rfc6652









Internet Engineering Task Force (IETF)                      S. Kitterman
Request for Comments: 6652                                         Agari
Updates: 4408                                                  June 2012
Category: Standards Track
ISSN: 2070-1721


     Sender Policy Framework (SPF) Authentication Failure Reporting
                    Using the Abuse Reporting Format

Abstract

   This memo presents extensions to the Abuse Reporting Format (ARF) and
   Sender Policy Framework (SPF) specifications to allow for detailed
   reporting of message authentication failures in an on-demand fashion.

   This memo updates RFC 4408 by providing an IANA registry for SPF
   modifiers.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc6652.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.




Kitterman                    Standards Track                    [Page 1]

RFC 6652               SPF Auth Failure Reporting              June 2012


Table of Contents

   1. Introduction ....................................................2
   2. Definitions .....................................................3
      2.1. Key Words ..................................................3
      2.2. Imported Definitions .......................................3
   3. Optional Reporting Address for SPF ..............................3
   4. Requested Reports ...............................................4
      4.1. Requested Reports for SPF Failures .........................5
   5. IANA Considerations .............................................5
      5.1. SPF Modifier Registration ..................................5
   6. Security Considerations .........................................6
      6.1. Identity Selection .........................................6
      6.2. Report Volume ..............................................6
   7. References ......................................................7
      7.1. Normative References .......................................7
      7.2. Informative References .....................................7
   Appendix A. Acknowledgements .......................................8
   Appendix B. Examples ...............................................8
      B.1. SPF DNS Record for Domain That Sends No Mail but
           Requests Reports ...........................................8
      B.2. Minimal SPF DNS Record Change to Add a Reporting
           Address ....................................................8
      B.3. SPF DNS Record with Reporting Address, Report
           Percentage, and Requested Report Type ......................8

1.  Introduction

   The Abuse Reporting Format [ARF] defines a message format for sending
   reports of abuse in the messaging infrastructure, with an eye toward
   automating both the generation and consumption of those reports.

   The Sender Policy Framework [SPF] is one mechanism for message sender
   authentication; it is "path-based", meaning it authenticates the
   route that a message took from origin to destination.  The output is
   a verified domain name that can then be subjected to some sort of
   evaluation process (e.g., comparison to a known-good list, submission
   to a reputation service, etc.).

   This document extends [SPF] to add an optional reporting address and
   other parameters.  Extension of [ARF] to add features required for
   the reporting of these incidents is covered in [ARF-AUTHFAIL] and
   [ARF-AS].

   This document additionally creates a an IANA registry of [SPF] record
   modifiers to avoid modifier namespace collisions.





Kitterman                    Standards Track                    [Page 2]

RFC 6652               SPF Auth Failure Reporting              June 2012


2.  Definitions

2.1.  Key Words

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [KEYWORDS].

2.2.  Imported Definitions

   The [ABNF] token "qp-section" is defined in [MIME].

   "local-part" is defined in [MAIL].

   "addr-spec" is defined in [MAIL].

3.  Optional Reporting Address for SPF

   There exist cases in which an ADministrative Management Domain (ADMD)
   (see [EMAIL-ARCH]) employing [SPF] for announcing sending practices
   may want to know when messages are received via unauthorized routing.
   Currently, there is no such method defined in conjunction with
   standardized approaches such as [ARF].  Similar information can be
   gathered using a specially crafted [SPF] record and a special DNS
   server to track [SPF] record lookups.

   This document defines the following optional "modifier" (as defined
   in Section 4.6.1 of [SPF]) to SPF records, using the form defined in
   that specification:

   ra=  Reporting Address (plain-text; OPTIONAL; no default).  MUST be a
        local-part (see Section 3.4.1 of [MAIL]) specifying an e-mail
        address to which a report SHOULD be sent when mail claiming to
        be from this domain (see Section 2.4 of [SPF] for a description
        of how domains are identified for SPF checks) has failed the
        evaluation algorithm described in [SPF], in particular because a
        message arrived via an unauthorized route.  To generate a
        complete address to which the report is sent, the Verifier
        simply appends to this value an "@" followed by the
        SPF-compliant domain per Section 4.1 of [SPF].  ra= modifiers in
        a record that was reached by following an "include" mechanism
        (defined in Section 5.2 of [SPF]) MUST be ignored.

      ABNF:

      spf-report-tag = "ra=" qp-section





Kitterman                    Standards Track                    [Page 3]

RFC 6652               SPF Auth Failure Reporting              June 2012


   rp=  Requested Report Percentage (plain-text; OPTIONAL; default is
        "100").  The value is an integer from 0 to 100 inclusive that
        indicates what percentage of incidents of SPF failures, selected
        at random, are to cause reports to be generated.  The report
        generator SHOULD NOT issue reports for more than the requested
        percentage of incidents.  An exception to this might be some
        out-of-band arrangement between two parties to override it with
        some mutually agreed value.  Report generators MAY make use of
        the "Incidents:" field in [ARF] to indicate that there are more
        reportable incidents than there are reports.

      ABNF:

      spf-rp-tag = "rp=" 1*12DIGIT "/" 1*12DIGIT

   rr=  Requested Reports (plain-text; OPTIONAL; default is "all").  The
        value MUST be a colon-separated list of tokens representing
        those conditions under which a report is desired.  See
        Section 4.1 for a list of valid tags.

      ABNF:

      spf-rr-type = ( "all" / "e" / "f" / "s" / "n" )

      spf-rr-tag = "rr=" spf-rr-type *( ":" spf-rr-type )

   In the absence of an "ra=" tag in the SPF record, the "rp=" and "rr="
   tags MUST be ignored, and the report generator MUST NOT issue a
   report.

4.  Requested Reports

   This memo also includes, as the "rr" tokens defined above, the means
   by which the sender can request reports for specific circumstances of
   interest.  Verifiers MUST NOT generate reports for incidents that do
   not match a requested report and MUST ignore requests for reports not
   included in this list.














Kitterman                    Standards Track                    [Page 4]

RFC 6652               SPF Auth Failure Reporting              June 2012


4.1.  Requested Reports for SPF Failures

   The following report requests are defined for SPF results:

   all  All reports are requested.

   e    Reports are requested for messages that produced an SPF result
        of "TempError" or "PermError".

   f    Reports are requested for messages that produced an SPF result
        of "Fail".

   s    Reports are requested for messages that produced an SPF result
        of "SoftFail".

   n    Reports are requested for messages that produced an SPF result
        of "Neutral" or "None".

5.  IANA Considerations

   As required by [IANA-CONS], this section contains registry
   information for the new [SPF] modifiers.

5.1.  SPF Modifier Registration

   IANA has created the Modifier Names registry under Sender Policy
   Framework Parameters, to include a list of all registered SPF
   modifier names and their defining documents.

   New registrations or updates are to be published in accordance with
   the "Specification Required" guidelines as described in [IANA-CONS].
   New registrations and updates MUST contain the following information:

   1.  Name of the modifier being registered or updated

   2.  The document in which the specification of the modifier is
       published

   3.  New or updated status, which MUST be one of the following:

       Current:  The field is in current use

       Deprecated:  The field might be in current use but its use is
          discouraged

       Historic:  The field is no longer in current use





Kitterman                    Standards Track                    [Page 5]

RFC 6652               SPF Auth Failure Reporting              June 2012


   An update may make a notation on an existing registration indicating
   that a registered field is historic or deprecated if appropriate.

                 +------------+-----------------+---------+
                 | MODIFIER   | REFERENCE       | STATUS  |
                 +------------+-----------------+---------+
                 | exp        | RFC 4408        | Current |
                 | redirect   | RFC 4408        | Current |
                 | ra         | (this document) | Current |
                 | rp         | (this document) | Current |
                 | rr         | (this document) | Current |
                 +------------+-----------------+---------+

6.  Security Considerations

   Inherited considerations: implementers are advised to consider the
   Security Considerations sections of [SPF], [ARF], [ARF-AS], and
   [ARF-AUTHFAIL].

   In addition to the advice in the Security Considerations section of
   [ARF-AS], these additional considerations apply to the generation of
   [SPF] authentication failure reports:

6.1.  Identity Selection

   Preventing an [SPF] failure for SPF authentication failure reports is
   essential to mitigate the risk of data loops.

      If the [SMTP] return address to be used will not be the NULL
      return address, i.e., "MAIL FROM:<>", then the selected return
      address MUST be selected such that it will pass [SPF] MAIL FROM
      checks upon initial receipt.

      If the report is passed to the Message Submission Agent (MSA) (MSA
      is described in [EMAIL-ARCH] using [SMTP]), the HELO/EHLO command
      parameter SHOULD also be selected so that it will pass [SPF] HELO
      checks.

6.2.  Report Volume

   It is impossible to predict the volume of reports this facility will
   generate when enabled by a report receiver.  An implementer ought to
   anticipate substantial volume, since the amount of abuse occurring at
   receivers cannot be known ahead of time, and may vary rapidly and
   unpredictably.






Kitterman                    Standards Track                    [Page 6]

RFC 6652               SPF Auth Failure Reporting              June 2012


7.  References

7.1.  Normative References

   [ABNF]     Crocker, D., Ed., and P. Overell, "Augmented BNF for
              Syntax Specifications: ABNF", STD 68, RFC 5234,
              January 2008.

   [ARF]      Shafranovich, Y., Levine, J., and M. Kucherawy, "An
              Extensible Format for Email Feedback Reports", RFC 5965,
              August 2010.

   [ARF-AS]   Falk, J. and M. Kucherawy, Ed., "Creation and Use of Email
              Feedback Reports: An Applicability Statement for the Abuse
              Reporting Format (ARF)", RFC 6650, June 2012.

   [ARF-AUTHFAIL]
              Fontana, H., "Authentication Failure Reporting Using the
              Abuse Reporting Format", RFC 6591, April 2012.

   [IANA-CONS]
              Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [MAIL]     Resnick, P., Ed., "Internet Message Format", RFC 5322,
              October 2008.

   [MIME]     Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [SMTP]     Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
              October 2008.

   [SPF]      Wong, M. and W. Schlitt, "Sender Policy Framework (SPF)
              for Authorizing Use of Domains in E-Mail, Version 1",
              RFC 4408, April 2006.

7.2.  Informative References

   [EMAIL-ARCH]
              Crocker, D., "Internet Mail Architecture", RFC 5598,
              July 2009.




Kitterman                    Standards Track                    [Page 7]

RFC 6652               SPF Auth Failure Reporting              June 2012


Appendix A.  Acknowledgements

   The author wishes to acknowledge the following for their review and
   constructive criticism of this proposal: Murray Kucherawy, Tim
   Draegen, Julian Mehnle, and John Levine.

Appendix B.  Examples

B.1.  SPF DNS Record for Domain That Sends No Mail but Requests Reports

   v=spf1 ra=postmaster -all

B.2.  Minimal SPF DNS Record Change to Add a Reporting Address

   v=spf1 mx:example.org ra=postmaster -all

B.3.  SPF DNS Record with Reporting Address, Report Percentage, and
      Requested Report Type

   v=spf1 mx:example.org -all ra=postmaster rp=10 rr=e

Author's Address

   Scott Kitterman
   Agari
   3611 Scheel Dr.
   Ellicott City, MD  21042
   US

   Phone: +1 301 325 5475
   EMail: scott@kitterman.com




















Kitterman                    Standards Track                    [Page 8]



ERRATA