RTP Control Protocol (RTCP) Extended Report (XR) Block for Discard Count metric Reporting
draft-ietf-xrblock-rtcp-xr-discard-14.txt

Abstract

This document defines an RTP Control Protocol(RTCP) Extended Report (XR) Block that allows the reporting of a simple discard count metric for use in a range of RTP applications.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on November 21, 2013.

Copyright Notice

Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 1.1. Discard Count Report Block
• 1.2. RTCP and RTCP XR Reports
• 1.3. Performance Metrics Framework
• 1.4. Applicability
• 2. Terminology
• 2.1. Standards Language
• 3. Discard Count Metric Report Block
• 3.1. Report Block Structure
• 3.2. Definition of Fields in Discard Count Metric Report Block
• 4. SDP Signaling
• 4.1. SDP rtcp-xr-attrib Attribute Extension
• 4.2. Offer/Answer Usage
• 5. IANA Considerations
• 5.1. New RTCP XR Block Type value
• 5.2. New RTCP XR SDP Parameter
• 5.3. Contact information for registrations
• 6. Security Considerations
• 7. Contributors
• 8. Acknowledgments
• 9. References
• 9.1. Normative References
• 9.2. Informative References
• Appendix A. Metrics represented using RFC6390 Template
• Appendix B. Change Log
• B.1. draft-ietf-xrblock-rtcp-xr-discard-14
• B.2. draft-ietf-xrblock-rtcp-xr-discard-13
• B.3. draft-ietf-xrblock-rtcp-xr-discard-12
• Authors' Addresses

1. Introduction

1.1. Discard Count Report Block

This document defines a new block type to augment those defined in [RFC3611] for use in a range of RTP applications. The new block type supports the reporting of the number of packets which are received correctly but are never played out, typically because they arrive too late to be played out (buffer underflow) or too early (buffer overflow). The metric is applicable both to systems which use packet loss repair techniques (such as forward error correction [RFC5109] or retransmission [RFC4588]) and to those which do not.

This metric is useful for identifying the existence, and characterizing the severity, of a packet transport problem which may affect users' perception of a service delivered over RTP.

This block may be used in conjunction with [BGDISCARD] which provides additional information on the pattern of discarded packets. However the metric in [BGDISCARD] may be used independently of the metrics in this block.

When a Discard Count Metrics Block is sent together with a Burst Gap Discard Metrics Block (defined in [BGDISCARD] ) to the media sender or RTP based network management system, the information carried in the Discard Count Metrics Block and the Burst Gap Discard Metrics Block allows systems receiving the blocks to calculate burst gap summary statistics (e.g., the gap discard rate).

The metric belongs to the class of transport-related end system metrics defined in [RFC6792].

1.2. RTCP and RTCP XR Reports

The use of RTCP for reporting is defined in [RFC3550]. [RFC3611] defined an extensible structure for reporting using an RTCP Extended Report (XR). This document defines a new Extended Report block for use with [RFC3550] and [RFC3611].

1.3. Performance Metrics Framework

The Performance Metrics Framework [RFC6390] provides guidance on the definition and specification of performance metrics. The RTP Monitoring Architectures [RFC6792] provides guideline for reporting block format using RTCP XR. The metrics block described in this document are in accordance with the guidelines in [RFC6390] and [RFC6792].

1.4. Applicability

This metric is believed to be applicable to a large class of RTP applications which use a jitter buffer.

Discards due to late or early arriving packets affects user experience. The reporting of discards alerts senders and other receivers to the need to adjust their transmission or reception strategies. The reports allow network managers to diagnose these user experience problems.

The ability to detect duplicate packets can be used by managers to detect network layer or sender behavior which may indicate network or device issues. Based on the reports, these issues may be addressed prior to any impact on user experience.

2. Terminology

2.1. Standards Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].

In addition, the following terms are defined:

Received, Lost and Discarded

A packet shall be regarded as lost if it fails to arrive within an implementation-specific time window. A packet that arrives within this time window but is either too early to be played out or too late to be played out or thrown away before playout due to packet duplication or redundancy shall be regarded as discarded. A packet shall not be regarded as discarded if it arrives within this time window but is dropped during decoding by some higher layer decoder, e.g., due to a decoding error. A packet shall be classified as one of received (or OK), discarded or lost. The Discard Count Metric counts only discarded packets. The metric "cumulative number of packets lost" defined in [RFC3550] reports a count of packets lost from the media stream (single Synchronization source (SSRC) within single RTP session). Similarly the metric "number of packets discarded" reports a count of packets discarded from the media stream (single SSRC within single RTP session) arriving at the receiver. Another metric defined in [RFC5725] is available to report on packets which are not recovered by any repair techniques which may be in use.

3. Discard Count Metric Report Block

Metrics in this block report on the number of packets discarded in the stream arriving at the RTP end system. The measurement of these metrics is made at the receiving end of the RTP stream. Instances of this metrics block refer by SSRC to the separate auxiliary Measurement Information Block [RFC6776] which describes measurement Intervals in use. This metrics block relies on the measurement interval in the Measurement Information Block indicating the span of the report and MUST be sent in the same compound RTCP packet as the measurement information block. If the measurement interval is not received in the same compound RTCP packet as this metrics block, this metrics block MUST be discarded.

3.1. Report Block Structure

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     BT=PDC    | I |DT |  resv.|      block length = 2         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                        SSRC of Source                         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                    number of packets discarded                |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 1: Report Block Structure

3.2. Definition of Fields in Discard Count Metric Report Block

Block type (BT): 8 bits

A Discard Count Metric Report Block is identified by the constant PDC.

[Note to RFC Editor: please replace PDC with the IANA provided RTCP XR block type for this block.]

Interval Metric Flag (I): 2 bits

This field indicates whether the reported metric is an interval, cumulative, or sampled metric [RFC6792]:

• I=10: Interval Duration - the reported value applies to the most recent measurement interval duration between successive metrics reports.
• I=11: Cumulative Duration - the reported value applies to the accumulation period characteristic of cumulative measurements.
• I=01: Sampled Value - the reported value is a sampled instantaneous value.

In this document, the Discard Count Metric can only be measured over definite intervals, and cannot be sampled. Accordingly, the value I=01, indicating a sampled value, MUST NOT be sent, and MUST be discarded when received. In addition, the value I=00 is reserved and also MUST NOT be sent, and MUST be discarded when received.

Discard Type (DT): 2bits

This field is used to identify the discard type used in this report block. The discard type is defined as follows:

• 00: Report packet discarded or being thrown away before playout due to packets duplication.
• 01: Report packet discarded due to too early to be played out.
• 10: Report packet discarded due to too late to be played out.

The value DT=11 is reserved for future definition and MUST NOT be Sent,and MUST be discarded when received.

An endpoint MAY report any combination of discard types in each reporting interval by including several Discard Count Metric Report Blocks in a single RTCP XR packet.

Some systems send duplicate RTP packets for robustness or error resilience. This is NOT RECOMMENDED since it breaks RTCP packet statistics. If duplication is desired for error resilience, the mechanism described in [RTPDUP] can be used, since this will not cause breakage of RTP streams or RTCP statistics.

Reserved (resv): 4 bits

These bits are reserved. They MUST be set to zero by senders and ignored by receivers (See RFC6709 section 4.2).

block length: 16 bits

The length of this report block in 32-bit words, minus one, in accordance with the definition in [RFC3611]. This field MUST be set to 2 to match the fixed length of the report block. The block MUST be discarded if the block length is set to a different value.

SSRC of source: 32 bits

As defined in Section 4.1 of [RFC3611].

number of packets discarded: 32 bits

Number of packets discarded over the period (Interval or Cumulative) covered by this report.

The measured value is unsigned value. If the measured value exceeds 0xFFFFFFFD, the value 0xFFFFFFFE MUST be reported to indicate an over-range measurement. If the measurement is unavailable, the value 0xFFFFFFFF MUST be reported.

Note that the number of packets expected in the period associated with this metric (whether interval or cumulative) is available from the difference between a pair of extended sequence numbers in the Measurement Information block [RFC6776], so need not be repeated in this block.

4. SDP Signaling

[RFC3611] defines the use of SDP (Session Description Protocol) [RFC4566] for signaling the use of XR blocks. However XR blocks MAY be used without prior signaling (see section 5 of RFC3611).

4.1. SDP rtcp-xr-attrib Attribute Extension

xr-format =/ xr-pdc-block
xr-pdc-block = "pkt-discard-count"

This section augments the SDP [RFC4566] attribute "rtcp-xr" defined in [RFC3611] by providing an additional value of "xr-format" to signal the use of the report block defined in this document.

4.2. Offer/Answer Usage

When SDP is used in offer-answer context, the SDP Offer/Answer usage defined in [RFC3611] for unilateral "rtcp-xr" attribute parameters applies. For detailed usage of Offer/Answer for unilateral parameter, refer to section 5.2 of [RFC3611].

5. IANA Considerations

New block types for RTCP XR are subject to IANA registration. For general guidelines on IANA considerations for RTCP XR, refer to [RFC3611].

5.1. New RTCP XR Block Type value

This document assigns the block type value PDC in the IANA " RTP Control Protocol Extended Reports (RTCP XR) Block Type Registry " to the "Discard Count Metrics Block".

[Note to RFC Editor: please replace PDC with the IANA provided RTCP XR block type for this block.]

5.2. New RTCP XR SDP Parameter

This document also registers a new parameter "pkt-discard-count" in the " RTP Control Protocol Extended Reports (RTCP XR) Session Description Protocol (SDP) Parameters Registry ".

5.3. Contact information for registrations

The following contact information is provided for all 
registrations in this document:

Qin Wu (sunseawq@huawei.com)

101 Software Avenue, Yuhua District
Nanjing, Jiangsu  210012
China

6. Security Considerations

It is believed that this proposed RTCP XR report block introduces no new security considerations beyond those described in [RFC3611]. This block does not provide per-packet statistics so the risk to confidentiality documented in Section 7, paragraph 3 of [RFC3611] does not apply.

7. Contributors

Geoff Hunt wrote the initial draft of this document.

8. Acknowledgments

The authors gratefully acknowledge reviews and feedback provided by Bruce Adams, Philip Arden, Amit Arora, Bob Biskner, Kevin Connor, Claus Dahm, Randy Ethier, Roni Even, Jim Frauenthal, Albert Higashi, Tom Hock, Shane Holthaus, Paul Jones, Rajesh Kumar, Keith Lantz, Mohamed Mostafa, Amy Pendleton, Colin Perkins, Mike Ramalho, Ravi Raviraj, Albrecht Schwarz, Tom Taylor, and Hideaki Yamada, Kevin Gross, Varun Singh, Claire Bi, Roni Even, Dan Romascanu and Jonathan Lennox.

9. References

9.1. Normative References

9.2. Informative References

Appendix A. Metrics represented using RFC6390 Template

RFC EDITOR NOTE: please change XXXX in [RFCXXXX] by the new RFC number, when assigned.

1. Number of packets discarded Metric
   
   
   • Metric Name: Number of RTP packets discarded Metric
     
     
   • Metric Description: Number of RTP packets discarded over the period covered by this report.
     
     
   • Method of Measurement or Calculation: See section 3.2, number of packets discarded definition [RFCXXXX].
     
     
   • Units of Measurement: See section 3.2, number of packets discarded definition [RFCXXXX].
     
     
   • Measurement Point(s) with Potential Measurement Domain: See section 3, 1st paragraph [RFCXXXX].
     
     
   • Measurement Timing: See section 3, 1st paragraph [RFCXXXX] for measurement timing and section 3.2 [RFCXXXX] for Interval Metric flag.
     
     
   • Use and applications: See section 1.4 [RFCXXXX].
     
     
   • Reporting model: See RFC3611.
     
     

Appendix B. Change Log

Note to the RFC-Editor: please remove this section prior to publication as an RFC.

B.1. draft-ietf-xrblock-rtcp-xr-discard-14

The following are the major changes compared to previous version:

• Editorial changes to paragraph 4 of section 1.1.

B.2. draft-ietf-xrblock-rtcp-xr-discard-13

The following are the major changes compared to previous version:

• Some editorial changes to get in line with burst gap drafts.

B.3. draft-ietf-xrblock-rtcp-xr-discard-12

The following are the major changes compared to previous version:

• Incorporate some changes to burst gap draft that applies to this document.
• Use RFC6390 template to the metrics in the appendix.

Authors' Addresses