bytes Birkholz, et al. Standards Track [Page 27] RFC 8610 CDDL June 2019 Note that, as with value restrictions in CDDL, this control is not a representation constraint; a number that fits into fewer bytes can still be represented in that form, and an inefficient implementation could use a longer form (unless that is restricted by some format constraints outside of CDDL, such as the rules in Section 3.9 of [RFC7049]). 3.8.2. Control Operator .bits A ".bits" control on a byte string indicates that, in the target, only the bits numbered by a number in the control type are allowed to be set. (Bits are counted the usual way, bit number "n" being set in "str" meaning that "(str[n >> 3] & (1 << (n & 7))) != 0".) Similarly, a ".bits" control on an unsigned integer "i" indicates that for all unsigned integers "n" where "(i & (1 << n)) != 0", "n" must be in the control type. tcpflagbytes = bstr .bits flags flags = &( fin: 8, syn: 9, rst: 10, psh: 11, ack: 12, urg: 13, ece: 14, cwr: 15, ns: 0, ) / (4..7) ; data offset bits rwxbits = uint .bits rwx rwx = &(r: 2, w: 1, x: 0) Figure 10: Control for What Bits Can Be Set The CDDL tool described in Appendix F generates the following ten example instances for "tcpflagbytes": h'906d' h'01fc' h'8145' h'01b7' h'013d' h'409f' h'018e' h'c05f' h'01fa' h'01fe' These examples do not illustrate that the above CDDL specification does not explicitly specify a size of two bytes: a valid all-clear instance of flag bytes could be "h''" or "h'00'" or even "h'000000'" as well. Birkholz, et al. Standards Track [Page 28] RFC 8610 CDDL June 2019 3.8.3. Control Operator .regexp A ".regexp" control indicates that the text string given as a target needs to match the XML Schema Definition (XSD) regular expression given as a value in the control type. XSD regular expressions are defined in Appendix F of [W3C.REC-xmlschema-2-20041028]. nai = tstr .regexp "[A-Za-z0-9]+@[A-Za-z0-9]+(\\.[A-Za-z0-9]+)+" Figure 11: Control with an XSD regexp An example matching this regular expression: "N1@CH57HF.4Znqe0.dYJRN.igjf" 3.8.3.1. Usage Considerations Note that XSD regular expressions do not support the usual \x or \u escapes for hexadecimal expression of bytes or Unicode code points. However, in CDDL the XSD regular expressions are contained in text strings, the literal notation for which provides \u escapes; this should suffice for most applications that use regular expressions for text strings. (Note that this also means that there is one level of string escaping before the XSD escaping rules are applied.) XSD regular expressions support character class subtraction, a feature often not found in regular expression libraries; specification writers may want to use this feature sparingly. Similar considerations apply to Unicode character classes; where these are used, the specification that employs CDDL SHOULD identify which Unicode versions are addressed. Other surprises for infrequent users of XSD regular expressions may include the following: o No direct support for case insensitivity. While case insensitivity has gone mostly out of fashion in protocol design, it is sometimes needed and then needs to be expressed manually as in "[Cc][Aa][Ss][Ee]". o The support for popular character classes such as \w and \d is based on Unicode character properties; this is often not what is desired in an ASCII-based protocol and thus might lead to surprises. (\s and \S do have their more conventional meanings, and "." matches any character but the line-ending characters \r or \n.) Birkholz, et al. Standards Track [Page 29] RFC 8610 CDDL June 2019 3.8.3.2. Discussion There are many flavors of regular expression in use in the programming community. For instance, Perl-Compatible Regular Expressions (PCREs) are widely used and probably are more useful than XSD regular expressions. However, there is no normative reference for PCREs that could be used in the present document. Instead, we opt for XSD regular expressions for now. There is precedent for that choice in the IETF, e.g., in YANG [RFC7950]. Note that CDDL uses controls as its main extension point. This creates the opportunity to add further regular expression formats in addition to the one referenced here, if desired. As an example, a proposal for a ".pcre" control is defined in [CDDL-Freezer]. 3.8.4. Control Operators .cbor and .cborseq A ".cbor" control on a byte string indicates that the byte string carries a CBOR-encoded data item. Decoded, the data item matches the type given as the right-hand-side argument (type1 in the following example). "bytes .cbor type1" Similarly, a ".cborseq" control on a byte string indicates that the byte string carries a sequence of CBOR-encoded data items. When the data items are taken as an array, the array matches the type given as the right-hand-side argument (type2 in the following example). "bytes .cborseq type2" (The conversion of the encoded sequence to an array can be effected, for instance, by wrapping the byte string between the two bytes 0x9f and 0xff and decoding the wrapped byte string as a CBOR-encoded data item.) 3.8.5. Control Operators .within and .and A ".and" control on a type indicates that the data item matches both the left-hand-side type and the type given as the right-hand side. (Formally, the resulting type is the intersection of the two types given.) "type1 .and type2" Birkholz, et al. Standards Track [Page 30] RFC 8610 CDDL June 2019 A variant of the ".and" control is the ".within" control, which expresses an additional intent: the left-hand-side type is meant to be a subset of the right-hand-side type. "type1 .within type2" While both forms have the identical formal semantics (intersection), the intention of the ".within" form is that the right-hand side gives guidance to the types allowed on the left-hand side, which typically is a socket (Section 3.9): message = $message .within message-structure message-structure = [message_type, *message_option] message_type = 0..255 message_option = any $message /= [3, dough: text, topping: [* text]] $message /= [4, noodles: text, sauce: text, parmesan: bool] For ".within", a tool might flag an error if type1 allows data items that are not allowed by type2. In contrast, for ".and", there is no expectation that type1 is already a subset of type2. 3.8.6. Control Operators .lt, .le, .gt, .ge, .eq, .ne, and .default The controls .lt, .le, .gt, .ge, .eq, and .ne specify a constraint on the left-hand-side type to be a value less than, less than or equal to, greater than, greater than or equal to, equal to, or not equal to a value given as a right-hand-side type (containing just that single value). In the present specification, the first four controls (.lt, .le, .gt, and .ge) are defined only for numeric types, as these have a natural ordering relationship. speed = number .ge 0 ; unit: m/s .ne and .eq are defined for both numeric values and values of other types. If one of the values is not of a numeric type, equality is determined as follows: text strings are equal (satisfy .eq / do not satisfy .ne) if they are bytewise identical; the same applies for byte strings. Arrays are equal if they have the same number of elements, all of which are equal pairwise in order between the arrays. Maps are equal if they have the same number of key/value pairs, and there is pairwise equality between the key/value pairs between the two maps. Tagged values are equal if they both have the same tag and the values are equal. Values of simple types match if they are the same values. Numeric types that occur within arrays, Birkholz, et al. Standards Track [Page 31] RFC 8610 CDDL June 2019 maps, or tagged values are equal if their numeric value is equal and they are both integers or both floating-point values. All other cases are not equal (e.g., comparing a text string with a byte string). A variant of the ".ne" control is the ".default" control, which expresses an additional intent: the value specified by the right-hand-side type is intended as a default value for the left-hand-side type given, and the implied .ne control is there to prevent this value from being sent over the wire. This control is only meaningful when the control type is used in an optional context; otherwise, there would be no way to make use of the default value. timer = { time: uint, ? displayed-step: (number .gt 0) .default 1 } 3.9. Socket/Plug For both type choices and group choices, a mechanism is defined that facilitates starting out with empty choices and assembling them later, potentially in separate files that are concatenated to build the full specification. Per convention, CDDL extension points are marked with a leading dollar sign (types) or two leading dollar signs (groups). Tools honor that convention by not raising an error if such a type or group is not defined at all; the symbol is then taken to be an empty type choice (group choice), i.e., no choice is available. tcp-header = {seq: uint, ack: uint, * $$tcp-option} ; later, in a different file $$tcp-option //= ( sack: [+(left: uint, right: uint)] ) ; and, maybe in another file $$tcp-option //= ( sack-permitted: true ) Names that start with a single "$" are "type sockets", starting out as an empty type, and intended to be extended via "/=". Names that start with a double "$$" are "group sockets", starting out as an Birkholz, et al. Standards Track [Page 32] RFC 8610 CDDL June 2019 empty group choice, and intended to be extended via "//=". In either case, it is not an error if there is no definition for a socket at all; this then means there is no way to satisfy the rule (i.e., the choice is empty). As a convention, all definitions (plugs) for socket names must be augmentations, i.e., they must be using "/=" and "//=", respectively. To pick up the example illustrated in Figure 7, the socket/plug mechanism could be used as shown in Figure 12: PersonalData = { ? displayName: tstr, NameComponents, ? age: uint, * $$personaldata-extensions } NameComponents = ( ? firstName: tstr, ? familyName: tstr, ) ; The above already works as is. ; But then, we can add later: $$personaldata-extensions //= ( favorite-salsa: tstr, ) ; and again, somewhere else: $$personaldata-extensions //= ( shoesize: uint, ) Figure 12: Personal Data Example: Using Socket/Plug Extensibility 3.10. Generics Using angle brackets, the left-hand side of a rule can add formal parameters after the name being defined, as in: messages = message<"reboot", "now"> / message<"sleep", 1..100> message = {type: t, value: v} Birkholz, et al. Standards Track [Page 33] RFC 8610 CDDL June 2019 When using a generic rule, the formal parameters are bound to the actual arguments supplied (also using angle brackets), within the scope of the generic rule (as if there were a rule of the form parameter = argument). Generic rules can be used for establishing names for both types and groups. (At this time, there are some limitations to the nesting of generics in the CDDL tool described in Appendix F.) 3.11. Operator Precedence As with any language that has multiple syntactic features such as prefix and infix operators, CDDL has operators that bind more tightly than others. This is becoming more complicated than, say, in ABNF, as CDDL has both types and groups, with operators that are specific to these concepts. Type operators (such as "/" for type choice) operate on types, while group operators (such as "//" for group choice) operate on groups. Types can simply be used in groups, but groups need to be bracketed (as arrays or maps) to become types. So, type operators naturally bind closer than group operators. For instance, in t = [group1] group1 = (a / b // c / d) a = 1 b = 2 c = 3 d = 4 group1 is a group choice between the type choice of a and b and the type choice of c and d. This becomes more relevant once member keys and/or occurrences are added in: t = {group2} group2 = (? ab: a / b // cd: c / d) a = 1 b = 2 c = 3 d = 4 is a group choice between the optional member "ab" of type a or b and the member "cd" of type c or d. Note that the optionality is attached to the first choice ("ab"), not to the second choice. Birkholz, et al. Standards Track [Page 34] RFC 8610 CDDL June 2019 Similarly, in t = [group3] group3 = (+ a / b / c) a = 1 b = 2 c = 3 group3 is a repetition of a type choice between a, b, and c; if just a is to be repeatable, a group choice is needed to focus the occurrence: t = [group4] group4 = (+ a // b / c) a = 1 b = 2 c = 3 group4 is a group choice between a repeatable a and a single b or c. A comment has been that the semantics of group3 could be counterintuitive. In general, as with many other languages with operator precedence rules, the specification writer is encouraged not to rely on them, but to insert parentheses liberally to guide readers that are not familiar with CDDL precedence rules: t = [group4a] group4a = ((+ a) // (b / c)) a = 1 b = 2 c = 3 The operator precedences, in sequence of loose to tight binding, are defined in Appendix B and summarized in Table 1. (Arities given are 1 for unary prefix operators and 2 for binary infix operators.) Birkholz, et al. Standards Track [Page 35] RFC 8610 CDDL June 2019 +----------+-------+---------------------------+------------+ | Operator | Arity | Operates on | Precedence | +----------+-------+---------------------------+------------+ | = | 2 | name = type, name = group | 1 | | /= | 2 | name /= type | 1 | | //= | 2 | name //= group | 1 | | // | 2 | group // group | 2 | | , | 2 | group, group | 3 | | * | 1 | * group | 4 | | n*m | 1 | n*m group | 4 | | + | 1 | + group | 4 | | ? | 1 | ? group | 4 | | => | 2 | type => type | 5 | | : | 2 | name: type | 5 | | / | 2 | type / type | 6 | | .. | 2 | type..type | 7 | | ... | 2 | type...type | 7 | | .ctrl | 2 | type .ctrl type | 7 | | & | 1 | &group | 8 | | ~ | 1 | ~type | 8 | +----------+-------+---------------------------+------------+ Table 1: Summary of Operator Precedences 4. Making Use of CDDL In this section, we discuss several potential ways to employ CDDL. 4.1. As a Guide for a Human User CDDL can be used to efficiently define the layout of CBOR data, such that a human implementer can easily see how data is supposed to be encoded. Since CDDL maps parts of the CBOR data to human-readable names, tools could be built that use CDDL to provide a human-friendly representation of the CBOR data and allow them to edit such data while remaining compliant with its CDDL definition. 4.2. For Automated Checking of CBOR Data Structures CDDL has been specified such that a machine can handle the CDDL definition and related CBOR data (and, thus, also JSON data). For example, a machine could use CDDL to check whether or not CBOR data is compliant with its definition. Birkholz, et al. Standards Track [Page 36] RFC 8610 CDDL June 2019 The need for thoroughness of such compliance checking depends on the application. For example, an application may decide not to check the data structure at all and use the CDDL definition solely as a means to indicate the structure of the data to the programmer. On the other hand, the application may also implement a checking mechanism that goes as far as checking that all mandatory map members are available. The matter of how far the data description must be enforced by an application is left to the designers and implementers of that application, keeping in mind related security considerations. In no case is it intended that a CDDL tool would be "writing code" for an implementation. 4.3. For Data Analysis Tools In the long run, it can be expected that more and more data will be stored using the CBOR data format. Where there is data, there is data analysis and the need to process such data automatically. CDDL can be used for such automated data processing, allowing tools to verify data, clean it, and extract particular parts of interest from it. Since CBOR is designed with constrained devices in mind, a likely use of it would be small sensors. An interesting use would thus be automated analysis of sensor data. 5. Security Considerations This document presents a content rules language for expressing CBOR data structures. As such, it does not bring any security issues on itself, although specifications of protocols that use CBOR naturally need security analyses when defined. General guidelines for writing security considerations are defined in [RFC3552] (BCP 72). Specifications using CDDL to define CBOR structures in protocols need to follow those guidelines. Additional topics that could be considered in a security considerations section for a specification that uses CDDL to define CBOR structures include the following: o Where could the language maybe cause confusion in a way that will enable security issues? Birkholz, et al. Standards Track [Page 37] RFC 8610 CDDL June 2019 o Where a CDDL matcher is part of the implementation of a system, the security of the system ought not depend on the correctness of the CDDL specification or CDDL implementation without any further defenses in place. o Where the CDDL specification includes extension points, the impact of extensions on the security of the system needs to be carefully considered. Writers of CDDL specifications are strongly encouraged to value clarity and transparency of the specification over its elegance. Keep it as simple as possible while still expressing the needed data model. A related observation about formal description techniques in general that is strongly recommended to be kept in mind by writers of CDDL specifications: just because CDDL makes it easier to handle complexity in a specification, that does not make that complexity somehow less bad (except maybe on the level of the humans having to grasp the complex structure while reading the spec). 6. IANA Considerations 6.1. CDDL Control Operators Registry IANA has created a registry for control operators (Section 3.8). The "CDDL Control Operators" registry has been created within the "Concise Data Definition Language (CDDL)" registry. Each entry in the subregistry must include the name of the control operator (by convention given with the leading dot) and a reference to its documentation. Names must be composed of the leading dot followed by a text string conforming to the production "id" in Appendix B. Birkholz, et al. Standards Track [Page 38] RFC 8610 CDDL June 2019 Initial entries in this registry are as follows: +----------+---------------+ | Name | Documentation | +----------+---------------+ | .size | RFC 8610 | | .bits | RFC 8610 | | .regexp | RFC 8610 | | .cbor | RFC 8610 | | .cborseq | RFC 8610 | | .within | RFC 8610 | | .and | RFC 8610 | | .lt | RFC 8610 | | .le | RFC 8610 | | .gt | RFC 8610 | | .ge | RFC 8610 | | .eq | RFC 8610 | | .ne | RFC 8610 | | .default | RFC 8610 | +----------+---------------+ All other control operator names are Unassigned. The IANA policy for additions to this registry is "Specification Required" as defined in [RFC8126] (which involves an Expert Review) for names that do not include an internal dot and "IETF Review" for names that do include an internal dot. The expert reviewer is specifically instructed that other Standards Development Organizations (SDOs) may want to define control operators that are specific to their fields (e.g., based on a binary syntax already in use at the SDO); the review process should strive to facilitate such an undertaking. Birkholz, et al. Standards Track [Page 39] RFC 8610 CDDL June 2019 7. References 7.1. Normative References [ISO6093] ISO, "Information processing -- Representation of numerical values in character strings for information interchange", ISO 6093, 1985. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3552] Rescorla, E. and B. Korver, "Guidelines for Writing RFC Text on Security Considerations", BCP 72, RFC 3552, DOI 10.17487/RFC3552, July 2003, . [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November 2003, . [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, . [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, . [RFC7049] Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049, October 2013, . [RFC7493] Bray, T., Ed., "The I-JSON Message Format", RFC 7493, DOI 10.17487/RFC7493, March 2015, . [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, June 2017, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . Birkholz, et al. Standards Track [Page 40] RFC 8610 CDDL June 2019 [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [W3C.REC-xmlschema-2-20041028] Biron, P. and A. Malhotra, "XML Schema Part 2: Datatypes Second Edition", World Wide Web Consortium Recommendation REC-xmlschema-2-20041028, October 2004, . 7.2. Informative References [CDDL-Freezer] Bormann, C., "A feature freezer for the Concise Data Definition Language (CDDL)", Work in Progress, draft-bormann-cbor-cddl-freezer-01, August 2018. [GRASP] Bormann, C., Carpenter, B., Ed., and B. Liu, Ed., "A Generic Autonomic Signaling Protocol (GRASP)", Work in Progress, draft-ietf-anima-grasp-15, July 2017. [IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic", IEEE Std 754-2008. [JCR] Newton, A. and P. Cordell, "A Language for Rules Describing JSON Content", Work in Progress, draft-newton-json-content-rules-09, September 2017. [PEG] Ford, B., "Parsing expression grammars: a recognition- based syntactic foundation", Proceedings of the 31st ACM SIGPLAN-SIGACT symposium on Principles of programming languages - POPL '04, DOI 10.1145/964001.964011, January 2004. [RELAXNG] ISO/IEC, "Information technology -- Document Schema Definition Language (DSDL) -- Part 2: Regular-grammar- based validation -- RELAX NG", ISO/IEC 19757-2, December 2008. [RFC7071] Borenstein, N. and M. Kucherawy, "A Media Type for Reputation Interchange", RFC 7071, DOI 10.17487/RFC7071, November 2013, . [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016, . Birkholz, et al. Standards Track [Page 41] RFC 8610 CDDL June 2019 [RFC8007] Murray, R. and B. Niven-Jenkins, "Content Delivery Network Interconnection (CDNI) Control Interface / Triggers", RFC 8007, DOI 10.17487/RFC8007, December 2016, . [RFC8152] Schaad, J., "CBOR Object Signing and Encryption (COSE)", RFC 8152, DOI 10.17487/RFC8152, July 2017, . [RFC8428] Jennings, C., Shelby, Z., Arkko, J., Keranen, A., and C. Bormann, "Sensor Measurement Lists (SenML)", RFC 8428, DOI 10.17487/RFC8428, August 2018, . [YAML] Ben-Kiki, O., Evans, C., and I. Net, "YAML Ain't Markup Language (YAML[TM]) Version 1.2", 3rd Edition, October 2009, . Birkholz, et al. Standards Track [Page 42] RFC 8610 CDDL June 2019 Appendix A. Parsing Expression Grammars (PEGs) This appendix is normative. Since the 1950s, many grammar notations are based on Backus-Naur Form (BNF), a notation for context-free grammars (CFGs) within Chomsky's generative system of grammars. The Augmented Backus-Naur Form (ABNF) [RFC5234], widely used in IETF specifications and also inspiring the syntax of CDDL, is an example of this. Generative grammars can express ambiguity well, but this very property may make them hard to use in recognition systems, spawning a number of subdialects that pose constraints on generative grammars to be used with parser generators; this scenario may be hard for the specification writer to manage. PEGs [PEG] provide an alternative formal foundation for describing grammars that emphasizes recognition over generation and resolves what would have been ambiguity in generative systems by introducing the concept of "prioritized choice". The notation for PEGs is quite close to BNF, with the usual "Extended BNF" features, such as repetition, added. However, where BNF uses the unordered (symmetrical) choice operator "|" (incidentally notated as "/" in ABNF), PEG provides a prioritized choice operator "/". The two alternatives listed are to be tested in left-to-right order, locking in the first successful match and disregarding any further potential matches within the choice (but not disabling alternatives in choices containing this choice, as a cut (Section 3.5.4) would). For example, the ABNF expressions A = "a" "b" / "a" (1) and A = "a" / "a" "b" (2) are equivalent in ABNF's original generative framework but are very different in PEG: in (2), the second alternative will never match, as any input string starting with an "a" will already succeed in the first alternative, locking in the match. Similarly, the occurrence indicators ("?", "*", "+") are "greedy" in PEG, i.e., they consume as much input as they match (and, as a consequence, "a* a" in PEG notation or "*a a" in CDDL syntax never can match anything, as all input matching "a" is already consumed by the initial "a*", leaving nothing to match the second "a"). Birkholz, et al. Standards Track [Page 43] RFC 8610 CDDL June 2019 Incidentally, the grammar of CDDL itself, as written in ABNF in Appendix B, can be interpreted both (1) in the generative framework on which RFC 5234 is based and (2) as a PEG. This was made possible by ordering the choices in the grammar such that a successful match made on the left-hand side of a "/" operator is always the intended match, instead of relying on the power of symmetrical choices (for example, note the sequence of alternatives in the rule for "uint", where the lone zero is behind the longer match alternatives that start with a zero). The syntax used for expressing the PEG component of CDDL is based on ABNF, interpreted in the obvious way with PEG semantics. The ABNF convention of notating occurrence indicators before the controlled primary, and of allowing numeric values for minimum and maximum occurrence around a "*" sign, is copied. While PEG is only about characters, CDDL has a richer set of elements, such as types and groups. Specifically, the following constructs map: +-------+-------+-------------------------------------------+ | CDDL | PEG | Remark | +-------+-------+-------------------------------------------+ | "=" | "<-" | /= and //= are abbreviations | | "//" | "/" | prioritized choice | | "/" | "/" | prioritized choice, limited to types only | | "?" P | P "?" | zero or one | | "*" P | P "*" | zero or more | | "+" P | P "+" | one or more | | A B | A B | sequence | | A, B | A B | sequence, comma is decoration only | +-------+-------+-------------------------------------------+ The literal notation and the use of square brackets, curly braces, tildes, ampersands, and hash marks are specific to CDDL and unrelated to the conventional PEG notation. The DOT (".") from PEG is replaced by the unadorned "#" or its alias "any". Also, CDDL does not provide the syntactic predicate operators NOT ("!") or AND ("&") from PEG, reducing expressiveness as well as complexity. For more details about PEG's theoretical foundation and interesting properties of the operators such as associativity and distributivity, the reader is referred to [PEG]. Birkholz, et al. Standards Track [Page 44] RFC 8610 CDDL June 2019 Appendix B. ABNF Grammar This appendix is normative. The following is a formal definition of the CDDL syntax in ABNF [RFC5234]. Note that, as is defined in ABNF, the quote-delimited strings below are case insensitive (while string values and names are case sensitive in CDDL). cddl = S 1*(rule S) rule = typename [genericparm] S assignt S type / groupname [genericparm] S assigng S grpent typename = id groupname = id assignt = "=" / "/=" assigng = "=" / "//=" genericparm = "<" S id S *("," S id S ) ">" genericarg = "<" S type1 S *("," S type1 S ) ">" type = type1 *(S "/" S type1) type1 = type2 [S (rangeop / ctlop) S type2] ; space may be needed before the operator if type2 ends in a name type2 = value / typename [genericarg] / "(" S type S ")" / "{" S group S "}" / "[" S group S "]" / "~" S typename [genericarg] / "&" S "(" S group S ")" / "&" S groupname [genericarg] / "#" "6" ["." uint] "(" S type S ")" / "#" DIGIT ["." uint] ; major/ai / "#" ; any rangeop = "..." / ".." ctlop = "." id group = grpchoice *(S "//" S grpchoice) grpchoice = *(grpent optcom) Birkholz, et al. Standards Track [Page 45] RFC 8610 CDDL June 2019 grpent = [occur S] [memberkey S] type / [occur S] groupname [genericarg] ; preempted by above / [occur S] "(" S group S ")" memberkey = type1 S ["^" S] "=>" / bareword S ":" / value S ":" bareword = id optcom = S ["," S] occur = [uint] "*" [uint] / "+" / "?" uint = DIGIT1 *DIGIT / "0x" 1*HEXDIG / "0b" 1*BINDIG / "0" value = number / text / bytes int = ["-"] uint ; This is a float if it has fraction or exponent; int otherwise number = hexfloat / (int ["." fraction] ["e" exponent ]) hexfloat = ["-"] "0x" 1*HEXDIG ["." 1*HEXDIG] "p" exponent fraction = 1*DIGIT exponent = ["+"/"-"] 1*DIGIT text = %x22 *SCHAR %x22 SCHAR = %x20-21 / %x23-5B / %x5D-7E / %x80-10FFFD / SESC SESC = "\" (%x20-7E / %x80-10FFFD) bytes = [bsqual] %x27 *BCHAR %x27 BCHAR = %x20-26 / %x28-5B / %x5D-10FFFD / SESC / CRLF bsqual = "h" / "b64" Birkholz, et al. Standards Track [Page 46] RFC 8610 CDDL June 2019 id = EALPHA *(*("-" / ".") (EALPHA / DIGIT)) ALPHA = %x41-5A / %x61-7A EALPHA = ALPHA / "@" / "_" / "$" DIGIT = %x30-39 DIGIT1 = %x31-39 HEXDIG = DIGIT / "A" / "B" / "C" / "D" / "E" / "F" BINDIG = %x30-31 S = *WS WS = SP / NL SP = %x20 NL = COMMENT / CRLF COMMENT = ";" *PCHAR CRLF PCHAR = %x20-7E / %x80-10FFFD CRLF = %x0A / %x0D.0A Figure 13: CDDL ABNF Note that this ABNF does not attempt to reflect the detailed rules of what can be in a prefixed byte string. Appendix C. Matching Rules This appendix is normative. In this appendix, we go through the ABNF syntax rules defined in Appendix B and briefly describe the matching semantics of each syntactic feature. In this context, an instance (data item) "matches" a CDDL specification if it is allowed by the CDDL specification; this is then broken down into parts of specifications (type and group expressions) and parts of instances (data items). cddl = S 1*(rule S) A CDDL specification is a sequence of one or more rules. Each rule gives a name to a right-hand-side expression, either a CDDL type or a CDDL group. Rule names can be used in the rule itself and/or other rules (and tools can output warnings if that is not the case). The order of the rules is significant only in two cases: 1. The first rule defines the semantics of the entire specification; hence, there is no need to give that root rule a special name or special syntax in the language (as, for example, with "start" in RELAX NG); its name can therefore be chosen to be descriptive. (As with all other rule names, the name of the initial rule may be used in itself or in other rules.) Birkholz, et al. Standards Track [Page 47] RFC 8610 CDDL June 2019 2. Where a rule contributes to a type or group choice (using "/=" or "//="), that choice is populated in the order the rules are given; see below. rule = typename [genericparm] S assignt S type / groupname [genericparm] S assigng S grpent typename = id groupname = id A rule defines a name for a type expression (production "type") or for a group expression (production "grpent"), with the intention that the semantics does not change when the name is replaced by its (parenthesized if needed) definition. Note that whether the name defined by a rule stands for a type or a group isn't always determined by syntax alone: e.g., "a = b" can make "a" a type if "b" is a type, or a group if "b" is a group. More subtly, in "a = (b)", "a" may be used as a type if "b" is a type, or as a group both when "b" is a group and when "b" is a type (a good convention to make the latter case stand out to the human reader is to write "a = (b,)"). (Note that the same dual meaning of parentheses applies within an expression but often can be resolved by the context of the parenthesized expression. On the more general point, it may not be clear immediately either whether "b" stands for a group or a type -- this semantic processing may need to span several levels of rule definitions before a determination can be made.) assignt = "=" / "/=" assigng = "=" / "//=" A plain equals sign defines the rule name as the equivalent of the expression to the right; it is an error if the name was already defined with a different expression. A "/=" or "//=" extends a named type or a group by additional choices; a number of these could be replaced by collecting all the right-hand sides and creating a single rule with a type choice or a group choice built from the right-hand sides in the order of the rules given. (It is not an error to extend a rule name that has not yet been defined; this makes the right-hand side the first entry in the choice being created.) genericparm = "<" S id S *("," S id S ) ">" genericarg = "<" S type1 S *("," S type1 S ) ">" Rule names can have generic parameters, which cause temporary assignments within the right-hand sides to the parameter names from the arguments given when citing the rule name. type = type1 *(S "/" S type1) Birkholz, et al. Standards Track [Page 48] RFC 8610 CDDL June 2019 A type can be given as a choice between one or more types. The choice matches a data item if the data item matches any one of the types given in the choice. The choice uses PEG semantics as discussed in Appendix A: the first choice that matches wins. (As a result, the order of rules that contribute to a single rule name can very well matter.) type1 = type2 [S (rangeop / ctlop) S type2] Two types can be combined with a range operator (see below) or a control operator (see Section 3.8). type2 = value A type can be just a single value (such as 1 or "icecream" or h'0815'), which matches only a data item with that specific value (no conversions defined), / typename [genericarg] or be defined by a rule giving a meaning to a name (possibly after supplying generic arguments as required by the generic parameters), / "(" S type S ")" or be defined in a parenthesized type expression (parentheses may be necessary to override some operator precedence), or / "{" S group S "}" a map expression, which matches a valid CBOR map the key/value pairs of which can be ordered in such a way that the resulting sequence matches the group expression, or / "[" S group S "]" an array expression, which matches a CBOR array the elements of which -- when taken as values and complemented by a wildcard (matches anything) key each -- match the group, or / "~" S typename [genericarg] an "unwrapped" group (see Section 3.7), which matches the group inside a type defined as a map or an array by wrapping the group, or / "&" S "(" S group S ")" / "&" S groupname [genericarg] Birkholz, et al. Standards Track [Page 49] RFC 8610 CDDL June 2019 an enumeration expression, which matches any value that is within the set of values that the values of the group given can take, or / "#" "6" ["." uint] "(" S type S ")" a tagged data item, tagged with the "uint" given and containing the type given as the tagged value, or / "#" DIGIT ["." uint] ; major/ai a data item of a major type (given by the DIGIT), optionally constrained to the additional information given by the uint, or / "#" ; any any data item. rangeop = "..." / ".." A range operator can be used to join two type expressions that stand for either two integer values or two floating-point values; it matches any value that is between the two values, where the first value is always included in the matching set and the second value is included for ".." and excluded for "...". ctlop = "." id A control operator ties a _target_ type to a _controller_ type as defined in Section 3.8. Note that control operators are an extension point for CDDL; additional documents may want to define additional control operators. group = grpchoice *(S "//" S grpchoice) A group matches any sequence of key/value pairs that matches any of the choices given (again using PEG semantics). grpchoice = *(grpent optcom) Each of the component groups is given as a sequence of group entries. For a match, the sequence of key/value pairs given needs to match the sequence of group entries in the sequence given. grpent = [occur S] [memberkey S] type A group entry can be given by a value type, which needs to be matched by the value part of a single element; and, optionally, a memberkey type, which needs to be matched by the key part of the element, if Birkholz, et al. Standards Track [Page 50] RFC 8610 CDDL June 2019 the memberkey is given. If the memberkey is not given, the entry can only be used for matching arrays, not for maps. (See below for how that is modified by the occurrence indicator.) / [occur S] groupname [genericarg] ; preempted by above A group entry can be built from a named group, or / [occur S] "(" S group S ")" from a parenthesized group, again with a possible occurrence indicator. memberkey = type1 S ["^" S] "=>" / bareword S ":" / value S ":" Key types can be given by a type expression, a bareword (which stands for a type that just contains a string value created from this bareword), or a value (which stands for a type that just contains this value). A key value matches its key type if the key value is a member of the key type, unless a cut preceding it in the group applies (see Section 3.5.4 for how map matching is influenced by the presence of the cuts denoted by "^" or ":" in previous entries). bareword = id A bareword is an alternative way to write a type with a single text string value; it can only be used in the syntactic context given above. optcom = S ["," S] (Optional commas do not influence the matching.) occur = [uint] "*" [uint] / "+" / "?" An occurrence indicator modifies the group given to its right by requiring the group to match the sequence to be matched exactly for a certain number of times (see Section 3.2) in sequence, i.e., it acts as a (possibly infinite) group choice that contains choices with the group repeated each of the occurrences times. Birkholz, et al. Standards Track [Page 51] RFC 8610 CDDL June 2019 The rest of the ABNF describes syntax for value notation that should be familiar to readers from programming languages, with the possible exception of h'..' and b64'..' for byte strings, as well as syntactic elements such as comments and line ends. Appendix D. Standard Prelude This appendix is normative. The following prelude is automatically added to each CDDL file. (Note that technically, it is a postlude, as it does not disturb the selection of the first rule as the root of the definition.) any = # uint = #0 nint = #1 int = uint / nint bstr = #2 bytes = bstr tstr = #3 text = tstr tdate = #6.0(tstr) time = #6.1(number) number = int / float biguint = #6.2(bstr) bignint = #6.3(bstr) bigint = biguint / bignint integer = int / bigint unsigned = uint / biguint decfrac = #6.4([e10: int, m: integer]) bigfloat = #6.5([e2: int, m: integer]) eb64url = #6.21(any) eb64legacy = #6.22(any) eb16 = #6.23(any) encoded-cbor = #6.24(bstr) uri = #6.32(tstr) b64url = #6.33(tstr) b64legacy = #6.34(tstr) regexp = #6.35(tstr) mime-message = #6.36(tstr) cbor-any = #6.55799(any) Birkholz, et al. Standards Track [Page 52] RFC 8610 CDDL June 2019 float16 = #7.25 float32 = #7.26 float64 = #7.27 float16-32 = float16 / float32 float32-64 = float32 / float64 float = float16-32 / float64 false = #7.20 true = #7.21 bool = false / true nil = #7.22 null = nil undefined = #7.23 Figure 14: CDDL Prelude Note that the prelude is deemed to be fixed. This means, for instance, that additional tags beyond those defined in [RFC7049], as registered, need to be defined in each CDDL file that is using them. A common stumbling point is that the prelude does not define a type "string". CBOR has byte strings ("bytes" in the prelude) and text strings ("text"), so a type that is simply called "string" would be ambiguous. Appendix E. Use with JSON This appendix is normative. The JSON generic data model (implicit in [RFC8259]) is a subset of the generic data model of CBOR. So, one can use CDDL with JSON by limiting oneself to what can be represented in JSON. Roughly speaking, this means leaving out byte strings, tags, and simple values other than "false", "true", and "null", leading to the following limited prelude: Birkholz, et al. Standards Track [Page 53] RFC 8610 CDDL June 2019 any = # uint = #0 nint = #1 int = uint / nint tstr = #3 text = tstr number = int / float float16 = #7.25 float32 = #7.26 float64 = #7.27 float16-32 = float16 / float32 float32-64 = float32 / float64 float = float16-32 / float64 false = #7.20 true = #7.21 bool = false / true nil = #7.22 null = nil Figure 15: JSON-Compatible Subset of CDDL Prelude (The major types given here do not have a direct meaning in JSON, but they can be interpreted as CBOR major types translated through Section 4 of [RFC7049].) There are a few fine points in using CDDL with JSON. First, JSON does not distinguish between integers and floating-point numbers; there is only one kind of number (which may happen to be integral). In this context, specifying a type as "uint", "nint", or "int" then becomes a predicate that the number be integral. As an example, this means that the following JSON numbers are all matching "uint": 10 10.0 1e1 1.0e1 100e-1 (The fact that these are all integers may be surprising to users accustomed to the long tradition in programming languages of using decimal points or exponents in a number to indicate a floating-point literal.) CDDL distinguishes the various CBOR number types, but there is only one number type in JSON. The effect of specifying a floating-point precision (float16/float32/float64) is only to restrict the set of Birkholz, et al. Standards Track [Page 54] RFC 8610 CDDL June 2019 permissible values to those expressible with binary16/binary32/ binary64; this is unlikely to be very useful when using CDDL for specifying JSON data structures. Fundamentally, the number system of JSON itself is based on decimal numbers and decimal fractions and does not have limits to its precision or range. In practice, JSON numbers are often parsed into a number type that is called "float64" here, creating a number of limitations to the generic data model [RFC7493]. In particular, this means that integers can only be expressed with interoperable exactness when they lie in the range [-(2**53)+1, (2**53)-1] -- a smaller range than that covered by CDDL "int". JSON applications that want to stay compatible with I-JSON ("Internet JSON"; see [RFC7493]) may therefore want to define integer types with more limited ranges, such as in Figure 16. Note that the types given here are not part of the prelude; they need to be copied into the CDDL specification if needed. ij-uint = 0..9007199254740991 ij-nint = -9007199254740991..-1 ij-int = -9007199254740991..9007199254740991 Figure 16: I-JSON Types for CDDL (Not Part of Prelude) JSON applications that do not need to stay compatible with I-JSON and that actually may need to go beyond the 64-bit unsigned and negative integers supported by "int" (= "uint"/"nint") may want to use the following additional types from the standard prelude, which are expressed in terms of tags but can straightforwardly be mapped into JSON (but not I-JSON) numbers: biguint = #6.2(bstr) bignint = #6.3(bstr) bigint = biguint / bignint integer = int / bigint unsigned = uint / biguint CDDL at this point does not have a way to express the unlimited floating-point precision that is theoretically possible with JSON; at the time of writing, this is rarely used in protocols in practice. Note that a data model described in CDDL is always restricted by what can be expressed in the serialization; e.g., floating-point values such as NaN (not a number) and the infinities cannot be represented in JSON even if they are allowed in the CDDL generic data model. Birkholz, et al. Standards Track [Page 55] RFC 8610 CDDL June 2019 Appendix F. A CDDL Tool This appendix is for information only. A rough CDDL tool is available. For CDDL specifications, it can check the syntax, generate one or more instances (expressed in CBOR diagnostic notation or in pretty-printed JSON), and validate an existing instance against the specification: Usage: cddl spec.cddl generate [n] cddl spec.cddl json-generate [n] cddl spec.cddl validate instance.cbor cddl spec.cddl validate instance.json Figure 17: CDDL Tool Usage Install on a system with a modern Ruby via: gem install cddl Figure 18: CDDL Tool Installation The accompanying CBOR diagnostic tools (which are automatically installed by the above) are described in ; they can be used to convert between binary CBOR, a pretty-printed hexadecimal form of binary CBOR, CBOR diagnostic notation, JSON, and YAML [YAML]. Appendix G. Extended Diagnostic Notation This appendix is normative. Section 6 of [RFC7049] defines a "diagnostic notation" in order to be able to converse about CBOR data items without having to resort to binary data. Diagnostic notation is based on JSON, with extensions for representing CBOR constructs such as binary data and tags. (Standardizing this together with the actual interchange format does not serve to create another interchange format but enables the use of a shared diagnostic notation in tools for and documents about CBOR.) This appendix discusses a few extensions to the diagnostic notation that have turned out to be useful since RFC 7049 was written. We refer to the result as Extended Diagnostic Notation (EDN). Birkholz, et al. Standards Track [Page 56] RFC 8610 CDDL June 2019 G.1. Whitespace in Byte String Notation Examples often benefit from some whitespace (spaces, line breaks) in byte strings. In EDN, whitespace is ignored in prefixed byte strings; for instance, the following are equivalent: h'48656c6c6f20776f726c64' h'48 65 6c 6c 6f 20 77 6f 72 6c 64' h'4 86 56c 6c6f 20776 f726c64' G.2. Text in Byte String Notation Diagnostic notation notates byte strings in one of the base encodings per [RFC4648], enclosed in single quotes, prefixed by >h< for base16, >b32< for base32, >h32< for base32hex, or >b64< for base64 or base64url. Quite often, byte strings carry bytes that are meaningfully interpreted as UTF-8 text. EDN allows the use of single quotes without a prefix to express byte strings with UTF-8 text; for instance, the following are equivalent: 'hello world' h'68656c6c6f20776f726c64' The escaping rules of JSON strings are applied equivalently for text-based byte strings, e.g., "\" stands for a single backslash and "'" stands for a single quote. Whitespace is included literally, i.e., the previous section does not apply to text-based byte strings. G.3. Embedded CBOR and CBOR Sequences in Byte Strings Where a byte string is to carry an embedded CBOR-encoded item, or more generally a sequence of zero or more such items, the diagnostic notation for these zero or more CBOR data items, separated by commas, can be enclosed in << and >> to notate the byte string resulting from encoding the data items and concatenating the result. For instance, each pair of columns in the following are equivalent: <<1>> h'01' <<1, 2>> h'0102' <<"foo", null>> h'63666F6FF6' <<>> h'' Birkholz, et al. Standards Track [Page 57] RFC 8610 CDDL June 2019 G.4. Concatenated Strings While the ability to include whitespace enables line-breaking of encoded byte strings, a mechanism is needed to be able to include text strings as well as byte strings in direct UTF-8 representation into line-based documents (such as RFCs and source code). We extend the diagnostic notation by allowing multiple text strings or multiple byte strings to be notated separated by whitespace; these are then concatenated into a single text or byte string, respectively. Text strings and byte strings do not mix within such a concatenation, except that byte string notation can be used inside a sequence of concatenated text string notation to encode characters that may be better represented in an encoded way. The following four values are equivalent: "Hello world" "Hello " "world" "Hello" h'20' "world" "" h'48656c6c6f20776f726c64' "" Similarly, the following byte string values are equivalent: 'Hello world' 'Hello ' 'world' 'Hello ' h'776f726c64' 'Hello' h'20' 'world' '' h'48656c6c6f20776f726c64' '' b64'' h'4 86 56c 6c6f' h' 20776 f726c64' (Note that the approach of separating by whitespace, while familiar from the C language, requires some attention -- a single comma makes a big difference here.) Birkholz, et al. Standards Track [Page 58] RFC 8610 CDDL June 2019 G.5. Hexadecimal, Octal, and Binary Numbers In addition to JSON's decimal numbers, EDN provides hexadecimal, octal, and binary numbers in the usual C-language notation (octal with 0o prefix present only). The following are equivalent: 4711 0x1267 0o11147 0b1001001100111 As are: 1.5 0x1.8p0 0x18p-4 G.6. Comments Longer pieces of diagnostic notation may benefit from comments. JSON famously does not provide for comments, and basic diagnostic notation per RFC 7049 inherits this property. In EDN, comments can be included, delimited by slashes ("/"). Any text within and including a pair of slashes is considered a comment. Comments are considered whitespace. Hence, they are allowed in prefixed byte strings; for instance, the following are equivalent: h'68656c6c6f20776f726c64' h'68 65 6c /doubled l!/ 6c 6f /hello/ 20 /space/ 77 6f 72 6c 64' /world/ This can be used to annotate a CBOR structure as in: /grasp-message/ [/M_DISCOVERY/ 1, /session-id/ 10584416, /objective/ [/objective-name/ "opsonize", /D, N, S/ 7, /loop-count/ 105]] (There are currently no end-of-line comments. If we want to add them, "//" sounds like a reasonable delimiter given that we already use slashes for comments, but we could also go, for example, for "#".) Birkholz, et al. Standards Track [Page 59] RFC 8610 CDDL June 2019 Appendix H. Examples This appendix is for information only. This appendix contains a few examples of structures defined using CDDL. The theme for the examples is taken from [RFC7071], which defines certain JSON structures in English. For a similar example, it may also be of interest to examine Appendix A of [RFC8007], which contains a CDDL definition for a JSON structure defined in the main body of that RFC. These examples all happen to describe data that is interchanged in JSON. Examples for CDDL definitions of data that is interchanged in CBOR can be found in [RFC8152], [GRASP], and [RFC8428]. [RFC7071] defines the "reputon" structure for JSON using somewhat formalized English text. Here is a (somewhat verbose) equivalent definition using the same terms, but notated in CDDL: reputation-object = { reputation-context, reputon-list } reputation-context = ( application: text ) reputon-list = ( reputons: reputon-array ) reputon-array = [* reputon] reputon = { rater-value, assertion-value, rated-value, rating-value, ? conf-value, ? normal-value, ? sample-value, ? gen-value, ? expire-value, * ext-value, } Birkholz, et al. Standards Track [Page 60] RFC 8610 CDDL June 2019 rater-value = ( rater: text ) assertion-value = ( assertion: text ) rated-value = ( rated: text ) rating-value = ( rating: float16 ) conf-value = ( confidence: float16 ) normal-value = ( normal-rating: float16 ) sample-value = ( sample-size: uint ) gen-value = ( generated: uint ) expire-value = ( expires: uint ) ext-value = ( text => any ) An equivalent, more compact form of this example would be: reputation-object = { application: text reputons: [* reputon] } reputon = { rater: text assertion: text rated: text rating: float16 ? confidence: float16 ? normal-rating: float16 ? sample-size: uint ? generated: uint ? expires: uint * text => any } Note how this rather clearly delineates the structure somewhat shrouded by so many words in Section 6.2.2 of [RFC7071]. Also, this definition makes it clear that several ext-values are allowed (by definition with different member names); RFC 7071 could be read to forbid the repetition of ext-value ("A specific reputon-element MUST NOT appear more than once" is ambiguous). Birkholz, et al. Standards Track [Page 61] RFC 8610 CDDL June 2019 The CDDL tool described in Appendix F generates as one example: { "application": "conchometry", "reputons": [ { "rater": "Ephthianura", "assertion": "codding", "rated": "sphaerolitic", "rating": 0.34133473256800795, "confidence": 0.9481983064298332, "expires": 1568, "unplaster": "grassy" }, { "rater": "nonchargeable", "assertion": "raglan", "rated": "alienage", "rating": 0.5724646875815566, "sample-size": 3514, "Aldebaran": "unchurched", "puruloid": "impersonable", "uninfracted": "pericarpoidal", "schorl": "Caro" }, { "rater": "precollectable", "assertion": "Merat", "rated": "thermonatrite", "rating": 0.19164006323936977, "confidence": 0.6065252103391268, "normal-rating": 0.5187773690879303, "generated": 899, "speedy": "solidungular", "noviceship": "medicine", "checkrow": "epidictic" } ] } Birkholz, et al. Standards Track [Page 62] RFC 8610 CDDL June 2019 Acknowledgements Inspiration was taken from the C and Pascal languages, MPEG's conventions for describing structures in the ISO base media file format, RELAX NG and its compact syntax [RELAXNG], and, in particular, Andrew Lee Newton's early proposals on JSON Content Rules (JCR) as found in draft version four (-04) of [JCR]. Lots of highly useful feedback came from members of the IETF CBOR WG -- in particular, Ari Keranen, Brian Carpenter, Burt Harris, Jeffrey Yasskin, Jim Hague, Jim Schaad, Joe Hildebrand, Max Pritikin, Michael Richardson, Pete Cordell, Sean Leonard, and Yaron Sheffer. Also, Francesca Palombini and Joe volunteered to chair the WG when it was created, providing the framework for generating and processing this feedback, with Barry Leiba having taken over from Joe since then. Chris Lonvick and Ines Robles provided additional reviews during IESG processing, and Alexey Melnikov steered the process as the responsible Area Director. The CDDL tool described in Appendix F was written by Carsten Bormann, building on previous work by Troy Heninger and Tom Lord. Contributors CDDL was originally conceived by Bert Greevenbosch, who also wrote the original five draft versions of this document. Birkholz, et al. Standards Track [Page 63] RFC 8610 CDDL June 2019 Authors' Addresses Henk Birkholz Fraunhofer SIT Rheinstrasse 75 Darmstadt 64295 Germany Email: henk.birkholz@sit.fraunhofer.de Christoph Vigano Universitaet Bremen Email: christoph.vigano@uni-bremen.de Carsten Bormann Universitaet Bremen TZI Bibliothekstr. 1 Bremen D-28359 Germany Phone: +49-421-218-63921 Email: cabo@tzi.org Birkholz, et al. Standards Track [Page 64]