TOC 
Network Working GroupT. Clancy
Internet-DraftLTS
Intended status: Standards TrackA. Lior, Ed.
Expires: November 11, 2010BWS
 G. Zorn
 Network Zen
 K. Hoeper
 Motorola, Inc.
 May 10, 2010


EAP Method Support for Transporting AAA Payloads
draft-clancy-emu-aaapay-04.txt

Abstract

This document defines bindings for existing EAP methods to transport Diameter AVPs, called "AAA payloads". The primary application is to support EAP channel bindings, but this could be used for other applications as well.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on November 11, 2010.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.



Table of Contents

1.  Introduction

2.  Terminology

3.  Overview and Requirements

4.  AAA Payload Format

5.  Bindings Requirements for EAP Methods

6.  Bindings for Existing EAP Methods
    6.1.  Generalized Pre-Shared Key (GPSK)
    6.2.  Pre-Shared Key (PSK)
    6.3.  Password Authenticated Exchange (PAX)
    6.4.  Tunneled Transport Layer Security (TTLS)
    6.5.  Flexible Authentication via Secure Tunneling (FAST)

7.  Security Considerations

8.  IANA Considerations

9.  References
    9.1.  Normative References
    9.2.  Informative References

§  Authors' Addresses




 TOC 

1.  Introduction

This document defines a payload which can be securely transported by an Extensible Authentication Method (EAP) method [RFC3748] (Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and H. Levkowetz, “Extensible Authentication Protocol (EAP),” June 2004.) that carries arbitrary Diameter Attribute-Value Pairs (AVPs) [RFC3588] (Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. Arkko, “Diameter Base Protocol,” September 2003.). While it may seem strange for EAP to encapsulate Authorization, Authentication, and Accounting (AAA) messages, since AAA typically encapsulates EAP, the security properties are different. In particular, AAA data transported by EAP between the client and server will be protected by an end-to-end security relationship. This provides a secure channel for doing things like channel bindings [RFC5056] (Williams, N., “On the Use of Channel Bindings to Secure Channels,” November 2007.).



 TOC 

2.  Terminology

In this document, several words are used to signify the requirements of the specification. These words are often capitalized. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).



 TOC 

3.  Overview and Requirements

Many EAP [RFC3748] (Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and H. Levkowetz, “Extensible Authentication Protocol (EAP),” June 2004.) methods have extensible properties that allow you to embed arbitrary data within a secure channel. This channel is secured using keys derived during the EAP authentication. These channels vary in the properties that they provide, typically either providing integrity protection or both confidentiality and integrity protection.

In this document we define a payload format for encapsulating Diameter AVPs [RFC3588] (Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. Arkko, “Diameter Base Protocol,” September 2003.), and via backwards compatability [RFC4005] (Calhoun, P., Zorn, G., Spence, D., and D. Mitton, “Diameter Network Access Server Application,” August 2005.), RADIUS TLVs [RFC2865] (Rigney, C., Willens, S., Rubens, A., and W. Simpson, “Remote Authentication Dial In User Service (RADIUS),” June 2000.). We provide bindings for a variety of existing EAP methods that would allow them to transport this data. One specific application of this is to support EAP channel bindings [RFC5056] (Williams, N., “On the Use of Channel Bindings to Secure Channels,” November 2007.)[I‑D.ietf‑emu‑chbind] (Clancy, T. and K. Hoeper, “Channel Binding Support for EAP Methods,” October 2009.).

The main goal is to provide the peer and server to exchange AAA messages protected by an end-to-end security association. As such, any EAP method transporting the AAA payloads defined in this document MUST support integrity protection. To accomplish this, a method supporting AAA payloads MUST perform mutual authentication and derive session keys (i.e. MSK, etc), and during this derivation process MUST derive a unique, cryptographically independent, fresh key for protecting AAA payloads. Protocols SHOULD also support confidentiality in addition to integrity protection. Confidentiality is important for identity protection, as a variety of identities can be passed over this channel.



 TOC 

4.  AAA Payload Format

This section describes the formatting for the AAA Payloads. Each payload consists of the following fields:

The version field is 1 octet. This documents defines version 0x01.

The flags field is 1 octet, and is the logical AND of the following applicable values:

The validation flag fields are used by the EAP server to convey the success of the consistency check to the EAP peer. These flags SHOULD NOT be used in messages from the peer to server.

The Session-ID field is arbitrary length and is proceeded by its 2-octet length specified in network-byte order.

Following the Session-ID is an arbitrary number of Diameter AVPs. AVPs already contain a length field internally, so they can be parsed without additional information.

The payload can be graphically depicted as:



--- bit offset --->
 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|  Version=0x01 |     Flags     |       length(Session-ID)      |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
...                         Session-ID                        ...
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
...                       Diameter AVP 1                      ...
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
...                                                           ...
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
...                       Diameter AVP N                      ...
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 Figure 1 



 TOC 

5.  Bindings Requirements for EAP Methods

This section describes a set of general requirements for EAP methods implementing the protected exchange of arbitrary data using the techniques described in this draft.

An EAP method requiring the protected exchange of payloads during its execution in order to enable certain features MUST:

Optionally an EAP method MAY also support an encryption algorithm that is used with a freshly derived encryption key to provide confidentiality of all data that is exchanged in the protected channel.

Only existing EAP methods already satisfying these requirements can support features that require the protected exchange of AAA payloads.

New EAP methods SHOULD be designed to meet all requirements.

For features demanding the protected exchange of potentially large chunks of information, the support of fragmentation is RECOMMENDED.



 TOC 

6.  Bindings for Existing EAP Methods

This section describes how binding tokens can be included in some existing EAP methods that already meet the requirements for secure transport of arbitrary data as specified in Section 5 (Bindings Requirements for EAP Methods).



 TOC 

6.1.  Generalized Pre-Shared Key (GPSK)

EAP-GPSK [RFC5433] (Clancy, T. and H. Tschofenig, “Extensible Authentication Protocol - Generalized Pre-Shared Key (EAP-GPSK) Method,” February 2009.) defines protected data payloads. The protected channel is available in three of its protocol flows, namely EAP-GPSK-2, EAP-GPSK-3, and EAP-GPSK-4, and provides integrity-protection. If a ciphersuite with encryption is selected (e.g. Ciphersuite 1 in [RFC5433] (Clancy, T. and H. Tschofenig, “Extensible Authentication Protocol - Generalized Pre-Shared Key (EAP-GPSK) Method,” February 2009.)) the channel also provides confidentiality.

Use by GPSK simply requires instantiation of a new protected data specifier (PData/Specifier):



 TOC 

6.2.  Pre-Shared Key (PSK)

EAP-PSK [RFC4764] (Bersani, F. and H. Tschofenig, “The EAP-PSK Protocol: A Pre-Shared Key Extensible Authentication Protocol (EAP) Method,” January 2007.) defines a protected channel. In its standard mode, EAP-PSK provides a protected channel for payloads in two of its flows, namely EAP-PSK-2 and EAP-PSK-3. Features requiring additional flows can be supported in EAP-PSK extended authentication mode. The protected channel is integrity-protected and encrypted.

Use by PSK simply requires instantiation of a new EXT_Type value:



 TOC 

6.3.  Password Authenticated Exchange (PAX)

EAP-PAX [RFC4746] (Clancy, T. and W. Arbaugh, “Extensible Authentication Protocol (EAP) Password Authenticated Exchange,” November 2006.) provides an authenticated data exchange (ADE) in three of its protocol flows (EAP-PAX-2, EAP-PAX-3, and EAP-PAX-4). The channel provides integrity-protection but no encryption. Channel binding is explicitly supported in EAP-PAX, in which case the ADE flag needs to be set, and the ADE TYPE needs to be set to 0x02 for client channel binding data and to 0x03 for server channel binding data.

Additional features could be supported by instantiation of a new ADE type:



 TOC 

6.4.  Tunneled Transport Layer Security (TTLS)

EAP-TTLS [RFC5281] (Funk, P. and S. Blake-Wilson, “Extensible Authentication Protocol Tunneled Transport Layer Security Authenticated Protocol Version 0 (EAP-TTLSv0),” August 2008.) uses Diameter Attribute-Value-Pairs (AVPs) for its messaging. As such it natively supports transporting AAA payloads. Once the TLS tunnel is established, a variable number of flows can be exchanged in the second phase, e.g. to exchange payloads in an integrity-protected and encrypted channel. No protocol changes are necessary.



 TOC 

6.5.  Flexible Authentication via Secure Tunneling (FAST)

EAP-FAST [RFC4851] (Cam-Winget, N., McGrew, D., Salowey, J., and H. Zhou, “The Flexible Authentication via Secure Tunneling Extensible Authentication Protocol Method (EAP-FAST),” May 2007.) uses Type-Length-Values (TLVs) for its messaging. Once the TLS tunnel is established a variable number of flows can be exchanged in the second phase, e.g. to exchange payloads in an integrity-protected and encrypted channel. To embed binding tokens, a new TLV must be defined:



 TOC 

7.  Security Considerations

Section 3 documented a variety of requirements for EAP methods to transport these AAA payloads. They MUST support identity protection of arbitrary payloads, and SHOULD support confidentiality. Each method's security considerations section would detail how they achieve those requirements.

The payload includes the EAP Session-ID field. This is to prevent replay attacks. In particular, depending on how an EAP method implements their secured channel, it may or may not be cryptographically bound to the rest of the session. By explicitly including the EAP Session-ID, we prevent replay attacks. Implementations MUST verify the consistency of the Session-ID received in the AAA payloads.

Certainly there are a whole host of issues surrounding the security of what may be contained within the AAA payload format. If the information being transported requires confidentiality, then the method SHOULD support that. Otherwise sensitive data could be disclosed.



 TOC 

8.  IANA Considerations

We require registry from a variety of IANA repositories.

From "EAP-GPSK PData/Specifier":

From "EAP EXT_Type Numbers":

From "EAP-PAX ADE Type Namespace":

From "EAP-FAST TLV Types":



 TOC 

9.  References



 TOC 

9.1. Normative References

[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).
[RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. Arkko, “Diameter Base Protocol,” RFC 3588, September 2003 (TXT).
[RFC3748] Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and H. Levkowetz, “Extensible Authentication Protocol (EAP),” RFC 3748, June 2004 (TXT).


 TOC 

9.2. Informative References

[RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, “Remote Authentication Dial In User Service (RADIUS),” RFC 2865, June 2000 (TXT).
[RFC4764] Bersani, F. and H. Tschofenig, “The EAP-PSK Protocol: A Pre-Shared Key Extensible Authentication Protocol (EAP) Method,” RFC 4764, January 2007 (TXT).
[RFC4005] Calhoun, P., Zorn, G., Spence, D., and D. Mitton, “Diameter Network Access Server Application,” RFC 4005, August 2005 (TXT).
[RFC4746] Clancy, T. and W. Arbaugh, “Extensible Authentication Protocol (EAP) Password Authenticated Exchange,” RFC 4746, November 2006 (TXT).
[RFC4851] Cam-Winget, N., McGrew, D., Salowey, J., and H. Zhou, “The Flexible Authentication via Secure Tunneling Extensible Authentication Protocol Method (EAP-FAST),” RFC 4851, May 2007 (TXT).
[RFC5056] Williams, N., “On the Use of Channel Bindings to Secure Channels,” RFC 5056, November 2007 (TXT).
[RFC5281] Funk, P. and S. Blake-Wilson, “Extensible Authentication Protocol Tunneled Transport Layer Security Authenticated Protocol Version 0 (EAP-TTLSv0),” RFC 5281, August 2008 (TXT).
[RFC5433] Clancy, T. and H. Tschofenig, “Extensible Authentication Protocol - Generalized Pre-Shared Key (EAP-GPSK) Method,” RFC 5433, February 2009 (TXT).
[RFC5247] Aboba, B., Simon, D., and P. Eronen, “Extensible Authentication Protocol (EAP) Key Management Framework,” RFC 5247, August 2008 (TXT).
[I-D.ietf-emu-chbind] Clancy, T. and K. Hoeper, “Channel Binding Support for EAP Methods,” draft-ietf-emu-chbind-04 (work in progress), October 2009.


 TOC 

Authors' Addresses

  T. Charles Clancy
  Laboratory for Telecommunications Sciences
  US Department of Defense
  College Park, MD
  USA
Email:  clancy@LTSnet.net
  
  Avi Lior (editor)
  Bridgewater Systems Corporation
  303 Terry Fox Drive
  Suite 500
  Ottawa, Ontario K2K 3J1
  Canada
Phone:  +1 (613) 591-6655
Email:  avi@bridgewatersystems.com
URI:  http://www.bridgewatersystems.com/
  
  Glen Zorn
  Network Zen
  1310 East Thomas Street
  Seattle, Washington 98102
  US
Phone:  +1 (206) 377-9035
Email:  gwz@net-zen.net
  
  Katrin Hoeper
  Motorola, Inc.
  1301 E. Algonquin Road
  Schaumburg, Illinois 60196
  USA
Email:  khoeper@motorola.com