Network Working Group S. Nandakumar Internet-Draft Cisco Intended status: Standards Track November 26, 2014 Expires: May 30, 2015 A Framework for SDP Attributes when Multiplexing draft-ietf-mmusic-sdp-mux-attributes-05 Abstract The Session Description Protocol (SDP) provides mechanisms to describe attributes of multimedia sessions and of individual media streams (e.g., Real-time Transport Protocol (RTP) sessions) within a multimedia session. In the RTCWEB WG, there is a need to use a single 5-tuple for sending and receiving media associated with multiple media descriptions ("m=" lines). Such a requirement has raised concerns over the semantic implications of the SDP attributes associated with the RTP Media Streams multiplexed over a single underlying transport layer flow. The scope of this specification is to provide a framework for analyzing the multiplexing characteristics of SDP attributes. This specification also categorizes the existing SDP attributes based on the framework described herein. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on May 30, 2015. Copyright Notice Copyright (c) 2014 IETF Trust and the persons identified as the document authors. All rights reserved. Nandakumar Expires May 30, 2015 [Page 1] Internet-Draft SDP Attribute Multiplexing November 2014 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . 6 4. SDP Attribute Analysis Framework . . . . . . . . . . . . . . 6 4.1. Category: NORMAL . . . . . . . . . . . . . . . . . . . . 7 4.2. Category: NOT RECOMMENDED . . . . . . . . . . . . . . . . 7 4.3. Category: IDENTICAL . . . . . . . . . . . . . . . . . . . 8 4.4. Category: SUM . . . . . . . . . . . . . . . . . . . . . . 8 4.5. Category: TRANSPORT . . . . . . . . . . . . . . . . . . . 9 4.6. Category: INHERIT . . . . . . . . . . . . . . . . . . . . 10 4.7. Category: IDENTICAL-PER-PT . . . . . . . . . . . . . . . 10 4.8. Category: SPECIAL . . . . . . . . . . . . . . . . . . . . 11 4.9. Category: TBD . . . . . . . . . . . . . . . . . . . . . . 11 5. Analysis of Existing Attributes . . . . . . . . . . . . . . . 12 5.1. RFC4566 - SDP: Session Description Protocol . . . . . . . 12 5.2. RFC4585 - RTP/AVPF . . . . . . . . . . . . . . . . . . . 14 5.3. RFC5761 - Multiplexing RTP and RTCP . . . . . . . . . . . 14 5.4. RFC3312 - Integration of Resource Management and (SIP) . 14 5.5. RFC4574 - SDP Label Attribute . . . . . . . . . . . . . . 15 5.6. RFC5432 - QoS Mechanism Selection in SDP . . . . . . . . 15 5.7. RFC4568 - SDP Security Descriptions . . . . . . . . . . . 16 5.8. RFC5762 - RTP over DCCP . . . . . . . . . . . . . . . . . 16 5.9. RFC6773 - DCCP-UDP Encapsulation . . . . . . . . . . . . 17 5.10. RFC5506 - Reduced-Size RTCP in RTP Profile . . . . . . . 18 Nandakumar Expires May 30, 2015 [Page 2] Internet-Draft SDP Attribute Multiplexing November 2014 5.11. RFC6787 - Media Resource Control Protocol Version 2 . . . 18 5.12. RFC5245 - Interactive Connectivity Establishment (ICE) . 19 5.13. RFC5285 - RTP Header Extensions . . . . . . . . . . . . . 21 5.14. RFC3605 - RTCP attribute in SDP . . . . . . . . . . . . . 21 5.15. RFC5576 - Source-Specific SDP Attributes . . . . . . . . 21 5.16. RFC7273 - RTP Clock Source Signalling . . . . . . . . . . 22 5.17. RFC6236 - Image Attributes in SDP . . . . . . . . . . . . 23 5.18. RFC7197 - Duplication Delay Attribute in SDP . . . . . . 23 5.19. RFC7266 - RTCP XR Blocks for MOS Metric Reporting . . . 23 5.20. RFC6285 - Rapid Acquisition of Multicast RTP Sessions . . 24 5.21. RFC6230 - Media Control Channel Framework . . . . . . . . 24 5.22. RFC6364 - SDP Elements for FEC Framework . . . . . . . . 25 5.23. RFC4796 - Content Attribute . . . . . . . . . . . . . . . 25 5.24. RFC3407 - SDP Simple Capability Declaration . . . . . . . 26 5.25. RFC6284 - Port Mapping between Unicast and Multicast RTP Sessions . . . . . . . . . . . . . . . . . . . . . . . . 26 5.26. RFC6714 - MSRP-CEMA . . . . . . . . . . . . . . . . . . . 27 5.27. RFC4583 - SDP Format for BFCP Streams . . . . . . . . . . 27 5.28. RFC5547 - SDP Offer/Answer for File Transfer . . . . . . 28 5.29. RFC6849 - SDP and RTP Media Loopback Extension . . . . . 28 5.30. RFC5760 - RTCP with Unicast Feedback . . . . . . . . . . 29 5.31. RFC3611 - RTCP XR . . . . . . . . . . . . . . . . . . . . 29 5.32. RFC5939 - SDP Capability Negotiation . . . . . . . . . . 29 5.33. RFC6871- SDP Media Capabilities Negotiation . . . . . . . 30 5.34. RFC7006 - Miscellaneous Capabilities Negotiation SDP . . 31 5.35. RFC4567 - Key Management Extensions for SDP and RTSP . . 32 5.36. RFC4572 - Comedia over TLS in SDP . . . . . . . . . . . . 33 5.37. RFC4570 - SDP Source Filters . . . . . . . . . . . . . . 33 5.38. RFC6128 - RTCP Port for Multicast Sessions . . . . . . . 34 5.39. RFC6189 - ZRTP . . . . . . . . . . . . . . . . . . . . . 34 5.40. RFC4145 - Connection-Oriented Media . . . . . . . . . . . 35 5.41. RFC6947 - The SDP ALTC Attribute . . . . . . . . . . . . 35 5.42. RFC7195 - SDP Extension for Circuit Switched Bearers in PSTN . . . . . . . . . . . . . . . . . . . . . . . . . 35 5.43. RFC7272 - IDMS Using the RTP Control Protocol (RTCP) . . 36 5.44. RFC5159 - OMA BCAST SDP Attributes . . . . . . . . . . . 36 5.45. RFC6193 - Media Description for IKE in SDP . . . . . . . 37 5.46. RFC2326 - Real Time Streaming Protocol . . . . . . . . . 38 5.47. RFC6064 - SDP and RTSP Extensions for 3GPP . . . . . . . 38 5.48. RFC3108 - ATM SDP . . . . . . . . . . . . . . . . . . . . 41 5.49. 3GPP TS 26.114 . . . . . . . . . . . . . . . . . . . . . 42 5.50. 3GPP TS 183.063 . . . . . . . . . . . . . . . . . . . . . 43 5.51. 3GPP TS 24.182 . . . . . . . . . . . . . . . . . . . . . 43 5.52. 3GPP TS 24.183 . . . . . . . . . . . . . . . . . . . . . 44 5.53. 3GPP TS 24.229 . . . . . . . . . . . . . . . . . . . . . 44 5.54. ITU T.38 . . . . . . . . . . . . . . . . . . . . . . . . 45 5.55. ITU-T-REC.Q1970 . . . . . . . . . . . . . . . . . . . . . 46 5.56. ITU-T H.248.15 . . . . . . . . . . . . . . . . . . . . . 47 Nandakumar Expires May 30, 2015 [Page 3] Internet-Draft SDP Attribute Multiplexing November 2014 5.57. RFC4975 - The Message Session Relay Protocol . . . . . . 47 5.58. Historical Attributes . . . . . . . . . . . . . . . . . . 48 6. bwtype Attribute Analysis . . . . . . . . . . . . . . . . . . 48 6.1. RFC4566 - SDP: Session Description Protocol . . . . . . . 48 6.2. RFC3556 - SDP Bandwidth Modifiers for RTCP Bandwidth . . 49 6.3. RFC3890 - Bandwidth Modifier for SDP . . . . . . . . . . 49 7. rtcp-fb Attribute Analysis . . . . . . . . . . . . . . . . . 50 7.1. RFC4585 - RTP/AVPF . . . . . . . . . . . . . . . . . . . 50 7.2. RFC5104 - Codec Control Messages in AVPF . . . . . . . . 51 7.3. RFC6285 - Unicast-Based RAMS . . . . . . . . . . . . . . 52 7.4. RFC6679 - ECN for RTP over UDP/IP . . . . . . . . . . . . 52 7.5. RFC6642 - Third-Party Loss Report . . . . . . . . . . . . 53 7.6. RFC5104 - Codec Control Messages in AVPF . . . . . . . . 54 8. group Attribute Analysis . . . . . . . . . . . . . . . . . . 54 8.1. RFC5888 - SDP Grouping Framework . . . . . . . . . . . . 54 8.2. RFC3524 - Mapping Media Streams to Resource Reservation Flows . . . . . . . . . . . . . . . . . . . . 55 8.3. RFC4091 - ANAT Semantics . . . . . . . . . . . . . . . . 55 8.4. RFC5956 - FEC Grouping Semantics in SDP . . . . . . . . . 55 8.5. RFC5583 - Signaling Media Decoding Dependency in SDP . . 56 8.6. RFC7104 - Duplication Grouping Semantics in the SDP . . 56 9. ssrc-group Attribute Analysis . . . . . . . . . . . . . . . . 57 9.1. RFC5576 - Source-Specific SDP Attributes . . . . . . . . 57 9.2. RFC7104 - Duplication Grouping Semantics in the SDP . . . 57 10. QoS Mechanism Token Analysis . . . . . . . . . . . . . . . . 57 10.1. RFC5432 - QoS Mechanism Selection in SDP . . . . . . . . 57 11. k= Attribute Analysis . . . . . . . . . . . . . . . . . . . . 58 11.1. RFC4566 SDP: Session Description Protocol . . . . . . . 58 12. content Attribute Analysis . . . . . . . . . . . . . . . . . 58 12.1. RFC4796 . . . . . . . . . . . . . . . . . . . . . . . . 58 13. Payload Formats . . . . . . . . . . . . . . . . . . . . . . . 59 13.1. RFC5109 - RTP Payload Format for Generic FEC . . . . . . 59 14. Multiplexing Considerations for Encapsulating Attributes . . 59 14.1. RFC3407 - cpar Attribute Analysis . . . . . . . . . . . 60 14.2. RFC5939 Analysis . . . . . . . . . . . . . . . . . . . . 60 14.2.1. Recommendation - Procedures for Potential Configuration Pairing . . . . . . . . . . . . . . . 61 14.2.1.1. Example: Transport Capability Multiplexing . . . 62 14.2.1.2. Example: Attribute Capability Multiplexing . . . 63 14.3. RFC6871 Analysis . . . . . . . . . . . . . . . . . . . . 64 14.3.1. Recommendation: Dealing with Payload Type Numbers . 64 14.3.1.1. Example: Attribute Capability Under Shared Payload Type . . . . . . . . . . . . . . . . . . 64 14.3.2. Recommendation: Dealing with Latent Configurations . 65 15. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 66 15.1. New 'Multiplexing Categories' subregistry . . . . . . . 66 15.2. 'Mux Category' column for subregistries . . . . . . . . 67 15.2.1. Table: SDP bwtype . . . . . . . . . . . . . . . . . 67 Nandakumar Expires May 30, 2015 [Page 4] Internet-Draft SDP Attribute Multiplexing November 2014 15.2.2. Table: att-field (session level) . . . . . . . . . . 67 15.2.3. Table: att-field (both session and media level) . . 68 15.2.4. Table: att-field (media level only) . . . . . . . . 70 15.2.5. Table: att-field (source level) . . . . . . . . . . 73 15.2.6. Table: content SDP Parameters . . . . . . . . . . . 73 15.2.7. Table: Semantics for the 'group' SDP Attribute . . . 74 15.2.8. Table: 'rtcp-fb' Attribute Values . . . . . . . . . 74 15.2.9. Table: 'ack' and 'nack' Attribute Values . . . . . . 75 15.2.10. Table: 'depend' SDP Attribute Values . . . . . . . . 75 15.2.11. Table: 'cs-correlation' Attribute Values . . . . . . 75 15.2.12. Table: Semantics for the 'ssrc-group' SDP Attribute 76 15.2.13. Table: SDP/RTSP key management protocol identifiers 76 15.2.14. Table: Codec Control Messages . . . . . . . . . . . 76 15.2.15. Table: QoS Mechanism Tokens . . . . . . . . . . . . 77 15.2.16. Table: SDP Capability Negotiation Option Tags . . . 77 15.2.17. Table: Timestamp Reference Clock Source Parameters . 77 15.2.18. Table: Media Clock Source Parameters . . . . . . . . 78 16. Security Considerations . . . . . . . . . . . . . . . . . . . 78 17. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 78 18. Change Log . . . . . . . . . . . . . . . . . . . . . . . . . 79 19. References . . . . . . . . . . . . . . . . . . . . . . . . . 81 19.1. Normative References . . . . . . . . . . . . . . . . . . 81 19.2. Informative References . . . . . . . . . . . . . . . . . 81 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 88 1. Introduction Real-Time Communication in WEB-browsers (Rtcweb) framework requires Real-time Transport Protocol (RTP) as the media transport protocol and Session Description Protocol (SDP) [RFC4566] for describing and negotiating multi-media communication sessions. SDP defines several attributes for capturing characteristics that apply to the individual media descriptions (described by "m=" lines") and the overall multimedia session. Typically different media types (audio, video etc) described using different media descriptions represent separate RTP Sessions that are carried over individual transport layer flows. However in the IETF RTCWEB WG, a need to use a single 5-tuple for sending and receiving media associated with multiple SDP media descriptions ("m=" lines) has been identified. This would for e.g. allow the usage of a single set of Interactive Connectivity Establishment (ICE) [RFC5245] candidates for multiple media descriptions. This in turn has made necessary to understand the interpretation and usage of the SDP attributes defined for the multiplexed media descriptions. Given the number of SDP attributes registered with the [IANA] and possibility of new attributes being defined in the future, there is Nandakumar Expires May 30, 2015 [Page 5] Internet-Draft SDP Attribute Multiplexing November 2014 need for generic future-proof framework to analyze these attributes for their applicability in the transport multiplexing use-cases. The document starts with providing the motivation for requiring such a framework. This is followed by introduction to the SDP attribute analysis framework/procedures, following which several sections applies the framework to the SDP attributes registered with the [IANA]. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Motivation The time and complications of setting up ICE [RFC5245] and DTLS-SRTP [RFC5763] transports for use by RTP, and conservation of ports, forms an requirement to try and reduce the number of transport level flows needed. This has resulted in the definition of ways, such as, [I-D.ietf-mmusic-sdp-bundle-negotiation] to multiplex RTP over a single transport flow in order to preserve network resources such as port numbers. This imposes further restrictions on applicability of these SDP attributes as they are defined today. The specific problem is that there are attribute combinations which make sense when specified on independent "m= " lines -- as with classical SDP -- that do not make sense when those "m=" lines are then multiplexed over the same transport. To give an obvious example, ICE permits each "m=" line to have an independently specified ice-ufrag attribute. However, if the media from multiple "m=" lines is multiplexed over the same ICE component, then the meaning of media-level ice-ufrag attributes becomes muddled. As of today there are close to 250 SDP attributes registered with the [IANA] and more will be added in the future. There is no clearly defined procedure to establish the validity/applicability of these attribute when used with transport multiplexing. 4. SDP Attribute Analysis Framework Attributes in an SDP session description can be defined at the session-level and media-level. These attributes could be semantically grouped as noted below. o Attributes related to media content such as media type, encoding schemes, payload types. Nandakumar Expires May 30, 2015 [Page 6] Internet-Draft SDP Attribute Multiplexing November 2014 o Attributes specifying media transport characteristics like RTP/ RTCP port numbers, network addresses, QOS. o Metadata description attributes capturing session timing and origin information. o Attributes establishing relationships between media streams such as grouping framework With the above semantic grouping as a reference, the proposed framework classifies each attribute into one of the following categories: 4.1. Category: NORMAL Attributes that can be independently specified when multiplexing and retain their original semantics. In the example given below, the direction and label attributes are independently specified for audio and video m=lines. These attributes are not impacted by multiplexing these media streams over a single transport layer flow. v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 m=audio 49172 RTP/AVP 99 a=sendonly a=label:1 a=rtpmap:99 iLBC/8000 m=video 49172 RTP/AVP 31 a=recvonly a=label:2 a=rtpmap:31 H261/90000 4.2. Category: NOT RECOMMENDED Attributes that are recommended against multiplexing since their usage under multiplexing might lead to incorrect behavior. Example: Multiplexing media descriptions having attribute zrtp-hash defined with the media descriptions lacking it, would either complicate the handling of multiplexed streams or might fail multiplexing altogether. Nandakumar Expires May 30, 2015 [Page 7] Internet-Draft SDP Attribute Multiplexing November 2014 v=0 o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com s= c=IN IP4 client.biloxi.example.com t=0 0 m=audio 3456 RTP/AVP 97 // with zrtp a=rtpmap:97 iLBC/8000 a=zrtp-hash:1.10 fe30efd02423cb054e50efd0248742ac7a52c8f91bc2 df881ae642c371ba46df m=video 34567 RTP/AVP 31 //without zrtp a=rtpmap:31 H261/90000 4.3. Category: IDENTICAL Attributes that MUST be identical across all the media descriptions being multiplexed. Attributes such as rtcp-mux fall into this category. Since RTCP reporting is done per RTP Session, RTCP Multiplexing MUST be enabled for both the audio and video m=lines if they are transported over a single 5-tuple. v=0 o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com s= c=IN IP4 client.biloxi.example.com t=0 0 m=audio 34567 RTP/AVP 97 a=rtcp-mux m=video 34567 RTP/AVP 31 a=rtpmap:31 H261/90000 a=rtcp-mux 4.4. Category: SUM Attributes can be set as they are normally used but software using them in the multiplexing scenario, MUST apply the sum of all the attributes being multiplexed instead of trying to use them independently. This is typically used for bandwidth or other rate limiting attributes to the underlying transport. The software parsing the SDP sample below, should use the aggregate Application Specific (AS) bandwidth value from the individual media descriptions to determine the AS value for the multiplexed session. Thus the calculated AS value would be 256+64 bytes for the given example. Nandakumar Expires May 30, 2015 [Page 8] Internet-Draft SDP Attribute Multiplexing November 2014 v=0 o=test 2890844526 2890842807 IN IP4 126.16.64.4 c=IN IP4 client.biloxi.example.com t=0 0 m=audio 49170 RTP/AVP 0 b=AS:64 m=video 51372 RTP/AVP 31 b=AS:256 4.5. Category: TRANSPORT Attributes that can be set normally for multiple items in a multiplexed group but the software MUST pick just one of the attribute of the given type for use. The one chosen is the attribute associated with the "m=" line that represents the information being used for the transport of the RTP. In the example below, "a=crypto" attribute is defined for both the audio and the video m=lines. The video media line's a=crypto attribute is chosen since its mid value (bar) appears first in the a=group:BUNDLE line. This is due to BUNDLE grouping semantic [I-D.ietf-mmusic-sdp-bundle-negotiation] which mandates the values from m=line corresponding to the mid appearing first on the a=group:BUNDLE line to be considered for setting up the RTP Transport. v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 a=group:BUNDLE bar foo m=audio 49172 RTP/AVP 99 a=mid:foo a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:d0RmdmcmVCspeEc3QGZiNWpVLFJhQX1cfHAwJSoj|2^20|1:32 a=rtpmap:99 iLBC/8000 m=video 51374 RTP/AVP 31 a=mid:bar a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:EcGZiNWpFJhQXdspcl1ekcmVCNWpVLcfHAwJSoj|2^20|1:32 a=rtpmap:96 H261/90000 Nandakumar Expires May 30, 2015 [Page 9] Internet-Draft SDP Attribute Multiplexing November 2014 4.6. Category: INHERIT Attributes that encapsulate other SDP attributes or parameters. These attributes inherit their multiplexing characteristics from the attributes or parameters they encapsulate. Such attributes as of today, are defined in [RFC3407], [RFC5939] and [RFC6871] as part of a generic framework for indicating and negotiating transport, media and media format related capabilities in the SDP. The inheritance manifests itself when the encapsulated attribute or parameter is being leveraged. In the case of SDP Capability Negotiation [RFC5939] for example, this occurs when a capability (encapsulating attribute) is used as part of a configuration; the configuration inherits the multiplexing category of each of its constituent (encapsulated) attributes and parameters. This in turn may place constraints on what constitutes a valid configuration from a multiplexing point of view, e.g. because some attributes must be IDENTICAL (see Section 14 for further details). v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 m=video 3456 RTP/AVP 100 a=rtpmap:100 VP8/90000 a=fmtp:100 max-fr=30;max-fs=8040 a=sqn: 0 a=cdsc: 1 video RTP/AVP 100 a=cpar: a=rtcp-mux m=video 3456 RTP/AVP 101 a=rtpmap:101 VP8/90000 a=fmtp:100 max-fr=15;max-fs=1200 a=cdsc: 2 video RTP/AVP 101 a=cpar: a=rtcp-mux In the above example , the category IDENTICAL is inherited for the cpar encapsulated rtcp-mux attribute. 4.7. Category: IDENTICAL-PER-PT Attributes that define the RTP payload configuration on per Payload Type basis and MUST have identical values across all the media descriptions for a given RTP Payload Type when repeated. These Payload Types identify the same codec configuration as defined in the Section 10.1.2 of [I-D.ietf-mmusic-sdp-bundle-negotiation] under this context. Nandakumar Expires May 30, 2015 [Page 10] Internet-Draft SDP Attribute Multiplexing November 2014 In the SDP example below, Payload Types 96 and 97 are repeated across all the video m= lines and all the payload specific parameters (ex: rtpmap, fmtp) are identical. v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 a=group:BUNDLE cam1, cam2 m = video 96 97 a=mid:cam1 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42400d; max-fs=3600; max-fps=3000; max-mbps=108000; max-br=1000 a=rtpmap:97 H264/90000 a=fmtp:97 profile-level-id=42400a; max-fs=240; max-fps=3000; max-mbps=7200; max-br=200 m = video 96 97 a=mid:cam2 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42400d; max-fs=3600; max-fps=3000; max-mbps=108000; max-br=1000 a=rtpmap:97 H264/90000 a=fmtp:97 profile-level-id=42400a; max-fs=240; max-fps=3000; max-mbps=7200; max-br=200 4.8. Category: SPECIAL Attributes where the text in the source draft must be consulted for further handling when multiplexed. As an example, for the attribute extmap, the specification defining the extension MUST be referred to understand the multiplexing implications. 4.9. Category: TBD Attributes that have not been analyzed under the proposed multiplexing framework yet. For the purposes of implementations it is advised to consider "NOT RECOMMENDED" as the category when multiplexing these attributes. Nandakumar Expires May 30, 2015 [Page 11] Internet-Draft SDP Attribute Multiplexing November 2014 5. Analysis of Existing Attributes This section analyzes attributes listed in [IANA], grouped under the IETF document that defines them. The "Level" column indicates whether the attribute is currently specified as: o S -- Session level o M -- Media level o B -- Both o SR -- Source-level (for a single SSRC) The "Mux Category" column identifies multiplexing category assigned per attribute and the "Notes" column captures additional informative details regarding the assigned category, wherever necessary. 5.1. RFC4566 - SDP: Session Description Protocol [RFC4566] defines the Session Description Protocol (SDP) that is intended for describing multimedia sessions for the purposes of session announcement, session invitation, and other forms of multimedia session initiation. +-----------------+---------------------+-------+-------------------+ | Attr Name | Notes | Level | Mux Category | +-----------------+---------------------+-------+-------------------+ | sendrecv | Not impacted | B | NORMAL | | | | | | | sendonly | Not impacted | B | NORMAL | | | | | | | recvonly | Not impacted | B | NORMAL | | | | | | | inactive | Not impacted | B | NORMAL | | | | | | | cat | Not impacted | S | NORMAL | | | | | | | ptime | The attribute value | M | IDENTICAL-PER-PT | | | must be same for a | | | | | given codec | | | | | configuration | | | | | | | | | maxptime | The attribute value | M | IDENTICAL-PER-PT | | | must be same for a | | | | | given codec | | | Nandakumar Expires May 30, 2015 [Page 12] Internet-Draft SDP Attribute Multiplexing November 2014 | | configuration | | | | | | | | | orient | Not Impacted | M | NORMAL | | | | | | | framerate | The attribute value | M | IDENTICAL-PER-PT | | | must be same for a | | | | | given codec | | | | | configuration | | | | | | | | | quality | Not Impacted | M | NORMAL | | | | | | | rtpmap | The attribute value | M | IDENTICAL-PER-PT | | | must be same for a | | | | | given codec | | | | | configuration | | | | | | | | | fmtp | The attribute value | M | IDENTICAL-PER-PT | | | must be same for a | | | | | given codec | | | | | configuration | | | | | | | | | keywds | Not impacted | S | NORMAL | | | | | | | type | Not Impacted | S | NORMAL | | | | | | | type:broadcast | Not Impacted | S | NORMAL | | | | | | | type:H332 | Not Impacted | S | NORMAL | | | | | | | type:meeting | Not Impacted | S | NORMAL | | | | | | | type:moderated | Not Impacted | S | NORMAL | | | | | | | type:test | Not Impacted | S | NORMAL | | | | | | | tool | Not Impacted | S | NORMAL | | | | | | | charset | Not Impacted | S | NORMAL | | | | | | | sdplang | Not Impacted | B | NORMAL | | | | | | | lang | Not Impacted | B | NORMAL | | | | | | +-----------------+---------------------+-------+-------------------+ RFC4566 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 13] Internet-Draft SDP Attribute Multiplexing November 2014 5.2. RFC4585 - RTP/AVPF [RFC4585] defines an extension to the Audio-visual Profile (AVP) that enables receivers to provide, statistically, more immediate feedback to the senders and thus allows for short-term adaptation and efficient feedback-based repair mechanisms to be implemented. +----------+----------------------------+-------+-------------------+ | Attr | Notes | Level | Mux Category | | Name | | | | +----------+----------------------------+-------+-------------------+ | rtcp-fb | Since RTCP feedback | M | IDENTICAL-PER-PT | | | attributes are Payload | | | | | Type (PT) scoped, their | | | | | values MUST be identical | | | | | for a given PT across the | | | | | multiplexed m=lines. | | | | | | | | +----------+----------------------------+-------+-------------------+ RFC4585 Attribute Analysis 5.3. RFC5761 - Multiplexing RTP and RTCP [RFC5761] discusses issues that arise when multiplexing RTP data packets and RTP Control Protocol (RTCP) packets on a single UDP port. It describes when such multiplexing is and is not appropriate, and it explains how the Session Description Protocol (SDP) can be used to signal multiplexed sessions. +-----------+----------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-----------+----------------------------------+-------+------------+ | rtcp-mux | RTP and RTCP Multiplexing | M | IDENTICAL | | | affects the entire RTP Session | | | | | | | | +-----------+----------------------------------+-------+------------+ RFC5761 Attribute Analysis 5.4. RFC3312 - Integration of Resource Management and (SIP) [RFC3312] defines a generic framework for preconditions, which are extensible through IANA registration. This document also discusses how network quality of service can be made a precondition for establishment of sessions initiated by the Session Initiation Nandakumar Expires May 30, 2015 [Page 14] Internet-Draft SDP Attribute Multiplexing November 2014 Protocol (SIP). These preconditions require that the participant reserve network resources before continuing with the session. +-------+-----------------------+-------+------------------+ | Name | Notes | Level | Mux Category | +-------+-----------------------+-------+------------------+ | des | Refer to notes below | M | NOT RECOMMENDED | | | | | | | conf | Refer to notes below | M | NOT RECOMMENDED | | | | | | | curr | Refer to notes below | M | NOT RECOMMENDED | | | | | | +-------+-----------------------+-------+------------------+ RFC3312 Attribute Analysis A mismatched set of preconditions across media descriptions results in Session establishment failures due to inability in meeting the right resource reservations requested. 5.5. RFC4574 - SDP Label Attribute [RFC4574] defines a new Session Description Protocol (SDP) media- level attribute: "label". The "label" attribute carries a pointer to a media stream in the context of an arbitrary network application that uses SDP. The sender of the SDP document can attach the "label" attribute to a particular media stream or streams. The application can then use the provided pointer to refer to each particular media stream in its context. +--------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +--------+---------------+-------+--------------+ | label | Not Impacted | M | NORMAL | | | | | | +--------+---------------+-------+--------------+ RFC4574 Attribute Analysis 5.6. RFC5432 - QoS Mechanism Selection in SDP [RFC5432] defines procedures to negotiate QOS mechanisms using the Session Description Protocol (SDP) offer/answer model. Nandakumar Expires May 30, 2015 [Page 15] Internet-Draft SDP Attribute Multiplexing November 2014 +----------------+------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +----------------+------------------------+-------+--------------+ | qos-mech-send | Refer to notes below | B | NORMAL | | | | | | | qos-mech-recv | Refer to notes below. | B | NORMAL | | | | | | +----------------+------------------------+-------+--------------+ RFC5432 Attribute Analysis A single DSCP code point per flow being multiplexed doesn't impact multiplexing since QOS mechanisms are signaled/scoped per flow. For scenarios that involves having different DSCP code points for packets being transmitted over the same 5-tuple, issues as discussed in [I.D-draft-ietf-dart-dscp-rtp] needs to be taken into consideration. 5.7. RFC4568 - SDP Security Descriptions [RFC4568] defines a Session Description Protocol (SDP) cryptographic attribute for unicast media streams. The attribute describes a cryptographic key and other parameters that serve to configure security for a unicast media stream in either a single message or a roundtrip exchange. +---------+------------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +---------+------------------------------------+-------+------------+ | crypto | crypto attribute must be the one | M | TRANSPORT | | | that corresponds to the "m=" line | | | | | chosen for setting up the | | | | | underlying transport flow | | | | | | | | +---------+------------------------------------+-------+------------+ RFC4568 Attribute Analysis 5.8. RFC5762 - RTP over DCCP The Real-time Transport Protocol (RTP) is a widely used transport for real-time multimedia on IP networks. The Datagram Congestion Control Protocol (DCCP) is a transport protocol that provides desirable services for real-time applications. [RFC5762] specifies a mapping of RTP onto DCCP, along with associated signaling, such that real- time applications can make use of the services provided by DCCP. Nandakumar Expires May 30, 2015 [Page 16] Internet-Draft SDP Attribute Multiplexing November 2014 +--------------------+---------------------+---------+--------------+ | Name | Notes | Current | Mux Category | +--------------------+---------------------+---------+--------------+ | dccp-service-code | If RFC6773 is not | M | NOT | | | being used in | | RECOMMENDED | | | addition to | | | | | RFC5762, the port | | | | | in the "m=" line is | | | | | a DCCP port. DCCP | | | | | being a connection | | | | | oriented protocol, | | | | | does not allow | | | | | multiple | | | | | connections on the | | | | | same 5-tuple. | | | | | | | | +--------------------+---------------------+---------+--------------+ RFC5762 Attribute Analysis If RFC6773 is being used in addition to RFC5762 and provided that DCCP-in-UDP layer has additional demultiplexing, then it may be possible to use different DCCP service codes for each DCCP flow, given each uses a different DCCP port. Although doing so might conflict with the media type of the "m=" line. None of this is standardized yet and it wouldn't work as explained. Hence multiplexing MUST NOT be performed even in this alternate scenario. 5.9. RFC6773 - DCCP-UDP Encapsulation [RFC6773] document specifies an alternative encapsulation of the Datagram Congestion Control Protocol (DCCP), referred to as DCCP-UDP. This encapsulation allows DCCP to be carried through the current generation of Network Address Translation (NAT) middle boxes without modification of those middle boxes. +------------+-------------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+-------------------------------+-------+--------------+ | dccp-port | Multiplexing MUST NOT be | M | NOT | | | performed due to potential | | RECOMMENDED | | | conflict between the port | | | | | used for DCCP | | | | | en/decapsulation and the RTP. | | | | | | | | +------------+-------------------------------+-------+--------------+ RFC6773 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 17] Internet-Draft SDP Attribute Multiplexing November 2014 Since RFC6773 is about tunneling DCCP in UDP, with the UDP port being the port of the DCCP en-/de-capsulation service. This encapsulation allows arbitrary DCCP packets to be encapsulated and the DCCP port chosen MAY conflict with the port chosen for the RTP traffic. For multiplexing several DCCP-in-UDP encapsulations on the same UDP port, with no RTP traffic on the same port implies collapsing several DCCP port spaces together. This MAY or MAY NOT work depending on the nature of DCCP encapsulations and ports choses thus rendering it to be very application dependent. 5.10. RFC5506 - Reduced-Size RTCP in RTP Profile [RFC5506] discusses benefits and issues that arise when allowing Real-time Transport Protocol (RTCP) packets to be transmitted with reduced size. +-------------+--------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-------------+--------------------------------+-------+------------+ | rtcp-rsize | Reduced size RTCP affects the | M | IDENTICAL | | | entire RTP Session | | | | | | | | +-------------+--------------------------------+-------+------------+ RFC5506 Attribute Analysis 5.11. RFC6787 - Media Resource Control Protocol Version 2 The Media Resource Control Protocol Version 2 (MRCPv2) allows client hosts to control media service resources such as speech synthesizers, recognizers, verifiers, and identifiers residing in servers on the network. MRCPv2 is not a "stand-alone" protocol -- it relies on other protocols, such as the Session Initiation Protocol (SIP), to coordinate MRCPv2 clients and servers and manage sessions between them, and the Session Description Protocol (SDP) to describe, discover, and exchange capabilities. It also depends on SIP and SDP to establish the media sessions and associated parameters between the media source or sink and the media server. Once this is done, the MRCPv2 exchange operates over the control session established above, allowing the client to control the media processing resources on the speech resource server. [RFC6787] defines attributes for this purpose. Nandakumar Expires May 30, 2015 [Page 18] Internet-Draft SDP Attribute Multiplexing November 2014 +-----------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +-----------+---------------+-------+--------------+ | resource | Not Impacted | M | NORMAL | | | | | | | channel | Not Impacted | M | NORMAL | | | | | | | cmid | Not Impacted | M | NORMAL | | | | | | +-----------+---------------+-------+--------------+ RFC6787 Attribute Analysis 5.12. RFC5245 - Interactive Connectivity Establishment (ICE) [RFC5245] describes a protocol for Network Address Translator(NAT) traversal for UDP-based multimedia sessions established with the offer/answer model. This protocol is called Interactive Connectivity Establishment (ICE). ICE makes use of the Session Traversal Utilities for NAT (STUN) protocol and its extension,Traversal Using Relay NAT (TURN). ICE can be used by any protocol utilizing the offer/answer model, such as the Session Initiation Protocol (SIP). Nandakumar Expires May 30, 2015 [Page 19] Internet-Draft SDP Attribute Multiplexing November 2014 +--------------------+-------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +--------------------+-------------------------+-------+------------+ | ice-lite | Not Impacted | S | NORMAL | | | | | | | ice-options | Not Impacted | S | NORMAL | | | | | | | ice-mismatch | Not Impacted | S | NORMAL | | | | | | | ice-pwd | ice-pwd MUST be the one | B | TRANSPORT | | | that corresponds to the | | | | | m=line chosen for | | | | | setting up the | | | | | underlying transport | | | | | flow | | | | | | | | | ice-ufrag | ice-ufrag MUST be the | B | TRANSPORT | | | one that corresponds to | | | | | the m=line chosen for | | | | | setting up the | | | | | underlying transport | | | | | flow | | | | | | | | | candidate | ice candidate MUST be | M | TRANSPORT | | | the one that | | | | | corresponds to the | | | | | m=line chosen for | | | | | setting up the | | | | | underlying transport | | | | | flow | | | | | | | | | remote-candidates | ice remote candidate | M | TRANSPORT | | | MUST be the one that | | | | | corresponds to the | | | | | m=line chosen for | | | | | setting up the | | | | | underlying transport | | | | | flow | | | | | | | | +--------------------+-------------------------+-------+------------+ RFC5245 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 20] Internet-Draft SDP Attribute Multiplexing November 2014 5.13. RFC5285 - RTP Header Extensions [RFC5285] provides a general mechanism to use the header extension feature of RTP (the Real-Time Transport Protocol). It provides the option to use a small number of small extensions in each RTP packet, where the universe of possible extensions is large and registration is de-centralized. The actual extensions in use in a session are signaled in the setup information for that session. +---------+-------------------------------------+-------+-----------+ | Name | Notes | Level | Mux | | | | | Category | +---------+-------------------------------------+-------+-----------+ | extmap | Specific RTP extension document | B | SPECIAL | | | MUST be referred | | | | | | | | +---------+-------------------------------------+-------+-----------+ RFC5285 Attribute Analysis 5.14. RFC3605 - RTCP attribute in SDP Originally, SDP assumed that RTP and RTCP were carried on consecutive ports. However, this is not always true when NATs are involved. [RFC3605] specifies an early mechanism to indicate the RTCP port. +-------+--------------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-------+--------------------------------------+-------+------------+ | rtcp | Identical attribute value MUST be | M | IDENTICAL | | | used since the RTCP port affects the | | | | | entire RTP session. | | | | | | | | +-------+--------------------------------------+-------+------------+ RFC3605 Attribute Analysis 5.15. RFC5576 - Source-Specific SDP Attributes [RFC5576] defines a mechanism to describe RTP media sources, which are identified by their synchronization source (SSRC) identifiers, in SDP, to associate attributes with these sources, and to express relationships among sources. It also defines several source-level attributes that can be used to describe properties of media sources. Nandakumar Expires May 30, 2015 [Page 21] Internet-Draft SDP Attribute Multiplexing November 2014 +----------------+----------------------+-------+-------------------+ | Name | Notes | Level | Mux Category | +----------------+----------------------+-------+-------------------+ | ssrc | Refer to Notes below | M | NORMAL | | | | | | | ssrc-group | Refer to section | M | NORMAL | | | Section 9 for | | | | | specific analysis of | | | | | the grouping | | | | | semantics | | | | | | | | | cname | Not Impacted | SR | NORMAL | | | | | | | previous-ssrc | Refer to notes below | SR | NORMAL | | | | | | | fmtp | The attribute value | SR | IDENTICAL-PER-PT | | | must be same for a | | | | | given codec | | | | | configuration | | | | | | | | +----------------+----------------------+-------+-------------------+ RFC5576 Attribute Analysis If SSRCs are repeated across m=lines being multiplexed, they MUST all represent the same underlying RTP Source. 5.16. RFC7273 - RTP Clock Source Signalling [RFC7273] specifies Session Description Protocol (SDP) signalling that identifies timestamp reference clock sources and SDP signalling that identifies the media clock sources in a multimedia session. +------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+---------------+-------+--------------+ | ts-refclk | Not Impacted | B | NORMAL | | | | | | | mediaclk | Not Impacted | B | NORMAL | | | | | | +------------+---------------+-------+--------------+ RFC7273 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 22] Internet-Draft SDP Attribute Multiplexing November 2014 5.17. RFC6236 - Image Attributes in SDP [RFC6236] proposes a new generic session setup attribute to make it possible to negotiate different image attributes such as image size. A possible use case is to make it possible for a low-end hand-held terminal to display video without the need to rescale the image,something that may consume large amounts of memory and processing power. The document also helps to maintain an optimal bitrate for video as only the image size that is desired by the receiver is transmitted. +------------+--------------------------+-------+-------------------+ | Name | Notes | Level | Mux Category | +------------+--------------------------+-------+-------------------+ | imageattr | The attribute value must | M | IDENTICAL-PER-PT | | | be same for a given | | | | | codec configuration | | | | | | | | +------------+--------------------------+-------+-------------------+ RFC6236 Attribute Analysis 5.18. RFC7197 - Duplication Delay Attribute in SDP [RFC7197] defines an attribute to indicate the presence of temporally redundant media streams and the duplication delay in the Session Description Protocol. +--------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +--------------------+---------------+-------+--------------+ | duplication-delay | Not Impacted | B | NORMAL | | | | | | +--------------------+---------------+-------+--------------+ RFC7197 Attribute Analysis 5.19. RFC7266 - RTCP XR Blocks for MOS Metric Reporting [RFC7266] defines an RTP Control Protocol (RTCP) Extended Report (XR) Block including two new segment types and associated Session Description Protocol (SDP) parameters that allow the reporting of mean opinion score (MOS) Metrics for use in a range of RTP applications. Nandakumar Expires May 30, 2015 [Page 23] Internet-Draft SDP Attribute Multiplexing November 2014 +-------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +-------------+---------------+-------+--------------+ | calgextmap | Not Impacted | B | NORMAL | | | | | | +-------------+---------------+-------+--------------+ RFC7266 Attribute Analysis 5.20. RFC6285 - Rapid Acquisition of Multicast RTP Sessions [RFC6285] describes a method using the existing RTP and RTP Control Protocol (RTCP) machinery that reduces the acquisition delay. In this method, an auxiliary unicast RTP session carrying the Reference Information to the receiver precedes or accompanies the multicast stream. This unicast RTP flow can be transmitted at a faster than natural bitrate to further accelerate the acquisition. The motivating use case for this capability is multicast applications that carry real-time compressed audio and video. +---------------+-------------------+-------+------------------+ | Name | Notes | Level | Mux Category | +---------------+-------------------+-------+------------------+ | rams-updates | Not recommended | M | NOT RECOMMENDED | | | | | | +---------------+-------------------+-------+------------------+ RFC6285 Attribute Analysis 5.21. RFC6230 - Media Control Channel Framework [RFC6230] describes a framework and protocol for application deployment where the application programming logic and media processing are distributed. This implies that application programming logic can seamlessly gain access to appropriate resources that are not co-located on the same physical network entity. The framework uses the Session Initiation Protocol (SIP) to establish an application-level control mechanism between application servers and associated external servers such as media servers. +---------+-----------------+-------+--------------+ | Name | Notes | Level | Mux Category | +---------+-----------------+-------+--------------+ | cfw-id | Not Applicable | M | NORMAL | | | | | | +---------+-----------------+-------+--------------+ RFC6230 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 24] Internet-Draft SDP Attribute Multiplexing November 2014 5.22. RFC6364 - SDP Elements for FEC Framework [RFC6364] specifies the use of the Session Description Protocol (SDP) to describe the parameters required to signal the Forward Error Correction (FEC) Framework Configuration Information between the sender(s) and receiver(s). This document also provides examples that show the semantics for grouping multiple source and repair flows together for the applications that simultaneously use multiple instances of the FEC Framework. +------------------+-----------------------------+-------+----------+ | Name | Notes | Level | Mux | | | | | Category | +------------------+-----------------------------+-------+----------+ | fec-source-flow | Specific FEC scheme | M | SPECIAL | | | document needs to be | | | | | referred | | | | | | | | | fec-repair-flow | Specific FEC scheme | M | SPECIAL | | | document needs to be | | | | | referred | | | | | | | | | repair-window | Specific FEC scheme | M | SPECIAL | | | document needs to be | | | | | referred | | | | | | | | +------------------+-----------------------------+-------+----------+ RFC6364 Attribute Analysis 5.23. RFC4796 - Content Attribute [RFC4796] defines a new Session Description Protocol (SDP) media- level attribute, 'content'. The 'content' attribute defines the content of the media stream to a more detailed level than the media description line. The sender of an SDP session description can attach the 'content' attribute to one or more media streams. The receiving application can then treat each media stream differently (e.g., show it on a big or small screen) based on its content. +----------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +----------+---------------+-------+--------------+ | content | Not Impacted | M | NORMAL | | | | | | +----------+---------------+-------+--------------+ RFC4796 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 25] Internet-Draft SDP Attribute Multiplexing November 2014 5.24. RFC3407 - SDP Simple Capability Declaration [RFC3407] defines a set of Session Description Protocol (SDP) attributes that enables SDP to provide a minimal and backwards compatible capability declaration mechanism. +----------+------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +----------+------------------------+-------+--------------+ | sqn | Not Impacted | B | NORMAL | | | | | | | cdsc | Not Impacted. | B | NORMAL | | | | | | | cpar | Refer to Section 14 | B | INHERIT | | | | | | | cparmin | Refer to notes below | B | SPECIAL | | | | | | | cparmax | Refer to notes below | B | SPECIAL | | | | | | +----------+------------------------+-------+--------------+ RFC3407 Attribute Analysis Since the attributes (a=cparmin and a=cparmax) define minimum and maximum numerical values associated with the attributes described in a=cpar, it is recommended to consult the document defining the attribute. 5.25. RFC6284 - Port Mapping between Unicast and Multicast RTP Sessions [RFC6284] presents a port mapping solution that allows RTP receivers to choose their own ports for an auxiliary unicast session in RTP applications using both unicast and multicast services. The solution provides protection against denial-of-service or packet amplification attacks that could be used to cause one or more RTP packets to be sent to a victim client. +------------------+-------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------------+-------------------------+-------+--------------+ | portmapping-req | Not recommended, if | M | NOT | | | port mapping is | | RECOMMENDED | | | required by the | | | | | application | | | | | | | | +------------------+-------------------------+-------+--------------+ RFC6284 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 26] Internet-Draft SDP Attribute Multiplexing November 2014 5.26. RFC6714 - MSRP-CEMA [RFC6714] defines a Message Session Relay Protocol (MSRP) extension, Connection Establishment for Media Anchoring (CEMA). Support of this extension is OPTIONAL. The extension allows middle boxes to anchor the MSRP connection, without the need for middle boxes to modify the MSRP messages; thus, it also enables secure end-to-end MSRP communication in networks where such middle boxes are deployed. This document also defines a Session Description Protocol (SDP) attribute, 'msrp-cema', that MSRP endpoints use to indicate support of the CEMA extension. +------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+---------------+-------+--------------+ | msrp-cema | Not Impacted | M | NORMAL | | | | | | +------------+---------------+-------+--------------+ RFC6714 Attribute Analysis 5.27. RFC4583 - SDP Format for BFCP Streams [RFC4583] document specifies how to describe Binary Floor Control Protocol (BFCP) streams in Session Description Protocol (SDP) descriptions. User agents using the offer/answer model to establish BFCP streams use this format in their offers and answers. +------------+---------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +------------+---------------------------------+-------+------------+ | floorctrl | Must be repeated across all the | M | IDENTICAL | | | multiplexed m=lines | | | | | | | | | confid | Not Impacted | M | NORMAL | | | | | | | userid | Not Impacted | M | NORMAL | | | | | | | floorid | The floorid MUST be globally | M | NORMAL | | | unique | | | | | | | | +------------+---------------------------------+-------+------------+ RFC4583 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 27] Internet-Draft SDP Attribute Multiplexing November 2014 5.28. RFC5547 - SDP Offer/Answer for File Transfer [RFC5547] provides a mechanism to negotiate the transfer of one or more files between two endpoints by using the Session Description Protocol (SDP) offer/answer model specified in [RFC3264]. +----------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +----------------------+---------------+-------+--------------+ | file-selector | Not Impacted | M | NORMAL | | | | | | | file-transfer-id | Not Impacted | M | NORMAL | | | | | | | file-disposition | Not Impacted | M | NORMAL | | | | | | | file-date | Not Impacted | M | NORMAL | | | | | | | file-iconfile-range | Not Impacted | M | NORMAL | | | | | | +----------------------+---------------+-------+--------------+ RFC5547 Attribute Analysis 5.29. RFC6849 - SDP and RTP Media Loopback Extension [RFC6849] adds new SDP media types and attributes, which enable establishment of media sessions where the media is looped back to the transmitter. Such media sessions will serve as monitoring and troubleshooting tools by providing the means for measurement of more advanced VoIP, Real-time Text and Video over IP performance metrics. +---------------------------+----------------+-------+--------------+ | Name | Notes | Level | Mux Category | +---------------------------+----------------+-------+--------------+ | loopback rtp-pkt-loopback | Not Impacted | M | NORMAL | | | | | | | loopback rtp-media- | Not Impacted | M | NORMAL | | loopback | | | | | | | | | | loopback-source | Not Impacted | M | NORMAL | | | | | | | loopback-mirror | Not Impacted | M | NORMAL | | | | | | +---------------------------+----------------+-------+--------------+ RFC6849 Analysis Nandakumar Expires May 30, 2015 [Page 28] Internet-Draft SDP Attribute Multiplexing November 2014 5.30. RFC5760 - RTCP with Unicast Feedback [RFC5760] specifies an extension to the Real-time Transport Control Protocol (RTCP) to use unicast feedback to a multicast sender. The proposed extension is useful for single-source multicast sessions such as Source-Specific Multicast (SSM) communication where the traditional model of many-to-many group communication is either not available or not desired. +---------------+------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +---------------+------------------------------+-------+------------+ | rtcp-unicast | The attribute MUST be | M | IDENTICAL | | | reported across all m=lines | | | | | multiplexed | | | | | | | | +---------------+------------------------------+-------+------------+ RFC5760 Attribute Analysis 5.31. RFC3611 - RTCP XR [RFC3611] defines the Extended Report (XR) packet type for the RTP Control Protocol (RTCP), and defines how the use of XR packets can be signaled by an application if it employs the Session Description Protocol (SDP). +----------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +----------+---------------+-------+--------------+ | rtcp-xr | Not Impacted | B | NORMAL | | | | | | +----------+---------------+-------+--------------+ RFC3611 Attribute Analysis 5.32. RFC5939 - SDP Capability Negotiation [RFC5939] defines a general SDP Capability Negotiation framework. It also specifies how to provide attributes and transport protocols as capabilities and negotiate them using the framework. Extensions for other types of capabilities (e.g., media types and media formats) may be provided in other documents. Nandakumar Expires May 30, 2015 [Page 29] Internet-Draft SDP Attribute Multiplexing November 2014 +---------+-------------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +---------+-------------------------------+-------+--------------+ | pcfg | Refer to Section Section 14 | M | SPECIAL | | | | | | | acfg | Refer to Section Section 14 | M | SPECIAL | | | | | | | csup | Not Impacted | B | NORMAL | | | | | | | creq | Not Impacted | B | NORMAL | | | | | | | acap | Refer to section Section 14 | B | INHERIT | | | | | | | tcap | Refer to section Section 14 | B | INHERIT | | | | | | | cap-v0 | Not Impacted | B | NORMAL | | | | | | +---------+-------------------------------+-------+--------------+ RFC5939 Attribute Analysis 5.33. RFC6871- SDP Media Capabilities Negotiation Session Description Protocol (SDP) capability negotiation provides a general framework for indicating and negotiating capabilities in SDP. The base framework defines only capabilities for negotiating transport protocols and attributes. [RFC6871] extends the framework by defining media capabilities that can be used to negotiate media types and their associated parameters. Nandakumar Expires May 30, 2015 [Page 30] Internet-Draft SDP Attribute Multiplexing November 2014 +---------+-----------------------------+-------+-------------------+ | Name | Notes | Level | Mux Category | +---------+-----------------------------+-------+-------------------+ | rmcap | Refer to Section Section 14 | B | IDENTICAL-PER-PT | | | | | | | omcap | Not Impacted | B | NORMAL | | | | | | | mfcap | Refer to Section Section 14 | B | IDENTICAL-PER-PT | | | | | | | mscap | Refer to Section Section 14 | B | INHERIT | | | | | | | lcfg | Refer to Section Section 14 | B | SPECIAL | | | | | | | sescap | Refer to notes below | S | NOT RECOMMENDED | | | | | | | med-v0 | Not Impacted | S | NORMAL | | | | | | +---------+-----------------------------+-------+-------------------+ RFC6871 - Attribute Analysis The "sescap" attribute is NOT RECOMMENDED for use with multiplexing. The reason is that it requires the use of unique configuration numbers across the entire SDP (per [RFC6871]) as opposed to within a media description only (per [RFC5939]). As described in Section 14, the use of identical configuration numbers between multiplexed (bundled) media descriptions is the default way of indicating compatible configurations in a bundle. 5.34. RFC7006 - Miscellaneous Capabilities Negotiation SDP [RFC7006] extends the SDP capability negotiation framework to allow endpoints to negotiate three additional SDP capabilities. In particular, this memo provides a mechanism to negotiate bandwidth ("b=" line), connection data ("c=" line), and session or media titles ("i=" line for each session or media). Nandakumar Expires May 30, 2015 [Page 31] Internet-Draft SDP Attribute Multiplexing November 2014 +----------+-----------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +----------+-----------------------------------+-------+------------+ | bcap | Inherit the category SUM as | B | INHERIT | | | applicable to b= attribute | | | | | | | | | bcap-v0 | Not Impacted | B | NORMAL | | | | | | | ccap | The connection address type MUST | B | IDENTICAL | | | be identical across all the | | | | | multiplexed m= lines. | | | | | | | | | ccap-v0 | Not Impacted. | B | NORMAL | | | | | | | icap | Not Impacted | B | NORMAL | | | | | | | icap-v0 | Not Impacted | B | NORMAL | | | | | | +----------+-----------------------------------+-------+------------+ RFC7006 - Attribute Analysis 5.35. RFC4567 - Key Management Extensions for SDP and RTSP [RFC4567] defines general extensions for Session Description Protocol (SDP) and Real Time Streaming Protocol (RTSP) to carry messages, as specified by a key management protocol, in order to secure the media. These extensions are presented as a framework, to be used by one or more key management protocols. As such, their use is meaningful only when complemented by an appropriate key management protocol. +-----------+----------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-----------+----------------------------------+-------+------------+ | key-mgmt | Key management protocol MUST be | B | IDENTICAL | | | identical across all the m=lines | | | | | | | | | mikey | Key management protocol MUST be | B | IDENTICAL | | | identical across all the m=lines | | | | | | | | +-----------+----------------------------------+-------+------------+ RFC4567 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 32] Internet-Draft SDP Attribute Multiplexing November 2014 5.36. RFC4572 - Comedia over TLS in SDP [RFC4572] specifies how to establish secure connection-oriented media transport sessions over the Transport Layer Security (TLS) protocol using the Session Description Protocol (SDP). It defines a new SDP protocol identifier, 'TCP/TLS'. It also defines the syntax and semantics for an SDP 'fingerprint' attribute that identifies the certificate that will be presented for the TLS session. This mechanism allows media transport over TLS connections to be established securely, so long as the integrity of session descriptions is assured. +--------------+-------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +--------------+-------------------------------+-------+------------+ | fingerprint | fingerprint value from the | B | TRANSPORT | | | m=line defining the | | | | | underlying transport is | | | | | chosen | | | | | | | | +--------------+-------------------------------+-------+------------+ RFC4572 Attribute Analysis 5.37. RFC4570 - SDP Source Filters [RFC4570] describes how to adapt the Session Description Protocol (SDP) to express one or more source addresses as a source filter for one or more destination "connection" addresses. It defines the syntax and semantics for an SDP "source-filter" attribute that may reference either IPv4 or IPv6 address(es) as either an inclusive or exclusive source list for either multicast or unicast destinations. In particular, an inclusive source-filter can be used to specify a Source-Specific Multicast (SSM) session. +----------------+-----------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +----------------+-----------------------------+-------+------------+ | source-filter | The attribute MUST be | B | IDENTICAL | | | repeated across all m=lines | | | | | multiplexed | | | | | | | | +----------------+-----------------------------+-------+------------+ RFC4570 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 33] Internet-Draft SDP Attribute Multiplexing November 2014 5.38. RFC6128 - RTCP Port for Multicast Sessions The Session Description Protocol (SDP) has an attribute that allows RTP applications to specify an address and a port associated with the RTP Control Protocol (RTCP) traffic. In RTP-based source-specific multicast (SSM) sessions, the same attribute is used to designate the address and the RTCP port of the Feedback Target in the SDP description. However, the RTCP port associated with the SSM session itself cannot be specified by the same attribute to avoid ambiguity, and thus, is required to be derived from the "m=" line of the media description. Deriving the RTCP port from the "m=" line imposes an unnecessary restriction. [RFC6128] removes this restriction by introducing a new SDP attribute. +-----------------+----------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-----------------+----------------------------+-------+------------+ | multicast-rtcp | Multicast RTCP port MUST | B | IDENTICAL | | | be identical across all | | | | | the m=lines | | | | | | | | +-----------------+----------------------------+-------+------------+ RFC6128 Attribute Analysis 5.39. RFC6189 - ZRTP [RFC6189] defines ZRTP, a protocol for media path Diffie-Hellman exchange to agree on a session key and parameters for establishing unicast Secure Real-time Transport Protocol (SRTP) sessions for Voice over IP (VoIP) applications. +------------+-------------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+-------------------------------+-------+--------------+ | zrtp-hash | Complicates if all the | M | NOT | | | m=lines are not authenticated | | RECOMMENDED | | | as given in the example below | | | | | | | | +------------+-------------------------------+-------+--------------+ RFC6189 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 34] Internet-Draft SDP Attribute Multiplexing November 2014 5.40. RFC4145 - Connection-Oriented Media [RFC4145] describes how to express media transport over TCP using the Session Description Protocol (SDP). It defines the SDP 'TCP' protocol identifier, the SDP 'setup' attribute, which describes the connection setup procedure, and the SDP 'connection' attribute, which handles connection reestablishment. +-------------+--------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-------------+--------------------------------+-------+------------+ | setup | MUST be identical across all | B | IDENTICAL | | | m=lines | | | | | | | | | connection | MUST be identical across all | B | IDENTICAL | | | m=lines | | | | | | | | +-------------+--------------------------------+-------+------------+ RFC4145 Attribute Analysis 5.41. RFC6947 - The SDP ALTC Attribute [RFC6947] proposes a mechanism that allows the same SDP offer to carry multiple IP addresses of different address families (e.g., IPv4 and IPv6). The proposed attribute, the "altc" attribute, solves the backward-compatibility problem that plagued Alternative Network Address Types (ANAT) due to their syntax. +-------+--------------------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-------+--------------------------------------+-------+------------+ | altc | The IP Address and port must be the | M | TRANSPORT | | | one that corresponds to the m=line | | | | | chosen for setting up the underlying | | | | | transport flow. | | | | | | | | +-------+--------------------------------------+-------+------------+ RFC6947 Attribute Analysis 5.42. RFC7195 - SDP Extension for Circuit Switched Bearers in PSTN [RFC7195] describes use cases, requirements, and protocol extensions for using the Session Description Protocol (SDP) offer/answer model Nandakumar Expires May 30, 2015 [Page 35] Internet-Draft SDP Attribute Multiplexing November 2014 for establishing audio and video media streams over circuit-switched bearers in the Public Switched Telephone Network (PSTN). +--------------------------+----------------+-------+--------------+ | Name | Notes | Level | Mux Category | +--------------------------+----------------+-------+--------------+ | cs-correlation:callerid | Not Impacted. | M | NORMAL | | | | | | | cs-correlation:uuie | Not Impacted. | M | NORMAL | | | | | | | cs-correlation:dtmf | Not Impacted. | M | NORMAL | | | | | | | cs-correlation:external | Not Impacted. | M | NORMAL | | | | | | +--------------------------+----------------+-------+--------------+ RFC7195 Attribute Analysis 5.43. RFC7272 - IDMS Using the RTP Control Protocol (RTCP) [RFC7272] defines a new RTP Control Protocol (RTCP) Packet Type and an RTCP Extended Report (XR) Block Type to be used for achieving Inter-Destination Media Synchronization (IDMS). +------------+----------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+----------------+-------+--------------+ | rtcp-idms | Not Impacted. | M | NORMAL | | | | | | +------------+----------------+-------+--------------+ RFC7272 Attribute Analysis 5.44. RFC5159 - OMA BCAST SDP Attributes [RFC5159] provides descriptions of Session Description Protocol (SDP) attributes used by the Open Mobile Alliance's Broadcast Service and Content Protection specification. Nandakumar Expires May 30, 2015 [Page 36] Internet-Draft SDP Attribute Multiplexing November 2014 +---------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +---------------------+---------------+-------+--------------+ | bcastversion | Not Impacted | S | NORMAL | | | | | | | stkmstream | Not Impacted | B | NORMAL | | | | | | | SRTPAuthentication | Not Impacted | M | NORMAL | | | | | | | SRTPROCTxRate | Not Impacted | M | NORMAL | | | | | | +---------------------+---------------+-------+--------------+ RFC5159 Attribute Analysis 5.45. RFC6193 - Media Description for IKE in SDP [RFC6193] specifies how to establish a media session that represents a virtual private network using the Session Initiation Protocol for the purpose of on-demand media/application sharing between peers. It extends the protocol identifier of the Session Description Protocol (SDP) so that it can negotiate use of the Internet Key Exchange Protocol (IKE) for media sessions in the SDP offer/answer model. +-------------------+--------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +-------------------+--------------------------+-------+------------+ | ike-setup | Attribute MUST be | B | IDENTICAL | | | identical across all the | | | | | m=lines | | | | | | | | | psk-fingerprint | Attribute MUST be | B | IDENTICAL | | | identical across all the | | | | | m=lines | | | | | | | | | ike-esp | Attribute MUST be | B | IDENTICAL | | | identical across all the | | | | | m=lines | | | | | | | | | ike-esp-udpencap | Attribute MUST be | B | IDENTICAL | | | identical across all the | | | | | m=lines | | | | | | | | +-------------------+--------------------------+-------+------------+ RFC6193 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 37] Internet-Draft SDP Attribute Multiplexing November 2014 With the above SDP constraints, a session multiplexed with multiple m=lines will use only one IPSec association for all of the m= lines. 5.46. RFC2326 - Real Time Streaming Protocol The Real Time Streaming Protocol, or RTSP, is an application-level protocol for control over the delivery of data with real-time properties. RTSP provides an extensible framework to enable controlled, on-demand delivery of real-time data, such as audio and video. +----------+---------------------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +----------+---------------------------------+-------+--------------+ | etag | RTSP is not supported for RTP | B | NOT | | | Stream multiplexing | | RECOMMENDED | | | | | | | range | RTSP is not supported for RTP | B | NOT | | | Stream multiplexing | | RECOMMENDED | | | | | | | control | RTSP is not supported for RTP | B | NOT | | | Stream multiplexing | | RECOMMENDED | | | | | | | mtag | RTSP is not supported for RTP | B | NOT | | | Stream multiplexing | | RECOMMENDED | | | | | | +----------+---------------------------------+-------+--------------+ RFC2326 Attribute Analysis 5.47. RFC6064 - SDP and RTSP Extensions for 3GPP The Packet-switched Streaming Service (PSS) and the Multimedia Broadcast/Multicast Service (MBMS) defined by 3GPP use the Session Description Protocol (SDP) and Real Time Streaming Protocol (RTSP) with some extensions. [RFC6064] provides information about these extensions and registers the RTSP and SDP extensions with IANA. +-------------------------------+------------+-------+--------------+ | Name | Notes | Level | Mux Category | +-------------------------------+------------+-------+--------------+ | X-predecbufsize | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | X-initpredecbufperiod | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | Nandakumar Expires May 30, 2015 [Page 38] Internet-Draft SDP Attribute Multiplexing November 2014 | | | | | | X-initpostdecbufperiod | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | X-decbyterate | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3gpp-videopostdecbufsize | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | framesize | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-Integrity-Key | Refer to | S | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-SDP-Auth | Refer to | S | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-SRTP-Config | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | alt | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | alt-default-id | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | alt-group | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-Adaptation-Support | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-Asset-Information | Refer to | B | NOT | | | notes | | RECOMMENDED | | | below | | | Nandakumar Expires May 30, 2015 [Page 39] Internet-Draft SDP Attribute Multiplexing November 2014 | | | | | | mbms-mode | Refer to | B | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | mbms-flowid | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | mbms-repair | Refer to | B | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics | Refer to | M | NOT | | | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Corruption | Refer to | M | NOT | | duration | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Rebuffering | Refer to | M | NOT | | duration | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Initial | Refer to | M | NOT | | buffering duration | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Successive | Refer to | M | NOT | | loss of RTP packets | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Frame rate | Refer to | M | NOT | | deviation | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Jitter | Refer to | M | NOT | | duration | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Content | Refer to | B | NOT | | Switch Time | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Average | Refer to | M | NOT | | Codec Bitrate | notes | | RECOMMENDED | | | below | | | Nandakumar Expires May 30, 2015 [Page 40] Internet-Draft SDP Attribute Multiplexing November 2014 | | | | | | 3GPP-QoE-Metrics:Codec | Refer to | M | NOT | | Information | notes | | RECOMMENDED | | | below | | | | | | | | | 3GPP-QoE-Metrics:Buffer | Refer to | M | NOT | | Status | notes | | RECOMMENDED | | | below | | | | | | | | +-------------------------------+------------+-------+--------------+ RFC6064 Attribute Analysis [RFC6064] defines SDP attributes that are applicable in the declarative usage of SDP alone. For purposes of this document, only the Offer/Answer usage of SDP is considered as mandated by [I-D.ietf-mmusic-sdp-bundle-negotiation]. 5.48. RFC3108 - ATM SDP RFC3108 [RFC3108] describes conventions for using the Session Description Protocol (SDP) described for controlling ATM Bearer Connections, and any associated ATM Adaptation Layer (AAL). +------------------------+--------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------------------+--------------+-------+--------------+ | aalType | Not Impacted | B | NORMAL | | eecid | Not Impacted | B | NORMAL | | aalType | Not Impacted | B | NORMAL | | capability | Not Impacted | B | NORMAL | | qosClass | Not Impacted | B | NORMAL | | bcob | Not Impacted | B | NORMAL | | stc | Not Impacted | B | NORMAL | | upcc | Not Impacted | B | NORMAL | | atmQOSparms | Not Impacted | B | NORMAL | | atmTrfcDesc | Not Impacted | B | NORMAL | | abrParms | Not Impacted | B | NORMAL | | abrSetup | Not Impacted | B | NORMAL | | bearerType | Not Impacted | B | NORMAL | | lij | Not Impacted | B | NORMAL | | anycast | Not Impacted | B | NORMAL | | cache | Not Impacted | B | NORMAL | | bearerSigIE | Not Impacted | B | NORMAL | | aalApp | Not Impacted | B | NORMAL | | cbrRate | Not Impacted | B | NORMAL | | sbc | Not Impacted | B | NORMAL | | clkrec | Not Impacted | B | NORMAL | Nandakumar Expires May 30, 2015 [Page 41] Internet-Draft SDP Attribute Multiplexing November 2014 | fec | Not Impacted | B | NORMAL | | prtfl | Not Impacted | B | NORMAL | | structure | Not Impacted | B | NORMAL | | cpsSDUsize | Not Impacted | B | NORMAL | | aal2CPS | Not Impacted | B | NORMAL | | aal2CPSSDUrate | Not Impacted | B | NORMAL | | aal2sscs3661unassured | Not Impacted | B | NORMAL | | aal2sscs3661assured | Not Impacted | B | NORMAL | | aal2sscs3662 | Not Impacted | B | NORMAL | | aal5sscop | Not Impacted | B | NORMAL | | atmmap | Not Impacted | B | NORMAL | | silenceSupp | Not Impacted | B | NORMAL | | ecan | Not Impacted | B | NORMAL | | gc | Not Impacted | B | NORMAL | | profileDesc | Not Impacted | B | NORMAL | | vsel | Not Impacted | B | NORMAL | | dsel | Not Impacted | B | NORMAL | | fsel | Not Impacted | B | NORMAL | | onewaySel | Not Impacted | B | NORMAL | | codecconfig | Not Impacted | B | NORMAL | | isup_usi | Not Impacted | B | NORMAL | | uiLayer1_Prot | Not Impacted | B | NORMAL | | chain | Not Impacted | B | NORMAL | | | | | | +------------------------+--------------+-------+--------------+ RFC3108 Attribute Analysis RFC3108 describes conventions for using the Session Description Protocol (SDP) for characterizing ATM bearer connections using an AAL1, AAL2 or AAL5 adaptation layers. For AAL1, AAL2 and AAL5, bearer connections can be used to transport single media streams. In addition, for AAL1 and AAL2, multiple media streams may be multiplexed into a bearer connection. For all adaptation types (AAL1, AAL2 and AAL5), bearer connections may be bundled into a single media group. In all cases addressed by RFC3108, a real-time media stream (voice, video, voiceband data, pseudo-wire and others) or a multiplex of media streams is mapped directly into an ATM connection. RFC3108 does not address cases where ATM serves as a low-level transport pipe for IP packets which in turn may carry one or more real-time (e.g. VoIP) media sessions with a life-cycle different from that of the underlying ATM transport. 5.49. 3GPP TS 26.114 [R3GPPTS26.114] specifies IP multimedia subsystem: Media handling and interaction Nandakumar Expires May 30, 2015 [Page 42] Internet-Draft SDP Attribute Multiplexing November 2014 +----------------------+-------------------------+-------+----------+ | Name | Notes | Level | Mux | | | | | Category | +----------------------+-------------------------+-------+----------+ | 3gpp_sync_info | Usage defined for the | M | NORMAL | | | IP Multimedia Subsystem | | | | | | | | | 3gpp_MaxRecvSDUSize | Usage defined for the | M | NORMAL | | | IP Multimedia Subsystem | | | | | | | | +----------------------+-------------------------+-------+----------+ 3GPP TS 26.114 Attribute Analysis 5.50. 3GPP TS 183.063 [R3GPPTS183.063] Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); +---------------------+--------------+----------------+-------------+ | Name | Notes | Level | Mux | | | | | Category | +---------------------+--------------+----------------+-------------+ | PSCid | Not Impacted | Not-Applicable | NORMAL | | | | | | | bc_service | Not Impacted | Not-Applicable | NORMAL | | | | | | | bc_program | Not Impacted | Not-Applicable | NORMAL | | | | | | | bc_service_package | Not Impacted | Not-Applicable | NORMAL | | | | | | +---------------------+--------------+----------------+-------------+ 3GPP TS 183.063 Attribute Analysis 5.51. 3GPP TS 24.182 [R3GPPTS24.182] specifies IP multimedia subsystem Custom Alerting tones Nandakumar Expires May 30, 2015 [Page 43] Internet-Draft SDP Attribute Multiplexing November 2014 +-------------+---------------------------------+-------+-----------+ | Name | Notes | Level | Mux | | | | | Category | +-------------+---------------------------------+-------+-----------+ | g.3gpp.cat | Usage defined for the IP | M | NORMAL | | | Multimedia Subsystem | | | | | | | | +-------------+---------------------------------+-------+-----------+ 3GPP TS 24.182 Attribute Analysis 5.52. 3GPP TS 24.183 [R3GPPTS24.183] specifies IP multimedia subsystem Custom Ringing Signal +-------------+---------------------------------+-------+-----------+ | Name | Notes | Level | Mux | | | | | Category | +-------------+---------------------------------+-------+-----------+ | g.3gpp.crs | Usage defined for the IP | M | NORMAL | | | Multimedia Subsystem | | | | | | | | +-------------+---------------------------------+-------+-----------+ 3GPP TS 24.183 Attribute Analysis 5.53. 3GPP TS 24.229 [R3GPPTS24.229] specifies IP multimedia call control protocol based on Session Initial protocol and Session Description Protocol. Nandakumar Expires May 30, 2015 [Page 44] Internet-Draft SDP Attribute Multiplexing November 2014 +------------------+---------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +------------------+---------------------------+-------+------------+ | secondary-realm | secondary-realm must be | M | TRANSPORT | | | the one that corresponds | | | | | to the m=line chosen for | | | | | setting up the underlying | | | | | transport flow. | | | | | | | | | visited-realm | visited-realm must be | M | TRANSPORT | | | the one that corresponds | | | | | to the m=line chosen for | | | | | setting up the underlying | | | | | transport flow. | | | | | | | | | omr-m-cksum | Not Impacted | M | NORMAL | | | | | | | omr-s-cksum | Not Impacted | M | NORMAL | | | | | | | omr-m-att | Not Impacted | M | NORMAL | | | | | | | omr-s-att | Not Impacted | M | NORMAL | | | | | | | omr-m-bw | Not Impacted | M | NORMAL | | | | | | | omr-s-bw | Not Impacted | M | NORMAL | | | | | | | omr-codecs | Not Impacted | M | NORMAL | | | | | | +------------------+---------------------------+-------+------------+ 3GPP TS 24.229 Attribute Analysis 5.54. ITU T.38 [T.38] defines procedures for real-time Group 3 facsimile communications over IP networks. Nandakumar Expires May 30, 2015 [Page 45] Internet-Draft SDP Attribute Multiplexing November 2014 +------------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------------------+---------------+-------+--------------+ | T38FaxVersion | Not Impacted | S | NORMAL | | | | | | | T38MaxBitRate | Not Impacted | S | NORMAL | | | | | | | T38FaxFillBitRemoval | Not Impacted | S | NORMAL | | | | | | | T38FaxTranscodingMMR | Not Impacted | S | NORMAL | | | | | | | T38FaxTranscodingJBIG | Not Impacted | S | NORMAL | | | | | | | T38FaxRateManagement | Not Impacted | S | NORMAL | | | | | | | T38FaxMaxBuffer | Not Impacted | S | NORMAL | | | | | | | T38FaxMaxDatagram | Not Impacted | S | NORMAL | | | | | | | T38FaxUdpEC | Not Impacted | S | NORMAL | | | | | | | T38FaxMaxIFP | Not Impacted | S | NORMAL | | | | | | | T38FaxUdpECDepth | Not Impacted | S | NORMAL | | | | | | | T38FaxUdpFECMaxSpan | Not Impacted | S | NORMAL | | | | | | | T38ModemType | Not Impacted | S | NORMAL | | | | | | | T38VendorInfo | Not Impacted | S | NORMAL | | | | | | +------------------------+---------------+-------+--------------+ ITU T.38 Attribute Analysis The ITU T.38 attributes are clearly unaffected by multiplexing and are specific to the working of the fax protocol itself. 5.55. ITU-T-REC.Q1970 [ITU-T-REC.Q1970] defines BICC IP bearer control protocol. Nandakumar Expires May 30, 2015 [Page 46] Internet-Draft SDP Attribute Multiplexing November 2014 +--------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +--------+---------------+-------+--------------+ | ipbcp | Not Impacted | S | NORMAL | | | | | | +--------+---------------+-------+--------------+ ITU-T-REC.Q1970 Attribute Analysis 5.56. ITU-T H.248.15 ITU-T H.248.15 [H.248.15] defines Gateway Control Protocol SDP H.248 package attribute +-----------+------------------------------------+-------+----------+ | Name | Notes | Level | Mux | | | | | Category | +-----------+------------------------------------+-------+----------+ | h248item | It is only applicable for | B | SPECIAL | | | signaling the inclusion of H.248 | | | | | extension packages to a gateway | | | | | via the local and remote | | | | | descriptors. The attribute itself | | | | | is unaffected by multiplexing, but | | | | | the packaged referenced in a | | | | | specific use of the attribute may | | | | | be impacted. Further analysis of | | | | | each package is needed to | | | | | determine if there is an issue. | | | | | This is only a concern in | | | | | environments using a decomposed | | | | | server/gateway with H.248 signaled | | | | | between them. The ITU-T will need | | | | | to do further analysis of various | | | | | packages when they specify how to | | | | | signal the use of multiplexing to | | | | | a gateway. | | | | | | | | +-----------+------------------------------------+-------+----------+ ITU-T H.248.15 Attribute Analysis 5.57. RFC4975 - The Message Session Relay Protocol [RFC4975] the Message Session Relay Protocol, a protocol for transmitting a series of related instant messages in the context of a session. Message sessions are treated like any other media stream Nandakumar Expires May 30, 2015 [Page 47] Internet-Draft SDP Attribute Multiplexing November 2014 when set up via a rendezvous or session creation protocol such as the Session Initiation Protocol. +-----------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +-----------------------+---------------+-------+--------------+ | accept-types | Not Impacted | M | NORMAL | | | | | | | accept-wrapped-types | Not Impacted | M | NORMAL | | | | | | | max-size | Not Impacted | M | NORMAL | | | | | | | path | Not Impacted | M | NORMAL | | | | | | +-----------------------+---------------+-------+--------------+ RFC4975 Attribute Analysis 5.58. Historical Attributes This section specifies analysis for the attributes that are included for historic usage alone by the [IANA]. +----------+---------------------+----------------+-----------------+ | Name | Notes | Level | Mux Category | +----------+---------------------+----------------+-----------------+ | rtpred1 | Historic | Not-Applicable | NOT RECOMMENDED | | | attributes. | | | | | | | | | rtpred2 | Historic | Not-Applicable | NOT RECOMMENDED | | | attributes. | | | | | | | | +----------+---------------------+----------------+-----------------+ Historical Attribute Analysis 6. bwtype Attribute Analysis This section specifies handling of specific bandwidth attributes when used in multiplexing scenarios. 6.1. RFC4566 - SDP: Session Description Protocol Nandakumar Expires May 30, 2015 [Page 48] Internet-Draft SDP Attribute Multiplexing November 2014 +------------+-----------------------------------+-------+----------+ | Name | Notes | Level | Mux | | | | | Category | +------------+-----------------------------------+-------+----------+ | bwtype:CT | Not Impacted | S | NORMAL | | | | | | | bwtype:AS | For the media level usage, the | B | SUM | | | aggregate of individual bandwidth | | | | | values is considered. | | | | | | | | +------------+-----------------------------------+-------+----------+ RFC4566 bwtype Analysis 6.2. RFC3556 - SDP Bandwidth Modifiers for RTCP Bandwidth [RFC3556] defines an extension to the Session Description Protocol (SDP) to specify two additional modifiers for the bandwidth attribute. These modifiers may be used to specify the bandwidth allowed for RTP Control Protocol (RTCP) packets in a Real-time Transport Protocol (RTP) session. +------------+-----------------------------------+-------+----------+ | Name | Notes | Level | Mux | | | | | Category | +------------+-----------------------------------+-------+----------+ | bwtype:RS | Session level usage represents | B | SUM | | | session aggregate and media level | | | | | usage indicates SUM of the | | | | | individual values while | | | | | multiplexing | | | | | | | | | bwtype:RR | Session level usage represents | B | SUM | | | session aggregate and media level | | | | | usage indicates SUM of the | | | | | individual values while | | | | | multiplexing | | | | | | | | +------------+-----------------------------------+-------+----------+ RFC3556 bwtype Analysis 6.3. RFC3890 - Bandwidth Modifier for SDP [RFC3890] defines a Session Description Protocol (SDP) Transport Independent Application Specific Maximum (TIAS) bandwidth modifier that does not include transport overhead; instead an additional packet rate attribute is defined. The transport independent bit-rate Nandakumar Expires May 30, 2015 [Page 49] Internet-Draft SDP Attribute Multiplexing November 2014 value together with the maximum packet rate can then be used to calculate the real bit-rate over the transport actually used. +------------------+-----------------------------+-------+----------+ | Name | Notes | Level | Mux | | | | | Category | +------------------+-----------------------------+-------+----------+ | bwtype:TIAS | The usage of TIAS is not | B | SPECIAL | | | clearly defined | | | | | Offer/Answer usage. | | | | | | | | | bwtype:maxprate | The usage of TIAS and | B | SPECIAL | | | maxprate is not well | | | | | defined under multiplexing | | | | | | | | +------------------+-----------------------------+-------+----------+ RFC3890 bwtype Analysis The intention of TIAS is that the media level bit-rate is multiplied with the known per-packet overhead for the selected transport and the maxprate value to determine the worst case bit-rate from the transport to more accurately capture the required usage. Summing TIAS values independently across m=lines and multiplying the computed sum with maxprate and the per-packet overhead would inflate the value significantly. Instead performing multiplication and adding the individual values is a more appropriate usage. 7. rtcp-fb Attribute Analysis This section analyzes rtcp-fb SDP attributes. 7.1. RFC4585 - RTP/AVPF [RFC4585] defines an extension to the Audio-visual Profile (AVP) that enables receivers to provide, statistically, more immediate feedback to the senders and thus allows for short-term adaptation and efficient feedback-based repair mechanisms to be implemented. Nandakumar Expires May 30, 2015 [Page 50] Internet-Draft SDP Attribute Multiplexing November 2014 +----------+----------------------------+-------+-------------------+ | Attr | Notes | Level | Mux Category | | Name | | | | +----------+----------------------------+-------+-------------------+ | ack rpsi | The attribute value must | M | IDENTICAL-PER-PT | | | be same for a given codec | | | | | configuration | | | | | | | | | ack app | Feedback parameters MUST | M | SPECIAL | | | be handled in the app | | | | | specific way when | | | | | multiplexed | | | | | | | | | nack | The attribute value must | M | IDENTICAL-PER-PT | | | be same for a given codec | | | | | configuration | | | | | | | | | nack pli | The attribute value must | M | IDENTICAL-PER-PT | | | be same for a given codec | | | | | configuration | | | | | | | | | nack sli | The attribute value must | M | IDENTICAL-PER-PT | | | be same for a given codec | | | | | configuration | | | | | | | | | nack | The attribute value must | M | IDENTICAL-PER-PT | | rpsi | be same for a given codec | | | | | configuration | | | | | | | | | nack app | Feedback parameters MUST | M | SPECIAL | | | be handled in the app | | | | | specific way when | | | | | multiplexed | | | | | | | | | trr-int | The attribute value must | M | IDENTICAL-PER-PT | | | be same for a given codec | | | | | configuration | | | | | | | | +----------+----------------------------+-------+-------------------+ RFC4585 Attribute Analysis 7.2. RFC5104 - Codec Control Messages in AVPF [RFC5104] specifies a few extensions to the messages defined in the Audio-Visual Profile with Feedback (AVPF). They are helpful primarily in conversational multimedia scenarios where centralized Nandakumar Expires May 30, 2015 [Page 51] Internet-Draft SDP Attribute Multiplexing November 2014 multipoint functionalities are in use. However, some are also usable in smaller multicast environments and point-to-point calls. +-------+-------------------------------+-------+-------------------+ | Attr | Notes | Level | Mux Category | | Name | | | | +-------+-------------------------------+-------+-------------------+ | ccm | The attribute value must be | M | IDENTICAL-PER-PT | | | same for a given codec | | | | | configuration | | | | | | | | +-------+-------------------------------+-------+-------------------+ RFC5104 Attribute Analysis 7.3. RFC6285 - Unicast-Based RAMS +-------+-------------------------------+-------+-------------------+ | Name | Notes | Level | Mux Category | +-------+-------------------------------+-------+-------------------+ | nack | The attribute value must be | M | IDENTICAL-PER-PT | | rai | same for a given codec | | | | | configuration | | | | | | | | +-------+-------------------------------+-------+-------------------+ RFC6285 Attribute Analysis 7.4. RFC6679 - ECN for RTP over UDP/IP [RFC6679] specifies how Explicit Congestion Notification (ECN) can be used with the Real-time Transport Protocol (RTP) running over UDP, using the RTP Control Protocol (RTCP) as a feedback mechanism. It defines a new RTCP Extended Report (XR) block for periodic ECN feedback, a new RTCP transport feedback message for timely reporting of congestion events, and a Session Traversal Utilities for NAT (STUN) extension used in the optional initialization method using Interactive Connectivity Establishment (ICE). Nandakumar Expires May 30, 2015 [Page 52] Internet-Draft SDP Attribute Multiplexing November 2014 +------------------+---------------------------+-------+------------+ | Name | Notes | Level | Mux | | | | | Category | +------------------+---------------------------+-------+------------+ | ecn-capable-rtp | ECN markup are enabled at | M | IDENTICAL | | | the RTP Session level | | | | | | | | | nack ecn | This attribute enables | M | IDENTICAL | | | ECN at the RTP session | | | | | level | | | | | | | | +------------------+---------------------------+-------+------------+ RFC6679 Attribute Analysis 7.5. RFC6642 - Third-Party Loss Report In a large RTP session using the RTP Control Protocol (RTCP) feedback mechanism defined in [RFC4585], a feedback target may experience transient overload if some event causes a large number of receivers to send feedback at once. This overload is usually avoided by ensuring that feedback reports are forwarded to all receivers, allowing them to avoid sending duplicate feedback reports. However, there are cases where it is not recommended to forward feedback reports, and this may allow feedback implosion. [RFC6642] memo discusses these cases and defines a new RTCP Third-Party Loss Report that can be used to inform receivers that the feedback target is aware of some loss event, allowing them to suppress feedback. Associated Session Description Protocol (SDP) signaling is also defined. +--------+------------------------------+-------+-------------------+ | Name | Notes | Level | Mux Category | +--------+------------------------------+-------+-------------------+ | nack | The attribute value must be | M | IDENTICAL-PER-PT | | tllei | same for a given codec | | | | | configuration | | | | | | | | | nack | The attribute value must be | M | IDENTICAL-PER-PT | | pslei | same for a given codec | | | | | configuration | | | | | | | | +--------+------------------------------+-------+-------------------+ RFC6642 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 53] Internet-Draft SDP Attribute Multiplexing November 2014 7.6. RFC5104 - Codec Control Messages in AVPF +--------+------------------------------+-------+-------------------+ | Attr | Notes | Level | Mux Category | | Name | | | | +--------+------------------------------+-------+-------------------+ | ccm | The attribute value must be | M | IDENTICAL-PER-PT | | fir | same for a given codec | | | | | configuration | | | | | | | | | ccm | The attribute value must be | M | IDENTICAL-PER-PT | | tmmbr | same for a given codec | | | | | configuration | | | | | | | | | ccm | The attribute value must be | M | IDENTICAL-PER-PT | | tstr | same for a given codec | | | | | configuration | | | | | | | | | ccm | The attribute value must be | M | IDENTICAL-PER-PT | | vbcm | same for a given codec | | | | | configuration | | | | | | | | +--------+------------------------------+-------+-------------------+ RFC5104 Attribute Analysis 8. group Attribute Analysis This section analyzes SDP "group" semantics. 8.1. RFC5888 - SDP Grouping Framework [RFC5888] defines a framework to group "m" lines in the Session Description Protocol (SDP) for different purposes. +------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+---------------+-------+--------------+ | group:LS | Not Impacted | S | NORMAL | | | | | | | group:FID | Not Impacted | S | NORMAL | | | | | | +------------+---------------+-------+--------------+ RFC5888 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 54] Internet-Draft SDP Attribute Multiplexing November 2014 8.2. RFC3524 - Mapping Media Streams to Resource Reservation Flows [RFC3524] defines an extension to the Session Description Protocol (SDP) grouping framework. It allows requesting a group of media streams to be mapped into a single resource reservation flow. The SDP syntax needed is defined, as well as a new "semantics" attribute called Single Reservation Flow (SRF). +------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+---------------+-------+--------------+ | group:SRF | Not Impacted | S | NORMAL | | | | | | +------------+---------------+-------+--------------+ RFC3524 Attribute Analysis 8.3. RFC4091 - ANAT Semantics [RFC4091] defines the Alternative Network Address Types (ANAT) semantics for the Session Description Protocol (SDP) grouping framework. The ANAT semantics allow alternative types of network addresses to establish a particular media stream. +-------------+---------------------------+-------+-----------------+ | Name | Notes | Level | Mux Category | +-------------+---------------------------+-------+-----------------+ | group:ANAT | ANAT semantics is | S | NOT RECOMMENDED | | | obseleted | | | | | | | | +-------------+---------------------------+-------+-----------------+ RFC4091 Attribute Analysis 8.4. RFC5956 - FEC Grouping Semantics in SDP [RFC5956] defines the semantics for grouping the associated source and FEC-based (Forward Error Correction) repair flows in the Session Description Protocol (SDP). The semantics defined in the document are to be used with the SDP Grouping Framework (RFC 5888). These semantics allow the description of grouping relationships between the source and repair flows when one or more source and/or repair flows are associated in the same group, and they provide support for additive repair flows. SSRC-level (Synchronization Source) grouping semantics are also defined in this document for Real-time Transport Protocol (RTP) streams using SSRC multiplexing. Nandakumar Expires May 30, 2015 [Page 55] Internet-Draft SDP Attribute Multiplexing November 2014 +---------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +---------------+---------------+-------+--------------+ | group:FEC-FR | Not Impacted | S | NORMAL | | | | | | +---------------+---------------+-------+--------------+ RFC5956 Attribute Analysis 8.5. RFC5583 - Signaling Media Decoding Dependency in SDP [RFC5583] defines semantics that allow for signaling the decoding dependency of different media descriptions with the same media type in the Session Description Protocol (SDP). This is required, for example, if media data is separated and transported in different network streams as a result of the use of a layered or multiple descriptive media coding process. +--------+------------------------------+-------+-------------------+ | Name | Notes | Level | Mux Category | +--------+------------------------------+-------+-------------------+ | depend | The attribute value must be | M | IDENTICAL-PER-PT | | lay | same for a given codec | | | | | configuration | | | | | | | | | depend | The attribute value must be | M | IDENTICAL-PER-PT | | mdc | same for a given codec | | | | | configuration | | | | | | | | +--------+------------------------------+-------+-------------------+ RFC5583 Attribute Analysis 8.6. RFC7104 - Duplication Grouping Semantics in the SDP [RFC7104] defines the semantics for grouping redundant streams in the Session Description Protocol (SDP). The semantics defined in this document are to be used with the SDP Grouping Framework. Grouping semantics at the Synchronization Source (SSRC) level are also defined in this document for RTP streams using SSRC multiplexing. Nandakumar Expires May 30, 2015 [Page 56] Internet-Draft SDP Attribute Multiplexing November 2014 +------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------+---------------+-------+--------------+ | group:DUP | Not Impacted | S | NORMAL | | | | | | +------------+---------------+-------+--------------+ RFC7104 Attribute Analysis 9. ssrc-group Attribute Analysis This section analyzes "ssrc-group" semantics. 9.1. RFC5576 - Source-Specific SDP Attributes +-------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +-------------------+---------------+-------+--------------+ | ssrc-group:FID | Not Impacted | SR | NORMAL | | | | | | | ssrc-group:FEC | Not Impacted | SR | NORMAL | | | | | | | ssrc-groupFEC-FR | Not Impacted | SR | NORMAL | | | | | | +-------------------+---------------+-------+--------------+ RFC5576 Attribute Analysis 9.2. RFC7104 - Duplication Grouping Semantics in the SDP +-----------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +-----------------+---------------+-------+--------------+ | ssrc-group:DUP | Not Impacted | SR | NORMAL | | | | | | +-----------------+---------------+-------+--------------+ RFC7104 Attribute Analysis 10. QoS Mechanism Token Analysis This section analyzes QoS tokes specified with SDP. 10.1. RFC5432 - QoS Mechanism Selection in SDP Nandakumar Expires May 30, 2015 [Page 57] Internet-Draft SDP Attribute Multiplexing November 2014 +-------+---------------------------------------+-------+-----------+ | Name | Notes | Level | Mux | | | | | Category | +-------+---------------------------------------+-------+-----------+ | rsvp | Not Impacted, since QOS mechanisms | B | NORMAL | | | are applied per flow. | | | | | | | | | nsis | Not Impacted, since QOS mechanisms | B | NORMAL | | | are applied per flow. | | | | | | | | +-------+---------------------------------------+-------+-----------+ RFC5432 Attribute Analysis 11. k= Attribute Analysis 11.1. RFC4566 SDP: Session Description Protocol +------+------------------------------------+-------+---------------+ | Name | Notes | Level | Mux Category | +------+------------------------------------+-------+---------------+ | k= | It is NOT recommended to use this | S | NOT | | | attribute | | RECOMMENDED | | | | | | +------+------------------------------------+-------+---------------+ RFC4566 Attribute Analysis 12. content Attribute Analysis 12.1. RFC4796 +------------------+---------------+-------+--------------+ | Name | Notes | Level | Mux Category | +------------------+---------------+-------+--------------+ | content:slides | Not Impacted | M | NORMAL | | | | | | | content:speaker | Not Impacted | M | NORMAL | | | | | | | content:main | Not Impacted | M | NORMAL | | | | | | | content:sl | Not Impacted | M | NORMAL | | | | | | | content:alt | Not Impacted | M | NORMAL | | | | | | +------------------+---------------+-------+--------------+ RFC4796 Attribute Analysis Nandakumar Expires May 30, 2015 [Page 58] Internet-Draft SDP Attribute Multiplexing November 2014 13. Payload Formats 13.1. RFC5109 - RTP Payload Format for Generic FEC [RFC5109] describes a payload format for generic Forward Error Correction (FEC) for media data encapsulated in RTP. It is based on the exclusive-or (parity) operation. The payload format allows end systems to apply protection using various protection lengths and levels, in addition to using various protection group sizes to adapt to different media and channel characteristics. It enables complete recovery of the protected packets or partial recovery of the critical parts of the payload depending on the packet loss situation. +---------------------+----------------------+-------+--------------+ | Name | Notes | Level | Mux Category | +---------------------+----------------------+-------+--------------+ | audio/ulpfec | Not recommended for | M | NOT | | | multiplexing due to | | RECOMMENDED | | | reuse of SSRCs | | | | | | | | | video/ulpfec | Not recommended for | M | NOT | | | multiplexing due to | | RECOMMENDED | | | reuse of SSRCs | | | | | | | | | text/ulpfec | Not recommended for | M | NOT | | | multiplexing due to | | RECOMMENDED | | | reuse of SSRCs | | | | | | | | | application/ulpfec | Not recommended for | M | NOT | | | multiplexing due to | | RECOMMENDED | | | reuse of SSRCs | | | | | | | | +---------------------+----------------------+-------+--------------+ RFC5109 Payload Format Analysis Draft draft-lennox-payload-ulp-ssrc-mux proposes a simple fix to make it possible to use ULP with multiplexing and ULP is allowed when used with that. 14. Multiplexing Considerations for Encapsulating Attributes This sections deals with recommendations for defining the multiplexing characteristics of the SDP attributes that encapsulate other SDP attributes/parameters. Such attributes as of today, for example, are defined in [RFC3407], [RFC5939] and [RFC6871] as part of a generic framework for indicating and negotiating transport, media and media format related capabilities in the SDP. Nandakumar Expires May 30, 2015 [Page 59] Internet-Draft SDP Attribute Multiplexing November 2014 The behavior of such attributes under multiplexing is in turn defined by the multiplexing behavior of the attributes they encapsulate which are made known once the Offer/Answer negotiation process is completed. 14.1. RFC3407 - cpar Attribute Analysis [RFC3407] capability parameter attribute (a=cpar) encapsulates b= (bandwidth) or an a= attribute. For bandwidth attribute encapsulation, the category SUM is inherited. For the case of a= attribute, the category corresponding to the SDP attribute being encapsulated is inherited. v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 m=video 3456 RTP/AVP 100 a=rtpmap:100 VP8/90000 a=sqn: 0 a=cdsc: 1 video RTP/AVP 100 a=cpar: a=rtcp-mux m=video 3456 RTP/AVP 101 a=rtpmap:101 VP8/90000 a=fmtp:100 max-fr=15;max-fs=1200 a=cdsc: 2 video RTP/AVP 101 a=cpar: a=rtcp-mux In the above example ,the category IDENTICAL is inherited for the cpar encapsulated rtcp-mux attribute. 14.2. RFC5939 Analysis [RFC5939] defines a general SDP capability negotiation framework. It also specifies how to provide transport protocols and SDP attributes as capabilities and negotiate them using the framework. For this purpose, [RFC5939] defines the following o A set of capabilities for the session and its associated media stream components, supported by each side. The attribute ("a=acap") defines how to list an attribute name and its associated value (if any) as a capability. The attribute ("a=tcap") defines how to list transport protocols (e.g., "RTP/ AVP") as capabilities. Nandakumar Expires May 30, 2015 [Page 60] Internet-Draft SDP Attribute Multiplexing November 2014 o A set of potential configurations ("a=pcfg") provided by the offerer to indicate whcich combination of those capabilities can be used for the session and its associated media stream components. Potential configurations are not ready for use until fully negotiated. They provide an alternative that may be used, subject to SDP capability negotiation procedures. In particular the answerer may choose one of the potential configurations for use as part of the current Offer/Answer exchange. o An actual configuration ("a=acfg") for the session and its associated media stream components. The actual configuration identifies the potential configuration that was negotiated for use. Use of an actual configuration does not require any further negotiation. o A negotiation process that takes the current actual and the set of potential configurations (combinations of capabilities) as input and provides the negotiated actual configurations as output. In [RFC5939] the negotiation process is done independently for each media description. 14.2.1. Recommendation - Procedures for Potential Configuration Pairing This section provides recommendations for entities generating and processing SDP under the generic capability negotiation framework as defined in [RFC5939] under the context of media stream multiplexing. These recommendations are provided for the purposes of enabling the Offerer to make sure that the generated potential configurations between the multiplexed streams can (easily) be negotiated to be consistent between those streams. In particular, the procedures aim to simplify Answerer's procedure to choose potential configurations that are consistent across all the bundled media descriptions. A potential configuration selects a set of attributes and parameters that become part of the media description when negotiated. When multiplexing media descriptions with potential configurations specified, there may be a need for coordinating this selection between multiplexed media descriptions ensuring right multiplexing behavior. Although it is possible to analyze the various potential configurations in bundled media descriptions to find combinations that satisfy such constraints, it can quickly become complicated to do so. The procedures defined in [RFC5939] state that each potential configuration in the SDP has a unique configuration number, however Nandakumar Expires May 30, 2015 [Page 61] Internet-Draft SDP Attribute Multiplexing November 2014 the scope of uniqueness is limited to each media description. To make it simple for the answerer to chose valid combinations of potential configurations across media descriptions in a given bundle group, we provide a simple rule for constructing potential configurations:- o Let m-bundle be the set of media descriptions that form a given bundle . o Let m-bundle-pcfg be the set of media descriptions in m-bundle that include one or more potential configurations. o Each media description in m-bundle-pcfg MUST have at least one potential configuration with the same configuration number (e.g. "1"). o For each potential configuration with configuration number x in m- bundle-pcfg, the offerer MUST ensure that if the answerer chooses configuration number x in each of the media descriptions in m- bundle-pcfg, then the resulting SDP will have all multiplexing constraints satisfied for those media descriptions. o Since it is nearly impossible to define a generic mechanism for various capability extensions , this document does't provide procedures for dealing with the capability extension attributes. However, Section 14.3 provide analysis of media capability extension attributes as defined in [RFC6871]. The above allows the answerer to easily find multiplexing compatible combinations of potential configurations:- The answerer simply choses a potential configuration (number) that is present in all of the media descriptions with potential configurations in the bundle. Note that it is still possible for the offerer to provide additional potential configurations with independent configuration numbers. The answerer will have to perform more complicated analysis to determine valid multiplexed combinations of those. 14.2.1.1. Example: Transport Capability Multiplexing Nandakumar Expires May 30, 2015 [Page 62] Internet-Draft SDP Attribute Multiplexing November 2014 v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 a=tcap:1 RTP/SAVPF a=tcap:2 RTP/SAVP a=group:BUNDLE audio video m= audio a=mid:audio a=pcfg:1 t=1 a=pcfg:2 m= video a=mid:video a=pcfg:1 t=1 a=pcfg:2 t=2 In the example above, the potential configurations that offer transport protocol capability of RTP/SAVPF has the same configuration number "1" in both the audio and video media descriptions. 14.2.1.2. Example: Attribute Capability Multiplexing v=0 o=alice 2890844526 2890844527 IN IP4 host.atlanta.example.com s= c=IN IP4 host.atlanta.example.com t=0 0 a=acap:1 a=rtcp-mux a=acap:2 a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:EcGZiNWpFJhQXdspcl1ekcmVCNWpVLcfHAwJSoj|2^20|1:32 a=group:BUNDLE audio video m= audio 49172 RTP/AVP 99 a=mid:audio a=pcfg:1 a=1 a=pcfg:2 m= video 560024 RTP/AVP 100 a=mid:video a=pcfg:1 a=1 a=pcfg:2 a=2 In the example above, the potential configuration number "1" is repeated while referring to attribute capability a=rtcp-mux, since the behavior is IDENTICAL for the attribute a=rtcp-mux under multiplexing. Nandakumar Expires May 30, 2015 [Page 63] Internet-Draft SDP Attribute Multiplexing November 2014 14.3. RFC6871 Analysis [RFC6871] extends capability negotiation framework described in [RFC5939] by defining media capabilities that can be used to indicate and negotiate media types and their associated format parameters. It also allows indication of latent configurations and session capabilities. 14.3.1. Recommendation: Dealing with Payload Type Numbers [RFC6871] defines a new payload type ("pt") parameter to be used with the potential, actual and latent configuration parameters. The parameter associates RTP payload type numbers with the referenced RTP-based media format capabilities ("a=rmcap") defined in [RFC6871] and is appropriate only when the transport protocol uses RTP. This means that the same payload type number can be assigned as part of potential or actual configurations in different media descriptions in a bundle. There are rules for the usage of identical Payload Type values across multiplexed m=lines as described in [I-D.ietf-mmusic-sdp-bundle-negotiation], which MUST be followed here as well. As described in Section 14.2.1, the use of identical configuration numbers for compatible configurations in different media descriptions that are part of the bundle provides a way to ensure that the answerer can easily pick compatible configurations here as well. 14.3.1.1. Example: Attribute Capability Under Shared Payload Type The attributes (a=rmcap, a=mfcap) follow the above recommendations under mutliplexing. Nandakumar Expires May 30, 2015 [Page 64] Internet-Draft SDP Attribute Multiplexing November 2014 v=0 o=- 25678 753849 IN IP4 192.0.2.1 s= c=IN IP4 192.0.2.1 t=0 0 a=creq:med-v0 m=audio 54322 RTP/AVP 96 a=rtpmap:96 AMR-WB/16000/1 a=fmtp:96 mode-change-capability=1; max-red=220; mode-set=0,2,4,7 a=rmcap:1,3 audio AMR-WB/16000/1 a=rmcap:2 audio AMR/8000/1 a=mfcap:1,2 mode-change-capability=1 a=mfcap:3 mode-change-capability=2 a=pcfg:1 m=1 pt=1:96 a=pcfg:2 m=2 pt=2:97 a=pcfg:3 m=3 pt=3:98 m=audio 54322 RTP/AVP 96 a=rtpmap:96 AMR-WB/16000/1 a=fmtp:96 mode-change-capability=1; max-red=220; mode-set=0,2,4,7 a=rmcap:4 audio AMR/8000/1 a=rmcap:5 audio OPUS/48000/2 a=mfcap:5 minptime=40 a=mfcap:4 mode-change-capability=1 a=pcfg:1 m=4 pt=4:97 a=pcfg:4 m=5 pt=5:101 In the example above, the potential configuration number "1" is repeated when referring to media and media format capability used for the Payload Type 97. This implies that both the media capability 2 and 4 along with their media format capabilities MUST refer to the same codec configuration , as per the definition of IDENTICAL-PER-PT. 14.3.2. Recommendation: Dealing with Latent Configurations [RFC6871] adds the notion of a latent configurations, which provides configuration information that may be used to guide a subsequent offer/exchange, e.g. by adding another media stream or use alternative codec combinations not currently offered. Latent configurations have configuration numbers which cannot overlap with the potential configuration numbers [RFC6871]. Supported combinations of potential and latent configurations are indicated by use of the "a=sescap" attribute, however use of this attribute is not recommended with bundled media, since it requires the use of unique configuration numbers across the SDP. Taken together, this means there is no well-defined way to indicate supported combinations of Nandakumar Expires May 30, 2015 [Page 65] Internet-Draft SDP Attribute Multiplexing November 2014 latent configurations, or combinations of latent and potential configurations with bundled media. It is still allowed to use the latent configuration attribute, however the limitations above will apply. To determine valid combinations, actual negotiation will have to be attempted subsequently instead. 15. IANA Considerations [RFC EDITOR NOTE: Please replace RFCXXXX with the RFC number of this document.] The IANA is requested to add a new column named "Mux Category" to several of the subregistries in the "Session Description Protocol (SDP) Parameters" registry. Section 15.1 defines a new subregistry for identifying the initial registrations for various multiplexing categories applicable, as proposed in this document. The tables in Section 15.2 identify name of an entry in the existing subregistry and specify the value to put in the new "Mux Category" column of the associated IANA registry. Any entries in the existing tables that do not have a value for the "Mux Category" specified in this RFC will get a value of "TBD". Future specifications can change the "TBD" entries to the correct value. 15.1. New 'Multiplexing Categories' subregistry A new sub-registry needs to be defined called the "Multiplexing Categories", with the following registrations created initially: "NORMAL", "NOT RECOMMENDED", "IDENTICAL", "TRANSPORT", "SUM", "INHERIT", "IDENTICAL-PER-PT", "SPECIAL" and "TBD" as defined in this document. Initial value registration for "Multiplexing Categories". +-------------------------+-----------+ | Multiplexing Categories | Reference | +-------------------------+-----------+ | NORMAL | RFCXXXX | | NOT RECOMMENDED | RFCXXXX | | IDENTICAL | RFCXXXX | | TRANSPORT | RFCXXXX | | SUM | RFCXXXX | | INHERIT | RFCXXXX | | IDENTICAL-PER-PT | RFCXXXX | | SPECIAL | RFCXXXX | | TBD | RFCXXXX | +-------------------------+-----------+ Nandakumar Expires May 30, 2015 [Page 66] Internet-Draft SDP Attribute Multiplexing November 2014 Further entries may be registered on a first-come first-serve basis. Each registration needs to indicate the multiplexing category value to be added to the "Multiplexing Categories" subregistry as defined in this section. Such a registration must also indicate the applicability of the newly defined multiplexing category value to various subregistries defined at "Session Description Protocol (SDP) Parameters". The general registration procedures of [RFC4566] apply. 15.2. 'Mux Category' column for subregistries Each sub-section identifies a subregistry in the "Session Description Protocol (SDP) Parameters" registry. The tables list the column that identifies the SDP attribute name/Token/Value from the corresponding subregistries and the values to be used for the new "Mux Category" column to be added. 15.2.1. Table: SDP bwtype The following values are to be added to the 'SDP bwtype' subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +----------+--------------+ | SDP Name | Mux Category | +----------+--------------+ | CT | NORMAL | | AS | SUM | | RS | SUM | | RR | SUM | | TIAS | SPECIAL | +----------+--------------+ 15.2.2. Table: att-field (session level) The following values are to be added to the "att-field (session level)" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. Nandakumar Expires May 30, 2015 [Page 67] Internet-Draft SDP Attribute Multiplexing November 2014 +---------------------+------------------+ | SDP Name | Mux Category | +---------------------+------------------+ | cat | NORMAL | | keywds | NORMAL | | type | NORMAL | | type:broadcast | NORMAL | | type:H332 | NORMAL | | type:meeting | NORMAL | | type:moderated | NORMAL | | type:test | NORMAL | | charset | NORMAL | | charset:iso8895-1 | NORMAL | | tool | NORMAL | | ipbcp | NORMAL | | group | NORMAL | | ice-lite | NORMAL | | ice-options | NORMAL | | bcastversion | NORMAL | | 3GPP-Integrity-Key | NOT RECOMMENDED | | 3GPP-SDP-Auth | NOT RECOMMENDED | | alt-group | NOT RECOMMENDED | | PSCid | NORMAL | | bc_service | NORMAL | | bc_program | NORMAL | | bc_service_package | NORMAL | | sescap | NOT RECOMMENDED | | rtsp-ice-d-m | NOT RECOMMENDED | +---------------------+------------------+ 15.2.3. Table: att-field (both session and media level) The following values are to be added to the "att-field (both session and media level)" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +-------------------------+-------------------+ | SDP Name | Mux Category | +-------------------------+-------------------+ | recvonly | NORMAL | | sendrecv | NORMAL | | sendonly | NORMAL | | sdplang | NORMAL | | lang | NORMAL | | h248item | SPECIAL | | sqn | NORMAL | | cdsc | NORMAL | Nandakumar Expires May 30, 2015 [Page 68] Internet-Draft SDP Attribute Multiplexing November 2014 | cpar | INHERIT | | cparmin | SPECIAL | | cparmax | SPECIAL | | rtcp-xr | NORMAL | | maxprate | SPECIAL | | setup | IDENTICAL | | connection | IDENTICAL | | key-mgmt | IDENTICAL | | source-filter | IDENTICAL | | inactive | NORMAL | | fingerprint | TRANSPORT | | flute-tsi | TBD | | flute-ch | TBD | | FEC-declaration | TBD | | FEC-OTI-extension | TBD | | content-desc | TBD | | ice-pwd | TRANSPORT | | ice-ufrag | TRANSPORT | | stkmstream | NORMAL | | extmap | SPECIAL | | qos-mech-send | NORMAL | | qos-mech-recv | NORMAL | | csup | NORMAL | | creq | NORMAL | | acap | INHERIT | | tcap | INHERIT | | 3GPP-QoE-Metrics | NOT RECOMMENDED | | 3GPP-Asset-Information | NOT RECOMMENDED | | mbms-mode | NOT RECOMMENDED | | mbms-repair | NOT RECOMMENDED | | ike-setup | IDENTICAL | | psk-fingerprint | IDENTICAL | | multicast-rtcp | IDENTICAL | | rmcap | IDENTICAL-PER-PT | | omcap | NORMAL | | mfcap | IDENTICAL-PER-PT | | mscap | INHERIT | | 3gpp.iut.replication | TBD | | bcap | INHERIT | | ccap | IDENTICAL | | icap | NORMAL | | 3gpp_sync_info | NORMAL | | 3gpp_MaxRecvSDUSize | NORMAL | | etag | NOT RECOMMENDED | | duplication-delay | NORMAL | | range | NOT RECOMMENDED | | control | NOT RECOMMENDED | | mtag | NOT RECOMMENDED | Nandakumar Expires May 30, 2015 [Page 69] Internet-Draft SDP Attribute Multiplexing November 2014 | ts-refclk | NORMAL | | mediaclk | NORMAL | | calgextmap | NORMAL | +-------------------------+-------------------+ 15.2.4. Table: att-field (media level only) The following values are to be added to the "att-field (media level only)" registry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +---------------------------+-------------------+ | SDP Name | Mux Category | +---------------------------+-------------------+ | ptime | IDENTICAL-PER-PT | | orient | NORMAL | | orient:portrait | NORMAL | | orient:landscape | NORMAL | | orient:seascape | NORMAL | | framerate | IDENTICAL-PER-PT | | quality | NORMAL | | rtpmap | IDENTICAL-PER-PT | | fmtp | IDENTICAL-PER-PT | | rtpred1 | NOT RECOMMENDED | | rtpred2 | NOT RECOMMENDED | | T38FaxVersion | NORMAL | | T38MaxBitRate | NORMAL | | T38FaxFillBitRemoval | NORMAL | | T38FaxTranscodingMMR | NORMAL | | T38FaxTranscodingJBIG | NORMAL | | T38FaxRateManagement | NORMAL | | T38FaxMaxBuffer | NORMAL | | T38FaxMaxDatagram | NORMAL | | T38FaxUdpEC | NORMAL | | maxptime | IDENTICAL-PER-PT | | des | NOT RECOMMENDED | | curr | NOT RECOMMENDED | | conf | NOT RECOMMENDED | | mid | NORMAL | | rtcp | IDENTICAL | | rtcp-fb | IDENTICAL-PER-PT | | label | NORMAL | | T38VendorInfo | NORMAL | | crypto | TRANSPORT | | eecid | NORMAL | | aalType | NORMAL | | capability | NORMAL | Nandakumar Expires May 30, 2015 [Page 70] Internet-Draft SDP Attribute Multiplexing November 2014 | qosClass | NORMAL | | bcob | NORMAL | | stc | NORMAL | | upcc | NORMAL | | atmQOSparms | NORMAL | | atmTrfcDesc | NORMAL | | abrParms | NORMAL | | abrSetup | NORMAL | | bearerType | NORMAL | | lij | NORMAL | | anycast | NORMAL | | cache | NORMAL | | bearerSigIE | NORMAL | | aalApp | NORMAL | | cbrRate | NORMAL | | sbc | NORMAL | | clkrec | NORMAL | | fec | NORMAL | | prtfl | NORMAL | | structure | NORMAL | | cpsSDUsize | NORMAL | | all2CPS | NORMAL | | all2CPSSDUrate | NORMAL | | aal2sscs3661unassured | NORMAL | | aal2sscs3661assured | NORMAL | | aal2sscs3662 | NORMAL | | aal5sscop | NORMAL | | atmmap | NORMAL | | silenceSupp | NORMAL | | ecan | NORMAL | | gc | NORMAL | | profileDesc | NORMAL | | vsel | NORMAL | | dsel | NORMAL | | fsel | NORMAL | | onewaySel | NORMAL | | codecConfig | NORMAL | | isup_usi | NORMAL | | uiLayer1_Prot | NORMAL | | chain | NORMAL | | floorctrl | IDENTICAL | | confid | NORMAL | | userid | NORMAL | | floorid | NORMAL | | FEC | NORMAL | | accept-types | NORMAL | | accept-wrapped-types | NORMAL | | max-size | NORMAL | Nandakumar Expires May 30, 2015 [Page 71] Internet-Draft SDP Attribute Multiplexing November 2014 | path | NORMAL | | dccp-service-code | NOT RECOMMENDED | | rtcp-mux | IDENTICAL | | candidate | TRANSPORT | | ice-mismatch | NORMAL | | remote-candidates | TRANSPORT | | SRTPAuthentication | NORMAL | | SRTPROCTxRate | NORMAL | | rtcp-rsize | IDENTICAL | | file-selector | NORMAL | | file-transfer-id | NORMAL | | file-disposition | NORMAL | | file-date | NORMAL | | file-icon | NORMAL | | file-range | NORMAL | | depend | IDENTICAL-PER-PT | | ssrc | NORMAL | | ssrc-group | NORMAL | | rtcp-unicast | IDENTICAL | | pcfg | SPECIAL | | acfg | SPECIAL | | zrtp-hash | NOT RECOMMENDED | | X-predecbufsize | NOT RECOMMENDED | | X-initpredecbufperiod | NOT RECOMMENDED | | X-initpostdecbufperiod | NOT RECOMMENDED | | X-decbyterate | NOT RECOMMENDED | | 3gpp-videopostdecbufsize | NOT RECOMMENDED | | framesize | NOT RECOMMENDED | | 3GPP-SRTP-Config | NOT RECOMMENDED | | alt | NOT RECOMMENDED | | alt-default-id | NOT RECOMMENDED | | 3GPP-Adaption-Support | NOT RECOMMENDED | | mbms-flowid | NOT RECOMMENDED | | fec-source-flow | SPECIAL | | fec-repair-flow | SPECIAL | | repair-window | SPECIAL | | rams-updates | NOT RECOMMENDED | | imageattr | IDENTICAL-PER-PT | | cfw-id | NORMAL | | portmapping-req | NOT RECOMMENDED | | g.3gpp.cat | NORMAL | | g.3gpp.crs | NORMAL | | ecn-capable-rtp | IDENTICAL | | visited-realm | TRANSPORT | | secondary-realm | TRANSPORT | | omr-s-cksum | NORMAL | | omr-m-cksum | NORMAL | | omr-codecs | NORMAL | Nandakumar Expires May 30, 2015 [Page 72] Internet-Draft SDP Attribute Multiplexing November 2014 | omr-m-att | NORMAL | | omr-s-att | NORMAL | | omr-m-bw | NORMAL | | omr-s-bw | NORMAL | | msrp-cema | NORMAL | | dccp-port | NOT RECOMMENDED | | resource | NORMAL | | channel | NORMAL | | cmid | NORMAL | | content | NORMAL | | lcfg | SPECIAL | | loopback | NORMAL | | loopback-source | NORMAL | | loopback-mirror | NORMAL | | chatroom | TBD | | altc | TRANSPORT | | T38FaxMaxIFP | NORMAL | | T38FaxUdpECDepth | NORMAL | | T38FaxUdpFECMaxSpan | NORMAL | | T38ModemType | NORMAL | | cs-correlation | NORMAL | | rtcp-idms | NORMAL | +---------------------------+-------------------+ 15.2.5. Table: att-field (source level) The following values are to be added to the "att-field (source level)" registry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +----------------+-------------------+ | SDP Name | Mux Category | +----------------+-------------------+ | cname | NORMAL | | previous-ssrc | NORMAL | | fmtp | IDENTICAL-PER-PT | | ts-refclk | NORMAL | | mediaclk | NORMAL | +----------------+-------------------+ 15.2.6. Table: content SDP Parameters The following values are to be added to the "content SDP Parameters" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. Nandakumar Expires May 30, 2015 [Page 73] Internet-Draft SDP Attribute Multiplexing November 2014 +----------+--------------+ | SDP Name | Mux Category | +----------+--------------+ | slides | NORMAL | | speaker | NORMAL | | sl | NORMAL | | main | NORMAL | | alt | NORMAL | +----------+--------------+ 15.2.7. Table: Semantics for the 'group' SDP Attribute The following values are to be added to the "Semantics for the "group" SDP Attribute" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +---------+------------------+ | Token | Mux Category | +---------+------------------+ | LS | NORMAL | | FID | NORMAL | | SRF | NORMAL | | ANAT | NOT RECOMMENDED | | FEC | NORMAL | | FEC-FR | NORMAL | | CS | NORMAL | | DDP | NORMAL | | DUP | NORMAL | +---------+------------------+ 15.2.8. Table: 'rtcp-fb' Attribute Values The following values are to be added to the " 'rtcp-fb' Attribute Values" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +------------+-------------------+ | Value Name | Mux Category | +------------+-------------------+ | ack | IDENTICAL-PER-PT | | app | SPECIAL | | ccm | IDENTICAL-PER-PT | | nack | IDENTICAL-PER-PT | | trr-int | IDENTICAL-PER-PT | +------------+-------------------+ Nandakumar Expires May 30, 2015 [Page 74] Internet-Draft SDP Attribute Multiplexing November 2014 15.2.9. Table: 'ack' and 'nack' Attribute Values The following values are to be added to the " 'ack' and 'nack' Attribute Values" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +------------+-------------------+ | Value Name | Mux Category | +------------+-------------------+ | sli | IDENTICAL-PER-PT | | pli | IDENTICAL-PER-PT | | rpsi | IDENTICAL-PER-PT | | app | SPECIAL | | rai | IDENTICAL-PER-PT | | tllei | IDENTICAL-PER-PT | | pslei | IDENTICAL-PER-PT | | ecn | IDENTICAL | +------------+-------------------+ 15.2.10. Table: 'depend' SDP Attribute Values The following values are to be added to the " 'depend' SDP Attribute Values" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +-------+-------------------+ | Token | Mux Category | +-------+-------------------+ | lay | IDENTICAL-PER-PT | | mdc | IDENTICAL-PER-PT | +-------+-------------------+ 15.2.11. Table: 'cs-correlation' Attribute Values The following values are to be added to the " "cs-correlation" Attribute Values" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. Nandakumar Expires May 30, 2015 [Page 75] Internet-Draft SDP Attribute Multiplexing November 2014 +-----------+--------------+ | Value | Mux Category | +-----------+--------------+ | callerid | NORMAL | | uuie | NORMAL | | dtmf | NORMAL | | external | NORMAL | +-----------+--------------+ 15.2.12. Table: Semantics for the 'ssrc-group' SDP Attribute The following values are to be added to the Semantics for the "Semantics for the "ssrc-group" SDP Attribute" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +---------+--------------+ | Token | Mux Category | +---------+--------------+ | FID | NORMAL | | FEC | NORMAL | | FEC-FR | NORMAL | | DUP | NORMAL | +---------+--------------+ 15.2.13. Table: SDP/RTSP key management protocol identifiers The following values are to be added to the "SDP/RTSP key management protocol identifiers" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +------------+--------------+ | Value Name | Mux Category | +------------+--------------+ | mikey | IDENTICAL | +------------+--------------+ 15.2.14. Table: Codec Control Messages The following values are to be added to the "Codec Control Messages" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. Nandakumar Expires May 30, 2015 [Page 76] Internet-Draft SDP Attribute Multiplexing November 2014 +------------+-------------------+ | Value Name | Mux Category | +------------+-------------------+ | fir | IDENTICAL-PER-PT | | tmmbr | IDENTICAL-PER-PT | | tstr | IDENTICAL-PER-PT | | vbcm | IDENTICAL-PER-PT | +------------+-------------------+ 15.2.15. Table: QoS Mechanism Tokens The following values are to be added to the "QoS Mechanism Tokens" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +---------------+--------------+ | QoS Mechanism | Mux Category | +---------------+--------------+ | rsvp | NORMAL | | nsis | NORMAL | +---------------+--------------+ 15.2.16. Table: SDP Capability Negotiation Option Tags The following values are to be added to the "SDP Capability Negotiation Option Tags" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +---------------+--------------+ | QoS Mechanism | Mux Category | +---------------+--------------+ | cap-v0 | NORMAL | | med-v0 | NORMAL | | bcap-v0 | NORMAL | | ccap-v0 | NORMAL | | icap-v0 | NORMAL | +---------------+--------------+ 15.2.17. Table: Timestamp Reference Clock Source Parameters The following values are to be added to the "Timestamp Reference Clock Source Parameters" subregistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. Nandakumar Expires May 30, 2015 [Page 77] Internet-Draft SDP Attribute Multiplexing November 2014 +----------+--------------+ | Name | Mux Category | +----------+--------------+ | ntp | NORMAL | | ptp | NORMAL | | gps | NORMAL | | gal | NORMAL | | glonass | NORMAL | | local | NORMAL | | private | NORMAL | +----------+--------------+ 15.2.18. Table: Media Clock Source Parameters The following values are to be added to the "Media Clock Source Parameters" subegistry in the "Session Description Protocol (SDP) Parameters" registry. The references should be updated to point at this RFC as well as the previous references. +-----------+--------------+ | Name | Mux Category | +-----------+--------------+ | sender | NORMAL | | direct | NORMAL | | IEEE1722 | NORMAL | +-----------+--------------+ 16. Security Considerations This document does not add any new security considerations beyond the existing considerations in the RFC for protocols that are being multiplexed together. The ways that SRTP streams are keyed is not believed to create any two-time pad vulnerability for the currently defined SRTP keying mechanism. 17. Acknowledgments I would like to thank Cullen Jennings, Flemming Andreasen for suggesting the categories, contributing text and reviewing the draft. I would also link to thank Magnus Westerlund, Christer Holmberg, Jonathan Lennox, Bo Burman, and Dan Wing on suggesting structural changes helping improve the document readability. I would like also to thank following experts on their inputs and reviews as listed - Flemming Andreasen(5.24,5.32,5.33,14), Rohan Mahy(5.57), Eric Burger(5.26),Christian Huitema(5.14), Christer Nandakumar Expires May 30, 2015 [Page 78] Internet-Draft SDP Attribute Multiplexing November 2014 Holmberg(5.21,5.26,5.51,5.52), Richard Ejzak (5.44,5.53,5.54), Colin Perkins(5.7,5.8,5.9,5.58), Magnus westerlund(5.2,5.3,5.9,5.27,5.47,6.1,6.2,6.3,8.3,7), Roni Evens(5.12,5.27,8.4), Subha Dhesikan(5.6,10), Dan Wing(5.7,5.12,5.35,5.39,5.45), Cullen Jennings (5.40), Ali C Begen(5.1,5.20,5.22,5.25,5.38,7.3,8.2,8.4,8.6,9.2,13.1), Bo Burman (7.2,7.6), Charles Eckel(5.15,5.27,5.28,9.1,8.5), Paul Kyzivat(5.24), Ian Johansson(5.15), Saravanan Shanmugham(5.11), Paul E Jones(5.30), Rajesh Kumar(5.48), Jonathan Lennox(5.36,5,15,9.1,11.1), Mo Zanaty(5.4,5.5,5.23,8.1,8.3,8.5,12.1), Christian Huitema (5.14), Qin Wu (5.47 PM-Dir review), Hans Stokking(5.43,5.16). 18. Change Log [RFC EDITOR NOTE: Please remove this section when publishing] Changes from draft-ietf-mmusic-sdp-mux-attributes-04 o Fixed minor nits overall. o Updated Acknowledgement Sections o Last Call Version. Changes from draft-ietf-mmusic-sdp-mux-attributes-03 o More re-work on the IANA section. o Clean ups preparing for the last call. Changes from draft-ietf-mmusic-sdp-mux-attributes-02 o Incorporated suggestions from Flemming on Capability Negotiation. o Closed open issues from IETF90 o Added IANA section to list the categories for all the SDP attributes anlayzed o Lots of cleanup o Reformatted Refernces section to use short-form notation Changes from draft-ietf-mmusic-sdp-mux-attributes-01 o Updated section 15 to provide detailed recommendation on dealing with encapsulating attributes. Also updated sections 5.20, 5.28, 5.29 to refer to Section 15. Nandakumar Expires May 30, 2015 [Page 79] Internet-Draft SDP Attribute Multiplexing November 2014 o Added new categories IDENTICAL-PER-PT and INHERIT o Updated Sections 16 to add the new categories. o Updated Sections 5.1, 5.14, 5.15, 5.38, 8.5 to reflect the category IDENTICAL-PER-PT. o Reformatted section 4 to add individual categories to their own sections. Changes from draft-ietf-mmusic-sdp-mux-attributes-00 o Added Section 15 to provide recommendations on multiplexing SDP encapsulating attributes. Also updated sections 5.20, 5.28, 5.29 to refer to Section 15. o Updated Section 5.38 to incorporate PM-dir review inputs from Qin Wu o Updated Sections 5.2,5.14,8.5 to refer to BUNDLE draft for more clarity. o Fixed few nits regarding sentence clarity and fill-in the NOTES section where information was lacking. Changes from draft-nandakumar-mmusic-mux-attributes-05 o Renamed the document to be a WG document. o Added Section 14. o Updated Open Issues based on IETF88 discussions. Changes from draft-nandakumar-mmusic-mux-attributes-04 o Added few OPEN ISSUES that needs to be discussed. o Updated sections 5.10,5.23,5,24,5,25,7.2,9.1,5.12,5.27,8.4, 5.44,5.11,5.4,5.19,10.1,10.5,5.21,10.4,15.1 o Updated Table Column name Current to Level and improved TRANSPORT category explanation on suggestions form Dan Wing. o Grouped all the rtcp-fb attribute analysis under a single section as suggested by Magnus/ Changes from draft-nandakumar-mmusic-mux-attributes-03 Nandakumar Expires May 30, 2015 [Page 80] Internet-Draft SDP Attribute Multiplexing November 2014 o Maintenance change to clean up grammatical nits and wordings. Changes from draft-nandakumar-mmusic-mux-attributes-02 o Updated Sections 5.3,5.5,5.6,5.7,5.9,5.8,5.11,5.13,5.22,5.34, 5.37,5.40,5.41,5.42,5.43,5.44,5.45,6.1,6.2,6.3,8,3,12.1 based on the inputs from the respective RFC Authors. Changes from draft-nandakumar-mmusic-mux-attributes-01 o Replaced Category BAD with NOT RECOMMENDED. o Added Category TBD. o Updated IANA Consideration Section. Changes from draft-nandakumar-mmusic-mux-attributes-00 o Added new section for dealing with FEC payload types. 19. References 19.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC4566] Handley, M., Jacobson, V., and C. Perkins, "SDP: Session Description Protocol", RFC 4566, July 2006. 19.2. Informative References [H.248.15] "Gateway control protocol: SDP H.248 package attribute", . [I-D.ietf-mmusic-sdp-bundle-negotiation] Holmberg, C., Alvestrand, H., and C. Jennings, "Negotiating Media Multiplexing Using the Session Description Protocol (SDP)", draft-ietf-mmusic-sdp-bundle- negotiation-12 (work in progress), October 2014. [I.D-draft-ietf-dart-dscp-rtp] Black, D. and P. Jones, "The Session Description Protocol (SDP) Content Attribute", draft-ietf-dart-dscp-rtp-07 (work in progress), September 2014. Nandakumar Expires May 30, 2015 [Page 81] Internet-Draft SDP Attribute Multiplexing November 2014 [IANA] "Session Description Protocol (SDP) Parameters", . [ITU-T-REC.Q1970] "Q.1970 : BICC IP bearer control protocol", . [R3GPPTS183.063] "TISPAN - IMS based ITPV Stage 3 specification.", . [R3GPPTS24.182] "IP Multimedia Subsystem (IMS) Customized Alerting Tones (CAT); Protocol specification", . [R3GPPTS24.183] "IP Multimedia Subsystem (IMS) Customized Ringing Signal (CRS); Protocol specification", . [R3GPPTS24.229] "IP multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP);", . [R3GPPTS26.114] "IP multimedia Subsystem : Media Handling and interaction", . [RFC3108] Kumar, R. and M. Mostafa, "Conventions for the use of the Session Description Protocol (SDP) for ATM Bearer Connections", RFC 3108, May 2001. [RFC3264] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with Session Description Protocol (SDP)", RFC 3264, June 2002. [RFC3312] Camarillo, G., Marshall, W., and J. Rosenberg, "Integration of Resource Management and Session Initiation Protocol (SIP)", RFC 3312, October 2002. [RFC3407] Andreasen, F., "Session Description Protocol (SDP) Simple Capability Declaration", RFC 3407, October 2002. Nandakumar Expires May 30, 2015 [Page 82] Internet-Draft SDP Attribute Multiplexing November 2014 [RFC3524] Camarillo, G. and A. Monrad, "Mapping of Media Streams to Resource Reservation Flows", RFC 3524, April 2003. [RFC3556] Casner, S., "Session Description Protocol (SDP) Bandwidth Modifiers for RTP Control Protocol (RTCP) Bandwidth", RFC 3556, July 2003. [RFC3605] Huitema, C., "Real Time Control Protocol (RTCP) attribute in Session Description Protocol (SDP)", RFC 3605, October 2003. [RFC3611] Friedman, T., Caceres, R., and A. Clark, "RTP Control Protocol Extended Reports (RTCP XR)", RFC 3611, November 2003. [RFC3890] Westerlund, M., "A Transport Independent Bandwidth Modifier for the Session Description Protocol (SDP)", RFC 3890, September 2004. [RFC4091] Camarillo, G. and J. Rosenberg, "The Alternative Network Address Types (ANAT) Semantics for the Session Description Protocol (SDP) Grouping Framework", RFC 4091, June 2005. [RFC4145] Yon, D. and G. Camarillo, "TCP-Based Media Transport in the Session Description Protocol (SDP)", RFC 4145, September 2005. [RFC4567] Arkko, J., Lindholm, F., Naslund, M., Norrman, K., and E. Carrara, "Key Management Extensions for Session Description Protocol (SDP) and Real Time Streaming Protocol (RTSP)", RFC 4567, July 2006. [RFC4568] Andreasen, F., Baugher, M., and D. Wing, "Session Description Protocol (SDP) Security Descriptions for Media Streams", RFC 4568, July 2006. [RFC4570] Quinn, B. and R. Finlayson, "Session Description Protocol (SDP) Source Filters", RFC 4570, July 2006. [RFC4572] Lennox, J., "Connection-Oriented Media Transport over the Transport Layer Security (TLS) Protocol in the Session Description Protocol (SDP)", RFC 4572, July 2006. [RFC4574] Levin, O. and G. Camarillo, "The Session Description Protocol (SDP) Label Attribute", RFC 4574, August 2006. Nandakumar Expires May 30, 2015 [Page 83] Internet-Draft SDP Attribute Multiplexing November 2014 [RFC4583] Camarillo, G., "Session Description Protocol (SDP) Format for Binary Floor Control Protocol (BFCP) Streams", RFC 4583, November 2006. [RFC4585] Ott, J., Wenger, S., Sato, N., Burmeister, C., and J. Rey, "Extended RTP Profile for Real-time Transport Control Protocol (RTCP)-Based Feedback (RTP/AVPF)", RFC 4585, July 2006. [RFC4796] Hautakorpi, J. and G. Camarillo, "The Session Description Protocol (SDP) Content Attribute", RFC 4796, February 2007. [RFC4975] Campbell, B., Mahy, R., and C. Jennings, "The Message Session Relay Protocol (MSRP)", RFC 4975, September 2007. [RFC5104] Wenger, S., Chandra, U., Westerlund, M., and B. Burman, "Codec Control Messages in the RTP Audio-Visual Profile with Feedback (AVPF)", RFC 5104, February 2008. [RFC5109] Li, A., "RTP Payload Format for Generic Forward Error Correction", RFC 5109, December 2007. [RFC5159] Dondeti, L. and A. Jerichow, "Session Description Protocol (SDP) Attributes for Open Mobile Alliance (OMA) Broadcast (BCAST) Service and Content Protection", RFC 5159, March 2008. [RFC5245] Rosenberg, J., "Interactive Connectivity Establishment (ICE): A Protocol for Network Address Translator (NAT) Traversal for Offer/Answer Protocols", RFC 5245, April 2010. [RFC5285] Singer, D. and H. Desineni, "A General Mechanism for RTP Header Extensions", RFC 5285, July 2008. [RFC5432] Polk, J., Dhesikan, S., and G. Camarillo, "Quality of Service (QoS) Mechanism Selection in the Session Description Protocol (SDP)", RFC 5432, March 2009. [RFC5506] Johansson, I. and M. Westerlund, "Support for Reduced-Size Real-Time Transport Control Protocol (RTCP): Opportunities and Consequences", RFC 5506, April 2009. [RFC5547] Garcia-Martin, M., Isomaki, M., Camarillo, G., Loreto, S., and P. Kyzivat, "A Session Description Protocol (SDP) Offer/Answer Mechanism to Enable File Transfer", RFC 5547, May 2009. Nandakumar Expires May 30, 2015 [Page 84] Internet-Draft SDP Attribute Multiplexing November 2014 [RFC5576] Lennox, J., Ott, J., and T. Schierl, "Source-Specific Media Attributes in the Session Description Protocol (SDP)", RFC 5576, June 2009. [RFC5583] Schierl, T. and S. Wenger, "Signaling Media Decoding Dependency in the Session Description Protocol (SDP)", RFC 5583, July 2009. [RFC5760] Ott, J., Chesterfield, J., and E. Schooler, "RTP Control Protocol (RTCP) Extensions for Single-Source Multicast Sessions with Unicast Feedback", RFC 5760, February 2010. [RFC5761] Perkins, C. and M. Westerlund, "Multiplexing RTP Data and Control Packets on a Single Port", RFC 5761, April 2010. [RFC5762] Perkins, C., "RTP and the Datagram Congestion Control Protocol (DCCP)", RFC 5762, April 2010. [RFC5763] Fischl, J., Tschofenig, H., and E. Rescorla, "Framework for Establishing a Secure Real-time Transport Protocol (SRTP) Security Context Using Datagram Transport Layer Security (DTLS)", RFC 5763, May 2010. [RFC5888] Camarillo, G. and H. Schulzrinne, "The Session Description Protocol (SDP) Grouping Framework", RFC 5888, June 2010. [RFC5939] Andreasen, F., "Session Description Protocol (SDP) Capability Negotiation", RFC 5939, September 2010. [RFC5956] Begen, A., "Forward Error Correction Grouping Semantics in the Session Description Protocol", RFC 5956, September 2010. [RFC6064] Westerlund, M. and P. Frojdh, "SDP and RTSP Extensions Defined for 3GPP Packet-Switched Streaming Service and Multimedia Broadcast/Multicast Service", RFC 6064, January 2011. [RFC6128] Begen, A., "RTP Control Protocol (RTCP) Port for Source- Specific Multicast (SSM) Sessions", RFC 6128, February 2011. [RFC6189] Zimmermann, P., Johnston, A., and J. Callas, "ZRTP: Media Path Key Agreement for Unicast Secure RTP", RFC 6189, April 2011. Nandakumar Expires May 30, 2015 [Page 85] Internet-Draft SDP Attribute Multiplexing November 2014 [RFC6193] Saito, M., Wing, D., and M. Toyama, "Media Description for the Internet Key Exchange Protocol (IKE) in the Session Description Protocol (SDP)", RFC 6193, April 2011. [RFC6230] Boulton, C., Melanchuk, T., and S. McGlashan, "Media Control Channel Framework", RFC 6230, May 2011. [RFC6236] Johansson, I. and K. Jung, "Negotiation of Generic Image Attributes in the Session Description Protocol (SDP)", RFC 6236, May 2011. [RFC6284] Begen, A., Wing, D., and T. Van Caenegem, "Port Mapping between Unicast and Multicast RTP Sessions", RFC 6284, June 2011. [RFC6285] Ver Steeg, B., Begen, A., Van Caenegem, T., and Z. Vax, "Unicast-Based Rapid Acquisition of Multicast RTP Sessions", RFC 6285, June 2011. [RFC6364] Begen, A., "Session Description Protocol Elements for the Forward Error Correction (FEC) Framework", RFC 6364, October 2011. [RFC6642] Wu, Q., Xia, F., and R. Even, "RTP Control Protocol (RTCP) Extension for a Third-Party Loss Report", RFC 6642, June 2012. [RFC6679] Westerlund, M., Johansson, I., Perkins, C., O'Hanlon, P., and K. Carlberg, "Explicit Congestion Notification (ECN) for RTP over UDP", RFC 6679, August 2012. [RFC6714] Holmberg, C., Blau, S., and E. Burger, "Connection Establishment for Media Anchoring (CEMA) for the Message Session Relay Protocol (MSRP)", RFC 6714, August 2012. [RFC6773] Phelan, T., Fairhurst, G., and C. Perkins, "DCCP-UDP: A Datagram Congestion Control Protocol UDP Encapsulation for NAT Traversal", RFC 6773, November 2012. [RFC6787] Burnett, D. and S. Shanmugham, "Media Resource Control Protocol Version 2 (MRCPv2)", RFC 6787, November 2012. [RFC6849] Kaplan, H., Hedayat, K., Venna, N., Jones, P., and N. Stratton, "An Extension to the Session Description Protocol (SDP) and Real-time Transport Protocol (RTP) for Media Loopback", RFC 6849, February 2013. Nandakumar Expires May 30, 2015 [Page 86] Internet-Draft SDP Attribute Multiplexing November 2014 [RFC6871] Gilman, R., Even, R., and F. Andreasen, "Session Description Protocol (SDP) Media Capabilities Negotiation", RFC 6871, February 2013. [RFC6947] Boucadair, M., Kaplan, H., Gilman, R., and S. Veikkolainen, "The Session Description Protocol (SDP) Alternate Connectivity (ALTC) Attribute", RFC 6947, May 2013. [RFC7006] Garcia-Martin, M., Veikkolainen, S., and R. Gilman, "Miscellaneous Capabilities Negotiation in the Session Description Protocol (SDP)", RFC 7006, September 2013. [RFC7104] Begen, A., Cai, Y., and H. Ou, "Duplication Grouping Semantics in the Session Description Protocol", RFC 7104, January 2014. [RFC7195] Garcia-Martin, M. and S. Veikkolainen, "Session Description Protocol (SDP) Extension for Setting Audio and Video Media Streams over Circuit-Switched Bearers in the Public Switched Telephone Network (PSTN)", RFC 7195, May 2014. [RFC7197] Begen, A., Cai, Y., and H. Ou, "Duplication Delay Attribute in the Session Description Protocol", RFC 7197, April 2014. [RFC7266] Clark, A., Wu, Q., Schott, R., and G. Zorn, "RTP Control Protocol (RTCP) Extended Report (XR) Blocks for Mean Opinion Score (MOS) Metric Reporting", RFC 7266, June 2014. [RFC7272] van Brandenburg, R., Stokking, H., van Deventer, O., Boronat, F., Montagud, M., and K. Gross, "Inter- Destination Media Synchronization (IDMS) Using the RTP Control Protocol (RTCP)", RFC 7272, June 2014. [RFC7273] Williams, A., Gross, K., van Brandenburg, R., and H. Stokking, "RTP Clock Source Signalling", RFC 7273, June 2014. [T.38] "Procedures for real-time Group 3 facsimile communication over IP networks", . Nandakumar Expires May 30, 2015 [Page 87] Internet-Draft SDP Attribute Multiplexing November 2014 Author's Address Suhas Nandakumar Cisco 170 West Tasman Drive San Jose, CA 95134 USA Email: snandaku@cisco.com Nandakumar Expires May 30, 2015 [Page 88]