IPPM T. Zhou, Ed. Internet-Draft Huawei Intended status: Standards Track J. Guichard Expires: December 28, 2019 Futurewei F. Brockners S. Raghavan Cisco Systems June 26, 2019 A YANG Data Model for In-Situ OAM draft-zhou-ippm-ioam-yang-04 Abstract In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in user packets while the packets traverse a path between two points in the network. This document defines a YANG module for the IOAM function. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on December 28, 2019. Copyright Notice Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved. Zhou, Ed., et al. Expires December 28, 2019 [Page 1] Internet-Draft YANG Model for IOAM June 2019 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Tree Diagrams . . . . . . . . . . . . . . . . . . . . . . 3 2. Design of the IOAM YANG Data Model . . . . . . . . . . . . . 3 2.1. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2. Preallocated Tracing Profile . . . . . . . . . . . . . . 4 2.3. Incremental Tracing Profile . . . . . . . . . . . . . . . 5 2.4. Proof of Transit Profile . . . . . . . . . . . . . . . . 5 2.5. Edge to Edge Profile . . . . . . . . . . . . . . . . . . 6 3. IOAM YANG Module . . . . . . . . . . . . . . . . . . . . . . 6 4. Security Considerations . . . . . . . . . . . . . . . . . . . 18 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 19 6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 20 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 20 7.1. Normative References . . . . . . . . . . . . . . . . . . 20 7.2. Informative References . . . . . . . . . . . . . . . . . 21 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 21 1. Introduction In-situ Operations, Administration, and Maintenance (IOAM) [I-D.ietf-ippm-ioam-data] records OAM information within user packets while the packets traverse a network. The data types and data formats for IOAM data records have been defined in [I-D.ietf-ippm-ioam-data]. The IOAM data can be embedded in many protocol encapsulations such as Network Services Header, Segment Routing, and IPv6 [I-D.brockners-inband-oam-transport]. This document defines a data model for IOAM capabilities using the YANG data modeling language [RFC7950]. This YANG model supports all the three categories of IOAM data, which are Tracing Option, Proof of Transit Option, and Edge-to-Edge Option. Zhou, Ed., et al. Expires December 28, 2019 [Page 2] Internet-Draft YANG Model for IOAM June 2019 1.1. Tree Diagrams The meaning of the symbols in these diagrams is as follows: o Brackets "[" and "]" enclose list keys. o Curly braces "{" and "}" contain names of optional features that make the corresponding node conditional. o Abbreviations before data node names: "rw" means configuration (read-write), "ro" state data (read-only). o Symbols after data node names: "?" means an optional node, "!" a container with presence, and "*" denotes a "list" or "leaf-list". o Parentheses enclose choice and case nodes, and case nodes are also marked with a colon (":"). o Ellipsis ("...") stands for contents of subtrees that are not shown. 2. Design of the IOAM YANG Data Model 2.1. Profiles The IOAM model is organized as list of profiles as shown in the following figure. Each profile associates with one flow and the corresponding IOAM information. module: ietf-ioam +--rw ioam +--rw ioam-profiles +--rw admin-config | +--rw enabled? boolean +--rw ioam-profile* [profile-name] +--rw profile-name string +--rw filter | +--rw filter-type? ioam-filter-type | +--rw acl-name? -> /acl:acls/acl/name +--rw protocol-type? ioam-protocol-type +--rw incremental-tracing-profile {incremental-trace}? | ... +--rw preallocated-tracing-profile {preallocated-trace}? | ... +--rw pot-profile {proof-of-transit}? | ... +--rw e2e-profile {edge-to-edge}? ... Zhou, Ed., et al. Expires December 28, 2019 [Page 3] Internet-Draft YANG Model for IOAM June 2019 The "enabled" is an administrative configuration. When it is set to true, IOAM configuration is enabled for the system. Meanwhile, the IOAM data-plane functionality is enabled. The "filter" is used to identify a flow, where the IOAM profile can apply. There may be multiple filter types. ACL is the default one. The IOAM data can be encapsulated into multiple protocols, e.g., IPv6 [RFC8200], Geneve [I-D.ietf-nvo3-geneve],VxLAN-GPE [I-D.ietf-nvo3-vxlan-gpe]. The "protocol-type" is used to indicate where the IOAM is applied. For example, if the "protocol-type" is IPv6, the IOAM ingress node will encapsulate the associated flow with the IPv6-IOAM [I-D.brockners-inband-oam-transport] format. IOAM data includes three usage options with four encapsulation types, i.e., incremental tracing data, preallocated tracing data, prove of transit data and end to end data. In practice, multiple IOAM data types can be encapsulated into the same IOAM header. The "ioam- profile" contains a set of sub-profiles, each of which relates to one encapsulation type. The configured object may not support all the sub-profiles. The supported sub-profiles are indicated by 4 defined features, i.e., "incremental-trace", "preallocated-trace", "proof-of- transit", "edge-to-edge". 2.2. Preallocated Tracing Profile The IOAM tracing data is expected to be collected at every node that a packet traverses to ensure visibility into the entire path a packet takes within an IOAM domain. The preallocated tracing option will create pre-allocated space for each node to populate its information . The "preallocated-tracing-profile" contains the detailed information for the preallocated tracing data. The information includes: o enabled: indicates whether the preallocated tracing profile is enabled. o node-action: indicates the operation (e.g., encapsulate IOAM header, transit the IOAM data, or decapsulate IOAM header) applied to the dedicated flow. o use-namespace: indicate the namespace used for the trace types. o trace-type: indicates the per-hop data to be captured by the IOAM enabled nodes and included in the node data list. o Loopback mode is used to send a copy of a packet back towards the source. Zhou, Ed., et al. Expires December 28, 2019 [Page 4] Internet-Draft YANG Model for IOAM June 2019 +--rw preallocated-tracing-profile {preallocated-trace}? +--rw enabled? boolean +--rw node-action? ioam-node-action +--rw trace-types | +--rw use-namespace? ioam-namespace | +--rw trace-type* ioam-trace-type +--rw enable-loopback-mode? boolean 2.3. Incremental Tracing Profile The incremental tracing option contains a variable node data fields where each node allocates and pushes its node data immediately following the option header. The "incremental-tracing-profile" contains the detailed information for the incremental tracing data. The detailed information is the same as the Preallocated Tracing Profile, but with one more variable, "max-length", which restricts the length of the IOAM header. +--rw incremental-tracing-profile {incremental-trace}? +--rw enabled? boolean +--rw node-action? ioam-node-action +--rw trace-types | +--rw use-namespace? ioam-namespace | +--rw trace-type* ioam-trace-type +--rw enable-loopback-mode? boolean +--rw max-length? uint32 2.4. Proof of Transit Profile The IOAM Proof of Transit data is to support the path or service function chain verification use cases. The "pot-profile" contains the detailed information for the prove of transit data. The detailed information are described in [I-D.brockners-proof-of-transit]. +--rw pot-profile {proof-of-transit}? +--rw enabled? boolean +--rw active-profile-index? pot:profile-index-range +--rw pot-profile-list* [pot-profile-index] +--rw pot-profile-index profile-index-range +--rw prime-number uint64 +--rw secret-share uint64 +--rw public-polynomial uint64 +--rw lpc uint64 +--rw validator? boolean +--rw validator-key? uint64 +--rw bitmask? uint64 Zhou, Ed., et al. Expires December 28, 2019 [Page 5] Internet-Draft YANG Model for IOAM June 2019 2.5. Edge to Edge Profile The IOAM edge to edge option is to carry data that is added by the IOAM encapsulating node and interpreted by IOAM decapsulating node. The "e2e-profile" contains the detailed information for the edge to edge data. The detailed information includes: o enabled: indicates whether the edge to edge profile is enabled. o node-action is the same semantic as in Section 2.2. o use-namespace: indicate the namespace used for the edge to edge types. o e2e-type indicates data to be carried from the ingress IOAM node to the egress IOAM node. +--rw e2e-profile {edge-to-edge}? +--rw enabled? boolean +--rw node-action? ioam-node-action +--rw e2e-types +--rw use-namespace? ioam-namespace +--rw e2e-type* ioam-e2e-type 3. IOAM YANG Module file "ietf-ioam@2018-06-27.yang" module ietf-ioam { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-ioam"; prefix "ioam"; import ietf-pot-profile { prefix "pot"; } import ietf-access-control-list { prefix "acl"; } organization "IETF IPPM (IP Performance Metrics) Working Group"; contact "WG Web: WG List: Editor: zhoutianran@huawei.com"; description Zhou, Ed., et al. Expires December 28, 2019 [Page 6] Internet-Draft YANG Model for IOAM June 2019 "This YANG module specifies a vendor-independent data model for the in Situ OAM (iOAM)."; revision 2019-06-26 { description "Initial revision."; reference "draft-zhou-ippm-ioam-yang"; } /* * FEATURES */ feature incremental-trace { description "This feature indicated that the incremental tracing mode is supported"; } feature preallocated-trace { description "This feature indicated that the preallocated tracing mode is supported"; } feature proof-of-transit { description "This feature indicated that the proof of transit mode is supported"; } feature edge-to-edge { description "This feature indicated that the edge to edge mode is supported"; } /* * IDENTITIES */ identity base-filter { description "Base identity to represent a filter. A filter is used to specify the flow to apply the iOAM profile. "; } Zhou, Ed., et al. Expires December 28, 2019 [Page 7] Internet-Draft YANG Model for IOAM June 2019 identity acl-filter { base base-filter; description "Apply ACL rule to specify the flow."; } identity base-protocol { description "Base identity to represent the carrier protocol. It's used to indicate what layer and protocol the iOAM data is embedded."; } identity ipv6-protocol { base base-protocol; description "The described iOAM data is embedded in ipv6 protocol."; } identity base-node-action { description "Base identity to represent the node actions. It's used to indicate what action the node will take."; } identity encapsulate { base base-node-action; description "indicate the node is to encapsulate the iOAM packet"; } identity transit { base base-node-action; description "indicate the node is to transit the iOAM packet"; } identity decapsulate { base base-node-action; description "indicate the node is to decapsulate the iOAM packet"; } identity base-trace-type { description "Base identity to represent trace types"; } identity trace-hop-lim-node-id { Zhou, Ed., et al. Expires December 28, 2019 [Page 8] Internet-Draft YANG Model for IOAM June 2019 base base-trace-type; description "indicates presence of Hop_Lim and node_id in the node data."; } identity trace-if-id { base base-trace-type; description "indicates presence of ingress_if_id and egress_if_id in the node data."; } identity trace-timestamp-seconds { base base-trace-type; description "indicates presence of time stamp seconds in the node data."; } identity trace-timestamp-nanoseconds { base base-trace-type; description "indicates presence of time stamp nanoseconds in the node data."; } identity trace-transit-delay { base base-trace-type; description "indicates presence of transit delay in the node data."; } identity trace-namespace-data { base base-trace-type; description "indicates presence of namespace specific data (short format) in the node data."; } identity trace-queue-depth { base base-trace-type; description "indicates presence of queue depth in the node data."; } identity trace-opaque-state-snapshot { base base-trace-type; description "indicates presence of variable length Opaque State Snapshot Zhou, Ed., et al. Expires December 28, 2019 [Page 9] Internet-Draft YANG Model for IOAM June 2019 field."; } identity trace-hop-lim-node-id-wide { base base-trace-type; description "indicates presence of Hop_Lim and node_id wide in the node data."; } identity trace-if-id-wide { base base-trace-type; description "indicates presence of ingress_if_id and egress_if_id wide in the node data."; } identity trace-namespace-data-wide { base base-trace-type; description "indicates presence of namespace specific data in wide format in the node data."; } identity trace-buffer-occupancy { base base-trace-type; description "indicates presence of buffer occupancy in the node data."; } identity trace-checksum-complement { base base-trace-type; description "indicates presence of the Checksum Complement node data."; } identity base-pot-type { description "Base identity to represent pot types"; } identity pot-bytes-16 { base base-pot-type; description "POT data is a 16 Octet field."; } identity base-e2e-type { Zhou, Ed., et al. Expires December 28, 2019 [Page 10] Internet-Draft YANG Model for IOAM June 2019 description "Base identity to represent e2e types"; } identity e2e-seq-num-64 { base base-e2e-type; description "indicates presence of a 64-bit sequence number"; } identity e2e-seq-num-32 { base base-e2e-type; description "indicates presence of a 32-bit sequence number"; } identity e2e-timestamp-seconds { base base-e2e-type; description "indicates presence of timestamp seconds for the transmission of the frame"; } identity e2e-timestamp-subseconds { base base-e2e-type; description "indicates presence of timestamp subseconds for the transmission of the frame"; } identity base-namespace { description "Base identity to represent the namespace"; } identity namespace-ietf { base base-namespace; description "namespace that specified in IETF."; } /* * TYPE DEFINITIONS */ typedef ioam-filter-type { type identityref { base base-filter; Zhou, Ed., et al. Expires December 28, 2019 [Page 11] Internet-Draft YANG Model for IOAM June 2019 } description "Specifies a known type of filter."; } typedef ioam-protocol-type { type identityref { base base-protocol; } description "Specifies a known type of carrier protocol for the iOAM data."; } typedef ioam-node-action { type identityref { base base-node-action; } description "Specifies a known type of node action."; } typedef ioam-trace-type { type identityref { base base-trace-type; } description "Specifies a known trace type."; } typedef ioam-pot-type { type identityref { base base-pot-type; } description "Specifies a known pot type."; } typedef ioam-e2e-type { type identityref { base base-e2e-type; } description "Specifies a known e2e type."; } typedef ioam-namespace { type identityref { base base-namespace; Zhou, Ed., et al. Expires December 28, 2019 [Page 12] Internet-Draft YANG Model for IOAM June 2019 } description "Specifies the supported namespace."; } /* * GROUP DEFINITIONS */ grouping ioam-filter { description "A grouping for iOAM filter definition"; leaf filter-type { type ioam-filter-type; description "filter type"; } leaf acl-name { when "../filter-type = 'acl-filter'"; type leafref { path "/acl:acls/acl:acl/acl:name"; } description "Access Control List name."; } } grouping ioam-incremental-tracing-profile { description "A grouping for incremental tracing profile."; leaf node-action { type ioam-node-action; description "node action"; } container trace-types { when "../node-action = 'encapsulate'"; description "the list of trace types for encapsulate"; leaf use-namespace { type ioam-namespace; description "the namespace used for the encapsulation"; } leaf-list trace-type { type ioam-trace-type; Zhou, Ed., et al. Expires December 28, 2019 [Page 13] Internet-Draft YANG Model for IOAM June 2019 description "The trace type is only defined at the encapsulation node."; } } leaf enable-loopback-mode { when "../node-action = 'encapsulate'"; type boolean; default false; description "Loopback mode is used to send a copy of a packet back towards the source. The loopback mode is only defined at the encapsulation node."; } leaf max-length { when "../node-action = 'encapsulate'"; type uint32; description "This field specifies the maximum length of the node data list in octets. The max-length is only defined at the encapsulation node. And it's only used for the incremental tracing mode."; } } grouping ioam-preallocated-tracing-profile { description "A grouping for incremental tracing profile."; leaf node-action { type ioam-node-action; description "node action"; } container trace-types { when "../node-action = 'encapsulate'"; description "the list of trace types for encapsulate"; leaf use-namespace { type ioam-namespace; description "the namespace used for the encapsulation"; } leaf-list trace-type { type ioam-trace-type; Zhou, Ed., et al. Expires December 28, 2019 [Page 14] Internet-Draft YANG Model for IOAM June 2019 description "The trace type is only defined at the encapsulation node."; } } leaf enable-loopback-mode { when "../node-action = 'encapsulate'"; type boolean; default false; description "Loopback mode is used to send a copy of a packet back towards the source. The loopback mode is only defined at the encapsulation node."; } } grouping ioam-e2e-profile { description "A grouping for tracing profile."; leaf node-action { type ioam-node-action; description "indicate how the node act for this profile"; } container e2e-types { when "../node-action = 'encapsulate'"; description "the list of e2e types for encapsulate"; leaf use-namespace { type ioam-namespace; description "the namespace used for the encapsulation"; } leaf-list e2e-type { type ioam-e2e-type; description "The e2e type is only defined at the encapsulation node."; } } } grouping ioam-admin-config { description "IOAM top-level administrative configuration."; Zhou, Ed., et al. Expires December 28, 2019 [Page 15] Internet-Draft YANG Model for IOAM June 2019 leaf enabled { type boolean; default false; description "When true, IOAM configuration is enabled for the system. Meanwhile, the IOAM data-plane functionality is enabled."; } } /* * DATA NODES */ container ioam { description "iOAM top level container"; container ioam-profiles { description "Contains a list of iOAM profiles."; container admin-config { description "Contains all the administrative configurations related to the IOAM functionalities and all the IOAM profiles."; uses ioam-admin-config; } list ioam-profile { key "profile-name"; ordered-by user; description "A list of iOAM profiles that configured on the node."; leaf profile-name { type string; mandatory true; description "Unique identifier for each iOAM profile"; } container filter { uses ioam-filter; description "The filter which is used to indicate the flow to apply iOAM."; } Zhou, Ed., et al. Expires December 28, 2019 [Page 16] Internet-Draft YANG Model for IOAM June 2019 leaf protocol-type { type ioam-protocol-type; description "This item is used to indicate the carrier protocol where the iOAM is applied."; } container incremental-tracing-profile { if-feature incremental-trace; description "describe the profile for incremental tracing option"; leaf enabled { type boolean; default false; description "When true, apply incremental tracing option to the specified flow identified by the filter."; } uses ioam-incremental-tracing-profile; } container preallocated-tracing-profile { if-feature preallocated-trace; description "describe the profile for preallocated tracing option"; leaf enabled { type boolean; default false; description "When true, apply preallocated tracing option to the specified flow identified by the following filter."; } uses ioam-preallocated-tracing-profile; } container pot-profile { if-feature proof-of-transit; description "describe the profile for pot option"; leaf enabled { type boolean; default false; description Zhou, Ed., et al. Expires December 28, 2019 [Page 17] Internet-Draft YANG Model for IOAM June 2019 "When true, apply Proof of Transit option to the specified flow identified by the following filter."; } leaf active-profile-index { type pot:profile-index-range; description "Proof of transit profile index that is currently active. Will be set in the first hop of the path or chain. Other nodes will not use this field."; } uses pot:pot-profile; } container e2e-profile { if-feature edge-to-edge; description "describe the profile for e2e option"; leaf enabled { type boolean; default false; description "When true, apply End to end option to the specified flow identified by the following filter."; } uses ioam-e2e-profile; } } } } } 4. Security Considerations The YANG module specified in this document defines a schema for data that is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC5246]. The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF or RESTCONF users to a Zhou, Ed., et al. Expires December 28, 2019 [Page 18] Internet-Draft YANG Model for IOAM June 2019 preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability: o /ioam/ioam-profiles/admin-config The items in the container above include the top level administrative configurations related to the IOAM functionalities and all the IOAM profiles. Unexpected changes to these items could lead to the IOAM function disruption and/ or misbehavior of all the IOAM profiles. o /ioam/ioam-profiles/ioam-profile The entries in the list above include the whole IOAM profile configurations which indirectly create or modify the device configurations. Unexpected changes to these entries could lead to the mistake of the IOAM behavior for the corresponding flows. 5. IANA Considerations RFC Ed.: In this section, replace all occurrences of 'XXXX' with the actual RFC number (and remove this note). IANA is requested to assign a new URI from the IETF XML Registry [RFC3688]. The following URI is suggested: URI: urn:ietf:params:xml:ns:yang:ietf-ioam Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. This document also requests a new YANG module name in the YANG Module Names registry [RFC7950] with the following suggestion: name: ietf-ioam namespace: urn:ietf:params:xml:ns:yang:ietf-ioam prefix: ioam reference: RFC XXXX Zhou, Ed., et al. Expires December 28, 2019 [Page 19] Internet-Draft YANG Model for IOAM June 2019 6. Acknowledgements For their valuable comments, discussions, and feedback, we wish to acknowledge Greg Mirsky and Reshad Rahman. 7. References 7.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004, . [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, . [RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, . [RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011, . [RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", RFC 6536, DOI 10.17487/RFC6536, March 2012, . [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016, . [RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017, . Zhou, Ed., et al. Expires December 28, 2019 [Page 20] Internet-Draft YANG Model for IOAM June 2019 [RFC8200] Deering, S. and R. Hinden, "Internet Protocol, Version 6 (IPv6) Specification", STD 86, RFC 8200, DOI 10.17487/RFC8200, July 2017, . 7.2. Informative References [I-D.brockners-inband-oam-transport] Brockners, F., Bhandari, S., Govindan, V., Pignataro, C., Gredler, H., Leddy, J., Youell, S., Mizrahi, T., Mozes, D., Lapukhov, P., and R. Chang, "Encapsulations for In- situ OAM Data", draft-brockners-inband-oam-transport-05 (work in progress), July 2017. [I-D.brockners-proof-of-transit] Brockners, F., Bhandari, S., Dara, S., Pignataro, C., Leddy, J., Youell, S., Mozes, D., and T. Mizrahi, "Proof of Transit", draft-brockners-proof-of-transit-05 (work in progress), May 2018. [I-D.ietf-ippm-ioam-data] Brockners, F., Bhandari, S., Pignataro, C., Gredler, H., Leddy, J., Youell, S., Mizrahi, T., Mozes, D., Lapukhov, P., Chang, R., daniel.bernier@bell.ca, d., and J. Lemon, "Data Fields for In-situ OAM", draft-ietf-ippm-ioam- data-05 (work in progress), March 2019. [I-D.ietf-nvo3-geneve] Gross, J., Ganga, I., and T. Sridhar, "Geneve: Generic Network Virtualization Encapsulation", draft-ietf- nvo3-geneve-13 (work in progress), March 2019. [I-D.ietf-nvo3-vxlan-gpe] Maino, F., Kreeger, L., and U. Elzur, "Generic Protocol Extension for VXLAN", draft-ietf-nvo3-vxlan-gpe-07 (work in progress), April 2019. Authors' Addresses Tianran Zhou Huawei 156 Beiqing Rd. Beijing 100095 China Email: zhoutianran@huawei.com Zhou, Ed., et al. Expires December 28, 2019 [Page 21] Internet-Draft YANG Model for IOAM June 2019 Jim Guichard Futurewei United States of America Email: james.n.guichard@futurewei.com Frank Brockners Cisco Systems Hansaallee 249, 3rd Floor Duesseldorf, Nordrhein-Westfalen 40549 Germany Email: fbrockne@cisco.com Srihari Raghavan Cisco Systems Tril Infopark Sez, Ramanujan IT City Neville Block, 2nd floor, Old Mahabalipuram Road Chennai, Tamil Nadu 600113 India Email: srihari@cisco.com Zhou, Ed., et al. Expires December 28, 2019 [Page 22]