Network Working Group I. Nadareishvili Internet-Draft October 14, 2018 Intended status: Informational Expires: April 17, 2019 Health Check Response Format for HTTP APIs draft-inadarei-api-health-check-02 Abstract This document proposes a service health check response format for HTTP APIs. Note to Readers *RFC EDITOR: please remove this section before publication* The issues list for this draft can be found at https://github.com/inadarei/rfc-healthcheck/issues [1]. The most recent draft is at https://inadarei.github.io/rfc- healthcheck/ [2]. Recent changes are listed at https://github.com/inadarei/rfc- healthcheck/commits/master [3]. See also the draft's current status in the IETF datatracker, at https://datatracker.ietf.org/doc/draft-inadarei-api-health-check/ [4]. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on April 17, 2019. Nadareishvili Expires April 17, 2019 [Page 1] Internet-Draft Health Check Response Format for HTTP APIs October 2018 Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Notational Conventions . . . . . . . . . . . . . . . . . . . 3 3. API Health Response . . . . . . . . . . . . . . . . . . . . . 4 3.1. status . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.2. version . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.3. releaseId . . . . . . . . . . . . . . . . . . . . . . . . 5 3.4. notes . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.5. output . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.6. details . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.7. links . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.8. serviceId . . . . . . . . . . . . . . . . . . . . . . . . 5 3.9. description . . . . . . . . . . . . . . . . . . . . . . . 5 4. The Details Object . . . . . . . . . . . . . . . . . . . . . 6 4.1. componentId . . . . . . . . . . . . . . . . . . . . . . . 7 4.2. componentType . . . . . . . . . . . . . . . . . . . . . . 7 4.3. observedValue . . . . . . . . . . . . . . . . . . . . . . 7 4.4. observedUnit . . . . . . . . . . . . . . . . . . . . . . 7 4.5. status . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.6. time . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.7. output . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.8. links . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5. Example Output . . . . . . . . . . . . . . . . . . . . . . . 8 6. Security Considerations . . . . . . . . . . . . . . . . . . . 10 7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 11 8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 12 9. Creating and Serving Health Responses . . . . . . . . . . . . 12 10. Consuming Health Check Responses . . . . . . . . . . . . . . 13 11. References . . . . . . . . . . . . . . . . . . . . . . . . . 13 11.1. Normative References . . . . . . . . . . . . . . . . . . 13 11.2. Informative References . . . . . . . . . . . . . . . . . 14 11.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Nadareishvili Expires April 17, 2019 [Page 2] Internet-Draft Health Check Response Format for HTTP APIs October 2018 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 14 1. Introduction The vast majority of modern APIs driving data to web and mobile applications use HTTP [RFC7230] as their protocol. The health and uptime of these APIs determine availability of the applications themselves. In distributed systems built with a number of APIs, understanding the health status of the APIs and making corresponding decisions, for caching, failover or circuit-breaking, are essential to the ability of providing highly-available solutions. There exists a wide variety of operational software that relies on the ability to read health check response of APIs. However, there is currently no standard for the health check output response, so most applications either rely on the basic level of information included in HTTP status codes [RFC7231] or use task-specific formats. Usage of task-specific or application-specific formats creates significant challenges, disallowing any meaningful interoperability across different implementations and between different tooling. Standardizing a format for health checks can provide any of a number of benefits, including: o Flexible deployment - since operational tooling and API clients can rely on rich, uniform format, they can be safely combined and substituted as needed. o Evolvability - new APIs, conforming to the standard, can safely be introduced in any environment and ecosystem that also conforms to the same standard, without costly coordination and testing requirements. This document defines a "health check" format using the JSON format [RFC8259] for APIs to use as a standard point for the health information they offer. Having a well-defined format for this purpose promotes good practice and tooling. 2. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. Nadareishvili Expires April 17, 2019 [Page 3] Internet-Draft Health Check Response Format for HTTP APIs October 2018 3. API Health Response Health Check Response Format for HTTP APIs uses the JSON format described in [RFC8259] and has the media type "application/ health+json". Its content consists of a single mandatory root field ("status") and several optional fields: 3.1. status status: (required) indicates whether the service status is acceptable or not. API publishers SHOULD use following values for the field: o "pass": healthy (acceptable aliases: "ok" to support Node's Terminius and "up" for Java's SpringBoot), o "fail": unhealthy (acceptable aliases: "error" to support Node's Terminius and "down" for Java's SpringBoot), and o "warn": healthy, with some concerns. The value of the status field is case-insensitive and is tightly related with the HTTP response code returned by the health endpoint. For "pass" and "warn" statuses, HTTP response code in the 2xx-3xx range MUST be used. For "fail" status, HTTP response code in the 4xx-5xx range MUST be used. In case of the "warn" status, endpoints SHOULD return HTTP status in the 2xx-3xx range, and additional information SHOULD be provided, utilizing optional fields of the response. A health endpoint is only meaningful in the context of the component it indicates the health of. It has no other meaning or purpose. As such, its health is a conduit to the health of the component. Clients SHOULD assume that the HTTP response code returned by the health endpoint is applicable to the entire component (e.g. a larger API or a microservice). This is compatible with the behavior that current infrastructural tooling expects: load-balancers, service discoveries and others, utilizing health-checks. 3.2. version version: (optional) public version of the service. Nadareishvili Expires April 17, 2019 [Page 4] Internet-Draft Health Check Response Format for HTTP APIs October 2018 3.3. releaseId releaseId: (optional) in well-designed APIs, backwards-compatible changes in the service should not update a version number. APIs usually change their version number as infrequently as possible, to preserve stable interface. However implementation of an API may change much more frequently, which leads to the importance of having separate "release number" or "releaseID" that is different from the public version of the API. 3.4. notes notes: (optional) array of notes relevant to current state of health 3.5. output output: (optional) raw error output, in case of "fail" or "warn" states. This field SHOULD be omitted for "pass" state. 3.6. details details (optional) is an object that provides more details about the status of the service as it pertains to the information about the downstream dependencies of the service in question. Please refer to the "The Details Object" section for more information. 3.7. links links (optional) is an array of objects containing link relations and URIs [RFC3986] for external links that MAY contain more information about the health of the endpoint. Per web-linking standards [RFC8288] a link relationship SHOULD either be a common/registered one or be indicated as a URI, to avoid name clashes. If a "self" link is provided, it MAY be used by clients to check health via HTTP response code, as mentioned above. 3.8. serviceId serviceId (optional) is a unique identifier of the service, in the application scope. 3.9. description description (optional) is a human-friendly description of the service. Nadareishvili Expires April 17, 2019 [Page 5] Internet-Draft Health Check Response Format for HTTP APIs October 2018 4. The Details Object The "details" object MAY have a number of unique keyes, one for each logical downstream dependencies or sub-components. Since each sub- component may be backed by several nodes with varying health statuses, these keys point to arrays of objects. In case of a single-node sub-component (or if presence of nodes is not relevant), a single-element array should be used as the value, for consistency. The key identifying an element in the object should be a unique string within the details section. It MAY have two parts: "{componentName}:{measurementName}", in which case the meaning of the parts SHOULD be as follows: o componentName: (optional) human-readable name for the component. MUST not contain a colon, in the name, since colon is used as a separator. o measurementName: (optional) name of the measurement type (a data point type) that the status is reported for. MUST not contain a colon, in the name, since colon is used as a separator. The observation's name can be one of: * A pre-defined value from this spec. Pre-defined values include: + utilization + responseTime + connections + uptime * A common and standard term from a well-known source such as schema.org, IANA or microformats. * A URI that indicates extra semantics and processing rules that MAY be provided by a resource at the other end of the URI. URIs do not have to be dereferenceable, however. They are just a namespace, and the meaning of a namespace CAN be provided by any convenient means (e.g. publishing an RFC, Swagger document or a nicely printed book). On the value side of the equation, each "component details" object in the array MAY have one of the following object keys: Nadareishvili Expires April 17, 2019 [Page 6] Internet-Draft Health Check Response Format for HTTP APIs October 2018 4.1. componentId componentId: (optional) is a unique identifier of an instance of a specific sub-component/dependency of a service. Multiple objects with the same componentID MAY appear in the details, if they are from different nodes. 4.2. componentType componentType: (optional) SHOULD be present if componentName is present. It's a type of the component and could be one of: o Pre-defined value from this spec. Pre-defined values include: * component * datastore * system o A common and standard term from a well-known source such as schema.org, IANA or microformats. o A URI that indicates extra semantics and processing rules that MAY be provided by a resource at the other end of the URI. URIs do not have to be dereferenceable, however. They are just a namespace, and the meaning of a namespace CAN be provided by any convenient means (e.g. publishing an RFC, Swagger document or a nicely printed book). 4.3. observedValue observedValue: (optional) could be any valid JSON value, such as: string, number, object, array or literal. 4.4. observedUnit observedUnit (optional) SHOULD be present if observedValue is present. Calrifies the unit of measurement in which observedUnit is reported, e.g. for a time-based value it is important to know whether the time is reported in seconds, minutes, hours or something else. To make sure unit is denoted by a well-understood name or an abbreviation, it should be one of: o A common and standard term from a well-known source such as schema.org, IANA, microformats, or a standards document such as [RFC3339]. Nadareishvili Expires April 17, 2019 [Page 7] Internet-Draft Health Check Response Format for HTTP APIs October 2018 o A URI that indicates extra semantics and processing rules that MAY be provided by a resource at the other end of the URI. URIs do not have to be dereferenceable, however. They are just a namespace, and the meaning of a namespace CAN be provided by any convenient means (e.g. publishing an RFC, Swagger document or a nicely printed book). 4.5. status status (optional) has the exact same meaning as the top-level "output" element, but for the sub-component/downstream dependency represented by the details object. 4.6. time time (optional) is the date-time, in ISO8601 format, at which the reading of the observedValue was recorded. This assumes that the value can be cached and the reading typically doesn't happen in real time, for performance and scalability purposes. 4.7. output output (optional) has the exact same meaning as the top-level "output" element, but for the sub-component/downstream dependency represented by the details object. 4.8. links links (optional) has the exact same meaning as the top-level "output" element, but for the sub-component/downstream dependency represented by the details object. 5. Example Output GET /health HTTP/1.1 Host: example.org Accept: application/health+json HTTP/1.1 200 OK Content-Type: application/health+json Cache-Control: max-age=3600 Connection: close { "status": "pass", "version": "1", "releaseID": "1.2.2", "notes": [""], Nadareishvili Expires April 17, 2019 [Page 8] Internet-Draft Health Check Response Format for HTTP APIs October 2018 "output": "", "serviceID": "f03e522f-1f44-4062-9b55-9587f91c9c41", "description": "health of authz service", "details": { "cassandra:responseTime": [ { "componentId": "dfd6cf2b-1b6e-4412-a0b8-f6f7797a60d2", "componentType": "datastore", "observedValue": 250, "observedUnit": "ms", "status": "pass", "time": "2018-01-17T03:36:48Z", "output": "" } ], "cassandra:connections": [ { "componentId": "dfd6cf2b-1b6e-4412-a0b8-f6f7797a60d2", "type": "datastore", "observedValue": 75, "status": "warn", "time": "2018-01-17T03:36:48Z", "output": "", "links": { "self": "http://api.example.com/dbnode/dfd6cf2b/health" } } ], "uptime": [ { "componentType": "system", "observedValue": 1209600.245, "observedUnit": "s", "status": "pass", "time": "2018-01-17T03:36:48Z" } ], "cpu:utilization": [ { "componentId": "6fd416e0-8920-410f-9c7b-c479000f7227", "node": 1, "componentType": "system", "observedValue": 85, "observedUnit": "percent", "status": "warn", "time": "2018-01-17T03:36:48Z", "output": "" }, Nadareishvili Expires April 17, 2019 [Page 9] Internet-Draft Health Check Response Format for HTTP APIs October 2018 { "componentId": "6fd416e0-8920-410f-9c7b-c479000f7227", "node": 2, "componentType": "system", "observedValue": 85, "observedUnit": "percent", "status": "warn", "time": "2018-01-17T03:36:48Z", "output": "" } ], "memory:utilization": [ { "componentId": "6fd416e0-8920-410f-9c7b-c479000f7227", "node": 1, "componentType": "system", "observedValue": 8.5, "observedUnit": "GiB", "status": "warn", "time": "2018-01-17T03:36:48Z", "output": "" }, { "componentId": "6fd416e0-8920-410f-9c7b-c479000f7227", "node": 2, "componentType": "system", "observedValue": 5500, "observedUnit": "MiB", "status": "pass", "time": "2018-01-17T03:36:48Z", "output": "" } ] }, "links": { "about": "http://api.example.com/about/authz", "http://api.x.io/rel/thresholds": "http://api.x.io/about/authz/thresholds" } } 6. Security Considerations Clients need to exercise care when reporting health information. Malicious actors could use this information for orchestrating attacks. In some cases the health check endpoints may need to be authenticated and institute role-based access control. Nadareishvili Expires April 17, 2019 [Page 10] Internet-Draft Health Check Response Format for HTTP APIs October 2018 7. IANA Considerations The media type for health check response is application/health+json. o Media type name: application o Media subtype name: health+json o Required parameters: n/a o Optional parameters: n/a o Encoding considerations: binary o Security considerations: Health+JSON shares security issues common to all JSON content types. See RFC 8259 Section #12 for additional information. Health+JSON allows utilization of Uniform Resource Identifiers (URIs) and as such shares security issues common to URI usage. See RFC 3986 Section #7 for additional information. Since health+json can carry wide variety of data, some data may require privacy or integrity services. This specification does not prescribe any specific solution and assumes that concrete implementations will utilize common, trusted approaches such as TLS/HTTPS, OAuth2 etc. o Interoperability considerations: None o Published specification: this RFC draft o Applications which use this media: Various o Fragment identifier considerations: Health+JSON follows RFC6901 for implementing URI Fragment Identification standard to JSON content types. o Restrictions on usage: None o Additional information: 1. Deprecated alias names for this type: n/a 2. Magic number(s): n/a 3. File extension(s): .json Nadareishvili Expires April 17, 2019 [Page 11] Internet-Draft Health Check Response Format for HTTP APIs October 2018 4. Macintosh file type code: TEXT 5. Object Identifiers: n/a o General Comments: o Person to contact for further information: 1. Name: Irakli Nadareishvili 2. Email: irakli@gmail.com o Intended usage: Common o Author/Change controller: Irakli Nadareishvili 8. Acknowledgements Thanks to Mike Amundsen, Erik Wilde, Justin Bachorik and Randall Randall for their suggestions and feedback. And to Mark Nottingham for blueprint for authoring RFCs easily. 9. Creating and Serving Health Responses When making an health check endpoint available, there are a few things to keep in mind: o A health response endpoint is best located at a memorable and commonly-used URI, such as "health" because it will help self- discoverability by clients. o Health check responses can be personalized. For example, you could advertise different URIs, and/or different kinds of link relations, to afford different clients access to additional health check information. o Health check responses SHOULD be assigned a freshness lifetime (e.g., "Cache-Control: max-age=3600") so that clients can determine how long they could cache them, to avoid overly frequent fetching and unintended DDOS-ing of the service. Any method of cach lifetime negotiation provided by HTTP spec is acceptable (e.g. ETags are just fine). o Custom link relation types, as well as the URIs for variables, should lead to documentation for those constructs. Nadareishvili Expires April 17, 2019 [Page 12] Internet-Draft Health Check Response Format for HTTP APIs October 2018 10. Consuming Health Check Responses Clients might use health check responses in a variety of ways. Note that the health check response is a "living" document; links from the health check response MUST NOT be assumed to be valid beyond the freshness lifetime of the health check response, as per HTTP's caching model [RFC7234]. As a result, clients ought to cache the health check response (as per [RFC7234]), to avoid fetching it before every interaction (which would otherwise be required). Likewise, a client encountering a 404 (Not Found) on a link is encouraged to obtain a fresh copy of the health check response, to assure that it is up-to-date. 11. References 11.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [RFC7234] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Caching", RFC 7234, DOI 10.17487/RFC7234, June 2014, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [RFC8288] Nottingham, M., "Web Linking", RFC 8288, DOI 10.17487/RFC8288, October 2017, . Nadareishvili Expires April 17, 2019 [Page 13] Internet-Draft Health Check Response Format for HTTP APIs October 2018 11.2. Informative References [RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002, . [RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, DOI 10.17487/RFC6838, January 2013, . [RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing", RFC 7230, DOI 10.17487/RFC7230, June 2014, . [RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content", RFC 7231, DOI 10.17487/RFC7231, June 2014, . 11.3. URIs [1] https://github.com/inadarei/rfc-healthcheck/issues [2] https://inadarei.github.io/rfc-healthcheck/ [3] https://github.com/inadarei/rfc-healthcheck/commits/master [4] https://datatracker.ietf.org/doc/draft-inadarei-api-health-check/ Author's Address Irakli Nadareishvili 114 5th Avenue New York United States Email: irakli@gmail.com URI: http://www.freshblurbs.com Nadareishvili Expires April 17, 2019 [Page 14]