A Framework for SDP Attributes when Multiplexing
draft-nandakumar-mmusic-sdp-mux-attributes-00

Abstract

Communication sessions in RTCWeb are described and negotiated using Session Description Protocol(SDP)[RFC4566] mechanisms. SDP uses attributes to describes specific aspects of such a session. These attributes have different impacts when using varions of multiplexing RTP on a single transport layer flow. The scope of this specification is to provide a framework for analyzing the multiplex characteristics for SDP attributes and provide multiplexing characteristics of existing attributes.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on August 22, 2013.

Copyright Notice

Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 2. Terminology
• 3. Motivation
• 4. SDP Attribute Analysis Framework
• 5. Analysis of Existing Attributes
• 5.1. RFC4566
• 5.2. RFC4585
• 5.3. RFC5761
• 5.4. RFC4574
• 5.5. RFC5432
• 5.6. RFC4568
• 5.7. RFC5762
• 5.8. RFC6773
• 5.9. RFC5506
• 5.10. RFC6787
• 5.11. RFC5245
• 5.12. RFC5285
• 5.13. RFC3605
• 5.14. RFC5576
• 5.15. RFC6236
• 5.16. RFC6285
• 5.17. RFC6230
• 5.18. RFC6364
• 5.19. RFC4796
• 5.20. RFC3407
• 5.21. RFC6284
• 5.22. RFC6714
• 5.23. RFC4583
• 5.24. RFC5547
• 5.25. draft-ietf-mmusic-media-loopback
• 5.26. RFC5760
• 5.27. RFC3611
• 5.28. RFC5939
• 5.29. draft-ietf-mmusic-sdp-media-capabilities
• 5.30. RFC4567
• 5.31. RFC4572
• 5.32. RFC4570
• 5.33. RFC6128
• 5.34. RFC6189
• 5.35. RFC4145
• 5.36. RFC5159
• 5.37. RFC6193
• 5.38. RFC6064
• 5.39. RFC3108
• 5.40. 3GPP TS 24.182
• 5.41. 3GPP TS 24.183
• 5.42. 3GPP TS 24.229
• 5.43. ITU T.38
• 5.44. ITU-T H.248.15
• 5.45. RFC4975
• 5.46. Unknowns
• 6. bwtype Attribute Analysis
• 6.1. RFC4566
• 6.2. RFC3556
• 6.3. RFC3890
• 7. rtcp-fb Attribute Analysis
• 7.1. RFC4585
• 7.2. RFC5104
• 8. rtcp-fb "ack/nack" Attribute Analysis
• 8.1. RFC4585
• 8.2. RFC6285
• 8.3. RFC6679
• 8.4. RFC6642
• 9. Codec Control Messages Analysis
• 9.1. RFC5104
• 10. group Attribute Analysis
• 10.1. RFC5888
• 10.2. RFC3524
• 10.3. RFC4091
• 10.4. RFC5956
• 10.5. RFC5583
• 11. ssrc-group Attribute Analysis
• 11.1. RFC5576
• 12. QoS Mechanism Token Analysis
• 12.1. RFC5432
• 13. k= Attribute Analysis
• 13.1. RFC4566
• 14. content Atribute Analysis
• 14.1. RFC4796
• 15. TRANSPORT Category Example
• 16. IANA Considerations
• 17. Security Considerations
• 18. References
• 18.1. Normative References
• 18.2. Informative References
• Authors' Addresses

1. Introduction

SDP[RFC4566] defines several attributes for describing specific aspects of a multimedia session. Given the number of SDP attributes registered with IANA [IANA]and the defining new attributes in the future, there is need for future-proof framework to analyze these attributes for their applicability in transport multiplexing use-cases. Few proposed schemes for the same are defined in [I-D.ietf-mmusic-sdp-bundle-negotiation] and [I-D.ietf-avt-multiplexing-rtp]

The document starts with providing the motivation for requiring such a framework. This is followed by introduction to the SDP attribute analysis framework/procedures, following which several sections applies the framework to the SDP attributes registered with IANA [IANA]

2. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

3. Motivation

The time and complications of setting up ICE [RFC5245] and DTLS-SRTP [RFC5763] transports for use by RTP, and conservation of ports, forms an requirement to try and reduce the number of transport level flows needed. This has resulted in the definition of ways to multiplex RTP over a single transport flow in order to preserve network resources such as port numbers. This imposes further restrictions on applicability of these SDP attributes as they are defined today.

The specific problem is that there are attribute combinations which make sense when specified on independent m-lines -- as with classical SDP -- that do not make sense when those m-lines are then multiplexed over the same transport. To give an obvious example, ICE permits each m-mline to have an independently specified ice-ufrag attribute. However, if the media from multiple m-lines is multiplexed over the same ICE component, then the meaning of media-level ice-ufrag attributes becomes muddled.

As of today there are close to 180 SDP attributes registered with the IANA [IANA] and more will be added in the future. There is no clearly defined procedure to establish the validity/applicability of these attribute when used with multiplexing.

4. SDP Attribute Analysis Framework

An SDP session description consists of a session-level section followed by zero or more media-level sections that could be broken down into following high-level categories

• Attributes related to media content such as media type, encoding schemes, payload types to name a few.
• Attributes specifying media transport characteristics like RTP/RTCP port, network addresses, QOS and so on.
• Attributes Metadata descriptions such as session timing and origin information.
• Attributes establishing relationships between media streams.

The proposed framework classifies each attribute into one of the following categories:

NORMAL

Attributes that can be independently specified when multiplexing and retain their original semantics .

BAD

Attributes where multiplexing SHOULD NOT be used if these attributes are in use in the SDP.

IDENTICAL

Attributes that MUST be identical across all the media lines being multiplexed.

SUM

Attributes can be set as they are normally used but software using them in a multiplex case, MUST apply the sum of all the attributes being multiplexed instead of trying to use each one. This is typically used for bandwidth or other rate limiting attributes to the underlining transport.

TRANSPORT

Attributes that can be set normally for multiple items in a multiplexed group but the software MUST pick just one of the attribute of the given type for use. The one chosen is the attribute associated with the "m=" lines that represents the information being used for the transport of the RTP. Readers are advised to refer Section TRANSPORT_EXAMPLE [sec-transport] for an illustration of this category.

SPECIAL

Attributes where the text in the draft must be consulted to see how they are handled when multiplexing.

The idea behind these categories is to provide recommendations for using the attributes when multiplexing is being used.

Section 5 analyzes attributes listed in IANA [IANA] grouped under the IETF document that defines them. The "Current" column indicates whether the attribute is currently specified as:

• S -- Session level
• M -- Media level
• B -- Both
• SR -- Source-level (for a single SSRC)

5. Analysis of Existing Attributes

5.1. RFC4566

RFC4566 [RFC4566] defines the Session Description Protocol (SDP) that is intended for describing multimedia sessions for the purposes of session announcement, session invitation, and other forms of multimedia session initiation

5.2. RFC4585

RFC4585 [RFC4585] defines an extension to the Audio-visual Profile (AVP) that enables receivers to provide, statistically, more immediate feedback to the senders and thus allows for short-term adaptation and efficient feedback-based repair mechanisms to be implemented.

5.3. RFC5761

RFC5761 [RFC5761] discusses issues that arise when multiplexing RTP data packets and RTP Control Protocol (RTCP) packets on a single UDP port. It describes when such multiplexing is and is not appropriate, and it explains how the Session Description Protocol (SDP) can be used to signal multiplexed sessions.

5.4. RFC4574

RFC4574 [RFC4574] defines a new Session Description Protocol (SDP) media-level attribute: "label". The "label" attribute carries a pointer to a media stream in the context of an arbitrary network application that uses SDP. The sender of the SDP document can attach the "label" attribute to a particular media stream or streams. The application can then use the provided pointer to refer to each particular media stream in its context.

5.5. RFC5432

RFC5432 [RFC5432] defines prordures to negotiate QOS mechanisms using the Session Description Protocol (SDP) offer/answer model.

5.6. RFC4568

RFC4568 [RFC4568] defines a Session Description Protocol (SDP) cryptographic attribute for unicast media streams. The attribute describes a cryptographic key and other parameters that serve to configure security for a unicast media stream in either a single message or a roundtrip exchange.

Open Isuse: should this be NORMAL

5.7. RFC5762

The Real-time Transport Protocol (RTP) is a widely used transport for real-time multimedia on IP networks. The Datagram Congestion Control Protocol (DCCP) is a transport protocol that provides desirable services for real-time applications. RFC5762 [RFC5762] specifies a mapping of RTP onto DCCP, along with associated signalling, such that real-time applications can make use of the services provided by DCCP

5.8. RFC6773

RFC6773 [RFC6773] document specifies an alternative encapsulation of the Datagram Congestion Control Protocol (DCCP), referred to as DCCP-UDP. This encapsulation allows DCCP to be carried through the current generation of Network Address Translation (NAT) middleboxes without modification of those middleboxes

5.9. RFC5506

RFC5506 [RFC5506] discusses benefits and issues that arise when allowing Real-time Transport Protocol (RTCP) packets to be transmitted with reduced size.

5.10. RFC6787

The Media Resource Control Protocol Version 2 (MRCPv2) allows client hosts to control media service resources such as speech synthesizers, recognizers, verifiers, and identifiers residing in servers on the network. MRCPv2 is not a "stand-alone" protocol -- it relies on other protocols, such as the Session Initiation Protocol (SIP), to coordinate MRCPv2 clients and servers and manage sessions between them, and the Session Description Protocol (SDP) to describe, discover, and exchange capabilities. It also depends on SIP and SDP to establish the media sessions and associated parameters between the media source or sink and the media server. Once this is done, the MRCPv2 exchange operates over the control session established above, allowing the client to control the media processing resources on the speech resource server. RFC6787 [RFC6787] defines attributes for this purpose.

5.11. RFC5245

RFC5245 [RFC5245] describes a protocol for Network Address Translator(NAT) traversal for UDP-based multimedia sessions established with the offer/answer model. This protocol is called Interactive Connectivity Establishment (ICE). ICE makes use of the Session Traversal Utilities for NAT (STUN) protocol and its extension,Traversal Using Relay NAT (TURN). ICE can be used by any protocol utilizing the offer/answer model, such as the Session Initiation Protocol (SIP).

5.12. RFC5285

RFC5285 [RFC5285] provides a general mechanism to use the header extension feature of RTP (the Real-Time Transport Protocol). It provides the option to use a small number of small extensions in each RTP packet, where the universe of possible extensions is large and registration is de-centralized. The actual extensions in use in a session are signaled in the setup information for that session.

5.13. RFC3605

Originally, SDP assumed that RTP and RTCP were carried on consecutive ports. However, this is not always true when NATs are involved. [RFC3605] specifies an early mechanism to indicate the RTCP port.

5.14. RFC5576

RFC5576 [RFC5576] defines a mechanism to describe RTP media sources, which are identified by their synchronization source (SSRC) identifiers, in SDP, to associate attributes with these sources, and to express relationships among sources. It also defines several source-level attributes that can be used to describe properties of media sources.

5.15. RFC6236

RFC6236 [RFC6236] proposes a new generic session setup attribute to make it possible to negotiate different image attributes such as image size. A possible use case is to make it possible for a low-end hand- held terminal to display video without the need to rescale the image, something that may consume large amounts of memory and processing power. The document also helps to maintain an optimal bitrate for video as only the image size that is desired by the receiver is transmitted.

5.16. RFC6285

RFC6285 [RFC6285] describes a method using the existing RTP and RTP Control Protocol (RTCP) machinery that reduces the acquisition delay. In this method, an auxiliary unicast RTP session carrying the Reference Information to the receiver precedes or accompanies the multicast stream. This unicast RTP flow can be transmitted at a faster than natural bitrate to further accelerate the acquisition. The motivating use case for this capability is multicast applications that carry real-time compressed audio and video.

5.17. RFC6230

RFC6230 [RFC6230] describes a framework and protocol for application deployment where the application programming logic and media processing are distributed. This implies that application programming logic can seamlessly gain access to appropriate resources that are not co-located on the same physical network entity. The framework uses the Session Initiation Protocol (SIP) to establish an application-level control mechanism between application servers and associated external servers such as media servers.

5.18. RFC6364

RFC6364 [RFC6364] specifies the use of the Session Description Protocol (SDP) to describe the parameters required to signal the Forward Error Correction (FEC) Framework Configuration Information between the sender(s) and receiver(s). This document also provides examples that show the semantics for grouping multiple source and repair flows together for the applications that simultaneously use multiple instances of the FEC Framework.

5.19. RFC4796

RFC4796 [RFC4796] defines a new Session Description Protocol (SDP) media- level attribute, 'content'. The 'content' attribute defines the content of the media stream to a more detailed level than the media description line. The sender of an SDP session description can attach the 'content' attribute to one or more media streams. The receiving application can then treat each media stream differently (e.g., show it on a big or small screen) based on its content.

5.20. RFC3407

RFC3407 [RFC3407] defines a set of Session Description Protocol (SDP) attributes that enables SDP to provide a minimal and backwards compatible capability declaration mechanism.

5.21. RFC6284

RFC6284 [RFC6284] presents a port mapping solution that allows RTP receivers to choose their own ports for an auxiliary unicast session in RTP applications using both unicast and multicast services. The solution provides protection against denial-of-service or packet amplification attacks that could be used to cause one or more RTP packets to be sent to a victim client

5.22. RFC6714

RFC6714 [RFC6714] defines a Message Session Relay Protocol (MSRP) extension, Connection Establishment for Media Anchoring (CEMA). Support of this extension is OPTIONAL. The extension allows middleboxes to anchor the MSRP connection, without the need for middleboxes to modify the MSRP messages; thus, it also enables secure end-to-end MSRP communication in networks where such middleboxes are deployed. This document also defines a Session Description Protocol (SDP) attribute, 'msrp-cema', that MSRP endpoints use to indicate support of the CEMA extension.

5.23. RFC4583

RFC4583 [RFC4583] document specifies how to describe Binary Floor Control Protocol (BFCP) streams in Session Description Protocol (SDP) descriptions. User agents using the offer/answer model to establish BFCP streams use this format in their offers and answers

5.24. RFC5547

RFC5547 [RFC5547] provides a mechanism to negotiate the transfer of one or more files between two endpoints by using the Session Description Protocol (SDP) offer/answer model specified in [RFC3264].

5.25. draft-ietf-mmusic-media-loopback

[MEDIA_LOOPBACK] adds new SDP media types and attributes, which enable establishment of media sessions where the media is looped back to the transmitter. Such media sessions will serve as monitoring and troubleshooting tools by providing the means for measurement of more advanced VoIP, Real-time Text and Video over IP performance metrics.

5.26. RFC5760

RFC5760 [RFC5760] specifies an extension to the Real-time Transport Control Protocol (RTCP) to use unicast feedback to a multicast sender. The proposed extension is useful for single-source multicast sessions such as Source-Specific Multicast (SSM) communication where the traditional model of many-to-many group communication is either not available or not desired.

5.27. RFC3611

RFC3611 [RFC3611] defines the Extended Report (XR) packet type for the RTP Control Protocol (RTCP), and defines how the use of XR packets can be signaled by an application if it employs the Session Description Protocol (SDP).

5.28. RFC5939

RFC5939 [RFC5939] defines a general SDP Capability Negotiation framework. It also specifies how to provide attributes and transport protocols as capabilities and negotiate them using the framework. Extensions for other types of capabilities (e.g., media types and media formats) may be provided in other documents.

5.29. draft-ietf-mmusic-sdp-media-capabilities

Session Description Protocol (SDP) capability negotiation provides a general framework for indicating and negotiating capabilities in SDP. The base framework defines only capabilities for negotiating transport protocols and attributes. [MEDIA_CAP] extends the framework by defining media capabilities that can be used to negotiate media types and their associated parameters.

5.30. RFC4567

RFC4567 [RFC4567] defines general extensions for Session Description Protocol (SDP) and Real Time Streaming Protocol (RTSP) to carry messages, as specified by a key management protocol, in order to secure the media. These extensions are presented as a framework, to be used by one or more key management protocols. As such, their use is meaningful only when complemented by an appropriate key management protocol.

5.31. RFC4572

RFC4572 [RFC4572] specifies how to establish secure connection-oriented media transport sessions over the Transport Layer Security (TLS) protocol using the Session Description Protocol (SDP). It defines a new SDP protocol identifier, 'TCP/TLS'. It also defines the syntax and semantics for an SDP 'fingerprint' attribute that identifies the certificate that will be presented for the TLS session. This mechanism allows media transport over TLS connections to be established securely, so long as the integrity of session descriptions is assured.

5.32. RFC4570

RFC4570 [RFC4570] describes how to adapt the Session Description Protocol (SDP) to express one or more source addresses as a source filter for one or more destination "connection" addresses. It defines the syntax and semantics for an SDP "source-filter" attribute that may reference either IPv4 or IPv6 address(es) as either an inclusive or exclusive source list for either multicast or unicast destinations. In particular, an inclusive source-filter can be used to specify a Source-Specific Multicast (SSM) session

5.33. RFC6128

The Session Description Protocol (SDP) has an attribute that allows RTP applications to specify an address and a port associated with the RTP Control Protocol (RTCP) traffic. In RTP-based source-specific multicast (SSM) sessions, the same attribute is used to designate the address and the RTCP port of the Feedback Target in the SDP description. However, the RTCP port associated with the SSM session itself cannot be specified by the same attribute to avoid ambiguity, and thus, is required to be derived from the "m=" line of the media description. Deriving the RTCP port from the "m=" line imposes an unnecessary restriction. RFC6128 [RFC6128] removes this restriction by introducing a new SDP attribute.

5.34. RFC6189

RFC6189 [RFC6189] defines ZRTP, a protocol for media path Diffie-Hellman exchange to agree on a session key and parameters for establishing unicast Secure Real-time Transport Protocol (SRTP) sessions for Voice over IP (VoIP) applications.

5.35. RFC4145

RFC4145 [RFC4145] describes how to express media transport over TCP using the Session Description Protocol (SDP). It defines the SDP 'TCP' protocol identifier, the SDP 'setup' attribute, which describes the connection setup procedure, and the SDP 'connection' attribute, which handles connection reestablishment.

5.36. RFC5159

RFC5159 [RFC5159] provides descriptions of Session Description Protocol (SDP) attributes used by the Open Mobile Alliance's Broadcast Service and Content Protection specification.

5.37. RFC6193

RFC6193 [RFC6193] specifies how to establish a media session that represents a virtual private network using the Session Initiation Protocol for the purpose of on-demand media/application sharing between peers. It extends the protocol identifier of the Session Description Protocol (SDP) so that it can negotiate use of the Internet Key Exchange Protocol (IKE) for media sessions in the SDP offer/answer model.

In the case of session multiplexed with multiple m=lines, this SHOULD create only one IPSEC association for all the m=lines.

5.38. RFC6064

The Packet-switched Streaming Service (PSS) and the Multimedia Broadcast/Multicast Service (MBMS) defined by 3GPP use the Session Description Protocol (SDP) and Real Time Streaming Protocol (RTSP) with some extensions. RFC6064 [RFC6064] provides information about these extensions and registers the RTSP and SDP extensions with IANA.

5.39. RFC3108

RFC3108 [RFC3108] describes conventions for using the Session Description Protocol (SDP) described for controlling ATM Bearer Connections, and any associated ATM Adaptation Layer (AAL)

5.40. 3GPP TS 24.182

3GPP TS 24.182 [3GPP TS 24.182] specifies IP multimedia subsystem Custom Alerting tones

5.41. 3GPP TS 24.183

3GPP TS 24.183 [3GPP TS 24.183]specifies IP multimedia subsystem Custom Ringing Signal

5.42. 3GPP TS 24.229

3GPP TS 24.229 [3GPP TS 24.229]IP multimedia call control protocol based on Session Initial protocol and Session Description Protocol.

5.43. ITU T.38

ITU T.38[T.38] defines procedures for real-time Group 3 fascimile communications over IP netowrks.

5.44. ITU-T H.248.15

ITU-T H.248.15 [H.248.15] defines Gateway Control Protocol SDP H.248 package attribute

5.45. RFC4975

RFC4975 [RFC4975] the Message Session Relay Protocol, a protocol for transmitting a series of related instant messages in the context of a session. Message sessions are treated like any other media stream when set up via a rendezvous or session creation protocol such as the Session Initiation Protocol.

5.46. Unknowns

This section specifies analysis for the attributes that are included for historic usage alone by the [IANA_REF]

6. bwtype Attribute Analysis

This section specifies handling of specific bandwidth attributes when used in multiplexing scenarios.

6.1. RFC4566

6.2. RFC3556

RFC3556 [RFC3556] defines an extension to the Session Description Protocol (SDP) to specify two additional modifiers for the bandwidth attribute. These modifiers may be used to specify the bandwidth allowed for RTP Control Protocol (RTCP) packets in a Real-time Transport Protocol (RTP) session

6.3. RFC3890

RFC3890 [RFC3890] defines a Session Description Protocol (SDP) Transport Independent Application Specific Maximum (TIAS) bandwidth modifier that does not include transport overhead; instead an additional packet rate attribute is defined. The transport independent bit-rate value together with the maximum packet rate can then be used to calculate the real bit-rate over the transport actually used.

7. rtcp-fb Attribute Analysis

This section analyzes rtcp-fb SDP attributes [RTCP-FB].

7.1. RFC4585

RFC4585 [RFC4585] defines an extension to the Audio-visual Profile (AVP) that enables receivers to provide, statistically, more immediate feedback to the senders and thus allows for short-term adaptation and efficient feedback-based repair mechanisms to be implemented.

7.2. RFC5104

RFC5104 [RFC5104] specifies a few extensions to the messages defined in the Audio-Visual Profile with Feedback (AVPF). They are helpful primarily in conversational multimedia scenarios where centralized multipoint functionalities are in use. However, some are also usable in smaller multicast environments and point-to-point calls.

8. rtcp-fb "ack/nack" Attribute Analysis

This section analyzes rtcp-fb SDP attributes specific to ack and nack feedback types [ACK-NACK].

8.1. RFC4585

RFC4585 [RFC4585] defines an extension to the Audio-visual Profile (AVP) that enables receivers to provide, statistically, more immediate feedback to the senders and thus allows for short-term adaptation and efficient feedback-based repair mechanisms to be implemented.

8.2. RFC6285

8.3. RFC6679

RFC6679 [RFC6679] specifies how Explicit Congestion Notification (ECN) can be used with the Real-time Transport Protocol (RTP) running over UDP, using the RTP Control Protocol (RTCP) as a feedback mechanism. It defines a new RTCP Extended Report (XR) block for periodic ECN feedback, a new RTCP transport feedback message for timely reporting of congestion events, and a Session Traversal Utilities for NAT (STUN) extension used in the optional initialisation method using Interactive Connectivity Establishment (ICE)

8.4. RFC6642

In a large RTP session using the RTP Control Protocol (RTCP) feedback mechanism defined in RFC 4585 [RFC4585], a feedback target may experience transient overload if some event causes a large number of receivers to send feedback at once. This overload is usually avoided by ensuring that feedback reports are forwarded to all receivers, allowing them to avoid sending duplicate feedback reports. However, there are cases where it is not recommended to forward feedback reports, and this may allow feedback implosion. RFC6642 [RFC6642] memo discusses these cases and defines a new RTCP Third-Party Loss Report that can be used to inform receivers that the feedback target is aware of some loss event, allowing them to suppress feedback. Associated Session Description Protocol (SDP) signaling is also defined.

9. Codec Control Messages Analysis

This section analyzes rtcp-fb Codec Control Message [CCM].

9.1. RFC5104

10. group Attribute Analysis

This section analyzes SDP "group" semantics [GROUP-SEM].

10.1. RFC5888

RFC5888 [RFC5888] defines a framework to group "m" lines in the Session Description Protocol (SDP) for different purposes.

10.2. RFC3524

RFC3524 [RFC3524] defines an extension to the Session Description Protocol (SDP) grouping framework. It allows requesting a group of media streams to be mapped into a single resource reservation flow. The SDP syntax needed is defined, as well as a new "semantics" attribute called Single Reservation Flow (SRF).

10.3. RFC4091

RFC4091 [RFC4091] defines the Alternative Network Address Types (ANAT) semantics for the Session Description Protocol (SDP) grouping framework. The ANAT semantics allow alternative types of network addresses to establish a particular media stream.

10.4. RFC5956

RFC5956 [RFC5956] defines the semantics for grouping the associated source and FEC-based (Forward Error Correction) repair flows in the Session Description Protocol (SDP). The semantics defined in the document are to be used with the SDP Grouping Framework (RFC 5888). These semantics allow the description of grouping relationships between the source and repair flows when one or more source and/or repair flows are associated in the same group, and they provide support for additive repair flows. SSRC-level (Synchronization Source) grouping semantics are also defined in this document for Real-time Transport Protocol (RTP) streams using SSRC multiplexing.

10.5. RFC5583

RFC5583 [RFC5583] defines semantics that allow for signaling the decoding dependency of different media descriptions with the same media type in the Session Description Protocol (SDP). This is required, for example, if media data is separated and transported in different network streams as a result of the use of a layered or multiple descriptive media coding process.

11. ssrc-group Attribute Analysis

This section analyzes "ssrc-group" semantics [SSRC-GROUP].

11.1. RFC5576

12. QoS Mechanism Token Analysis

This section analyzes QoS tokes specified with SDP[QOS].

12.1. RFC5432

13. k= Attribute Analysis

13.1. RFC4566

14. content Atribute Analysis

14.1. RFC4796

15. TRANSPORT Category Example

The example below explains the usage of "TRANSPORT" category for RFC4586 "crypto" parameter when SDP Port number based multiplexing is performed for audio and video streams.

     v=0
     o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com
     s=
     c=IN IP4 host.atlanta.example.com
     t=0 0
     a=group:BUNDLE second,first
     m=audio 49172 RTP/AVP 99
     a=mid:one
     a=crypto:1 AES_CM_128_HMAC_SHA1_80
       inline:d0RmdmcmVCspeEc3QGZiNWpVLFJhQX1cfHAwJSoj|2^20|1:32
     a=rtpmap:99 iLBC/8000
     m=video 51374 RTP/AVP 31
     a=mid:two
     a=crypto:1 AES_CM_128_HMAC_SHA1_80
       inline:EcGZiNWpFJhQXdspcl1ekcmVCNWpVLcfHAwJSoj|2^20|1:32
     a=rtpmap:96 H261/90000    

In this example, "a=crypto" attribute is defined for both the audio and the video m=lines.The one that MUST be used for the multiplexed RTP Session is the one that corresponds to m=line with mid "two" even though the audio m=line with mid "one" occurs ahead of it. This is due to BUNDLE grouping semantics [I-D.ietf-mmusic-sdp-bundle-negotiation] which mandates the values from mid occuring first on the a=group:BUNDLE line to be considered for seting up the RTP Transport.

16. IANA Considerations

TBD

Future versions of this specification will ask the IANA to expand to attribute tables to include an extra column specifying categories from this draft.

17. Security Considerations

All the attributes which involve security key needs a careful review to ensure two-time pad vulnerability is not created

18. References

18.1. Normative References

18.2. Informative References

Authors' Addresses