| DISPATCH Working Group | V.H. Hilt |
| Internet-Draft | Bell Labs/Alcatel-Lucent |
| Intended status: Standards Track | D.R. Worley |
| Expires: August 31, 2012 | Avaya Inc. |
| G. Camarillo | |
| Ericsson | |
| J.R. Rosenberg | |
| jdrosen.net | |
| March 01, 2012 |
A User Agent Profile Data Set for Media Policy
draft-ietf-sipping-media-policy-dataset-15
This specification defines an XML document format to describe the media properties of Session Initiation Protocol (SIP) sessions. Examples for media properties are the codecs or media types used in the session. This document also defines an XML document format to describe policies that limit the media properties of SIP sessions.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 31, 2012.
Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The Framework for Session Initiation Protocol (SIP) [RFC3261] User Agent Profile Delivery [RFC6080] and the Framework for SIP Session Policies [I-D.ietf-sip-session-policy-framework] define mechanisms to convey session policies and configuration information from a network server to a user agent. An important piece of the information conveyed to the user agent relates to the media properties of the SIP sessions set up by the user agent. Examples for these media properties are the codecs and media types used, the media-intermediaries to be traversed, or the maximum bandwidth available for media streams.
This specification defines a document format for media properties of SIP sessions: the Media Policy Dataset Format (MPDF). This format can be used in two ways. First, it can be used to describe the properties of a given SIP session (e.g., the media types and codecs used). These MPDF documents are called session info documents and they are usually created based on the session description of a session. Second, the MPDF format can be used to define policies for SIP sessions in a session policy document. A session policy document defines properties for a session (e.g., the media types allowed in a session), independent of a specific session description.
If used with the Framework for SIP Session Policies [I-D.ietf-sip-session-policy-framework], session info documents are used in conjunction with session-specific policies. A session info document is created by a UA based on the current session description and submitted to the policy server. The policy server examines the session info document, modifies it if necessary (e.g., by removing video streams if video is not permitted) and returns the possibly modified session info document to the UA. Session policy documents on the other hand are used to describe session-independent policies that can be submitted to the UA independent of a specific session.
The two types of MPDF documents, session information and session policy documents, share the same set of XML elements to describe session properties. Since these elements are used in different contexts for session info and session policy documents, two different root elements exist for the two document types: <session-info> is the root element for session information documents and <session-policy> is the root element for session policy documents.
A user agent can receive multiple session policy documents from different sources. This can lead to a situation in which the user agent needs to apply multiple session policy documents to the same session. This standard specifies merging rules for those XML elements that can be present in session policy documents. It should be noted that these merging rules are part of the semantics of a session policy XML element. User agents implement the merging rules as part of implementing the element semantics. As a consequence, it is not possible to build an entity that can mechanically merge two session policy documents without understanding the semantics of all elements in the input documents.
Merging rules are not needed for elements of session information documents since they are created by one source and describe a specific session.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].
This section discusses fundamental properties of the Media Policy Dataset Format (MPDF).
The MPDF format is based on XML [W3C.REC-xml-20040204]. A MPDF document MUST be well-formed and MUST be valid according to schemas, including extension schemas, available to the validator and applicable to the XML document. MPDF documents MUST be based on XML 1.0 and MUST be encoded using UTF-8.
MPDF makes use of XML namespaces [W3C.REC-xml-names-19990114]. The namespace URIs for schemas defined in this specification are URNs [RFC2141], using the namespace identifier 'ietf' defined by [RFC2648] and extended by [RFC3688]. The namespace URN for the MPDF schema is:
The media type for the Media Policy Dataset Format is:
The MPDF format can be extended using XML extension mechanisms if additional media properties are needed. In particular, elements from different XML namespaces MAY be present within a MPDF document for the purposes of extensibility; elements or attributes from unknown namespaces MUST be ignored.
The following attributes can be used with elements of the MPDF format. The specification of each MPDF element lists which of these attributes MAY be used. If an element bears an attribute which may not be used with it, the recipient MUST ignore the attribute.
The attribute 'visibility' specifies whether or not the user agent is permitted to display the property value to the user. This is used to hide setting values that the administrator may not want the user to see or know. The 'visibility' attribute has two possible values:
Some properties are unidirectional and only apply to messages or data streams transmitted into one direction. For example, a property for media streams can be restricted to outgoing media streams only. Unidirectional properties can be expressed by adding a 'direction' attribute to the respective element.
The 'direction' attribute can have the following values:
It is possible to express a preference for a certain value relative to the other values within a set of multiple values that are allowed within a property. For example, it is possible to express that the codecs G.711 and G.729 are allowed, but G.711 is preferred. Preferences are be expressed by adding a 'q' attribute to a property element. As specified for the elements which can have the 'q' attribute, it is only allowed in contexts which specify allowed values (as opposed to contexts which specify forbidden values).
The value of the 'q' attribute is a decimal number within the range 0 to 1, inclusive. An element with a higher 'q' value is preferred over one with a lower 'q' value.
The media-type attribute is used to define that an element only applies to streams of a certain media type. For example, it may only apply to audio streams. The value of the 'media-type' attribute MUST be the media type, such as 'audio', 'video', 'text', or 'application'.
The label attribute is used to identify a specific media stream. The value of the label attribute is a token, whose syntax is defined in [RFC4566]. The token can be chosen freely, however, it MUST be unique among all <stream> elements in a session-info document.
The 'enabled' attribute specifies whether or not the user agent is allowed to establish a media stream. This boolean attribute has two possible values:
Session info documents describe key properties of a SIP session such as the media streams used in the session. Session info documents are typically created based on an SDP [RFC4566] session description or an SDP offer/answer pair [RFC3264].
Session info documents can be used for session-specific policies [I-D.ietf-sip-session-policy-framework]. In this usage, a UA creates a session info document based on its SDP description(s) and sends this document to the policy server. The policy server modifies this document according to the policies that apply to the described session and returns a version of the session info document that is compliant to the policies. For example, if video streams are not permissible under current policies and the UA submits a session info document that contains a video stream, the policy server will disable (i.e., enabled="no") the video stream in the session info document that it returns to the UA.
Session info documents use the <session-info> root element. They use elements described in this section and common elements described in Section 6.
Elements that are only present in session info document do not require merging rules. If used in the context of session-specific policies, session info documents are sent to one policy server at a time only, therefore a UA does not need to merge multiple session info documents into one. A policy server needs to modify a session info document it has received according to its policies. The modification of session info documents is determined by the local policies of the policy server and outside the scope of this standard.
A policy server can completely reject a session by returning an session info document with an empty <session-info> element:
If a UA has an SDP offer and answer pair [RFC3264] and wants to create a session info document, the UA uses the answer to fill in the elements of the session info document except for the <remote-host-port> and <local-host-port> elements, which are taken from the remote and local SDP respectively, and the <codec> elements, which contain the codecs that appear in both the offer and the answer. (The local SDP is the one sent by the UA; the remote session description is the one received from the remote UA.)
The following rules describe the creation of session info documents based on SDP description(s) for a few exemplary elements. Other elements are created following the same principles.
A UA MUST create a separate <stream> element for each m= line in an SDP description; the order of the <stream> elements corresponds to the order of the m= lines. The UA MUST insert the media type from the m= line into a <media-type> element and MUST create a <codec> element for each codec listed in the m= line. The UA MUST insert a <codec> element for each of the codecs that appear in both the offer and the answer. The <codec> elements must have 'q' attributes with values that decrease with the order the codecs are given in the m= line. (Other than the ordering restriction, the particular values used are not specified by this document.)
The UA MUST create a <local-host-port> element for each stream using the port taken from the m= line and the address from the corresponding c= line of the local session description. The UA MUST create a <remote-host-port> element using the port and address from the m= and c= lines for the same stream taken from the remote session description if this session description is available.
The numeric value in a "b=CT:..." attribute in a session description is used to set the content of a <max-bw> element with the direction attribute value corresponding to which SDP contains the b= attribute.
The numeric value in a "b=AS:..." attribute in a session description is used to set the content of a <max-session-bw> element with the direction attribute value corresponding to the SDP which contains the b= attribute.
The numeric value in a "b=AS:..." attribute in a media description is used to set the content of a <max-stream-bw> element child of the appropriate <stream> element, with the direction attribute value corresponding to the SDP which contains the b= attribute.
An "a=label:..." attribute [RFC4574] is used to set the 'label' attribute of the appropriate <stream> element.
The mapping from a session info document to a SDP description follows essentially the same rules in the reverse direction.
For any particular m= line, the codecs must be listed in decreasing order of the values of the 'q' attributes of the corresponding <codec> elements.
The <session-info> element describes the properties of a specific SIP session. The <session-info> element MAY contain one optional <streams>, <context> and multiple (including zero) <max-bw>, <max-session-bw>, <max-stream-bw>, <media-intermediaries> and <qos-dscp> elements as well as elements from other namespaces. The MPDF elements are defined in Section 6.
The <streams> element is a container that is used to describe the media streams used in a session. A <streams> element contains zero or more <stream> elements. Each <stream> element describes the properties (e.g., media type, codecs and IP addresses and ports) of a single media stream.
The <stream> element describes a specific media stream. It contains the media type, codecs and the hostname(s) or IP address(es) and port(s) of this stream.
The hostname(s) or IP address(es) and port number(s) of a stream correspond to the ones listed in the session description(s). A UA that generates a <stream> element MUST insert the hostname/port found in the local session description for this media stream into the local-host-port element. The UA MUST insert the hostname/port of the remote session description into the remote-host-port element, if the remote session description is available to the UA. If not, the UA generates a stream element that only contains the local-host-port element.
This element MAY have the direction, label, and enabled attributes (see Section 3.3).
The 'label' attribute is used to identify a specific media stream. The value of the label attribute is a token that is unique among all <stream> elements in a session-info document and whose syntax is defined in [RFC4566]. If an SDP label attribute [RFC4574] is present in the SDP description, its value MUST be used as the 'label' attribute value of the corresponding <stream> element.
The 'enabled' attribute specifies whether or not the user agent is allowed to establish a media stream.
The <stream> element MUST contain one <media-type> element, one or more <codec> elements and one <local-host-port> element. The <stream> element MAY contain one <remote-host-port> element.
The <local-host-port> element contains the hostname or IP address and the receiving port number of the media stream in the local session description. The hostname or IP address is separated from the port by a ":". An example is: "host.example.com:49562".
The hostname or IP address of element is found in the c= element for the stream in the local SDP description. The port number is found in the m= element.
The <remote-host-port> element is structured exactly as the <local-host-port> element. However, it identifies the hostname or IP address and receiving port number of the media stream in the remote session description.
The <media-intermediaries> element expresses a policy for routing media streams through media intermediaries. The purpose of the <media-intermediaries> element is to tell the UA to send media streams through a chain of media intermediaries. The manner in which the UA arranges for a media stream to pass through the intermediaries depends on the type of intermediary.
The <media-intermediaries> element is a container that lists all media intermediaries to be traversed. Media intermediaries should be traversed in the order in which they appear in this list. The topmost entry should be traversed first, the last entry should be traversed last.
Different types of intermediaries exist. These intermediaries are not necessarily interoperable and it may not be possible to chain them in an arbitrary order. A <media-intermediaries> element SHOULD therefore only contain intermediary elements of the same type.
This element MAY have the direction attribute (see Section 3.3).
Multiple <media-intermediaries> elements MAY only be present in a container if each applies to a different set of streams (e.g., one <media-intermediaries> element for incoming and one for outgoing streams). The <media-intermediaries> element MUST contain one or more elements defining a specific media intermediary, such as <fixed-intermediary> or <turn-intermediary>.
A fixed intermediary relies on pre-configured forwarding rules. The user agent simply sends media to the first media intermediary listed. It can assume that this media intermediary has been pre-configured with a forwarding rule for the media stream and knows where to forward the packets to. The configuration of forwarding rules in the intermediary must be done through other means.
The contents of a <fixed-intermediary> element MUST be echoed to all policy servers that provide policies for a session. I.e., if multiple policy servers provide policies for the same session, this element needs to be forwarded to all of them, possibly in a second round of session-specific policy subscriptions as described in [I-D.ietf-sip-session-policy-framework] in section Contacting the Policy Server.
The <fixed-intermediary> element MUST contain one <int-host-port> element and MAY contain multiple optional <int-addl-port> elements.
The <int-host-port> element contains the hostname or IP address and port number of a media intermediary. The UA uses this hostname/IP address and port to send its media streams to the intermediary. The hostname or IP address is separated from the port by a ":".
If a protocol uses multiple subsequent ports (e.g., RTP), the lowest port number SHOULD be included in the <int-host-port> element. All additional port numbers SHOULD be identified in <int-addl-port> elements.
If a protocol uses multiple subsequent ports (e.g., RTP), the lowest port number SHOULD be included in the <int-host-port> element. All additional port numbers SHOULD be identified in <int-addl-port> elements.
The TURN [RFC5766] protocol provides a mechanism for inserting a relay into the media path. Although the main purpose of TURN is NAT traversal, it is possible for a TURN relay to perform other media intermediary functionalities. The user agent establishes a binding on the TURN server and uses this binding to transmit and receive media.
The <turn-intermediary> element MUST contain one <int-host-port> element and MAY contain multiple optional <int-addl-port> elements and zero or one each of the <shared-secret>, <user>, and <transport> elements. If no <transport> element is present, UDP is assumed.
The <shared-secret> element contains the shared secret needed to authenticate at the media intermediary.
The <user> element contains the user ID needed to authenticate to the media intermediary.
The <transport> element contains the name of the transport to be used for communicating with the TURN server. This document defines the values "tcp" and "udp" for use in the <transport> element. Other specifications may define additional values.
The MSRP Relay Extensions [RFC4976] define a means for incorporating relays into the media path of an MSRP [RFC4975] session. MSRP is explicitly designed for a variety of purposes, including policy enforcement.
The <msrp-intermediary> element MUST contain one <msrp-uri> element, and may contain zero or one each of the <shared-secret> and <user> elements.
The <msrp-uri> element contains a URI that indicates the MSRP server to use for an intermediary. The UA uses this URI to authenticate with the MSRP relay, and then uses the URI it learns through that authentication process for any MSRP media it sends or receives. Only URIs with a scheme of "msrps:" are valid in the <msrp-uri> element.
Session policy documents describe policies for SIP sessions. Session policy documents are independent of any specific session description and express general policies for SIP sessions. A session policy document is used to determine if a SIP session is policy conformant and can be used to modify the session, if needed, to conform to the described policies.
Session policy documents can be used to encode session-independent policies [I-D.ietf-sip-session-policy-framework]. In this usage, a policy server creates a session policy document and passes this document to a UA. The UA applies the policies defined to the SIP sessions it is establishing. For example, a session policy document can contain an element that prohibits the use of video. To set up a session that is compliant to this policy, a UA does not include the media type video in its SDP offer or answer.
Session policy documents use the <session-policy> root element. They use elements described in this section and common elements described in Section 6.
A UA may receive session policy documents from multiple sources; multiple session policy documents can be merged into a single session policy document which expresses the logical AND of the policies.
Properties that have a single value (e.g., the maximum bandwidth allowed) require that a common value is determined for this property during the merging process. The merging rules for determining this value need to be defined individually for each element in the schema definition (e.g., select the lowest maximum bandwidth).
The <media-types-allowed>, <media-types-excluded>, <codecs-allowed> and <codecs-excluded> are containers that contain a set of media-types/codecs. The values defined in these containers need to be merged to determine the set of media-types/codecs that are permissible in a session. Note that for a particular codec, the <mime-parameter> element (see Section 6.2.2) allows identifying a particular encoding of profile of the codec. Therefore, when the <mime-parameter> element is present, what is allowed or excluded is the particular encoding or profile. Other encoding or profiles of the same codec are unaffected.
To merge the media-types-* and codecs-* containers a UA needs to apply all containers it has received one after the other the set of media-types/codecs it supports. After applying media-types-*/codecs-* elements, the UA has the list of media-types/codecs that are allowed in a session. The containers can be applied in any order. However, each time a container is applied to the set of media-types/codecs allowed, this set MUST stay the same or be reduced. Media-types/codecs cannot be added during this process.
The following example illustrates the merging process for two data sets. In this example, the UA supports the following set of audio codecs: PCMA, PCMU and G729. After applying session policy document 1, the UA removes PCMA as it is disallowed by this policy. The remaining set of codecs is: PCMU and G729. Session policy document 2 disallows all codecs that are not listed. After applying this policy, the set of codecs allowed is: G729.
Session Policy Document 1: <codecs-excluded> <codec><media-type-subtype>audio/PCMA</media-type-subtype></codec> </codecs> Session Policy Document 2: <codecs-allowed> <codec><media-type-subtype>audio/PCMA</media-type-subtype></codec> <codec><media-type-subtype>audio/G729</media-type-subtype></codec> </codecs>
It is possible that two session policy documents define non-overlapping sets of allowed media-types or codecs. The resulting merged set would be empty, which is illegal according to the schema definition of the media-types/codecs element. This constitutes a conflict that cannot be resolved automatically. If these properties are enforced by both networks, the UA will not be able to set up a session.
The combined set of media-types/codecs MUST again be valid and well-formed according to the schema definitions. A conflict occurs if the combined property set is not a well-formed document after the merging process is completed.
Some properties require that only values from the local policy server are used. The local policy server is the policy server that is in the local domain of the user agent.
If policy documents are delivered through the configuration framework [RFC6080], the value received through a subscription using the "local-network" profile-type is used. Values received through other profile-type subscriptions are discarded.
If policy documents are delivered through the session-specific policy mechanism [I-D.ietf-sip-session-policy-framework] the value received from the policy server identified by the Local Policy Server URI are used. Values received from other policy servers are discarded.
The <session-policy> element describes a policy that applies to SIP sessions. The <session-policy> element MAY contain one optional <context> and <local-ports> element and multiple (including zero) <media-types-allowed>, <media-types-excluded>, <codecs-allowed>, <codecs-excluded>, <max-bw>, <max-session-bw>, <max-stream-bw> and <qos-dscp> elements as well as elements from other namespaces. The MPDF elements are defined in Section 6.
The <media-types-allowed> element is a container that is used to define the set of media types (e.g., audio, video) that are allowed in a session. All media types that are not listed in this container are not permitted in a session. A specific media type is allowed by adding the corresponding <media-type> element to this container.
This element MAY have the direction and visibility attributes (see Section 3.3).
Multiple <media-types-allowed> elements MAY only be present in a container element if each applies to a different set of streams (e.g., one <media-types-allowed> element for incoming and one for outgoing streams). The <media-types-allowed> element MUST contain zero or more <media-type> elements.
A <media-types-allowed> element MUST NOT be used in a container that contains a <media-types-excluded> element.
The <media-types-excluded> element is a container that is used to define the set of media types (e.g., audio, video) that are not permitted in a session. All media types that are not listed in this container are allowed and can be used in a session. A specific media type is excluded from a session by adding the corresponding <media-type> element to this container.
This element MAY have the direction and visibility attributes (see Section 3.3).
Multiple <media-types-excluded> elements MAY only be present in a container element if each applies to a different set of streams (e.g., one <media-types-excluded> element for incoming and one for outgoing streams). The <media-types-excluded> element MUST contain zero or more <media-type> elements.
A <media-types-excluded> element MUST NOT be used in a container that contains a <media-types-allowed> element.
The <codecs-allowed> element is a container that is used to define the set of codecs that may be used in a session. All codes not listed in the <codecs-allowed> element are disallowed and MUST NOT be used in a session. A policy MUST allow the use of at least one codec per media type. A specific codec is allowed by adding the corresponding <codec> element to this container.
The <codecs-allowed> element MAY have the direction and visibility attributes (see Section 3.3).
Multiple <codecs-allowed> elements MAY only be present in a container element if each applies to a different set of streams (e.g., one <codecs-allowed> element for incoming and one for outgoing streams). The <codecs-allowed> element MUST contain zero or more <codec> elements.
A <codecs-allowed> element MUST NOT be used in a container that contains a <codecs-excluded> element.
The <codecs-excluded> element is a container that is used to define the set of codecs that are disallowed in a session. All codes not listed in the <codecs-excluded> element are permitted and MAY be used in a session. A specific codec is disallowed by adding the corresponding <codec> element to this container.
The <codecs-excluded> element MAY have the direction and visibility attributes (see Section 3.3).
Multiple <codecs-excluded> elements MAY only be present in a container element if each applies to a different set of streams (e.g., one <codecs-excluded> element for incoming and one for outgoing streams). The <codecs-excluded> element MUST contain zero or more <codec> elements.
A <codecs-excluded> element MUST NOT be used in a container that contains a <codecs-allowed> element.
Domains often require that a user agent only uses ports in a certain range for media streams. The <local-ports> element defines a policy for the ports a user agent can use for media. The value of this element consists of the decimal representation of a start port number and an end port number, separated by a "-". The start/end port numbers are the first/last port numbers that can be used, that is, the range is inclusive. The start/end port numbers must be in the range 1 to 65535 (inclusive).
As with other policy elements, there are values of the <local-ports> element that allow no sessions. This happens if the start port number is greater than the end port number.
The default value for <local-ports> is "1-65535".
This element MAY have the visibility attributes (see Section 3.3).
This section describes common XML elements that are used in session info and session policy documents to encode the media properties of SIP sessions.
The <media-type> element identifies a specific media type. The value of this element MUST be the name of a media type, such as 'audio', 'video', 'text', or 'application'.
This element MAY have the q attribute (see Section 3.3).
If used in a session policy document inside a <media-types-allowed> element, the media types defined MAY be used in a session. If used in a session policy document inside a <media-types-excluded> element, the media types defined MUST NOT be used in a session.
The <codec> element identifies a specific codec. The content of this element MUST be a media type and subtype (e.g., audio/PCMA [RFC4856] or video/H263 [RFC4629]), possibly with parameters.
The <codec> element MAY have the q attribute (see Section 3.3).
If used in a session policy document inside a <codecs-allowed> element, the codec defined MAY be used in a session. If used in a session policy document inside a <codecs-excluded> element, the codec defined MUST NOT be used in a session.
The <codec> element MUST contain one <media-type-subtype> element and MAY contain multiple optional <mime-parameter> elements.
The <media-type-subtype> element contains a media type and subtype that identifies a codec. The value of this element MUST be a media type and subtype [RFC4855] separated by a "/" (e.g., audio/PCMA, audio/G726-16 [RFC4856] or video/H263 [RFC4629]).
The <mime-parameter> element may be needed for some codecs to identify a particular encoding or profile. The value of this element MUST be a name-value pair containing the name and the value of a media type parameter for the codec [RFC4855]. The name and value are separated by a "=". For example, the parameter "profile=0" can be used to specify a specific profile for the codec "video/H263-2000" [RFC4629].
The <max-bw> element defines the overall maximum bandwidth in kilobits per second an entity can/will use for media streams at any point in time. It defines an upper limit for the total bandwidth an entity can/will use for the transmission of media streams. The limit corresponds to the sum of the maximum session bandwidth of all sessions a UA may set up in parallel.
The bandwidth limit given in the <max-bw> element includes the bandwidth needed for lower-layer transport and network protocols (e.g., UDP and IP).
The <max-bw> element MAY have the direction attribute (see Section 3.3).
If used in a <session-policy> element, the <max-bw> element MAY also have the visibility attribute (see Section 3.3).
If the <max-bw> element occurs multiple times in a container element, each instance MUST apply to a different set of media streams (i.e., one <max-bw> element for outgoing and one for incoming streams).
The <max-session-bw> element defines the maximum bandwidth in kilobits per second an entity can/will use for media streams in the described session. It defines an upper limit for the total bandwidth of a single session. This limit corresponds to the sum of the maximum stream bandwidth of all media streams in a session.
The bandwidth limit given in the <max-session-bw> element includes the bandwidth needed for lower-layer transport and network protocols (e.g., UDP and IP).
The <max-session-bw> element MAY have the direction attribute (see Section 3.3).
If used in a <session-policy> element, the <max-session-bw> element MAY also have the visibility attribute (see Section 3.3).
If the <max-session-bw> element occurs multiple times in a container element, each instance MUST apply to a different set of media streams (i.e., one <max-session-bw> element for outgoing and one for incoming streams).
The <max-stream-bw> element defines the maximum bandwidth in kilobits per second an entity can/will use for each media stream in the described session.
The bandwidth limit given in the <max-stream-bw> element includes the bandwidth needed as encapsulated in IP (i.e., the RTP, UDP, and IP overheads are included).
The <max-stream-bw> element MAY have the direction and media-type attributes (see Section 3.3).
If used in a <session-policy> element, the <max-stream-bw> element MAY also have the visibility attribute (see Section 3.3).
If used in a <session-info> element, the <max-stream-bw> element MAY also have the label attribute.
The media-type attribute is used to define that the <max-stream-bw> element only applies to streams of a certain media type (e.g., audio streams).
The <max-stream-bw> element is used to define a bandwidth limit for a specific media stream. The use of this attribute requires that the <stream> element that represents the media stream to which this bandwidth limit applies also has a 'label' attribute. A <max-stream-bw> element with a 'label' attribute applies only to the stream element that has a 'label' attribute with the same value. If no matching <stream> element exists, then the <max-stream-bw> element MUST be ignored.
If the <max-stream-bw> element occurs multiple times in a container element, each instance MUST apply to a different set of media streams (i.e., one <max-stream-bw> element for outgoing and one for incoming streams).
The <qos-dscp> element contains an Differentiated Services Codepoint (DSCP) [RFC2474] value that should be used to populate the IP DS field of media packets. The <qos-dscp> contains a decimal integer value that represents a 6 bit field and therefore ranges from 0 to 63.
This element MAY have the direction and media-type attributes (see Section 3.3)).
If used in a <session-policy> element, the <qos-dscp> element MAY also have the visibility attribute (see Section 3.3).
The media-type attribute is used to specify that the <qos-dscp> element only applies to streams of a certain media type (e.g., audio streams).
The <qos-dscp> element is optional and MAY occur multiple times inside a container. If the <qos-dscp> element occurs multiple times, each instance MUST apply to a different media stream (i.e., one <qos-dscp> element for audio and one for video streams).
The <context> element provides context information about a session policy or session information document.
The <context> element MAY contain multiple <contact> and one <info> element.
If used in a <session-policy> element, the <context> element MAY also contain a <policy-server-URI> element.
If used in a <session-info> element, the <context> element MAY also contain a <request-URI> and a <token> element.
The <policy-server-URI> element contains the URI of the policy server that has issued this policy.
The <policy-server-URI> element is only permitted inside a <session-policy> element.
The <contact> element contains a URI which is a contact address (e.g., a SIP URI or mailto URI) by which a human representative of the issuer of this document can be reached.
The <info> element provides a short textual description of the policy or session that should be intelligible to the human user.
The <request-URI> element contains the request-URI of the dialog-initiating request of the session.
The <request-URI> element is only permitted inside a <session-info> element.
The <token> element provides a mechanism for a policy server to return an opaque string to a UA. Such a string is sometimes needed to construct a Policy-Id header which ensures that all policy requests concerning a single session are routed to the same policy server. The use of this token is described in the Framework for SIP Session Policies [I-D.ietf-sip-session-policy-framework]. Since the token value must be encodable as a SIP URI parameter value, it must consist of ASCII characters, that is, in the range U+0020 to U+007E.
The <token> element is only permitted inside a <session-info> element.
A number of additional elements have been proposed for a media property language. These elements are deemed to be outside the scope of this format. However, they may be defined in extensions of MPDF or other profile data sets.
The following example describes a session policy document that allows the use of audio and video and prohibits the use of other media types. It allows the use of any codec except G.723 and G.729.
<session-policy>
<context>
<policy-server-URI>policy@biloxi.example.com</policy-server-URI>
<contact>sip:policy_manager@example.com</contact>
<info>Access network policies</info>
</context>
<media-types-allowed>
<media-type>audio</media-type>
<media-type>video</media-type>
</media-types>
<codecs-excluded>
<codec><media-type-subtype>audio/G729</media-type-subtype></codec>
<codec><media-type-subtype>audio/G723</media-type-subtype></codec>
</codecs>
</session-policy>
The following examples contain session descriptions and the session information documents that represent these sessions.
In this example, a session info document is created based on one session description. This session info document would be created, for example, by a UA that has composed an offer and is now contacting a policy server.
Local SDP session description:
v=0 o=alice 2890844526 2890844526 IN IP4 host.somewhere.example s= c=IN IP4 host.somewhere.example t=0 0 m=audio 49562 RTP/AVP 0 1 3 a=rtpmap:0 PCMU/8000 a=rtpmap:1 1016/8000 a=rtpmap:3 GSM/8000 m=video 51234 RTP/AVP 31 34 a=rtpmap:31 H261/90000 a=rtpmap:34 H263/90000
MPDF document:
<session-info>
<context>
<contact>sip:alice@somewhere.example</contact>
<info>session information</info>
</context>
<streams>
<stream>
<media-type>audio</media-type>
<codec><media-type-subtype>audio/PCMU</media-type-subtype></codec>
<codec><media-type-subtype>audio/1016</media-type-subtype></codec>
<codec><media-type-subtype>audio/GSM</media-type-subtype></codec>
<local-host-port>host.somewhere.example:49562</local-host-port>
</stream>
<stream>
<media-type>video</media-type>
<codec><media-type-subtype>video/H261</media-type-subtype></codec>
<codec><media-type-subtype>video/H263</media-type-subtype></codec>
<local-host-port>host.somewhere.example:51234</local-host-port>
</stream>
</streams>
</session-info>
In this example, a session info document is created that represents two session descriptions (i.e., an offer and answer). This session info document would be created, for example, by a UA that has received an answer from another UA and is now contacting a policy server.
Local SDP session description:
v=0 o=alice 2890844526 2890844526 IN IP4 host.somewhere.example s= c=IN IP4 host.somewhere.example t=0 0 m=audio 49562 RTP/AVP 0 1 3 a=rtpmap:0 PCMU/8000 a=rtpmap:1 1016/8000 a=rtpmap:3 GSM/8000 m=video 51234 RTP/AVP 31 34 a=rtpmap:31 H261/90000 a=rtpmap:34 H263/90000
Remote SDP session description:
v=0 o=bob 2890844730 2890844730 IN IP4 host.anywhere.example s= c=IN IP4 host.anywhere.example t=0 0 m=audio 52124 RTP/AVP 0 3 a=rtpmap:0 PCMU/8000 a=rtpmap:3 GSM/8000 m=video 50286 RTP/AVP 31 a=rtpmap:31 H261/90000
MPDF document that represents the local and the remote session description:
<session-info>
<context>
<contact>sip:alice@somewhere.example</contact>
<info>session information</info>
</context>
<streams>
<stream>
<media-type>audio</media-type>
<codec><media-type-subtype>audio/PCMU</media-type-subtype></codec>
<codec><media-type-subtype>audio/GSM</media-type-subtype></codec>
<local-host-port>host.somewhere.example:49562</local-host-port>
<remote-host-port>host.anywhere.example:52124</remote-host-port>
</stream>
<stream>
<media-type>video</media-type>
<codec><media-type-subtype>video/H261</media-type-subtype></codec>
<local-host-port>host.somewhere.example:51234</local-host-port>
<remote-host-port>host.anywhere.example:50286</remote-host-port>
</stream>
</streams>
</session-info>
The following MPDF document is a modified version of the above document, which can be returned by a policy server. This document reflects a policy that defines a maximum session bandwidth of 192 kbit and a maximum bandwidth for the H261 video stream of 128 kbit.
<session-info>
<context>
<contact>sip:alice@somewhere.example</contact>
<info>modified session information</info>
</context>
<streams>
<stream label='1'>
<media-type>audio</media-type>
<codec><media-type-subtype>audio/PCMU</media-type-subtype></codec>
<codec><media-type-subtype>audio/GSM</media-type-subtype></codec>
<local-host-port>host.somewhere.example:49562</local-host-port>
<remote-host-port>host.anywhere.example:52124</remote-host-port>
</stream>
<stream label='2'>
<media-type>video</media-type>
<codec><media-type-subtype>video/H261</media-type-subtype></codec>
<local-host-port>host.somewhere.example:51234</local-host-port>
<remote-host-port>host.anywhere.example:50286</remote-host-port>
</stream>
</streams>
<max-stream-bw label='2'>128</max-stream-bw>
<max-session-bw>192</max-session-bw>
</session-info>
<?xml version="1.0"?>
<grammar xmlns="http://relaxng.org/ns/structure/1.0"
ns="urn:ietf:params:xml:ns:mediadataset"
datatypeLibrary="http://www.w3.org/2001/XMLSchema-datatypes">
<start>
<choice>
<element name="session-info">
<interleave>
<optional>
<ref name="ElementInfoContext"/>
</optional>
<optional>
<ref name="ElementStreams"/>
</optional>
<zeroOrMore>
<ref name="ElementMaxBandwidth"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMaxSessionBandwidth"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMaxStreamBandwidth"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMediaIntermediaries"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementQoSDSCP"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementAny"/>
</zeroOrMore>
</interleave>
</element>
<element name="session-policy">
<interleave>
<optional>
<ref name="ElementPolicyContext"/>
</optional>
<optional>
<ref name="ElementLocalPorts"/>
</optional>
<zeroOrMore>
<ref name="ElementMediaTypesAllowed"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMediaTypesExcluded"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementCodecsAllowed"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementCodecsExcluded"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMaxBandwidth"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMaxSessionBandwidth"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementMaxStreamBandwidth"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementQoSDSCP"/>
</zeroOrMore>
<zeroOrMore>
<ref name="ElementAny"/>
</zeroOrMore>
</interleave>
</element>
</choice>
</start>
<define name="ElementMediaTypesAllowed">
<element name="media-types-allowed">
<ref name="PolicyGeneralAttributes"/>
<zeroOrMore>
<ref name="ElementMediaType"/>
</zeroOrMore>
</element>
</define>
<define name="ElementMediaTypesExcluded">
<element name="media-types-excluded">
<ref name="PolicyGeneralAttributes"/>
<zeroOrMore>
<ref name="ElementMediaType"/>
</zeroOrMore>
</element>
</define>
<define name="ElementMediaType">
<element name="media-type">
<data type="string" />
<optional>
<ref name="AttributeQ"/>
</optional>
<optional>
<ref name="AttributeGeneric"/>
</optional>
</element>
</define>
<define name="ElementCodecsAllowed">
<element name="codecs-allowed">
<ref name="PolicyGeneralAttributes"/>
<zeroOrMore>
<ref name="ElementCodec"/>
</zeroOrMore>
</element>
</define>
<define name="ElementCodecsExcluded">
<element name="codecs-excluded">
<ref name="PolicyGeneralAttributes"/>
<zeroOrMore>
<ref name="ElementCodec"/>
</zeroOrMore>
</element>
</define>
<define name="ElementCodec">
<element name="codec">
<optional>
<ref name="AttributeQ"/>
</optional>
<optional>
<ref name="AttributeGeneric"/>
</optional>
<element name="media-type-subtype">
<data type="string" />
</element>
<zeroOrMore>
<element name="mime-parameter">
<data type="string" />
</element>
</zeroOrMore>
</element>
</define>
<define name="ElementStreams">
<element name="streams">
<optional>
<ref name="AttributeGeneric"/>
</optional>
<zeroOrMore>
<ref name="ElementStream"/>
</zeroOrMore>
</element>
</define>
<define name="ElementStream">
<element name="stream">
<optional>
<ref name="AttributeDirection"/>
</optional>
<optional>
<ref name="AttributeLabel"/>
</optional>
<optional>
<ref name="AttributeEnabled"/>
</optional>
<optional>
<ref name="AttributeGeneric"/>
</optional>
<ref name="ElementMediaType"/>
<oneOrMore>
<ref name="ElementCodec"/>
</oneOrMore>
<element name="local-host-port">
<data type="string" />
</element>
<optional>
<element name="remote-host-port">
<data type="string" />
</element>
</optional>
</element>
</define>
<define name="ElementMaxBandwidth">
<element name="max-bw">
<data type="integer" />
<ref name="PolicyGeneralAttributes"/>
</element>
</define>
<define name="ElementMaxSessionBandwidth">
<element name="max-session-bw">
<data type="integer" />
<ref name="PolicyGeneralAttributes"/>
</element>
</define>
<define name="ElementMaxStreamBandwidth">
<element name="max-stream-bw">
<data type="integer" />
<ref name="PolicyGeneralAttributes"/>
<optional>
<ref name="AttributeMediaType"/>
</optional>
<optional>
<ref name="AttributeLabel"/>
</optional>
</element>
</define>
<define name="ElementMediaIntermediaries">
<element name="media-intermediaries">
<ref name="PolicyGeneralAttributes"/>
<oneOrMore>
<choice>
<element name="fixed-intermediary">
<element name="int-host-port">
<data type="string" />
</element>
<zeroOrMore>
<element name="int-addl-port">
<data type="integer" />
</element>
</zeroOrMore>
</element>
<element name="turn-intermediary">
<element name="int-host-port">
<data type="string" />
</element>
<zeroOrMore>
<element name="int-addl-port">
<data type="integer" />
</element>
</zeroOrMore>
<zeroOrMore>
<element name="shared-secret">
<data type="string" />
</element>
</zeroOrMore>
</element>
</choice>
</oneOrMore>
</element>
</define>
<define name="ElementQoSDSCP">
<element name="qos-dscp">
<data type="integer" />
<ref name="PolicyGeneralAttributes"/>
<optional>
<ref name="AttributeMediaType"/>
</optional>
</element>
</define>
<define name="ElementLocalPorts">
<element name="local-ports">
<data type="string" />
<interleave>
<optional>
<ref name="AttributeVisibility"/>
</optional>
<optional>
<ref name="AttributeGeneric"/>
</optional>
</interleave>
</element>
</define>
<define name="ElementPolicyContext">
<element name="context">
<interleave>
<optional>
<element name="info">
<data type="string" />
</element>
</optional>
<optional>
<element name="policy-server-URI">
<data type="string" />
</element>
</optional>
<zeroOrMore>
<element name="contact">
<data type="string" />
</element>
</zeroOrMore>
</interleave>
</element>
</define>
<define name="ElementInfoContext">
<element name="context">
<interleave>
<optional>
<element name="info">
<data type="string" />
</element>
</optional>
<optional>
<element name="domain">
<data type="string" />
</element>
</optional>
<optional>
<element name="request-URI">
<data type="string" />
</element>
</optional>
<zeroOrMore>
<element name="contact">
<data type="string" />
</element>
</zeroOrMore>
</interleave>
</element>
</define>
<define name="PolicyGeneralAttributes">
<optional>
<ref name="AttributeVisibility"/>
</optional>
<optional>
<ref name="AttributeDirection"/>
</optional>
<optional>
<ref name="AttributeGeneric"/>
</optional>
</define>
<define name="AttributeVisibility">
<attribute name="visibility">
<choice>
<value>hidden</value>
<value>visible</value>
</choice>
</attribute>
</define>
<define name="AttributeDirection">
<attribute name="direction">
<choice>
<value>sendonly</value>
<value>recvonly</value>
<value>sendrecv</value>
</choice>
</attribute>
</define>
<define name="AttributeQ">
<attribute name="q">
<data type="decimal" />
</attribute>
</define>
<define name="AttributeMediaType">
<attribute name="media-type">
<data type="string" />
</attribute>
</define>
<define name="AttributeLabel">
<attribute name="label">
<data type="string" />
</attribute>
</define>
<define name="AttributeEnabled">
<attribute name="enabled">
<data type="boolean" />
</attribute>
</define>
<define name="AttributeGeneric">
<zeroOrMore>
<attribute>
<anyName>
<except>
<name ns="">visibility</name>
<name ns="">direction</name>
<name ns="">q</name>
<name ns="">media-type</name>
<name ns="">label</name>
<name ns="">enabled</name>
</except>
</anyName>
</attribute>
</zeroOrMore>
</define>
<define name="ElementAny">
<element>
<anyName>
<except>
<name>context</name>
<name>streams</name>
<name>max-bw</name>
<name>max-session-bw</name>
<name>max-stream-bw</name>
<name>media-intermediaries</name>
<name>qos-dscp</name>
<name>local-ports</name>
<name>media-types-allowed</name>
<name>media-types-excluded</name>
<name>media-type</name>
<name>codecs-allowed</name>
<name>codecs-excluded</name>
</except>
</anyName>
<ref name="anyExtension"/>
</element>
</define>
<define name="anyExtension">
<zeroOrMore>
<choice>
<element>
<anyName/>
<ref name="anyExtension"/>
</element>
<attribute>
<anyName/>
</attribute>
<text/>
</choice>
</zeroOrMore>
</define>
</grammar>
Session info and session policy information can be sensitive information. The protocol used to distribute session info and session policy documents SHOULD ensure privacy, message integrity and authentication. The use of [I-D.ietf-sipping-policy-package] to distribute session info and session policy document meets these requirements.
An attacker could attempt to modify session policy documents that were sent to a client so that their processing by the client would be more costly (e.g., in terms of merging policies). The attacker could also attempt to create its own fake policy documents and send them to the client with the same purpose or in order to get the client to comply with those face policies as part of a Denial of Service (DoS) attack. The protocol used to distribute session policy documents SHOULD ensure privacy, message integrity and authentication. The use of [I-D.ietf-sipping-policy-package] to distribute session policy document meets these requirements.
This document registers a new media type, application/media-policy-dataset+xml, and a new XML namespace.
Media type name: application
Media subtype name: media-policy-dataset+xml
Mandatory parameters: none
Optional parameters: Same as charset parameter application/xml as specified in RFC 3023 [RFC3023].
Encoding considerations: Same as encoding considerations of application/xml as specified in RFC 3023 [RFC3023].
Security considerations: See Section 10 of RFC 3023 [RFC3023] and Section 9 of this specification.
Interoperability considerations: none.
Published specification: This document.
Applications which use this media type: This document type has been used to convey media policy information between SIP user agents and a domain.
Additional Information:
Magic Number: None
File Extension: .mpf or .xml
Macintosh file type code: "TEXT"
Personal and email address for further information: Volker Hilt, <volkerh@bell-labs.com>
Intended usage: COMMON
Author/Change controller: The IETF.
This section registers a new XML namespace, as per the guidelines in [RFC3688]
URI: The URI for this namespace is urn:ietf:params:xml:schema:mediadataset.
Registrant Contact: IETF, SIPPING working group, <sipping@ietf.org>, Volker Hilt, <volkerh@bell-labs.com>
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
"http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="content-type"
content="text/html;charset=iso-8859-1"/>
<title>Media Policy Dataset Namespace</title>
</head>
<body>
<h1>Namespace for Media Policy Datasets</h1>
<h2>urn:ietf:params:xml:ns:mediadataset</h2>
<p>See <a href="[[[URL of published RFC]]]">RFCXXXX</a>.</p>
</body>
</html>
END
| [I-D.ietf-sip-session-policy-framework] | Camarillo, G, Rosenberg, J and V Hilt, "A Framework for Session Initiation Protocol (SIP) Session Policies", Internet-Draft draft-ietf-sip-session-policy-framework-10, February 2011. |
| [RFC2648] | Moats, R., "A URN Namespace for IETF Documents", RFC 2648, August 1999. |
| [RFC4856] | Casner, S., "Media Type Registration of Payload Formats in the RTP Profile for Audio and Video Conferences", RFC 4856, February 2007. |
| [RFC4629] | Ott, H.263Video.J., Bormann, C., Sullivan, G., Wenger, S. and R. Even, "RTP Payload Format for ITU-T Rec", RFC 4629, January 2007. |
| [RFC6080] | Petrie, D. and S. Channabasappa, "A Framework for Session Initiation Protocol User Agent Profile Delivery", RFC 6080, March 2011. |
| [RFC3261] | Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M. and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. |
Many thanks to Allison Mankin, Dan Petrie, Martin Dolly, Adam Roach and Ben Campbell for the discussions and suggestions. Many thanks to Roni Even and Mary Barnes for reviewing the draft and to Jari Urpalainen for helping with the Relax NG schema.