TOC 
Network Working GroupJ. Reschke
Internet-Draftgreenbytes
Intended status: Standards TrackMarch 30, 2010
Expires: October 1, 2010 


Application of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Header Fields
draft-reschke-rfc2231-in-http-11

Abstract

By default, message header field parameters in Hypertext Transfer Protocol (HTTP) messages can not carry characters outside the ISO-8859-1 character set. RFC 2231 defines an escaping mechanism for use in Multipurpose Internet Mail Extensions (MIME) headers. This document specifies a profile of that encoding suitable for use in HTTP header fields.

Editorial Note (To be removed by RFC Editor before publication)

There are multiple HTTP header fields that already use RFC 2231 encoding in practice (Content-Disposition) or might use it in the future (Link). The purpose of this document is to provide a single place where the generic aspects of RFC 2231 encoding in HTTP header fields are defined.

Distribution of this document is unlimited. Although this is not a work item of the HTTPbis Working Group, comments should be sent to the Hypertext Transfer Protocol (HTTP) mailing list at ietf-http-wg@w3.org, which may be joined by sending a message with subject "subscribe" to ietf-http-wg-request@w3.org.

Discussions of the HTTPbis Working Group are archived at http://lists.w3.org/Archives/Public/ietf-http-wg/.

XML versions, latest edits and the issues list for this document are available from http://greenbytes.de/tech/webdav/#draft-reschke-rfc2231-in-http. A collection of test cases is available at http://greenbytes.de/tech/tc2231/.

Note: as of February 2010, there were at least three independent implementations of the encoding defined in Section 3.2 (Parameter Value Character Set and Language Information): Konqueror (starting with 4.4.1), Mozilla Firefox, and Opera.

Status of This Memo

This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on October 1, 2010.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the BSD License.



Table of Contents

1.  Introduction
2.  Notational Conventions
3.  A Profile of RFC 2231 for Use in HTTP
    3.1.  Parameter Continuations
    3.2.  Parameter Value Character Set and Language Information
        3.2.1.  Examples
    3.3.  Language specification in Encoded Words
4.  Guidelines for Usage in HTTP Header Field Definitions
    4.1.  When to Use the Extension
    4.2.  Error Handling
5.  Security Considerations
6.  IANA Considerations
7.  Acknowledgements
8.  References
    8.1.  Normative References
    8.2.  Informative References
Appendix A.  Document History and Future Plans (to be removed by RFC Editor before publication)
Appendix B.  Change Log (to be removed by RFC Editor before publication)
    B.1.  Since draft-reschke-rfc2231-in-http-00
    B.2.  Since draft-reschke-rfc2231-in-http-01
    B.3.  Since draft-reschke-rfc2231-in-http-02
    B.4.  Since draft-reschke-rfc2231-in-http-03
    B.5.  Since draft-reschke-rfc2231-in-http-04
    B.6.  Since draft-reschke-rfc2231-in-http-05
    B.7.  Since draft-reschke-rfc2231-in-http-06
    B.8.  Since draft-reschke-rfc2231-in-http-07
    B.9.  Since draft-reschke-rfc2231-in-http-08
    B.10.  Since draft-reschke-rfc2231-in-http-09
    B.11.  Since draft-reschke-rfc2231-in-http-10
Appendix C.  Resolved issues (to be removed by RFC Editor before publication)
    C.1.  edit
    C.2.  charset-registered
    C.3.  parameter-abnf
    C.4.  value-abnf
    C.5.  iso8859
    C.6.  when-ext-value
    C.7.  repeated-param
    C.8.  handling-multiple
    C.9.  i18n-spoofing
    C.10.  multiple-inst-spoofing




 TOC 

1.  Introduction

By default, message header field parameters in HTTP ([RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.)) messages can not carry characters outside the ISO-8859-1 character set ([ISO‑8859‑1] (International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” 1998.)). RFC 2231 (Appendix of [RFC2231] (Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” November 1997.)) defines an escaping mechanism for use in MIME headers. This document specifies a profile of that encoding for use in HTTP header fields.

Note: this profile does not apply to message payloads transmitted over HTTP, such as when using the media type "multipart/form-data" ([RFC2388] (Masinter, L., “Returning Values from Forms: multipart/form-data,” August 1998.)).



 TOC 

2.  Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).

This specification uses the ABNF (Augmented Backus-Naur Form) notation defined in [RFC5234] (Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” January 2008.). The following core rules are included by reference, as defined in [RFC5234] (Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” January 2008.), Appendix B.1: ALPHA (letters), DIGIT (decimal 0-9), HEXDIG (hexadecimal 0-9/A-F/a-f) and LWSP (linear white space).

Note that this specification uses the term "character set" for consistency with other IETF specifications such as RFC 2277 (see [RFC2277] (Alvestrand, H., “IETF Policy on Character Sets and Languages,” January 1998.), Section 3). A more accurate term would be "character encoding" (a mapping of code points to octet sequences).



 TOC 

3.  A Profile of RFC 2231 for Use in HTTP

RFC 2231 defines several extensions to MIME. The sections below discuss if and how they apply to HTTP.

In short:



 TOC 

3.1.  Parameter Continuations

Section 3 of [RFC2231] (Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” November 1997.) defines a mechanism that deals with the length limitations that apply to MIME headers. These limitations do not apply to HTTP ([RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), Section 19.4.7).

Thus in HTTP, senders MUST NOT use parameter continuations, and therefore recipients do not need to support them.



 TOC 

3.2.  Parameter Value Character Set and Language Information

Section 4 of [RFC2231] (Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” November 1997.) specifies how to embed language information into parameter values, and also how to encode non-ASCII characters, dealing with restrictions both in MIME and HTTP header parameters.

However, RFC 2231 does not specify a mandatory-to-implement character set, making it hard for senders to decide which character set to use. Thus, recipients implementing this specification MUST support the character sets "ISO-8859-1" [ISO‑8859‑1] (International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” 1998.) and "UTF-8" [RFC3629] (Yergeau, F., “UTF-8, a transformation format of ISO 10646,” November 2003.).

Furthermore, RFC 2231 allows leaving out the character set information. The profile defined by this specification does not allow that.

The syntax for parameters is defined in Section 3.6 of [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.) (with RFC 2616 implied LWS translated to RFC 5234 LWSP):

  parameter     = attribute LWSP "=" LWSP value
  attribute     = token
  value         = token / quoted-string

  quoted-string = <quoted-string, defined in [RFC2616], Section 2.2>
  token         = <token, defined in [RFC2616], Section 2.2>

This specification modifies the grammar to:

  parameter     = reg-parameter / ext-parameter

  reg-parameter = parmname LWSP "=" LWSP value

  ext-parameter = parmname "*" LWSP "=" LWSP ext-value

  parmname      = 1*attr-char

  ext-value     = charset  "'" [ language ] "'" value-chars
                ; extended-initial-value,
                ; defined in [RFC2231], Section 7

  charset       = "UTF-8" / "ISO-8859-1" / mime-charset

  mime-charset  = 1*mime-charsetc
  mime-charsetc = ALPHA / DIGIT
                / "!" / "#" / "$" / "%" / "&"
                / "+" / "-" / "^" / "_" / "`"
                / "{" / "}" / "~"
                ; as <mime-charset> in Section 2.3 of [RFC2978]
                ; except that the single quote is not included
                ; SHOULD be registered in the IANA charset registry

  language      = <Language-Tag, defined in [RFC5646], Section 2.1>

  value-chars   = *( pct-encoded / attr-char )

  pct-encoded   = "%" HEXDIG HEXDIG
                ; see [RFC3986], Section 2.1

  attr-char     = ALPHA / DIGIT
                / "!" / "#" / "$" / "&" / "+" / "-" / "."
                / "^" / "_" / "`" / "|" / "~"
                ; token except ( "*" / "'" / "%" )

Thus, a parameter is either regular parameter (reg-parameter), as previously defined in Section 3.6 of [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), or an extended parameter (ext-parameter).

Extended parameters are those where the left hand side of the assignment ends with an asterisk character.

The value part of an extended parameter (ext-value) is a token that consists of three parts: the REQUIRED character set name (charset), the OPTIONAL language information (language), and a character sequence representing the actual value (value-chars), separated by single quote characters. Note that both character set names and language tags are restricted to the US-ASCII character set, and are matched case-insensitively (see [RFC2978] (Freed, N. and J. Postel, “IANA Charset Registration Procedures,” October 2000.), Section 2.3 and [RFC5646] (Phillips, A., Ed. and M. Davis, Ed., “Tags for Identifying Languages,” September 2009.), Section 2.1.1).

Inside the value part, characters not contained in attr-char are encoded into an octet sequence using the specified character set. That octet sequence then is percent-encoded as specified in Section 2.1 of [RFC3986] (Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” January 2005.).

Producers MUST NOT use character sets other than "UTF-8" ([RFC3629] (Yergeau, F., “UTF-8, a transformation format of ISO 10646,” November 2003.)) or "ISO-8859-1" ([ISO‑8859‑1] (International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” 1998.)). Extension character sets (ext-charset) are reserved for future use.

Note: recipients should be prepared to handle encoding errors, such as malformed or incomplete percent escape sequences, or non-decodable octet sequences, in a robust manner. This specification does not mandate any specific behavior, for instance the following strategies are all acceptable:

Note: the RFC 2616 token production ([RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), Section 2.2) differs from the production used in RFC 2231 (imported from Section 5.1 of [RFC2045] (Freed, N. and N. Borenstein, “Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies,” November 1996.)) in that curly braces ("{" and "}") are excluded. Thus, these two characters are excluded from the attr-char production as well.

Note: the <mime-charset> ABNF defined here differs from the one in Section 2.3 of [RFC2978] (Freed, N. and J. Postel, “IANA Charset Registration Procedures,” October 2000.) in that it does not allow the single quote character (see also RFC Editor Errata ID 1912). In practice, no character set names using that character have been registered at the time of this writing.



 TOC 

3.2.1.  Examples

Non-extended notation, using "token":

  foo: bar; title=Economy

Non-extended notation, using "quoted-string":

  foo: bar; title="US-$ rates"

Extended notation, using the unicode character U+00A3 (POUND SIGN):

  foo: bar; title*=iso-8859-1'en'%A3%20rates

Note: the Unicode pound sign character U+00A3 was encoded using ISO-8859-1 into the single octet A3, then percent-encoded. Also note that the space character was encoded as %20, as it is not contained in attr-char.

Extended notation, using the unicode characters U+00A3 (POUND SIGN) and U+20AC (EURO SIGN):

  foo: bar; title*=UTF-8''%c2%a3%20and%20%e2%82%ac%20rates

Note: the unicode pound sign character U+00A3 was encoded using UTF-8 into the octet sequence C2 A3, then percent-encoded. Likewise, the unicode euro sign character U+20AC was encoded into the octet sequence E2 82 AC, then percent-encoded. Also note that HEXDIG allows both lower-case and upper-case character, so recipients must understand both, and that the language information is optional, while the character set is not.



 TOC 

3.3.  Language specification in Encoded Words

Section 5 of [RFC2231] (Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” November 1997.) extends the encoding defined in [RFC2047] (Moore, K., “MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text,” November 1996.) to also support language specification in encoded words. Although the HTTP/1.1 specification does refer to RFC 2047 ([RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), Section 2.2), it's not clear to which header field exactly it applies, and whether it is implemented in practice (see http://tools.ietf.org/wg/httpbis/trac/ticket/111 for details).

Thus, the RFC 2231 profile defined by this specification does not include this feature.



 TOC 

4.  Guidelines for Usage in HTTP Header Field Definitions

Specifications of HTTP header fields that use the extensions defined in Section 3.2 (Parameter Value Character Set and Language Information) should clearly state that. A simple way to achieve this is to normatively reference this specification, and to include the ext-value production into the ABNF for that header field.

For instance:

  foo-header  = "foo" LWSP ":" LWSP token ";" LWSP title-param
  title-param = "title" LWSP "=" LWSP value
              / "title*" LWSP "=" LWSP ext-value
  ext-value   = <see RFCxxxx, Section 3.2>

[rfcno] (Note to RFC Editor: in the figure above, please replace "xxxx" by the RFC number assigned to this specification.)

Note: The Parameter Value Continuation feature defined in Section 3 of [RFC2231] (Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” November 1997.) makes it impossible to have multiple instances of extended parameters with identical parmname components, as the processing of continuations would become ambiguous. Thus, specifications using this extension are recommended to disallow this case for compatibility with RFC 2231.



 TOC 

4.1.  When to Use the Extension

Section 4.2 of [RFC2277] (Alvestrand, H., “IETF Policy on Character Sets and Languages,” January 1998.) requires that protocol elements containing text are able to carry language information. Thus, the ext-value production should always be used when the parameter value is of textual nature and its language is known.

Furthermore, the extension should also be used whenever the parameter value needs to carry characters not present in the US-ASCII ([USASCII] (American National Standards Institute, “Coded Character Set -- 7-bit American Standard Code for Information Interchange,” 1986.)) character set (note that it would be unacceptable to define a new parameter that would be restricted to a subset of the Unicode character set).



 TOC 

4.2.  Error Handling

Header field specifications need to define whether multiple instances of parameters with identical parmname components are allowed, and how they should processed. It is recommended that a parameter using the extended syntax takes precedence. This could be used by producers to use both formats without breaking recipients that do not understand the extended syntax yet.

Example:

  foo: bar; title="EURO exchange rates";
            title*=utf-8''%e2%82%ac%20exchange%20rates

In this case, the sender provides an ASCII version of the title for legacy recipients, but also includes an internationalized version for recipients understanding this specification -- the latter obviously should prefer the new syntax over the old one.

Note: at the time of this writing, many implementations failed to ignore the form they do not understand, or prioritize the ASCII form although the extended syntax was present.



 TOC 

5.  Security Considerations

The format described in this document makes it possible to transport non-ASCII characters, and thus enables character "spoofing" scenarios, in which a displayed value appears to be something other than it is.

Furthermore, there are known attack scenarios relating to decoding UTF-8.

See Section 10 of [RFC3629] (Yergeau, F., “UTF-8, a transformation format of ISO 10646,” November 2003.) for more information on both topics.

In addition, the extension specified in this document makes it possible to transport multiple language variants for a single parameter, and such use might allow spoofing attacks, where different language versions of the same parameter are not equivalent. Whether this attack is useful as an attack depends on the parameter specified.



 TOC 

6.  IANA Considerations

There are no IANA Considerations related to this specification.



 TOC 

7.  Acknowledgements

Thanks to Martin Duerst and Frank Ellermann for help figuring out ABNF details, to Graham Klyne and Alexey Melnikov for general review, Chris Newman for pointing out an RFC 2231 incompatibility, and to Benjamin Carlyle and Roar Lauritzsen for implementer's feedback.



 TOC 

8.  References



 TOC 

8.1. Normative References

[ISO-8859-1] International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” ISO/IEC 8859-1:1998, 1998.
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” RFC 2616, June 1999.
[RFC2978] Freed, N. and J. Postel, “IANA Charset Registration Procedures,” BCP 19, RFC 2978, October 2000.
[RFC3629] Yergeau, F., “UTF-8, a transformation format of ISO 10646,” RFC 3629, STD 63, November 2003.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” RFC 3986, STD 66, January 2005.
[RFC5234] Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” STD 68, RFC 5234, January 2008.
[RFC5646] Phillips, A., Ed. and M. Davis, Ed., “Tags for Identifying Languages,” BCP 47, RFC 5646, September 2009.
[USASCII] American National Standards Institute, “Coded Character Set -- 7-bit American Standard Code for Information Interchange,” ANSI X3.4, 1986.


 TOC 

8.2. Informative References

[RFC2045] Freed, N. and N. Borenstein, “Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies,” RFC 2045, November 1996.
[RFC2047] Moore, K., “MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text,” RFC 2047, November 1996.
[RFC2231] Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” RFC 2231, November 1997.
[RFC2277] Alvestrand, H., “IETF Policy on Character Sets and Languages,” BCP 18, RFC 2277, January 1998.
[RFC2388] Masinter, L., “Returning Values from Forms: multipart/form-data,” RFC 2388, August 1998.


 TOC 

Appendix A.  Document History and Future Plans (to be removed by RFC Editor before publication)

Problems with the internationalization of the HTTP Content-Disposition header field have been known for many years (see test cases at http://greenbytes.de/tech/tc2231/).

During IETF 72 (http://tools.ietf.org/wg/httpbis/minutes?item=minutes72.html), the HTTPbis Working Group shortly discussed how to deal with the underspecification of (1) Content-Disposition, and its (2) internationalization aspects. Back then, there was rough consensus in the room to move the definition into a separate draft.

This specification addresses problem (2), by defining a simple subset of the encoding format defined in RFC 2231. A separate specification, draft-reschke-rfc2183-in-http, is planned to address problem (1). Note that this approach was chosen because Content-Disposition is just an example for an HTTP header field using this kind of encoding. Another example is the currently proposed Link header field (draft-nottingham-http-link-header).

This document is planned to be published on the IETF Standards Track, so that other standards-track level documents can depend on it, such as the new specification of Content-Disposition, or potentially future revisions of the HTTP Link Header specification.

Also note that this document specifies a proper subset of the extensions defined in RFC 2231, but does not normatively refer to it. Thus, RFC 2231 can be revised separately, should the email community decide to.



 TOC 

Appendix B.  Change Log (to be removed by RFC Editor before publication)



 TOC 

B.1.  Since draft-reschke-rfc2231-in-http-00

Use RFC5234-style ABNF, closer to the one used in RFC 2231.

Make RFC 2231 dependency informative, so this specification can evolve independently.

Explain the ABNF in prose.



 TOC 

B.2.  Since draft-reschke-rfc2231-in-http-01

Remove unneeded RFC5137 notation (code point vs character).



 TOC 

B.3.  Since draft-reschke-rfc2231-in-http-02

And and resolve issues "charset", "repeats" and "rfc4646".



 TOC 

B.4.  Since draft-reschke-rfc2231-in-http-03

And and resolve issue "charsetmatch".



 TOC 

B.5.  Since draft-reschke-rfc2231-in-http-04

Add and resolve issues "badseq" and "tokenquotcharset".



 TOC 

B.6.  Since draft-reschke-rfc2231-in-http-05

Say "header field" instead of "header" in the context of HTTP.



 TOC 

B.7.  Since draft-reschke-rfc2231-in-http-06

Add an appendix discussing document history and future plans, to be removed before publication.



 TOC 

B.8.  Since draft-reschke-rfc2231-in-http-07

Add and resolve issues "impl" and "rel-2388".



 TOC 

B.9.  Since draft-reschke-rfc2231-in-http-08

Editorial improvements. Add and resolve issues "attrcharvstoken" and "tokengrammar".



 TOC 

B.10.  Since draft-reschke-rfc2231-in-http-09

Add issues "i18n-spoofing", "iso8859", "parameter-abnf", and "when-ext-value". Add and resolve issues "rfc2978-normative", "rfc3986-normative" and "usascii-normative".



 TOC 

B.11.  Since draft-reschke-rfc2231-in-http-10

Resolve issues "i18n-spoofing", "iso8859", "parameter-abnf", and "when-ext-value".

Add and resolve issue "charset-registered", "handling-multiple", "multiple-inst-spoofing", "repeated-param" and "value-abnf".

Update the KDE implementation note.



 TOC 

Appendix C.  Resolved issues (to be removed by RFC Editor before publication)

Issues that were either rejected or resolved in this version of this document.



 TOC 

C.1.  edit

Type: edit

julian.reschke@greenbytes.de (2009-04-17): Umbrella issue for editorial fixes/enhancements.



 TOC 

C.2.  charset-registered

In Section 3.2:

Type: change

julian.reschke@greenbytes.de (2010-02-20): Mention to use only registered charset names? (reported by Alexey Melnikov).

Resolution (2010-03-29): State this in the ABNF.



 TOC 

C.3.  parameter-abnf

In Section 3.2:

Type: change

julian.reschke@greenbytes.de (2010-02-20): The ABNF for reg-parameter and ext-parameter is ambiguous, as "*" is a valid token character; furthermore, RFC 2616's "attribute" production allows "*" while RFC 2231's does not. (reported by Alexey Melnikov).

julian.reschke@greenbytes.de (2010-02-21): Proposal: restrict the allowable character set in parameter names to exclude "*" (and maybe even more non-name characters?). Also, consider extending the set of value characters (for the right hand side) to allow more characters that can be unambiguously parsed outside quoted strings, such as "/".

Resolution: Introduced parmname, disallowing "*" / "'" / "%". Moving the value ABNF discussion into a separate issue ("value-abnf").



 TOC 

C.4.  value-abnf

In Section 3.2:

Type: change

julian.reschke@greenbytes.de (2010-02-26): Consider extending the right-hand side ABNF - both for regular and extended parameters - to include more characters that can be unambiguously parsed outside quoted strings, such as "/".

Resolution (2010-03-29): No change due to lack of feedback. Potentially defer to future versions of HTTP/1.1 (defining guidelines for header definitions), or a revision of this spec.



 TOC 

C.5.  iso8859

In Section 3.2:

Type: change

julian.reschke@greenbytes.de (2010-02-20): The protocol could be further simplified by mandating UTF-8 only (reported by Alexey Melnikov). On the other hand and not surprinsingly, testing shows that ISO-8859-1 support is widely implemented. The author is looking for community feedback on this choice.

Resolution (2010-03-29): Further feedback was requested during IETF LC; but none was received. Thus defaulting to no change; keeping the support for ISO-8859-1.



 TOC 

C.6.  when-ext-value

In Section 4.1:

Type: change

julian.reschke@greenbytes.de (2010-02-18): There's no point in using ext-value when the language is unknown and no "special" characters are present.

Resolution (2010-02-23): Fixed.



 TOC 

C.7.  repeated-param

In Section 4:

Type: change

Chris.Newman@Sun.COM (2010-03-22): RFC 2231 did not allow two parameters with the same name but different languages, at least in the context of continuations that was impossible. Absent continuations, RFC 2231 was otherwise silent on that topic.
So section 4.3 adds a new feature over and above what RFC 2231 did. It's a feature that will make implementations significantly more complex and is likely to cause interoperability problems.
Much of the experience with deployment of both language tagging and language variants in the IETF seems to result in unnecessary complexity. While there are good abstract arguments for language tagging in theory, it seems more often than not that the parties in the exchange are unable to put anything useful in the field in which case it falls into the realm of unnecessary complexity. In addition, we have experience where we attempted to allow language variants (multipart/alternative) and not only did that usage not deploy, it is actively broken despite being an explicit example in RFC 1766.
The one place where I've seen language variants mostly work is when the language tag is actually included in the attribute name (LDAP does this) and the "search" mechanism allows wildcarding of languages. But having two attributes with the same name seems dangerous.
My recommendation is to remove this feature as I believe it will not be used in practice and will add unnecessary complexity that is likely to create interoperability problems.

Resolution (2010-03-29): State the issue. Remove section 4.3. Rephrase 4.2 accordingly.



 TOC 

C.8.  handling-multiple

In Section 4.2:

Type: change

<http://www.ietf.org/mail-archive/web/apps-discuss/current/msg01344.html>

roessler@gmail.com (2010-02-24): Leaving the choice of precedence to the header specification implies that parsers need to special-case. It would seem reasonable to make a choice in this specification that for properties which can only occur once, the traditional syntax takes precedence.

julian.reschke@greenbytes.de (2010-02-26): That would rule out the use case where the traditional syntax is used as a fallback for clients that do not support the new syntax, as discussed in that section: ... http://greenbytes.de/tech/tc2231/#attfnboth2 is a test case that shows that using this technique, both variants can be served to clients, and those that understand the ext-parameter encoding will indeed pick the "better" parameter. Unfortunately, this appears to depend on parameter ordering, which I didn't want to mention in this spec. Maybe I should?

Resolution (2010-03-29): Just state that when repetitions are not allowed, the extended form should take precedence.



 TOC 

C.9.  i18n-spoofing

In Section 5:

Type: change

<http://www.ietf.org/mail-archive/web/apps-discuss/current/msg01329.html>

GK@ninebynine.org (2010-02-20): I note that the security considerations section says nothing about possible character "spoofing" - i.e. making a displayed prompt or value appear to be something other than it is. E.g. Non-ASCII characters have been used to set up exploits involving dodgy URIs that may appear to a user to be legitimate.

Resolution (2010-02-23): Mention the problem, and point to RFC 3629's security considerations which mention this as well. While at it, also mention the other UTF-8 related attack scenario.



 TOC 

C.10.  multiple-inst-spoofing

In Section 5:

Type: change

kivinen@iki.fi (2010-03-01): Yes, but the impact of them is different. For example it does not really matter if the filename parameters having different languages differ, but there might be parameters where this really matters.
As this document does not define any exact parameters, it might be enough to comment something like that "This document specifies way to transport multiple language variants for parameters, and such use might allow spoofing attacks, where different language versions of the same parameters do not match. Whether this attack is useful as an attack depends on the parameter specified."

Resolution (2010-03-01): Add text based on the recommendation.



 TOC 

Author's Address

  Julian F. Reschke
  greenbytes GmbH
  Hafenweg 16
  Muenster, NW 48155
  Germany
EMail:  julian.reschke@greenbytes.de
URI:  http://greenbytes.de/tech/webdav/