Network Working Group P. Hallam-Baker Internet-Draft Comodo Group Inc. Intended status: Informational September 18, 2017 Expires: March 22, 2018 Mathematical Mesh: Application Profiles draft-hallambaker-mesh-app-00 Abstract The use of the Mathematical Mesh to manage cryptographic keys for use with Mail and SSH is described. The format of the application profiles is described with examples. This document is also available online at http://prismproof.org/Documents/draft-hallambaker-mesh-app.html [1] . Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on March 22, 2018. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of Hallam-Baker Expires March 22, 2018 [Page 1] Internet-Draft Mesh/SSH September 2017 the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1. Requirements Language . . . . . . . . . . . . . . . . . . 3 2.2. Related Specifications . . . . . . . . . . . . . . . . . 3 2.3. Defined Terms . . . . . . . . . . . . . . . . . . . . . . 3 2.4. Implementation Status . . . . . . . . . . . . . . . . . . 3 3. Mesh Application Profiles . . . . . . . . . . . . . . . . . . 4 4. Catalog Profiles . . . . . . . . . . . . . . . . . . . . . . 4 4.1. Catalog Example . . . . . . . . . . . . . . . . . . . . . 4 4.2. Credentials . . . . . . . . . . . . . . . . . . . . . . . 5 4.2.1. Credentials Example . . . . . . . . . . . . . . . . . 6 4.3. Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . 6 4.4. Contacts . . . . . . . . . . . . . . . . . . . . . . . . 7 4.4.1. Contacts Example . . . . . . . . . . . . . . . . . . 7 4.5. Calendar . . . . . . . . . . . . . . . . . . . . . . . . 7 5. Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5.1. Mail Example . . . . . . . . . . . . . . . . . . . . . . 9 6. SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6.1. SSH Example . . . . . . . . . . . . . . . . . . . . . . . 10 7. Catalog Application Profiles . . . . . . . . . . . . . . . . 10 7.1. Shared . . . . . . . . . . . . . . . . . . . . . . . . . 10 7.1.1. Structure: ApplicationProfileCatalog . . . . . . . . 10 7.1.2. Structure: CatalogEntry . . . . . . . . . . . . . . . 10 7.1.3. Structure: TypedData . . . . . . . . . . . . . . . . 11 7.2. Credential Catalog . . . . . . . . . . . . . . . . . . . 11 7.2.1. Structure: CredentialProfile . . . . . . . . . . . . 11 7.2.2. Structure: CredentialProfilePrivate . . . . . . . . . 11 7.2.3. Structure: CredentialEntry . . . . . . . . . . . . . 11 7.3. Bookmark Catalog . . . . . . . . . . . . . . . . . . . . 12 7.3.1. Structure: BookmarkProfile . . . . . . . . . . . . . 12 7.3.2. Structure: BookmarkProfilePrivate . . . . . . . . . . 12 7.3.3. Structure: BookmarkEntry . . . . . . . . . . . . . . 12 7.4. Contact Catalog . . . . . . . . . . . . . . . . . . . . . 12 7.4.1. Structure: ContactProfile . . . . . . . . . . . . . . 12 7.4.2. Structure: ContactProfilePrivate . . . . . . . . . . 13 7.4.3. Structure: ContactEntry . . . . . . . . . . . . . . . 13 7.4.4. Structure: PersonalName . . . . . . . . . . . . . . . 13 7.4.5. Structure: Address . . . . . . . . . . . . . . . . . 13 7.4.6. Structure: Internet . . . . . . . . . . . . . . . . . 14 7.4.7. Structure: Postal . . . . . . . . . . . . . . . . . . 14 7.4.8. Structure: ContactPerson . . . . . . . . . . . . . . 14 7.4.9. Structure: ContactOrganization . . . . . . . . . . . 14 7.5. Mail Application Profile Objects . . . . . . . . . . . . 15 Hallam-Baker Expires March 22, 2018 [Page 2] Internet-Draft Mesh/SSH September 2017 7.5.1. Structure: MailProfile . . . . . . . . . . . . . . . 15 7.5.2. Structure: MailDevicePublic . . . . . . . . . . . . . 15 7.5.3. Structure: MailProfilePrivate . . . . . . . . . . . . 15 7.5.4. Structure: MailDevicePrivate . . . . . . . . . . . . 16 7.6. SSH Application Profile Objects . . . . . . . . . . . . . 16 7.6.1. Structure: SSHProfile . . . . . . . . . . . . . . . . 16 7.6.2. Structure: SSHDevicePublic . . . . . . . . . . . . . 17 7.6.3. Structure: SSHProfilePrivate . . . . . . . . . . . . 17 7.6.4. Structure: HostEntry . . . . . . . . . . . . . . . . 17 7.6.5. Structure: SSHDevicePrivate . . . . . . . . . . . . . 17 8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 18 9. Security Considerations . . . . . . . . . . . . . . . . . . . 18 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 18 11. References . . . . . . . . . . . . . . . . . . . . . . . . . 18 11.1. Normative References . . . . . . . . . . . . . . . . . . 18 11.2. Informative References . . . . . . . . . . . . . . . . . 18 11.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 19 1. Introduction 2. Definitions This section presents the related specifications and standard, the terms that are used as terms of art within the documents and the terms used as requirements language. 2.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] . 2.2. Related Specifications The related specifications are described in the Mesh Architecture specification [draft-hallambaker-mesh-architecture] 2.3. Defined Terms No terms of art are defined. 2.4. Implementation Status The implementation status of the reference code base is described in the companion document [draft-hallambaker-mesh-developer] . Hallam-Baker Expires March 22, 2018 [Page 3] Internet-Draft Mesh/SSH September 2017 3. Mesh Application Profiles (Pull piece from Mesh Reference to here) 4. Catalog Profiles Catalog profiles are used to synchronize encrypted data sets across devices. The catalog data model is restricted so as to permit a common set of management tools to be used to access and maintain profiles containing different types of data (bookmarks, credentials, contacts, etc.). Catalogs do not contain per device data. A catalog may not be shared with every device in the user?s profile but all the data in a catalog is available to all the devices with which it is shared. The management operations supported are: Synchronization Permit user to add, delete and update entries from multiple devices with minimal surprise. The mechanism is designed to be reasonably robust if network connectivity is lost during an attempted update. Labelling Allow entries to be grouped into hierarchical categories defined by the user. An entry may be added to more than one category at once. Each catalog entry SHOULD contain exactly one timestamp field of time Added, Updated or Deleted. If present, the timestamp entries and the entry identifiers are used to merge catalog profiles that have been updated separately leading to an inconsistent state. Applications SHOULD specify a timestamp field on every entry unless it is known that update inconsistency cannot occur. For example, when initially populating a catalog. 4.1. Catalog Example Alice creates a new bookmarks profile which is shared between her laptop and her phone. The initial profile is empty: { "BookmarkProfilePrivate": { "Entries": []}} Figure 1 Alice adds a bookmark entry to her profile on the browser on her laptop: Hallam-Baker Expires March 22, 2018 [Page 4] Internet-Draft Mesh/SSH September 2017 { "BookmarkProfilePrivate": { "Entries": [{ "Added": "2017-09-18T13:01:28Z", "Title": "First Site", "Uri": "http://example.com/"}]}} Figure 2 Later, Alice is attempting to connect to a site on her phone but has no network connection. She decides to bookmark the site instead. { "BookmarkProfilePrivate": { "Entries": [{ "Added": "2017-09-18T14:36:06Z", "Title": "Second Site", "Uri": "https://example.com/"}]}} Figure 3 At this point, the profiles on Alice's two devices are out of sync. When the phone is finally able to connect to the network, the profiles are merged: { "BookmarkProfilePrivate": { "Entries": [{ "Added": "2017-09-18T13:01:28Z", "Title": "First Site", "Uri": "http://example.com/"}, { "Added": "2017-09-18T14:36:06Z", "Title": "Second Site", "Uri": "https://example.com/"}]}} Figure 4 4.2. Credentials A credentials catalog contains access credentials, typically usernames and passwords, for a set of network resources such as Web sites that do not support the use of Mesh device profile data for authentication. Mesh/Credential enabled applications SHOULD offer to generate strong passwords for the user if the AutoGenerate field is set to true in the credential profile. Since the use of automatically generated Hallam-Baker Expires March 22, 2018 [Page 5] Internet-Draft Mesh/SSH September 2017 passwords is likely to be inconvenient for users unless all the applications on all the devices they might use support Mesh/ Credential profiles, applications MUST NOT automatically generate passwords unless the user has affirmatively indicated that they want to use them. Further Work: Credential entries MAY specify that the credential is restricted to use with certain protocols (Web browsing, SFTP, etc.) and/or certain authentication mechanisms but the precise means of identifying both is not currently defined. 4.2.1. Credentials Example { "CredentialProfilePrivate": { "AutoGenerate": true, "Entries": [{ "Sites": ["luggage.example.net"], "Username": "Alice", "Password": "12345"}, { "Label": ["Linux"], "Sites": ["host.example.net"], "Username": "BitAlice", "Password": "password", "Protocol": "ssh"}], "NeverAsk": ["secure.example.com", "bank.example.com"]}} Figure 5 4.3. Bookmarks A bookmarks catalog contains a collection of bookmarks that have been saved for later use. While the ability share bookmarks between groups of users has obvious advantages, at present, the implementation and specification are only written with the use of a single user have been considered. A bookmark entry contains the URI of the target and a title. If the book mark entry is a HTML resource, the title is taken from the element in the document header. If network and storage resources permit, catalog entries MAY include a favicon value for easy identification. Further Work: Bookmark entries MAY contain details describing the security properties of the connection to protect against downgrade Hallam-Baker Expires March 22, 2018 [Page 6] Internet-Draft Mesh/SSH September 2017 attack. For example, information from HTTP strict security [RFC6797] and key pinning headers [RFC7460] . tbs 4.4. Contacts A contacts catalog contains a collection of contacts. The ContactEntry object contains the usual fields for describing the person or organization the entry refers to, and means of contact (Internet, Postal). One significant deviation from existing formats is that the fact that people change names (e.g. marriage) is captured and that means of contact MAY be scoped to a particular organization. 4.4.1. Contacts Example { "ContactProfilePrivate": { "Entries": [{ "Personals": [{ "First": "Alice"}], "Internets": [{ "Uri": "mailto:alice@example.com"}]}, { "Personals": [{ "First": "Bob"}], "Internets": [{ "Uri": "mailto:bob@example.com"}]}]}} Figure 6 4.5. Calendar It is generally acknowledged that representation of calendar information is a ?difficult? problem. Since it is the author?s experience that such problems almost invariably arise from an attempt to make use of an inadequate data model, the format for exchange of calendar information is currently undefined. Further Work: Two major causes of difficulty are the use of local time zones and daylight savings, the definition of which are capricious at best. When a recurring meeting is specified it is vital that the time zone in which the meeting is to recur is specified explicitly. Attempts to normalize meetings to a single time zone will inevitably fail when the definition of time changes between the time the meeting is called and the meeting is held. Hallam-Baker Expires March 22, 2018 [Page 7] Internet-Draft Mesh/SSH September 2017 Another major limitation in existing formats is the lack of understanding that when the user travels, at least some part of their context for scheduling also changes. It should be possible to integrate all parts of the user?s schedule to offer alerts and reminders appropriate to their current location. 5. Mail Mesh Mail profiles serve two distinct purposes: o To provision a user?s devices with the credentials, network configuration and cryptographic keys necessary to support use of mail and end-to-end mail security enhancements. o To publish necessary information for use by mail senders. o While the principle focus of Mesh/Mail is to support exchange of mail over SMTP protocol, any infrastructure that provides a mechanism for publishing a recipient?s public keys for use by senders can, at least in principle, also publish information describing the user?s mail capabilities including the ability to support new messaging protocols. o The use of end-to-end secure protocols requires the generation and use of at least one public key pair for signature and encryption. Best current practices require the use of separate keypairs for signature and encryption and if practical separate signature keys for each device. o Since S/MIME and OpenPGP as currently specified do not support the use of Proxy Re-Encryption (recryption) to enable separate the use of separate decryption keys for each device, a single encryption keypair is used. A mail profile must therefore contain an encrypted copy of the corresponding decryption key for each device. o Further Work: Support Signal etc. At present the profiles are not differentiated on a per device level. It is likely that it would be useful to specify that certain devices are to carry a complete copy of the user?s mail while others should only carry messages from the last few weeks or months. It is also likely that it would be useful to be able to mark certain selections as being likely to be most useful offline. Hallam-Baker Expires March 22, 2018 [Page 8] Internet-Draft Mesh/SSH September 2017 5.1. Mail Example 6. SSH The Secure Shell (SSH) transport layer protocol [RFC4253] is widely used as a mechanism for securing access to remote hosts. In addition to providing a terminal connection to a remote host, SSH also supports file transfer and remote access (VPN) functionality. It is also used to provide remote procedure call (RPC) capabilities in applications such as Git. While SSH permits a high level of security to be achieved, achieving a high security configuration requires a considerable degree of attention to detail. Numerous ?how to? guides found on the Internet advise the user to engage in many unsafe practices. These include: Using a single private key for authentication for every machine to be used as a client. Emailing a copy of the authentication key to yourself to transfer it to a new machine. (Alternatively use of insecure FTP, copying the data to /temp, etc.) Of equal concern was the fact that none of the guides mentioned any form of maintenance activity such as deleting authentication keys for a decommissioned device or performing a rekey operation in the case that a device is compromised. Configuring SSH securely is a non-trivial task because SSH is the tool through which the administrator will be connecting to secure their system. This is a bootstrap problem: It is easy to solve the problem of SSH configuration once we have SSH configured for use. To enable SSH access to a machine without creating an insecure path first is not a trivial matter. A Mesh/SSH profile contains three sets of information: o A set of the user?s public authentication keys. This is used to generate auth_hosts files and equivalents to enable the user to access machines. o A set of hosts known to the user. This is encrypted as it shows the machines that the user at least is likely to visit. This is used to generate known_hosts files and equivalents to enable the user to authenticate hosts. Hallam-Baker Expires March 22, 2018 [Page 9] Internet-Draft Mesh/SSH September 2017 o A set of device key entries. The entry for each host is encrypted. This is used to create the private key file(s) for the user on each of their devices. 6.1. SSH Example 7. Catalog Application Profiles Catalogues are application profiles that consist of a set of related information (contacts, passwords, bookmarks) but do not contain any cryptographic private keys or device specific data. These restrictions allow management of these profiles to be simplified. 7.1. Shared The following objects are common to multiple profiles. 7.1.1. Structure: ApplicationProfileCatalog Inherits: ApplicationProfile Base class for all application profiles that are tied to an account profile AccountIdentifier: String (Optional) The account to which this profile is bound PersonalUDF: String (Optional) The person to which this profile is bound 7.1.2. Structure: CatalogEntry ID: String (Optional) Unique identifier for the entry. If present, overrides the identifier specified in the entry. Added: DateTime (Optional) The time the site was added Updated: DateTime (Optional) The last time the entry was updated Deleted: DateTime (Optional) The last time the entry was updated Label: String [0..Many] Labels identifying the group(s) that the entry is filed under Source: TypedData [0..Many] Source data for the entry Hallam-Baker Expires March 22, 2018 [Page 10] Internet-Draft Mesh/SSH September 2017 7.1.3. Structure: TypedData ContentType: String (Optional) IANA Content Type identifier Data: Binary (Optional) The described data 7.2. Credential Catalog Profile for recording access credentials for Web sites and other projects. Currently this is limited to usernames and passwords but could expand to include other credential forms. 7.2.1. Structure: CredentialProfile Inherits: ApplicationProfileCatalog Stores usernames and passwords. There are no public fields. [No fields] 7.2.2. Structure: CredentialProfilePrivate Inherits: ApplicationProfilePrivate Private part of the profile. AutoGenerate: Boolean (Optional) If true, a client MAY offer to automatically generate strong (i.e. not memorable) passwords for a user. A user would not normally want to use this feature unless they have access to Mesh password management on every device they use to browse the Web Entries: CredentialEntry [0..Many] A list of password credential entries. NeverAsk: String [0..Many] A list of domain names of sites for which clients MUST NOT ask to store passwords for. 7.2.3. Structure: CredentialEntry Inherits: CatalogEntry Username password entry for a single site Sites: String [0..Many] DNS name of site *.example.com matches www.example.com etc. Username: String (Optional) Case sensitive username Hallam-Baker Expires March 22, 2018 [Page 11] Internet-Draft Mesh/SSH September 2017 Password: String (Optional) Case sensitive password. Protocol: String (Optional) Protocol identifier, e.g. http, sftp, ssh, etc. 7.3. Bookmark Catalog Profile for recording Web site bookmarks and related information. 7.3.1. Structure: BookmarkProfile Inherits: ApplicationProfileCatalog Stores Web site bookmarks in a hierarchical [No fields] 7.3.2. Structure: BookmarkProfilePrivate Inherits: ApplicationProfilePrivate Private part of the profile. Entries: BookmarkEntry [0..Many] The bookmark entries 7.3.3. Structure: BookmarkEntry Inherits: CatalogEntry Bookmark entry for a single site Title: String (Optional) The resource name Uri: String (Optional) The resource identifier ImageUDF: String [0..Many] UDF fingerprint of related favicon image 7.4. Contact Catalog Profile for recording user contact information 7.4.1. Structure: ContactProfile Inherits: ApplicationProfileCatalog Stores Web site bookmarks in a hierarchical [No fields] Hallam-Baker Expires March 22, 2018 [Page 12] Internet-Draft Mesh/SSH September 2017 7.4.2. Structure: ContactProfilePrivate Inherits: ApplicationProfilePrivate Private part of the profile. Entries: ContactEntry [0..Many] The contact entries 7.4.3. Structure: ContactEntry Inherits: CatalogEntry Contact entry Personals: PersonalName [0..Many] Personals: PersonalName [0..Many] MeshUDFs: String [0..Many] List of mesh profiles fingerprints for the user. Internets: Internet [0..Many] List of Internet, telephone, etc addresses for contacting this party Postals: Postal [0..Many] List of postal addresses for this party 7.4.4. Structure: PersonalName First: String (Optional) First: String (Optional) Last: String (Optional) Last: String (Optional) Midle: String (Optional) 7.4.5. Structure: Address Label: String [0..Many] Labels identifying the modes in which the label may be used e.g. Home, Business, Mobile Attributes: String [0..Many] Attributes describing the mode in which the contact address may be used. Hallam-Baker Expires March 22, 2018 [Page 13] Internet-Draft Mesh/SSH September 2017 7.4.6. Structure: Internet Inherits: Address Inherits: Address Uri: String (Optional) The resource identifier describing the mode of contact 7.4.7. Structure: Postal Inherits: Address Inherits: Address Adressee: String (Optional) The postal name Street: String (Optional) Street name and number Town: String (Optional) Name of town or city Region: String (Optional) State, county, department or other government unit. Country: String (Optional) The country name Code: String (Optional) The ISO 3 letter country code 7.4.8. Structure: ContactPerson Inherits: ContactEntry Contact entry for a single person FullName: String (Optional) The name of the person Organization: String [0..Many] The name of the organizations the person is associated with 7.4.9. Structure: ContactOrganization Inherits: ContactEntry Contact entry for a single organization FullName: String (Optional) The name of the organization Hallam-Baker Expires March 22, 2018 [Page 14] Internet-Draft Mesh/SSH September 2017 7.5. Mail Application Profile Objects Profiles that describe mail user agent configuration 7.5.1. Structure: MailProfile Inherits: ApplicationProfile Public profile describes mail receipt policy. Private describes Sending policy EncryptionPGP: PublicKey (Optional) The current OpenPGP encryption key EncryptionSMIME: PublicKey (Optional) The current S/MIME encryption key 7.5.2. Structure: MailDevicePublic Contains public device description Inherits: ApplicationDevicePublic [No fields] 7.5.3. Structure: MailProfilePrivate Inherits: ApplicationProfilePrivate Describes a mail account configuration Private profile contains connection settings for the inbound and outbound mail server(s) and cryptographic private keys. Public profile may contain security policy information for the sender. EmailAddress: String (Optional) The RFC822 Email address. [e.g. "alice@example.com"] ReplyToAddress: String (Optional) The RFC822 Reply toEmail address. [e.g. "alice@example.com"] When set, allows a sender to tell the receiver that replies to this account should be directed to this address. DisplayName: String (Optional) The Display Name. [e.g. "Alice Example"] Hallam-Baker Expires March 22, 2018 [Page 15] Internet-Draft Mesh/SSH September 2017 AccountName: String (Optional) The Account Name for display to the app user [e.g. "Work Account"] Inbound: Connection [0..Many] The Inbound Mail Connection(s). This is typically IMAP4 or POP3 If multiple connections are specified, the order in the sequence indicates the preference order. Outbound: Connection [0..Many] The Outbound Mail Connection(s). This is typically SMTP/SUBMIT If multiple connections are specified, the order in the sequence indicates the preference order. Sign: PublicKey [0..Many] The public keypair(s) for signing and decrypting email. If multiple public keys are specified, the order indicates preference. Encrypt: PublicKey [0..Many] The public keypairs for encrypting and decrypting email. If multiple public keys are specified, the order indicates preference. 7.5.4. Structure: MailDevicePrivate Private data specific to the device Inherits: ApplicationDevicePrivate [No fields] 7.6. SSH Application Profile Objects Profiles that describe SSH user agent configuration 7.6.1. Structure: SSHProfile Application profile for SSH. This is an initial cut of the profile and will need revision. In particular, a sysadmin with a very large number of hosts they are accessing will need some means of avoiding combinatorial explosion. Inherits: ApplicationProfile Hallam-Baker Expires March 22, 2018 [Page 16] Internet-Draft Mesh/SSH September 2017 [No fields] 7.6.2. Structure: SSHDevicePublic Contains public device description Inherits: ApplicationDevicePublic Inherits: ApplicationDevicePublic PublicKey: PublicKey (Optional) Public authentication key for a device. 7.6.3. Structure: SSHProfilePrivate Private portion or profile. Inherits: ApplicationProfilePrivate Inherits: ApplicationProfilePrivate Account: String (Optional) The account to which the profile is bound HostEntries: HostEntry [0..Many] Hosts bound to the profile 7.6.4. Structure: HostEntry Describe a host connected to the SSH profile. This is a machine that the user will access using the credential. Inherits: Entry Inherits: Entry Address: String (Optional) The DNS address or IP address of the host AlgorithmID: String (Optional) The SSH Algorithm identifier PublicKey: String (Optional) The Base64 encoded public key 7.6.5. Structure: SSHDevicePrivate Private data specific to the device Inherits: ApplicationDevicePrivate Inherits: ApplicationDevicePrivate Hallam-Baker Expires March 22, 2018 [Page 17] Internet-Draft Mesh/SSH September 2017 DevicePrivateKey: PublicKey (Optional) A private keypair or keypair contribution created for exclusive use of this device. KeyUDF: String (Optional) Fingerprint of device that this key corresponds to. 8. Acknowledgements Your name could appear here. 9. Security Considerations [This is just a sketch for the present.] 10. IANA Considerations [TBS list out all the code points that require an IANA registration] 11. References 11.1. Normative References [draft-hallambaker-mesh-architecture] Hallam-Baker, P., "Mathematical Mesh: Architecture", draft-hallambaker-mesh-architecture-03 (work in progress), May 2017. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. [RFC4253] Ylonen, T. and C. Lonvick, "The Secure Shell (SSH) Transport Layer Protocol", RFC 4253, DOI 10.17487/RFC4253, January 2006. [RFC6797] Hodges, J., Jackson, C., and A. Barth, "HTTP Strict Transport Security (HSTS)", RFC 6797, DOI 10.17487/RFC6797, November 2012. [RFC7460] Chandramouli, M., Claise, B., Schoening, B., Quittek, J., and T. Dietz, "Monitoring and Control MIB for Power and Energy", RFC 7460, DOI 10.17487/RFC7460, March 2015. 11.2. Informative References Hallam-Baker Expires March 22, 2018 [Page 18] Internet-Draft Mesh/SSH September 2017 [draft-hallambaker-mesh-developer] Hallam-Baker, P., "Mathematical Mesh: Reference Implementation", draft-hallambaker-mesh-developer-04 (work in progress), September 2017. 11.3. URIs [1] http://prismproof.org/Documents/draft-hallambaker-mesh-app.html Author's Address Phillip Hallam-Baker Comodo Group Inc. Email: philliph@comodo.com Hallam-Baker Expires March 22, 2018 [Page 19]