Internet DRAFT - draft-fu-softwire-dslite-mib

draft-fu-softwire-dslite-mib



Network Working Group                                            Y. Fu
Internet Draft                                                S. Jiang
Intended status: Standards Track          Huawei Technologies Co., Ltd
Expires: November 30, 2012                                     J. Dong
                                                                Y.Chen
                                                   Tsinghua University
                                                          May 28, 2012

               DS-Lite Management Information Base (MIB)
                    draft-fu-softwire-dslite-mib-05


Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF). Note that other groups may also distribute working
   documents as Internet-Drafts. The list of current Internet-Drafts is
   at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 30, 2012.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors. All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document. Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document. Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.










Fu, et al.            Expires November 30, 2012               [Page 1]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


Abstract

This memo defines a portion of the Management Information Base (MIB) for
using with network management protocols in the Internet community. In
particular, it defines managed objects for DS-Lite.

Table of Contents

   1. Introduction ................................................. 3
   2. The Internet-Standard Management Framework ................... 3
   3. Terminology .................................................. 3
   4. Difference from the IP tunnel MIB and NAT MIB ................ 3
   5. Relationship to the IF-MIB ................................... 5
   6. Structure of the MIB Module .................................. 5
      6.1. The dsliteTunnel Subtree ................................ 5
      6.2. The dsliteNAT Subtree ................................... 5
      6.3. The dsliteInfo Subtree .................................. 6
      6.4. The dsliteTrap Subtree .................................. 6
      6.5. The dsliteConformance Subtree ........................... 6
   7. MIB modules required for IMPORTS ............................. 6
   8. Definitions .................................................. 6
   9. Extending this MIB for Gateway Initiated Dual-Stack Lite..... 27
   10. IANA Considerations ........................................ 27
   11. Security Considerations .................................... 28
   12. References ................................................. 28
      12.1. Normative References .................................. 28
      12.2. Informative References ................................ 29
   13. Change Log [RFC Editor please remove] ...................... 29
   Author's Addresses ............................................. 30



















Fu, et al.            Expires November 30, 2012               [Page 2]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012



1. Introduction

   Dual-Stack Lite [RFC 6333] is a solution to offer both IPv4 and IPv6
   connectivity to customers crossing IPv6 only infrastructure. One of
   its key components is an IPv4-over-IPv6
   tunnel, which is used to provide IPv4 connection across service
   provider IPv6 network. Another key component is a carrier-grade IPv4-
   IPv4 NAT to share service provider IPv4 addresses among customers.

   This document defines a portion of the Management Information Base
   (MIB) for use with network management protocols in the Internet
   community. This MIB module may be used for configuration and
   monitoring the devices in the Dual-Stack Lite scenario.
   This MIB also can be extended to the application for Gateway
   Initiated Dual-Stack Lite.

2. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the MIB. MIB objects are generally accessed through the Simple
   Network Management Protocol (SNMP).

   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in
   [RFC2578], [RFC2579] and [RFC2580].

3. Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

4. Difference from the IP tunnel MIB and NAT MIB

   The key technologies for DS-Lite are IP in IP (IPv4-in-IPv6) tunnel
   and NAT (IPv4 to IPv4 translation).

   Notes: According to the section 5.2 of RFC6333, DS-Lite only defines
   IPv4 in IPv6 tunnels at this moment, but other types of encapsulation
   could be defined in the future. So this DS-Lite MIB only support IP



Fu, et al.            Expires November 30, 2012               [Page 3]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


   in IP encapsulation, if the RFC6333 defined other tunnel types in the
   future, this DS-Lite MIB will be updated then.

   The NAT-MIB [RFC4008] is designed to carry translation from any
   address family to any address family, therefore supports IPv4 to IPv4
   translation.

   The tunnel MIB [RFC4087] is designed for managing tunnels of any type
   over IPv4 and IPv6 networks, therefore supports IP in IP tunnels.

   However, NAT MIB and tunnel MIB together are not sufficient to
   support DS-Lite. This document describes the specific MIB
   requirements for DS-Lite, as below.

         In DS-Lite scenario, the tunnel type is IP in IP, more
         precisely, is IPv4 in IPv6.  Therefore, it is unnecessary to
         describe tunnel type in DS-Lite MIB.

         In DS-Lite scenario, the translation type is IPv4 private
         address to IPv4 public address. Therefore, it is unnecessary to
         describe the type of address in the corresponding
         tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress objects
         in DS-Lite MIB.

         In DS-Lite scenario, the AFTR is not only the tunnel end
         concentrator, but also a 4-4 translator. Within the AFTR,
         tunnel information and translation information MUST be mapped
         each other. Two independent MIB is not able to reflect this
         mapping relationship. Therefore, a combined MIB is necessary.

         If the Gateway Initiated Dual-Stack Lite scenario[I-D.ietf-
         softwire-gateway-init-ds-lite] is required, the MIB defined in
         this document could be easily extended for GI-DS-Lite. CID
         (Context Identifier) can be extended to the tunnel MIB to
         identifier the access devices which have the same IPv4 address.
         And both CID and SWID (Softwire Identifier) can be extended to
         the NAT MIB for performing the NAT binding look up.

   The implementation of the IP Tunnel MIB is required for DS-Lite. The
   tunnelIfEncapsMethod in the tunnelIfEntry should be set to
   dsLite("xx"), and corresponding entry in the DS-Lite module will
   exist for every tunnelIfEntry with this tunnelIfEncapsMethod. The
   tunnelIfRemoteInetAddress must be set to ::.






Fu, et al.            Expires November 30, 2012               [Page 4]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


5. Relationship to the IF-MIB

   The Interfaces MIB [RFC2863] defines generic managed objects for
   managing interfaces. Each logical interface (physical or virtual)has
   an ifEntry. Tunnels are handled by creating a logical interface
   (ifEntry) for each tunnel. DS-Lite tunnel also acts as a virtual
   interface, which has corresponding entries in IP Tunnel MIB and
   Interface MIB. Those corresponding entries are indexed by ifIndex.

   The ifOperStatus in ifTable would be used to represent whether the
   DS-Lite tunnel function has been originated. The ifInUcastPkts
   defined in ifTabel will represent the number of IPv6 packets which
   have been encapsulated with IPv4 packets in it. The ifOutUcastPkts
   defined in ifTabel contains the number of IPv6 packets which can be
   decapsulated to IPv4 in the virtual interface. Also, the IF-MIB
   defines ifMtu for the MTU of this tunnel interface, so DS-Lite MIB
   does not need to define the MTU for tunnel.

6. Structure of the MIB Module

   The DS-Lite MIB provides a way to configure and manage the devices
   (AFTRs)in DS-Lite scenario through SNMP.

   DS-Lite MIB is configurable on a per-interface basis. It depends on
   several parts of the IF-MIB [RFC2863], tunnel MIB [RFC4087], and NAT
   MIB [RFC4008].

     6.1. The dsliteTunnel Subtree

   The dsliteTunnel subtree describes managed objects used for managing
   tunnels in the DS-Lite scenario. Because some objects defined in
   Tunnel MIB are not access, a few new objects are defined in DS-Lite
   MIB.

     6.2. The dsliteNAT Subtree

   The dsliteNAT Subtree describes managed objects used for
   configuration as well as monitoring of AFTR which is capable of NAT
   function. Because the NAT MIB supports the NAT management function in
   DS-Lite, we may reuse it in DS-Lite MIB. The dsliteNAT Subtree also
   provides the information of mapping relationship between the tunnel
   MIB and NAT MIB by extending B4 address to the bind table in NAT
   MIB.






Fu, et al.            Expires November 30, 2012               [Page 5]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


     6.3. The dsliteInfo Subtree

   The dsliteInfo Subtree provides the statistical information for DS-
   lite.

     6.4. The dsliteTrap Subtree

   The dsliteTrap Subtree provides trap information in DS-lite instance.

     6.5. The dsliteConformance Subtree

   The Subtree provides conformance information of MIB objects.

7. MIB modules required for IMPORTS

   This MIB module IMPORTs objects from [RFC4008], [RFC2580],
   [RFC2578], [RFC2863], [RFC4001], [RFC3411].

8. Definitions

      DSLite-MIB DEFFINITIONS  ::=  BEGIN

      IMPORTS
         MODULE-IDENTITY, OBJECT-TYPE, mib-2, transmission,
         Gauge32, Integer32, Counter64
            FROM SNMPv2-SMI

         RowStatus, StorageType, DisplayString
            FROM SNMPv2-TC

         ifIndex, InterfaceIndexOrZero
            FROM IF-MIB

         IANAtunnelType
            FROM IANAifType-MIB

         InetAddress, InetAddressIPv6, InetPortNumber
            FROM INET-ADDRESS-MIB

         NatAddrMapId, natAddrMapName, natAddrMapEntryType,
         natAddrMapLocalAddrFrom, natAddrMapLocalAddrTo,
         natAddrMapLocalPortFrom, natAddrMapLocalPortTo,
         natAddrMapGlobalAddrFrom, natAddrMapGlobalAddrTo,
         natAddrMapGlobalPortFrom, natAddrMapGlobalPortTo
         natAddrPortBindGlobalAddr, natAddrPortBindGlobalPort,
         NatBindId, natAddrPortBindSessions,
         natAddrPortBindMaxIdleTime, natAddrPortBindCurrentIdleTime,


Fu, et al.            Expires November 30, 2012               [Page 6]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         natAddrPortBindInTranslates, natAddrPortBindOutTranslates
            FROM natMIB

      dsliteMIB MODULE-IDENTITY
      LAST-UPDATED "201205280000Z" -- May 28, 2012
      ORGANIZATION "IETF Softwire Working Group"
      CONTACT-INFO
         "Yu Fu
          Huawei Technologies Co., Ltd
          Huawei Building, 156 Beiqing Rd., Hai-Dian District
          Beijing, P.R. China 100095
          EMail: eleven.fuyu@huawei.com

          Sheng Jiang
          Huawei Technologies Co., Ltd
          Huawei Building, 156 Beiqing Rd., Hai-Dian District
          Beijing, P.R. China 100095
          EMail: jiangsheng@huawei.com

          Jiang Dong
          Tsinghua University
          Department of Computer Science, Tsinghua University
          Beijing  100084
          P.R. China
          Email:  dongjiang @csnet1.cs.tsinghua.edu.cn

          Yuchi Chen
          Tsinghua University
          Department of Computer Science, Tsinghua University
          Beijing  100084
          P.R. China
          Email:  flashfoxmx@gmail.com "

      DESCRIPTION
         "The MIB module is defined for management of object in the
         DS-Lite scenario. "
         ::=  {  transmission xxx  }  --xxx to be replaced with correct
         value

       dsliteTunnel   OBJECT IDENTIFIER
         :: =  { dsliteMIB 1 }

       dsliteNAT   OBJECT IDENTIFIER
         :: =  { dsliteMIB 2 }

       dsliteInfo   OBJECT IDENTIFIER
         :: =  { dsliteMIB 3 }


Fu, et al.            Expires November 30, 2012               [Page 7]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


       dsliteTraps  OBJECT IDENTIFIER
         ::=  { dsliteMIB 4 }

       --Conformance
       dsliteConformance   OBJECT IDENTIFIER
         :: =  { dsliteMIB 5 }

          --dsliteTunnel
          --dsliteTunnelTable

      dsliteTunnelTable OBJECT-TYPE
         SYNTAX     SEQUENCE OF dsliteTunnelEntry
         MAX-ACCESS  not-accessible
         STATUS     current
         DESCRIPTION
            "The (conceptual) table containing information on configured
             tunnels. This table can be used to map CPE address to the
             associated AFTR address. It can also be used for row
             creation."
         :: =  { dsliteTunnel 1 }

      dsliteTunnelEntry OBJECT-TYPE
         SYNTAX     dsliteTunnelEntry
         MAX-ACCESS  not-accessible
         STATUS     current
         DESCRIPTION
            "Each entry in this table contains the information on a
             particular configured tunnel."
             INDEX   { dsliteTunnelStartAddress,
                       dsliteTunnelEndAddress,
                       ifIndex }
         :: =  { dsliteTunnelTable 1 }

      dsliteTunnelEntry  :: =
         SEQUENCE {
          dsliteTunnelStartAddress        InetAddressIPv6,
          dsliteTunnelStartAddPreLen      Integer32,
          dsliteTunnelEndAddress          InetAddressIPv6,
          dsliteTunnelStatus              RowStatus,
          dsliteTunnelStorageType         StorageType
      }

      dsliteTunnelStartAddress OBJECT-TYPE
          SYNTAX     InetAddressIPv6
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION


Fu, et al.            Expires November 30, 2012               [Page 8]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


             "The address of the start point of the tunnel."
          ::= { dsliteTunnelEntry 1 }

      dsliteTunnelStartAddPreLen OBJECT-TYPE
          SYNTAX Integer32 (0..128)
          MAX-ACCESS read-create
          STATUS current
          DESCRIPTION
             "IPv6 prefix length of the IP address of the
              start point of the tunnel."
          ::= { dsliteTunnelEntry 2 }

      dsliteTunnelEndAddress OBJECT-TYPE
          SYNTAX     InetAddressIPv6
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION
             "The address of the endpoint of the tunnel."
          ::= { dsliteTunnelEntry 3 }

      dsliteTunnelStatus OBJECT-TYPE
          SYNTAX     RowStatus
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION
             "The status of this row, by which new entries may be
              created, or old entries deleted from this table.
          ::= { dsliteTunnelEntry 4 }

      dsliteTunnelStorageType OBJECT-TYPE
          SYNTAX     StorageType
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION
             "The storage type of this row. If the row is
              permanent(4), no objects in the row need be
              writable."
          ::= { dsliteTunnelEntry 5 }

          --dsliteNAT
          --dsliteNATMapTable(define address pool)
          --dsliteNATBindTable


      dsliteNATMapTable OBJECT-TYPE
         SYNTAX     SEQUENCE OF dsliteNATMapEntry
         MAX-ACCESS not-accessible


Fu, et al.            Expires November 30, 2012               [Page 9]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         STATUS     current
         DESCRIPTION
            "This table contains information about address map
            parameters."
         :: =  { dsliteNAT 1 }

      dsliteNATMapEntry OBJECT-TYPE
         SYNTAX     dsliteNATMapEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
            " This entry represents an address map to be used for
              NAT and contributes to the address mapping tables of
              AFTR."
         INDEX   { ifIndex,
                   dsliteNATMapIndex }
         :: =  {  dsliteNATMapTable 1 }

      dsliteNATMapEntry  :: =
         SEQUENCE {
       dsliteNATMapIndex               NatAddrMapId,
       dsliteNATMapAddrName            natAddrMapName,
       dsliteNATMapEntryType           natAddrMapEntryType,
       dsliteNATMapLocalAddrFrom       natAddrMapLocalAddrFrom,
       dsliteNATMapLocalAddrTo         natAddrMapLocalAddrTo,
       dsliteNATMapLocalPortFrom       natAddrMapLocalPortFrom,
       dsliteNATMapLocalPortTo         natAddrMapLocalPortTo,
       dsliteNATMapGlobalAddrFrom      natAddrMapGlobalAddrFrom,
       dsliteNATMapGlobalAddrTo        natAddrMapGlobalAddrTo,
       dsliteNATMapGlobalPortFrom      natAddrMapGlobalPortFrom,
       dsliteNATMapGlobalPortTo        natAddrMapGlobalPortTo,
       dsliteNATMapAddrUsed            natAddrMapAddrUsed,
       dsliteNATMapStorageType         StorageType,
       dsliteNATMapRowStatus           RowStatus
      }

      dsliteNATMapIndex OBJECT-TYPE
         SYNTAX      NatAddrMapId
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
            "Along with ifIndex, this object uniquely
             identifies an entry in the dsliteNATMapTable.
             Address map entries are applied in the order
             specified by dsliteNATMapIndex."
         ::= { dsliteNATMapEntry 1 }



Fu, et al.            Expires November 30, 2012              [Page 10]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


      dsliteNATMapAddrName OBJECT-TYPE
         SYNTAX      natAddrMapName
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "Name identifying all map entries in the table associated
             with the same interface.  All map entries with the same
             ifIndex MUST have the same map name."
       ::= { dsliteNATMapEntry 2 }

      dsliteNATMapEntryType OBJECT-TYPE
         SYNTAX      natAddrMapEntryType
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "This parameter can be used to set up static
             or dynamic address maps."
       ::= { dsliteNATMapEntry 3 }

      dsliteNATMapLocalAddrFrom OBJECT-TYPE
         SYNTAX      natAddrMapLocalAddrFrom
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "This object specifies the first IP address of the range
                of IP addresses mapped by this translation entry.
                The value of this object must be less than or
                equal to the value of the dsliteNATMapLocalAddrTo
                object."
       ::= { dsliteNATMapEntry 4 }

      dsliteNATMapLocalAddrTo OBJECT-TYPE
         SYNTAX      natAddrMapLocalAddrTo
         MAX-ACCESS  read-create
         STATUS      current
       DESCRIPTION
          "This object specifies the last IP address of the range of
           IP addresses mapped by this translation entry. If only
           a single address is being mapped, the value of this
           object is equal to the value of natAddrMapLocalAddrFrom.
           The value of this object must be greater than or equal to
           the value of the natAddrMapLocalAddrFrom object."
       ::= { dsliteNATMapEntry 5 }

      dsliteNATMapLocalPortFrom OBJECT-TYPE
         SYNTAX      natAddrMapLocalPortFrom
         MAX-ACCESS  read-create


Fu, et al.            Expires November 30, 2012              [Page 11]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         STATUS      current
         DESCRIPTION
            "The value of this object must be less than or equal
             to the value of the dsliteNATMapLocalPortTo object.
             If the translation specifies a single port, then the
             value of this object is equal to the value of
             dsliteNATMapLocalPortTo."
         DEFVAL { 0 }
         ::= { dsliteNATMapEntry 6 }

      dsliteNATMapLocalPortTo OBJECT-TYPE
         SYNTAX      natAddrMapLocalPortTo
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "The value of this object must be greater than or equal
             to the value of the dsliteNATMapLocalPortFrom object.
             If the translation specifies a single port, then
             the value of this object is equal to the value of
             dsliteNATMapLocalPortFrom."
         DEFVAL { 0 }
         ::= { dsliteNATMapEntry 7 }

      dsliteNATMapGlobalAddrFrom OBJECT-TYPE
         SYNTAX    natAddrMapGlobalAddrFrom
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
               "This object specifies the first IP address of
                the range of IP addresses being mapped to.
                The value of this object must be less than
                or equal to the value of the
                dsliteNATMapGlobalAddrTo object.
       ::= { dsliteNATMapEntry 8 }

      dsliteNATMapGlobalAddrTo OBJECT-TYPE
         SYNTAX      natAddrMapGlobalAddrTo
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "This object specifies the last IP address of the range
             of IP addresses being mapped to. If only a single
             address is being mapped to, the value of this object
             is equal to the value of dsliteNATMapGlobalAddrFrom.
             The value of this object must be greater than or equal
             to the value of the dsliteNATMapGlobalAddrFrom object.
       ::= { dsliteNATMapEntry 9 }


Fu, et al.            Expires November 30, 2012              [Page 12]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


      dsliteNATMapGlobalPortFrom OBJECT-TYPE
         SYNTAX      natAddrMapGlobalPortFrom
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "The value of this object must be less than or equal
             to the value of the dsliteNATMapGlobalPortTo object.
             If the translation specifies a single port, then the
             value of this object is equal to the value
             dsliteNATMapGlobalPortTo."
       DEFVAL { 0 }
       ::= { dsliteNATMapEntry 10 }

      dsliteNATMapGlobalPortTo OBJECT-TYPE
         SYNTAX      natAddrMapGlobalPortTo
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "The value of this object must be greater than or
             equal to the value of the dsliteNATMapGlobalPortFrom
             object. If the translation specifies a single port,
             then the value of this object is equal to the
             value of dsliteNATMapGlobalPortFrom."
         DEFVAL { 0 }
         ::= { dsliteNATMapEntry 11 }

      dsliteNATMapAddrUsed OBJECT-TYPE
         SYNTAX     natAddrMapAddrUsed
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "The number of addresses pertaining to this address
             map that are currently being used from the NAT pool."
       ::= { dsliteNATMapEntry 12 }

      dsliteNATMapStorageType OBJECT-TYPE
         SYNTAX      StorageType
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "The storage type for this conceptual row.
             Conceptual rows having the value 'permanent'
             need not allow write-access to any columnar
             objects in the row."
         REFERENCE
            "Textual Conventions for SMIv2, Section 2."



Fu, et al.            Expires November 30, 2012              [Page 13]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         DEFVAL { nonVolatile }
         ::= { dsliteNATMapEntry 13 }

      dsliteNATMapRowStatus OBJECT-TYPE
         SYNTAX      RowStatus
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "The status of this conceptual row."
         REFERENCE
            "Textual Conventions for SMIv2, Section 2."
         ::= { dsliteNATMapEntry 14 }

      dsliteNATBindTable OBJECT-TYPE
         SYNTAX     SEQUENCE OF dsliteNATBindEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
            "This table contains information about currently
             active NAT binds in AFTR. This table extends the
             natAddrPortBindTable designed in NAT MIB (RFC
             4008) by IPv6 address of B4."
         :: =  { dsliteNAT 2 }

      dsliteNATBindEntry OBJECT-TYPE
         SYNTAX     dsliteNATBindEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
            "Each entry in this table holds the relationship between
             tunnel information and nat bind information. These entries
             are lost upon agent restart."
         INDEX   { ifIndex,
                   dsliteNATBindLocalAddr,
                   dsliteNATBindLocalPort,
                   dsliteB4Addr }
         :: =  {  dsliteNATBindTable 1   }

      dsliteNATBindEntry  :: =
         SEQUENCE {
       dsliteNATBindLocalAddr           InetAddress,
       dsliteNATBindLocalPort           InetPortNumber,
       dsliteNATBindGlobalAddr          natAddrPortBindGlobalAddr,
       dsliteNATBindGlobalPort          natAddrPortBindGlobalPort,
       dsliteNATBindId                  NatBindId,
       dsliteB4Addr                     dsliteTunnelStartAddress,
       dsliteB4PreLen                   dsliteTunnelStartAddPreLen,


Fu, et al.            Expires November 30, 2012              [Page 14]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


       dsliteNATBindMapIndex            NatAddrMapId,
       dsliteNATBindSessions            natAddrPortBindSessions,
       dsliteNATBindMaxIdleTime         natAddrPortBindMaxIdleTime,
       dsliteNATBindCurrentIdleTime     natAddrPortBindCurrentIdleTime,
       dsliteNATBindInTranslates        natAddrPortBindInTranslates,
       dsliteNATBindOutTranslates       natAddrPortBindOutTranslates
      }

      dsliteNATBindLocalAddr OBJECT-TYPE
         SYNTAX     InetAddress
         MAX-ACCESS read-create
         STATUS     current
         DESCRIPTION
            "This object represents the private IP address of host."
         ::= { dsliteNATBindEntry 1 }

      dsliteNATBindLocalPort OBJECT-TYPE
         SYNTAX     InetPortNumber
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION
             "This object represents the private-realm Port
              number of host."
          ::= { dsliteNATBindEntry 2 }

      dsliteNATBindGlobalAddr OBJECT-TYPE
         SYNTAX     natAddrPortBindGlobalAddr
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "This object represents the public-realm IP
             address of host."
         ::= { dsliteNATBindEntry 3 }

      dsliteNATBindGlobalPort OBJECT-TYPE
         SYNTAX     natAddrPortBindGlobalPort
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "This object represents the public-realm Port number
             of host."
         ::= { dsliteNATBindEntry 4 }

      dsliteNATBindId OBJECT-TYPE
         SYNTAX     NatBindId
         MAX-ACCESS read-only
         STATUS     current


Fu, et al.            Expires November 30, 2012              [Page 15]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         DESCRIPTION
            "This object represents a bind id that is
             dynamically assigned to each bind by AFTR.
             Each bind is represented by a unique bind
             id across the dsliteNATBindTable."
       ::= { dsliteNATBindEntry 5 }

      dsliteB4Addr OBJECT-TYPE
         SYNTAX     dsliteTunnelStartAddress
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "This object represents the relationship between
             tunnel start point to the Bind entry, which extends
             the source IPv6 address of packet to the Bind table."
         ::= { dsliteNATBindEntry 6 }

      dsliteB4PreLen OBJECT-TYPE
         SYNTAX     dsliteTunnelStartAddPreLen
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "This object indicates the IPv6 prefix length of the
            start point of tunnel, which is also need to extend to
            the Bind table."
        ::= { dsliteNATBindEntry 7 }

      dsliteNATBindMapIndex OBJECT-TYPE
         SYNTAX     NatAddrMapId
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "This object is a pointer to the dsliteNATMapTable
             entry used in creating this BIND."
         ::= { dsliteNATBindEntry 8 }

      dsliteNATBindSessions OBJECT-TYPE
         SYNTAX     natAddrPortBindSessions
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            " This object represents the number of sessions currently
              using this BIND."
         ::= { dsliteNATBindEntry 9 }

      dsliteNATBindMaxIdleTime OBJECT-TYPE
         SYNTAX     natAddrPortBindMaxIdleTime


Fu, et al.            Expires November 30, 2012              [Page 16]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         MAX-ACCESS read-only
         STATUS     current
       DESCRIPTION
          "This object indicates the maximum time for
           which this bind can be idle without any sessions
           attached to it."
       ::= { dsliteNATBindEntry 10 }

      dsliteNATBindCurrentIdleTime OBJECT-TYPE
         SYNTAX     natAddrPortBindCurrentIdleTime
         MAX-ACCESS read-only
         STATUS     current
       DESCRIPTION
          "At any given instance, this object indicates the
           time that this bind has been idle without any sessions
           attached to it."
       ::= { dsliteNATBindEntry 11 }

      dsliteNATBindInTranslates OBJECT-TYPE
         SYNTAX     natAddrPortBindInTranslates
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "The number of inbound packets that were
             translated as per this bind entry."
         ::= { dsliteNATBindEntry 12 }

      dsliteNATBindOutTranslates OBJECT-TYPE
         SYNTAX     natAddrPortBindOutTranslates
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
            "The number of outbound packets that were
             translated as per this bind entry."
       ::= { dsliteNATBindEntry 13 }

       --dsliteInfo

      dsliteSessionLimitTable OBJECT-TYPE
         SYNTAX     SEQUENCE OF dsliteSessionLimitEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
            "The (conceptual) table containing information about session
             limit. It can also be used for row creation."
         :: =  { dsliteInfo 1 }



Fu, et al.            Expires November 30, 2012              [Page 17]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


      dsliteSessionLimitEntry OBJECT-TYPE
         SYNTAX      dsliteSessionLimitEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
            "Each entry in this table contains the information to be
             used for configuring session limits for DS-lite."
             INDEX   { dsliteInstanceName,
                       dsliteSessionLimitaType }
         :: =  { dsliteSessionLimitTable 1 }

      dsliteSessionLimitEntry  :: =
         SEQUENCE {
       dsliteSessionLimitInstanceName         DisplayString,
       dsliteSessionLimitType                 INTEGER,
       dsliteSessionLimitNumber               Integer32,
       dsliteSessionLimitStorageType          StorageType,
       dsliteSessionLimitRowStatus            RowStatus
      }

      dsliteSessionLimitInstanceName OBJECT-TYPE
         SYNTAX      DisplayString (SIZE (1..31))
         MAX-ACCESS  read-only
         STATUS current
         DESCRIPTION
            " This object represents the instance name
              that is limited."
         ::= { dsliteSessionLimitEntry 1 }

      dsliteSessionLimitType OBJECT-TYPE
         SYNTAX  INTEGER
           {
               tcp(0),
               udp(1),
               icmp(2),
               total(3)
            }
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
            "This object represents the session limit type :
             tcp or udp or totally."
         ::= { dsliteSessionLimitEntry 2 }

      dsliteSessionLimitNumber OBJECT-TYPE
         SYNTAX Integer32 (1..65535)
         MAX-ACCESS read-create


Fu, et al.            Expires November 30, 2012              [Page 18]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         STATUS current
         DESCRIPTION
            " This table represents the limit number of the session."
         ::= { dsliteSessionLimitEntry 3 }

      dsliteSessionLimitStorageType OBJECT-TYPE
         SYNTAX StorageType
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            "The storage type for this conceptual row. Conceptual
             rows having the value 'permanent' need not allow
             write-access to any columnar objects in the row."
         ::= { dsliteSessionLimitEntry 4 }

      dsliteSessionLimitRowStatus OBJECT-TYPE
         SYNTAX RowStatus
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            " The status of this conceptual row."
         REFERENCE
            "Textual Conventions for SMIv2, Section 2."
         DEFVAL { nonVolatile }
         ::= { dsliteSessionLimitEntry 5 }

      dslitePortLimitTable OBJECT-TYPE
         SYNTAX SEQUENCE OF dslitePortLimitEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
            "This table is used to configure port limits for a
             DS-Lite instance."
         ::= { dsliteInfo 2 }

      dslitePortLimitEntry OBJECT-TYPE
         SYNTAX dslitePortLimitEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
            "Each entry in this table contains the information to be
             used for configuring port limits for DS-lite."
             INDEX { dslitePortLimitInstanceName,
                     dslitePortLimitType }
         ::= { dslitePortLimitTable 1 }




Fu, et al.            Expires November 30, 2012              [Page 19]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


      dslitePortLimitEntry ::=
         SEQUENCE {
       dslitePortLimitInstanceName            DisplayString,
       dslitePortLimitType                    INTEGER,
       dslitePortLimitNumber                  Integer32,
       dslitePortLimitStorageType             StorageType,
       dslitePortLimitRowStatus               RowStatus
      }

      dslitePortLimitInstanceName OBJECT-TYPE
         SYNTAX DisplayString (SIZE (1..31))
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
            " This object represents the instance name
              that is limited."
         ::= { dslitePortLimitEntry 1 }

      dslitePortLimitType OBJECT-TYPE
         SYNTAX  INTEGER
           {
               tcp(0),
               udp(1),
               icmp(2),
               total(3)
           }
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
            "This object represents the port limit
             type: tcp or udp or totally."
         ::= { dslitePortLimitEntry 2 }

      dslitePortLimitNumber OBJECT-TYPE
         SYNTAX Integer32 (1..300000)
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            "This object represents the limit number of the
             port usage."
         ::= { dslitePortLimitEntry 3 }

      dslitePortLimitStorageType OBJECT-TYPE
         SYNTAX StorageType
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION


Fu, et al.            Expires November 30, 2012              [Page 20]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


            "The storage type for this conceptual row. Conceptual
             rows having the value 'permanent' need not allow
             write-access to any columnar objects in the row."
         ::= { dslitePortLimitEntry 4 }

      dslitePortLimitRowStatus OBJECT-TYPE
         SYNTAX  RowStatus
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            "Create or delete table row."
         ::= { dslitePortLimitEntry 5 }

      dsliteAFTRAlarmScalar OBJECT IDENTIFIER ::= { dsliteInfo 3 }

      dsliteAFTRAlarmB4Addr OBJECT-TYPE
         SYNTAX  dsliteTunnelStartAddress
         MAX-ACCESS accessible-for-notify
         STATUS current
         DESCRIPTION
            "This object indicate the IP address of
             B4 that send alarm "
         ::= { dsliteAFTRAlarmScalar 1 }

      dsliteAFTRAlarmProtocolType OBJECT-TYPE
         SYNTAX DisplayString
         MAX-ACCESS accessible-for-notify
         STATUS current
         DESCRIPTION
            "This object indicate the procotol type of alarm,
             0:tcp,1:udp,2:icmp,3:total "
         ::= { dsliteAFTRAlarmScalar 2 }

      dsliteAFTRAlarmMapAddrName OBJECT-TYPE
         SYNTAX DisplayString
         MAX-ACCESS accessible-for-notify
         STATUS current
         DESCRIPTION
            "This object indicate the name of dsliteNATMapAddrName "
         ::= { dsliteAFTRAlarmScalar 3 }

      dsliteAFTRAlarmSpecificIP OBJECT-TYPE
         SYNTAX DisplayString
         MAX-ACCESS accessible-for-notify
         STATUS current
         DESCRIPTION
            " This object indicate the IP address whose port usage


Fu, et al.            Expires November 30, 2012              [Page 21]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


             reach threshold "
         ::= { dsliteAFTRAlarmScalar 4 }

      dsliteAFTRAlarmConnectNumber OBJECT-TYPE
         SYNTAX Integer32 (60..90)
         MAX-ACCESS read-write
         STATUS current
         DESCRIPTION
            " This object indicate the threshold of DS-Lite
              connections alarm."
         ::= { dsliteAFTRAlarmScalar 5 }

      dsliteStatisticTable OBJECT-TYPE
         SYNTAX SEQUENCE OF dsliteStatisticEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
            "This table provides statistical information
             of DS-Lite."
         ::= { dsliteInfo 4 }

      dsliteStatisticEntry OBJECT-TYPE
         SYNTAX dsliteStatisticEntry
         MAX-ACCESS not-accessible
         STATUS current
         DESCRIPTION
            "This table provides statistical information
             of DS-Lite."
         INDEX { dsliteStatisticInstanceName }
         ::= { dsliteStatisticTable 1 }

      dsliteStatisticEntry ::=
         SEQUENCE {
       dsliteStatisticInstanceName           DisplayString,
       dsliteStatisticDiscard                Counter64,
       dsliteStatisticReceived               Counter64,
       dsliteStatisticTransmitted            Counter64,
       dsliteStatisticIpv4Session            Counter64,
       dsliteStatisticIpv6Session            Counter64,
       dsliteStatisticStorageType            StorageType,
       dsliteStatisticRowStatus              RowStatus
      }

      dsliteStatisticInstanceName OBJECT-TYPE
         SYNTAX DisplayString (SIZE (1..31))
         MAX-ACCESS read-only
         STATUS current


Fu, et al.            Expires November 30, 2012              [Page 22]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         DESCRIPTION
            " This object indicate the instance name
             that is limited."
         ::= { dsliteStatisticEntry 1 }

      dsliteStatisticDiscard OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            " This object indicate the count number of
              the discarded packet."
        ::= { dsliteStatisticEntry 2 }


      dsliteStatisticReceived OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            "This object indicate the count number of
             received packet count."
         ::= { dsliteStatisticEntry 3 }

      dsliteStatisticTransmitted OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            "This object indicate the count number of
             transmitted packet count."
         ::= { dsliteStatisticEntry 4 }

      dsliteStatisticIpv4Session OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            " This object indicate the number of the
              current IPv4 Session."
         ::= { dsliteStatisticEntry 5 }

      dsliteStatisticIpv6Session OBJECT-TYPE
         SYNTAX Counter64
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION


Fu, et al.            Expires November 30, 2012              [Page 23]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


           " This object indicate the number of the
              current IPv6 Session."
        ::= { dsliteStatisticEntry 6 }

      dsliteStatisticRowStatus OBJECT-TYPE
         SYNTAX RowStatus
         MAX-ACCESS read-create
         STATUS current
         DESCRIPTION
            "Create or delete table row."
         ::= { dsliteStatisticEntry 7 }

   ---dslite trap

      dsliteTunnelNumAlarm NOTIFICATION-TYPE
         STATUS current
         DESCRIPTION
            "This trap is triggered when dslite tunnel
             reach the threshold."
         ::= { dsliteTraps 1 }

      dsliteAFTRUserSessionNumAlarm NOTIFICATION-TYPE
         OBJECTS { dsliteAFTRAlarmProtocolType,
                   dsliteAFTRAlarmB4Addr }
         STATUS current
         DESCRIPTION
         " This trap is triggered when sessions of
           user reach the threshold."
         ::= { dsliteTraps 2 }

      dsliteAFTRPortUsageOfSpecificIpAlarm NOTIFICATION-TYPE
         OBJECTS { dsliteAFTRAlarmMapAddrName,
                dsliteAFTRAlarmSpecificIP }
         STATUS current
         DESCRIPTION
            "This trap is triggered when used NAT
             ports of map address reach the threshold."
   ::= { dsliteTraps 3 }

       --Module Conformance statement

      dsliteCompliances OBJECT IDENTIFIER ::= { dsliteConformance 1 }

      dsliteCompliance MODULE-COMPLIANCE
         STATUS current
         DESCRIPTION
            "Description."


Fu, et al.            Expires November 30, 2012              [Page 24]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


         MODULE -- this module
             MANDATORY-GROUPS { dsliteNATMapGroup,
                 dsliteTunnelGroup }
        ::= { dsliteCompliances 1 }

      dsliteGroups OBJECT IDENTIFIER ::= { dsliteConformance 2 }

      dsliteAFTRAlarmScalarGroup OBJECT-GROUP
         OBJECTS { dsliteAFTRAlarmB4Addr, dsliteAFTRAlarmProtocolType,
             dsliteAFTRAlarmMapAddrName, dsliteAFTRAlarmSpecificIP,
             dsliteAFTRAlarmConnectNumber }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             information about AFTR alarming Scalar."
      ::= { dsliteGroups 1 }

      dsliteNATMapGroup OBJECT-GROUP
         OBJECTS { dsliteNATMapIndex, dsliteNATMapAddrName,
                  dsliteNATMapEntryType, dsliteNATMapLocalAddrFrom,
                  dsliteNATMapLocalAddrTo, dsliteNATMapLocalPortFrom,
                  dsliteNATMapLocalPortTo, dsliteNATMapGlobalAddrFrom,
                  dsliteNATMapGlobalAddrTo, dsliteNATMapGlobalPortFrom,
                  dsliteNATMapGlobalPortTo, dsliteNATMapAddrUsed,
                  dsliteNATMapStorageType, dsliteNATMapRowStatu }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             information about NAT address mapping."
         ::= { dsliteGroups 2 }

      dsliteTunnelGroup OBJECT-GROUP
         OBJECTS { dsliteTunnelStartAddress, dsliteTunnelStartAddPreLen,
                 dsliteTunnelEndAddress,
                 dsliteTunnelStatus,
                 dsliteTunnelStorageType }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             information of tunnel in ds-lite."
         ::= { dsliteGroups 3 }

      dsliteNATBindGroup OBJECT-GROUP
         OBJECTS { dsliteNATBindLocalAddr, dsliteNATBindLocalPort,
                  dsliteNATBindGlobalAddr, dsliteNATBindGlobalPort,
                  dsliteNATBindId, dsliteB4Addr, dsliteB4PreLen,
                  dsliteNATBindMapIndex, dsliteNATBindSessions,


Fu, et al.            Expires November 30, 2012              [Page 25]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


                  dsliteNATBindMaxIdleTime,
                  dsliteNATBindCurrentIdleTime,
                  dsliteNATBindInTranslates,
                  dsliteNATBindOutTranslates }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             information about NAT Bind."
         ::= { dsliteGroups 4 }

      dsliteSessionLimitGroup OBJECT-GROUP
         OBJECTS { dsliteSessionLimitInstanceName,
                   dsliteSessionLimitType, dsliteSessionLimitNumber,
                   dsliteSessionLimitStorageType,
                   dsliteSessionLimitRowStatus }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             information about port limit."
         ::= { dsliteGroups 5 }

      dslitePortLimitGroup OBJECT-GROUP
         OBJECTS { dslitePortLimitInstanceName,
                   dslitePortLimitType, dslitePortLimitNumber,
                   dslitePortLimitStorageType,
                   dslitePortLimitRowStatus }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             information about port limit."
         ::= { dsliteGroups 6 }

      dsliteStatisticGroup OBJECT-GROUP
         OBJECTS { dsliteStatisticInstanceName,
                   dsliteStatisticDiscard,
                   dsliteStatisticReceived,
                   dsliteStatisticTransmitted,
                   dsliteStatisticIpv4Session,
                   dsliteStatisticIpv6Session,
                   dsliteStatisticStorageType,
                   dsliteStatisticRowStatus }
        STATUS current
        DESCRIPTION
           " The collection of this objects are used to give the
             statistical information of ds-lite."
        ::= { dsliteGroups 7 }



Fu, et al.            Expires November 30, 2012              [Page 26]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


      dsliteTrapsGroup NOTIFICATION-GROUP
         NOTIFICATIONS { dsliteTunnelNumAlarm,
                         dsliteAFTRUserSessionNumAlarm,
                         dsliteAFTRPortUsageOfSpecificIpAlarm }
         STATUS current
         DESCRIPTION
            "The collection of this objects are used to give the
             trap information of ds-lite."
         ::= { dsliteGroups 8 }

             END

9. Extending this MIB for Gateway Initiated Dual-Stack Lite

   Similar to DS-lite, GI-DS-lite enables the service provider to
   share public IPv4 addresses among different customers by combining
   tunneling and NAT. GI-DS-lite extends existing access tunnels
   beyond the access gateway to an IPv4-IPv4 NAT using softwires with
   an embedded context identifier that uniquely identifies the end host
   the tunneled packets belong to. The MIB defined in this document can
   easily extended to use for GI-DS-Lite scenario. New object as CID
   SHOULD be extended to the dsliteTunnelTable. And a new object as
   dsliteTunnelID can be defined in DS-Lite MIB as SWID in GI-DS-Lite.
   Both CID and SWID SHOULD be extended to the dsliteNATBindTable. It
   will use the combination of CID and SWID as the unique identifier for
   the end host and store it in the NAT binding entry.

10. IANA Considerations

   The MIB module in this document uses the following IANA-assigned
   OBJECT IDENTIFIER values recorded in the SMI Numbers registry, and
   the following IANA-assigned tunnelType values recorded in the
   IANAtunnelType-MIB registry:

      Descriptor        OBJECT IDENTIFIER value
      ----------        -----------------------
      DSLite-MIB         { transmission XXX }

      IANAtunnelType ::= TEXTUAL-CONVENTION

                 SYNTAX     INTEGER {

                            dsLite ("XX")        -- dslite tunnel

                            }




Fu, et al.            Expires November 30, 2012              [Page 27]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


   Notes: As the Appendix A of the IP Tunnel MIB[RFC4087] described that
   it has already assigned the value direct(2) to indicate the tunnel
   type is IP in ip tunnel, but it is still difficult to distinguish the
   DS-Lite tunnel packets and the normal IP in IP tunnel packets in the
   scenario of the AFTR connecting to both the DS-lite tunnel and IP in
   IP tunnel.

11. Security Considerations

   The DS-Lite MIB module can be used for configuration of certain
   objects, and anything that can be incorrectly configured, with
   potentially disastrous results. Because this MIB module reuses the
   IP tunnel MIB and nat MIB, the security considerations for these MIBs
   are also applicable to the DS-Lite MIB.

   Unauthorized read access todsliteTunnelEndAddress, or any object in
   the dsliteBindRelationTable or dslitePortBindRelationTable would
   reveal information about the mapping information.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

12. References

     12.1. Normative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.





Fu, et al.            Expires November 30, 2012              [Page 28]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


   [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Structure of Management Information Version 2 (SMIv2)",
             RFC 2578, April 1999.

   [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual
             Conventions for SMIv2", RFC 2579, April 1999.

   [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Conformance Statements for SMIv2", RFC 2580, April 1999.

   [RFC2863] McCloghrie, K. and F. Kastenholz. "The Interfaces Group
             MIB", RFC 2863, June 2000.

   [RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
             Architecture for Describing Simple Network Management
             Protocol (SNMP) Management Frameworks", RFC 3411, December
             2002.

   [RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
             Schoenwaelder, "Textual Conventions for Internet Network
             Addresses", RFC 4001, February 2005.

   [RFC4008] Rohit, R., Srisuresh, P., Raghunarayan,R., Pai, N., and
             Wang, C., "Definitions of Managed Objects for Network
             Address Translators (NAT)", RFC 4008, March 2005.

   [RFC4087] Thaler, D., "IP Tunnel MIB", RFC 4087, June 2005.

   [RFC6333] Durand, A., Droms, R., Woodyatt, J., and Y. Lee, "Dual-
             Stack Lite Broadband Deployments Following IPv4
             Exhaustion", RFC6333, August 2011.

     12.2. Informative References

   [I-D.ietf-softwire-gateway-init-ds-lite]
             Brockners, F., Gundavelli, S., Speicher, S., and D. Ward,
             "Gateway Initiated Dual-Stack Lite Deployment",
             draft-ietf-softwire-gateway-init-ds-lite-08 (work in
             progress), July 2011.

   [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
             "Introduction and Applicability Statements for Internet-
             Standard Management Framework", RFC 3410, December 2002.

13. Change Log [RFC Editor please remove]

   draft-fu-softwire-dslite-mib-00, original version, 2011-05-04


Fu, et al.            Expires November 30, 2012              [Page 29]

Internet-Draft   draft-fu-softwire-dslite-mib-05.txt          May 2012


   draft-fu-softwire-dslite-mib-01, 01 version, 2011-07-11

   draft-fu-softwire-dslite-mib-02, 02 version, 2011-08-27

   draft-fu-softwire-dslite-mib-03, 03 version, 2012-02-22

   draft-fu-softwire-dslite-mib-04, 04 version, 2012-04-24

   draft-fu-softwire-dslite-mib-05, 05 version, 2012-05-28



Author's Addresses

   Yu Fu
   Huawei Technologies Co., Ltd
   Huawei Building, 156 Beiqing Rd.,
   Hai-Dian District, Beijing 100095
   P.R. China
   Email: eleven.fuyu@huawei.com

   Sheng Jiang
   Huawei Technologies Co., Ltd
   Huawei Building, 156 Beiqing Rd.,
   Hai-Dian District, Beijing 100095
   P.R. China
   Email: jiangsheng@huawei.com

   Jiang Dong
   Tsinghua University
   Department of Computer Science, Tsinghua University
   Beijing  100084
   P.R. China
   Email: dongjiang@csnet1.cs.tsinghua.edu.cn

   Yuchi Chen
   Tsinghua University
   Department of Computer Science, Tsinghua University
   Beijing  100084
   P.R. China
   Email: flashfoxmx@gmail.com








Fu, et al.            Expires November 30, 2012              [Page 30]