TOC 
Network Working GroupK. Igoe
Internet-DraftNational Security Agency
Intended status: Standards TrackD. Stebila
Expires: February 13, 2011Queensland University of Technology
 August 12, 2010


X.509v3 Certificates for Secure Shell Authentication
draft-igoe-secsh-x509v3-05

Abstract

X.509 public key certificates use a signature by a trusted certification authority to bind a given public key to a given digital identity. This document specifies how to use X.509 version 3 public key certificates in public key algorithms in the Secure Shell protocol.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on February 13, 2011.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
2.  Public Key Algorithms Using X.509 Version 3 Certificates
    2.1.  Public Key Format
    2.2.  Certificate Extensions
        2.2.1.  KeyUsage
        2.2.2.  ExtendedKeyUsage
3.  Signature Encoding
    3.1.  x509v3-ssh-dss
    3.2.  x509v3-ssh-rsa
    3.3.  x509v3-rsa2048-sha256
    3.4.  x509v3-ecdsa-sha2-*
4.  Use in public key algorithms
5.  Security Considerations
6.  IANA Considerations
7.  References
    7.1.  Normative References
    7.2.  Informative References
Appendix A.  Example
Appendix B.  Acknowledgements
§  Authors' Addresses




 TOC 

1.  Introduction

There are two Secure Shell (SSH) protocols that use public key cryptography for authentication. The Transport Layer Protocol, described in [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.), requires that a digital signature algorithm (called the "public key algorithm") MUST be used to authenticate the server to the client. Additionally, the User Authentication Protocol described in [RFC4252] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Authentication Protocol,” January 2006.) allows for the use of a digital signature to authenticate the client to the server ("publickey" authentication).

In both cases, the validity of the authentication depends upon the strength of the linkage between the public signing key and the identity of the signer. Digital certificates, such as those in X.509 version 3 (X.509v3) format, are used in many corporate and government environments to provide identity management. They use a chain of signatures by a trusted root certification authority and its intermediate certificate authorites to bind a given public signing key to a given digital identity.

The following public key authentication algorithms are currently available for use in SSH:

AlgorithmReference
ssh-dss [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.)
ssh-rsa [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.)
pgp-sign-dss [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.)
pgp-sign-rsa [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.)
ecdsa-sha2-* [RFC5656] (Stebila, D. and J. Green, “Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer,” December 2009.)

Since PGP has its own method for binding a public key to a digital identity, this document focuses solely upon the non-PGP methods. In particular, this document defines the following public key algorithms which differ from the above solely in their use of X.509v3 certificates to convey the signer's public key.

Algorithm
x509v3-ssh-dss
x509v3-ssh-rsa
x509v3-rsa2048-sha256
x509v3-ecdsa-sha2-*

Public keys conveyed using the x509v3-ecdsa-sha2-* public key algorithm can be used with the ecmqv-sha2 key exchange method.

Implementation of this specification requires familiarity with the Secure Shell protocol [RFC4251] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Protocol Architecture,” January 2006.) [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.) and X.509v3 certificates [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.).

This document is concerned with SSH implementation details; specification of the underlying cryptographic algorithms and the handling and structure of X.509v3 certificates is left to other standards documents.

An earlier Internet-Draft for the use of X.509v3 certificates in the Secure Shell was proposed by O. Saarenmaa and J. Galbraith; while this document is informed in part by that Internet-Draft, it does not maintain strict compatibility. (NOTE TO RFC EDITOR: This paragraph should not appear in the final RFC. A note about the previous I-D also appears in the Acknowledgements.)

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).



 TOC 

2.  Public Key Algorithms Using X.509 Version 3 Certificates

This document defines the following new public key algorithms for use in the Secure Shell protocol: x509v3-ssh-dss, x509v3-ssh-rsa, x509v3-rsa2048-sha256, and the family of algorithms given by x509v3-ecdsa-sha2-*. In these algorithms, a public key is stored in an X.509v3 certificate. This certificate, a chain of certificates leading to a trusted certificate authority, and optional messages giving the revocation status of the certificates are sent as the public key data in the Secure Shell protocol according to the format in this section.



 TOC 

2.1.  Public Key Format

The reader is referred to [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) for a general description of X.509 version 3 certificates. For the purposes of this document, it suffices to know that in X.509 a chain or sequence of certificates (possibly of length one) allows a trusted root certificate authority and its intermediate certificate authorities to cryptographically bind a given public key to a given digital identity using public key signatures.

For all of the public key algorithms specified in this document, the key format consists of a sequence of one or more X.509v3 certificates followed by a sequence of 0 or more Online Certificate Status Protocol (OCSP) responses as in Section 4.2 of [RFC2560] (Myers, M., Ankney, R., Malpani, A., Galperin, S., and C. Adams, “X.509 Internet Public Key Infrastructure Online Certificate Status Protocol - OCSP,” June 1999.). Providing OCSP responses directly in this data structure can reduce the number of communication rounds required (saving the implementation from needing to perform OCSP checking out-of-band) and can also allow a client outside of a private network to receive OCSP responses from a server behind firewall. As with any use of OCSP data, implementations SHOULD check that the production time of the OCSP response is acceptable. It is RECOMMENDED, but not REQUIRED, that implementations reject certificates for which the certificate status is revoked.

The key format has the following specific encoding:

  string  "x509v3-ssh-dss" / "x509v3-ssh-rsa" / "x509v3-rsa2048-sha256" /
          "x509v3-ecdsa-sha2-*"
  uint32  certificate-count
  string  certificate[1..certificate-count]
  uint32  ocsp-response-count
  string  ocsp-response[0..ocsp-response-count]

Each certificate and ocsp-response MUST be encoded as a string of octets using the DER encoding of Abstract Syntax Notation One (ASN.1) [ASN1] (International Telecommunications Union, “Abstract Syntax Notation One (ASN.1): Specification of basic notation,” July 2002.). An example of an SSH key exchange involving one of these public key algorithms is given in Appendix A (Example).

Additionally, the following constraints apply:

Upon receipt of a certificate chain, implementations MUST verify the certificate chain according to Section 6.1 of [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) based on a root of trust configured by the system administrator or user.

Issues associated with the use of certificates (such as expiration of certificates and revocation of compromised certificates) are addressed in [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) and are outside the scope of this document. However, compliant implementations MUST comply with [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.). Implementations providing and processing OCSP responses MUST comply with [RFC2560] (Myers, M., Ankney, R., Malpani, A., Galperin, S., and C. Adams, “X.509 Internet Public Key Infrastructure Online Certificate Status Protocol - OCSP,” June 1999.).

When no OCSP responses are provided, it is up to the implementation and system administrator to decide whether to accept the certificate or not. It may be possible for the implementation to retrieve OCSP responses based on the id-ad-ocsp access description in the certificate's Authority Information Access data (Section 4.2.2.1 of [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.)). However, if the id-ad-ocsp access description indicates that the certificate authority employs OCSP, and no OCSP response information is available, it is RECOMMENDED that the certificate be rejected.

[RFC5480] (Turner, S., Brown, D., Yiu, K., Housley, R., and T. Polk, “Elliptic Curve Cryptography Subject Public Key Information,” March 2009.) and [RFC5758] (Dang, Q., Santesson, S., Moriarty, K., Brown, D., and T. Polk, “Internet X.509 Public Key Infrastructure: Additional Algorithms and Identifiers for DSA and ECDSA,” January 2010.) describes the structure of X.509v3 certificates to be used with ECDSA public keys. [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) describes the structure of X.509v3 certificates to be used with RSA and DSA public keys. [RFC5759] (Solinas, J. and L. Zieglar, “Suite B Certificate and Certificate Revocation List (CRL) Profile,” January 2010.) provides additional guidance for ECDSA keys in Suite B X.509v3 certificate and certificate revocation list profiles.



 TOC 

2.2.  Certificate Extensions

Certificate extensions allow for the specification of additional attributes associated with a public key in an X.509v3 certificate (see Section 4.2 of [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.)). The KeyUsage and ExtendedKeyUsage extensions may be used to restrict the use of X.509v3 certificates in the context of the Secure Shell protocol as specified in the following sections.



 TOC 

2.2.1.  KeyUsage

The KeyUsage extension MAY be used to restrict a certificate's use. In accordance with Section 4.2.1.3 of [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.), if the KeyUsage extension is present, then the certificate MUST be used only for one of the purposes indicated. There are two relevant keyUsage identifiers for the certificate corresponding to the public key algorithm in use:

For the remaining certificates in the certificate chain, implementations MUST comply with existing conventions on KeyUsage identifiers and certificates as in Section 4.2.1.3 on [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.).



 TOC 

2.2.2.  ExtendedKeyUsage

This document defines two ExtendedKeyUsage key purpose IDs that MAY be used to restrict a certificate's use: id-kp-secureShellClient, which indicates that the key can be used for a Secure Shell client, and id-kp-secureShellServer, which indicates that the key can be used for a Secure Shell server. In accordance with Section 4.2.1.12 of [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.), if the ExtendedKeyUsage extension is present, then the certificate MUST be used only for one of the purposes indicated. The object identifiers of the two key purpose IDs defined in this document are as follows:



 TOC 

3.  Signature Encoding

Signing and verifying using the X.509v3-based public key algorithms specified in this document (x509v3-ssh-dss, x509v3-ssh-rsa, x509v3-ecdsa-sha2-*) is done in the analogous way for the corresponding non-X.509v3-based public key algorithms (ssh-dss, ssh-rsa, ecdsa-sha2-*, respectively). For concreteness, we specify this explicitly below.



 TOC 

3.1.  x509v3-ssh-dss

Signing and verifying using the x509v3-ssh-dss key format is done according to the Digital Signature Standard [FIPS‑186‑3] (National Institute of Standards and Technology, “Digital Signature Standard (DSS),” June 2009.) using the SHA-1 hash [FIPS‑180‑2] (National Institute of Standards and Technology, “Secure Hash Standard,” August 2002.).

The resulting signature is encoded as follows:

  string  "ssh-dss"
  string  dss_signature_blob

The value for dss_signature_blob is encoded as a string containing r, followed by s (which are fixed-length 160-bit integers, without lengths or padding, unsigned, and in network byte order).

This format is the same as for ssh-dss signatures in Section 6.6 of [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.).



 TOC 

3.2.  x509v3-ssh-rsa

Signing and verifying using the x509v3-ssh-rsa key format is performed according to the RSASSA-PKCS1-v1_5 scheme in [RFC3447] (Jonsson, J. and B. Kaliski, “Public-Key Cryptography Standards (PKCS) #1: RSA Cryptography Specifications Version 2.1,” February 2003.) using the SHA-1 hash [FIPS‑180‑2] (National Institute of Standards and Technology, “Secure Hash Standard,” August 2002.).

The resulting signature is encoded as follows:

  string  "ssh-rsa"
  string  rsa_signature_blob

The value for rsa_signature_blob is encoded as a string containing s (which is an integer, without lengths or padding, unsigned, and in network byte order).

This format is the same as for ssh-rsa signatures in Section 6.6 of [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.).



 TOC 

3.3.  x509v3-rsa2048-sha256

Signing and verifying using the x509v3-rsa2048-sha256 key format is performed according to the RSASSA-PKCS1-v1_5 scheme in [RFC3447] (Jonsson, J. and B. Kaliski, “Public-Key Cryptography Standards (PKCS) #1: RSA Cryptography Specifications Version 2.1,” February 2003.) using the SHA-256 hash [FIPS‑180‑3] (National Institute of Standards and Technology, “Secure Hash Standard,” October 2008.); RSA keys conveyed using this format MUST have a modulus of at least 2048 bits.

The resulting signature is encoded as follows:

  string  "rsa2048-sha256"
  string  rsa_signature_blob

The value for rsa_signature_blob is encoded as a string containing s (which is an integer, without lengths or padding, unsigned, and in network byte order).

Unlike the other public key formats specified in this document, the x509v3-rsa2048-sha256 public key format does not correspond to any previously existing SSH non-certificate public key format. The main purpose of introducing this public key format is to provide an RSA-based public key format that is compatible with current recommendations on key size and hash functions. For example, NIST's draft recommendations on cryptographic algorithms and key lengths [SP‑800‑131] (Barker, E. and A. Roginsky, “DRAFT Recommendation for the Transitioning of Cryptographic Algorithms and Key Lengths,” June 2010.) specify that digital signature generation using an RSA key with modulus less than 2048 bits or with the SHA-1 hash function is acceptable through 2010 and deprecated from 2011 through 2013, whereas an RSA key with modulus at least 2048 bits and SHA-256 is acceptable for the indefinite future. The introduction of other non-certificate-based SSH public key formats compatible with the above recommendations is outside the scope of this document.



 TOC 

3.4.  x509v3-ecdsa-sha2-*

Signing and verifying using the x509v3-ecdsa-sha2-* key formats is performed according to the ECDSA algorithm in [FIPS‑186‑3] (National Institute of Standards and Technology, “Digital Signature Standard (DSS),” June 2009.) using the SHA2 hash function family [FIPS‑180‑3] (National Institute of Standards and Technology, “Secure Hash Standard,” October 2008.). The choice of hash function from the SHA2 hash function family is based on the key size of the ECDSA key as specified in Section 6.2.1 of [RFC5656] (Stebila, D. and J. Green, “Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer,” December 2009.).

The resulting signature is encoded as follows:

  string  "ecdsa-sha2-[identifier]"
  string  ecdsa_signature_blob

The string [identifier] is the identifier of the elliptic curve domain parameters. The format of this string is specified in Section 6.1 of [RFC5656] (Stebila, D. and J. Green, “Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer,” December 2009.).

The ecdsa_signature_blob value has the following specific encoding:

  mpint   r
  mpint   s

The integers r and s are the output of the ECDSA algorithm.

This format is the same as for ecdsa-sha2-* signatures in Section 3.1.2 of [RFC5656] (Stebila, D. and J. Green, “Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer,” December 2009.).



 TOC 

4.  Use in public key algorithms

The public key algorithms and encodings defined in this document SHOULD be accepted any place in the Secure Shell protocol suite where public keys are used, including, but not limited to, the following protocol messages for server authentication and user authentication:

When a public key from this specification is included in the input to a hash algorithm, the exact bytes that are transmitted on the wire must be used as input to the hash functions. In particular, implementations MUST NOT omit any of the chain certificates or OCSP responses that were included on the wire, nor change encoding of the certificate or OCSP data. Otherwise hashes that are meant to be computed in parallel by both peers will have differing values.

For the purposes of server authentication, the mapping between certificates and host names is left as an implementation and configuration issue for implementers and system administrators.

For the purposes of user authentication, the mapping between certificates and user names is left as an implementation and configuration issue for implementers and system administrators.



 TOC 

5.  Security Considerations

This document provides new public key algorithms for the Secure Shell protocol that convey public keys using X.509v3 certificates. For the most part, the security considerations involved in using the Secure Shell protocol apply, since all of the public key algorithms introduced in this document are based on existing algorithms in the Secure Shell protocol. However, implementers should be aware of security considerations specific to the use of X.509v3 certificates in a public key infrastructure, including considerations related to expired certificates and certificate revocation lists.

The reader is directed to the security considerations sections of [RFC5280] (Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” May 2008.) for the use of X.509v3 certificates, [RFC2560] (Myers, M., Ankney, R., Malpani, A., Galperin, S., and C. Adams, “X.509 Internet Public Key Infrastructure Online Certificate Status Protocol - OCSP,” June 1999.) for the use of OCSP response, [RFC4253] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” January 2006.) for server authentication, and [RFC4252] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Authentication Protocol,” January 2006.) for user authentication. Implementations SHOULD NOT use revoked certificates because many causes of certificate revocation mean that the critical authentication properties needed are no longer true. For example, compromise of a certificate's private key or issuance of a certificate to the wrong party are common reasons to revoke a certificate.

If a party to the SSH exchange attempts to use a revoked X.509v3 certificate, this attempt along with the date, time, certificate identity, and apparent origin IP address of the attempt SHOULD be logged as a security event in the system's audit logs or the system's general event logs. Similarly, if a certificate indicates that OCSP is used and there is no response to the OCSP query, the absence of a response along with the details of the attempted certificate use (as before) SHOULD be logged.

As with all specifications involving cryptographic algorithms, the quality of security provided by this specification depends on the strength of the cryptographic algorithms in use, the security of the keys, the correctness of the implementation, and the security of the public key infrastructure and the certificate authorities. Accorindgly, implementers are encouraged to use high assurance methods when implementing this specification and other parts of the Secure Shell protocol suite.



 TOC 

6.  IANA Considerations

Consistent with Section 8 of [RFC4251] (Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Protocol Architecture,” January 2006.) and Section 4.6 of [RFC4250] (Lehtinen, S. and C. Lonvick, “The Secure Shell (SSH) Protocol Assigned Numbers,” January 2006.), this document makes the following registrations:

In the Public Key Algorithm Names registry:

This document creates no new registries.

The two object identifiers used in Section 2.2.2 (ExtendedKeyUsage) were assigned from an arc delegated by IANA to the PKIX Working Group. No further action by IANA is necessary for this document.



 TOC 

7.  References



 TOC 

7.1. Normative References

[ASN1] International Telecommunications Union, “Abstract Syntax Notation One (ASN.1): Specification of basic notation,”  X.680, July 2002.
[FIPS-180-2] National Institute of Standards and Technology, “Secure Hash Standard,” FIPS 180-2, August 2002.
[FIPS-180-3] National Institute of Standards and Technology, “Secure Hash Standard,” FIPS 180-3, October 2008.
[FIPS-186-3] National Institute of Standards and Technology, “Digital Signature Standard (DSS),” FIPS 186-3, June 2009.
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC2560] Myers, M., Ankney, R., Malpani, A., Galperin, S., and C. Adams, “X.509 Internet Public Key Infrastructure Online Certificate Status Protocol - OCSP,” RFC 2560, June 1999 (TXT).
[RFC3447] Jonsson, J. and B. Kaliski, “Public-Key Cryptography Standards (PKCS) #1: RSA Cryptography Specifications Version 2.1,” RFC 3447, February 2003 (TXT).
[RFC4250] Lehtinen, S. and C. Lonvick, “The Secure Shell (SSH) Protocol Assigned Numbers,” RFC 4250, January 2006 (TXT).
[RFC4251] Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Protocol Architecture,” RFC 4251, January 2006 (TXT).
[RFC4252] Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Authentication Protocol,” RFC 4252, January 2006 (TXT).
[RFC4253] Ylonen, T. and C. Lonvick, “The Secure Shell (SSH) Transport Layer Protocol,” RFC 4253, January 2006 (TXT).
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” RFC 5280, May 2008 (TXT).
[RFC5480] Turner, S., Brown, D., Yiu, K., Housley, R., and T. Polk, “Elliptic Curve Cryptography Subject Public Key Information,” RFC 5480, March 2009 (TXT).
[RFC5656] Stebila, D. and J. Green, “Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer,” RFC 5656, December 2009 (TXT).
[RFC5758] Dang, Q., Santesson, S., Moriarty, K., Brown, D., and T. Polk, “Internet X.509 Public Key Infrastructure: Additional Algorithms and Identifiers for DSA and ECDSA,” RFC 5758, January 2010 (TXT).


 TOC 

7.2. Informative References

[RFC4432] Harris, B., “RSA Key Exchange for the Secure Shell (SSH) Transport Layer Protocol,” RFC 4432, March 2006 (TXT).
[RFC4462] Hutzelman, J., Salowey, J., Galbraith, J., and V. Welch, “Generic Security Service Application Program Interface (GSS-API) Authentication and Key Exchange for the Secure Shell (SSH) Protocol,” RFC 4462, May 2006 (TXT).
[RFC5759] Solinas, J. and L. Zieglar, “Suite B Certificate and Certificate Revocation List (CRL) Profile,” RFC 5759, January 2010 (TXT).
[SP-800-131] Barker, E. and A. Roginsky, “DRAFT Recommendation for the Transitioning of Cryptographic Algorithms and Key Lengths,” NIST Special Publication 800-131, June 2010.


 TOC 

Appendix A.  Example

The following example illustrates the use of an X.509v3 certificate for a public key for the Digital Signature Algorithm when used in a Diffie-Hellman key exchange method. In the example, there is a chain of certificates of length 2, and a single OCSP response is provided.

  byte    SSH_MSG_KEXDH_REPLY
  string  0x00 0x00 0xXX 0xXX  -- length of the remaining data in this string
          0x00 0x00 0x00 0x0D  -- length of string "x509v3-ssh-dss"
          "x509v3-ssh-dss"
          0x00 0x00 0x00 0x02  -- there are 2 certificates
          0x00 0x00 0xXX 0xXX  -- length of sender certificate
          DER-encoded sender certificate
          0x00 0x00 0xXX 0xXX  -- length of issuer certificate
          DER-encoded issuer certificate
          0x00 0x00 0x00 0x01  -- there is 1 OCSP response
          0x00 0x00 0xXX 0xXX  -- length of OCSP response
          DER-encoded OCSP response
  mpint   f
  string  signature of H


 TOC 

Appendix B.  Acknowledgements

The authors gratefully acknowledge helpful comments from Ran Atkinson, Samuel Edoho-Eket, Joseph Galbraith, Jeffrey Hutzelman, Jan Pechanec, Sean Turner, and Nicolas Williams.

O. Saarenmaa and J. Galbraith previously prepared an Internet-Draft on a similar topic.



 TOC 

Authors' Addresses

  Kevin M. Igoe
  National Security Agency
  NSA/CSS Commercial Solutions Center
  United States of America
Email:  kmigoe@nsa.gov
  
  Douglas Stebila
  Queensland University of Technology
  Information Security Institute
  Level 7, 126 Margaret St
  Brisbane, Queensland 4000
  Australia
Email:  douglas@stebila.ca