Internet DRAFT - draft-ietf-dime-diameter-base-protocol-mib
draft-ietf-dime-diameter-base-protocol-mib
Network Working Group G. Zorn
Internet-Draft Network Zen
Intended status: Standards Track S. Comerica
Expires: December 16, 2011 Juniper Networks
June 14, 2011
Diameter Base Protocol MIB
draft-ietf-dime-diameter-base-protocol-mib-06.txt
Abstract
Along with providing support for certain basic authentication,
authorization and accounting functions, the Diameter protocol is
designed to provide a framework for AAA applications.
This document defines the Management Information Base (MIB) module
which describes the minimum set of objects needed to manage an
implementation of the Diameter protocol.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 16, 2011.
Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Zorn & Comerica Expires December 16, 2011 [Page 1]
Internet-Draft Diameter Base Protocol MIB June 2011
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Table of Contents
1. The Internet-Standard Management Framework . . . . . . . . . . 3
2. Requirements Language . . . . . . . . . . . . . . . . . . . . 3
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Diameter Base Protocol MIB Definitions . . . . . . . . . . . . 3
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 48
6. Security Considerations . . . . . . . . . . . . . . . . . . . 48
7. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 49
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 49
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 49
9.1. Normative References . . . . . . . . . . . . . . . . . . . 49
9.2. Informative References . . . . . . . . . . . . . . . . . . 50
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 50
Zorn & Comerica Expires December 16, 2011 [Page 2]
Internet-Draft Diameter Base Protocol MIB June 2011
1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58
([RFC2578], [RFC2579], [RFC2580]). In particular, it describes
managed objects used for managing the base Diameter protocol
[I-D.ietf-dime-rfc3588bis].
2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
3. Overview
This MIB defines objects supporting the management of the Diameter
base protocol as defined in RFC 3588 [I-D.ietf-dime-rfc3588bis].
Objects related to Diameter applications are defined in separate
documents.
4. Diameter Base Protocol MIB Definitions
DIAMETER-BASE-PROTOCOL-MIB DEFINITIONS ::= BEGIN
IMPORTS
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB -- [RFC4001]
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
Counter32,
Unsigned32,
Gauge32,
Zorn & Comerica Expires December 16, 2011 [Page 3]
Internet-Draft Diameter Base Protocol MIB June 2011
TimeTicks
FROM SNMPv2-SMI -- [RFC2578]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
NOTIFICATION-GROUP,
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
RowStatus,
TruthValue,
StorageType
FROM SNMPv2-TC; -- [RFC2579]
diameterBaseProtocolMIB MODULE-IDENTITY
LAST-UPDATED "201105040000Z" -- 4 May 2011
ORGANIZATION "IETF dime Working Group."
CONTACT-INFO
"Glen Zorn
Network Zen
227/358 Thanon Sanphawut
Bang Na, Bangkok 10260
Thailand
Email: gwz@net-zen.net"
DESCRIPTION
"The MIB module for entities implementing the
Diameter Base Protocol.
Copyright (c) 2011 IETF Trust and the persons identified
as the document authors. All rights reserved.
The initial version of this MIB module was published
in RFC yyyy; for full legal notices see the RFC itself.
Supplementary information may be available on
http://www.ietf.org/copyrights/ianamib.html."
-- RFC Ed.: replace yyyy with actual RFC number and remove this note
REVISION "201105040000Z" -- 4 May 2011
DESCRIPTION "Initial version as published in RFC yyyy"
-- RFC Ed.: replace yyyy with actual RFC number and remove this note
::= { mib-2 119 } -- Experimental value assigned by IANA.
-- Top-Level Components of this MIB.
diameterBaseNotifications OBJECT IDENTIFIER ::=
{ diameterBaseProtocolMIB 0 }
diameterBaseObjects OBJECT IDENTIFIER ::=
Zorn & Comerica Expires December 16, 2011 [Page 4]
Internet-Draft Diameter Base Protocol MIB June 2011
{ diameterBaseProtocolMIB 1 }
diameterBaseConform OBJECT IDENTIFIER ::=
{ diameterBaseProtocolMIB 2 }
dbpLocalCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 1 }
dbpLocalStats OBJECT IDENTIFIER ::= { diameterBaseObjects 2 }
dbpPeerCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 3 }
dbpPeerStats OBJECT IDENTIFIER ::= { diameterBaseObjects 4 }
dbpRealmCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 5 }
dbpRealmStats OBJECT IDENTIFIER ::= { diameterBaseObjects 6 }
dbpNotifCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 7 }
-- Textual Conventions
ServiceType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An enumerated value which provides an indication of the
type of services supported for each Diameter application:
accounting, authentication or both.
SYNTAX INTEGER { acct(1),
auth(2),
both(3) }
}
-- Protocol Error Notifications
dbpProtocolErrorNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpProtocolErrorNotif notification.
The value persists across resets."
DEFVAL {false}
::= { dbpNotifCfgs 1 }
dbpProtocolErrorNotif NOTIFICATION-TYPE
OBJECTS {
dbpPeerId,
dbpPerPeerStatsProtocolErrors
}
Zorn & Comerica Expires December 16, 2011 [Page 5]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"An dbpProtocolError Notification is sent when both the
following conditions are true:
1) the value of dbpProtocolErrorNotifEnabled is True(1)
2) the value of dbpPerPeerStatsProtocolErrors changes
An agent must not generate more than one
dbpProtocolError 'notification event' in a five second
period, where a 'notification event' is the
transmission of a single Notification PDU to a list of
Notification destinations.
If additional protocol errors occur within the
five second 'throttling' period, then these
notification events should be suppressed by the agent.
An NMS should periodically check the value of
dbpPerPeerStatsProtocolErrors to detect any missed
dbpProtocolError notification events, e.g. due to
throttling or transmission loss."
::= { diameterBaseNotifications 1 }
-- Transient Error Notifications
dbpTransientFailureNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpTransientFailure Notification.
The value persists across resets."
::= { dbpNotifCfgs 2 }
dbpTransientFailureNotif NOTIFICATION-TYPE
OBJECTS {
dbpPeerId,
dbpPerPeerStatsTransientFailures
}
STATUS current
DESCRIPTION
"An dbpTransientFailure Notification is sent when both
the following conditions are true:
1) the value of dbpTransientFailureNotifEnabled
is True(1)
2) the value of dbpPerPeerStatsTransientFailures
changes
An agent must not generate more than one
dbpTransientFailure 'notification event' in a five
Zorn & Comerica Expires December 16, 2011 [Page 6]
Internet-Draft Diameter Base Protocol MIB June 2011
second period, where a 'notification event' is the
transmission of a single notification PDU to a list
of notification destinations.
If additional transient failures occur
within the five second 'throttling' period, then
these notification events should be suppressed
by the agent.
An NMS should periodically check the value of
dbpPerPeerStatsTransientFailures to detect any
missed dbpTransientFailure notification events,
e.g. due to throttling or transmission loss."
::= { diameterBaseNotifications 2 }
-- Permanent Failure Notifications
dbpPermanentFailureNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpPermanentFailure notification.
The value persists across resets."
DEFVAL { false }
::= { dbpNotifCfgs 3 }
dbpPermanentFailureNotif NOTIFICATION-TYPE
OBJECTS {
dbpPeerId,
dbpPerPeerStatsPermanentFailures
}
STATUS current
DESCRIPTION
"An dbpPermanentFailure notification is sent when
both the following conditions are true:
1) the value of dbpPermanentFailureNotifEnabled
is True(1)
2) the value of dbpPerPeerStatsPermanentFailures
changes
An agent must not generate more than one
dbpPermanentFailure 'notification event' in a five
second period, where a 'notification event' is the
transmission of a single notification PDU to a list
of notification destinations.
If additional permanent failures occur within the
five second 'throttling' period, then these
trap-events should be suppressed by the agent.
Zorn & Comerica Expires December 16, 2011 [Page 7]
Internet-Draft Diameter Base Protocol MIB June 2011
An NMS should periodically check the value of
dbpPerPeerStatsPermanentFailures to detect
any missed dbpPermanentFailure trap-events,
e.g. due to throttling or transmission loss."
::= { diameterBaseNotifications 3 }
-- Connection Down Notifs
dbpPeerConnectionDownNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpPeerConnectionDown notification.
The value persists across resets."
DEFVAL { false }
::= { dbpNotifCfgs 4 }
dbpPeerConnectionDownNotif NOTIFICATION-TYPE
OBJECTS {
dbpLocalId,
dbpPeerId
}
STATUS current
DESCRIPTION
"An dbpPeerConnectionDown notification is sent when
both the following conditions are true:
1) the value of dbpPeerConnectionDownNotifEnabled is
True(1)
2) dbpPerPeerStatsState changes to closed(1)
An agent must not generate more than one
dbpPeerConnectionDown
'notification event' in a five second period, where a
'notification event' is the transmission of a single
notification PDU to a list of notification
destinations.
If additional 'transport down' events occur within the
five second 'throttling' period, then these trap-events
should be suppressed by the agent."
::= { diameterBaseNotifications 4 }
-- Connection Up Notifications
dbpPeerConnectionUpNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
Zorn & Comerica Expires December 16, 2011 [Page 8]
Internet-Draft Diameter Base Protocol MIB June 2011
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpPeerConnectionUp notification.
The value persists across resets."
DEFVAL { false }
::= { dbpNotifCfgs 5 }
dbpPeerConnectionUpNotif NOTIFICATION-TYPE
OBJECTS {
dbpLocalId,
dbpPeerId
}
STATUS current
DESCRIPTION
"An dbpPeerConnectionUp notification is sent
when both thefollowing conditions are true:
1) the value of dbpPeerConnectionUpNotifEnabled is
True(1)
2) the value of dbpPerPeerStatsState changes to
either rOpen(6)or iOpen(7)
An agent must not generate
more than one dbpPeerConnectionUp
'notification event' in a
five second period, where a 'notification event' is the
transmission of a single notification PDU to a
list of notification destinations.
If additional 'connection up' events
occur within the five second 'throttling' period,
then these trap-events should be suppressed by the
agent."
::= { diameterBaseNotifications 5 }
-- Local Configs
dbpLocalId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation-specific identification
string for the Diameter software in use on
the system; for example: 'diameterd'"
::= { dbpLocalCfgs 1 }
dbpLocalTcpListenPort OBJECT-TYPE
Zorn & Comerica Expires December 16, 2011 [Page 9]
Internet-Draft Diameter Base Protocol MIB June 2011
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Diameter TCP 'listen' port."
::= { dbpLocalCfgs 3 }
dbpLocalSctpListenPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Diameter SCTP 'listen' port."
::= { dbpLocalCfgs 4 }
dbpLocalOriginHost OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object represents the host name of
the local peer.
The value persists across resets."
DEFVAL { "" }
::= { dbpLocalCfgs 5 }
dbpLocalRealm OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object represents the Local Realm Name."
DEFVAL { "" }
::= { dbpLocalCfgs 6 }
dbpLocalStatsTotalMessagesIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Diameter Base Protocol
messages received since the last reset."
::= { dbpLocalStats 1 }
dbpLocalStatsTotalMessagesOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Zorn & Comerica Expires December 16, 2011 [Page 10]
Internet-Draft Diameter Base Protocol MIB June 2011
"The total number of Diameter Base Protocol
messages transmitted since the last reset."
::= { dbpLocalStats 2 }
dbpLocalStatsTotalUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total amount of
time this Diameter peer has been up from the
beginning of time until now. The value is cumulative
and persists over resets."
::= { dbpLocalStats 3 }
dbpLocalResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the peer keeps persistent state (e.g., a process)
and supports a 'reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
peer was 'reset'. For software that does not
have persistence or does not support a 'reset'
operation, this value is undefined."
::= { dbpLocalStats 4 }
dbpLocalConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
initializing(2),
running(3),
reset(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
local state. When set to reset(4), any persistent
local state (such as a process) is reinitialized as
if the software had just been started. This value will
never be returned by a read operation. When read,
one of the following values will be returned:
other(1) - peer in some unknown state;
initializing(2) - peer (re)initializing;
running(3) - peer currently running."
DEFVAL { other }
::= { dbpLocalStats 5 }
Zorn & Comerica Expires December 16, 2011 [Page 11]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpLocalApplTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpLocalApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter applications
supported by this peer."
::= { dbpLocalCfgs 7 }
dbpLocalApplEntry OBJECT-TYPE
SYNTAX DbpLocalApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
application on this peer."
INDEX { dbpLocalApplIndex }
::= { dbpLocalApplTable 1 }
DbpLocalApplEntry ::= SEQUENCE {
dbpLocalApplIndex Unsigned32,
dbpLocalApplStorageType StorageType,
dbpLocalApplRowStatus RowStatus
}
dbpLocalApplIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying a
supported Diameter application. Upon reload,
dbpLocalApplIndex values may be changed."
::= { dbpLocalApplEntry 1 }
dbpLocalApplStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. None of
the columnar objects is writable when the conceptual
row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpLocalApplEntry 2 }
dbpLocalApplRowStatus OBJECT-TYPE
Zorn & Comerica Expires December 16, 2011 [Page 12]
Internet-Draft Diameter Base Protocol MIB June 2011
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the dbpLocalApplRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding dbpLocalApplIndex
has been set.
dbpLocalApplIndex may not be modified while
the value of this object is active(1): An attempt
to set these objects while the value of
dbpLocalApplRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with dbpLocalApplRowStatus equal
to active(1) remain in the table until destroyed.
Entries in this table with dbpLocalApplRowStatus equal
to values other than active(1) will be destroyed after
timeout (5 minutes)."
::= { dbpLocalApplEntry 3 }
dbpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing information regarding
the discovered or configured Diameter
peers."
::= { dbpPeerCfgs 1 }
dbpPeerEntry OBJECT-TYPE
SYNTAX DbpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Zorn & Comerica Expires December 16, 2011 [Page 13]
Internet-Draft Diameter Base Protocol MIB June 2011
"A row entry representing a discovered
or configured Diameter peer."
INDEX { dbpPeerIndex }
::= { dbpPeerTable 1 }
DbpPeerEntry ::= SEQUENCE {
dbpPeerIndex Unsigned32,
dbpPeerId SnmpAdminString,
dbpPeerPortConnect Unsigned32,
dbpPeerPortListen Unsigned32,
dbpPeerTransportProtocol Integer32,
dbpPeerSecurity Integer32,
dbpPeerFirmwareRevision SnmpAdminString,
dbpPeerStorageType StorageType,
dbpPeerRowStatus RowStatus }
dbpPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each Diameter peer
with which the local peer communicates.
Upon reload, dbpPeerIndex values may be changed."
::= { dbpPeerEntry 1 }
dbpPeerId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local identifier for the Diameter peer.
It must be unique and non-empty."
::= { dbpPeerEntry 2 }
dbpPeerPortConnect OBJECT-TYPE
SYNTAX Unsigned32 (0|1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connection port used
to connect to the Diameter peer.
If there is no active connection, this
value will be zero(0)."
::= { dbpPeerEntry 3 }
dbpPeerPortListen OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
Zorn & Comerica Expires December 16, 2011 [Page 14]
Internet-Draft Diameter Base Protocol MIB June 2011
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port the peer is listening on."
::= { dbpPeerEntry 4 }
dbpPeerTransportProtocol OBJECT-TYPE
SYNTAX INTEGER { tcp(1),
sctp(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol (tcp/sctp) the
Diameter peer is using."
::= { dbpPeerEntry 5 }
dbpPeerSecurity OBJECT-TYPE
SYNTAX INTEGER { other(1),
tls(2),
ipsec(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security the Diameter peer is using.
other(1) - Unknown Security Protocol
tls(2) - Transport Layer Security Protocol
ipsec(3) - Internet Protocol Security"
DEFVAL { other }
::= { dbpPeerEntry 6 }
dbpPeerFirmwareRevision OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware revision of peer.
If the Entity MIB is supported by
the node, then the contents of this object MUST be
identical to those of the entPhysicalFirmwareRev
object [RFC4133]. If no firmware
revision, the revision of the Diameter software
module may be reported instead."
::= { dbpPeerEntry 7 }
dbpPeerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
Zorn & Comerica Expires December 16, 2011 [Page 15]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Only the dbpPeerPortListen object is writable when
the conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpPeerEntry 8 }
dbpPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the peer entry: creating the entry
enables the peer, destroying the entry disables
the peer."
::= {dbpPeerEntry 9 }
dbpPeerIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPeerIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
peer IP addresses."
::= { dbpPeerCfgs 2 }
dbpPeerIpAddrEntry OBJECT-TYPE
SYNTAX DbpPeerIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a
the IP address of a Diameter peer."
INDEX {
dbpPeerIndex,
dbpPeerIpAddressIndex }
::= { dbpPeerIpAddrTable 1 }
DbpPeerIpAddrEntry ::= SEQUENCE {
dbpPeerIpAddressIndex Unsigned32,
dbpPeerIpAddressType InetAddressType,
dbpPeerIpAddress InetAddress }
dbpPeerIpAddressIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
Zorn & Comerica Expires December 16, 2011 [Page 16]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"A number uniquely identifying an IP Address
supported by this Diameter peer."
::= { dbpPeerIpAddrEntry 1 }
dbpPeerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in dbpPeerIpAddress."
::= {dbpPeerIpAddrEntry 2}
dbpPeerIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active IP Address(es) used for connections."
::= {dbpPeerIpAddrEntry 3}
dbpAppAdvToPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpAppAdvToPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the applications advertised by
this host to each peer and the types of service
supported: accounting, authentication or both."
::= { dbpLocalCfgs 8 }
dbpAppAdvToPeerEntry OBJECT-TYPE
SYNTAX DbpAppAdvToPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered or
configured Diameter peer."
INDEX { dbpPeerIndex,
dbpAppAdvToPeerVendorId,
dbpAppAdvToPeerIndex }
::= { dbpAppAdvToPeerTable 1 }
DbpAppAdvToPeerEntry ::= SEQUENCE {
dbpAppAdvToPeerVendorId Unsigned32,
dbpAppAdvToPeerIndex Unsigned32,
dbpAppAdvToPeerServices ServiceType,
Zorn & Comerica Expires December 16, 2011 [Page 17]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpAppAdvToPeerStorageType StorageType,
dbpAppAdvToPeerRowStatus RowStatus }
dbpAppAdvToPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IANA Enterprise Code value assigned to
the vendor of the Diameter device."
::= { dbpAppAdvToPeerEntry 1 }
dbpAppAdvToPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying a Diameter
application advertised as supported by
this host to each peer. Upon reload,
dbpAppAdvToPeerIndex values may be
changed"
::= { dbpAppAdvToPeerEntry 2 }
dbpAppAdvToPeerServices OBJECT-TYPE
SYNTAX ServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of services supported for each application,
accounting, authentication or both."
::= { dbpAppAdvToPeerEntry 3 }
dbpAppAdvToPeerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpAppAdvToPeerEntry 4 }
dbpAppAdvToPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
Zorn & Comerica Expires December 16, 2011 [Page 18]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"Status of the entry: creating the entry causes the
application to be advertised, destroying the entry
ceases advertisement."
::= { dbpAppAdvToPeerEntry 5 }
-- Applications advertised BY peers
dbpAppAdvFromPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpAppAdvFromPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the applications advertised by
each peer to this host and the types of service
supported: accounting, authentication or both."
::= { dbpPeerCfgs 3 }
dbpAppAdvFromPeerEntry OBJECT-TYPE
SYNTAX DbpAppAdvFromPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered or
configured Diameter peer."
INDEX {
dbpPeerIndex,
dbpAppAdvFromPeerVendorId,
dbpAppAdvFromPeerIndex
}
::= { dbpAppAdvFromPeerTable 1 }
DbpAppAdvFromPeerEntry ::= SEQUENCE {
dbpAppAdvFromPeerVendorId Unsigned32,
dbpAppAdvFromPeerIndex Unsigned32,
dbpAppAdvFromPeerType ServiceType
}
dbpAppAdvFromPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IANA Enterprise Code value assigned to
the vendor of the Diameter application."
::= { dbpAppAdvFromPeerEntry 1 }
Zorn & Comerica Expires December 16, 2011 [Page 19]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpAppAdvFromPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the applications
advertised as supported from each Diameter peer."
::= { dbpAppAdvFromPeerEntry 2 }
dbpAppAdvFromPeerType OBJECT-TYPE
SYNTAX ServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of services supported for each application,
accounting, authentication or both."
::= { dbpAppAdvFromPeerEntry 3 }
-- table of vendor-IDs supported by each peer
dbpPeerVendorTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPeerVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Vendor IDs
supported by the peer."
::= { dbpPeerCfgs 4 }
dbpPeerVendorEntry OBJECT-TYPE
SYNTAX DbpPeerVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a
Vendor ID supported by the peer."
INDEX {
dbpPeerIndex,
dbpPeerVendorIndex
}
::= { dbpPeerVendorTable 1 }
DbpPeerVendorEntry ::= SEQUENCE {
dbpPeerVendorIndex Unsigned32,
dbpPeerVendorId INTEGER,
dbpPeerVendorStorageType StorageType,
dbpPeerVendorRowStatus RowStatus
}
Zorn & Comerica Expires December 16, 2011 [Page 20]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPeerVendorIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the Vendor
ID supported by the peer. Upon reload,
dbpPeerVendorIndex values may be changed."
::= { dbpPeerVendorEntry 1 }
dbpPeerVendorId OBJECT-TYPE
SYNTAX INTEGER {
diameterVendorIetf (0),
diameterVendorCisco (9),
diameterVendor3gpp (10415),
diameterVendorVodafone (12645)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The active vendor ID used for peer connections.
diameterVendorIetf (0) -- IETF
diameterVendorCisco (9) -- Cisco Systems
diameterVendor3gpp (10415) -- 3GPP
diameterVendorVodafone (12645) --- Vodafone"
DEFVAL { diameterVendorIetf }
::= { dbpPeerVendorEntry 2 }
dbpPeerVendorStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpPeerVendorEntry 3 }
dbpPeerVendorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
Zorn & Comerica Expires December 16, 2011 [Page 21]
Internet-Draft Diameter Base Protocol MIB June 2011
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the dbpPeerVendorRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding dbpPeerVendorId has been
set. Also, a newly created row cannot be made active
until the corresponding 'dbpPeerIndex' has been set.
dbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
dbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with dbpPeerVendorRowStatus equal
to active(1) remain in the table until destroyed.
Entries in this table with dbpPeerVendorRowStatus equal
to values other than active(1) will be destroyed after
timeout (5 minutes)."
::= { dbpPeerVendorEntry 4 }
dbpPerPeerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPerPeerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing Diameter per-peer information."
::= { dbpPeerInfo 1 }
dbpPerPeerInfoEntry OBJECT-TYPE
SYNTAX DbpPerPeerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter peer."
INDEX { dbpPeerIndex }
::= { dbpPerPeerInfoTable 1 }
DbpPerPeeInfoEntry ::= SEQUENCE {
dbpPerPeerInfoState Integer32,
dbpPerPeeInfoStateDuration TimeTicks,
Zorn & Comerica Expires December 16, 2011 [Page 22]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPerPeerInfoLastDiscCause Integer32,
dbpPerPeerInfoWhoInitDisconnect Integer32,
dbpPerPeerStatsDWCurrentStatus Integer32,
dbpPerPeerStatsTimeoutConnAtmpts Counter32,
dbpPerPeerStatsASRsIn Counter32,
dbpPerPeerStatsASRsOut Counter32,
dbpPerPeerStatsASAsIn Counter32,
dbpPerPeerStatsASAsOut Counter32,
dbpPerPeerStatsACRsIn Counter32,
dbpPerPeerStatsACRsOut Counter32,
dbpPerPeerStatsACAsIn Counter32,
dbpPerPeerStatsACAsOut Counter32,
dbpPerPeerStatsCERsIn Counter32,
dbpPerPeerStatsCERsOut Counter32,
dbpPerPeerStatsCEAsIn Counter32,
dbpPerPeerStatsCEAsOut Counter32,
dbpPerPeerStatsDWRsIn Counter32,
dbpPerPeerStatsDWRsOut Counter32,
dbpPerPeerStatsDWAsIn Counter32,
dbpPerPeerStatsDWAsOut Counter32,
dbpPerPeerStatsDPRsIn Counter32,
dbpPerPeerStatsDPRsOut Counter32,
dbpPerPeerStatsDPAsIn Counter32,
dbpPerPeerStatsDPAsOut Counter32,
dbpPerPeerStatsRARsIn Counter32,
dbpPerPeerStatsRARsOut Counter32,
dbpPerPeerStatsRAAsIn Counter32,
dbpPerPeerStatsRAAsOut Counter32,
dbpPerPeerStatsSTRsIn Counter32,
dbpPerPeerStatsSTRsOut Counter32,
dbpPerPeerStatsSTAsIn Counter32,
dbpPerPeerStatsSTAsOut Counter32,
dbpPerPeerInfoDWReqTimer TimeTicks,
dbpPerPeerStatsRedirectEvents Counter32,
dbpPerPeerStatsAccDupRequests Counter32,
dbpPerPeerStatsMalformedReqsts Counter32,
dbpPerPeerStatsAccsNotRecorded Counter32,
dbpPerPeerStatsAccRetrans Counter32,
dbpPerPeerStatsTotalRetrans Counter32,
dbpPerPeerStatsAccPendReqstsOut Gauge32,
dbpPerPeerStatsAccReqstsDropped Counter32,
dbpPerPeerStatsHByHDropMessages Counter32,
dbpPerPeerStatsEToEDupMessages Counter32,
dbpPerPeerStatsUnknownTypes Counter32,
dbpPerPeerStatsProtocolErrors Counter32,
dbpPerPeerStatsTransientFailures Counter32,
dbpPerPeerStatsPermanentFailures Counter32,
dbpPerPeerStatsTransportDown Counter32 }
Zorn & Comerica Expires December 16, 2011 [Page 23]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPerPeerInfoState OBJECT-TYPE
SYNTAX INTEGER { closed(1),
waitConnAck(2),
waitICea(3),
elect(4),
waitReturns(5),
rOpen(6),
iOpen(7),
closing(8) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connection state in the Peer State Machine of
the peer with which this Diameter peer is
communicating.
closed - Connection closed with this peer.
waitConnAck - Waiting for an acknowledgment
from this peer.
waitICea - Waiting for a Capabilities-Exchange-Answer
from this peer.
elect - When the remote and local peers are both
trying to bring up a connection with
each other at the same time. An
election process begins which
determines which socket remains open.
waitReturns - Waiting for election returns.
r-open - Responder transport connection is
used for communication.
i-open - Initiator transport connection is
used for communication.
closing - Actively closing and doing cleanup."
::= { dbpPerPeerInfoEntry 1 }
dbpPerPeerInfoStateDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time (in hundredths of a second)
since the last state change."
::= { dbpPerPeerInfoEntry 2 }
dbpPerPeerInfoLastDiscCause OBJECT-TYPE
SYNTAX INTEGER { rebooting(1),
busy(2),
doNotWantToTalk(3),
election(4) }
Zorn & Comerica Expires December 16, 2011 [Page 24]
Internet-Draft Diameter Base Protocol MIB June 2011
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last cause for a peer's disconnection.
rebooting - A scheduled reboot is imminent.
busy - The peer's internal resources are
constrained, and it has determined
that the transport connection needs
to be shutdown.
doNotWantToTalk - The peer has determined that
it does not see a need for the
transport connection to exist,
since it does not expect any
messages to be exchanged in
the foreseeable future.
electionLost - The peer has determined that it
has lost the election process
and has therefore disconnected
the transport connection."
::= { dbpPerPeerInfoEntry 3 }
dbpPerPeerInfoWhoInitDisconnect OBJECT-TYPE
SYNTAX INTEGER { host(1),
peer(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Did the host or peer initiate the disconnect?
host - If this peer initiated the disconnect.
peer - If the peer with which this peer was
connected initiated the disconnect."
::= { dbpPerPeerInfoEntry 4 }
dbpPerPeerStatsDWCurrentStatus OBJECT-TYPE
SYNTAX INTEGER { okay(1),
suspect(2),
down(3),
reopen(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"okay - Indicates the connection is presumed working.
suspect - Indicates the connection is possibly
congested or down.
down - The peer is no longer reachable, causing
the transport connection to be shutdown.
Zorn & Comerica Expires December 16, 2011 [Page 25]
Internet-Draft Diameter Base Protocol MIB June 2011
reopen - Three watchdog messages are exchanged with
accepted round trip times, and the connection
to the peer is considered stabilized."
::= { dbpPerPeerInfoEntry 5 }
dbpPerPeerStatsTimeoutConnAtmpts OBJECT-TYPE
SYNTAX Counter32 UNITS "connection attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If there is no transport connection with a peer,
this is the number of times the local peer has attempted
to connect to that peer. This is reset on
connection."
::= { dbpPerPeerInfoEntry 6 }
dbpPerPeerStatsASRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
received from the peer."
::= { dbpPerPeerInfoEntry 7 }
dbpPerPeerStatsASRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request
messages sent to the peer."
::= { dbpPerPeerInfoEntry 8 }
dbpPerPeerStatsASAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer
messages received from the peer."
::= { dbpPerPeerInfoEntry 9 }
dbpPerPeerStatsASAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Zorn & Comerica Expires December 16, 2011 [Page 26]
Internet-Draft Diameter Base Protocol MIB June 2011
"Number of Abort-Session-Answer
messages sent to the peer."
::= { dbpPerPeerInfoEntry 10 }
dbpPerPeerStatsACRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
received from the peer."
::= { dbpPerPeerInfoEntry 11 }
dbpPerPeerStatsACRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
sent to the peer."
::= { dbpPerPeerInfoEntry 12 }
dbpPerPeerStatsACAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
received from the peer."
::= { dbpPerPeerInfoEntry 13 }
dbpPerPeerStatsACAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
sent to the peer."
::= { dbpPerPeerInfoEntry 14 }
dbpPerPeerStatsCERsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Request
messages received from the peer."
::= { dbpPerPeerInfoEntry 15 }
Zorn & Comerica Expires December 16, 2011 [Page 27]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPerPeerStatsCERsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Request
messages sent to the peer."
::= { dbpPerPeerInfoEntry 16 }
dbpPerPeerStatsCEAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Answer
messages received from the peer."
::= { dbpPerPeerInfoEntry 17 }
dbpPerPeerStatsCEAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Answer
messages sent to the peer."
::= { dbpPerPeerInfoEntry 18 }
dbpPerPeerStatsDWRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Request
messages received from the peer."
::= { dbpPerPeerInfoEntry 19 }
dbpPerPeerStatsDWRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Request
messages sent to the peer."
::= { dbpPerPeerInfoEntry 20 }
dbpPerPeerStatsDWAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
Zorn & Comerica Expires December 16, 2011 [Page 28]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Answer
messages received from the peer."
::= { dbpPerPeerInfoEntry 21 }
dbpPerPeerStatsDWAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Answer
messages sent to the peer."
::= { dbpPerPeerInfoEntry 22 }
dbpPerPeerStatsDPRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Request messages
received."
::= { dbpPerPeerInfoEntry 23 }
dbpPerPeerStatsDPRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Request messages
sent."
::= { dbpPerPeerInfoEntry 24 }
dbpPerPeerStatsDPAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Answer messages
received."
::= { dbpPerPeerInfoEntry 25 }
dbpPerPeerStatsDPAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Answer messages
Zorn & Comerica Expires December 16, 2011 [Page 29]
Internet-Draft Diameter Base Protocol MIB June 2011
sent."
::= { dbpPerPeerInfoEntry 26 }
dbpPerPeerStatsRARsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
received."
::= { dbpPerPeerInfoEntry 27 }
dbpPerPeerStatsRARsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
sent."
::= { dbpPerPeerInfoEntry 28 }
dbpPerPeerStatsRAAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
received."
::= { dbpPerPeerInfoEntry 29 }
dbpPerPeerStatsRAAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
sent."
::= { dbpPerPeerInfoEntry 30 }
dbpPerPeerStatsSTRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request
messages received from the peer."
::= { dbpPerPeerInfoEntry 31 }
Zorn & Comerica Expires December 16, 2011 [Page 30]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPerPeerStatsSTRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request
messages sent to the peer."
::= { dbpPerPeerInfoEntry 32 }
dbpPerPeerStatsSTAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer
messages received from the peer."
::= { dbpPerPeerInfoEntry 33 }
dbpPerPeerStatsSTAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer
messages sent to the peer."
::= { dbpPerPeerInfoEntry 34 }
dbpPerPeerInfoDWReqTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device-Watchdog Request Timer, which
is the interval between messages sent to
peers."
::= { dbpPerPeerInfoEntry 35 }
dbpPerPeerStatsRedirectEvents OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Redirect Event count, which is the number
of redirects sent from a peer."
::= { dbpPerPeerInfoEntry 36 }
dbpPerPeerStatsAccDupRequests OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
Zorn & Comerica Expires December 16, 2011 [Page 31]
Internet-Draft Diameter Base Protocol MIB June 2011
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate Diameter Accounting-Request
messages received."
::= { dbpPerPeerInfoEntry 37 }
dbpPerPeerStatsMalformedReqsts OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed Diameter
messages received."
::= { dbpPerPeerInfoEntry 38 }
dbpPerPeerStatsAccsNotRecorded OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request messages
which were received and responded to but not
recorded."
::= { dbpPerPeerInfoEntry 39 }
dbpPerPeerStatsAccRetrans OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request messages
retransmitted to this Diameter peer."
::= { dbpPerPeerInfoEntry 40 }
dbpPerPeerStatsTotalRetrans OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter messages retransmitted
to this Diameter peer, not to include Diameter
Accounting-Request messages retransmitted."
::= { dbpPerPeerInfoEntry 41 }
dbpPerPeerStatsAccPendReqstsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
Zorn & Comerica Expires December 16, 2011 [Page 32]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request messages
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is received by this server and decremented
due to the transmission of an Accounting-Response, a timeout
or a retransmission."
::= { dbpPerPeerInfoEntry 42 }
dbpPerPeerStatsAccReqstsDropped OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Accounting-Requests to this server
that have been dropped."
::= { dbpPerPeerInfoEntry 43 }
dbpPerPeerStatsHByHDropMessages OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An answer message that is received with an unknown
Hop-by-Hop Identifier. Does not include Accounting
Requests dropped."
::= { dbpPerPeerInfoEntry 44 }
dbpPerPeerStatsEToEDupMessages OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate answer messages that are to be locally
consumed. Does not include duplicate Accounting
Requests received."
::= { dbpPerPeerInfoEntry 45 }
dbpPerPeerStatsUnknownTypes OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter messages of unknown type
which were received."
::= { dbpPerPeerInfoEntry 46 }
Zorn & Comerica Expires December 16, 2011 [Page 33]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPerPeerStatsProtocolErrors OBJECT-TYPE
SYNTAX Counter32 UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of protocol errors returned to peer,
but not including redirects."
::= { dbpPerPeerInfoEntry 47 }
dbpPerPeerStatsTransientFailures OBJECT-TYPE
SYNTAX Counter32 UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transient Failure count."
::= { dbpPerPeerInfoEntry 48 }
dbpPerPeerStatsPermanentFailures OBJECT-TYPE
SYNTAX Counter32 UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of permanent failures returned to peer."
::= { dbpPerPeerInfoEntry 49 }
dbpPerPeerStatsTransportDown OBJECT-TYPE
SYNTAX Counter32 UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unexpected transport failures."
::= { dbpPerPeerInfoEntry 50 }
-- Realm-based Routing Table
dbpRealmMessageRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpRealmMessageRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
Realm-based Message Route information."
::= { dbpRealmStats 1 }
dbpRealmMessageRouteEntry OBJECT-TYPE
SYNTAX DbpRealmMessageRouteEntry
MAX-ACCESS not-accessible
Zorn & Comerica Expires December 16, 2011 [Page 34]
Internet-Draft Diameter Base Protocol MIB June 2011
STATUS current
DESCRIPTION
"A row entry representing a Diameter
Realm Based Message Route."
INDEX { dbpRealmMessageRouteIndex }
::= { dbpRealmMessageRouteTable 1 }
DbpRealmMessageRouteEntry ::= SEQUENCE {
dbpRealmMessageRouteIndex Unsigned32,
dbpRealmMessageRouteRealm SnmpAdminString,
dbpRealmMessageRouteApp Unsigned32,
dbpRealmMessageRouteType ServiceType,
dbpRealmMessageRouteAction Integer32,
dbpRealmMessageRouteACRsIn Counter32,
dbpRealmMessageRouteACRsOut Counter32,
dbpRealmMessageRouteACAsIn Counter32,
dbpRealmMessageRouteACAsOut Counter32,
dbpRealmMessageRouteRARsIn Counter32,
dbpRealmMessageRouteRARsOut Counter32,
dbpRealmMessageRouteRAAsIn Counter32,
dbpRealmMessageRouteRAAsOut Counter32,
dbpRealmMessageRouteSTRsIn Counter32,
dbpRealmMessageRouteSTRsOut Counter32,
dbpRealmMessageRouteSTAsIn Counter32,
dbpRealmMessageRouteSTAsOut Counter32,
dbpRealmMessageRouteASRsIn Counter32,
dbpRealmMessageRouteASRsOut Counter32,
dbpRealmMessageRouteASAsIn Counter32,
dbpRealmMessageRouteASAsOut Counter32,
dbpRealmMessageRouteAccRetrans Counter32,
dbpRealmMessageRouteAccDupReqsts Counter32,
dbpRealmMessageRoutePendReqstsOut Gauge32,
dbpRealmMessageRouteReqstsDrop Counter32 }
dbpRealmMessageRouteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each Realm."
::= { dbpRealmMessageRouteEntry 1 }
dbpRealmMessageRouteRealm OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Realm name"
Zorn & Comerica Expires December 16, 2011 [Page 35]
Internet-Draft Diameter Base Protocol MIB June 2011
::= { dbpRealmMessageRouteEntry 2 }
dbpRealmMessageRouteApp OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application id used to route messages
to this realm."
::= { dbpRealmMessageRouteEntry 3 }
dbpRealmMessageRouteType OBJECT-TYPE
SYNTAX ServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The types of service supported for each
realm application: accounting,
authentication or both."
::= { dbpRealmMessageRouteEntry 4 }
dbpRealmMessageRouteAction OBJECT-TYPE
SYNTAX INTEGER { local(1),
relay(2),
proxy(3),
redirect(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action is used to identify how a
message should be treated based on the realm,
application and type.
local - Diameter messages that resolve to a
route entry with the Local Action set to
Local can be satisfied locally, and do
not need to be routed to another peer.
relay - All Diameter messages that fall within
this category MUST be routed to a
next-hop peer, without modifying any
non-routing AVPs.
proxy - All Diameter messages that fall within this
category MUST be routed to a next-hop
peer.
redirect - Diameter messages that fall within this
category MUST have the identity of the home
Diameter peer(s) appended, and returned
to the sender of the message."
::= { dbpRealmMessageRouteEntry 5 }
Zorn & Comerica Expires December 16, 2011 [Page 36]
Internet-Draft Diameter Base Protocol MIB June 2011
-- Per-realm message statistics
dbpRealmMessageRouteACRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 6 }
dbpRealmMessageRouteACRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 7 }
dbpRealmMessageRouteACAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 8 }
dbpRealmMessageRouteACAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 9 }
dbpRealmMessageRouteRARsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 10 }
dbpRealmMessageRouteRARsOut OBJECT-TYPE
Zorn & Comerica Expires December 16, 2011 [Page 37]
Internet-Draft Diameter Base Protocol MIB June 2011
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 11 }
dbpRealmMessageRouteRAAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 12 }
dbpRealmMessageRouteRAAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 13 }
dbpRealmMessageRouteSTRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 14 }
dbpRealmMessageRouteSTRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 15 }
dbpRealmMessageRouteSTAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
Zorn & Comerica Expires December 16, 2011 [Page 38]
Internet-Draft Diameter Base Protocol MIB June 2011
DESCRIPTION
"Number of Session-Termination-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 16 }
dbpRealmMessageRouteSTAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 17 }
dbpRealmMessageRouteASRsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 18 }
dbpRealmMessageRouteASRsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 19 }
dbpRealmMessageRouteASAsIn OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 20 }
dbpRealmMessageRouteASAsOut OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer messages
sent to the realm."
Zorn & Comerica Expires December 16, 2011 [Page 39]
Internet-Draft Diameter Base Protocol MIB June 2011
::= { dbpRealmMessageRouteEntry 21 }
dbpRealmMessageRouteAccRetrans OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter accounting messages
retransmitted to this realm."
::= { dbpRealmMessageRouteEntry 22 }
dbpRealmMessageRouteAccDupReqsts OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate Diameter accounting
messages sent to this realm."
::= { dbpRealmMessageRouteEntry 23 }
dbpRealmMessageRoutePendReqstsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request messages
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this peer and decremented
due to receipt of an Accounting-Response, a timeout or
a retransmission."
::= { dbpRealmMessageRouteEntry 24 }
dbpRealmMessageRouteReqstsDrop OBJECT-TYPE
SYNTAX Counter32 UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requsts dropped by this realm."
::= { dbpRealmMessageRouteEntry 25 }
dbpRealmKnownPeersTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpRealmKnownPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
Realms and known peers.
Zorn & Comerica Expires December 16, 2011 [Page 40]
Internet-Draft Diameter Base Protocol MIB June 2011
This is an ordered list, where the ordering
signifies the order in which the peers are
tried."
::= { dbpRealmCfgs 1 }
dbpRealmKnownPeersEntry OBJECT-TYPE
SYNTAX DbpRealmKnownPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
Realm and known peers."
INDEX { dbpRealmMessageRouteIndex,
dbpRealmKnownPeersIndex }
::= { dbpRealmKnownPeersTable 1 }
DbpRealmKnownPeersEntry ::= SEQUENCE {
dbpRealmKnownPeersIndex Unsigned32,
dbpRealmKnownPeers Unsigned32,
dbpRealmKnownPeersChosen Integer32 }
dbpRealmKnownPeersIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A sequential identifier number."
::= { dbpRealmKnownPeersEntry 1 }
dbpRealmKnownPeers OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the peer this realm knows about.
Same as the dbpPeerIndex"
::= { dbpRealmKnownPeersEntry 2 }
dbpRealmKnownPeersChosen OBJECT-TYPE
SYNTAX INTEGER { other(1),
roundRobin(2),
loadBalance(3),
firstPreferred(4),
mostRecentFirst(5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How the realm chooses which peer to send
Zorn & Comerica Expires December 16, 2011 [Page 41]
Internet-Draft Diameter Base Protocol MIB June 2011
messages to.
roundRobin - The peer used for each transaction
is selected based on the order in
which peers are configured.
loadBalance - The peer used for each transaction
is based on the load metric (
implementation dependent) of all
peers defined for the realm, with
the least loaded peer selected
first.
firstPreferred - The first defined peer is always
used for transactions unless
failover occurs.
mostRecentFirst - The most recently used peer is
used first for each transaction."
::= { dbpRealmKnownPeersEntry 3 }
-- Conformance
diameterBaseProtocolMIBCompliances
OBJECT IDENTIFIER ::= { diameterBaseConform 1 }
diameterBaseProtocolMIBGroups
OBJECT IDENTIFIER ::= { diameterBaseConform 2 }
-- Compliance Statements
diameterBPMIBCompliances MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Diameter Base
Protocol entities."
MODULE -- this module
MANDATORY-GROUPS {
dbpLocalCfgGroup,
dbpPeerCfgGroup,
dbpPeerStatsGroup,
dbpNotificationsGroup,
dbpNotifCfgGroup }
GROUP dbpLocalCfgSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that
implements all the local config objects."
GROUP dbpLocalStatsSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that
Zorn & Comerica Expires December 16, 2011 [Page 42]
Internet-Draft Diameter Base Protocol MIB June 2011
implements all the local statistics objects."
GROUP dbpPeerCfgSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that
implements all the peer config objects."
GROUP dbpPeerStatsSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that
implements all the peer statistic objects."
GROUP dbpRealmCfgSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that
implementsall the realm config objects."
GROUP dbpRealmStatsSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that
implements all the realm statistic objects."
::= { diameterBaseProtocolMIBCompliances 1 }
-- Units of Conformance
dbpLocalCfgGroup OBJECT-GROUP
OBJECTS {
dbpLocalRealm,
dbpLocalOriginHost,
dbpLocalVendorId,
dbpLocalVendorStorageType,
dbpLocalVendorRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common
to the peer."
::= { diameterBaseProtocolMIBGroups 1 }
dbpPeerCfgGroup OBJECT-GROUP
OBJECTS {
dbpPeerId,
dbpPeerPortConnect,
dbpPeerPortListen,
dbpPeerProtocol,
dbpPeerSecurity,
dbpPeerFirmwareRevision,
Zorn & Comerica Expires December 16, 2011 [Page 43]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPeerStorageType,
dbpPeerRowStatus,
dbpPeerIpAddressType,
dbpPeerIpAddress,
dbpPeerVendorId,
dbpPeerVendorStorageType,
dbpPeerVendorRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration
of the Diameter peers."
::= { diameterBaseProtocolMIBGroups 2 }
dbpPeerStatsGroup OBJECT-GROUP
OBJECTS {
dbpPeerStatsState,
dbpPeerStatsStateDuration,
dbpPeerStatsLastDiscCause,
dbpPeerStatsWhoInitDisconnect,
dbpPeerStatsDWCurrentStatus,
dbpPeerStatsTimeoutConnAtmpts,
dbpPeerStatsASRsIn,
dbpPeerStatsASRsOut,
dbpPeerStatsASAsIn,
dbpPeerStatsASAsOut,
dbpPeerStatsACRsIn,
dbpPeerStatsACRsOut,
dbpPeerStatsACAsIn,
dbpPeerStatsACAsOut,
dbpPeerStatsCERsIn,
dbpPeerStatsCERsOut,
dbpPeerStatsCEAsIn,
dbpPeerStatsCEAsOut,
dbpPeerStatsDWRsIn,
dbpPeerStatsDWRsOut,
dbpPeerStatsDWAsIn,
dbpPeerStatsDWAsOut,
dbpPeerStatsDPRsIn,
dbpPeerStatsDPRsOut,
dbpPeerStatsDPAsIn,
dbpPeerStatsDPAsOut,
dbpPeerStatsRARsIn,
dbpPeerStatsRARsOut,
dbpPeerStatsRAAsIn,
dbpPeerStatsRAAsOut,
dbpPeerStatsSTRsIn,
dbpPeerStatsSTRsOut,
Zorn & Comerica Expires December 16, 2011 [Page 44]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPeerStatsSTAsIn,
dbpPeerStatsSTAsOut,
dbpPeerStatsDWReqTimer,
dbpPeerStatsRedirectEvents,
dbpPeerStatsAccDupRequests,
dbpPeerStatsMalformedReqsts,
dbpPeerStatsAccsNotRecorded,
dbpPeerStatsAccRetrans,
dbpPeerStatsTotalRetrans,
dbpPeerStatsAccPendReqstsOut,
dbpPeerStatsAccReqstsDropped,
dbpPeerStatsHByHDropMessages,
dbpPeerStatsEToEDupMessages,
dbpPeerStatsUnknownTypes,
dbpPeerStatsProtocolErrors,
dbpPeerStatsTransientFailures,
dbpPeerStatsPermanentFailures,
dbpPeerStatsTransportDown
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of the Diameter peers."
::= { diameterBaseProtocolMIBGroups 3 }
dbpNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
dbpProtocolErrorNotif,
dbpTransientFailureNotif,
dbpPermanentFailureNotif,
dbpPeerConnectionDownNotif,
dbpPeerConnectionUpNotif
}
STATUS current
DESCRIPTION
"The set of notifications which an agent is required
to implement."
::= { diameterBaseProtocolMIBGroups 4 }
dbpNotifCfgGroup OBJECT-GROUP
OBJECTS {
dbpProtocolErrorNotifEnabled,
dbpTransientFailureNotifEnabled,
dbpPermanentFailureNotifEnabled,
dbpPeerConnectionDownNotifEnabled,
dbpPeerConnectionUpNotifEnabled
}
STATUS current
Zorn & Comerica Expires December 16, 2011 [Page 45]
Internet-Draft Diameter Base Protocol MIB June 2011
DESCRIPTION
"A collection of objects providing configuration for
base protocol notifications."
::= { diameterBaseProtocolMIBGroups 5 }
dbpLocalCfgSkippedGroup OBJECT-GROUP
OBJECTS {
dbpLocalId,
dbpLocalTcpListenPort,
dbpLocalSctpListenPort,
dbpLocalStatsTotalPacketsIn,
dbpLocalStatsTotalPacketsOut,
dbpLocalStatsTotalUpTime,
dbpLocalResetTime,
dbpLocalConfigReset,
dbpLocalApplStorageType,
dbpLocalApplRowStatus,
dbpAppAdvToPeerServices,
dbpAppAdvToPeerStorageType,
dbpAppAdvToPeerRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common
to the peer."
::= { diameterBaseProtocolMIBGroups 6 }
dbpLocalStatsSkippedGroup OBJECT-GROUP
OBJECTS {
dbpLocalStatsTotalPacketsIn,
dbpLocalStatsTotalPacketsOut,
dbpLocalStatsTotalUpTime,
dbpLocalResetTime,
dbpLocalConfigReset
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics common
to the peer."
::= { diameterBaseProtocolMIBGroups 7 }
dbpPeerCfgSkippedGroup OBJECT-GROUP
OBJECTS { cdbpAppAdvFromPeerType }
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
Diameter peers."
::= { diameterBaseProtocolMIBGroups 8 }
Zorn & Comerica Expires December 16, 2011 [Page 46]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpPeerStatsSkippedGroup OBJECT-GROUP
OBJECTS {
dbpPeerStatsDWCurrentStatus,
dbpPeerStatsDWReqTimer,
dbpPeerStatsRedirectEvents,
dbpPeerStatsAccDupRequests,
dbpPeerStatsEToEDupMessages
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of Diameter peers."
::= { diameterBaseProtocolMIBGroups 9 }
dbpRealmCfgSkippedGroup OBJECT-GROUP
OBJECTS {
dbpRealmKnownPeers,
dbpRealmKnownPeersChosen
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
realm message routing."
::= { diameterBaseProtocolMIBGroups 10 }
dbpRealmStatsSkippedGroup OBJECT-GROUP
OBJECTS {
dbpRealmMessageRouteRealm,
dbpRealmMessageRouteApp,
dbpRealmMessageRouteType,
dbpRealmMessageRouteAction,
dbpRealmMessageRouteACRsIn,
dbpRealmMessageRouteACRsOut,
dbpRealmMessageRouteACAsIn,
dbpRealmMessageRouteACAsOut,
dbpRealmMessageRouteRARsIn,
dbpRealmMessageRouteRARsOut,
dbpRealmMessageRouteRAAsIn,
dbpRealmMessageRouteRAAsOut,
dbpRealmMessageRouteSTRsIn,
dbpRealmMessageRouteSTRsOut,
dbpRealmMessageRouteSTAsIn,
dbpRealmMessageRouteSTAsOut,
dbpRealmMessageRouteASRsIn,
dbpRealmMessageRouteASRsOut,
dbpRealmMessageRouteASAsIn,
dbpRealmMessageRouteASAsOut,
dbpRealmMessageRouteAccRetrans,
Zorn & Comerica Expires December 16, 2011 [Page 47]
Internet-Draft Diameter Base Protocol MIB June 2011
dbpRealmMessageRouteAccDupReqsts,
dbpRealmMessageRoutePendReqstsOut,
dbpRealmMessageRouteReqstsDrop
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of realm message routing."
::= { diameterBaseProtocolMIBGroups 11 }
END
5. IANA Considerations
The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value
----------------------- -----------------------
diameterBaseProtocolMIB { mib-2 XXX }
Editor's Note (to be removed prior to publication) The IANA is
requested to assign a value for "XXX" under the 'mib-2' subtree
and to record the assignment in the SMI Numbers registry. When
the assignment has been made, the RFC Editor is asked to replace
"XXX" (here and in the MIB module) with the assigned value and to
remove this note.
6. Security Considerations
There are managed objects defined in this MIB that have a MAX-ACCESS
clause of read-write and/or read-create. Such objects may be
considered sensitive or vulnerable in some network environments. The
support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations.
There are several of managed objects in this MIB that may contain
sensitive information. These are:
o diameterHostAddress
o diameterPeerServerAddress
o diameterPeerIpAddress
Zorn & Comerica Expires December 16, 2011 [Page 48]
Internet-Draft Diameter Base Protocol MIB June 2011
These can be used to determine the address of the Diameter host,
and/or peers with which the host is communicating. This information
could be useful in impersonating the host or peer.
It is important to control GET access to these objects and possibly
to even encrypt the values of these object when sending them over the
network via SNMP. Not all versions of SNMP provide features for such
a secure environment.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), there is no control as
to who on the secure network is allowed to access and GET (read) the
objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model [RFC3414] and the View-based Access
Control Model [RFC3415] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET (change/
create/delete) them.
7. Contributors
This document is based upon and derived from work done by Jay
Koehler, Mark Eklund, Hai Li and Subash Comerica.
8. Acknowledgements
Thanks to David Battle for his participation and suggestions in
designing the table structures; Dan Romascanu, Kevin Lingle, Sumanth
Mithra, Tolga Asveren, Tina Tsou, Mark Jones, John Loughney and
Biswaranjan Panda for reviewing the MIB and making invaluable
suggestions; and Greg Weber for his help in representing the MIB at
IETF meetings.
9. References
9.1. Normative References
[I-D.ietf-dime-rfc3588bis]
Fajardo, V., Arkko, J., Loughney, J., and G. Zorn,
Zorn & Comerica Expires December 16, 2011 [Page 49]
Internet-Draft Diameter Base Protocol MIB June 2011
"Diameter Base Protocol", draft-ietf-dime-rfc3588bis-26
(work in progress), January 2011.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
December 2002.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC4133] Bierman, A. and K. McCloghrie, "Entity MIB (Version 3)",
RFC 4133, August 2005.
9.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3415] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", STD 62, RFC 3415,
December 2002.
Zorn & Comerica Expires December 16, 2011 [Page 50]
Internet-Draft Diameter Base Protocol MIB June 2011
Authors' Addresses
Glen Zorn
Network Zen
227/358 Thanon Sanphawut
Bang Na, Bangkok 10260
Thailand
Phone: +66 (0) 87 040-4617
Email: gwz@net-zen.net
Subash T. Comerica
Juniper Networks
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
Phone: +1 (408) 936-0830
Email: scomerica@juniper.net
Zorn & Comerica Expires December 16, 2011 [Page 51]
