INTERNET-DRAFT Joerg Ott Helsinki University of Technology draft-ietf-avt-profile-savpf-10.txt Elisabetta Carrara KTH February 2007 Expires August 2007 Extended Secure RTP Profile for RTCP-based Feedback (RTP/SAVPF) Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Abstract An RTP profile (SAVP) is defined for secure real-time communications, and another profile (AVPF) is specified to provide timely feedback from the receivers to a sender. This memo defines the combination of both profiles to enable secure RTP communications with feedback. Ott, Carrara Expires August 2007 [Page 1] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 Table of Contents 1 Introduction..................................................2 1.1 Definitions..............................................3 1.2 Terminology..............................................4 2 SAVPF Rules...................................................4 2.1 Packet Formats...........................................5 2.2 Extensions...............................................5 2.3 Implications from combining AVPF and SAVP................5 3 SDP Definitions...............................................6 3.1 Profile Definition.......................................6 3.2 Attribute Definitions....................................6 3.3 Profile Negotiation......................................6 3.3.1 Offer/Answer-based Negotiation of Session Descriptions.6 3.3.2 RTSP-based Negotiation of Session Descriptions.........7 3.3.3 Announcing Session Descriptions........................8 3.3.4 Describing Alternative Session Profiles................9 3.4 Examples.................................................9 4 Interworking of AVP, SAVP, AVPF, and SAVPF Entities..........13 5 Security Considerations......................................13 6 IANA Considerations......................................... 14 7 Acknowledgements ........................................... 15 8 Authors' Addresses.......................................... 15 9 Bibliography................................................ 15 9.1 Normative references................................... 15 9.2 Informative References................................. 16 10 IPR Notice.................................................. 17 11 Disclaimer of Validity...................................... 17 12 Full Copyright Statement ................................... 17 13 Acknowledgment.............................................. 17 1 Introduction The Real-time Transport Protocol (RTP/RTCP) [1] and the associated profile for audiovisual communications with minimal control [2] define mechanisms for transmitting time-based media across an IP network. RTP provides means to preserve timing and detect packet losses, among other things, and RTP payload formats provide for proper framing of (continuous) media in a packet-based environment. RTCP enables receivers to provide feedback on reception quality and allows all members of an RTP session to learn about each other. Ott, Carrara Expires August 2007 [Page 2] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 The RTP specification provides only rudimentary support for encrypting RTP and RTCP packets. SRTP [4] defines an RTP profile ("SAVP") for secure RTP media sessions, defining methods for proper RTP and RTCP packet encryption, integrity and replay protection. The initial negotiation of SRTP and its security parameters needs to be done out of band, using e.g. the Session Description Protocol (SDP) [6] together with extensions for conveying keying material [7][8]. The RTP specification also provides limited support for timely feedback from receivers to senders, typically by means of reception statistics reporting in somewhat regular intervals depending on the group size, the average RTCP packet size, and the available RTCP bandwidth. The extended RTP profile for RTCP-based feedback ("AVPF") [3] allows session participants statistically to provide immediate feedback while maintaining the average RTCP data rate for all senders. As for SAVP, the use of AVPF and its parameters needs to be negotiated out-of-band by means of SDP [6] and the extensions defined in [3]. Both SRTP and AVPF are RTP profiles and need to be negotiated. This implies that either one or the other may be used, but both profiles cannot be negotiated for the same RTP session (using one SDP session level description). However, using secure communications and timely feedback together is desirable. Therefore, this document specifies a new RTP profile ("SAVPF") that combines the features of SAVP and AVPF. As SAVP and AVPF are largely orthogonal, the combination of both is mostly straightforward. No sophisticated algorithms need to be specified in this document. Instead, reference is made to both existing profiles and only the implications of their combination and possible deviations from rules of the existing profiles are described as is the negotiation process. 1.1 Definitions The definitions of [1], [2], [3], and [4] apply. The following definitions are specifically used in this document: RTP session: An association among a set of participants communicating with RTP as defined in [1]. (SDP) media description: This term refers to the specification given in a single m= line in an SDP message. An SDP media description may define only one RTP session. Grouping of m= lines in SDP may cause Ott, Carrara Expires August 2007 [Page 3] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 several SDP session level descriptions to define (alternatives of) the same RTP session for the same media type. Media session: A media session refers to a collection of SDP media descriptions that are semantically grouped to represent alternatives of the same communications means. Out of such a group, one will be negotiated or chosen for a communication relationship and the corresponding RTP session will be instantiated. Or the media session will be rejected. In the simplest case, a media session is equivalent to an SDP media description and equivalent to an RTP session. 1.2 Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [5]. 2 SAVPF Rules SAVP is defined as an intermediate layer between RTP (following the regular RTP profile AVP) and the transport layer (usually UDP). This yields a two layer hierarchy within the Real-time Transport Protocol. In SAVPF, the upper (AVP) layer is replaced by the extended RTP profile for feedback (AVPF). AVPF modifies timing rules for transmitting RTCP packets and adds extra RTCP packet formats specific to feedback. These functions are independent of whether or not RTCP packets are subsequently encrypted and/or integrity protected. The functioning of the AVPF layer remains unchanged in SAVPF. The AVPF profile derives from [1] the (optional) use of the encryption prefix for RTCP. The encryption prefix MUST NOT be used within the SAVPF profile (it is not used in SAVP, as it is only applicable to the encryption method specified in [1]). The SAVP part uses extra fields added to the end of RTP and RTCP packets and executes cryptographic transforms on (some of) the RTP/RTCP packet contents. This behavior remains unchanged in SAVPF. The average RTCP packet size calculation done by the AVPF layer for timing purposes MUST take into account the fields added by the SAVP layer. Ott, Carrara Expires August 2007 [Page 4] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 The SRTP part becomes only active whenever the RTP or RTCP was scheduled by the "higher" AVPF layer or received from the transport protocol, irrespective of its timing and contents. 2.1 Packet Formats AVPF defines extra packet formats to provide feedback information. Those extra packet formats defined in [3] (and further ones defined elsewhere for use with AVPF) MAY be used with SAVPF. SAVP defines a modified packet format for SRTP and SRTCP packets that essentially consists of the RTP/RTCP packet formats plus some trailing protocol fields for security purposes. For SAVPF, all RTCP packets MUST be encapsulated as defined in section 3.4 of [4]. 2.2 Extensions Extensions to AVPF RTCP feedback packets defined elsewhere MAY be used with the SAVPF profile provided that those extensions are in conformance with the extension rules of [3]. Additional extensions (e.g., transforms) defined for SAVP following the rules of section 6 of [4] MAY also be used with the SAVPF profile. The overhead per RTCP packet depends on the extensions and transforms chosen. New extensions and transforms added in the future MAY introduce yet unknown further per-packet overhead. Finally, further extensions specifically to SAVPF MAY be defined elsewhere. 2.3 Implications from combining AVPF and SAVP The AVPF profile aims at -- statistically -- allowing receivers to provide timely feedback to senders. The frequency at which receivers are, on average, allowed to send feedback information depends on the RTCP bandwidth, the group size, and the average size of an RTCP packet. SRTCP (see Section 3.4 of [4]) adds extra fields (some of which are of configurable length) at the end of each RTCP packet that are probably at least some 10 to 20 bytes in size (14 bytes as default). Note that extensions and transforms defined in the future, as well as the configuration of each field length, MAY add greater overhead. By using SRTP, the average size of an RTCP packet will increase and thus reduce the frequency at which (timely) feedback can be provided. Application designers need to be aware of this, and take precautions so that the RTCP bandwidth shares are maintained. This MUST be done by adjusting Ott, Carrara Expires August 2007 [Page 5] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 the RTCP variable "avg_rtcp_size" to reflect the size of the SRTCP packets. 3 SDP Definitions 3.1 Profile Definition The AV profiles defined in [2], [3], and [4] are referred to as "AVP", "AVPF", and "SAVP", respectively, in the context of e.g. the Session Description Protocol (SDP) [3]. The combined profile specified in this document is referred to as "SAVPF". 3.2 Attribute Definitions SDP attributes for negotiating SAVP sessions are defined in [7] and [8]. Those attributes MAY also be used with SAVPF. The rules defined in [7] and [8] apply. SDP attributes for negotiating AVPF sessions are defined in [3]. Those attributes MAY also be used with SAVPF. The rules defined in [3] apply. 3.3 Profile Negotiation Session descriptions for RTP sessions may be conveyed using protocols dedicated for multimedia communications such as the SDP offer/answer model [9] used with SIP, RTSP [10], or SAP [11] but may also be distributed using email, NetNews, web pages, etc. The offer/answer model allows the resulting session parameters to be negotiated using the SDP attributes defined in [7] and [8]. In the following subsection, the negotiation process is described in terms of the offer/answer model. Afterwards, the cases that do not use the offer/answer model are addressed: RTSP-specific negotiation support is provided by [7] as discussed in subsection 3.3.2 and support for SAP announcements (with no negotiation at all) is addressed in subsection 3.3.3. 3.3.1 Offer/Answer-based Negotiation of Session Descriptions Negotiations (e.g. of RTP profiles, codecs, transport addresses, etc.) are carried out on a per-media session basis (i.e. per m= line in SDP). If negotiating one media session fails, others MAY still succeed. Ott, Carrara Expires August 2007 [Page 6] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 Different RTP profiles MAY be used in different media sessions. For negotiation of a media description, the four profiles AVP, AVPF, SAVP, and SAVPF are mutually exclusive. Note, however, that SAVP and SAVPF entities MAY be mixed in a single RTP session (see section 4). Also, the offer/answer mechanism MAY be used to offer alternatives for the same media session (e.g. using the same transport parameters) and allow the answered to choose one of the profiles. An offerer that is capable of supporting multiple of these profiles for a certain media session SHOULD always offer all alternatives acceptable in a certain situation. The alternatives SHOULD be listed in order of preference and the offerer SHOULD prefer secure profiles over non-secure ones. The offer SHOULD NOT include both a secure alternative (SAVP and SAVPF) and an insecure alternative (e.g. AVP and AVPF) in the same offer as this may enable bidding down and other attacks. Therefore, if both secure and non-secure RTP profiles shall be offered (e.g., for best-effort SRTP [14]), care SHOULD be taken to appropriately protect the negotiation signaling.. If an offer contains multiple alternative profiles the answerer MUST select exactly only one and reject the other(s), e.g., by setting the port number in the respect m= line to 0. If supported, the answerer SHOULD prefer a secure profile over non-secure ones. Among the secure or insecure profiles, the answerer SHOULD select the first acceptable alternative to respect the preference of the offerer. If a media description in an offer uses SAVPF and the answerer does not support SAVPF, the media session MUST be rejected. If a media description in an offer does not use SAVPF but the answerer wants to use SAVPF, the answerer MUST reject the media session. The answerer MAY provide a counter-offer with a media description indicating SAVPF in a subsequently initiated offer/answer exchange. 3.3.2 RTSP-based Negotiation of Session Descriptions RTSP [10] does not support the offer/answer model. However, RTSP supports exchanging media session parameters (including profile and address information) by means of the "Transport:" header. SDP- based key management as defined in [7] adds an RTSP header (KeyMgmt:) to support conveying a key management protocol (including keying material). Ott, Carrara Expires August 2007 [Page 7] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 The RTSP "Transport:" header MAY be used to determine the profile for the media session. Conceptually, the rules defined in section 3.3.1 apply accordingly. Detailed operation is as follows: An SDP description (e.g., retrieved from the RTSP server by means of DESCRIBE) contains the description of the media streams of the particular RTSP resource. To offer two or more alternative RTP profiles for a particular media stream, the SDP description MUST contain exactly one m= line for this media stream for each profile and all the same transport address (IP address and port number). The profiles SHOULD be listed in the order of preference. This is similar to formulating an offer per section 3.3.1. The RTSP client MUST select exactly one of the profiles per media stream it wants to receive. It MUST do so in the SETUP request. The RTSP client MUST indicate the chosen RTP profile by indicating the profile and the full server transport address (IP address and port) in the Transport: header included in the SETUP request. The RTSP server's response to the client's SETUP message MUST confirm this profile selection or refuse the SETUP request (the latter of which it should not do after offering the profiles in the first place). Note: To change any of the profiles in use, the client needs tear down the RTSP session (using the TEARDOWN method) and re- establish it using SETUP. This may change as soon as media updating (similar to a SIP UPDATE or re-INVITE) becomes specified. When using the SDP key management [7], the keymgmt: header MUST be included in the appropriate RTSP messages if a secure profile is chosen. If different secure profiles are offered in the SDP description (e.g., SAVP and SAVPF) and different keying material is provided for these, after choosing one profile in the SETUP message, only the keymgmt: header for the chosen one MUST be provided. The rules for matching keymgmt: headers to media streams according to [7] apply. 3.3.3 Announcing Session Descriptions Protocols that do not allow negotiate session descriptions interactively (e.g. SAP [11], descriptions posted on a web page or sent by mail) pose the responsibility for adequate access to the media sessions on the initiator of a session. The initiator SHOULD provide alternative session descriptions for multiple RTP profiles as far as acceptable to the application and the purpose of the session. If security is desired, SAVP may be offered as alternative to SAVPF -- but AVP or AVPF sessions SHOULD Ott, Carrara Expires August 2007 [Page 8] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 NOT be announced unless other security means not relying on SRTP are employed. The SDP attributes defined in [7] and [8] may also be used for the security parameter distribution of announced session descriptions. The security scheme description defined in [8] requires a secure communications channel to prevent third parties from eavesdropping on the keying parameters and manipulation. Therefore, SAP security (as defined in [11]), S/MIME [12], HTTPS [13], or other suitable mechanisms SHOULD be used for distributing or accessing these session descriptions. 3.3.4 Describing Alternative Session Profiles SAVP and SAVPF entities MAY be mixed in the same RTP session (see also section 4) and so MAY AVP and AVPF entities. Other combinations -- i.e. between secure and insecure profiles -- in the same RTP session are incompatible and MUST NOT be used together. If negotiation between the involved peers is possible (as with the offer/answer model per section 3.3.1 or RTSP per section 3.3.2), alternative (secure and non-secure) profiles MAY be specified by one entity (e.g., the offerer) and a choice of one profile MUST be made by the other. If no such negotiation is possible (e.g., with SAP as per section 3.3.3) incompatible profiles MUST NOT be specified as alternatives. The negotiation of alternative profiles is for further study. RTP profiles MAY be mixed arbitrarily across different RTP sessions. 3.4 Examples Example 1: The following session description indicates a secure session made up from audio and DTMF for point-to-point communication in which the DTMF stream uses Generic NACKs. The key management protocol indicated is MIKEY. This session description (the offer) could be contained in a SIP INVITE or 200 OK message to indicate that its sender is capable of and willing to receive feedback for the DTMF stream it transmits. The corresponding answer may be carried in a 200 OK or an ACK. The parameters for the security protocol are negotiated as described by the SDP extensions defined in [7]. Ott, Carrara Expires August 2007 [Page 9] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 v=0 o=alice 3203093520 3203093520 IN IP4 host.example.com s=Media with feedback t=0 0 c=IN IP4 host.example.com m=audio 49170 RTP/SAVPF 0 96 a=rtpmap:0 PCMU/8000 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-16 a=rtcp-fb:96 nack a=key-mgmt:mikey uiSDF9sdhs727ghsd/dhsoKkdOokdo7eWsnDSJD... Example 2: This example shows the same feedback parameters as example 1 but uses the secure descriptions syntax [8]. Note that the key part of the a=crypto attribute is not protected against eavesdropping and thus the session description needs to be exchanged over a secure communication channel. v=0 o=alice 3203093520 3203093520 IN IP4 host.example.com s=Media with feedback t=0 0 c=IN IP4 host.example.com m=audio 49170 RTP/SAVPF 0 96 a=rtpmap:0 PCMU/8000 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-16 a=rtcp-fb:96 nack a=crypto:AES_CM_128_HMAC_SHA1_32 inline:d/16/14/NzB4d1BINUAvLEw6UzF3WSJ+PSdFcGdUJShpX1Zj/2^20/1 :32 Example 3: This example is replicated from example 1 above but shows the interaction between the offerer and the answered in an offer/answer exchange, again using MIKEY to negotiate the keying material: Ott, Carrara Expires August 2007 [Page 10] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 Offer: v=0 o=alice 3203093520 3203093520 IN IP4 host.example.com s=Media with feedback t=0 0 c=IN IP4 host.example.com a=key-mgmt:mikey uiSDF9sdhs727ghsd/dhsoKkdOokdo7eWsnDSJD... m=audio 49170 RTP/SAVPF 0 96 a=rtpmap:0 PCMU/8000 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-16 a=rtcp-fb:96 nack Answer: v=0 o=alice 3203093521 3203093521 IN IP4 host.another.example.com s=Media with feedback t=0 0 c=IN IP4 host.another.example.com a=key-mgmt:mikey ushdgfdhgfuiweyfhjsgdkj2837do7eWsnDSJD... m=audio 53012 RTP/SAVPF 0 96 a=rtpmap:0 PCMU/8000 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-16 a=rtcp-fb:96 nack Example 4: This example shows the exchange for video streaming controlled via RTSP. A client inquires a media description from a server using DESCRIBE and obtains a static SDP description without any keying parameters but the media description shows that both secure and non-secure media sessions using (S)AVPF are available. Note that a future grouping mechanism will allow to explicitly identify these as alternatives in the session description. The client then issues a SETUP request and indicates its choice by including the respective profile in the Transport parameter. Furthermore, the client includes a KeyMgmt: header to convey its security parameters which is matched by a corresponding KeyMgmt header from the server in the response. Only a single media session is chosen so that the aggregate RTSP URI is sufficient for identification; if several media sessions shall use different keying material, the a=control: attribute needs to be included in the SDP description. Ott, Carrara Expires August 2007 [Page 11] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 RTSP DESCRIBE request-response pair (optional): DESCRIBE rtsp://movies.example.org/example RTSP/2.0 CSeq: 314 Accept: application/sdp 200 OK CSeq: 314 Date: 25 Nov 2005 22:09:35 GMT Content-Type: application/sdp Content-Length: 316 v=0 o=alice 3203093520 3203093520 IN IP4 movies.example.com s=Media with feedback t=0 0 c=IN IP4 0.0.0.0 m=video 49170 RTP/SAVPF 96 a=rtpmap:96 H263-2000/90000 a=rtcp-fb:96 nack m=video 49172 RTP/AVPF 96 a=rtpmap:96 H263-2000/90000 a=rtcp-fb:96 nack RTSP SETUP request-response pair SETUP rtsp://movies.example.org/example RTSP/2.0 CSeq: 315 Transport: RTP/SAVPF;unicast;dest_addr=":53012"/":53013" KeyMgmt: prot=mikey;url="rtsp://movies.example.org/example"; data="uiSDF9sdhs727ghsd/dhsoKkdOokdo7eWsnD..." 200 OK CSeq: 315 Date: 25 Nov 2005 22:09:36 GMT Session: 4711 Transport: RTP/SAVPF;unicast;dest_addr=":53012"/":53013"; src_addr="192.0.2.15:60000"/"192.0.2.15:60001" KeyMgmt: prot=mikey;url="rtsp://movies.example.org/example"; data="ushdgfdhgfuiweyfhjsgdkj2837do7eWsnDSJD..." Accept-Ranges: NPT, SMPTE Example 5: The following session description indicates a multicast audio/video session (using PCMU for audio and either H.261 or H.263+) with the video source accepting Generic NACKs for both codecs and Reference Picture Selection for H.263. The parameters for the security protocol are negotiated as described by the SDP extensions defined in [7], used at the session level. Such a Ott, Carrara Expires August 2007 [Page 12] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 description may have been conveyed using the Session Announcement Protocol (SAP). v=0 o=alice 3203093520 3203093520 IN IP4 host.example.com s=Multicast video with feedback t=3203130148 3203137348 a=key-mgmt:mikey uiSDF9sdhs7494ghsd/dhsoKkdOokdo7eWsnDSJD... m=audio 49170 RTP/SAVP 0 c=IN IP4 224.2.1.183 a=rtpmap:0 PCMU/8000 m=video 51372 RTP/SAVPF 98 99 c=IN IP4 224.2.1.184 a=rtpmap:98 H263-1998/90000 a=rtpmap:99 H261/90000 a=rtcp-fb:* nack a=rtcp-fb:98 nack rpsi 4 Interworking of AVP, SAVP, AVPF, and SAVPF Entities The SAVPF profile defined in this document is a combination of the SAVP profile [4] and the AVPF profile [3](which in turn is an extension of the RTP profile as defined in [2]). SAVP and SAVPF use SRTP [4] to achieve security. AVP and AVPF use plain RTP [1] and hence do not provide security (unless external security mechanisms are applied as discussed in section 9.1 of [1]). SRTP and RTP are not meant to interoperate, the respective protocol entities are not supposed to be part of the same RTP session. Hence, AVP and AVPF on one side and SAVP and SAVPF on the other MUST NOT be mixed. RTP entities using the SAVP and the SAVPF profiles MAY be mixed in a single RTP session. The interworking considerations defined in section 5 of [3] apply. 5 Security Considerations The SAVPF profile inherits its security properties from the SAVP profile; therefore it is subject to the security considerations discussed in [4]. The SAVP profile does not add, nor take away, any security services compared to SAVP. There is a desire to support security for media streams and, at the same time, for backward compatibility with non-SAVP(F) nodes. Application designers should be aware that security SHOULD NOT be traded for interoperability. If information is to be distributed to closed groups (i.e. confidentially protected), it is RECOMMENDED Ott, Carrara Expires August 2007 [Page 13] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 not to offer alternatives for a media session other than SAVP and SAVPF as described in sections 3.3 and 3.4, unless other security mechanisms will be used, e.g. the ones described in Section 9.1 of [1]. Similarly, if integrity protection is considered important, it is RECOMMENDED not to offer the alternatives other than SAVP and SAVPF, unless other mechanisms are known to be in place that can guarantee it, e.g. lower-layer mechanisms as described in Section 9 of [1]. Offering secure and insecure profiles simultaneously may open to bidding down attacks. Therefore, such a mix of profile offer SHOULD NOT be made. Note that the rules for sharing master keys apply as described in [4] (e.g., Section 9.1). In particular, the same rules for avoiding the two-time pad (keystream reuse) apply: a master key MUST NOT be shared among different RTP sessions if the SSRCs used are unique across all the RTP streams of the RTP sessions that share the same master key. The key management MUST be called to provide new master key(s) (previously stored and used keys MUST NOT be used again), or the session MUST be terminated, when 2^48 SRTP packets or 2^31 SRTCP packets have been secured with the same key (whichever occurs before). Different media sessions may use a mix of different profiles, particularly including a secure profile and an insecure profile. However, mixing secure and insecure media sessions may reveal information to third parties and thus the decision to do so MUST be in line with a local security policy. For example, the local policy MUST specify whether it is acceptable to have e.g. the audio stream not secured and the related video secured. The security considerations in [3] are valid too. Note in particular, applying the SAVPF profile implies mandatory integrity protection on RTCP. While this solves the problem of false packets from members not belonging to the group, it does not solve the issues related to a malicious member acting improperly. 6 IANA Considerations The following contact information shall be used for all registrations included here: Contact: Joerg Ott mailto:jo@acm.org tel:+358-9-451-2460 Ott, Carrara Expires August 2007 [Page 14] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 The secure RTP feedback profile as a combination of Secure RTP and the feedback profile needs to be registered for the Session Description Protocol (specifically the type "proto"): "RTP/SAVPF". SDP Protocol ("proto"): Name: RTP/SAVPF Long form: Secure RTP Profile with RTCP-based Feedback Type of name: proto Type of attribute: Media level only Purpose: RFC XXXX Reference: RFC XXXX All the SDP attribute defined for RTP/SAVP and RTP/AVPF are valid for RTP/SAVPF, too. NOTE TO THE RFC EDITOR: Please replace all occurrences of RFC XXXX by the RFC number assigned to this document. 7 Acknowledgements This document is a product of the Audio-Visual Transport (AVT) Working Group of the IETF. The authors would like to thank Magnus Westerlund and Colin Perkins for their comments. 8 Authors' Addresses Joerg Ott mailto:jo@netlab.hut.fi Helsinki University of Technology tel:+358-9-451-2460 Otakaari 5A FI-02150 Espoo Finland Elisabetta Carrara mailto: carrara@kth.se Royal Institute of Technology Stockholm Sweden 9 Bibliography 9.1 Normative references [1] H. Schulzrinne, S. Casner, R. Frederick, and V. Jacobson, "RTP - A Transport Protocol for Real-time Applications," RFC 3550 (STD0064), July 2003. Ott, Carrara Expires August 2007 [Page 15] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 [2] H. Schulzrinne and S. Casner, "RTP Profile for Audio and Video Conferences with Minimal Control," RFC 3551 (STD0065), March 2003. [3] J. Ott, S. Wenger, N. Sato, C. Burmeister, J. Rey, "Extended RTP Profile for RTCP-based Feedback (RTP/AVPF), RFC 4585, July 2006. [4] M. Baugher, D. McGrew, M. Naslund, E. Carrara, K. Norrman, "The Secure Real-time Transport Protocol", RFC 3711, March 2004. [5] S. Bradner, "Key words for use in RFCs to Indicate Requirement Levels," RFC 2119, March 1997. [6] M. Handley, V. Jacobson, and C. Perkins, "SDP: Session Description Protocol", RFC 4566, July 2006. [7] J. Arkko, E. Carrara, F. Lindholm, M. Naslund, and K. Norrman, "Key Management Extensions for Session Description Protocol (SDP) and Real Time Streaming Protocol (RTSP)," RFC 4567, July 2006. [8] F. Andreassen, M. Baugher, and D. Wing, "Session Description Protocol Security Descriptions for Media Streams," RFC 4568, July 2006. [9] J. Rosenberg and H. Schulzrinne, "An offer/answer model with SDP," RFC 3264, June 2002. [10] H. Schulzrinne, A. Rao, and R. Lanphier, "Real Time Streaming Protocol (RTSP)," RFC 2326, April 1998. 9.2 Informative References [11] M. Handley, C. Perkins, and E. Whelan, "Session Announcement Protocol," RFC 2974, October 2000. [12] B. Ramsdell (ed.), "Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.1 Message Specification," RFC 3851, July 2004. [13] E. Rescorla, "HTTP Over TLS," RFC 2818, May 2000. [14] H. Kaplan and F. Audet, "Session Description Protocol (SDP) Offer/Answer Negotiation For Best-Effort Secure Real-Time Transport Protocol," draft-kaplan-mmusic-best-effort-srtp-01, Work in Progress, October 2006. Ott, Carrara Expires August 2007 [Page 16] Internet Draft draft-ietf-avt-profile-savpf-10.txt January 2007 10 IPR Notice The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org. 11 Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 12 Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. 13 Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society. Ott, Carrara Expires August 2007 [Page 17]